How to delete a clip and expand the one beside it?

I'm thinking this is probably very straightforward but I don't know how. I have a section synched to the beat of the music soundtrack. There are several short clips I want to remove and have the clip beside the one to be deleted expand to replace it while maintaining the timing so everything stays in synch (ie delete clip #11 and have clip #12 expand to use the time formerly taken by #11 and #12). I've been doing this by rolling the edit point over the one I want to remove but then there's always one frame remaining which I then have to delete and then expand the remaining clip to compensate. Somewhere I'm sure I read how to do this in a less convoluted way. Can anyone tell me how?

The best solution when you are synching to a music sound track would be to put the music in the primary storyline, so think of doing that in the future.
For the present situation...
It *should* work with the trim tool by rolling the first part of the clip over the second; the problem, as you pointed out, is that the second clip will not be trimmed to zero length: it will leave a single frame.
One way around this involves lifting from the primary storyline:
1) Select the clip you want to extend. Hit Cmd-Option-Up arrow to lift from the primary.
2) Extend the now lifted clip; use the snapping to make it end exactly where it should.
3) Hit Cmd-Option-Down Arrow to overwrite to the primary storyline.

Similar Messages

When I access my google e-mail account on the I-pad my inbox has at least 6 e-mails with no sender and no subject (absent via I-phone, Mac or PC) I cannot delete them as they cannot be selected- how do I stop them and clear the ones there now?

When I access my google e-mail account on the I-pad my inbox has at least 6 e-mails with no sender and no subject (absent via I-phone, Mac or PC) I cannot delete them as they cannot be selected- how do I stop them and clear the ones there now?

Try turning the account off and on : Settings > Mail, Contacts, Calendars , then tap the account on the right, slide Mail to 'off', exit settings and go back into the Mail app, and then go back to Settings and slide Mail back to 'on'
If that doesn't work then try closing the Mail app completely : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
Also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

How do I get picture in picture video + moving animation? + How do edit a clip and store the edit in the library?

How can I have picture in picture video
I want to take one video, make it smaller and then have it play on top of another video
+ How do I control its precise position?
How do I trim and edit a clip and save that clip?
I've been through the manual, I'm sure I read it, but cant remember
How do I have sliding in graphics for me video?
After xx seconds on my video, I wanted a thin strip to slide accross the bottom of the video half way
Then I wanted 4 graphics to slide onto this white line
How do I do this?
Thanks
Omar

For the first question: place one video on top of the other, as a connected clip. Change the size and position as you wish.
You have many questions that suggest you are very unfamiliar with the application. I think you'd be well served by going through a few online tutorials. All the things you ask are easy and fun to do in FCP X. It is best to learn by seeing it done. Look at rippletraining.com, izzyvideo.com, and others. I am sure you'll find that it will be time well spent.

How to delete existing user and create the account

Hi All,
How to delete the existing user and does not loose the shopping cart link, confirmations for etc and then create back the account for the user?
Please tell me the steps.
Thank you.
Regards,
Henry

How to delete the existing user and does not loose the shopping cart link, confirmations for etc and then create back the account for the user?
I believe you can not delete the user 100% fully since all documents must be closed before.since it had a relation in crmd_partner table. However it has links with business objects..
Copied from forum threads.. for your reference..
Note 1148837 - SRM user cannot be deleted
in consulting note 550071
Q8. What happens if I delete the user who has created the shopping cart
A8. If the user is deleted, and the shoping cart exists in the application, then the shooping cart cannot be displayed. If you want to view/ process those shopping carts, then you have to create a dummy user and retrieve the document. In CRMD_PARTNER table, the old user GUID should be replaced with the new user GUID.
User deleted from SRM, deletion of SC not possible
if you have a central recipient cancel them with that role or as advised by akash cancel from r/3.
discussions are welcome..
regards
Muthu

How to delete overwrite clip and bring back original material

First project on any Premiere. Using Windows Premiere Pro CS6.
I have a long (three minute) clip on Video 1 timeline I'll call "Original" with Audio on Audio 1. I'm Overwriting short video clips and placing these short clips onto Video 1.
(I have to place them on Video 1 if I want to use video transitions, right? I'd rather place the short clips onto Video 2 so the Original video would stay underneath)
Anyhow, I've got one of these short clips I want to delete from the Video 1 timeline and end up with the Original clip playing video and audio with no gaps in video or audio and no holes (causing a jump) in the Original clip.
When I choose the Ripple Delete, the short overwrite video clip deletes, and the gap goes away. But I'm left with a jump cut and a "seam" at the cut point!
What can I do to delete the short clip, and bring back the Original overwritten video so that it plays seamlessly with no gap and no jump just as it did before the overwrite?
This is easy and it's just late, right?

(I have to place them on Video 1 if I want to use video transitions, right? I'd rather place the short clips onto Video 2 so the Original video would stay underneath)
If you'd rather put it on video track 2, go ahead, when you add a transition to- or from video2 (on the beginning or end of the desired clip on V2) it will transition to/from video 1.
What can I do to delete the short clip, and bring back the Original overwritten video so that it plays seamlessly with no gap and no jump just as it did before the overwrite?
exactly what Jon said.

IS-Auto Warranty - How to delete a version and check the warranty result.

I need to implement warranty for an OEM. The scenario is that dealers of the OEM should place warranty claims on the web and it should get automatically validated. The requirement is of post-crediting. I want to use vehicle VIN number (Object type VELO) as object for warranty claim. I have created VIN number, subsequently created equipment for this VIN using standard actions, assigned master warranty and measuring point to the VIN.
Now while trying to create warranty claim, I'm facing problem and need few clarifications,
a) Should I maintain the usage of the vehicle in Kilomenters under version specific measuring details or at object level? I need to check warranty of the vehicle.
b) After recording measurement document at object level, I run the action 'S003', but nothing happended. how can I check the status of warranty now? System should update the warranty status automatically but it is not happening. Please guide.
c) How can we set the system so that warranty is checked automatically as soon as the claimant enters the warranty claim. Currently, I have to manually run the action S003.
d) After copying the 'version from claimant' to 'verison to reimburser', If we notice some mistake, can the second verison be deleted? How can we handle this situation?
e) If the dealer wants to mention the part price and the applicable tax in the warranty claim document, where can he enter the tax code/ tax percentage?
Please reply.
Regards
Pulak

Open Launchpad, press Option key and delete the program

How do i delete a part of a clip and rejoin the audio on each side

How (or where in the manual are the instr) l) do i delete a part of a clip and rejoin the audio on each side. This is most frustrating. The join command is never available. If i select an area to delete everything above and below is deleted, whether or not its selected and whether or not its mute. I find in the manual only ways to move entire clips. I need to remove 2 words from a clip in one track.

i'm assuming your working in the multi-track mode since you didn't specify. select the razor blade tool and make two cuts to the audio, one where you want the cut to start, the other where you want the cut to end. select this smaller region that you want to delete and press the delete key.
now you'll have a gap of silence where that unwanted clip was. select the clip(s) to the right of the cut and drag them left. the default behavior is to do a cross fade when the clips overlap. you'll probably have to play with the cross fade amount in order to get it to sound natural.
hope that helps!
scott
PowerMac G5 2.5GHz Mac OS X (10.4.7) MacBook Pro 2.0GHz

I imported an hour of video into iMovie HD and cut it down to a 33 sec clip, and emptied the trash. When I save the project, the file size is 20Gb. How can I save just the 33 sec clip?

I imported an hour of video into iMovie HD and cut it down to a 33 sec clip, and emptied the trash. When I save the project, the file size is 20Gb. How can I save just the 33 sec clip?

Non-destructive editing is an important feature of iMovie HD 6.
iMovie preserves the entire copy of every clip you place into your movie in case you change your mind at a later stage.
So, if you have cut out one minute from a 45 minute clip, iMovie will have stored two complete copies of that clip. This is why is helps to set import as 3-5 minute clips rather than one huge chunk. As DV runs at 13GB per hour your project files can get very big.
One workaround is to complete the editing of a section of the movie, then export that to Quicktime: highlight the clip/s, choose Share-Quicktime, turn on Share selected clips only, and choose Full Quality from the pop-ip menu.
Once you have saved the stand-alone clip to your hard drive, you can re-import it into your project using the File/Import command, and delete the original long clip/s from the project.

How do I make it so that the one computer that has the main itunes account on it be used on other computers, when it comes to backing up phones and not deleting data off of phone that isnt on that computer itunes becasse its all on the one main computer

how do I make it so that the one computer that has the main itunes account on it be used on other computers, when it comes to backing up phones and not deleting data off of phone that isnt on that computer itunes becasse its all on the one main computer. Baiscally the problem is that one comuter and one account has always been sued for eey persons itunes. Now if we want to be able to backup and use itunes on our own computers fro our iphones and such, how will all he data that is on our phones not be deleted once its plugged into a new computer? Also, is theere a way to get all the stuff on thw current itunes onto each computer, via differtn account name?

option discovered in preferences. Really this and any feature that moves deletes or edits a users data should as far as possible be OFF BY DEFAULT. It shouldn't by default and without the users specific say do this dangerous and unnecessary thing without even letting the user know what it's doing!!! And then cause me a few hours (as i'm new to mac) searching for the option so as to switch it off. If i hadn't noticed the status cage declaring that it was copying files then i might never have twigged that this insane thing was occurring. And if i hadn't of noticed i would have been left maintaining the contents of the folder i copied the files to, the folder which as far as i was informed and so believed was also the location of the music files i was playing. How does Apple justify this 'genius' piece of software non-design? Surely it will hurt no one if this was off by default for new users - overall at least i dare say it would cause a lot less distress in the future for the unsuspecting public at large. Thanks for the support.

HT201272 Hello there,I delete my scruff application on the 8/05/13. Receipt N: 184052577343. And I was charged ammount of £ 16.99on the 15/05/13. I t's a Subscription Renewal. How can I stop it and get the refund of this ammount back on my account? Thank

Hello there,I delete my scruff application on the 8/05/13. Receipt N: 184052577343. And I was charged ammount of £ 16.99on the 15/05/13. I t's a Subscription Renewal. How can I stop it and get the refund of this ammount back on my account? Thank you!!

There are instructions on this page for managing and stopping auto-renewing subscriptions (deleting an app won't stop it) : http://support.apple.com/kb/HT4098
In terms of a refund, what does it say on the app's description page in the store (a lot say that refunds aren't given) ? But you can try contacting iTunes Support and see if they will refund or credit you : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

HT1918 i can not change the address from USA to Canada so i live in Canada now How can i do that? or if i can not change How can i delete an account and make the new account by use the same email address?

because i can not use the Canadian card to redeem in my account from USA. should i delete an account and create the new one that should valid in Canada by using the same email address? or what should i do? (i really want to use my recent email)

Hi Kazmania89,
Welcome to the Support Communities!
If you require additional assistance with this, click on the link below for guidance:
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Once you are able to gain access to the old Apple ID, this article may be helpful:
Using your Apple ID for Apple services
http://support.apple.com/kb/HT4895
I have purchased music, apps, or books with multiple Apple IDs. How can I get all of this content onto my iOS device? 
First, you need to copy all of your purchased content so it is on the same Mac or PC with iTunes. This computer should be the one you sync your device with. For more information on how to move your content, see these articles:
Mac: iTunes for Mac: How to copy purchases between computers
PC: iTunes for Windows: How to copy purchases between computers
Next, authorize your computer to play content with each Apple ID in iTunes. Once your computer is authorized for all your content, it can be synced to your iPhone, iPad, or iPod touch.
Cheers,
- Judy

How could we delete transport request and task(the released one)

Hello
We have a released transport task(not request). Transport request is not released.
How could we delete transport request and task(the released one). Namely we would not like to transport it to production

Hi, never delete directly in table.
There are more tables which depends each other...
Here, you can find nice example how to do it: Help on ABAP: Few Tips for Transport Request Manipulation
Using program: RDDIT076 and changing status.

Hi.Have organized all my songs in itunes ,deleted unwanted songs and anupdated the album artwork but it has not changed them in my itunes media folder location in the C drive.How do i change this and back them up now i have everything the way i want it ?

Hi
-I have organized all my songs in iTunes ,deleted unwanted songs and updated the album artwork but it has not changed them in my iTunes media folder location in my C Drive.
How do I update it there so it is the same as my iTunes now so i can back it all up?
Thankyou.

I solved my problem. Here's how:
1. Right click iTunes and click properties from the "Windows 8 Desktop" (or if you want to call it the 7 desktop thats fine too)
2. Select the compatibility tab.
3. Set compatibility mode to Windows 7 and click apply.
4. Open iTunes, sign into iTunes store, Turn on iTunes Match, Add your computer.
5. Close Program
6. Restart Computer

Larry63 Jun 12, 2012 8:54 AM Subject: My IPad (1) keeps showing " user name or password incorrect" .I go to settings and all is okay ,I even deleted email account and reentered the info .How do I correct? iPad I have this question too (0) Categories: Mail

Larry63
Jun 12, 2012 8:54 AM
Subject:
My IPad (1) keeps showing " user name or password incorrect" .I go to settings and all is okay ,I even deleted email account and reentered the info .How do I correct?
iPad
I have this question too (0) Categories: Mail and Address book

Check the outgoing mail server setting. Make sure that your username and password are in there.
Settings>Mail, Contacts, Calendars>Your email account>Account>Outgoing mail server - tap the server name next to SMTP and check in the primary server and make sure your username and password are entered and correct - even if it says that the password is optional.

TS3276 My IPad (1) keeps showing " user name or password incorrect" .I go to settings and all is okay ,I even deleted email account and reentered the info .How do I correct?

Subject:
My IPad (1) keeps showing " user name or password incorrect" .I go to settings and all is okay ,I even deleted email account and reentered the info .How do I correct?

Maybe ask someone in the Apple iPad forum. This is the Snow Leopard forum.

How to delete a clip and expand the one beside it?

Similar Messages

Maybe you are looking for