Error when PDF File is send through SAP to Vendors.

Hi,
We are regularly sending payment advices as PDF File to our Vendors. but from february all of sudden many of vendors are facing issue while opening PDF File.
Some of them are getting Error as "Adobe reader could not open file because it is either not supported file or because file has been damaged(it was sent as an email attachment and wasn't correctly decoded) while some of them are receiving Blank attachment.
Also when we try to send same file to internal id's and our personal Id's we are able to open same. So this is not sap problem as file leaves sap correctly.
What could be reasons they are not able to open same? Also this can't be a problem at recipients end as many of Vendors are facing this problem all of a sudden. Also one more observation when correct file is received size is of 8KB while same when received by Vendors its only of 1 KB.
Please let me know solution for this.
Regards
Tanuja Naik

See the steps to fix the issue here https://getsatisfaction.com/mozilla_messaging/topics/why_does_thunderbird_corrupts_pdf_file_attachments#reply_4197276
Config editor article here if needed https://support.mozilla.org/en-US/kb/config-editor
Tools menu can by "discovered" if missing by pressing Alt+T

Similar Messages

Error: f14627469cba51.pdf file is too large for attachment

Hi,
Recently we migrated lot of crystal reports from BO XI R2 environment to BO 3.1 SP2 FP 2.5 environment, these crystal reports are integrated with the application.
Input parameters are given through the application using the Open Document URL and the report will open through the infoview.
This particular error arises when we try to open the report as PDF using Open Document URL,
Please find the URL below
http://bodev.com/OpenDocument/opendoc/openDocument.jsp?sIDType=CUID&iDocID=AUwcueYTQwtLhWDlil29Nvc&sOutputFormat=P&lsS@INVOICEDATE=1/31/2010&lsS@REFSERVICEID=1&lsS@BILLINGCYCLE=1&lsS@INVPREFIX=SC1001&lsS@GUID=99b18bcb-9470-4a49-948d-73961c149f5e
But we are getting the following error
"f14627469cba51.pdf file is too large for attachment"
Please help me out to resolve the issue.
Thank You,
Palani Kumar
+91-9840865865

Hi Jeff,
Did you figure out the solution to this problem?
I also getting the same problem while refreshing crystal report from 3rd party tool using dswsbobje service session
"Failed to retrieve binary view of the report. 14546ada1c151418.pdf File is too large for attachment. (WRE 02527)"
Please let me know if you find any solution.

Uploading PDF-file from unix to SAP internal table

Hi,
i have to write an abap that sends a pdf-file from a unix (SAP server) by mail to some people.
The mailing part is done, but for creating the attachment. I'm reading the pdf-file into an internal table (in a binary way). Then i'm using this int.table to send the mail.
The email is sent with an attachment, but i cannot open the pdf-file because of an error ( file damaged ). So before sending it by mail, i'm downloading the pdf file to my pc by using WS_DOWNLOAD with the same internal table. The download file gives the same error.
If i look at the size :
- originally pdf file 71743 bytes
- resulting pdf file 71665 bytes (281 lines x 255)
The creation of the internal table is as follows :
open dataset g_file for input in binary mode.
check sy-subrc eq 0.
do.
*    read dataset g_file MAXIMUM LENGTH 255 into wa_pdf.
    read dataset g_file into wa_pdf.
    if sy-subrc ne 0. exit. endif.
    append wa_pdf_hex to i_pdf.
enddo.
close dataset g_file.
where:
types: tt_pdf type table of soli,   "raw 255 long
data: i_pdf type tt_pdf,
         wa_pdf like line of i_pdf
Is there a better way to read in the pdf-file ? Any suggestions ?
regards,
Hans
[email protected]

Hello Hans,
this is a little example from a program to send mail with picture. The problem is the same
form p_create_mail tables itab_html.
data : object_hd_change like sood1 occurs 0 with header line,
         objpara          like selc occurs 0 with header line,
         receivers        like soos1 occurs 0 with header line,
         packing_list     like soxpl occurs 0 with header line,
         fic_attach       like soli occurs 0 with header line,
         struct_user_adress like usaddress ,
         v_file(80) type c ,
         v_buff(255) type c ,
         v_num(9) type n,
         v_length type i ,
         v_total_length type i,
         v_len(9) type n.
move : 'HTM' to object_hd_change-file_ext ,
         'PIOU' to object_hd_change-objdes.
append object_hd_change.
* Find email addr for the username.
loop at s_bname.
    call function 'SUSR_USER_READ'
      exporting
        user_name                  = s_bname-low
      importing
        user_address               = struct_user_adress
      exceptions
        user_name_not_exists       = 1
        internal_error             = 2
        others                     = 3.
    select single smtp_addr
           into receivers-recextnam
           from adr6
           where addrnumber eq struct_user_adress-addrnumber
           and   persnumber eq struct_user_adress-persnumber.
    if sy-subrc eq space.
      move 'U' to receivers-recesc.
      append receivers.
    endif.
endloop.
* Get the picture.
move '/sap_interfaces/D27/pzr_00/data/test/logopharma.gif'
       to v_file.
open dataset v_file for input in binary mode.
do.
    read dataset v_file into v_buff length v_length.
    v_total_length = v_length + v_total_length.
    move v_buff+0(v_length) to fic_attach-line+0(v_length).
    append fic_attach.
    if sy-subrc ne space.
      exit.
    endif.
enddo.
describe table fic_attach lines v_num.
describe field fic_attach-line length v_len.
move : 'Logo' to packing_list-objdes ,
         'Logo' to packing_list-objnam ,
         '1'    to packing_list-body_start ,
         'raw' to packing_list-objtp ,
         'GIF' to packing_list-file_ext .
packing_list-body_num = v_num.
packing_list-objlen   = v_num * v_len.
append packing_list.
* Send mail.
call function 'SO_OBJECT_SEND'
       exporting
           object_hd_change           = object_hd_change
           object_type                = 'RAW'
           owner                      = sy-uname
       tables
           objcont                    = itab_html
           objpara                    = objpara
           receivers                  = receivers
           packing_list               = packing_list
           att_cont                   = fic_attach
       exceptions
           others                     = 01.
endform.                     " P_CREATE_MAIL.
Regards
Frédéric

Error when exporting file from LR5.2 - file created

After updating to LR5.2, I receive an error when exporting files to another disk drive. a file is created, but a warning appears "Unable to Export: "An internal error has occurred: Win32 API error 2 ("The system cannot find the file specified.") when calling ShellExecuteExW from AgWorkspace.shellExecute". I also have CC iunstalled for other applications, but originally installed LR5 as a standalone Adobe application. I tried removing the program and reinstalling through CC, with no change in this behavior.

The answer is in the thread:
http://forums.adobe.com/thread/1303578?tstart=0

LR4.2 - Error when moving files

I can repeatedly reproduce an error when moving files into folders within LR4.2.
My current folder structure is setup like:
F:\pictures\YEAR\Folder name\Sub folder\
When I'm moving files from "Folder name" to "Sub folder" I will be moving approx 6 - 20 photos at a time when sorting them into sub folders. After a while of moving files, LR will stop allowing you to move files and will show up the O symbol with a line through it. Until you close and re-open LR will it allow you to start moving photos again.
I've had this happen 3 times on me now and is completely reproducible. As above, move a small amount of files from a parent folder into a child folder repeatedly and eventually it will refuse to move any more photos until you restart LR.
Windows 7 x64 SP1 Professional
Intel Core i7 950 3.07Ghz
24Gb DDR3 Ram
Nvidia GTX470 Video Card
Intel 520 Series 240Gb SATA3 SSD
Lightroom 4.2 x64
Catalog recently optimised with no issues ever experienced with the catalog.

Hi,
I experienced the same problem and error message this morning ...and found that the following steps will resolve the error (at least when using LR 3 on a MAC):
(1) Open LR and rename all the files that you are trying to move by hitting the F2 button, (MAC shortcut)
(2) Look for any images that may have a '?' mark next to them and resolve if required. (The '?' indicates a file 'location' conflict within the catalogue, - ie you may have moved the files around outside of LR)
(3) While still within LR ....highlight all the files that need to be moved ....and drag and drop them into your preferred new location in the usiual way.
Hope this helps.
Cheers
Simon

Error when creating files for transport request SAPK-700BGINPLMWUI

Hello experts,
We're upgrading our 46c System to ERP 6.0 EHP4.
In Phase EHP_INCLUSION we get the following error Message: Disassembling package queue failed, rc = "2", reason = "Error when creating files for transport request SAPK-700BGINPLMWUI"
We've already checked the SAINT version; Upgrade Fix, SAPCAR version. We've checked our TMS as well and everything seems O.K.
Any help would be really appreciated!!!
Complete Error message:
EhP component PLMWUI, 700
Looking for SAINT package for 'PLMWUI' ...
R3upReadNewPackages:
patchType='U', langVect='DEC'
RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"
RFC Login succeeded
Calling function module "spda_read_new_packages" by RFC
ismovesVersion='0'
R3upReadNewPackages: exit: rc=0
... No matching package found.
R3upReadNewPackages:
patchType='I', langVect='DEC'
RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"
RFC Login succeeded
Calling function module "spda_read_new_packages" by RFC
ismovesVersion='0'
R3upReadNewPackages: exit: rc=0
Found: name = 'PLMWUI', release = '700', package = 'SAPK-700BGINPLMWUI', type = 'AOI'
... Matching package found: 'PLMWUI','700','SAPK-700BGINPLMWUI'
(trc) R3upPatchDisassembleQueue: 1 package queue entries
(trc) R3upPatchDisassembleQueue: force=YES
(trc) R3upPatchDisassembleQueue: 1 packages will be disassembled
Starting disassembling package queue
Date & Time: 20100319133139
Starting RFC Login to: System = "X05", GwHost = "sxt ", GwService = "sapgw00"
RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"
RFC Login succeeded
Calling function module "SPDA_DISASSEMBLE_QUEUE" by RFC
Input table IT_PATQ:
"SAPK-700BGINPLMWUI","000","AOI","PLMWUI","700","SAP PLM Web UI","00"
Call of function module "SPDA_DISASSEMBLE_QUEUE" by RFC succeeded
Logging off from SAP system
Date & Time: 20100319133139
Disassembling package queue failed, rc = "2", reason = "Error when creating files for transport request SAPK-700BGINPLMWUI"

Hello Anthes,
Please Check the things in following sequence :
1.Use latest SAPehpi, R3trans and tp versions.
2. users/group authorization issue and/or ownersip limitations (set 777) .Reboot the server to make sure, that the authorisations are updated and there is no lock on a file in the EHPI dir.Repeat the phase.
Folders where permissions should be 777 are Upgrade directory, Data Directory, Cofile directory and .../EPS/in.
3. Source file corruption can be ruled out by execution
R3trans -l /usr/sap/<SID>/..../abap/data/R-700BGINPLMWUI.SAP (The data file corresponding to the Package which is giving error). Check if this ends fine.
Note 2050
4. Confirm that your transport tool is 'healthy' by testing it in STMS. In SPAM in client 000 use the function Disassemble package and enter the package <Package name>.
5. Try to update the kernel if it not helps.
Best Regards
Niraj

Attaching HTML file and sending through mail

Hi
My Requirement is
I want to attach HTML File and send through mail id's.
But there are number of html files
user can select any one file.
it has to attach and send to the mail id.

Hi V,
check the link:
http://wiki.sdn.sap.com/wiki/display/Snippets/SendEmailwithHTMLattachment.

ORA errors in PDF file

Sir,
I have the ORA-ERRORS in .pdf file, but the version is for Oracle 8i database.
Someone knows where can I find this file but up to date for Oracle 9i or 10g ?
Thanks

Hi,
In addition, you can take a look on books link and search for "Error Messages"
http://www.oracle.com/pls/db102/portal.portal_db?selected=3
Cheers

Getting mandatory attribute validation error when the value is defaulted through customization

Hi
I am getting Mandatory attribute validation error when we default the value through customization.
In the UI we have attribute called Last Name which is mandatory at EO level. Customer wanted to default Last name to some value, through page composer it is defaulted to some text and saved.
When ever we open the page the the same value is defaulted as Last Name and appearing in the UI. But when we submit the page, EO level validation is failing. hence we are getting last name is missing.
When i debug the code last name attribute value for EO is blank.
In the UI the attribute last name is associated with bindings --> #{bindings.lastname.inputvalue}
The validation is failing if we remove the default binding associated with inputtext box.
Can some body help what can be reason and is there any solution?
Thanks,
Praveen

version 12.1.2
I am struggling with same situation, I can't set the default value at business component because, the default value comes from a REST service at run time. In page A, I have a field F1 that contains value from REST service. Page B has a database bound field F2, whose default value should come from F1 in Page A when a user navigates from Page A to Page B. If I set the value of F2 to be the value of F1, then it displays the value in the UI, but nothing gets submitted to EO and fails at commit.
To make things difficult, here is my situation: Page A lives in bounded taskflow TF1, and Page B lives in bounded taskflow TF2. So I have created an input parameter P1 in TF 2, which carries over the value of F1 in Page A to Page B. When I am in Page B, I can successfully see the value of the taskflow input parameter P1. So, how do I programmatically set the value of field F2 with the value of input parameter P1?
I tried setting the F2.inputValue in a method call M1 in taskflow TF2 prior to Page B, but I get null pointer exception as it can't see field F2 yet.
It seems like a simple thing to do, but I have spent a lot of time trying to make it work without any success.
I would greatly appreciate any guidance.

Itunes 9.2.1.5 "Error when writing file C:\program files\apple software....

Got an error message when installing itues 9.2.1.5 "Error when writing file C:\program files\apple software update\softwareupdate.exe you do not have admin right to read/write the menu." "寫入檔案時發生錯誤 C:\program files\apple software update\softwareupdate.exe 你沒有權限存取目錄"
There is no "apple software update" folder in my C:\program files\
I tried to uninstalled all apple related software, restart the computer and reinstall the itunes, I still get this error message.
It appears that the installation of quicktime was successful.

After the last update I get "QuickTime was not found" Error I have uninstalled and re-installed itunes 9.2.1.5. several times but the problem persists

Error when uploading file : Return code = 6 in LSMW

Hello All,
Getting the bleow mentioned error in LSMW.
Error when uploading file Return code = 6 )
Is it related to access. please suggest.

did you define the file in step 7 without any error and allocate in step 8 without any error before?
I mean in the same system where you execute the read step.
Make sure you have the file not open when you execute the read step.

I'm trying to download Premier pro and I'm getting an error message saying "Error when extracting files"

I'm trying to download Premier pro and I'm getting an error message saying "Error when extracting files". I use a PC and have made the purchase of that service. What's the problem?

Hi ampsanru,
We would need some information regarding the error, could you please post a screenshot moreover your system information i.e. OS, RAM & Graphics card.
-Ankit

[svn] 1774: Bug: BLZ-176 - Not getting an authentication error when Producer tries to send a message over streaming channel with insufficient credentials .

Revision: 1774
Author: [email protected]
Date: 2008-05-16 13:29:10 -0700 (Fri, 16 May 2008)
Log Message:
Bug: BLZ-176 - Not getting an authentication error when Producer tries to send a message over streaming channel with insufficient credentials.
QA: Yes
Doc: No
Checkintests: Pass
Details: This was caused by the fact that streaming channels do not report connected until the initial ping completes and a URLStream is established with the server. Added some extra code in ChannelSet to make sure authentication errors are reported with correct faultCode even if the channel is not reporting connected.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-176
Modified Paths:
flex/sdk/branches/3.0.1.x/frameworks/projects/rpc/src/mx/messaging/ChannelSet.as

Revision: 1774
Author: [email protected]
Date: 2008-05-16 13:29:10 -0700 (Fri, 16 May 2008)
Log Message:
Bug: BLZ-176 - Not getting an authentication error when Producer tries to send a message over streaming channel with insufficient credentials.
QA: Yes
Doc: No
Checkintests: Pass
Details: This was caused by the fact that streaming channels do not report connected until the initial ping completes and a URLStream is established with the server. Added some extra code in ChannelSet to make sure authentication errors are reported with correct faultCode even if the channel is not reporting connected.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-176
Modified Paths:
flex/sdk/branches/3.0.1.x/frameworks/projects/rpc/src/mx/messaging/ChannelSet.as

Error when uploading file :( Return code = 6 )

Hello All,
Getting the bleow mentioned error in LSMW.
Error when uploading file Return code = 6 )
Is it related to access. please suggest.

Hi,
If the Sy-Subrc is 0 then Success,
Sy-SUBRC is 4 then failure,
Sy-SUBRC = 6 then the user might be not access to read the file.
This is due to authorization issue.

Compress Smartform PDF file before sending mail

Hi Experts,
I need to compress PO smartform.Smartform already converted into PDF file.Vendor received this file as an attachement in their mail box.Vendor complains that file size is too large.They want to compress that PDF file before sending mail.
Anybody can suggest how to compress a smartform which is already converted into PDF.

Hi Michael/Satyajit,
First of all thanks for the suggestions.
Actually I am working for a application maintenance project and after go-live user is complaining that previously the PO form size was 57 KB and after this implementation the form size is 618KB that is not acceptable.
I checked with the legacy system and found that the previous form was developed using SAPScript,converted to PDF and then used to send as an attachement to user mail box.
The new development environment using Smartform for PO form and then it is converted to PDF and send as an attachement to user mail box.I checked with the Logo and the logo size is only of 9KB.No other graphics used in the form.The developer had used 3-4 boxes in the form and page format is landscape. Style is used in the form and the used font is courier,font size is 10 pt .
Will change in style's font and font size reduces the size upto that level??

Error when PDF File is send through SAP to Vendors.

Similar Messages

Maybe you are looking for