Error when try to schedule a Webi Report

Good day every one:
Can anyone please help me to solve this problem??? the issue is this, I want to schedule a Webi report but when i clic on Schedule and go to Format and Destinations tab, i got this message:
displayErrorMessage="VIEWER:VIEWER_ERR_DEFAULT (Error: INF )"; traceErrorMessage="\u003Cinput type="hidden" name="BENCHERROR" value="Error Number : - Error Description : VIEWER:_VIEWER_ERR_DEFAULT"\u003E";
And i can not see the formats availables to schedule the report and of course i can not see the configuration and destinations options.
Looking for an answer i found this:
http://forums.sdn.sap.com/thread.jspa?threadID=1537527
but that is an old post and i can not find the file mentioned there, can somebody please help me to fix this???
We are using:
BOBJ 3.1 SP3
Windows Server 2003
32 bits
Regards

I just found this
I was able to fix the issue by replacing the webiviewer.properties file with the file from the WARFILES\WEBAPPS directory. The webiviewer.properties file looks like it was corrupt as there was only 1 line in the file. After replacing and restarting the servers there's no longer an error when selecting Formats & Destinations.
I checked those webiviewer.properties and like you , one of them had only 1 line, about the language.
So I replace the one from Tomcat55\webapps\AnalyticalReporting\WEB-INF\classes with the one in the folder Tomcat55\webapps\AnalyticalReporting\classes
My guess is that this properties is corrupted because of the installation of other language. What should be done is updating the file with the new language parameters but what is done is a replace of the file.
I foun that in this link
http://www.forumtopics.com/busobj/viewtopic.php?t=150796&sid=bad10669f42c6de2b77e37b03122334d
I will apply this and if im success i let you know
Regards
Edited by: Elio Javier Guzman Hernandez on Oct 21, 2011 6:25 PM
Well the solution that i gave you works fine.
Regardas
Edited by: Elio Javier Guzman Hernandez on Oct 21, 2011 10:42 PM

Similar Messages

Error when trying to display a Webi report through the Folder iView

Hi all
I am getting the following error when Im trying to display a Webi report through the SAP Portal. We have installed the SAP Integration Kit and are able to see the content of the Infoview. However when we click on a Webi report, we receive the following error:
Could not get page number. (Error: RWI 00223) (Error: INF)
Have anyone else encountered this problem? Please assist! Any help will be rewarded.
(We are running XI Rel 2).
Addition from trace file (tomcat):
com.businessobjects.rebean.wi.CommunicationException: Could not get page number. (Error: RWI 00223)
     at com.businessobjects.rebean.wi.occa.OccaReportComAdapter.setBlobKey(OccaReportComAdapter.java:542)
     at com.businessobjects.rebean.wi.occa.OccaReportComAdapter.getView(OccaReportComAdapter.java:376)
     at com.businessobjects.rebean.wi.occa.OccaReportComAdapter.getView(OccaReportComAdapter.java:297)
     at com.businessobjects.rebean.wi.ReportImpl.getView(ReportImpl.java:384)
     at com.businessobjects.rebean.wi.ReportImpl.getView(ReportImpl.java:407)
     at org.apache.jsp.viewers.cdz_005fadv.viewReport_jsp._jspService(viewReport_jsp.java:1182)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324)
     at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
     at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
     at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:704)
     at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:474)
     at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:409)
     at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:312)
     at org.apache.jasper.runtime.PageContextImpl.doForward(PageContextImpl.java:670)
     at org.apache.jasper.runtime.PageContextImpl.forward(PageContextImpl.java:637)
     at org.apache.jsp.viewers.cdz_005fadv.report_jsp._jspService(report_jsp.java:325)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324)
     at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
     at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
     at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
     at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
     at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
     at java.lang.Thread.run(Thread.java:534)
Furthermore I'd like to see an example of the cms_name entry. The documentation states: In addition, specify the Application Parameter for each iView. For this property, enter cms_name=[cms] for the fully qualified server name., but I have doubts as to what format to use.
Kind regards,
Martin Søgaard

Hi Jim Ji
The report can be displayed from the java infoview, no doubt, so the report itself works.
But the report cannot be seen from the "SAP Infoview" (:/businessobjects/enterprise115/sap) which is the infoview, I reference from the Folder iView (through the system in the SAP portal). And since the SAP Portal Integration Kit seems very old - the Folder iView was created 12-08-2004 by Ingo Hilgefort - there might be an old version of the jar-files somewhere in the installation.
I guess I should check the version of the jar-files in WEB-INF/lib of our web application (Tomcat) folder, and see if they have been overwritten by the SAP Portal Integration Installation or are an older version of the files in Program FilesBusiness Objectscommon3.5javalib? And also check if somewhere in the .../sap installation there are some old jar-files?
Kind regards,
Martin Søgaard

Error when trying to open a WEBI report with OpenDocument.jsp

I have a weird problem, i'm trying to open a WEBI report with OpenDocument.jsp and I get the following error message
An error has occurred: Could not find the document.
the weird thing is that this error only occurs when i use Internet Explorer. When i use the same link with Google Chrome, i see my report.
How do I make this work, our standard web browser is Internet explorer.
here is a sample link i use to call my report.
http://<server>:8080/OpenDocument/opendoc/openDocument.jsp?iDocID=AVGrgQALGJZGipKCfjPPZ3g&sIDType=CUID
Our BO environment is :
BO XI 3.1 sp2 fp 2.3
tomcat 5.5 front-end

Hi,
I don't know how much this solution will help you but it is worth trying.
SAP Note: 1198844
[https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3131393838343426]
Regards,
Bashir Awan

[Infoview - BOXI3.1] Error when attempting to schedule a crystal report

Hi,
I have an error, when i attempt to schedule a report. When i click on the "Format" link I get the error below:
An error has occurred:Item SI_XSLT_INFO was not found in the collection.
Googling this error suprisingly returns no results! I have no idea what could be at fault and would love to get some help from any experts! I am a very new user to business objects enterprise.
Thanks a lot in advance,
Dom

Hi Friend,
I faced the same problem while scheduling the crystal report in BO XI R3 Infoview.
How I resolved it is by publishing(Using Publishing Wizard) the crystal report in the BO XI R3 enterprise and then scheduling. It worked fine.
The crystal report which I created was in Crystal Reports XI and the new BO XI Infoview supports Crystal Reports 2008.
I think this might be the problem.
Thanks and Regards

Error when used GOTO option in Web Report which is published in EP

Hi All,
I ran the report Process Chain Status report in EP and I got the data for that.When I right click on the one process chain and clicked GOTO option ->clicked on Process Chain Log and its giving the following error.Pls help me out regarding this.
---Error when processing your request -
What has happened?
The URL .... was not called due to an error.
Note
     The following error text was processed in the system XXX: Template interpretation cancelled, syntax error.
     The error occurred on the application server xxx_yyy and in the work process 1 .
     The termination type was: RABAX_STATE
     The ABAP call stack was:
SYSTEM-EXIT of program SAPLRSRR_WEB
What can I do?
     If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system xxx in transaction ST22.
     If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server xxx_yyy in transaction SM21.
     If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 1 in transaction ST11 on the application server xxx_yyy . In some situations, you may also need to analyze the trace files of other work processes.
     If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-https -c: 500 -u: XBW -l: E -s: xxx -i: xxx_yyy -w: 1 -d: 20091208 -t: 113254 -v: RABAX_STATE -e: ITS_CANT_LOAD_INCLUDE
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Your answers will be very much helpful for ontime delivery.
Thanks in advance,
BI User

Hi,
I guess you can refer this SDN thread
Error running SOAMANAGER
Rgds,
Murali

#SYNTAX error while using Merge Dimension in webi report

Hi All,
# Syntax error when using merge dimension in webi report
screen shot has been attached.
iam using BO 4.0 SP6
checked the datatypes in BW
they are same in BW in both the queries
i followed the given links but no result.
https://websmp230.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3138343530303526
https://websmp230.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3136323339323126
https://websmp230.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3137353438313026
http://scn.sap.com/thread/3592588#15241008
Need Help!!!!!
Regards
Sushma

Hi Mark,
Thanks for the reply,
I did not use any formula,
I used merge dimension
Anyways i tried in other system,it s working fine.
Regards
sushma

Getting error when schedule a webi report

Hi All,
I am getting error "Cannot initialize Report Engine server. (Error: RWI 00226) Error: INF) while schedule a Webi report.
Could anyone help me regarding the error?
Regards

Hai
Check this Links
http://www.sap-forum.org/f22/smtp-error-when-scheduling-webi-report-t483/
http://www.businessobjectstips.com/tips/server/sizing-limits-to-web-intelligence-report-server-maximum-simultaneous-connections/

Getting error while schedule a webi report

Hi All,
I am getting error "A database error occured. The database error text is: The supplied XML is not valid. [Measures].[4KO5AOUTL3ZKE55WDDOMUB0AI]. (WIS 10901) " while scheduling a Webi report.
Could anyone help me regarding the error?
Regards

Hi Manoj,
Go to the controls tab in parameters in universe designer and there increase the "Limit size of result set to" and "limit execution time to".
Also in webi go to the edit query and increase the "maximum rows retrived" and "maximu retrievel time".
I think this should avoid partial results.
Thanks,
Neeraj

Scheduled a webi report and set it send to EMAIL.

Our customer found when they scheduled a webi report and set it send to EMAIL, it will cost much more time than usual after they have their SIA restarts.
The first time it takes 4-5 times longer to receive a report in mailbox than next time onwards.
Please help.
Thanks Much,
Abhishek

Hi Abishek,
If the schedule is taking 4-5 times longer to schedule following the SIA restart I suppose it is possible that the Webi Job Server and Webi Processing Servers are not fully registered with the CMS - can you check that.
Also can you test by ensuring that if there are any Webi Job Servers\Webi Processing Servers in the environment which are stopped\disabled, can you retest after deleting those servers. There is a bug with XI3.1:
ADAPT01371367
Description:
Scheduled jobs often have a delay when the system is upgraded to BusinessObjects Enterprise XI 3.1 SP2 FP 2.2 or FP 2.3.This problem also happens when some of the servers required for scheduling are stopped and disabled. In this case, the Adaptive Job Server (AJS) tries to confirm if all available Webi Report Servers are running, and this causes the delay in running the scheduled jobs.
New Behavior:
This problem has been resolved.
Do you have a test system where you could install FP3.1 and check the fix?
The only "workaround" I could suggest would be to ensure that all services needed for the schedule are running\enabled (Adaptive Job Servers and Webi Processing Servers). This will stop the Adaptive Job Server from its continual querying for those servers. The adverse effect of this is that the more unnecessary services which are running will necessitate increased network communication.
To check if this is the actual issue you are hitting, you would need to trace the schedule and check for messages like this in the logs:
[2010-08-27 12:02:08,769] [TID:24] [ERROR] [webi.PublishingHelper.<init>():89]: unable to retrieve all mandatories servers to proceed this job
Alternatively, log a message with SAP Support for further investigation.
<<Text removed>>
Kind regards,
John
Edited by: Matt on Oct 10, 2011 10:14 AM

Designer Workflow SharePoint 2013 error when try to assign a task forbidden

designer Workflow SharePoint 2013 error when try to assign a task
Next attempt scheduled in less than one minute. Details of last request: HTTP Forbidden to http://oursite/_vti_bin/client.svc/web/lists/getbyid(guid'3cd5739e-f243-4b75-a724-fdbee704913f')/ContentTypes
Correlation Id: 56baaedd-a2d1-4377-9277-89d20cbdf434
and then after cancel I get
RequestorId: da9fe991-f8d5-7f4a-7dc2-fec198a2a115. Details: System.ApplicationException: HTTP 403 {"x-ms-diagnostics":["30000000; reason=SSL is required"],"SPRequestGuid":["000515ef-1d97-4d94-a35e-f0423f2f5eaa"],"request-id":["000515ef-1d97-4d94-a35e-f0423f2f5eaa"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"SPRequestDuration":["151"],"SPIisLatency":["0"],"MicrosoftSharePointTeamServices":["15.0.0.4551"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1;
RequireReadOnly"],"Date":["Wed, 15 Jan 2014 17:49:27 GMT"],"Server":["Microsoft-IIS\/8.0"],"X-Powered-By":["ASP.NET"]} at
Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context) at System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody
MCTS Sharepoint 2010, MCAD dotnet, MCPDEA, SharePoint Lead

Hi Amit,
According to your description, my understanding is that the error occurred when you assigned a task.
Did you install any CU for SharePoint?
If yes, after an update has been performed, several Windows PowerShell cmdlets must be run in order to maintain the connection between the SharePoint Server 2013 farm and the Workflow Manager farm.
$credential = [System.Net.CredentialCache]::DefaultNetworkCredentials
$site = Get-SPSite(<siteUri>)
$proxy = Get-SPWorkflowServiceApplicationProxy
$svcAddress = $proxy.GetWorkflowServiceAddress($site)
Copy-SPActivitiesToWorkflowService -WorkflowServiceAddress $svcAddress -Credential $credential -Force $true
After running the command, re-register the workflow service to see if the issue still occurs.
Register-SPWorkflowService: http://technet.microsoft.com/en-us/library/jj663115.aspx
More information are provided in the link below:
http://technet.microsoft.com/en-us/library/dn133867.aspx
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Schedule a Webi report

Hi All,
I am getting error "A database error occured. The database error text is: Failed to execute MDX query. Reason: Inconsistent input parameter (parameter: <unknown>, value <unknown>). (WIS 10901) " while scheduling a Webi report.
Could anyone help me regards the error?
Regards

This error message means the parameter assigned to the prompt of the report while scheduling, was not correct.
Please check the parameters in the prompt section while scheduling and assign proper values.

Is it possible to schedule a Webi report based on another input, i.e. expose a time in which a process was finished.

These are Webi, user created reports.
Is it possible to schedule a Webi report based on another input, i.e. expose a time in which a process was finished (this can be obtained via a SQL call, service call, etc).
The issue is that if a user schedules a report for 9PM but a process to move data, etc has not completed then that forces the user to keep re-freshing the report hoping that the process has been complete.
Ideally, in the selection UI add to the dropdown for 'when' the option 'Use Process X completion Time' (since it is a daily report).
Then starting around 9PM check to see if that 'time" value is populated then refresh (run) the report. Or it could just be a flag that the process has finished.
User's in the webi environment are asking for this, and moving their reprots to BO is not an option. That's why they have the custom webi enviroment.
Thank you.

There is no very good way to create a working event based on a file as the file will need to be deleted as soon as the event is triggered. However there are work around which can be done for this. Here is a link which is discussing about the process.. http://scn.sap.com/thread/1677109
Once you have created a file based even in CMC > Events> System Events and made a work around program to delete the file once the event is trigged all you would need to do in webi is in launchpad just schedule > Events > select the file based event from all available system events. Here is a screenshot how to make a report run based on a event..

Schedule a Webi report to multiple folders in BOXIR2 InfoView

Hi All Expert,
I might need your kind advice on what is the alternative way to do the below in BOXIR2 InfoView.
In my InfoView, i have several sub-folders under one folder. For eg, i have one "Sales" folder which contained multiple sub-folders as "SG", "CHI", "MYS", "JPN" and etc. I have one webi report created which have a country name prompt in the report and exported to each different sub-folders which the report prompt have been selected for each country name before export to the sub-folder. Eg, "SG" sub-folder have a webi report with "Singapore" as country name in the folder. All of the sub-folder's report are using the same webi report design.
My problem now is i need to open each of the webi report in the sub-folder to everytime when i need to perform a schedule or perform changes on the report design. If i have 12 sub-folders, i need to open 12 times to perform changes one by one or schedule the report to run one by one.
Are there any other alternative way to schedule one time then BO will copy the relavant report or instance to the multiple folder?
Appreciated your kind advice.
Regards,
Chee Koon

Hi
a publication object allows you to schedule X webi reports (which reside in several subfolders in your system) at once.
If you want to first to create/overwrite copies of your report in X subfolders and then schedule them all at once then you have to go with the SDK (even in BO XI 3.x)
You can find more information about the SDK here: http://www.sdn.sap.com/irj/boc/sdklibrary
Regards,
Stratos

Error when executing function in MSS launchpad report ???

In MSS lanchpad report, we have the following problem:
Error in Manager Sef-Service
When calling the report, the following error occurred:
System: HRP
Error when executing function
Basically in MSS report, I select employees in the first iView which calls another ABAP query in back-end to display back-end t-code inside iView of portal through ITS service. What could be the reason for it? please advice.
Thanks,
Anthony

Please try converting the standadrd-delivered scenario RPT0, then check
out the things.
Also problem may be that your function code names contain
the character '&'. This causes a problem when the selected function
code is passed to the ITS-WebGUI as a URL parameter. Please use only
standard characters (A..Z and _) when you define a function code.
Then it should work.
Please go through the following link also
http://help.sap.com/saphelp_erp2005vp/helpdata/en/3a/
3198408d953154e10000000a1550b0/frameset.htm
Please test in backend using Se38 > PWPC_RPT_START_REPORT_TEST
The Reporting Iview in the portal has the Report category type, by
the report category type is set to "RPT0". Therefore, when the
application is launched, the reporting category type is also sent as URL
parameter to the backend system. As of ECC 6.0 only the reporting
category type "RPT0" is supported. ensure this is set for your custom reports if you are using own scenarion
then set in the Iview property of reports as well
ie example
1)Change the Iview property "Scenario" of the Reporting iview from
"RPT0" to your own "ZRPT", than this set of reports will work. however,
the standard reports will not work.
pwpc_convert_mdt_to_lpa >>
The following list of reports have been converted.

Error when trying to refresh the current report-Invalid prompt def.WIS00005

I am trying to create a Webi report using a Universe created with Universe Design Tool 4.0. I have created a new universe with a secured relational connection from a cube in our BBD system. The Universe can be created and exported in UDT (and when I test the connection, I get a message saying the server is responding). I can see values for the BEx query in BEx analyzer.
When I open Webi and connect to a universe, I can see the universe, but when I put a dimension to our results tab and go to "run query", I first get the error "Error when trying to refresh the current report". If I close this error I get the error "Invalid Prompt Definiton - WIS00005". Has anybody else had this issue and if so, where can I begin to troubleshoot the error?

Hi,
Please note that if the object parses at Universe level it may still fail at runtime especially for the prompts.
If you still experience the error after applying Patch 11 please analyze the characteristics of the prompt, get some trace logs with High level of detail, they surely will help.
Thanks!
Best regards,
Simone

Error when try to schedule a Webi Report

Similar Messages

Maybe you are looking for