Error when sending PO output to email

Hi every body,
IF I send the PO output to an email through
ME22n->messages:by giving output type dispatch time,communication strategy..And saving that document it showing <b>Green</b> status.
If I check the for that PO message status in SCOT,
it is giving error msg like
<b>"Message could not send due to RFC error"</b>
can any body tell me what kind of problem it is ?
and how to rectify this?
Thanks in advance.

Check with your basis folks if internet node is correctly setup in SCOT.
Try sending an internet mail from sap office ( Transaction SBWP ) . If this does not go then problem not with PO program but with internet node setup and you will have to ask basis folks to setup this correctly before you can send mails.
Cheers.
Sanjay

Similar Messages

Error when sending report output to printer from Forms 10g

Hi,
I have a simple report that I am running from a form using run_report_object built-in. I can successfully send the report output to a file but when I send the report output to a printer my report is
terminated with report status of 'TERMINATED_WITH_ERROR'. I am using the default forms service and reports server that comes with the forms builder. How do I specify the reports server to user my default network printer ?Following is the code that runs my report.
Thanks,
Anna
PROCEDURE SEND_TO_PRINTER IS
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(50);
rep_server system_variables.reports_server%type;
alldone          exception;
BEGIN
     select reports_server
     into rep_server
     from system_variables;
     if rep_server is null then
          msg_alert('Error getting the reports server name', 'I', FALSE);
          raise alldone;
     end if;
     :ctrl.run_report_errors := 'N';
     repid := find_report_object('REP_OBJ1');
     SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,rep_server);
     SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,BATCH);
     SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
     IF :ctrl.rg_print = 'P' THEN
          --Send the output to printer.
          SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,PRINTER);
          SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'dflt');
     ELSIF :ctrl.rg_print = 'R' THEN
          --Rich Text Format
          SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,FILE);
          SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'rtf');
          SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESNAME,:ctrl.filename);
     END IF;
     v_rep := RUN_REPORT_OBJECT(repid);
     rep_status := REPORT_OBJECT_STATUS(v_rep);
     WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
     LOOP
          rep_status := report_object_status(v_rep);
     END LOOP;
     IF rep_status = 'FINISHED' THEN
          null;
     ELSE
          :ctrl.run_report_errors := 'Y';
          msg_alert('Error when running report.' || rep_status, 'I', FALSE);
     END IF;
EXCEPTION
     when no_data_found then
          msg_alert('Error getting the reports server name', 'I', FALSE);
     when alldone then
          null;
END;

If you use Windows the user that runs the reports server is usually LocalSystem. Check this in the Windows Services panel.
LocalSystem has no printer access. To be able to print, you have to use a real domain user that has access to the printer. So, change the Log on properties in the Services panel.

ERROR WHEN SENDING EMAIL (REPORTS)

Hi all,
Sorry to write about Reports here, but the Reports Forum is slow today, nobody answers the questions... if anyone here could help me i would thank a lot.
I am trying to send the report by email, i already modified the file rwbuider.config, but i am getting the following error:
REP-0069: Internal Error.
REP-57054: In-Process job terminated: Executed successfully but there were some errors when distribute the output.
REP-50159: Executed successfully but there were some errors when distribute the output.
I am using Reports 10g.
Any help??

hii avinash,
Please check that the IP Address of your SAP system is populated on the Relay Agent of your SMTP Server
Check also in transaction SMICM, if SMTP is activated.
regards,
Shweta
Edited by: Shweta Joon on Aug 24, 2009 10:09 AM

ERROR WHEN SENDING EMAIL

Hi all,
I am trying to send the report by email, i already modified the file rwbuider.config, but i am getting the following error:
REP-0069: Internal Error.
REP-57054: In-Process job terminated: Executed successfully but there were some errors when distribute the output.
REP-50159: Executed successfully but there were some errors when distribute the output.
I am using Reports 10g
Any help??

Hello,
The best way to "diagnose" this error is to activate the trace :
http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b14048/pbr_tune.htm#i1006821
The trace file will contain more details about the error .
Regards

Reg : Sending Script output to email

Hi,
I need to send script output to email.I have written the code for this functionality.
Functional guy has created output type ,but that output type is red in clor and when I click process log " it says Parameter DEVICE= is invalid "
Is there anything to be done from abap point for this error.
Actually I used these 2 fun.modules
DATA: LVF_DEVICE LIKE ITCPP-TDDEVICE.
DATA: LVS_ITCPO TYPE ITCPO,
LVF_DIALOG(1) TYPE C VALUE ' ',
LVS_RECIPIENT LIKE SWOTOBJID,
LVS_SENDER LIKE SWOTOBJID,
LVS_SNAST TYPE SNAST,
LVF_PROGRAM LIKE SY-REPID,
LVS_COMM_TYPE TYPE AD_COMM,
LVS_COMM_VALUES TYPE SZADR_COMM_VALUES.
DATA:
W_DEPT LIKE KNVK-ABTNR, "Department
W_PRSNR LIKE KNVK-PRSNR. "Person number
reset return code
RETCODE = 0.
IF NOT NAST-TCODE IS INITIAL AND NAST-NACHA EQ '5'.
SELECT SINGLE * FROM USR21 WHERE BNAME = SY-UNAME.
CALL FUNCTION 'ADDR_GET_NEXT_COMM_TYPE'
EXPORTING
strategy = nast-tcode
address_number = Kna1-adrnr
IMPORTING
comm_type = lvs_comm_type
comm_values = lvs_comm_values
TABLES
STRATEGY_TABLE =
EXCEPTIONS
address_not_exist = 1
person_not_exist = 2
no_comm_type_found = 3
internal_error = 4
parameter_error = 5
OTHERS = 6.
convert communication data
Always INT
LVS_COMM_TYPE = 'INT'.
clear LVS_COMM_VALUES-ADSMTP-SMTP_ADDR.
Get Contact persons number from KNVK
SELECT SINGLE * FROM KNVK WHERE KUNNR EQ NAST-PARNR
AND ABTNR EQ W_DEPT.
Get it from ADR6 table always
Select single * from adr6 where addrnumber = kna1-adrnr
AND PERSNUMBER = KNVK-PRSNR.
IF SY-SUBRC EQ 0 AND adr6-Smtp_addr NE ' '.
LVS_COMM_VALUES-ADSMTP-SMTP_ADDR = adr6-Smtp_addr.
ENDIF.
ENDIF.
MOVE-CORRESPONDING nast TO LVS_SNAST .
MOVE sy-repid TO LVF_PROGRAM.
CALL FUNCTION 'CONVERT_COMM_TYPE_DATA'
EXPORTING
pi_comm_type = lvs_comm_type
pi_comm_values = lvs_comm_values
pi_country = kna1-land1
pi_repid = LVF_PROGRAM
pi_snast = LVS_SNAST
IMPORTING
pe_itcpo = lvs_itcpo
pe_device = lvf_device
pe_mail_recipient = lvs_recipient
pe_mail_sender = lvs_sender
EXCEPTIONS
comm_type_not_supported = 1
recipient_creation_failed = 2
sender_creation_failed = 3
OTHERS = 4.
fill structure itcpo
ITCPO = LVS_ITCPO.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
APPLICATION = 'TX'
ARCHIVE_INDEX = TOA_DARA
ARCHIVE_PARAMS = ARC_PARAMS
DEVICE = LVF_DEVICE
DIALOG = ' '
FORM = TNAPR-FONAM
LANGUAGE = NAST-SPRAS
OPTIONS = LVS_ITCPO
MAIL_SENDER = LVS_SENDER
MAIL_RECIPIENT = LVS_RECIPIENT
MAIL_APPL_OBJECT = ' '
RAW_DATA_INTERFACE = '*'
IMPORTING
LANGUAGE =
NEW_ARCHIVE_PARAMS =
RESULT =
EXCEPTIONS
CANCELED = 1
DEVICE = 2
FORM = 3
OPTIONS = 4
UNCLOSED = 5
MAIL_OPTIONS = 6
ARCHIVE_ERROR = 7
OTHERS = 8.
IF SY-SUBRC NE 0.
CASE SY-SUBRC.
WHEN 7.
RETCODE = SY-SUBRC.
SYST-MSGID = 'VN'.
SYST-MSGNO = '096'.
SYST-MSGTY = 'E'.
SYST-MSGV1 = NAST-KSCHL.
SYST-MSGV2 = NAST-KAPPL.
PERFORM PROTOCOL_UPDATE.
WHEN OTHERS.
RETCODE = SY-SUBRC.
PERFORM PROTOCOL_UPDATE.
ENDCASE.
ENDIF.
and one more query is :
I want to know weather
"Are there any settings need to be done by BASIS people."
If Anyone has any idea plz reply.

Hi
Use the below peace of code,I was used to send sales order confirmation script output as email.
Change History
Programmer   Date     Change Request Description
FKHURRAM     9/16/02 DU1K920151     Upgrade changes.
                                     Use ADRC for Address Data
             Print of an order confirmation by SAPscript
REPORT rvador01 LINE-COUNT 100 MESSAGE-ID vn.
TABLES: komk,                          "Communicationarea for conditions
        komp,                          "Communicationarea for conditions
        komvd,                         "Communicationarea for conditions
        vbco3,                         "Communicationarea for view
        vbdka,                         "Headerview
        vbdpa,                         "Itemview
        vbdpau,                        "Subitemnumbers
        conf_out,                      "Configuration data
        sadr,                          "Addresses
        tvag,                          "Reason for rejection
        vedka,                         "Servicecontract head data
        vedpa,                         "Servicecontract position data
        vedkn,                         "Servicecontract head notice data
        vedpn,                         "Servicecontract pos. notice data
        vbpa,                          "Sales Document: Partner
        kna1,                          "General Data in Customer Master
        riserls,                       "Serialnumbers
        komser,                        "Serialnumbers for print
        tvbur,                         "Sales office
        tvko,                          "Sales organisation
        adrs,                          "Communicationarea for Address
        fpltdr.                        "billing schedules
INCLUDE yzrvadtabl.
*INCLUDE RVADTABL.
INCLUDE yzrvdirekt.
*INCLUDE RVDIREKT.
INCLUDE yzvedadata.
*INCLUDE VEDADATA.
DATA: retcode   LIKE sy-subrc.         "Returncode
DATA: repeat(1) TYPE c.
DATA: xscreen(1) TYPE c.               "Output on printer or screen
DATA: BEGIN OF steu,                   "Controldata for output
        vdkex(1) TYPE c,
        vdpex(1) TYPE c,
        kbkex(1) TYPE c,
        kbpex(1) TYPE c,
      END OF steu.
DATA: BEGIN OF tvbdpa OCCURS 0.        "Internal table for items
        INCLUDE STRUCTURE vbdpa.
DATA: END OF tvbdpa.
DATA: BEGIN OF tkomv OCCURS 50.
        INCLUDE STRUCTURE komv.
DATA: END OF tkomv.
DATA: BEGIN OF tkomvd OCCURS 50.
        INCLUDE STRUCTURE komvd.
DATA: END OF tkomvd.
DATA: BEGIN OF tvbdpau OCCURS 5.
        INCLUDE STRUCTURE vbdpau.
DATA: END   OF tvbdpau.
DATA: BEGIN OF tkomcon OCCURS 50.
        INCLUDE STRUCTURE conf_out.
DATA: END   OF tkomcon.
DATA: BEGIN OF tkomservh OCCURS 1.
        INCLUDE STRUCTURE vedka.
DATA: END   OF tkomservh.
DATA: BEGIN OF tkomservp OCCURS 5.
        INCLUDE STRUCTURE vedpa.
DATA: END   OF tkomservp.
DATA: BEGIN OF tkomservhn OCCURS 5.
        INCLUDE STRUCTURE vedkn.
DATA: END   OF tkomservhn.
DATA: BEGIN OF tkomservpn OCCURS 5.
        INCLUDE STRUCTURE vedpn.
DATA: END   OF tkomservpn.
DATA: BEGIN OF tkomser OCCURS 5.
        INCLUDE STRUCTURE riserls.
DATA: END   OF tkomser.
DATA: BEGIN OF tkomser_print OCCURS 5.
        INCLUDE STRUCTURE komser.
DATA: END   OF tkomser_print.
DATA: BEGIN OF tfpltdr OCCURS 5.
        INCLUDE STRUCTURE fpltdr.
DATA: END   OF tfpltdr.
DATA: pr_kappl(01)   TYPE c VALUE 'V'. "Application for pricing
DATA: BEGIN OF char_val OCCURS 0,
        atnam LIKE cabn-atnam,
        atwrt LIKE ausp-atwrt,
      END OF char_val.
FORM entry USING return_code us_screen.
CLEAR retcode.
xscreen = us_screen.
PERFORM processing.
IF retcode NE 0.
    return_code = 1.
ELSE.
    return_code = 0.
ENDIF.
ENDFORM.                    "ENTRY
      FORM PROCESSING                                               *
FORM processing.
PERFORM get_data.
CHECK retcode = 0.
PERFORM form_open USING xscreen vbdka-land1.
CHECK retcode = 0.
PERFORM logo_selection.
PERFORM form_title_print.
CHECK retcode = 0.
PERFORM write_header_info.
PERFORM validity_print.
CHECK retcode = 0.
PERFORM header_data_print.
CHECK retcode = 0.
PERFORM header_serv_print.
CHECK retcode = 0.
PERFORM header_notice_print.
CHECK retcode = 0.
PERFORM header_inter_print.
CHECK retcode = 0.
PERFORM header_text_print.
CHECK retcode = 0.
PERFORM item_print.
CHECK retcode = 0.
PERFORM end_print.
CHECK retcode = 0.
PERFORM form_close.
CHECK retcode = 0.
*********************changes on 12/04/2007****************
TABLES: tsp01.
TYPES: BEGIN OF t_spool,
         rqident TYPE tsp01-rqident,
        END OF t_spool.
DATA: i_spool TYPE STANDARD TABLE OF t_spool,
        wa_spool TYPE t_spool.
SELECT rqident FROM tsp01
INTO TABLE i_spool
WHERE rqowner = sy-uname.
SORT i_spool DESCENDING BY rqident.
LOOP AT i_spool INTO wa_spool.
ENDLOOP.
data: l_rqident type tsp01-rqident.
SELECT SINGLE rqident FROM tsp01 INTO l_rqident
WHERE rqowner = sy-uname.
DATA: l_spoolno LIKE tsp01-rqident VALUE '0000024884'.
TYPES: l_ty_tab_pdf TYPE tline OCCURS 0.
DATA: l_pdf TYPE l_ty_tab_pdf,
        l_spool TYPE tsp01-rqident.
Type for binary attachment table.
TYPES: l_ty_tab_objbin TYPE solisti1 OCCURS 0.
DATA: l_objbin TYPE l_ty_tab_objbin.
l_spool = l_spoolno.
l_spool = l_rqident.
l_spool = wa_spool-rqident.
**/ Call the standard function
CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'             "#EC ARGCHECKED
      EXPORTING
        src_spoolid                    = l_spool
        no_dialog                      = ' '
      DST_DEVICE                     =
      PDF_DESTINATION                =
     IMPORTING
       pdf_bytecount                  = numbytes
       pdf_spoolid                    = pdfspoolid
      LIST_PAGECOUNT                 =
       btc_jobname                    = jobname
       btc_jobcount                   = jobcount
      TABLES
        pdf                            = l_pdf
      EXCEPTIONS
        err_no_abap_spooljob           = 1
        err_no_spooljob                = 2
        err_no_permission              = 3
        err_conv_not_possible          = 4
        err_bad_destdevice             = 5
        user_cancelled                 = 6
        err_spoolerror                 = 7
        err_temseerror                 = 8
        err_btcjob_open_failed         = 9
        err_btcjob_submit_failed       = 10
        err_btcjob_close_failed        = 11
        OTHERS                         = 12.
IF sy-subrc <> 0.
    WRITE: / 'error', sy-subrc.
ENDIF.
**/ Convert the PDF format to the table type required for the
*attachment.
CALL FUNCTION 'QCE1_CONVERT'
    TABLES
      t_source_tab         = l_pdf
      t_target_tab         = l_objbin
    EXCEPTIONS
      convert_not_possible = 1
      OTHERS               = 2.
IF sy-subrc <> 0.
    WRITE: / 'error', sy-subrc.
ENDIF.
TABLES : soli.
TABLES : zpsdsalrep.
DATA: v_email TYPE soli-line.
DATA: v_email1 TYPE soli-line.
DATA: l_adrnr LIKE kna1-adrnr.
DATA: l_objky TYPE nast-objky.
DATA: l_zzterrmg TYPE zpsdsalrep-zzterrmg.
DATA: l_zsupervisor TYPE zpsdsalrep-zsupervisor.
DATA: l_kunnr TYPE kna1-kunnr.
DATA: l_kunnr1 TYPE vbak-kunnr.
SELECT SINGLE kunnr FROM vbak INTO l_kunnr1
         WHERE vbeln = nast-objky.
SELECT SINGLE adrnr FROM kna1 INTO l_adrnr
         WHERE kunnr = l_kunnr1.
CHECK sy-subrc IS INITIAL.
SELECT SINGLE smtp_addr FROM adr6 INTO v_email
         WHERE addrnumber = l_adrnr.
SELECT SINGLE zzterrmg FROM zpsdsalrep INTO l_zzterrmg
         WHERE zzsalesrep = l_kunnr1.
SELECT SINGLE zsupervisor FROM zpsdsalrep INTO l_zsupervisor
      WHERE zzterrmg = l_zzterrmg.
SELECT SINGLE kunnr FROM kna1 INTO l_kunnr
        WHERE sortl = l_zsupervisor.
SELECT SINGLE adrnr FROM kna1 INTO l_adrnr
         WHERE kunnr = l_kunnr.
CHECK sy-subrc IS INITIAL.
SELECT SINGLE smtp_addr FROM adr6 INTO v_email1
         WHERE addrnumber = l_adrnr.
DATA: l_reclist LIKE somlreci1 OCCURS 0 WITH HEADER LINE.
DATA: l_objtxt    LIKE solisti1 OCCURS   0 WITH HEADER LINE.
DATA: l_objpack   LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE.
DATA: l_doc_chng LIKE sodocchgi1.
DATA: l_objhead   LIKE solisti1 OCCURS   0 WITH HEADER LINE.
DATA: l_tab_lines LIKE sy-tabix.
CONSTANTS: k_true TYPE boolean_flg VALUE 'X'.
DATA: l_mail TYPE somlreci1-receiver.
DATA: l_mail1 TYPE somlreci1-receiver.
DATA: k_mail2 TYPE somlreci1-receiver.
DATA: k_mail TYPE somlreci1-receiver.
l_mail = v_email.
l_mail1 = v_email1.
k_mail2 = text-006.
k_mail = text-007.
Creation of the document to be sent
File Name
l_doc_chng-obj_name = 'SENDFILE'.
Mail Subject
l_doc_chng-obj_descr = text-001.
Completing the recipient list
l_reclist-receiver = l_mail.
l_reclist-rec_type = 'U'.
APPEND l_reclist.
l_reclist-receiver = l_mail1.
l_reclist-rec_type = 'U'.
APPEND l_reclist.
l_reclist-receiver = k_mail.
l_reclist-rec_type = 'U'.
APPEND l_reclist.
l_reclist-receiver = k_mail2.
l_reclist-rec_type = 'U'.
APPEND l_reclist.
Mail Contents
l_objtxt = text-002.
APPEND l_objtxt.
CLEAR l_objtxt.     " put in a blank line
APPEND l_objtxt.
l_objtxt = text-003.
APPEND l_objtxt.
l_objtxt = text-004 .
APPEND l_objtxt.
Calculate email size in bytes
DESCRIBE TABLE l_objtxt LINES l_tab_lines.
READ TABLE l_objtxt INDEX l_tab_lines.
l_doc_chng-doc_size = ( l_tab_lines - 1 ) * 255 + STRLEN( l_objtxt ).
Creation of the entry for the compressed document
for the email text
CLEAR l_objpack-transf_bin.
l_objpack-head_start = 1.
l_objpack-head_num = 0.
l_objpack-body_start = 1.
l_objpack-body_num = l_tab_lines.
l_objpack-doc_type = 'RAW'.
APPEND l_objpack.
Creation of the document attachment
(Assume that the data in OBJBIN is in BMP format)
DESCRIBE TABLE l_objbin LINES l_tab_lines.
l_objhead = text-001 .
APPEND l_objhead.
CLEAR l_objpack.
**/ Creation of the entry for the compressed/attached document
l_objpack-transf_bin = k_true.
l_objpack-head_start = 1.
l_objpack-head_num = 1.
l_objpack-body_start = 1.
l_objpack-body_num = l_tab_lines.
l_objpack-doc_type = 'PDF'.
l_objpack-obj_name = text-005.
l_objpack-obj_descr = text-001.
l_objpack-doc_size = l_tab_lines * 255.
APPEND l_objpack. "/ .
Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1' "/ .
    EXPORTING
      document_data              = l_doc_chng
      put_in_outbox              = 'X'
    TABLES
      packing_list               = l_objpack
      object_header              = l_objhead
      contents_bin               = l_objbin
      contents_txt               = l_objtxt
      receivers                  = l_reclist
    EXCEPTIONS
      too_many_receivers         = 1
      document_not_sent          = 2
      operation_no_authorization = 4
      OTHERS                     = 99.
IF sy-subrc <> 0.
    WRITE: / 'unsuccessful', sy-subrc.
ELSE.
    WRITE: / 'successful'.
ENDIF.
**/Take_note it is a requirement to do a commit work for the
email to go into transaction SOST.
COMMIT WORK.   "/Take_note .
ENDFORM.                    "PROCESSING
      S U B R O U T I N E S                                         *
      FORM ALTERNATIVE_ITEM                                         *
      A text is printed, if the item is an alternative item.        *
FORM alternative_item.
CHECK vbdpa-grpos CN '0'.
CALL FUNCTION 'WRITE_FORM'
    EXPORTING
      element = 'ALTERNATIVE_ITEM'
    EXCEPTIONS
      element = 1
      window = 2.
IF sy-subrc NE 0.
    PERFORM protocol_update.
ENDIF.
ENDFORM.                    "ALTERNATIVE_ITEM
      FORM CHECK_REPEAT                                             *
      A text is printed, if it is a repeat print for the document. *
FORM check_repeat.
CLEAR repeat.
SELECT * INTO *nast FROM nast WHERE kappl = nast-kappl
                                AND   objky = nast-objky
                                AND   kschl = nast-kschl
                                AND   spras = nast-spras
                                AND   parnr = nast-parnr
                                AND   parvw = nast-parvw
                                AND   nacha BETWEEN '1' AND '4'.
    CHECK *nast-vstat = '1'.
    repeat = 'X'.
    EXIT.
ENDSELECT.
ENDFORM.                    "CHECK_REPEAT
      FORM DELIVERY_DATE                                            *
      If the delivery date in the item is different to the header   *
      date and there are no scheduled quantities, the delivery date *
      is printed in the item block.                                 *
FORM delivery_date.
IF vbdka-lfdat = space AND
     vbdpa-lfdat NE space AND
     vbdpa-etenr_da = space.
    CALL FUNCTION 'WRITE_FORM'
      EXPORTING
        element = 'ITEM_DELIVERY_DATE'
      EXCEPTIONS
        element = 1
        window = 2.
    IF sy-subrc NE 0.
      PERFORM protocol_update.
    ENDIF.
ENDIF.
ENDFORM.                    "DELIVERY_DATE
      FORM DIFFERENT_CONSIGNEE                                      *
      If the consignee in the item is different to the header con- *
      signee, it is printed by this routine.                        *
FORM different_consignee.
CHECK vbdka-name1_we NE vbdpa-name1_we
    OR vbdka-name2_we NE vbdpa-name2_we
    OR vbdka-name3_we NE vbdpa-name3_we
    OR vbdka-name4_we NE vbdpa-name4_we.
CHECK vbdpa-name1_we NE space
    OR vbdpa-name2_we NE space
    OR vbdpa-name3_we NE space
    OR vbdpa-name4_we NE space.
CALL FUNCTION 'WRITE_FORM'
    EXPORTING
      element = 'ITEM_CONSIGNEE'
    EXCEPTIONS
      element = 1
      window = 2.
IF sy-subrc NE 0.
    PERFORM protocol_update.
ENDIF.
ENDFORM.                    "DIFFERENT_CONSIGNEE
      FORM DIFFERENT_REFERENCE_NO                                   *
      If the reference number in the item is different to the header*
      reference number, it is printed by this routine.              *
FORM different_reference_no.
CHECK vbdpa-vbeln_vang NE vbdka-vbeln_vang
    OR vbdpa-vbtyp_vang NE vbdka-vbtyp_vang.
CALL FUNCTION 'WRITE_FORM'
    EXPORTING
      element = 'ITEM_REFERENCE_NO'
    EXCEPTIONS
      element = 1
      window = 2.
IF sy-subrc NE 0.
    PERFORM protocol_update.
ENDIF.
ENDFORM.                    "DIFFERENT_REFERENCE_NO
      FORM DIFFERENT_TERMS                                          *
      If the terms in the item are different to the header terms,   *
      they are printed by this routine.                             *
FORM different_terms.
DATA: us_vposn   LIKE vedpa-vposn.
DATA: us_text(1) TYPE c.             "Flag for Noticetext was printed
IF vbdpa-zterm NE vbdka-zterm AND
     vbdpa-zterm NE space.
    CALL FUNCTION 'WRITE_FORM'
      EXPORTING
        element = 'ITEM_TERMS_OF_PAYMENT'
      EXCEPTIONS
        element = 1
        window = 2.
    IF sy-subrc NE 0.
      PERFORM protocol_update.
    ENDIF.
ENDIF.
IF vbdpa-inco1 NE space.
    IF vbdpa-inco1 NE vbdka-inco1 OR
       vbdpa-inco2 NE vbdka-inco2.
      CALL FUNCTION 'WRITE_FORM'
        EXPORTING
          element = 'ITEM_TERMS_OF_DELIVERY'
        EXCEPTIONS
          element = 1
          window = 2.
      IF sy-subrc NE 0.
        PERFORM protocol_update.
      ENDIF.
    ENDIF.
ENDIF.
Print different validity-data for the position
READ TABLE tkomservp WITH KEY vbdpa-posnr.
IF sy-subrc EQ 0.
    vedpa = tkomservp.
    IF vedpa-vbegdat NE space       AND
       vedpa-venddat NE space       AND
       NOT vedpa-vbegdat IS INITIAL AND
       NOT vedpa-venddat IS INITIAL.
      CALL FUNCTION 'WRITE_FORM'
        EXPORTING
          element = 'ITEM_TERMS_OF_SERV1'
        EXCEPTIONS
          element = 1
          window = 2.
      IF sy-subrc NE 0.
        PERFORM protocol_update.
      ENDIF.
    ELSEIF vedpa-vbegdat NE space AND
           NOT vedpa-vbegdat IS INITIAL.
      CALL FUNCTION 'WRITE_FORM'
        EXPORTING
          element = 'ITEM_TERMS_OF_SERV2'
        EXCEPTIONS
          element = 1
          window = 2.
      IF sy-subrc NE 0.
        PERFORM protocol_update.
      ENDIF.
    ELSE.
      CALL FUNCTION 'WRITE_FORM'
        EXPORTING
          element = 'ITEM_TERMS_OF_SERV3'
        EXCEPTIONS
          element = 1
          window = 2.
      IF sy-subrc NE 0.
        PERFORM protocol_update.
      ENDIF.
    ENDIF.
ENDIF.
Notice-rules for the positions.
MOVE vbdpa-posnr TO us_vposn.
CLEAR us_text.
LOOP AT tkomservpn WHERE vposn = us_vposn.
    vedpn = tkomservpn.
    IF us_text IS INITIAL.
      CALL FUNCTION 'WRITE_FORM'
        EXPORTING
          element = 'ITEM_TERMS_OF_NOTTXT'
        EXCEPTIONS
          element = 1
          window = 2.
      IF sy-subrc NE 0.
        PERFORM protocol_update.
      ENDIF.
      us_text = charx.
    ENDIF.
    CALL FUNCTION 'WRITE_FORM'
      EXPORTING
        element = 'ITEM_TERMS_OF_NOTICE'
      EXCEPTIONS
        element = 1
        window = 2.
    IF sy-subrc NE 0.
      PERFORM protocol_update.
    ENDIF.
ENDLOOP.
IF NOT us_text IS INITIAL.
    CALL FUNCTION 'WRITE_FORM'
      EXPORTING
        element = 'EMPTY_LINE'
      EXCEPTIONS
        element = 1
        window = 2.
    IF sy-subrc NE 0.
      PERFORM protocol_update.
    ENDIF.
ENDIF.
ENDFORM.                    "DIFFERENT_TERMS
      FORM END_PRINT                                                *
FORM end_print.
PERFORM get_header_prices.
CALL FUNCTION 'CONTROL_FORM'
    EXPORTING
      command = 'PROTECT'.
PERFORM header_price_print.
CALL FUNCTION 'WRITE_FORM'
    EXPORTING
      element = 'END_VALUES'.
CALL FUNCTION 'CONTROL_FORM'
    EXPORTING
      command = 'ENDPROTECT'.
CALL FUNCTION 'WRITE_FORM'
    EXPORTING
      element = 'SUPPLEMENT_TEXT'
    EXCEPTIONS
      element = 1
      window = 2.
IF sy-subrc NE 0.
    PERFORM protocol_update.
ENDIF.
ENDFORM.                    "END_PRINT
      FORM FORM_CLOSE                                               *
      End of printing the form                                      *
FORM form_close.
CALL FUNCTION 'CLOSE_FORM'
    EXCEPTIONS
      OTHERS = 1.
IF sy-subrc NE 0.
    PERFORM protocol_update.
    retcode = 1.
ENDIF.
SET COUNTRY space.
ENDFORM.                    "FORM_CLOSE
      FORM FORM_OPEN                                                *
      Start of printing the form                                    *
--> US_SCREEN Output on screen                                   *
                 ' ' = printer                                      *
                 'X' = screen                                       *
--> US_COUNTRY County for telecommunication and SET COUNTRY       *
FORM form_open USING us_screen us_country.
INCLUDE yzrvadopfo.
INCLUDE RVADOPFO.
ENDFORM.                    "FORM_OPEN
      FORM FORM_TITLE_PRINT                                         *
      Printing of the form title depending of the field VBTYP       *
FORM form_title_print.
CASE vbdka-vbtyp.
    WHEN 'A'.
      CALL FUNCTION 'WRITE_FORM'
        EXPORTING
          element = 'TITLE_A'
          window = 'TITLE'
        EXCEPTIONS
          element = 1
          window = 2.
      IF sy-subrc NE 0.
        PERFORM protocol_update.
      ENDIF.
    WHEN 'B'.
      CALL FUNCTION 'WRITE_FORM'
        EXPORTING
          element = 'TITLE_B'
          window = 'TITLE'
        EXCEPTIONS
          element = 1
          window = 2.
      IF sy-subrc NE 0.
        PERFORM protocol_update.
      ENDIF.
    WHEN 'C'.
      CALL FUNCTION 'WRITE_FORM'
        EXPORTING
          element = 'TITLE_C'
          window = 'TITLE'
        EXCEPTIONS
          element = 1
          window = 2.
      IF sy-subrc NE 0.
        PERFORM protocol_update.
      ENDIF.
    WHEN 'E'.
      CALL FUNCTION 'WRITE_FORM'
        EXPORTING
          element = 'TITLE_E'
          window = 'TITLE'
        EXCEPTIONS
          element = 1
          window = 2.
      IF sy-subrc NE 0.
        PERFORM protocol_update.
      ENDIF.
    WHEN 'F'.
      CALL FUNCTION 'WRITE_FORM'
        EXPORTING
          element = 'TITLE_F'
          window = 'TITLE'
        EXCEPTIONS
          element = 1
          window = 2.
      IF sy-subrc NE 0.
        PERFORM protocol_update.
      ENDIF.
    WHEN 'G'.
      CALL FUNCTION 'WRITE_FORM'
        EXPORTING
          element = 'TITLE_F'
          window = 'TITLE'
        EXCEPTIONS
          element = 1
          window = 2.
      IF sy-subrc NE 0.
        PERFORM protocol_update.
      ENDIF.
    WHEN 'H'.
      CALL FUNCTION 'WRITE_FORM'
        EXPORTING
          element = 'TITLE_H'
          window = 'TITLE'
        EXCEPTIONS
          element = 1
          window = 2.
      IF sy-subrc NE 0.
        PERFORM protocol_update.
      ENDIF.
    WHEN 'K'.
      CALL FUNCTION 'WRITE_FORM'
        EXPORTING
          element = 'TITLE_K'
          window = 'TITLE'
        EXCEPTIONS
          element = 1
          window = 2.
      IF sy-subrc NE 0.
        PERFORM protocol_update.
      ENDIF.
    WHEN 'L'.
      CALL FUNCTION 'WRITE_FORM'
        EXPORTING
          element = 'TITLE_L'
          window = 'TITLE'
        EXCEPTIONS
          element = 1
          window = 2.
      IF sy-subrc NE 0.
        PERFORM protocol_update.
      ENDIF.
    WHEN OTHERS.
      CALL FUNCTION 'WRITE_FORM'
        EXPORTING
          element = 'TITLE_OTHERS'
          window = 'TITLE'
        EXCEPTIONS
          element = 1
          window = 2.
      IF sy-subrc NE 0.
        PERFORM protocol_update.
      ENDIF.
ENDCASE.
IF repeat NE space.
    CALL FUNCTION 'WRITE_FORM'
      EXPORTING
        element = 'REPEAT'
        window = 'REPEAT'
      EXCEPTIONS
        element = 1
        window = 2.
    IF sy-subrc NE 0.
      PERFORM protocol_update.
    ENDIF.
ENDIF.
ENDFORM.                    "FORM_TITLE_PRINT
      FORM GET_DATA                                                 *
      General provision of data for the form                        *
FORM get_data.
DATA: us_veda_vbeln     LIKE veda-vbeln.
DATA: us_veda_posnr_low LIKE veda-vposn.
CALL FUNCTION 'RV_PRICE_PRINT_REFRESH'
    TABLES
      tkomv = tkomv.
CLEAR komk.
CLEAR komp.
vbco3-mandt = sy-mandt.
vbco3-spras = nast-spras.
vbco3-vbeln = nast-objky.
vbco3-kunde = nast-parnr.
vbco3-parvw = nast-parvw.
CALL FUNCTION 'RV_DOCUMENT_PRINT_VIEW'
    EXPORTING
      comwa = vbco3
    IMPORTING
      kopf = vbdka
    TABLES
      pos   = tvbdpa.
Fetch servicecontract-data and notice-data for head and position.
us_veda_vbeln     = vbdka-vbeln.
us_veda_posnr_low = posnr_low.
CALL FUNCTION 'SD_VEDA_GET_PRINT_DATA'
    EXPORTING
      i_document_number = us_veda_vbeln
      i_language        = sy-langu
      i_posnr_low       = us_veda_posnr_low
    TABLES
      print_data_pos    = tkomservp
      print_data_head   = tkomservh
      print_notice_pos = tkomservpn
      print_notice_head = tkomservhn.
PERFORM get_controll_data.
PERFORM sender.
PERFORM check_repeat.
PERFORM tvbdpau_create.
ENDFORM.                    "GET_DATA
      FORM GET_ITEM_BILLING_SCHEDULES                               *
      In this routine the billing schedules are fetched from the    *
      database.                                                     *
FORM get_item_billing_schedules.
REFRESH tfpltdr.
CHECK NOT vbdpa-fplnr IS INITIAL.
CALL FUNCTION 'BILLING_SCHED_PRINTVIEW_READ'
    EXPORTING
      i_fplnr    = vbdpa-fplnr
      i_language = nast-spras
    TABLES
      zfpltdr    = tfpltdr.
ENDFORM.                    "GET_ITEM_BILLING_SCHEDULES
*&      Form ITEM_BILLING_SCHEDULES_PRINT
      This routine prints the billing shedules of a salesdocument    *
      position.                                                      *
FORM item_billing_schedules_print.
DATA: first_line(1) TYPE c.
first_line = charx.
LOOP AT tfpltdr.
    fpltdr = tfpltdr.
Output of the following printlines
    IF NOT fpltdr-perio IS INITIAL.
    periodische Fakturen
      CALL FUNCTION 'WRITE_FORM'
        EXPORTING
          element = 'ITEM_BILLING_SCHEDULE_PERIODIC'
        EXCEPTIONS
          element = 1
          window = 2.
      IF sy-subrc NE 0.
        PERFORM protocol_update.
      ENDIF.
    bei periodischen nur eine Zeile
      EXIT.
    ELSEIF fpltdr-fareg CA '14'.
    prozentuale Teilfakturierung
      IF NOT first_line IS INITIAL.
        CLEAR first_line.
        CALL FUNCTION 'WRITE_FORM'
          EXPORTING
            element = 'ITEM_BILLING_SCHEDULE_PERCENT_HEADER'
          EXCEPTIONS
            element = 1
            window = 2.
        IF sy-subrc NE 0.
          PERFORM protocol_update.
        ENDIF.
      ELSE.
        CALL FUNCTION 'WRITE_FORM'
          EXPORTING
            element = 'ITEM_BILLING_SCHEDULE_PERCENT'
          EXCEPTIONS
            element = 1
            window = 2.
        IF sy-subrc NE 0.
          PERFORM protocol_update.
        ENDIF.
      ENDIF.
    ELSEIF fpltdr-fareg CA '235'.
    wertmäßige Teilfakturierung
      IF NOT first_line IS INITIAL.
        CLEAR first_line.
        CALL FUNCTION 'WRITE_FORM'
          EXPORTING
            element = 'ITEM_BILLING_SCHEDULE_VALUE_HEADER'
          EXCEPTIONS
            element = 1
            window = 2.
        IF sy-subrc NE 0.
          PERFORM protocol_update.
        ENDIF.
      ELSE.
        CALL FUNCTION 'WRITE_FORM'
          EXPORTING
            element = 'ITEM_BILLING_SCHEDULE_VALUE'
          EXCEPTIONS
            element = 1
            window = 2.
        IF sy-subrc NE 0.
          PERFORM protocol_update.
        ENDIF.
      ENDIF.
    ELSEIF fpltdr-fareg CA '3'.
    Schlußrechnung
    ENDIF.
ENDLOOP.
ENDFORM.                    "ITEM_BILLING_SCHEDULES_PRINT
*eject
      FORM GET_ITEM_CHARACTERISTICS                                 *
      In this routine the configuration data item is fetched from   *
      the database.                                                 *
FORM get_item_characteristics.
REFRESH tkomcon.
CHECK NOT vbdpa-cuobj IS INITIAL.
CALL FUNCTION 'CUD0_GET_CONFIGURATION'                    "#EC EXISTS
    EXPORTING
      instance      = vbdpa-cuobj
      language      = nast-spras
    TABLES
      configuration = tkomcon
    EXCEPTIONS
      OTHERS        = 4.
ENDFORM.                    "GET_ITEM_CHARACTERISTICS
      FORM GET_ITEM_PRICES                                          *
      In this routine the price data for the item is fetched from   *
      the database.                                                 *
FORM get_item_prices.
CLEAR: komp,
         tkomv.
IF komk-knumv NE vbdka-knumv.
    CLEAR komk.
    komk-mandt = sy-mandt.
    komk-kalsm = vbdka-kalsm.
    komk-kappl = pr_kappl.
    komk-waerk = vbdka-waerk.
    komk-knumv = vbdka-knumv.
    komk-vbtyp = vbdka-vbtyp.
ENDIF.
komp-kposn = vbdpa-posnr.
CALL FUNCTION 'RV_PRICE_PRINT_ITEM'
    EXPORTING
      comm_head_i = komk
      comm_item_i = komp
      language    = nast-spras
    IMPORTING
      comm_head_e = komk
      comm_item_e = komp
    TABLES
      tkomv       = tkomv
      tkomvd      = tkomvd.
ENDFORM.                    "GET_ITEM_PRICES
      FORM GET_HEADER_PRICES                                        *
      In this routine the price data for the header is fetched from *
      the database.                                                 *
FORM get_header_prices.
CALL FUNCTION 'RV_PRICE_PRINT_HEAD'
    EXPORTING
      comm_head_i = komk
      language    = nast-spras
    IMPORTING
      comm_head_e = komk
    TABLES
      tkomv       = tkomv
      tkomvd      = tkomvd.
ENDFORM.                    "GET_HEADER_PRICES
*&      Form HEADER_DATA_PRINT
      Printing of header data like terms, weights ....               *
FORM header_data_print.
CALL FUNCTION 'WRITE_FORM'
    EXPORTING
      element = 'HEADER_DATA'
    EXCEPTIONS
      element = 1
      window = 2.
IF sy-subrc NE 0.
    PERFORM protocol_update.
ENDIF.
ENDFORM.                               " HEADER_DATA_PRINT
      FORM HEADER_PRICE_PRINT                                       *
      Printout of the header prices                                 *
FORM header_price_print.
LOOP AT tkomvd.
    AT FIRST.
      IF komk-supos NE 0.
        CALL FUNCTION 'WRITE_FORM'
          EXPORTING
            element = 'ITEM_SUM'.
      ELSE.
        CALL FUNCTION 'WRITE_FORM'
          EXPORTING
            element = 'UNDER_LINE'
          EXCEPTIONS
            element = 1
            window = 2.
        IF sy-subrc NE 0.
          PERFORM protocol_update.
        ENDIF.
      ENDIF.
    ENDAT.
    komvd = tkomvd.
    IF komvd-koaid = 'D'.
      CALL FUNCTION 'WRITE_FORM'
        EXPORTING
          element = 'TAX_LINE'.
    ELSE.
      CALL FUNCTION 'WRITE_FORM'
        EXPORTING
          element = 'SUM_LINE'.
    ENDIF.
ENDLOOP.
DESCRIBE TABLE tkomvd LINES sy-tfill.
IF sy-tfill = 0.
    CALL FUNCTION 'WRITE_FORM'
      EXPORTING
        element = 'UNDER_LINE'
      EXCEPTIONS
        element = 1
        window = 2.
    IF sy-subrc NE 0.
      PERFORM protocol_update.
    ENDIF.
ENDIF.
ENDFORM.                    "HEADER_PRICE_PRINT
      FORM HEADER_TEXT_PRINT                                        *
      Printout of the headertexts                                   *
FORM header_text_print.
CALL FUNCTION 'WRITE_FORM'
    EXPORTING
      element = 'HEADER_TEXT'
    EXCEPTIONS
      element = 1
      window = 2.
IF sy-subrc NE 0.
    PERFORM protocol_update.
ENDIF.
ENDFORM.                    "HEADER_TEXT_PRINT
      FORM ITEM_CHARACERISTICS_PRINT                                *
      Printout of the item characteristics -> configuration         *
FORM item_characteristics_print.
LOOP AT tkomcon.
    conf_out = tkomcon.
    IF sy-tabix = 1.
      CALL FUNCTION 'WRITE_FORM'
        EXPORTING
          element = 'ITEM_LINE_CONFIGURATION_HEADER'
        EXCEPTIONS
          OTHERS = 1.
      IF sy-subrc NE 0.
        PERFORM protocol_update.
      ENDIF.
    ELSE.
      CALL FUNCTION 'WRITE_FORM'
        EXPOR

Error when sending message(e-mail) from Process Chain ?

Hello SDN s,
How ya all ?
I scheduled a Process Chain with Message option to send it to (U - INternet Address) email ID but it says some error in sending message. What could be the reason ?
The following is the Job Log Entries....
30.06.2006 18:05:53 Job started                                                                          00        516         S
30.06.2006 18:05:53 Step 001 started (program RSPROCESS, variant &0000000000261, user ID ALEREMOTE)     00        550         S
30.06.2006 18:05:54 Hierarchy/attribute change successfully carried out                                RSM        794         I
30.06.2006 18:06:00 Document <PV FOR GETTING MESSAGE THROUGH E-MAIL - SUCCE> could not be sent          SO        654         S
30.06.2006 18:06:00 Error when sending message                                                        RSRA2        11         S
30.06.2006 18:06:01 Job finished                                                                        00        517         S
Thanks !!!
Best Regards....
Sankar Kumar
+91 98403 47141

Hey yes, in that T.Code all the values are 0. What to do to activate that ????????????
                                                                     Duration   Duration
                         Completed Error      In transit Waiting    In transit Waiting
                                                                         hh:mm      hh:mm
B08(100)                        0          0          0          0
FAX Telefax              0          0          0          0       0:00       0:00
     5 INT Internet             0          0          0          0       0:00       0:00
SMTP              0          0          0                  0:00       0:00
X40 X.400                0          0          0          0       0:00       0:00
        RML R/Mail or            0          0          0          0       0:00       0:00
        PAG                      0          0          0          0       0:00       0:00
        PRT                      0          0          0          0       0:00       0:00
So, how to solve this issue ? how to send e-mails ? what configuration or settings to be done ?
could u give the steps to do that ? as i am the only one BW guy here !?
Thanks !!!
Best Regards....
Sankar

Error when sending message: 500 Internal Server Error

Hi
IE is not accepting any messages,
when I try to send the messgae to the IE ( using RWB) i am getting the below error " Error when sending message: 500 Internal Server Error".
following things what i have noticed.
1. Pipleline URL is fine, both in the BS of XI and in the RFC destnation which i am maintaing on the IE admin) URL is "http://<host>:8000/sap/xi/engine?type=entry"
2. SICF all the XI serivess are up and running, i am able to test these service.
3. The http port is active ( SMICM )
Pls note the error is 500 Internal Server Error
regards
Nisar

I think in a simple term 500 can be said as "the request cannot be processed curretnly", these options mentieoned by you are not applicable in my case.
This generally occurs due to load problem or if you are on an SP less than 12 or even if there is an administration problem---I am on PI7.0 , what are the administration problem you are talking about?
1 Check Table Space is enough. ---i had installed server recently & very few interface running.
2 Server licence Date or Time. In this case change system date and restart server.---i have recently installed server.
3 Check the service pack levels on your XI. If it is obsolete upgrade it with latest versio----Can u explain more on this?
Try restart the java stack(XI Server) and follwing services.
com.sapii.af.app ---I am not passing trough Adater framework, so i dont think this service will matters....
com.sapii.cpa.af.app.---CPA cahe is done sucessfully, as i said i am not passsing through adapter framework.
basically for a simple HTTP post what might cause 500 error if all necessary services are up and running?
regards
Nisar

RFC error when sending logon data

Hi;
We cannot configure the STMS of our development system. When we try to
configure it, system gives an error message: Errors during distribution
of tp configuration; TMS Alert Viewers tells us
RFC_COMMUNICATION_FAILURE: RFC communications error with
system/destination TMSADM-FKT.DOMAIN_FKT RFC error when sending logon
data and READ_PROFILE_FAILED:File
erptest\sapmnt\trans\bin\TPPARAM
could not be opened for reading (No such file or directory).
Is there any advise for solution?
Best regards
Noyan
PS: Please find the profiles below:
START:
#.*       Start profile START_DVEBMGS00_erptest                                                                                *
#.*       Version                 = 000006                                                                                *
#.*       Generated by user = BASIS                                                                                *
#.*       Generated on = 30.12.2010 , 15:40:55                                                                                *
generated by R3SETUP
SAPSYSTEMNAME = FKT
INSTANCE_NAME = DVEBMGS00
SAPSYSTEM = 00
SAPGLOBALHOST = erptest
DIR_PROFILE = D:\usr\sap\FKT\SYS\profile
start database
#_DB = strdbs.cmd
#Start_Program_02 = immediate $(DIR_EXECUTABLE)\$(_DB) FKT
start message server
#_MS = msg_server.exe
Start_Program_03 = local $(DIR_EXECUTABLE)\$(_MS) pf=$(DIR_PROFILE)\FKT_DVEBMGS00_erptest
Start IGS
Start_Program_05 = local $(DIR_EXECUTABLE)$(DIR_SEP)igswd$(FT_EXE) -mode=profile pf=$(DIR_PROFILE)$(DIR_SEP)FKT_DVEBMGS00_erptest
start application server
#_DW = disp+work.exe
#Start_Program_04 = local $(DIR_EXECUTABLE)\$(_DW) pf=$(DIR_PROFILE)\FKT_DVEBMGS
General parameters for starting the system
#parameter created                          by: BASIS        24.12.2007 23:53:27
#SAPSYSTEM = 00
#parameter created                          by: BASIS        24.12.2007 23:53:27
#SAPSYSTEMNAME = FKT
#parameter created                          by: BASIS        24.12.2007 23:53:27
#INSTANCE_NAME = DVEBMGS00
#parameter created                          by: BASIS        24.12.2007 23:53:27
DIR_PROFILE = D:\usr\sap\FKT\SYS\profile
#parameter created                          by: BASIS        24.12.2007 23:53:27
#SAPGLOBALHOST = erptest
Start database
#parameter created                          by: BASIS        24.12.2007 23:53:27
_DB = strdbs.cmd
#parameter created                          by: BASIS        24.12.2007 23:53:27
Start_Program_01 = immediate $(DIR_EXECUTABLE)\$(_DB) $(SAPSYSTEMNAME)
Start message server
#parameter created                          by: BASIS        24.12.2007 23:53:27
MS = msgserver.exe
#parameter created                          by: BASIS        24.12.2007 23:53:27
Start_Program_02 = local $(DIR_EXECUTABLE)\$(_MS) pf=$(DIR_PROFILE)\FKT_DVEBMGS00_erptest
Start applications server
#parameter created                          by: BASIS        24.12.2007 23:53:27
_DW = disp+work.exe
#parameter created                          by: BASIS        24.12.2007 23:53:27
Start_Program_03 = local $(DIR_EXECUTABLE)\$(_DW) pf=$(DIR_PROFILE)\FKT_DVEBMGS00_erptest
DEFAULT:
SAPDBHOST = ERPTEST
dbms/type = mss
dbs/mss/server = ERPTEST
dbs/mss/dbname = FKT
dbs/mss/schema = fkt
SAPSYSTEMNAME = FKT
SAPGLOBALHOST = erptest
SAPFQDN = tr.delta.is
SAPLOCALHOSTFULL = $(SAPLOCALHOST).$(SAPFQDN)
SAPDBHOST = erptest
SAPTRANSHOST = erptest
DIR_TRANS =
$(SAPTRANSHOST)\sapmnt\trans
#DIR_TRANS = D:\usr\sap\trans
DIR_PROFILE = D:\usr\sap\FKT\SYS\profile
SAP Message Server for ABAP
rdisp/mshost = erptest
rdisp/sna_gateway = erptest
rdisp/sna_gw_service = sapgw00
rdisp/vbname = erptest_FKT_00
rdisp/enqname = erptest_FKT_00
rdisp/btcname = erptest_FKT_00
rdisp/msserv = sapmsFKT
rdisp/msserv_internal = 3900
rdisp/bufrefmode = sendoff,exeauto
login/system_client = 200
#GUVENLIK PARAMETRELERI
login/password_expiration_time = 90
login/min_password_lng = 6
#parameter created                          by: BASIS        25.03.2004 08:41:25
rdisp/gui_auto_logout = 10800
#parameter created                          by: BASIS        25.03.2004 08:37:47
#old_value: 3                                 changed: BASIS 25.03.2004 08:42:38
login/fails_to_user_lock = 6
#validasyon geregi, g#venligi artirma ama#i - check active but no check for SRF
#parameter created                          by: BASIS        16.06.2007 17:35:41
#old_value: 2
#changed: BASIS         14.05.2008 15:24:55
auth/rfc_authority_check = 1
#otomatik unlocki iptal eder
#parameter created                          by: BASIS        10.11.2006 17:47:15
login/failed_user_auto_unlock = 0
#AUDIT PARAMETRELER?
#old_value:                                   changed: BASIS 20.04.2005 17:13:37
rsau/max_diskspace/per_day = 1996800000
#old_value: 1000000000                        changed: BASIS 20.04.2005 17:17:01
#old_value: 0                                 changed: BASIS 20.04.2005 17:19:12
rsau/max_diskspace/local = 2048000000
#old_value: 2000000000                        changed: BASIS 28.03.2005 23:17:11
#old_value: 2                                 changed: BASIS 29.03.2005 12:09:14
#old_value: 0                                 changed: BASIS 20.04.2005 17:13:37
rsau/max_diskspace/per_file = 665600000
rsau/enable = 1
rsau/local/file = D:\usr\sap\FKT\DVEBMGS00\log\++++++++######..AUD
rsau/selection_slots = 12
#rec/client = ALL
DIR_AUDIT = D:\usr\sap\FKT\DVEBMGS00\log
FN_AUDIT = ++++++++######..AUD
#DIL PARAMETRELERI
#Turkish codepage settings
abap/import_char_conversion = 0
install/codepage/db/non_transp = 1610
install/codepage/db/transp = 1610
zcsa/installed_languages = DET
#zcsa/system_language = E
zcsa/system_language = T
zcsa/second_language = E
install/codepage/appl_server = 1610
#OS dependent
abap/locale_ctype = Turkish_turkey.28599
#DIR_PUT = D:\usr\sap\FKQ\upg\abap
   *** UPGRADE EXTENSIONS (RELEASE "701") ***
#rdisp/msserv_internal = 3900
#system/type = ABAP
INSTANCE:
SAPSYSTEMNAME = FKT
SAPGLOBALHOST = erptest
SAPSYSTEM = 00
INSTANCE_NAME = DVEBMGS00
DIR_CT_RUN = $(DIR_EXE_ROOT)\$(OS_UNICODE)\NTAMD64
DIR_EXECUTABLE = $(DIR_INSTANCE)\exe
icm/server_port_0 = PROT=HTTP,PORT=80$$
SAP Message Server parameters are set in the DEFAULT.PFL
ms/server_port_0 = PROT=HTTP,PORT=81$$
#rdisp/wp_no_dia = 10
#rdisp/wp_no_btc = 3
#rdisp/wp_no_enq = 1
#rdisp/wp_no_vb = 1
#rdisp/wp_no_vb2 = 1
#disp/wp_no_spo = 1
rdisp/wp_no_dia = 12
rdisp/wp_no_vb = 3
rdisp/wp_no_vb2 = 0
rdisp/wp_no_enq = 1
rdisp/wp_no_btc = 3
rdisp/wp_no_spo = 1
#PERFORMANS PARAMETRELERI
#parameter created                          by: SAP*         08.08.2001 10:30:18
abap/fieldexit = yes
#parameter created                          by: ALPER        13.10.2000 18:24:16
install/collate/active = 1
rdisp/max_wprun_time = 25000
MEMORY_NO_MORE_PAGING dump nedeniyle
#parameter created                          by: BASIS        27.12.2006 17:00:22
rdisp/PG_MAXFS = 262144
abap/heap_area_nondia = 2000000000
rdisp/PG_SHM = 16384
rdisp/ROLL_SHM = 32768
#'STORAGE_PARAMETERS_WRONG_SET' or 'TSV_TNEW_PAGE_ALLOC_FAILED'
#Note 552209 - Maximum memory utilization for processes on NT/Win2000
#parameter created                          by: BASIS        30.10.2007 10:57:24
#abap/heap_area_nondia = 50000
#parameter created                          by: BASIS        30.10.2007 10:58:54
#rdisp/PG_SHM = 0
#parameter created                          by: BASIS        30.10.2007 10:58:27
#rdisp/ROLL_SHM = 625
#EWA report 12.2007
#parameter created                          by: BASIS        03.01.2008 19:49:57
dbs/mss/stats_on = 1
#EWA report 12.2007
#parameter created                          by: BASIS        03.01.2008 19:49:33
dbs/oledb/stats_on = 1
#EWA report 12.2007
#parameter created                          by: BASIS        03.01.2008 19:48:23
dbs/oledb/add_procs = 8
#EWA report 12.2007
#parameter created                          by: BASIS        03.01.2008 19:47:29
rsdb/esm/max_objects = 2000
#EWA report 12.2007
#parameter created                          by: BASIS        03.01.2008 19:47:03
rsdb/otr/buffersize_kb = 4096
#EWA report 12.2007
#parameter created                          by: BASIS        03.01.2008 19:46:21
rsdb/esm/buffersize_kb = 4096
Eyl#l 2006 EWA raporu
#parameter created                          by: BASIS        24.11.2006 13:18:14
ztta/parameter_area = 16000
Eyl#l 2006 EWA raporu
#parameter created                          by: BASIS        24.11.2006 13:16:43
enque/table_size = 10000
Eyl#l 2006 EWA raporu
#parameter created                          by: BASIS        24.11.2006 13:16:20
gw/max_sys = 2000
#Eyl#l 2006 EWA raporu
#parameter created                          by: BASIS        24.11.2006 13:16:01
gw/max_overflow_size = 25000000
#Eyl#l 2006 EWA raporu
#parameter created                          by: BASIS        24.11.2006 13:15:19
rdisp/max_comm_entries = 2000
Eyl#l 2006 EWA raporu
#parameter created                          by: BASIS        24.11.2006 13:14:48
rdisp/tm_max_no = 2000
Eyl#l 2006 EWA raporu
#parameter created                          by: BASIS        24.11.2006 13:14:20
gw/max_conn = 2000
Eyl#l 2006 EWA raporu
#parameter created                          by: BASIS        24.11.2006 13:13:42
rdisp/max_arq = 2000
#Eyl#l 2006 EWA raporu
#parameter created                          by: BASIS        24.11.2006 13:12:57
ztta/roll_area = 3500000
#parameter created                          by: BASIS        18.05.2005 09:20:25
#old_value: 90                                changed: BASIS 18.05.2005 09:22:25
rdisp/max_hold_time = 300
#parameter created                          by: BASIS        20.08.2003 12:10:20
#old_value: 6144
#changed: BASIS         03.01.2008 19:42:10
rsdb/obj/buffersize = 20000
#parameter created                          by: BASIS        20.08.2003 12:09:48
#old_value: 6000
#changed: BASIS         03.01.2008 19:42:59
rsdb/obj/max_objects = 20000
note 103747
#parameter created                          by: BASIS        08.07.2003 20:42:11
#old_value: 250000
#changed: BASIS         30.10.2007 10:56:17
#abap/buffersize = 100000
#changed: BASIS         03.01.2008 19:40:36
#abap/buffersize = 300000
#by: BASIS 12.06.2008
abap/buffersize = 400000
note 103747
#parameter created                          by: BASIS        08.07.2003 20:41:32
#zcsa/presentation_buffer_area = 20000000
#64 bite gectikten sonra   by: BASIS 10.06.2008
zcsa/presentation_buffer_area = 30000768
note 103747
#parameter created                          by: BASIS        08.07.2003 20:40:55
rsdb/ntab/ftabsize = 30000
note 103747
#parameter created                          by: BASIS        08.07.2003 20:40:12
rtbb/max_tables = 500
note 103747
#parameter created                          by: BASIS        08.07.2003 20:39:15
#old_value: 20000
#changed: BASIS         03.01.2008 19:41:29
#rtbb/buffer_length = 30000
#64 bite gectikten sonra by: BASIS 10.06.2008
rtbb/buffer_length = 50000
note 103747
#parameter created                          by: BASIS        08.07.2003 20:38:26
zcsa/db_max_buftab = 10000
note 103747
#parameter created                          by: BASIS        08.07.2003 20:37:37
#zcsa/table_buffer_area = 50000000
#64 bite gectikten sonra   by: BASIS 10.06.2008
#zcsa/table_buffer_area = 89000000
by: BASIS 12.06.08
zcsa/table_buffer_area = 99000000
note 103747
#parameter created                          by: BASIS        08.07.2003 20:36:54
sap/bufdir_entries = 10000
note 103747
#parameter created                          by: BASIS        08.07.2003 20:36:12
rsdb/cua/buffersize = 8000
#note 103747
#parameter created                          by: BASIS        08.07.2003 20:34:46
#old_value: 5000                              changed: BASIS 08.07.2003 20:35:39
rsdb/ntab/sntabsize = 5500
#parameter created                          by: BASIS        08.07.2003 20:33:56
#note 103747
#old_value: 10607                             changed: BASIS 08.07.2003 20:34:58
#old_value: 10000                             changed: BASIS 08.07.2003 20:35:39
rsdb/ntab/irbdsize = 11000
#note 103747
#parameter created                          by: BASIS        08.07.2003 20:32:18
rsdb/ntab/entrycount = 40000
#old_value: 2076                              changed: BASIS 28.06.2005 19:36:21
#old_value: 5735                              changed: BASIS 28.06.2005 19:40:01
PHYS_MEMSIZE = 4096
#64 bite gectikten sonra   by: BASIS 10.06.2008
abap/heaplimit = 40894464
abap/heap_area_total = 2000683008
ztta/roll_extension = 2000683008
em/blocksize_KB = 4096
   *** UPGRADE EXTENSIONS (RELEASE "701") ***
#rdisp/elem_per_queue = 2000
#auth/auth_number_in_userbuffer = 9000
#snc/enable = 0

Hi Srikishan;
You are right. The problem was releated with secstore. I found a SAP note ( Note 1532825 - Deleting SECSTORE entries during system export/system copy). I created the program which ise mentioned in the note and than run it. After that everything seems ok now.
Thanks for your help and interest
Best regards
Noyan

Error 50103 (rwfdt:rwfdtprint): ERR Error occurred sending Job output

Getting the below with a particular report I am running. Seems that the cache file isn't getting created for some reason. There are other cache files in the directory so it's not a user permission type thing I'm guessing.
Anyone seen this before?
[2007/7/4 2:10:15:431] APP 50103 (rwfdt:rwfdtni_NextInstance): running
[2007/7/4 2:10:15:431] APP 50103 (rwfdt:rwfdtni_NextInstance): quit
[2007/7/4 2:10:15:431] APP 50103 (rwfdt:rwfdtgcf_GenCachefile): running
[2007/7/4 2:10:15:431] APP 50103 (rwfdt:rwfdtgcf_GenCachefile): Cache file is C:\oracle\product\10.2.0\MT\reports\cache\66117201.txt
[2007/7/4 2:10:15:431] APP 50103 (rwfdt:rwfdtgcf_GenCachefile): quit
[2007/7/4 2:10:15:431] APP 50103 (rwfdt:rwfdtprint): caching output from backend drivers
[2007/7/4 2:10:15:431] Error 50103 (rwfdt:rwfdtprint): 14:10:15 ERR Error occurred sending Job output to cache

Hi,
Sorry I didn't realize that i didn't answer to this question because of reference to others.
I solve it with change of values in rwserver.conf
one of values is default but other solve issue.
<property value="no" name="keepConnection"/>
engLife="2" or engLife="1"This happens in my env because application often change user (db schema). And this is workaround for restarting engine.
regards

Error when sending message: 404 not found

Hi,
New to XI, practicing file to jdbc scenario. File is pickedup from the source folder but nothing appearing on the receiver end ms access database.
In the Component Monitoring, tried sending message manually with all the right info in Integration engine, getting an error message saying:
"Error when sending message : 404 not found"
Also tried in Adapter Engine and the result same.
Before doing this scenario, I tried file - file scenario then also the sender file pickedup from source folder but nothing happend at the receiver end.
Any idea's?? what might be the issue????
Thanks,
Venu.

Hi Venu,
"404 is a not found error", plz make a check of your URL you're using is correct? do you use the right port? Normally the port is 80<SystemNo>, so rather 8001 than 7001.
Also check in transaction SICF, if the node /sap/xi/adapter_plain has been activated, if not, activate it and try again.
If you are testing sending the message to the Adapter Engine, then the Send Message URL should be like this:
http://<server>:<J2EEport>/MessagingSystem/receive/AFW/XI
For your error, refer to the following threads:
Unable to find an associated SLD element
Unable to refresh cache contents in XI.
Unable to find an associated SLD element
Also check that the Adapter Engine is successfully registered in the SLD. To do this, call the Content Maintenance function in the SLD as follows:
http://<sld-host>:<sld-j2ee-port>/sld u2192 Administration u2192 Content Maintenance.
Select XI Adapter Framework.
Thirteen associations have to be registered.
(Source: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2498bf90-0201-0010-4884-83568752a857)
If you can't find all the associations, then you will have to create the associations manually.
This is a very good blog which answers ur question:
check this weblog
https://weblogs.sdn.sap.com/pub/wlg/4061?page=last&x-showcontent=off [original link is broken] [original link is broken] [original link is broken]
Regards,
Vinod.

Error when sending message: 500 Timeout

while sendin a message in the http to rfc scenario, im gettin this error message "Error when sending message: 500 Timeout".
can any1 throw some light on this.

Hi venu,
you need to go to RZ10 and there select the profile instance and go with the extended maintance option in the change mode.
there are two ways you can change it:
1. check out note: 824554
TCODE - rz10
icm/server_port_0 = PROT=HTTP,PORT=8010,TIMEOUT=800,PROCTIMEOUT=800
(for 800 seconds)
8010 is my HTTP port so you have to change it:)
2. SXMB_ADM -> configure integration server -> change specific identifiers
runtime parameter:
Parameter HTTP_TIMEOUT
Meaning
Specifies the timeout for http connections (time between two data packages at line level). This value overrides the system profile parameter icm/server_port_n (for example, icm/server_port_0 : PROT=HTTP, PORT=50044, TIMEOUT=900). If you do not set the parameter HTTP_TIMEOUT or if you set the parameter to 0, then the setting for the system profile parameter is used.
Personally I only changed the one from the instance profile but the second one should work too
My suggestion is change only PROCTIMEOUT to 600 or 900 but dont change TIMEOUT. Imp thing is u need to restart the XI, then onlychanges will take place.
If these dosent work out go for changing TIMEOUT also. Just set the value for the instance and dont maintain the HTTP_Timeout in the sxmb_adm
Let me know what u have done , if it works
Thanks,
srini

Test message from RWB: Error when sending message: 401 Unauthorized

Hi Experts,
While I am sending test message from RWB, I am getting following error:
Error when sending message: 401 Unauthorized
I am using correct userid/password as I am working with Repository/directory. Also in one of the test scenario files are picking up from folder but never got processed because of similar issue (HTTP_RESPONSE_CODE_NOT_OK) and SERVICE NOT AVAILABLE.
I am having SAP_ALL authorizations and few days back everything was fine.
I think something wrong with configuration in XI but I am unable to pin point.
Please help.
Regards,
Gourav

Yes,
but
Role of Business System : Integration system
Corresponding Integ. Server : http://<XI server>:<http port>/sap/xi/engine?type=entry
How can I change it to Application system
and RUNTIME->IS_URL = http://<XI server>:<http port>/sap/xi/engine?type=entry
Regards,
Gourav

RWB:Error when sending message: 404 Not Found

Dear all,
"i am getting error: Error when sending message: 404 Not Found"
while testing from rwb > Component Monitoring > Non-Central Adapter Engines > Adapter Engine AIPID > test message >
with send message to = http://pid:50000/sap/xi/engine?type=entry - pi server url
sld buss system > pipeline url http://pid:50000/sap/xi/engine?type=entry (same)
and my id comm channel > target host > bid.xxx.com with service no
(adapter type: xi
adapter engine: Integration server
address type: url address
target host: bid
service no: 8000
path: /sap/xi/engine?type=entry
i am working in nw2004s system)
while testing cache connectivity test from rwb > Component Monitoring
i got error:http://docs.google.com/Doc?id=dcdrq9jt_0g6j35p
green: Integration Repository
green: Integration Directory
green: Integration Server - JAVA
red:Adapter Engine af.axd.aipid
yello:Integration Server - ABAP
Adapter Engine af.axd.aipid > Attempt to fetch cache data from Integration Directory failed; cache could not be updated
[Fetch Data]: Unable to find an associated SLD element (source element: SAP_XIIntegrationServer, [CreationClassName, SAP_XIIntegrationServer, string, Name, is.00.aipid, string], target element type: SAP_BusinessSystem)
[Data Evaluation]: GlobalError
though if i try to send message from rwb...> with send message to field with : directly to bi rather than pipeline url through bi than message send successfully but not getting into component monitoring.
what should i do?
best regards,
dushyant.
refer this forum: is rwb's send message to field = sld>buss system>Pipeline URL?
and
SXI_CACHE
@8O@ Error during last attempt to refresh cache
LCR_GET_OWN_BUSINESS_SYSTEM - NO_BUSINESS_SYSTEM
Smq2 = 0
Sm58 = 0

Hi,
If you are testing sending the message to the Adapter Engine, then the Send Message URL should be like this:
http://<server>:<J2EEport>/MessagingSystem/receive/AFW/XI
For your error, refer to the following threads:
Unable to find an associated SLD element
Unable to refresh cache contents in XI.
Unable to find an associated SLD element
Cheers
Manish

Error when sending message: Method not implemented

Hi, All:
We have newly setup system and when we test sending test message from RWB, (RWB-Component Monitoring-Integration Engine-Test Tab), we got following error:
"Error when sending message: Method not implemented", I know this is related to post configuration issue, I just know someone has come cross the situation and how it was resolved.
Thanks
Liang

HI Liang
Yes it looks like post installation problem. I have not come across this but i think you should check with the RFC created for IE while installation. To connect IE & AE and even the exchange profile if something is missing
Thanks
Gaurav

PDF Report Error When Distribute the Output?

REP-0069: Internal Error.
REP-57054: In-process job terminated:Executed successfully but there were some errors when distribute the output.
REP-50159: Executed successfully but there were some errors when distribute the output.
Approximately 5000 Pages
Distribute PDF File Approximately 1700 Files
How i can resolve this issue?

Based that you are in base release I will encourage you to upgrade to the latest patchset for 10gR2 (10.1.2.3) and then apply the recommended bundled patch on top of 10.1.2.3 as several issues have been fixed with
those patches.
Reference
Oracle Reports - Recommended Patch Bundle on Top of 10.1.2.3 (Doc ID 1162562.1)
Regards RZ

Error when sending PO output to email

Similar Messages

Maybe you are looking for