Error connecting to Oracle from when running SSIS Package on Windows 64-bit

Hi.
I have an SSIS (SQL Server Integration Services) Package that reads a view on Oracle and loads data into table in SQL Server 2005. This is on a Windows 2008 Server (64-bit). SQL Server 2005 with SP3. Oracle Client 11g (32 bit & 64 bit) Runtime Version installed on server. The server has been rebooted since installing OracleClient.
I get the following error when run as a SQLAgent job 64 Bit (Execution type SQL Server Integration Services Package)...
Started: 9:29:24 AM
Error: 2010-01-04 09:29:25.37
Code: 0xC0202009
Source: SADM_CURR_Address_and_Cell_Phone-Oracle Connection manager "Oracle/PeopleSoft"
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040154.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered".
End Error
Error: 2010-01-04 09:29:25.37
Code: 0xC020801C
Source: DFT-Oracle to SS2005 OLE DB Source [1]
Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Oracle/PeopleSoft" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
End Error
Error: 2010-01-04 09:29:25.37
Code: 0xC0047017
Source: DFT-Oracle to SS2005 DTS.Pipeline
Description: component "OLE DB Source" (1) failed validation and returned error code 0xC020801C.
End Error
Error: 2010-01-04 09:29:25.37
Code: 0xC004700C
Source: DFT-Oracle to SS2005 DTS.Pipeline
Description: One or more component failed validation.
End Error
Error: 2010-01-04 09:29:25.37
Code: 0xC0024107
Source: DFT-Oracle to SS2005
Description: There were errors during task validation.
End Error
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 9:29:24 AM
Finished: 9:29:25 AM
Elapsed: 1.108 seconds
When I execute this same exact package as a SQLAgent job 32-bit (type Operating System CmdExec) it runs successfully. When I run the package using the Execute Package Utility, it runs successfully. When I am editting the package in BIDS I can connect to Oracle. For both 64 and 32 bit, I use a dtsconfig file which specifies the Oracle connection string and password.
Someone mentioned on another forum that maybe there is no Oracle ODBC driver for 64-bit Windows. I would assume that the OracleClient 64-bit would include that.
I hope I have included all info needed. Please let me know if you may have a resolution to this problem.
Thanks.
John

I was trying to transfer data from oracle to sql server 2008 on a daily basis.
I have very hard time connecting to oracle from ssis package on windows server 2008. I am almost dead and cannot find any help. i was able to connect to oracle using import/export 64 bit feature of SQL Server 2008 using Oracle provider for OLEDB. But I am not sure why the same does not work with BIDS?
Here's the environment info:
1. Oracle Client 10g
2. SQL Server 2008
3. Windows Server 2008
Appreciate your help. Please save me.
Thanks,

Similar Messages

Error connecting to Essbase Server when running business rules

We recently migrated from v9.3 to v11.1.1.3. I have two users with Administrative access who need to run business rules on a native Essbase application, but cannot. They get the message 'Error connecting to Essbase Server'. They get this message when trying to set this execution database. They can't even expand the server to see the list of applications. I have tried deprovisioning them in Shared Services, refreshing security, then adding it all back in and refreshing again, but it doesn't work. My own id has identical access to that which I'm granting them, and I have no problems. I even created a native user with the same access and it works as well. No matter what I do, I cannot get these two users to be able to run their business rules in EAS.
We also have a Planning application, and the Planning Administrative user has the same issue. However, this user is able to get around it by running rules using the Planning connection rather than the Essbase connection. She has the same issue of not seeing anything under the Essbase Servers when trying to set the execution database though.
In version 9, we were not using Shared Services for Essbase security. Unfortunately our consultant chose to set it up using Shared Services security when migrating, and according to the documentation, one cannot go back to using Native Essbase security.
I also tried running the Externalize Users wizard and the three users with issues failed to externalize. My own id did, and the native user I created succeeded.
Has anyone experienced an issue like this or have any ideas on how to resolve?
Thanks,
Sabrina

Follow up - Oracle has finally resolved this. It's so simple, yet no one thought to check until now. The three users with problems all have mixed case user id's in ldap. They have always logged into EAS with all lower case ids. In version 9, on native security, this was never a problem. But in version 11 using Shared Services (not sure which factor changed it), it doesn't work. The simple solution is to log in with their exact mixed case user ids. It only took Oracle three months and the creation of a bug issue to figure this out for us.
Sabrina

Error in Connecting the Oracle Attunity Source in SSIS package

Hi ,
May this question might have been posted before but as far as i am concerned i was not able to find the solution i am looking after , so please help me out on this .
I am using the Oracle Attunity Software to connect to the Oracle source and the Testing is also successful but during Run time the Attunity Oracle source is failing and the Error found was as shown below
[Oracle Source [65]] Error: The AcquireConnection method call to the connection manager Oracle Connector 1 failed with error code 0x80004005. There may be error messages posted before this with more information on why the AcquireConnection method
call failed.
[SSIS.Pipeline] Error: Oracle Source failed validation and returned error code 0x80004005.
[SSIS.Pipeline] Error: One or more component failed validation.
Error: There were errors during task validation.
Validation is completed
[Connection manager "Oracle Connector 1"] Error: OCI error encountered. ORA-01005: null password given; logon denied
Warning: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (5) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified
in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
I have tried the following solutions like changing the "Run64BitRuntime" to False also but its not working and i have even tried converting my package Protection Level with the "EncryptSensitiveWithPassword" but still of no use
Please help me out
Thanks & Regards,
Santosh

Hi Santosh,
Please try to run the package under a proxy account, here is the article regarding how to schedule a package the safe way with SQL Server Agent:
http://microsoft-ssis.blogspot.com/2010/12/how-to-schedule-package-save-way-with.html
Regards,
Elvis Long
TechNet Community Support
Oh.. much Thanks :) Let me try that

Error Connecting to Oracle from J2EE SDK1.4

I am getting the following error when trying to Ping Oracle from a J2EE 1.4 SDK:
Operation 'pingConnectionPool' failed in 'resources' Config Mbean. Target exception message: Error getting connection from the EIS
I have the following connection information
<jdbc-connection-pool connection-validation-method="auto-commit" datasource-classname="oracle.jdbc.pool.OracleDataSource" fail-all-connections="false" idle-timeout-in-seconds="300" is-connection-validation-required="false" is-isolation-level-guaranteed="true" max-pool-size="32" max-wait-time-in-millis="60000" name="OraclePool" pool-resize-quantity="2" steady-pool-size="8" transaction-isolation-level="read-uncommitted">
<property name="url" value="jdbc:oracle:thin:@10.1.4.98:1609:thesid"/>
<property name="password" value="password"/>
<property name="user" value="test"/>
</jdbc-connection-pool>
Can anyone give me any pointers?

It looks okay to me. The only thing that jumped out at me is that normally Oracle is on 1521, not the current port you have. Otherwise, I'll drop back 15 and punt on this one.
- Saish
"My karma ran over your dogma." - Anon

Error while running SSIS package from Integration service or via Job

Hi All,
I encounter the below error while running SSIS Package from Job or integration service. However on execution completes success fully while running from data tools. The issue occurs after migration to 2012 from 2oo5 dtsx. PFB the error.
SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on OLE DB Source returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by
the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
A buffer failed while allocating 10485760 bytes.
The system reports 26 percent memory load. There are 206110765056 bytes of physical memory with 150503776256 bytes.
free. There are 2147352576 bytes of virtual memory with 185106432 bytes free. The paging file has 208256339968 bytes with 145642921984 bytes free.
The package also runs successfully from other servers. This happens only in one of our server.seems like issue with some sql configuration.

Hi ,
Are you running using SQL Agent Job and Data tools on same server or different?
If it is executing fine using Data tools and failing with Job it might be User credentials issue.Try
to run Job with your credentials by using proxy .
Regards,
Prathy
Prathy K

Run SSIS Package (SQL Database on Different Server) from Data Manager.

Hi- How to run a SSIS package from BPC Data Manager -This package connects to another SQL Server Database and creates a text file. This text file is the source to BPC custom tasks CONERTTASK and DUMPLOAD task to load to BPC.
Here is the flow of the complete package- Dataflow (Create the text file from a SQL Database)
CONVERT TASK (Convert the file to BPC Format)
DUMPLOAD TASK (Load the converted file to BPC)
Any pointer will be a great help.

Hello Pam,
When you run SSIS package with BPC DM it runs on the application server. You don't really have to run a package on a different server in order to get data from a remote database and dump it to a file. That task can be done in your SSIS package using various data sources/destinations. If that's what you are trying to do. The only thing is, your BPC admin user (the one you used to install BPC) has to have an appropriate privileges on a remote server.
Hope that helps.
Regards,
Akim

Error connecting to OPMN (is it running?): Connection refused:

I have installed SOA in my laptop and started the SOA suite and completed the Hello world example program. To deploy I am trying to create Integration Server connection and selected connection Type as "Oracle Application Server 10g 10.1.3." and when I am trying to test the connection I am getting below error.
Error getting OC4J process for: opmn-home+oc4j-localhost-6003-default:
Error connecting to OPMN (is it running?): Connection refused: connect
I have not changed any default values
HostName : localhost OPMN Port : 6003
OC4J Instance Name : home
Could you please let me know if anything missing information.
Regards
Kiran Akkiraju

I am able to create Connection now. System is defaulting port as 6003 instead of 6004. I have changed the port after seeking OPMN configuration XML file.
Regards
Kiran Akkiraju

Premiere Elements 12.1 Constantly Connecting To The Internet When Running

Hi there!
I have an issue with Premiere Elements 12.1 constantly connecting to the Internet when running... it looks like it is either trying to connect to something or downloading something.
Premiere runs OK, but it is very slow: this is due to it trying to connect. (We've proved this by running the program without the Internet disabled... it sits at about 13,000K in memory... and works fine).
Anybody got any idea why it is connecting to the Internet in the first place and how we can stop it doing it.
We believe this issue started when we updated to v 12.1... but can't be sure!
We have tried uninstalling and re-installing it... same problem. We're virus checked till all night... nothing found (no root kits, nothing etc.)
We're running Win XP Service Pack 3, 32 bit... I know 'Windows XP is old etc. etc. etc.'. Yet it still works great and is nice and fast for us here.
Any advice/suggestions greatly received!
Thanks in advance,
GRBaker

Hi Steve,
Thanks a bunch for the post... we're certainly experiencing no other issues besides the 'downloading' issue on Premiere... various virus/spyware etc. scans have revealed nothing. There's nothing odd in the Startup or process list...
PC operates entirely as normal... no unusual performance lags/Internet disconnections etc. No issues with other software, so far, after installing Elements.
So we're currently leaving the program on to 'download' (or whatever it is doing), so it could be that it will eventually stop constantly accessing the Internet.
We are already in contact with Adobe and they are keeping pretty tight-lipped about what it might be doing... saying (so far) only that Photoshop Elements/Premiere 12 does connect to CloudFront to 'download fonts'... (they were also basically indicating they thought it was our PC/a faulty install until we mentioned we knew it was CloudFront it was trying to connect to...)
...if the applications need to download stuff, then all Adobe has to say is 'it's perfectly normal, just wait for it to complete' then we would not be worried! All it needs is a simple notice to say that 'some additional downloads are required': give us a progress bar or something... no problem!
I can't think why else it would be connecting to the Internet???? (Well, a couple do come to mind..!)
We did pay for the download version of the software (we don't have physical installation DVDs) from one of Adobe's Registered resellers, so maybe that has something to do with it.
I suspect you are 100% correct and that it isn't in fact a bug, bit simply some additional data/content that needs to download etc. If this is the case, then maybe it is related to our broadband speed (which can variable as we live in a rural location).
As you say, if it was a bug everybody would have it! There is that thread I mentioned above, but that's for a previous version of elements I think... to me, as the user experiencing the issue, it definitely looks like a bug as it's rendering the software unstable!
Most likely it's just our bad luck and there's something specific to my installation that's tripping the software and causing the issue. I suppose it depends how you define 'bug'... if it's a normal operation of the software that just happens to disagreeing with my system... than Adobe would say 'that's not a bug'... but I would say 'it's a bug as it causes this problem'. It simply a question of perspective!
Anyway, it's mystifying to me: the software runs GREAT, when it's not trying to access the Internet. It's weird. You certainly can't complain, for price, it really is excellent software!
Cheers,
GRB

Error connecting to OPMN (is it running?)

Hi All,
Might this be a silly question but please help me out.
I have 10g AS installed on Solaris.I need to get the datasource lookup from my localhost standalone java application .
This is the code i have used:
Hashtable env = new Hashtable();
env.put(Context.INITIAL_CONTEXT_FACTORY,
          "com.evermind.server.rmi.RMIInitialContextFactory");
env.put(Context.SECURITY_PRINCIPAL, "ias_admin");
env.put(Context.SECURITY_CREDENTIALS, "admin123");
env.put(Context.PROVIDER_URL, "opmn:ormi://mysolarisserver:12425");
try {
     Context ctx = new InitialContext(env);
     DataSource ds = (DataSource) ctx.lookup("jdbc/OracleDS");
     con = ds.getConnection();
} catch (Exception e) {
e.printStackTrace();
Exception I get is:
Error: Error connecting to OPMN (is it running?): Connection refused: connect
javax.naming.NameNotFoundException: jdbc/csmsDS not found
     at com.evermind.server.rmi.RMIContext.lookup(RMIContext.java:164)
     at javax.naming.InitialContext.lookup(InitialContext.java:347)
     at code.MyHybernateTest123.getConnection(MyHybernateTest123.java:102)
     at code.MyHybernateTest123.main(MyHybernateTest123.java:36)
I have verified for the list of ports in Enterprise Manger and could get the 12425 as port in use for RMI.
Please help me out.
Thanks in advance.
Cheers,
Bhuvan.

Hi Steve,
Thanks for the reply and it was informative.
Here is the scenario which im actually working on.
I have a client running in local host and i need to get the datasource configured in a instance (or a component) created in oc4j.The oc4j is installed on remote system in solaris environment.So can u suggest /provide the details of lookup .
Im trying to use: ormi and the code i have written is:
env.put(Context.INITIAL_CONTEXT_FACTORY,
          "com.evermind.server.rmi.RMIInitialContextFactory");
          env.put(Context.SECURITY_PRINCIPAL, "admin");
          env.put(Context.SECURITY_CREDENTIALS, "admin");
          env.put(Context.PROVIDER_URL, "ormi://myserver:12425");
          try {
               Context ctx = new InitialContext(env);
               DataSource ds = (DataSource) ctx.lookup("jdbc/myOracleDS");
          con = ds.getConnection();
          } catch (Exception e) {
          log.error(e);
Here 12425 is the rmi port of the component in which i configured the datasource.
I get the following exception:
javax.naming.NamingException: Lookup error: java.net.ConnectException: Connection refused: connect; nested exception is:
     java.net.ConnectException: Connection refused: connect [Root exception is java.net.ConnectException: Connection refused: connect]
     at com.evermind.server.rmi.RMIContext.lookup(RMIContext.java:168)
     at javax.naming.InitialContext.lookup(InitialContext.java:347)
     at code.MyHybernateTest123.getConnection(MyHybernateTest123.java:103)
     at code.MyHybernateTest123.main(MyHybernateTest123.java:36)
Caused by: java.net.ConnectException: Connection refused: connect
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:305)
     at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:171)
     at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:158)
     at java.net.Socket.connect(Socket.java:452)
     at java.net.Socket.connect(Socket.java:402)
     at java.net.Socket.<init>(Socket.java:309)
     at java.net.Socket.<init>(Socket.java:153)
     at com.evermind.server.rmi.RMIConnection.connect(RMIConnection.java:2324)
     at com.evermind.server.rmi.RMIConnection.lookup(RMIConnection.java:1781)
     at com.evermind.server.rmi.RMIServer.lookup(RMIServer.java:721)
     at com.evermind.server.rmi.RMIContext.lookup(RMIContext.java:149)
     ... 3 more
Please help me out.Im struck with this issue for the past 2 weeks.
Thanks in advance
Cheers,
Bhuvan

"Errors occurred during the extraction" when run RSA3 of EBP datasource 0DO

"Errors occurred during the extraction" when run RSA3 of EBP datasource 0DOC_NUMBER_ATTR.
What would be the reason and how to resolve this problem?
Thanks

Hi Kevin,
Generally the installed DS also comes under RSA5 nodes, not only in RSA6.
Have you activated it earlier before extraction?
If DS is already active, please try to follow all the steps once more, and check, and let us know if still the same error comes.
Cheers!!!!!!!!!!!

Problem Running SSIS Package with a SQL Server Agent

SQL Server: SQL Server 2012
VS: Visual Studio 2012
Hello,
      I have been having a problem running SSIS packages by using a SQL Server Agent job. I first created these SSIS packages in a separate IS project in Visual Studio. I imported the packages to the Integration Services (Package
Store) instance on my SQL Server and tried to create a job that would run them from there.
      At first I read around about needing a proxy account to allow the agent/packages to access the file system since these packages are importing data from a flat file in the SQL database. So I created a temporary admin user to
use as the user for the agent. I did this by going to Services.msc on the server and linked the account the agent's "logon as". Then arose another issue where I am getting an error about using the incorrect type for my connection managers.
The connection manager "TestFile" is an incorrect type. The type required is "OLEDB". The type available to the component is "FLATFILE". Source: Data Flow Task Flat File Destination [2]     Description:
Cannot open the datafile "O:\*****\Success.txt"
I am not sure what this even means as I am getting this error even with a test package that doesn't do anything with the database. I have just two flat file connection managers in this test project one for grabbing the source file and one for
creating the new test file.
I am not sure what to do.
Thanks in advance,
Matt

I accidently created two posts. The newest one has the details.
I did not mean to.
SQL Server: SQL Server 2012
VS: Visual Studio 2012
Hello,
      I have been having a problem running SSIS packages by using a SQL Server Agent job. I first created these SSIS packages in a separate IS project in Visual Studio. I imported the packages to the Integration Services (Package
Store) instance on my SQL Server and tried to create a job that would run them from there.
      At first I read around about needing a proxy account to allow the agent/packages to access the file system since these packages are importing data from a flat file in the SQL database. So I created a temporary admin user to
use as the user for the agent. I did this by going to Services.msc on the server and linked the account the agent's "logon as". Then arose another issue where I am getting an error about using the incorrect type for my connection managers.
The connection manager "TestFile" is an incorrect type. The type required is "OLEDB". The type available to the component is "FLATFILE". Source: Data Flow Task Flat File Destination [2]     Description:
Cannot open the datafile "O:\*****\Success.txt"
I am not sure what this even means as I am getting this error even with a test package that doesn't do anything with the database. I have just two flat file connection managers in this test project one for grabbing the source file and one for
creating the new test file.
I am not sure what to do.
Thanks in advance,
Matt

Run SSIS package at scheduled time without running SSIS service

Hello
I want to run SSIS Package using SQL Agent job, But for some reason, I am allowed to install SSIS services on the server. Is there any way to run SSIS package without running SSIS service? I tried using DTEXEC.exe command, but it still give an error. "To
run SSIS package outside SQL server data tools you must install service".
Thanks in advance

Hi Swetha,
The service itself is not doing much (only allows to connect), but to actually execute SSIS packages naturally you have to have the Integration Services installed where you want to run the package. Likewise, if you have SSIS installed elsewhere you can run
it remotely off the local SQL Agent that connects to a remote package.
Arthur My Blog

Run SSIS package in a machine without Sql Server

Hi All,
I have 3 packages which are doing fairly easy job. First uploading flat file to remote server from my local machine. Second does some transformation and third load file back to my local machine. I am running all of them through batch file. Now, I have to
run those 3 batch files in my colleague machine which doesn't have any instance of MSSQL or Visual Studio.I sent batch files to his machine and when he runs, first one is working probably which uploads file to remote server, however second batch file doesn't
working. My guess is because batch file has some tsql syntax whereas he doesn't have MSSQL is making issue. (I added the code below). Is it possible? I can not install SQL Server to his machine but I need to run these packages(or batch files). Is there any
idea how to achieve this? Thanks in advance for your input.
osql -U sa -P mypassword -S myremoteserver -Q "msdb.dbo.sp_start_job N'ExistingOpp'"
pause

Hi Ozkantr,
The osql utility is installed by SQL Server. You need to make sure the utility is installed on your colleague machine.
To run SSIS package outside the BIDS, only the DTExec utility which is a client tool is not enough, the server components for Integration Services Service (SSIS runtime) is also required. To install SSIS runtime and DTExec utility, we must install the Integration
Services shared feature from the SQL Server install media. So, you need to install SSIS service on the machine where the SSIS packages jobs run.
References:
http://www.bigator.com/2012/03/11/ways-to-execute-ssis-package/
http://www.codeproject.com/Articles/219494/SSIS-Overview-Part-I
Regards,
+1
You need to install Integration Services, which installs the necessary bytes on your computer and the SSIS service as well. The service can be disabled though, you don't need it to run packages.
I wrote a blog post about it some time ago:
When is DTEXEC installed?
ps: osql is deprecated. Better start using sqlcmd.
MCSE SQL Server 2012 - Please mark posts as answered where appropriate.

Need to download oracle 11.1.0.7 for Microsoft Windows (32-bit)

Hi all,
I am using Repository Creation Utility (RCU) to create schema and load repository in Oracle database for Fusion Middleware components. In order to create schema and load repository to an Oracle database,Oracle strongly recommends using AL32UTF8 as the database character set.
Hence I need to install database version 10.2.0.4.0 in 10g or version equal to higher than 11.1.0.7.0 with the database character set AL32UTF8. But the Oracle Database Software Download url available through OTN do not list
oracle 10.2.0.4.0 or oracle 11.1.0.7 for Microsoft Windows (32-bit).
Appreciate if anyone can provide me any other alternate location, from where I can download oracle 10.2.0.4.0 or oracle 11.1.0.7 for Microsoft Windows (32-bit).
Thanks
Sanil.M

10.2.0.4 and 11.1.0.7 are patchsets, available on MOS/metalink only (you need a valid support contract). There's only the exception for Windows 2008,here you can get this versions on OTN.
But who did you tell characterset AL32UTF8 is not available in the basis versions?
Werner

'No more data to read from socket' error connecting to Oracle 9i

Hi,
My Java app connecting to Oracle 9i gets an error: No more data to read from socket.
Application host is running oraClient805 and JDK1.3.1_06 SE
Connection string jdbc:oracle:thin:@myhost:1521:mysid worked fine connecting to the Oracle 8 version.
I've checked tnsnames.ora, tried tnsping util to Ora 9i, it's OK. As well I could connect directly through the SQL Worksheet.
Could anyone suggest what could be wrong or different to make a connection from Java app to Oracle 9i ?
I was advised to upgrade the driver, but I am not sure what do I need. I have classes102, classes111, and classes12 in the %ORACLE_HOME%\jdbc\lib\ directory. Do I miss something?
Thanks a lot.
Tatiana

I believe there might be problems using the older drivers with oracle 9. You might search this forum for more info.

Error connecting to Oracle from when running SSIS Package on Windows 64-bit

Similar Messages

Maybe you are looking for