Error when running DBMS_STATS package

Hi all.
Oracle9i Enterprise Edition Release 9.2.0.4.0 - 64bit Production
PL/SQL Release 9.2.0.4.0 - Production
CORE 9.2.0.3.0 Production
TNS for Solaris: Version 9.2.0.4.0 - Production
NLSRTL Version 9.2.0.4.0 - Production
I am trying to gather schema stats using dbms_stats package and I see the following:
SQL> BEGIN DBMS_STATS.gather_schema_stats('SYSADM');
2 END;
3 /
ERROR at line 1:
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04040: file G534513-1004.txt in EXT_WINDIR not found
ORA-06512: at "SYS.DBMS_STATS", line 9375
ORA-06512: at "SYS.DBMS_STATS", line 9857
ORA-06512: at "SYS.DBMS_STATS", line 10041
ORA-06512: at "SYS.DBMS_STATS", line 10095
ORA-06512: at "SYS.DBMS_STATS", line 10072
ORA-06512: at line 1
The directory exists but the file is long gone. How can I get around this error?
Thanks

See if this helps,
ERROR WITH EXTERNAL TABLE
HTH
Aman....

Similar Messages

Error when running MakeDim package

Hi there,
I have a really annoying problem with the Admin_MakeDim package in the Examples folder of BPC.
We have a Data Services process which is populating a staging table which is an exact duplicate of the mbrAccount table. When I run the makedim package to create my dimension from this staging table I don't get any member errors (I did but I fixed them), but I still get this message:
"Operation is not allowed when the object is closed. : Location (bCheckMemberIsInsertedMidel)
Location (adoCheckUniqueID)"
I've searched on the forum, and in the SAP notes, and I came across these SAP notes, which seemed to be relevant:
1101613
1099136
1101529
1099135
1107441
1102829
However, none of these solutions has helped.
Has anyone else found and fixed this problem? We are on BPC for MS 7 sp7, on SQL Server 2005.
Thanks very much in advance,
Jason

Hi Jason,
have you seen also these notes
http://service.sap.com/sap/support/notes/1704468
http://service.sap.com/sap/support/notes/1447125
you wrote note 1099136, you mean 1099135, correct?
check also the message in google you will found a lot of messages and maybe one could be useful.
Kind regards
Roberto

Poor performance when running DBMS_STATS package

Hello,
I thought I would throw this issue out to the general population as I am stumped.
I have two identical schemas on two different severs. Database in 9.2.0.6 and for QAS and Production reasons the servers and database settings are identical.
I am running the DBMS_STATS.GATHER_SCHEMA_STATS package on both databases. On the QAS DB it takes roughly 1.5 hours while on the Production database it takes 8.0 hours.
Looking at the statspack analysis, the biggest thing to jump out at me is that the temporary tablespace is getting 4.6 Million I/O hits (reads) while the QAS is only getting a few thousand.
So .... this sort of indicates that something is going on in the PGA which could cause Oracle to use the TEMP tablespace. However when I look in the host performance (using Grid Control) the servers memory, file I/O, and CPU while high are not over 80%.
Has anyone else seen and issue like this? Any ideas where to look?
Thanks,
Chris

To the extent that you are gathering histograms on the data, Oracle potentially has to do a reasonable amount of sorting. If one machine has substantially more physical RAM, that presumably implies that it has more RAM available for the PGA, which would allow more sorts to happen in memory rather than on disk.
Depending on how you create a "refresh copy of production" and what parameters you are passing in to DBMS_STATS, it is also possible that the quality assurance database is gathering substantially more histograms than the production database (i.e. you refresh lower environments via export and import rather than doing an RMAN clone and tell Oracle to gather histograms on any columns that currently have histograms).
Justin

Error when running dbms_stats.gather_database_stats from dbms_job?

I had an issue with the default oracle job to analyze the database. I opened a metalink ticket and they said there is a known bug in 10.1.0.3 with the default oracle job and it does not work.
I am not allowed allowed to update. so the work around was to run this from dba_jobs.
I have this job created as system and run it manually...
dbms_stats.gather_database_stats(cascade => TRUE,method_opt => 'FOR ALL COLUMNS SIZE AUTO',
degree=>8 )
I can execute this when logged in as system.
When I try to execute the job I get:
ORA-12012: error on auto execute of job 26ORA-20000: Insufficient privileges to analyze an object in DatabaseORA-06512: at "SYS.DBMS_STATS", line 12086ORA-06512: at "SYS.DBMS_STATS", line 12425ORA-06512: at "SYS.DBMS_STATS", line 12567ORA-06512: at "SYS.DBMS_STATS", line 12531ORA-06512: at line 1This is running as system?
The table I don't have access to is located in someones schema.
log_user,priv_user, and schema_user are all system...
Why can I run this manually and not through a job?
Edited by: Guess2 on Jul 21, 2009 9:15 AM
Edited by: Guess2 on Jul 21, 2009 9:16 AM

The table I get an error on is not partitioned.
I also do not get a exception when I run that procedure manually as system, but when I run it from dba_jobs, I get an insufficient privileges issue.

Why am I getting Installation Failed error when running Install package?

Enterprise license holder here. Mac. I've installed ccplauncher, run it, and am now trying to run the Install.pkg. I'm getting an error:
Already tried running disc permissions, still nothing. Erased all old versions of CS (5, 5.5, 6) from my HD using AppCleaner so no resources or plists left behind before installing CC.

Jeff,
You may want to use /Utilities/Console and look at /Library/Logs/Adobe/Installers to see where the failure is actually occurring. Even though it's one install package, it's installing each application in sequence. If only one fails (and all the others succeed) you'll still see the message you received. There can be a lot in the logs, but you can use the Spotlight field to filter out the lines with "return code." Anything other than "0" (zero) indicates something that didn't complete. You can also look for words like "error" or "fail".
There are a bunch of things that can cause an error. I've sometimes had a problem with packages that include a lot of updates but rebuilding them seemed to fix it. Finding out exactly where the error is happening is a big help when you contact support.
I realize this isn't a solution, but hope it helps.
Ric

Error connecting to Oracle from when running SSIS Package on Windows 64-bit

Hi.
I have an SSIS (SQL Server Integration Services) Package that reads a view on Oracle and loads data into table in SQL Server 2005. This is on a Windows 2008 Server (64-bit). SQL Server 2005 with SP3. Oracle Client 11g (32 bit & 64 bit) Runtime Version installed on server. The server has been rebooted since installing OracleClient.
I get the following error when run as a SQLAgent job 64 Bit (Execution type SQL Server Integration Services Package)...
Started: 9:29:24 AM
Error: 2010-01-04 09:29:25.37
Code: 0xC0202009
Source: SADM_CURR_Address_and_Cell_Phone-Oracle Connection manager "Oracle/PeopleSoft"
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040154.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered".
End Error
Error: 2010-01-04 09:29:25.37
Code: 0xC020801C
Source: DFT-Oracle to SS2005 OLE DB Source [1]
Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Oracle/PeopleSoft" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
End Error
Error: 2010-01-04 09:29:25.37
Code: 0xC0047017
Source: DFT-Oracle to SS2005 DTS.Pipeline
Description: component "OLE DB Source" (1) failed validation and returned error code 0xC020801C.
End Error
Error: 2010-01-04 09:29:25.37
Code: 0xC004700C
Source: DFT-Oracle to SS2005 DTS.Pipeline
Description: One or more component failed validation.
End Error
Error: 2010-01-04 09:29:25.37
Code: 0xC0024107
Source: DFT-Oracle to SS2005
Description: There were errors during task validation.
End Error
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 9:29:24 AM
Finished: 9:29:25 AM
Elapsed: 1.108 seconds
When I execute this same exact package as a SQLAgent job 32-bit (type Operating System CmdExec) it runs successfully. When I run the package using the Execute Package Utility, it runs successfully. When I am editting the package in BIDS I can connect to Oracle. For both 64 and 32 bit, I use a dtsconfig file which specifies the Oracle connection string and password.
Someone mentioned on another forum that maybe there is no Oracle ODBC driver for 64-bit Windows. I would assume that the OracleClient 64-bit would include that.
I hope I have included all info needed. Please let me know if you may have a resolution to this problem.
Thanks.
John

I was trying to transfer data from oracle to sql server 2008 on a daily basis.
I have very hard time connecting to oracle from ssis package on windows server 2008. I am almost dead and cannot find any help. i was able to connect to oracle using import/export 64 bit feature of SQL Server 2008 using Oracle provider for OLEDB. But I am not sure why the same does not work with BIDS?
Here's the environment info:
1. Oracle Client 10g
2. SQL Server 2008
3. Windows Server 2008
Appreciate your help. Please save me.
Thanks,

ADT packaging with native extensions : permission denied error when running remote build.

Hi Team,
We are facing the following error when running the nightly ant build script on Mac machine for our air mobile application. We are using iOS native extensions and package with ADT. This works fine when we run the build as local user in the Mac machine. Earlier we faced some issues due to headless build and we have added the <headless-server>true</headless-server> in corresponding config files (flex-config.xml, airmobile-config.xml). After that we are facing the following error, even when we run the ant build in headless mode using the following command.
ant -Djava.awt.headless=true -f build.xml buildPackage
When running this build as local user in the Mac build machine, we see a window opening with com.adobe.air.ADT while packaging. This is the issue when running nightly build as there is no graphics window.
Can anybody please help how to get rid of this issue for nightly build using adt,jar?
Here is the error from build log:
buildiOSPackageWithNativeExtensionMac:
     [echo] Export the iOS package with Native extension for ApprovalsMobile in Mac
     [java] Exception in thread "main" java.lang.InternalError: Can't connect to window server - not enough permissions.
     [java] at java.lang.ClassLoader$NativeLibrary.load(Native Method)
     [java] at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1827)
     [java] at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1724)
     [java] at java.lang.Runtime.loadLibrary0(Runtime.java:823)
     [java] at java.lang.System.loadLibrary(System.java:1045)
     [java] at sun.security.action.LoadLibraryAction.run(LoadLibraryAction.java:50)
     [java] at java.security.AccessController.doPrivileged(Native Method)
     [java] at java.awt.Toolkit.loadLibraries(Toolkit.java:1605)
     [java] at java.awt.Toolkit.<clinit>(Toolkit.java:1627)
     [java] at java.awt.Dimension.<clinit>(Dimension.java:70)
     [java] at com.adobe.air.validator.ApplicationDescriptorValidator.validateImageUri(ApplicationDescri ptorValidator.java:183)
     [java] at com.adobe.air.validator.ApplicationDescriptorValidator20.validateElement(ApplicationDescr iptorValidator20.java:121)
     [java] at com.adobe.air.validator.ApplicationDescriptorValidator25.validateElement(ApplicationDescr iptorValidator25.java:65)
     [java] at com.adobe.air.validator.ApplicationDescriptorValidator26.validateElement(ApplicationDescr iptorValidator26.java:62)
     [java] at com.adobe.air.validator.ApplicationDescriptorValidator30.validateElement(ApplicationDescr iptorValidator30.java:52)
     [java] at com.adobe.air.validator.ApplicationDescriptorValidator31.validateElement(ApplicationDescr iptorValidator31.java:46)
     [java] at com.adobe.air.validator.DescriptorValidator.endElement(DescriptorValidator.java:239)
     [java] at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.endElement(AbstractSAXParser .java:601)
     [java] at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanEndElement(XML DocumentFragmentScannerImpl.java:1782)
     [java] at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$FragmentContentDri ver.next(XMLDocumentFragmentScannerImpl.java:2939)
     [java] at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(XMLDocumentScannerImp l.java:648)
     [java] at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.next(XMLNSDocumentScanne rImpl.java:140)
     [java] at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(XMLDo cumentFragmentScannerImpl.java:511)
     [java] at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.ja va:808)
     [java] at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.ja va:737)
     [java] at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(XMLParser.java:119)
     [java] at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.parse(AbstractSAXParser.java :1205)
     [java] at com.sun.org.apache.xerces.internal.jaxp.SAXParserImpl$JAXPSAXParser.parse(SAXParserImpl.j ava:522)
     [java] at javax.xml.parsers.SAXParser.parse(SAXParser.java:395)
     [java] at javax.xml.parsers.SAXParser.parse(SAXParser.java:198)
     [java] at com.adobe.air.Descriptor.validateXML(Descriptor.java:182)
     [java] at com.adobe.air.Descriptor.<init>(Descriptor.java:56)
     [java] at com.adobe.air.ApplicationDescriptor.<init>(ApplicationDescriptor.java:84)
     [java] at com.adobe.air.ApplicationPackager.validateApplicationDescriptor(ApplicationPackager.java: 101)
     [java] at com.adobe.air.ApplicationPackager.createPackage(ApplicationPackager.java:64)
     [java] at com.adobe.air.ipa.IPAPackager.createPackage(IPAPackager.java:217)
     [java] at com.adobe.air.ADT.parseArgsAndGo(ADT.java:557)
     [java] at com.adobe.air.ADT.run(ADT.java:414)
     [java] at com.adobe.air.ADT.main(ADT.java:464)
Thanks,
Swathi.

Note: Before the above error that were two other errors .
1) The build complained that the adt-bundle-linux toolchain could not be found and required that it be added to .mozconfig. This was done.
2) The build complained that dx could not be found.
The configure file was edited and the values $DX, $AAPT and $AIDL were all set to the adt-bundle-linux/sdk/build-tools/android-4.4 path.
The instructions given on the Mozilla Wiki did not work right for Android and several modifications were made to move it along. But this permission error is tough to figure out.

Error while running SSIS package from Integration service or via Job

Hi All,
I encounter the below error while running SSIS Package from Job or integration service. However on execution completes success fully while running from data tools. The issue occurs after migration to 2012 from 2oo5 dtsx. PFB the error.
SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on OLE DB Source returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by
the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
A buffer failed while allocating 10485760 bytes.
The system reports 26 percent memory load. There are 206110765056 bytes of physical memory with 150503776256 bytes.
free. There are 2147352576 bytes of virtual memory with 185106432 bytes free. The paging file has 208256339968 bytes with 145642921984 bytes free.
The package also runs successfully from other servers. This happens only in one of our server.seems like issue with some sql configuration.

Hi ,
Are you running using SQL Agent Job and Data tools on same server or different?
If it is executing fine using Data tools and failing with Job it might be User credentials issue.Try
to run Job with your credentials by using proxy .
Regards,
Prathy
Prathy K

ORA-06502 - Error when running "Ask The Expert 0.9"

Hi ,
I successfully installed "Ask the Expert" package with Apex 3.0 on Oracle 10g Database 10.2.0.1.0. No error ocurred during the import in my Apex environment.
Besides that, i'm having problems when i tried to run the "Aks the Expert". It always shows the following message errors:
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
Error Unable to write activity log.
I think it was a problem with APEX instalation, but i could run the Sample Application of Apex without any problem.
I opened an SR in Metalink, but to my surprise, the analist of support don't know what's wrong with the demo "Ask de Expert".
The debug function of the application show the following commands before the error ocurrs:
0.01:
0.01: S H O W: application="103" page="1" workspace="" request="" session="6648566035252817"
0.01: Language derived from: FLOW_PRIMARY_LANGUAGE, current browser language: en-us
0.01: alter session set nls_language="AMERICAN"
0.01: alter session set nls_territory="AMERICA"
0.01: NLS: CSV charset=WE8MSWIN1252
0.01: ...NLS: Set Decimal separator="."
0.01: ...NLS: Set NLS Group separator=","
0.02: ...NLS: Set date format="DD-MON-RR"
0.02: ...Setting session time_zone to -03:00
0.02: NLS: Language=en-us
0.02: Application 103, Authentication: CUSTOM2, Page Template: 667896385843019243
0.02: ...Determine if user "N3COUTINHO" workspace "951808960237899" can develop application "103" in workspace "951808960237899"
0.02: ...ok to reuse builder session for user:nobody
0.03: ...Application session: 6648566035252817, user=nobody
0.03: ...Determine if user "N3COUTINHO" workspace "951808960237899" can develop application "103" in workspace "951808960237899"
0.03: Session: Fetch session header information
0.03: ...Metadata: Fetch page attributes for application 103, page 1
0.03: Fetch session state from database
0.03: Branch point: BEFORE_HEADER
0.03: Fetch application meta data
0.04: Computation point: BEFORE_HEADER
0.04: ...Perform computation of item: P1_CLEAN_CRITERIA, type=FUNCTION_BODY
0.04: ...Performing function body computation
0.06: ...Session State: Save "P1_CLEAN_CRITERIA" - saving same value: ""
0.06: Processing point: BEFORE_HEADER
0.06: ...Process "Read and Write Activity Cookie": PLSQL (BEFORE_HEADER) declare l_cookie_id number; begin owa_util.mime_header('text/html', FALSE); -- ate_api.read_activity_cookie; l_cookie_id := ate_api.fetch_activity_cookie_val( 'COOKIE_ID' ); -- if l_cookie_id is null then l_cookie_id :=
Content-type: text/html; charset=ISO-8859-1 Set-Cookie: activity_ask_expert=1|2400346189796; expires=Wed, 01-Jan-2020 08:00:00 GMT; path=/;
0.06: Encountered unhandled exception in process type PLSQL
0.06: Show ERROR page...
0.06: Performing rollback...
Please, could any one help me to solve this problem ? Metalink couldn't help me diagnosing what's wrong.
Thanks,
Sergio Coutinho

Hi,
I don´t know if it help the analisis, but i collect some informations about my environment:
1) HTML DB version
3.0.1
2) Database version
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
3) Database server operating system (as well, if 32-bit or 64-bit)
Solaris 5.9 - 64 bits
4) Database Parameters:
PARAMETER VALUE
NLS_CALENDAR GREGORIAN
NLS_CHARACTERSET WE8ISO8859P1
NLS_COMP BINARY
NLS_CURRENCY $
NLS_DATE_FORMAT DD-MON-RR
NLS_DATE_LANGUAGE AMERICAN
NLS_DUAL_CURRENCY $
NLS_ISO_CURRENCY AMERICA
NLS_LANGUAGE AMERICAN
NLS_LENGTH_SEMANTICS BYTE
NLS_NCHAR_CHARACTERSET AL16UTF16
NLS_NCHAR_CONV_EXCP FALSE
NLS_NUMERIC_CHARACTERS .,
NLS_RDBMS_VERSION 10.2.0.1.0
NLS_SORT BINARY
NLS_TERRITORY AMERICA
NLS_TIMESTAMP_FORMAT DD-MON-RR HH.MI.SSXFF AM
NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI.SSXFF AM TZR
NLS_TIME_FORMAT HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT HH.MI.SSXFF AM TZR
Could it explain why ASK THE EXPERT is running on hosted apex site and it´s
generating error when running in my environment?
Thanks for the help !
Sergio

Getting the below error when running the Baseline.grf for the first time

I am getting the below error when running the Baseline.grf for the first time.
Appreciate your support in resolving it.
Error below:
INFO [main] - *** CloverETL framework/transformation graph, (c) 2002-2012 Javlin a.s, released under GNU Lesser General Public License ***
INFO [main] - Running with CloverETL library version 3.2.1 build#63 compiled 04/01/2012 12:53:21
INFO [main] - Running on 4 CPU(s), OS Windows 7, architecture amd64, Java version 1.6.0_20, max available memory for JVM 901120 KB
INFO [main] - Loading default properties from: defaultProperties
INFO [main] - Graph definition file: graph/Baseline.grf
INFO [main] - Graph revision: 1.114 Modified by: mkressirer Modified: Thu Apr 12 13:27:18 EDT 2012
INFO [main] - Checking graph configuration...
INFO [main] - Graph configuration is valid.
INFO [main] - Graph initialization (Baseline)
INFO [main] - [Clover] Initializing phase: 0
INFO [main] - [Clover] phase: 0 initialized successfully.
INFO [main] - register MBean with name:org.jetel.graph.runtime:type=CLOVERJMX_1306871483270_0
INFO [WatchDog] - Starting up all nodes in phase [0]
INFO [WatchDog] - Successfully started all nodes in phase!
INFO [RUN_GRAPH1_0] - Running graph ./graph/InitDataStore.grf in the same instance.
INFO [RUN_GRAPH1_0] - Checking graph configuration...
INFO [RUN_GRAPH1_0] - Graph configuration is valid.
INFO [RUN_GRAPH1_0] - Graph initialization (InitDataStore)
INFO [RUN_GRAPH1_0] - [Clover] Initializing phase: 0
WARN [RUN_GRAPH1_0] - WS messenger cleanup failed.
java.lang.NullPointerException
     at org.apache.axis2.client.Stub.cleanup(Stub.java:134)
     at com.opensys.cloveretl.component.WebServiceClient.free(Unknown Source)
     at org.jetel.graph.Phase.free(Phase.java:487)
     at org.jetel.graph.TransformationGraph.freeResources(TransformationGraph.java:681)
     at org.jetel.graph.TransformationGraph.free(TransformationGraph.java:955)
     at org.jetel.graph.runtime.PrimitiveAuthorityProxy.executeGraph(PrimitiveAuthorityProxy.java:149)
     at org.jetel.component.RunGraph.runGraphThisInstance(RunGraph.java:511)
     at org.jetel.component.RunGraph.runSingleGraph(RunGraph.java:409)
     at org.jetel.component.RunGraph.execute(RunGraph.java:302)
     at org.jetel.graph.Node.run(Node.java:414)
     at java.lang.Thread.run(Thread.java:619)
WARN [RUN_GRAPH1_0] - Some graphs wasn't executed (because graph "./graph/InitDataStore.grf" finished with error).
WARN [RUN_GRAPH1_0] - Some graph(s) finished with error.
ERROR [WatchDog] - Graph execution finished with error
ERROR [WatchDog] - Node RUN_GRAPH1 finished with status: ERROR caused by: Graph './graph/InitDataStore.grf' failed!
ERROR [WatchDog] - Node RUN_GRAPH1 error details:
org.jetel.exception.JetelException: Graph './graph/InitDataStore.grf' failed!
     at org.jetel.component.RunGraph.execute(RunGraph.java:324)
     at org.jetel.graph.Node.run(Node.java:414)
     at java.lang.Thread.run(Thread.java:619)
INFO [WatchDog] - [Clover] Post-execute phase finalization: 0
INFO [WatchDog] - [Clover] phase: 0 post-execute finalization successfully.
INFO [WatchDog] - Execution of phase [0] finished with error - elapsed time(sec): 2
ERROR [WatchDog] - !!! Phase finished with error - stopping graph run !!!
INFO [WatchDog] - -----------------------** Summary of Phases execution **---------------------
INFO [WatchDog] - Phase# Finished Status RunTime(sec) MemoryAllocation(KB)
INFO [WatchDog] - 0 ERROR 2 20132
INFO [WatchDog] - ------------------------------** End of Summary **---------------------------
WARN [exNode_0_1306871483270_RUN_GRAPH1] - Attempt to unregister non-registered thread in the ContextProvider.
./graph/InitDataStore.grf: Execution of graph failed! Error during graph initialization: Phase 0 can't be initilized.
INFO [WatchDog] - WatchDog thread finished - total execution time: 2 (sec)
INFO [main] - Freeing graph resources.
ERROR [main] - Execution of graph failed !

It can't find an Endeca specific class when running via the clover command line utility. Thus, the classpath being set in that shell script is not incorporating the .jar files where the endeca-specific classes are packaged. I would start by adding an line to see what your classpath is set to. There are actually already some lines of shell script in clover that you can uncomment to see what .jars are getting loaded:
#echo $CLOVER_LIB/*
for i in $CLOVER_LIB/*.jar $CLOVER_LIB/*.zip; do
     LOCAL_CLASSPATH="$LOCAL_CLASSPATH:$i"
done;
#for i in `ls $CLOVER_LIB/*.jar`; do
#echo $i
#done;
You could also echo LOCAL_CLASSPATH to see what is getting set there. At the end of the day, you will need the endeca-specific jars to load which can be found here: /Endeca/Discovery/2.3.0/Integrator/plugins/com.endeca.latitude_1.0.0/*
HTH,
Dan
http://branchbird.com

ORA-04062 error when running forms with different users

ORA-04062 error when running forms with different users
I have a form that has a block that should display some data from another users tables. (The other user's name is dynamic, it's selected from a list box)
I wrote a stored procedure to get the data from other user's tables.
When I compile the form and run it with the same user I compiled, it works without any error. But when I run the compiled form with another user I get the ORA-04062 (signature of procedure has been changed) error.
I tried setting REMOTE_DEPENDENCIES_MODE to SIGNATURE in init.ora but it didn't help.
My Forms version is 6i with Patch 15.
Database version is 9.
Here is my stored procedure:
TYPE Scenario_Tab IS TABLE OF NUMBER(34) INDEX BY BINARY INTEGER;
TYPE Open_Curs IS REF CURSOR;
PROCEDURE Get_Scenarios(User_Name IN VARCHAR2, Scen_Table OUT Scenario_Tab) IS
Curs Open_Curs;
i NUMBER;
BEGIN
OPEN Curs FOR
'SELECT Seq_No FROM '|| User_Name ||'.scenario';
i := 1;
LOOP
FETCH Curs INTO Scen_Table(i);
EXIT WHEN Curs%NOTFOUND;
i := i + 1;
END LOOP;
END Get_Senarios;
I would be happy to solve this problem. It's really important.
Maybe somebody can tell me another way to do what I want to do. (getting a list of values from another users tables)

I think it should be a better solution to create a package,
and put your own TYPES and procedure into it.
CREATE OR REPLACE PACKAGE PKG_XXX IS
TYPE TYP_TAB_CHAR IS TABLE OF .... ;
PROCEDURE P_XX ( Var1 IN VARCHAR2, var2 IN OUT TYP_TAB_CHAR );
END ;
Then in your Form :
Declare
var PKG_XXX.TYP_TAB_CHAR ;
Begin
PKG_XXX.P_XX( 'user_name', var ) ;
End ;

Error when running allocation logic

I am running the following allocation logic and get the following error:
*RUNALLOCATION
*FACTOR=USING/TOTAL
*DIM P_ACCT WHAT=CE0004010; WHERE=CE0004020; USING=CE0004030; TOTAL=<<<
*DIM ENTITY WHAT=A1000; WHERE=<<<; USING=<<<; TOTAL=<<<
*DIM TIME WHAT=2009.JAN; WHERE=>>>; USING=BAS(2009.TOTAL); TOTAL=<<<
*ENDALLOCATION
UJP_RULE_EXCEPTION:Missing [] on property name: WHAT=CE0004010. I get this error when executing the script using the program "UJK_SCRIPT_LOGIC_TESTER". I also get a similar error when running it via the data manager package.
Any thoughts on why this error is happening?

Hi Sanjay,
I think you are using formula property for any of the dimension member used in the Allocation logic.
FYI Allocation will not work fine for the dimension members which is calculated using the formula written in the formula Property.
There is no problem with your script it looks fine.
Hope this might help you.
Regards,
G.Vijaya Kumar

SAML v2 plugin: Error when running saml2setup

I try to install the SAML v2 plugin and get the following error when running the saml2setup command:
C:\SSO\samlv2-2007Q2-windows>saml2setup install -s saml2silent
Java home path = C:\PROGRA~1\Java\JDK15~1.0_1
Configuring SAML2 plugin ...
java.lang.Exception: errorCopyFiles
        at com.sun.identity.saml2.install.SAML2Util.copyFile(SAML2Util.java:195)
        at com.sun.identity.saml2.install.SAML2Util.backupFiles(SAML2Util.java:5
17)
        at com.sun.identity.saml2.install.SAML2Util.configureSAML2(SAML2Util.jav
a:342)
        at com.sun.identity.saml2.install.SAML2Setup.configure(SAML2Setup.java:2
06)
        at com.sun.identity.saml2.install.SAML2Setup.execute(SAML2Setup.java:123
        at com.sun.identity.saml2.install.SAML2Setup.main(SAML2Setup.java:71)I have installed the Java ES 5 Identity suite with default configuration on Windows 2003. The content of the amserver.war lies extracted in the staging directory. The saml2silent properties file looks like this:
STAGING_DIR=C:/SSO/fm/war_staging
ADMINPASSWD=XXXX
DEPLOY_SAMPLES=true
SYSTEM=
AM_INSTANCE=
AM_CONFIGURATION_DIR=C:/PROGRA~1/Sun/JavaES5/identity/config
AMADMIN_DIR=C:/PROGRA~1/Sun/JavaES5/identity/bin
LOAD_SCHEMA=true
DS_DIRMGRDN="cn=Directory Manager"
DS_DIRMGRPASSWD=XXXXDoes anybody have an idea what's wrong?

Unfortunately not. I figured out that the problem was caused by some missing libraries. The amserver.war of the package installation is not identical to the amserver.war archive of the the single war deployment, since the package deployment uses a shared folder for some of the libraries. After copying the libraries into the staging folder I ran into other issues. Therefore I decided to install Access Manager using the single war depolyment. I could then install the SAML v2 plugin without any problems.

"Missing Class" error when running web service

Hi,
I am getting an "Missing Class" error when running a web service. The web service was generated from a Java class via the "create J2EE web service" option.
The web service has a JAX-RPC handler class added, which belongs to the same package as a logging class. The logging class is used to write to a file for debug purposes. A "missing class" error is being generated whenever I attempt to invoke the web service (via the enterprise manager test util), the error refers to the logging class which is used by the main handler class. The JAX-RPC handler works fine by itself, the error is only seen when I attempt to use the logging class.
I have re-built, re-deployed from scratch again, but still get the same error! Am I missing something simple here?
thanks for any advice

Cant you paste some of your code, formatted in code tags? It looks like there is a problem passing some of the XMl response, it doesnt like a tag html.
If you post some code somebody might actually be able to help you.

Critical error when running BEX

Hi,
My students are getting a critical error when running BEX analyser (excel shuts down). I understand there is a patch for BEX .... where can I find it?
Thanks, Ed

Dear Ed,
The reason for the Critical Error could be the usage of older Patch.
The Latest BEx Client can be found in the SMP at following location :
service.sap.com/swdc
->SAP Software Distribution Center
->Download
->Support Packages and Patches
   ->Entry by Application Group
   ->SAP Frontend Components
    ->BI ADDON FOR SAP GUI
     ->BI 7.0 ADDON FOR SAP GUI 7.10
Hope this helps you.
Rgds,
Mura

Error when running DBMS_STATS package

Similar Messages

Maybe you are looking for