Error when trying to use FaceTime on MacBook Pro with OS X Lion

I have been trying to use Facetime on my MacBook Pro that has OS X Lion, and I keep on getting an error that reads:
"The server encountered an error processing registration. Please try again later."
Can anyone help me out with the fix to this error?
I already deleted the one key with no author from the keychain access.
Thank you!

AirPlay Mirroring requires a second-generation Apple TV or later, OS X 10.8 or better and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). You can see which Mac you have and which operating system you are using by selecting 'About this Mac' from the Apple menu in the top left corner of your Mac and selecting the 'More Info' button.

Similar Messages

  • Error when trying to use FaceTime

    facetime previously worked fine on my daughter's macbook pro with lion, now when opening facetime it asks for the password, flashes verified for a second, then gives this error: 'the server encountered an error processing registration, please try again later". don't even know why it's trying to process registration and if it helps, facetime is working fine on my macbook pro on the same wifi network and it's working fine on her iphone, again on the same network. thanks for any help.

    thanks as always for the help. from the first section of troubleshooting it says
    "Verify that FaceTime is enabled in FaceTime > Preferences.
    If the issue persists, or if you see the message "Waiting for Activation", try toggling FaceTime off and then on."
    but with face time open preferences is greyed out and unselectable, so i can't even proceed from there. i also checked the date and time, it was fine.

  • Error when trying to use (GUI Wizards) on Table with BLOB, CLOB columns.

    I enjoyed watching the demo of ODP.NET/VS 2005 Environment where you can just drag the new command builders, data sets, etc.. but when I try this with a table that contains a BLOB and CLOB column it returns an error and basically cannot build the SQL needed to process these field types.
    I would assume it could do this natively since it is somewhat of a primitive type. I also tried to point it to a Stored Proc that returned a blob and it caused an error when building the SQL.
    So it appears it is not possible to use the GUI data access wizards for these column types. I can use them in code with the ODP.NET with no problems but it would be nice to be able to utilize the GUI Command Builders, etc...

    blob and clob are not supported i guess. oracle is a bit sluggish when it comes to VS and MS products!

  • Server encounters and error when using FaceTime on MacBook Pro but not while using on iPad

    Whenever I try to use FaceTime on MacBook Pro, it tells me "the server is encountering an error processing registration, please try again later".   It also says that I have the option to create a new Apple ID account in order to use FaceTime.
    I don't want to create a new account, because I currently use the same account on my iPad.  Is there something that I'm doing wrong, since I use FaceTime on my iPad mini now?

    Hey there career change,
    It sounds like you are unable to sign into FaceTime on your Mac, but on your iPad it works fine. I would use the troubleshooting steps in the following article about FaceTime for Mac:
    FaceTime for Mac: Troubleshooting FaceTime
    http://support.apple.com/kb/ts4185
    Ensure that you have an active Internet connection.
    Verify that you are using a valid Apple ID at appleid.apple.com. You can also create an Apple ID or reset your password from this website.
    Check that your email address is verified in FaceTime > Preferences.If FaceTime > Preferences shows your email status as "verifying," follow the instructions in the verification email that was sent to complete the process.
    Toggle FaceTime off and on in FaceTime > Preferences.
    If still unable to Sign In follow the instructions in FaceTime, Game Center, Messages on OS X: Troubleshooting Sign in
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • TS3367 When trying to use FaceTime I can't because it says it is turned off in settings, it then ask do I want to turn it on , tap for yes and it sits there spinning. Face time is on in settings?

    When trying to use FaceTime I can't because it says it is turned off in settings, it then ask do I want to turn it on , tap for yes and it sits there spinning. Face time is on in settings?

    Have you tried signing out of your Apple ID, restart the iPad and then start all over again?
    Go to Settings>iTunes & App Stores>Apple ID. Tap the ID and sign out. Restart the iPad.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Then go back to Settings>iTunes & App Stores>Apple ID. Sign in again. Then go to Settings>FaceTime>On. See if it will stay turned on and it it does, sign in and setup.

  • "500 internal server error" when trying to use F4 help in the variable sele

    Hi Experts,
    I am getting "500 internal server error" when trying to use F4 help in the variable selection screen (in WAD).
    How could this be resolved?
    Quick reply would be very helpfull.
    Thanks in advance !!

    It seems you are using wrong client ID. Make sure your logon pad has right details. You should verify this with your basis team.
    If the problem persists then try re-installing. But before you do that you can execute sapbexc.xla which is in the c:\program files\sap\bw. Type c:\ in cell c3 and click "start button". Any red flag means you have wrong version dll/ocx on your local drive, in that case you should reinstall with right patches.
    if this solution helps u then pls assign points

  • Runtime error when trying to use Thinkvantage system updater

    I get a runtime error when trying to use the Thinkvantage system updater.Have tried it numerous times and this is the exact message:
    "Runtime error!
    Program:C:\Program Files\Lenovo\System Update\tvsu.exe
    This application has requested the Runtime to terminate it in an unusual way.
    Please contact the application's support team for more information."
    Can somebody please help me to get the Thinkvantage system updater working properly?
    Thanks-George
    This issue has since been resolved.Thanks-G

    I'm getting the same error.   I tried reinstalling system updater but it didn't help.

  • Why do I get this error when trying to use my bluetooth headset as a listening device? There was an error connecting to your audio device. Make sure it is turned on and in range. The audio portion of the program you were using may have to be restarted.

    Why do I get this error when trying to use my bluetooth headset as a listening device? There was an error connecting to your audio device. Make sure it is turned on and in range. The audio portion of the program you were using may have to be restarted.

    I may have already resolved this issue buy removing the device from my computer and re-pairing it. It is currently working just fine.

  • I get the following error when trying to use the itunes store "your apple id has been disabled"

    I get the following error when trying to use the itunes store "your apple id has been disabled".  My account was disabled when someone else had been using it without my knowledge.  I changed my apple id password and the apple id is still fine, but itunes has it disabled.  I verified that the computer is authorized for this apple id.  What to do now?

    Welcome to the Apple Community.
    Contact Apple through iTunes Store Support

  • I´ve just changed my apple id password, and when trying to use Facetime, after having entered such new password, it won´t fullfill the calls, nor can I receive incoming calls, it simply gets disconnected. What do I do??

    I´ve just changed my apple id password, and when trying to use Facetime, after having entered such new password, it won´t fullfill the calls, nor can I receive incoming calls, it simply gets disconnected. What do I do??

    iOS: Troubleshooting FaceTime                  
    Unable to make or receive FaceTime calls after April 16, 2014
    Using FaceTime and iMessage behind a firewall
    iOS: Troubleshooting FaceTime and iMessage activation
    iOS: Using FaceTime                               
    FaceTime, Game Center, Messages: Troubleshooting sign in issues

  • TS1398 Hi all since updating to ios 6 when trying to use facetime I keep getting connection lost and no ringing tone has Apple got a fix for this issue

    Hi all since updating to ios 6 when trying to use facetime I keep getting connection lost and no ringing tone has Apple got a fix for this issue

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
    http://tinyurl.com/32drz3d
     Cheers, Tom

  • When trying to Airplay from my Macbook Pro Retina, to AppleTv3 it plays for only a few minutes, and then jumps back to the Mac. It seems to do this no matter what I play, music, movies or pictures. I just bought a new router. This could affect it

    When trying to Airplay from my Macbook Pro Retina, to AppleTv3 it plays for only a few minutes, and then jumps back to the Mac. It seems to do this no matter what I play, music, movies or pictures. I just bought a new router. This could affect it.
    I have been playing whole movies before from VLC without problems.
    Any Ideas?

    Welcome to the Apple Community.
    Yes it's network issues or settings that cause these types of problems most of the time.
    The following article(s) may help you.
    Troubleshooting AirPlay
    Troubleshooting Wi-Fi networks and connections
    Recommended Wi-Fi settings
    Wifi Diagnostic Software (for Mac users)
    You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.

  • I can no longer shoot directly into phaseone software since i use my new macbook pro with retina display. pictures are not transfered from the camera into captureone. anyone else with this problem? any solutions?

    i can no longer shoot directly into phaseone software - neihter version 6 or 7 - since i use my new macbook pro with retina display. pictures are not transfered from the camera into captureone. anyone else with this problem? any solutions?

    My eyes just glazed over...Please in the future break down each of your issues with paragraphs separated by two carriage returns. It would be much easier when trying to address your issues.
    Go to Apple menu -> System Preferences -> Keyboard and Mouse -> Mouse
    And edit your mouse settings to do what you want it to do.
    Secondly, this is not the place to vent. If you have a complaint, there is:
    http://www.apple.com/feedback/
    or http://www.apple.com/contact/
    We are just end users here helping other end users.
    Third, from my understanding, it would appear you are concerned about the noise the hard drive makes when it falls asleep? Why not put your machine in screen saver mode instead? Apple menu -> System Preferences -> Energy Saver turn off all Energy Saver settings, or set them to run Never.
    Fourth, if your machine was purchased just a few days ago, you may still be able to get an exchange from the store, quicker than you can get a repair done. You may want to look into that possibility.
    Fifth, it does appear you found the Logic forum. I would persist in asking there how to solve your technical issue with Logic regarding the audio. It may be you don't have to do anything special to the hard drive. Remember audio can be transmitted by wire, avoiding ambient sounds.
    Good luck!

  • HT2499 I have a new MacBook Pro with OS X Lion 10.7.4. The DVD player does not have a feature to store film clips. Why? This is useful for my work and I had it on my older computer? Why the loss of capacity?

    I have a new MacBook Pro with OS X Lion 10.7.4. The DVD player does not have a feature to store film clips. Why? This is useful for my work and I had it on my older computer? Why the loss of capacity?

    I cannot recall the DVD player ever being a place to "store" videos - it is simply an app to play videos.
    If your machine is new, then iMovie should be included as the "shrunk" version of iLife is included with Lion (iMovie, Garageband, and iPhoto). However, iMovie is not a place to store videos either - it is a video editor. You import your clips and edit them in order to then burn to a DVD or share via a social media site.
    Have you considered simply dragging the clips to your folder "Movies"? That would be a great place to just store them (please be aware that videos are usually large files, so keep your hard drive space in mind so you keep a minimum free and available for the OS to operate properly):

  • Why do I lose my text layer in AE when gpu ray trace rendereing? Macbook pro with retina and latest

    why do I lose my text layer in AE when gpu ray trace rendereing? Macbook Pro with Retina and latest AE update.
    Any new text layers disapear also as soon as the 3d box is checked.  Solid layers do likewise.  The text is available in fast draft mode but is not present in a final render. 
    Adussting the number of "rays" makes no difference.
    No one else seems to be having this problem with ther macbook pro with retina ( on internet).
    What silly mistake am I making???????????
    If I start the project in CPU ray trace all is fine.  If after the problem develops in GPU I change back to CPU I DONT get them back!!!!!
    I just reset the AE preferences - no help.

    Go through this thread :
    http://forums.adobe.com/message/4749742
    You might get your answer.

Maybe you are looking for