Error when running script to reset size - bad argument gettokenmanager

Hello,
I use RoboHelp HTML 8 (currently on 8.0.2.208) and have a project with a number of user interface images that are going to be translated. The translated images will likely be of different size, so I need to have a fast way of reseting all the image sizes in my project.
I discovered Chasnikov's script "reset all images" on the thread:
http://forums.adobe.com/message/2128583#2128583
which seems just perfect for my situation.
Not wanting to test this on my real project, I made a copy in a different location and tested out the script. The script ran for a while, but then abruptly ended with the following message:
Bad argument getTokenManager
In looking at the output window it seemed like it stopped in the middle of a topic after going through a number of topics. For my test situation, I only replaced a few graphics in a few topics and when I checked this limited sample, they all seemed to be correctly resized.
However, my concern is that if I use this script in my real project, it won't actually resize all of the images.
Any ideas why the script is terminating abruptly?
By the way, I did find a similar question about this error message in the thread http://forums.adobe.com/message/2551147
however, the solution to add the line msg(filepath); to the script resulted in another error -- RH did not recognize 'msg' as a valid command.
Thanks, Rose

Thanks Willam for the advice. In the meantime I realized that there was something wrong with my project--because the word count script also gave me the same error message -- so I ran it on another version of the project and it was just fine.
There are two questions that your response brings to mind:
1. How are you able to see the line numbers in the script?  When I edit the script, it opens in Notepad and I can't turn on line numbers. I have discovered, that if I have word wrap off, I can use Goto and specifiy a line number to go to.  Are you using a different text editor?
2. The reset size script doesn't announce that it is finished.  It just seems to stop displaying things in the output window, but it doesn't give me a message to say it has finished.  Can you recommend some code I could add to the reset size script to output that it has finished processing sucessfully?
Thanks in advance.
Rose

Similar Messages

  • Loading script "script path-name" failed (0xC0000006) error when running scripts from DFS

    We have this issue where any number of random scripts that execute at startup will produce the following error when run from DFS:
    The status code for this error equates to STATUS_IN_PAGE_ERROR - The instruction at 0x%p referenced memory at 0x%p. The required data was not placed into memory because of an I/O error status of 0x%x.
    This does not always happen each time and the script can be random. If we move the script(s) to a non DFS, we do not see this. I believe the issue is being caused by a minute disconnect to the DFS for whatever script is attempting to execute at that
    moment. This happens across a few (consistent) offices on different computers.
    Any ideas?

    Hi,
    According to your description, my understanding is that you run scripts in a shared folder which is added to a DFS Namespace, then the error prompt. However, you can run the scripts when you directly access the shared folder.
    What scripts did you run? Is there any error message in the Event Log? If so, please provide us the detailed error message for our further research.
    Best Regards,
    Mandy 
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Error when running script from OTM

    Hi team,
    Customer is trying to run script from OTM but is getting a "JWG file does not exist" error. I found the following metalink note and the customer has verified that the repositories are defined with exactly the same names & paths in OTM & Openscript.
    Scripts Failing To Play Back From OATS Test Manager (OTM) (Doc ID 1587941.1)
    I've also checked the following post in the forums but this doesn't apply to the customer because both the OTM & agent are on Windows:
    https://forums.oracle.com/message/10707963
    Appreciate any pointers
    Thanks,
    Krishna

    Hi Krishna
    Is the agent running as a windows service or started from an interactive batch?
    What kind of script is that? Web, Forms, Siebel, other?
    Are they different repositories or the same? If different, how do you copy scripts from one to the other one?
    Cheers
    JB

  • DatabankedFile error when running script in ELoad

    Hi,
    I have a script that we are using to import a bunch of records into one of our defect management tools. As part of the script, some attachments need to be uploaded to the server. My e-tester script running in navigation editor runs just fine, but when I play it back in E-Load it errors out when it hits the page with the DatabankedFile variable which contains the contents of the file to be upload.
    Is there something I'm missing that its working in nav editor but failing during e-Load playback?
    My DatabankedFile properties looks something like this:
    DatabankedFile :
    Encode : False
    FileLocation : C:\tmp\MyTestAttachment.txt
    InternalValue : {{_file_C:\\tmp\\MyTestAttachment.txt}}
    Type : File
    Thanks!
    Jim

    This wouldn't be the first time that debugging code has caused my problems.  I tried a little experment and reduced my script even further to
    main();
    function openEvent()
    //noop
    function main()
            var eventListener1 = app.addEventListener("afterOpen", openEvent, false);
    and that still threw the same error.  I don't see how it could be any simpler than this.  So was afterOpen in CS4 completly and utterly broken?  It can't be, there might be something I was doing horribly wrong.  I went back to the scripting guide and found that I was missing
    #targetengine "session"
    Which I believe was suggested earlier by Harbs.  Adding that in solved the problem.  Thanks for your help!

  • Xp_cmdshell raising error when running script on a remote server by server authentication

    Sqlcmd: Error: Error occurred while opening or operating on file C:\ewApps\Source\MyIssueApp\Scripts\DBScripts\issueUpdateSchemaVersion.sql (Reason: The system cannot find the path specified).
    here is my sql script-
    Declare @ScriptVersion ='1.1'
    Declare @TargetScriptVersionNo = '1.1'
    Declare @DBServerName VARCHAR(50)= 'remote-a'
    Declare @DBName VARCHAR(50)='mydb'
    Declare @FilePath NVARCHAR(MAX)= 'C:\ewApps\Source\MyIssueApp\Scripts\DBScripts\issueUpdateSchemaVersion.sql'
    DECLARE @UserName VARCHAR(10) = 'sa'
    DECLARE @Password VARCHAR(20) = 'sql1k9@abcd'
    DECLARE @Command =''
    set @Command = ' sqlcmd -S ' + @DBServerName + ' -U ' + @UserName + ' -P '+ @Password + ' -d ' + @DBName + ' -i "'+ @FilePathForAllScript + '" -v SubScriptVersion=''' + @VersionNumber + ''''
    EXEC xp_cmdshell @Command
    the generated string @command is -
    sqlcmd -S ewp-dev14 -U sa -P sql2k8@dev14 -d a -i "C:\ewApps\Source\MyIssueApp\Scripts\DBScripts\issueUpdateSchemaVersion.sql" -v SubScriptVersion='1.1'
    and also
    sqlcmd -S ewp-dev14 -U sa -P sql2k8@dev14 -d a -i C:\ewApps\Source\MyIssueApp\Scripts\DBScripts\issueUpdateSchemaVersion.sql -v SubScriptVersion='1.1'
    i think this is a long path related issue, but when i pass a small path, it works like c:\ewapps\issueUpdateSchemaVersion.sql, but i cant use small path , the path mentioned above is mandatory..
    i dont have any space in my path still i have tried it by applying both "" (double codes) and without double codes but its not working, and showing following error-
    Sqlcmd: Error: Error occurred while opening or operating on file C:\ewApps\Source\MyIssueApp\Scripts\DBScripts\issueUpdateSchemaVersion.sql (Reason: The system cannot find the path specified).
    all the above parameters are coming from a batch file.
    Note- My this server is at TFS, can it be an issue ?? please help...

    Yes, files are properly located.
    than what can be the solution for this ??
    Double-check and triple-check. Computers rarely lie. If the machine says The system cannot find the path specified that rarely means
    I'm just too lazy be bothered right now, and that's why I don't find it.
    Run "xp_cmdshell 'DIR'" on various parts in the path to troubleshoot:
    xp_cmdshell 'DIR C:\ewApps\Source\MyIssueApp\Scripts\DBScripts\issueUpdateSchemaVersion.sql'
    xp_cmdshell 'DIR C:\ewApps\Source\MyIssueApp\Scripts\DBScripts\'
    etc, with and without quotes.
    Erland Sommarskog, SQL Server MVP, [email protected]

  • Error when running script

    Hi,
    I am trying to run this script
    //Select statements
    *SELECT(%ACCOUNT_SRC%,[ID],"ACCOUNT","[PMATCH_ACCOUNT]<>'' AND [CALC]='N' ")
    *SELECT(%ENTITY_SRC%,[ID],"ENTITY","[INTCO]<>''")
    *SELECT(%INTCO_SRC%,[ID],"INTCO","[ENTITY]<>''")
    *XDIM_MEMBERSET ACCOUNT=%ACCOUNT_SRC%
    *XDIM_MEMBERSET ACCTDETAIL=F_CLO,F_CLO_INTCO,F_CLO_INTCO_LC
    *XDIM_MEMBERSET CONSOLVIEW=LC,USD,TC
    *XDIM_MEMBERSET CATEGORY=%CATEGORY_SET%
    *XDIM_MEMBERSET TIME=%TIME_SET%
    *XDIM_MEMBERSET ENTITY=%ENTITY_SRC%
    *XDIM_MEMBERSET INTCO=%INTCO_SRC%
    *LOOKUP CRATE
    *DIM RATEENTITY="GLOBAL"
    *DIM SRC_END: INPUTCURRENCY=Entity.CURRENCY
    *DIM SRC_END: CRATE="END"
    *DIM SRC_AVG: INPUTCURRENCY=Entity.CURRENCY
    *DIM SRC_AVG: CRATE="AVG"
    *DIM USD_END: INPUTCURRENCY="USD"
    *DIM USD_END: CRATE="END"
    *DIM USD_AVG: INPUTCURRENCY="USD"
    *DIM USD_AVG: CRATE="AVG"
    *ENDLOOKUP
    *WHEN ACCTDETAIL
    *IS F_CLO_INTCO_LC,F_CLO_INTCO
    *REC(EXPRESSION=0)
    *IS F_CLO
    *WHEN CONSOLVIEW
    *IS LC
    *WHEN ACCOUNT.RATETYPE
    *IS END,ENDFLOW
    *REC(FACTOR=-LOOKUP(USD_END)/LOOKUP(SRC_END),ACCTDETAIL=F_CLO_INTCO,ACCOUNT=ACCOUNT.PMATCH_ACCOUNT,CONSOLVIEW=USD,ENTITY=INTCO.ENTITY,INTCO=ENTITY.INTCO)
    *REC(FACTOR=-1,ACCTDETAIL=F_CLO_INTCO,ACCOUNT=ACCOUNT.PMATCH_ACCOUNT,CONSOLVIEW=LC,ENTITY=INTCO.ENTITY,INTCO=ENTITY.INTCO)
    *REC(FACTOR=1,ACCTDETAIL=F_CLO,ACCOUNT=ACCOUNT.PMATCH_ACCOUNT2,CONSOLVIEW=LC)
    *REC(FACTOR=LOOKUP(USD_END)/LOOKUP(SRC_END),ACCTDETAIL=F_CLO,ACCOUNT=ACCOUNT.PMATCH_ACCOUNT2,CONSOLVIEW=USD)
    *REC(FACTOR=LOOKUP(USD_END)/LOOKUP(SRC_END),CONSOLVIEW=USD)
    *IS AVG
    *REC(FACTOR=-LOOKUP(USD_AVG)/LOOKUP(SRC_AVG),ACCTDETAIL=F_CLO_INTCO,ACCOUNT=ACCOUNT.PMATCH_ACCOUNT,CONSOLVIEW=USD,ENTITY=INTCO.ENTITY,INTCO=ENTITY.INTCO)
    *REC(FACTOR=-1,ACCTDETAIL=F_CLO_INTCO,ACCOUNT=ACCOUNT.PMATCH_ACCOUNT,CONSOLVIEW=LC,ENTITY=INTCO.ENTITY,INTCO=ENTITY.INTCO)
    *REC(FACTOR=1,ACCTDETAIL=F_CLO,ACCOUNT=ACCOUNT.PMATCH_ACCOUNT2,CONSOLVIEW=LC)
    *REC(FACTOR=LOOKUP(USD_AVG)/LOOKUP(SRC_AVG),ACCTDETAIL=F_CLO,ACCOUNT=ACCOUNT.PMATCH_ACCOUNT2,CONSOLVIEW=USD)
    *REC(FACTOR=LOOKUP(USD_AVG)/LOOKUP(SRC_AVG),CONSOLVIEW=USD)
    *ENDWHEN
    *IS TC                                                                                //für TC
    *REC(FACTOR=-1,ACCTDETAIL=F_CLO_INTCO,ACCOUNT=ACCOUNT.PMATCH_ACCOUNT,CONSOLVIEW=TC,ENTITY=INTCO.ENTITY,INTCO=ENTITY.INTCO)
    *REC(FACTOR=1,ACCTDETAIL=F_CLO,ACCOUNT=ACCOUNT.PMATCH_ACCOUNT2,CONSOLVIEW=TC)     
    *ENDWHEN
    *ENDWHEN
    *COMMIT
    *WHEN ACCTDETAIL
    *IS F_CLO_INTCO
    *WHEN CONSOLVIEW
    *IS USD
    *WHEN ACCOUNT.RATETYPE
    *IS END,ENDFLOW
    *REC(FACTOR=LOOKUP(SRC_END)/LOOKUP(USD_END),ACCTDETAIL=F_CLO_INTCO_LC,CONSOLVIEW=LC)
    *IS AVG
    *REC(FACTOR=LOOKUP(SRC_AVG)/LOOKUP(USD_AVG),ACCTDETAIL=F_CLO_INTCO_LC,CONSOLVIEW=LC)
    *ENDWHEN
    *ENDWHEN
    *ENDWHEN
    *COMMIT
    but I do get the following error:
    RUN_LOGIC:Property value not found
    Is there a way to find out which property and/or value is causing this problem? Or does anyone have an idea what would cause this error?

    Found one member in the account dimension that had only PMATCH_ACCOUNT but not PMATCH_ACCOUNT2 filled out. Once I added PMATCH_ACCOUNT2 it worked.

  • Spinning beach ball of death - Error when running Chrome - kernel: IOSurface: buffer allocation size is zero

    I get the following error when running Chrome v18.0.1025.163 on my MacBook Pro with MacOS 10.7.3
    kernel: IOSurface: buffer allocation size is zero
    I have had many tabs crash, then it crashes the Chrome application, then quickly making my entire Mac unresponsive with a spinning beach ball of death.  I am not sure if it is Chrome or not, as I tend to do most of my work these days in a browser. 
    Have others seen this?  Is there a fix?  What can I do to stop these crashes?

    As far as I've been able to discover, this bug is specific to WebKit browsers running (Chrome and Safari are based on WebKit).  Perhaps it is related to those browsers running plugins (like Flash) and using an IOSurface to pass the rendering data back from the plugin.  This issue was constant on my late 2010 MBP and would freeze the machine entirely once a day.  Having switched to using Firefox or Opera I no longer see ANY messages for "IOSurface: Buffer allocation size is zero".  Thankfully, this also comes without any more freezing when time machine starts up or at any other time.
    It looks like there are a lot of changes going on in WebKit relating to IOSurface usage (http://svnsearch.org/svnsearch/repos/WEBKIT/search?logMessage=iosurface).  Hopefully this will be fixed very soon.

  • Getting the below error when running the Baseline.grf for the first time

    I am getting the below error when running the Baseline.grf for the first time.
    Appreciate your support in resolving it.
    Error below:
    INFO [main] - *** CloverETL framework/transformation graph, (c) 2002-2012 Javlin a.s, released under GNU Lesser General Public License ***
    INFO [main] - Running with CloverETL library version 3.2.1 build#63 compiled 04/01/2012 12:53:21
    INFO [main] - Running on 4 CPU(s), OS Windows 7, architecture amd64, Java version 1.6.0_20, max available memory for JVM 901120 KB
    INFO [main] - Loading default properties from: defaultProperties
    INFO [main] - Graph definition file: graph/Baseline.grf
    INFO [main] - Graph revision: 1.114 Modified by: mkressirer Modified: Thu Apr 12 13:27:18 EDT 2012
    INFO [main] - Checking graph configuration...
    INFO [main] - Graph configuration is valid.
    INFO [main] - Graph initialization (Baseline)
    INFO [main] - [Clover] Initializing phase: 0
    INFO [main] - [Clover] phase: 0 initialized successfully.
    INFO [main] - register MBean with name:org.jetel.graph.runtime:type=CLOVERJMX_1306871483270_0
    INFO [WatchDog] - Starting up all nodes in phase [0]
    INFO [WatchDog] - Successfully started all nodes in phase!
    INFO [RUN_GRAPH1_0] - Running graph ./graph/InitDataStore.grf in the same instance.
    INFO [RUN_GRAPH1_0] - Checking graph configuration...
    INFO [RUN_GRAPH1_0] - Graph configuration is valid.
    INFO [RUN_GRAPH1_0] - Graph initialization (InitDataStore)
    INFO [RUN_GRAPH1_0] - [Clover] Initializing phase: 0
    WARN [RUN_GRAPH1_0] - WS messenger cleanup failed.
    java.lang.NullPointerException
         at org.apache.axis2.client.Stub.cleanup(Stub.java:134)
         at com.opensys.cloveretl.component.WebServiceClient.free(Unknown Source)
         at org.jetel.graph.Phase.free(Phase.java:487)
         at org.jetel.graph.TransformationGraph.freeResources(TransformationGraph.java:681)
         at org.jetel.graph.TransformationGraph.free(TransformationGraph.java:955)
         at org.jetel.graph.runtime.PrimitiveAuthorityProxy.executeGraph(PrimitiveAuthorityProxy.java:149)
         at org.jetel.component.RunGraph.runGraphThisInstance(RunGraph.java:511)
         at org.jetel.component.RunGraph.runSingleGraph(RunGraph.java:409)
         at org.jetel.component.RunGraph.execute(RunGraph.java:302)
         at org.jetel.graph.Node.run(Node.java:414)
         at java.lang.Thread.run(Thread.java:619)
    WARN [RUN_GRAPH1_0] - Some graphs wasn't executed (because graph "./graph/InitDataStore.grf" finished with error).
    WARN [RUN_GRAPH1_0] - Some graph(s) finished with error.
    ERROR [WatchDog] - Graph execution finished with error
    ERROR [WatchDog] - Node RUN_GRAPH1 finished with status: ERROR caused by: Graph './graph/InitDataStore.grf' failed!
    ERROR [WatchDog] - Node RUN_GRAPH1 error details:
    org.jetel.exception.JetelException: Graph './graph/InitDataStore.grf' failed!
         at org.jetel.component.RunGraph.execute(RunGraph.java:324)
         at org.jetel.graph.Node.run(Node.java:414)
         at java.lang.Thread.run(Thread.java:619)
    INFO [WatchDog] - [Clover] Post-execute phase finalization: 0
    INFO [WatchDog] - [Clover] phase: 0 post-execute finalization successfully.
    INFO [WatchDog] - Execution of phase [0] finished with error - elapsed time(sec): 2
    ERROR [WatchDog] - !!! Phase finished with error - stopping graph run !!!
    INFO [WatchDog] - -----------------------** Summary of Phases execution **---------------------
    INFO [WatchDog] - Phase# Finished Status RunTime(sec) MemoryAllocation(KB)
    INFO [WatchDog] - 0 ERROR 2 20132
    INFO [WatchDog] - ------------------------------** End of Summary **---------------------------
    WARN [exNode_0_1306871483270_RUN_GRAPH1] - Attempt to unregister non-registered thread in the ContextProvider.
    ./graph/InitDataStore.grf: Execution of graph failed! Error during graph initialization: Phase 0 can't be initilized.
    INFO [WatchDog] - WatchDog thread finished - total execution time: 2 (sec)
    INFO [main] - Freeing graph resources.
    ERROR [main] - Execution of graph failed !

    It can't find an Endeca specific class when running via the clover command line utility. Thus, the classpath being set in that shell script is not incorporating the .jar files where the endeca-specific classes are packaged. I would start by adding an line to see what your classpath is set to. There are actually already some lines of shell script in clover that you can uncomment to see what .jars are getting loaded:
    #echo $CLOVER_LIB/*
    for i in $CLOVER_LIB/*.jar $CLOVER_LIB/*.zip; do
         LOCAL_CLASSPATH="$LOCAL_CLASSPATH:$i"
    done;
    #for i in `ls $CLOVER_LIB/*.jar`; do
    #echo $i
    #done;
    You could also echo LOCAL_CLASSPATH to see what is getting set there. At the end of the day, you will need the endeca-specific jars to load which can be found here: /Endeca/Discovery/2.3.0/Integrator/plugins/com.endeca.latitude_1.0.0/*
    HTH,
    Dan
    http://branchbird.com

  • Error when running allocation logic

    I am running the following allocation logic and get the following error:
    *RUNALLOCATION
    *FACTOR=USING/TOTAL
    *DIM P_ACCT WHAT=CE0004010; WHERE=CE0004020; USING=CE0004030; TOTAL=<<<
    *DIM ENTITY WHAT=A1000; WHERE=<<<; USING=<<<; TOTAL=<<<
    *DIM TIME WHAT=2009.JAN; WHERE=>>>; USING=BAS(2009.TOTAL); TOTAL=<<<
    *ENDALLOCATION
    UJP_RULE_EXCEPTION:Missing [] on property name: WHAT=CE0004010. I get this error when executing the script using the program "UJK_SCRIPT_LOGIC_TESTER". I also get a similar error when running it via the data manager package.
    Any thoughts on why this error is happening?

    Hi Sanjay,
    I think you are using formula property for any of the dimension member used in the Allocation logic.
    FYI Allocation will not work fine for the dimension members which is calculated using the formula written in the formula Property.
    There is no problem with your script it looks fine.
    Hope this might help you.
    Regards,
    G.Vijaya Kumar

  • Corba error when running rich clients in 3-tier mode.

    Hello
    I am dealing with an Error when running Rich Clients (WebI and DeskI) with 3-tier ODBC connection to the server.
    The client does come up and I'm able to create the query but when the data in refreshed I do get the error:
    A database error occured. The database error text is: (CS) "CORBA Initialization failed". (WIS 10901).
    I have a test server which I'm able to do this kind of connection without a problem but when I try to connect to the Prod server in 3-tier data connection mode throught the server I get this error.
    My setup is:
    BO XI R 3.1 FP. 2.1
    Clients are also updated with FP 2.1
    The data sources are Oracle and Teradata.
    Best regards,
    Hjortur.

    Hi Guys,
    I am facing same error when I run the report from CMC. Error is like u201CThe database error text is: (CORBA) "Error on Executeu201D. (WIS 10901)u201DEven I have re-started the connection server but bad luck.
    I would like to appreciate if someone help me out for the same.
    Thanks in advance..!!
    Thanks & Regards,
    Keyur Modi | Functional Consultant Enterprise Solutions
    TATA Technologies, Pune
    m: +91-9769855899
    website: www.tatatechnologies.com

  • Getting error when running process flows in oem

    Hi all,
    I'm trying to run a process flow in oem (using oem_exec_template.sql script), but it keeps failing with error "nms-1013: sqlplus does not exist". I tried running a map too and it failed with same message.
    Any idea anyone?
    Thanks!
    Yanet

    Hi,
     Looks like you have an obvious code error, invalid cast operation in your code. Do you get this error when running in local emulator.
     You can try the following article on how to debug published cloud service, assuming you have VS ultimate.
     https://msdn.microsoft.com/en-us/library/azure/ff683671.aspx
    Regards,
    Nithin Rathnakar

  • ADT packaging with native extensions : permission denied error when running remote build.

    Hi Team,
    We are facing the following error when running the nightly ant build script on Mac machine for our air mobile application. We are using iOS native extensions and package with ADT. This works fine when we run the build as local user in the Mac machine. Earlier we faced some issues due to headless build and we have added the <headless-server>true</headless-server> in corresponding config files (flex-config.xml, airmobile-config.xml). After that we are facing the following error, even when we run the ant build in headless mode using the following command.
    ant -Djava.awt.headless=true -f build.xml buildPackage
    When running this build as local user in the Mac build machine, we see a window opening with com.adobe.air.ADT while packaging. This is the issue when running nightly build as there is no graphics window.
    Can anybody please help how to get rid of this issue for nightly build using adt,jar?
    Here is the error from build log:
    buildiOSPackageWithNativeExtensionMac:
         [echo] Export the iOS package with Native extension for ApprovalsMobile in Mac
         [java] Exception in thread "main" java.lang.InternalError: Can't connect to window server - not enough permissions.
         [java]  at java.lang.ClassLoader$NativeLibrary.load(Native Method)
         [java]  at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1827)
         [java]  at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1724)
         [java]  at java.lang.Runtime.loadLibrary0(Runtime.java:823)
         [java]  at java.lang.System.loadLibrary(System.java:1045)
         [java]  at sun.security.action.LoadLibraryAction.run(LoadLibraryAction.java:50)
         [java]  at java.security.AccessController.doPrivileged(Native Method)
         [java]  at java.awt.Toolkit.loadLibraries(Toolkit.java:1605)
         [java]  at java.awt.Toolkit.<clinit>(Toolkit.java:1627)
         [java]  at java.awt.Dimension.<clinit>(Dimension.java:70)
         [java]  at com.adobe.air.validator.ApplicationDescriptorValidator.validateImageUri(ApplicationDescri ptorValidator.java:183)
         [java]  at com.adobe.air.validator.ApplicationDescriptorValidator20.validateElement(ApplicationDescr iptorValidator20.java:121)
         [java]  at com.adobe.air.validator.ApplicationDescriptorValidator25.validateElement(ApplicationDescr iptorValidator25.java:65)
         [java]  at com.adobe.air.validator.ApplicationDescriptorValidator26.validateElement(ApplicationDescr iptorValidator26.java:62)
         [java]  at com.adobe.air.validator.ApplicationDescriptorValidator30.validateElement(ApplicationDescr iptorValidator30.java:52)
         [java]  at com.adobe.air.validator.ApplicationDescriptorValidator31.validateElement(ApplicationDescr iptorValidator31.java:46)
         [java]  at com.adobe.air.validator.DescriptorValidator.endElement(DescriptorValidator.java:239)
         [java]  at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.endElement(AbstractSAXParser .java:601)
         [java]  at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanEndElement(XML DocumentFragmentScannerImpl.java:1782)
         [java]  at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$FragmentContentDri ver.next(XMLDocumentFragmentScannerImpl.java:2939)
         [java]  at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(XMLDocumentScannerImp l.java:648)
         [java]  at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.next(XMLNSDocumentScanne rImpl.java:140)
         [java]  at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(XMLDo cumentFragmentScannerImpl.java:511)
         [java]  at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.ja va:808)
         [java]  at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.ja va:737)
         [java]  at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(XMLParser.java:119)
         [java]  at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.parse(AbstractSAXParser.java :1205)
         [java]  at com.sun.org.apache.xerces.internal.jaxp.SAXParserImpl$JAXPSAXParser.parse(SAXParserImpl.j ava:522)
         [java]  at javax.xml.parsers.SAXParser.parse(SAXParser.java:395)
         [java]  at javax.xml.parsers.SAXParser.parse(SAXParser.java:198)
         [java]  at com.adobe.air.Descriptor.validateXML(Descriptor.java:182)
         [java]  at com.adobe.air.Descriptor.<init>(Descriptor.java:56)
         [java]  at com.adobe.air.ApplicationDescriptor.<init>(ApplicationDescriptor.java:84)
         [java]  at com.adobe.air.ApplicationPackager.validateApplicationDescriptor(ApplicationPackager.java: 101)
         [java]  at com.adobe.air.ApplicationPackager.createPackage(ApplicationPackager.java:64)
         [java]  at com.adobe.air.ipa.IPAPackager.createPackage(IPAPackager.java:217)
         [java]  at com.adobe.air.ADT.parseArgsAndGo(ADT.java:557)
         [java]  at com.adobe.air.ADT.run(ADT.java:414)
         [java]  at com.adobe.air.ADT.main(ADT.java:464)
    Thanks,
    Swathi.

    Note: Before the above error that were two other errors .
    1) The build complained that the adt-bundle-linux toolchain could not be found and required that it be added to .mozconfig. This was done.
    2) The build complained that dx could not be found.
    The configure file was edited and the values $DX, $AAPT and $AIDL were all set to the adt-bundle-linux/sdk/build-tools/android-4.4 path.
    The instructions given on the Mozilla Wiki did not work right for Android and several modifications were made to move it along. But this permission error is tough to figure out.

  • FJS-00012  Error when executing script.

    Folks, please i need help, i'm installing sap on oracle 9.2
    SYSID CBT, this is SAP 4.71. It stops on the "creating or registering SAP Services (post processing)" phase, and inside the file  SAPSTARTSRV.EXE.log it's just the word SERVICE NOT STARTED.
    here is the error message
    ==========
    Creating file K:\usr\sap\trans\bin\tpparam_instCBT.
    PHASE 2011-03-14 18:41:36
    Deal with services
    PHASE 2011-03-14 18:41:36
    Prepare dealing with SAP System services
    INFO 2011-03-14 18:41:36
    Creating file S:\SAPinst ORACLE SAPINST\SAPSTARTSRV.EXE.log.
    INFO 2011-03-14 18:41:48
    See 'K:\usr\sap\CBT\SYS\exe\run\SAPSTARTSRV.EXE -r -q -p K:\usr\sap\CBT\SYS\profile\START_DVEBMGS10_SNGCBT1 -s CBT -n 10 -U HCB\SAPServiceCBT -P sap4life -e HCB\cbtadm' output in 'S:\SAPinst ORACLE SAPINST\SAPSTARTSRV.EXE.log'.
    ERROR 2011-03-14 18:41:48
    MOS-01012  PROBLEM: 'K:\usr\sap\CBT\SYS\exe\run\SAPSTARTSRV.EXE -r -q -p K:\usr\sap\CBT\SYS\profile\START_DVEBMGS10_SNGCBT1 -s CBT -n 10 -U HCB\SAPServiceCBT -P sap4life -e HCB\cbtadm' returned with '-1' which is not a defined as a success code.
    ERROR 2011-03-14 18:41:48
    FJS-00012  Error when executing script.
    INFO 2011-03-14 18:42:05
    Creating file S:\SAPinst ORACLE SAPINST\SAPSTARTSRV.EXE.log.
    INFO 2011-03-14 18:42:52
    See 'K:\usr\sap\CBT\SYS\exe\run\SAPSTARTSRV.EXE -r -q -p K:\usr\sap\CBT\SYS\profile\START_DVEBMGS10_SNGCBT1 -s CBT -n 10 -U HCB\SAPServiceCBT -P sap4life -e HCB\cbtadm' output in 'S:\SAPinst ORACLE SAPINST\SAPSTARTSRV.EXE.log'.
    ERROR 2011-03-14 18:42:52
    MOS-01012  PROBLEM: 'K:\usr\sap\CBT\SYS\exe\run\SAPSTARTSRV.EXE -r -q -p K:\usr\sap\CBT\SYS\profile\START_DVEBMGS10_SNGCBT1 -s CBT -n 10 -U HCB\SAPServiceCBT -P sap4life -e HCB\cbtadm' returned with '-1' which is not a defined as a success code.
    ERROR 2011-03-14 18:42:52
    FJS-00012  Error when executing script.
    INFO 2011-03-14 18:48:37
    Creating file S:\SAPinst ORACLE SAPINST\SAPSTARTSRV.EXE.log.
    INFO 2011-03-14 18:48:44
    See 'K:\usr\sap\CBT\SYS\exe\run\SAPSTARTSRV.EXE -r -q -p K:\usr\sap\CBT\SYS\profile\START_DVEBMGS10_SNGCBT1 -s CBT -n 10 -U HCB\SAPServiceCBT -P sap4life -e HCB\cbtadm' output in 'S:\SAPinst ORACLE SAPINST\SAPSTARTSRV.EXE.log'.
    ERROR 2011-03-14 18:48:44
    MOS-01012  PROBLEM: 'K:\usr\sap\CBT\SYS\exe\run\SAPSTARTSRV.EXE -r -q -p K:\usr\sap\CBT\SYS\profile\START_DVEBMGS10_SNGCBT1 -s CBT -n 10 -U HCB\SAPServiceCBT -P sap4life -e HCB\cbtadm' returned with '-1' which is not a defined as a success code.
    ERROR 2011-03-14 18:48:44
    FJS-00012  Error when executing script.
    =============
    what can i do?
    cheers.

    Hi, i installed the vcredist_x86 patch but nothing happened. I'm running a windows 2000 advanced server on a virtual machine with 3 GB of RAM and a lot of space.
    When i tried to start the services manually from service.exe it shows me the on windows eventviewer:
    Initialization failed. Service not started. [ntservmain.cpp 1002]
    and then
    The dynamic link library librfc32.dll could not be loaded
    And here is the message from the sapinst
    ***** Transaction begin ********************************************************
    TRACE
    Processing Row[0] WapsSystemName="CBT" WapsInstanceName="DVEBMGS00" WapsInstanceHost="SNGCBT1" Key="WAPS_SAPsidInstNum_Service" Program="K:\usr\sap\CBT\SYS\exe\run\SAPSTARTSRV.EXE" ProgramArguments="-r -q -p K:\usr\sap\CBT\SYS\profile\START_DVEBMGS00_SNGCBT1 -s CBT -n 00 -U HCB\SAPServiceCBT -P sap4life -e HCB\cbtadm" ArgumentSeparator=" " ProgramReturnCode="255"
    TRACE<i>
    Copying file S:/SAPinst_ORACLE_SAPINST/SAPSTARTSRV.EXE.log to: S:/SAPinst_ORACLE_SAPINST/SAPSTARTSRV.EXE.12.log.
    TRACE<i>
    Creating file S:\SAPinst_ORACLE_SAPINST\SAPSTARTSRV.EXE.12.log.
    TRACE<i>
    Removing file S:/SAPinst_ORACLE_SAPINST/SAPSTARTSRV.EXE.log.
    INFO 2011-03-15 14:47:21
    Creating file S:\SAPinst_ORACLE_SAPINST\SAPSTARTSRV.EXE.log.
    INFO 2011-03-15 14:47:29
    See 'K:\usr\sap\CBT\SYS\exe\run\SAPSTARTSRV.EXE -r -q -p K:\usr\sap\CBT\SYS\profile\START_DVEBMGS00_SNGCBT1 -s CBT -n 00 -U HCB\SAPServiceCBT -P sap4life -e HCB\cbtadm' output in 'S:\SAPinst_ORACLE_SAPINST\SAPSTARTSRV.EXE.log'.
    TRACE
    ProgramReturnCode='-1' means error.
    ERROR 2011-03-15 14:47:29
    MOS-01012  PROBLEM: 'K:\usr\sap\CBT\SYS\exe\run\SAPSTARTSRV.EXE -r -q -p K:\usr\sap\CBT\SYS\profile\START_DVEBMGS00_SNGCBT1 -s CBT -n 00 -U HCB\SAPServiceCBT -P sap4life -e HCB\cbtadm' returned with '-1' which is not a defined as a success code.
    ***** Transaction end **********************************************************
    So Please can someone help me.
    regards

  • Syntax error when running ActionFileToXML.jsx or trying to install xtools

    I have an action set (actually a few) that I would REALLY love to rename but the actions are calling "sub" actions within the action set which means that the action set name is hard-coded into the actions in many places.
    Originally, I tried to edit my actions with a hex editor to try and change the name and references but realised I was limited to renaming with the same number of characters unless I parsed the file first... so I gave up on that. Then I came across Xbytor's awesome ActionFileToXML script, but I get a syntax error when running both the To and From XML scripts at root.@date = Stdlib.toISODateString();
    I then figured I would go straight for the latest xtools instead but when running the install (in CS2) I get a rather long syntax error and so the install fails. The script mentioned that there is a log file that I should email to Xbytor, but I figured I would post here instead of bothering him directly so he has more of a choice about whether he wants to be bothered by me Or maybe someone else can answer if it is a stupid newbie problem.
    Thanks heaps!
    Gab
    ETA: I'm running CS2 on XP if that makes any difference. If so, I may be able to use a friend's Mac with CS3.

    Thanks for the quick (and very useful) response!
    I made the changes to the mentioned files and the scripts were able to
    progress further, but only until the next E4X syntax (node.@key=key;).
    Rather than continue to hack at your code, I figured I should downgrade to a
    previous version (as you also suggested).  I initially tried v1.5 and the
    ActionFileToXML worked perfectly but ActionFileFromXML failed with an
    illegal argument error.
    Before looking too deeply into the error, I figured I would try v1.6 and
    found that both the scripts were able to complete successfully. The
    resulting atn file has a couple of bugs in it (such as "Set current layer"
    having a knockout setting of  which causes the action to crash),
    but nothing that I can't just copy back from my original script.
    Thanks HEAPS for your assistance and for the awesome scripts in the first
    place! Extremely greatly appreciated!

  • Got RMAN error when running RMAN backup of archivelogs on physical standby database

    Got below error when running RMAN backup of datafiles and archivelogs on physical standby database.
    RMAN-06820: WARNING: failed to archive current log at primary database
    ORACLE error from target database:
    ORA-17629: Cannot connect to the remote database server
    ORA-17627: ORA-00942: table or view does not exist
    Could anyone help me? Thanks,

    Hello;
    When you connect RMAN to the source database as TARGET you must specify a password even if RMAN uses operating system authentication.
    So the errors ORA-17627 and ORA-00942 appear to be cause and effect.
    What version of Oracle?  ( 11.2.0.4 according to the tag )
    Can you post your backup script?
    Best Regards
    mseberg
    Update
    According to :
    Database Error Messages 11g Release 2 (11.2) E17766-03
    RMAN-06820: WARNING: failed to archive current log at primary database
    Cause: An attempt to switch the archived log at the primary database failed.
    So I would check my Primary alert log for an issue.
    Message was edited by: mseberg

Maybe you are looking for