Error when scheduling the Process Chain

Hi Everybody,
I have created a process chain and executed in background then job in SM37 says it is canceled but when i check the logs in SM37 it gives"ERROR READING JOB LOG" at the status bar. Any suggestions
Thanks
Raju

Dear Raju,
Have you checked SM21? Maybe you have a problem with your TemSe object. If this is the case a basis guy should know how to handle it.
Greetings,
Stefan

Similar Messages

SET CURRENT DEGREE = 1..error when run the process chain..

Hi Experts,
when i run the process chain , i got the following error..
SET CURRENT DEGREE = 1..
what is this error?
Kindly help ..

hi,
As BW reporting queries are often CPU-intensive and geneally executed in parallel.
Parallel processing is activated dynamically in the SAP BW system for every reporting query CURRENT DEGREE = ANY and itsdefault value is 1.
you can limit the maximum number of parallel tasks using ZPARM PARAMDEG(maximum number of parallel tasks ) for the no. of parallel processors for its usuage and this should match no. of processors you can get touch with your basis team
check SAP Note:390016 -DB2/390: BW: Database settings and performance ; in that look at query parallelism it explain about this
hope it helps
regards
laksh

Syntax error when executing a process chain.

Hi gurus,
This is a weird problem that we have been facing since yesterday. In the transaction RSPC, we had created a process chain in Feb 09. It ran smoothly till yesterday. However when I try to schedule the process chain now, it gives me a dump stating Syntax error in program "CL_RSDMD_IOBJ_U_TPL===========CP ".
This same dump is generated whenever I try to display variant of one of the nodes of Process Chain.
I tried checking the corresponding programs but in vain. I have no Idea why am I receiving the error.
If anyone has faced this problem please post the same.
The following is brief overview of the dump.
Information on where terminated Termination occurred in the ABAP program
"CL_RSBK_DTP_DATABASE==========CP" - in "COPY_FROM_DB". The main program was
"RSPC_MAINTAIN ".
In the source code you have the termination point in line 166
of the (Include) program "CL_RSBK_DTP_DATABASE==========CM003".
Any help would be appreciated.
Regards,
Sree.

Hi Rayapa,
There is no Long text as such, however, there is a short text which I have mentioned in my question itself.
And there is a What Happened
which is as follows
Error in the ABAP Application Program
The current ABAP program "CL_RSBK_DTP_DATABASE==========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"CL_RSDMD_IOBJ_U_TPL===========CP " in include
"CL_RSDMD_IOBJ_U_TPL===========CM00E " in
line 4:
"Field "P_BOOKMODE" is unknown. It is neither in one of the specified t"
"ables nor defined by a "DATA" statement. "DATA" statement."
The include has been created and last changed by:
Created by: "SAP"
Last changed by: "<My SAP user>"
Error in the ABAP Application Program
The current ABAP program "CL_RSBK_DTP_DATABASE==========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
thnkz n regards,
Sree.
Edited by: Sree Nair on Apr 3, 2009 12:10 PM

Error message "Error when scheduling the query(JOB_CLOSE)".

Hi all,
While using query extractor (rscrm_bapi) I am getting error message "Error when scheduling the query(JOB_CLOSE)".
Could you please find what this error is?
Thanks,
Uday.

Hi Uday,
This problem can occur if you changed the query definition.
In this case the query definition would be inconsistent with the existing extract structure.
Certain Meta information is maintained with each extract defined using the RSCRM_BAPI. If the definition of the query is changed and you need to use the same extract table then you need to delete the extract using the report RSCRMBW_DEL_ALL_EXTRACTS selecting the extract you want
to delete.
After this you could use the same table name for any further extract that you need to create.
One caution is that the extract table should not be deleted through any other transaction before you run the report.
Rgds,
Colum

Error while running the process chain

Hi, I am getting following error while running the process chain.
"Lock NOT set for: Deleting the data completely from a data target"
Please suggest.
amit

hi,
This is due to a lock on the objects which is being used by ur load.
Even if master data used by this would be in a lock by an attribute change run. wait till that attribute change run finishes and then repeat.
If this target itself is locked by someother process like rollup , compression , this error would appear. In this case also repeat the step after those locking process finish.
some general locks during loading:
Sometimes parallel processing in DTP might lead to this, its better set the DTP and infopackage in serial processing. In this case change the settings and then repeat the process.
There is a specific case in which the Serial DTP gets locked by itself, in this case repeat it untill it succeeds.
You can identify the above scenario as below. This is applicable only if the DTPs processing mode is serial.
if u see in SM 37 this load would have three DTP processes running.
it should have only two.
In this case cancel the process and repeat it untill u get it right.
hope this helps u
regard,
ranjith
Edited by: Ranjith Kumar Murugesan on Sep 12, 2008 10:44 AM
Edited by: Ranjith Kumar Murugesan on Sep 12, 2008 10:46 AM

How to schedule the process chain

hi
guys,
how to schedule the process chain to run on thirsday and friday b/w 8pm to 11:55pm which has already been scheduled for daily loads at 9am to 11am?
(Tell me the answer in detail)
your regards
suresh

Hi Suresh,
If you want to change in the Production system, you may not have the Authorizations. If you have authorization;
1. Goto RSPC-->double click on the Process chain
2. double click on the Start variant of the process chain-->Click on the EDIT button
3. Click on the CHANGE SELECTIONS then click on the DATE/TIME Tab;
4. There pls give from which date this process chain has to run to with your requirement time,
then give the time and select the periodic job and select with your requirement.
Save and exit.
It is done!!
Hope you understood.
Regards,
Ravi Kanth

Warning Error message while scheduling the Process Chain

Dear All,
I have created the meta Chain, which contains 7 Local Chains. I have tested this chain in BI Development and Quality. It was working fine. I have moved this Meta Chain to production. While i am trying to schedule this chain, i got the warning message.
Too many parallel processes for chosen server BICI
Message no. RSPC118
Diagnosis
On the server TVSBICI you have chosen, there are only 0 batch processes available. The process chain has been designed in such as way that 3 processes must be processed parallel.
System Response
Only 0 processes can be processed parallel. Note also that to be able to start sub-chains, AT LEAST TWO free batch processes must be available. Otherwise a lock situation may arise.
For more information, see SAP Note 621400.
Procedure
Reduce the number of parallel processes in the chain or include sub- chains. This warning applies to all relevant processes.
Procedure for System Administration
Increase the number of batch processes available. You should note however that it makes no sense to set up more batch processes than there are CPUs on server BICI.
Pls help on this issue.
Thanks,
Siva.
Edited by: Siva Kumar on Jun 15, 2009 9:16 AM

I have Ignored this warning and now process Chain is working fine.
Thanks,
Siva.

Error while collecting the process chain in a transport request

Hi Gurus,
I am getting an error while collecting my process chain in a tranpsort request.I have to transport the request from DEV to QA system.
When in RSA1--->transport connection i drag & drop the chain from left to right side pane then the Error occurs.
1.Object 'REQUDELZPAK_48RZW8GZX87CNEH7S897TFQSD' (RSPV) of type 'Process Variants' is not available in version 'A'
Sap help given
You wanted to generate an object with the name 'ZPAK_48RZW8GZX87CNEH7S897TFQSD' (in transport request RSPT) of type 'Process Chain Starter' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
2.Object 'ZPAK_48RZW8GZX87CNEH7S897TFQSD' (RSPT) of type 'Process Chain Starter' is not available in version 'A'
Sap help given
You wanted to generate an object with the name 'REQUDEL ZPAK_48RZW8GZX87CNEH7S897TFQSD' (in transport request RSPV) of type 'Process Variants' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
From one of the threads:
(https://forums.sdn.sap.com/click.jspasearchID=10081153&messageID=4623856)
i though it was the problem of patch level sap note(966131).
Accordingly i tried collecting process chain in the request where the patch level is high(24).But same error is seen.
I have activated chain again & then tried collecting the request i the process chain.But did not solve the error.
I have to collect Process chain in a transport request.Can you help me out to solve the problem?
Thanks in advance!
Regards,
Pallavi

Hi,
take a look:
Data Warehousing
"Errors occurred during post-handling RS_AFTER_IMPORT for MPRO L "
Errors occurred during post-handling RS_AFTER_IMPORT for ROUT L
Try to set the Process Chain Start to Immediate(background jobs) in the schedule, because this will trigger the process chain once tranported and may cause similar errors.
Regards
Andreas

Error while executing the Process chain

Hi Friends,
The process chain that I scheduled is getting failed at the Infopackage loading stage.
On checking the diplay message, I found the following log:
Cannot stage requested data for datasource
Error in source system
I activated the datasource in source system, then replicated the same and tried to load data.
But the issue remains the same.
I checked in RSA7. The status corresponding to this datasource is in yellow status.
Can I delete this entry and try again?
Please suggest.
Thanks in advance.
Surjit P

Hi,
/people/mona.kapur/blog/2008/01/14/process-chain-errors
Deadlock
http://help.sap.com/saphelp_nw04s/helpdata/en/2e/44934257a5c86ae10000000a155106/frameset.htm
Dead Locks
2. Error in unit conversion
Units of measure
3.Error 1 in update
When Src file is already open or not accessible.
4.Processing no data
theres no data selected after extraction
5.Caller 70 missing
" This error normally occurs whenever BW encounters error and is not able to classify them. There could be multiple reasons for the same
1) Whenever we are loading the Master Data for the first time, it creates SIDs. If system is unable to create SIDs for the records in the Data packet, we can get this error message.
2) If the Indexes of the cube are not deleted, then it may happen that the system may give the caller 70 error.
3)Whenever we are trying to load the Transactional data which has master data as one of the Characteristics and the value does not exist in Master Data table we get this error. System can have difficultly in creating SIDs for the Master Data and also load the transactional data.
4) If ODS activation is taking place and at the same time there is another ODS activation running parallel then in that case it may happen that the system may classify the error as caller 70. As there were no processes free for that ODS Activation.
5) It also occurs whenever there is a Read/Write occurring in the Active Data Table of ODS. For example if activation is happening for an ODS and at the same time the data loading is also taking place to the same ODS, then system may classify the error as caller 70.
6) It is a system error which can be seen under
the Status tab in the Job Over View.
solution:
" If the Master Data is getting loaded for the first time then in that case we can reduce the Data Package size and load the Info Package. Processing sometimes is based on the size of Data Package. Hence we can reduce the data package size and then reload the data again. We can also try to split the data load into different data loads
If the error occurs in the cube load then we can try to delete the indexes of the cube and then reload the data again.
If we are trying to load the Transactional and Master Data together and this error occurs then we can reduce the size of the Data Package and try reloading, as system may be finding it difficult to create SIDs and load data at the same time. Or we can load the Master Data first and then load Tranactional Data
If the error is happening while ODS activation cause of no processes free, or available for processing the ODS activation, then we can define processes in the T Code RSCUSTA2.
If error is occurring due to Read/Write in ODS then we need to make changes in the schedule time of the data loading.
Once we are sure that the data has not been extracted completely, we can then go ahead and delete the red request from the manage tab in the InfoProvider. Re-trigger the InfoPackage again.
Monitor the load for successful completion, and complete the further loads if any in the Process Chain.
6.Idoc not processed completely.
Here the request remains yellow (in process) and with the same details (as seen in the details tab of the monitor) for an abnormally long time. Many-a-times, the port for communication is not open and re-starting the load helps. For long running jobs, it may not be advisable to restart the extraction
Contact the BASIS administrator to push the IDOC.
look into these links:
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
For common data load errors check this link:
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
Majority of the issues will be based on these things only..
Hope the following links will give u a clear idea about process chains and clear ur doubts.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/sap-teched-03/using%20process%20chains%20in%20sap%20business%20information%20warehouse
Business Intelligence Old Forum (Read Only Archive)
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/c08b3baaa59649e10000000a11402f/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/19683495-0501-0010-4381-b31db6ece1e9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/36693695-0501-0010-698a-a015c6aac9e1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9936e790-0201-0010-f185-89d0377639db
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3507aa90-0201-0010-6891-d7df8c4722f7
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/263de690-0201-0010-bc9f-b65b3e7ba11c
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
Siggi's weblogs for data load error and how to restart process chain
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
Hope this helps.
pls award me some points
thanks.
Thanks

How to schedule the process chain fr the report

hai experts,
i have a query which i need to generate for every five hours? i know that we can generate the report thr process chain but i dont know how to build that..
my question is how to schedule the report,how to build the process chain,....
can any one plz tell me how to start this generating report for every five hours
thanks in advance..points will be alloted surely ,i need this urgently..
Suri

First of all you need to Identify the InfoObjects if you want to take up Master Data Loads, and if you want take up transaction loads then select the Data Targets to which the data has to be updated. Then plan the dataflow accordingly.
You want to create a Process Chain, Go to RSPC, and then select the create option and from the Process categories available on the left handside drag and drop the Start process, then define the Variant for the same. In the same way you need to identify the other Process Types available on the lefthand side. For Eg: Start Process>Load to ODS>Activation of ODS Data>Delete Indexes for the InfoCube>Load to InfoCube>Create Indexes>Delete Overlapping Req-->Agg. Rollup.
This is how you need to specify the dataflow, several other Process Types also included based on the requirement For Eg: Sending Mail Alerts when the Job is Success or Terminated.
Also, have a look at this links to make urself clear about the steps in creating Process Chain.
http://help.sap.com/saphelp_nw04/helpdata/en/67/13843b74f7be0fe10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/sap-teched-03/using%20process%20chains%20in%20sap%20business%20information%20warehouse
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/19683495-0501-0010-4381-b31db6ece1e9
Hope it helps.
Regards,
Archna

Error while designing the Process Chains

Hi All,
I have a issue on Process Chains.
In my Project there are 2 ODS.
ODS 1 : Status Header ODS (ZODS)
ODS 2 : Service Order Header. (0CRM_PROH)
In CRM, if any Service Order is created, it is available in delta Queue(RSA7) immediately.
While loading the data to ODS 2(Service Order),it is checking the data from status ODS 1(Status ODS)
For Example, I am loading the data of service Order 80001 to ODS 2(0CRM_PROH). Before loading to ODS 2, i am checking whether this service Order Number(80001) is available in ODS 1.
If the service Order 80001 is there in ODS 1, it will update the data to ODS 2.
If the service order 80001 is not there in ODS 1, it will not Update the data to ODS 2.
Problem i am facing :
1. First i am loading the data to ODS 1 (Status ODS). Early Morning 2.30AM and it completes the data load at 2.40AM. And document posting is happening on 2.37AM and ODS 1 doesnt pull the data of document posted.
2. Once the ODS 1 is completed, by 2.41AM, the data loading will happen for ODS 2 (Service Order Header).It brings all the data including the document posted on 2.37AM.
3.While loading all the data is available, and while loading to ODS 2, it is checking the status ODS. And it is checking for the document posted on 2.37AM and this document is not there in Status ODS 1 and the data(posted on 2.37AM) will not update in ODS 2.
Because of this, some records are missing in ODS 2. And while loading, we cant stop the document posting also.
How can i achieve this using the process Chain.
Design i have tried in Process Chain :
1. Start Variant.
2. Load Infopackage to PSA only for ODS 2.
3. Load Infopackage to PSA and activate ODS for ODS 1 (Status ODS)
4. Read PSA (of ODS 2) to Load data to ODS 2.
5. Activate the ODS.
I tried, but i got a error message while designing the process Chains.
No type "Activate DataStore Object Data" process can be in front of process "Read PSA and Update Data Target" variable PSA_SERVICE_ORDER in the chain
Pls suggest how to recify this according to my design.
Thanks & Regards,
Ram.

Hi,
You can try this..
.......................................... Start ...................................................
Load data to PSA (ODS 2) ..................................... Load data to PSA (ODS 1)
..................................................................................Load data to ODS 1
...................................................................................Activate ODS 1
........................................... AND ..........................................................
........................................ Load data to ODS 2 .............................................
.......................................... Activate ODS 2 ...........................................
Regards,
Anup.
Edited by: Anup ShankarBS on Sep 3, 2009 4:56 PM

Error while designing the process Chain.

Hi All,
I have created the Process Chain.
1. Start Variant.
2. Load data to PSA for ODS 1.
3. Load data to ODS 2
4. Activate the ODS 2
5. Read PSA and load data target to ODS 1.
6. Activate the ODS 1.
While checking the process Chain, i am getting the error message as
"No Type "Activate Datastore Object data" process can be in front of process "Read PSA and data target" Variable PSA_CONFIRM_ITEM in the chain.
Can u pls help on this issue.
Thanks,
Jelina.

Hi,
You can try this..
..................................................... Start ...................................................
Load data to PSA for ODS 1 ..................................Load data to ODS 2
...................................................................................Activate ODS 2
.............................................. AND ..........................................................
........................ Read PSA and load data To ODS 1 .............................................
.......................................... Activate ODS 1 ............................................
Regards,
Anup.
Edited by: Anup ShankarBS on Sep 4, 2009 10:47 AM

Schedule the Process Chain automatically in BW

Hi SDN Guru's,
I have an urgent requirement in BW. I want to run the Process Chain automatically in BW when the job for the deltas in R/3 are completed.
I know that in BW we can trigger the process chain by the background job only by giving the date and time or after the event and after the job.
But my requirement is the process chain should automatically be triggered in BW once the R/3 delta job is run and completed and the delta records are updated in RSA7.
Can any body please let me know how we can do this as this is the urgent requirement for me.
Please let me know how and where we need to write the code or make the settings for satisfying my requirement.
Thanks & Regards,
Vamshi Krishna.

HI Vamshi:
Take a look at note 409239.
Thanks for any points you choose to assign (points are the way of saying "thanks" in SDN)
Best Regards -
Ron Silberstein
SAP

User wants to schedule the process chain - what is the best practice

I posted earler and got the anwser.
Create a custom ABAP program that calls the RSPC_API_CHAIN_START Function Module, with a selection for the Process Chain where your user can enter the Meta Chain name to start the process.
To make it simpler for the user to execute this, create a custom tcode for them in SE93, so that they logon to your BW environment, call up that tcode, enter the Meta Chain name and execute. With this, they wouldn't have to have access to RSPC.
I did the above and the user not able to execute it since he doesn't have access to the cube/dso to update the cube.
To overcome this I wrote another abap program and used the
SUBMIt program user ALEREMOTE
and there is a problem.I called the process chain start program using ALEREMOTE .
Now the user needs access to authorization object S_BTCH_NAM and authorization field BTCUNAME with value ALEREMOTE.
So again due to SOX the basis doesn't want to give the necessary access.
What is the best solution.
How in general if the user needs to execute the process chain how they do it.
Please let me know. Thanks for your help in advance.
Senthil

Hi Senthil
In general production scenerio, we do not run process chain manually. To execute a process chain you should have necessary authorization. As you have assigned alertmote in the start variant, any user other thatn that will not be able to trigger the same.
Instead of alertmote , use the nornal start variant to trigger the process chain and give the user the normal authorization. Whenever user wants to run the infopackage manually or via process chain they should have the auth to view the infoprovider content as well....

Error when scheduling the infopackage for loading Master data attributes

Hi,
Iam getting the following error message when scheduling this Master data Attributes ZIP_0PLANT_ATTR_FULL..( Flexible update of Master data info objects)..
In Data load monitor error i got this following error message.
Error message when processing in the Business Warehouse
Diagnosis
An error occurred in the SAP BW when processing the data. The error is documented in an error message.
System response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Update rules
Thanks

HI,
A caller 01, 02 or equal to or greater than 20 contains an error meesage This is an Idoc error. Please check the Idocs :
1) SM37 job log (In source system if load is from R/3 or in BW if its a datamart load) (give request name) and it should give you the details about the request. If its active make sure that the job log is getting updated at frequent intervals.
Also see if there is any 'sysfail' for any datapacket in SM37.
2) SM66 get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. (In source system if load is from R/3 or in BW if its a datamart load). See if its accessing/updating some tables or is not doing anything at all.
3) RSMO see what is available in details tab. It may be in update rules.
4) ST22 check if any short dump has occured.(In source system if load is from R/3 or in BW if its a datamart load)
5) Check in SM58 and BD87 for pending tRFCs and IDOCS.
Once you identify you can rectify the error.
If all the records are in PSA you can pull it from the PSA to target. Else you may have to pull it again from source infoprovider.
If its running and if you are able to see it active in SM66 you can wait for some time to let it finish. You can also try SM50 / SM51 to see what is happening in the system level like reading/inserting tables etc.
If you feel its active and running you can verify by checking if the number of records has increased in the data tables.
SM21 - System log can also be helpful.
Thanks,....
Shambhu

Error when scheduling the Process Chain

Similar Messages

Maybe you are looking for