Error when using MySQL view that has name greater than 30 characters
Hi, am loading MySQL data to an Oracle table using an ODI 11g Interface.
The interface errors when the name of the MySQL view exceeds 30 characters. A "view not found" error is encountered.
Is there any work around when using source datastores (MySQL views in this case) where the datastore name exceeds 30 characters, other than renaming the MySQL view to have a max 30 character name?
Thanks,
Kevin L.
I believe that mySQL supports upto 64 characters in table name. You need to update the ODI 11g Topology -> Physical Architecture -> Dbl click MySQL -> Goto Advanced tab and update the "Maximum table name length". By default that is setup to 30.
Similar Messages
-
Error when using Analytic view with Input Parameters
Hi,
I am trying to create an info space based on my Analytic view which has input parameters. The infospace is validated and indexed without any issue. However when I ran the view, I get an error (50011) as it is unable to fetch any results. I tried using an infospace based on Calculation view with input parameters and the explorer view works without any issue.
Has anyone faced similar issues?
We are using HANA SP 6 rev 67 and BI 4.0 SP 4.
Also is there a way to enable input prompts for the users when they refresh the BO Explorer view? If not currently available is there any work around ?
ThanksHello George,
I don't have any personalization set on the info space. Also I am using mapped Account in BI to connect to HANA. The confusing part is that it is able to validate the infospace with the input parameters and index it. However query does not return any results. I even tried running the same query which explorer sends to HANA in the SQL editor and there too the same results,the query does not return anything. The model does return data when I do a data preview and if accessed from other tools like AAO.
Also when I use SSO connection to HANA, indexing of the infospace fails. Where can I see the error log?
Thanks, -
Hi Folks,
I m getting this problem frequently when i m using table view in reports. Im using SQl server2008 and working on BIApps.
View Display Error
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 16001] ODBC error state: 28000 code: 18456 message: [Microsoft][ODBC SQL Server Driver][SQL Server]Login failed for user 'DWH'.. (HY000)
SQL Issued: SELECT 0 s_0, "Financials - AP Overview"."Time"."Fiscal Quarter" s_1, "Financials - AP Overview"."Time"."Fiscal Year" s_2, "Financials - AP Overview"."Facts - AP Turnover"."Days Payables Outstanding" s_3 FROM "Financials - AP Overview" FETCH FIRST 65001 ROWS ONLY
Thanks in advance.
Raghava.Hi,
As per you query shown above, I am assuming that the query limit exceeds the maximum number of rows to show in your result. because it showing only 65001 rows fetched but your data may be more than that.
So try to extend the maximum rows for table view in instanceconfig.xml file.
Regards,
Pandian -
Error when using Smart View install link in Workspace
Hi All,
We recently decidely to use Smart View 11.1.2.5, instead of 11.1.2.1.
In order to role out the file to our users we need to update the link in Workspace. I did so, copying the new .exe and version.xml file to our server that houses workspace, in file path Oracle/Middleware/EPMSystem11R1/common/epmstatic/wspace/SmartView. I then removed the old files. Now when I login to HFM and go to the link, after a period of a few minutes I get the error "unable to find a version of the runtime to run this application."
I tried restarting all services, a dead end.
Does anyone know what needs to be done to fix this error?
Thank you in advance.
BrianYes, this is frustrating. You need .NET Framework 4.5 installed to be able to download and install from Internet Explorer. As per usual Firefox does not suffer from this and allows you to download the installer and save locally, no bother.
Please mark if helpful,
Andy. -
Hello.
When I view the XML URL I can see it fine but when I use it as the "XML Link" in an "XML Viewer" I get an error.
The URL I used (with GUID removed):
http://www.company.com/sites/SPSite/_vti_bin/owssvr.dll?Cmd=Display&List={...}&View={...}&XMLDATA=TRUE
The error:
Cannot retrieve the URL specified in the XML Link property. For more assistance, contact your site administrator.
I cannot figure it out. Any ideas?To get access to SharePoint Web Service – owssrv.dll, You need to -
Provide anonymous access for the web application and list & libraries section at the site collection
Web application pool account should be a part of WSS_WPG, ISS_WPG and WSS_ADMIN_WPG
Please check -
http://sharepointknowledgebase.blogspot.ru/2011/11/cannot-retrieve-url-specified-in-xml.html#.VQJ8xvmUeAk
Thanks
Ganesh Jat [My Blog |
LinkedIn | Twitter ]
Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful. -
Hi All,
I have a list with few items. If I break role inheritance for at least one item and try to open list view page, I receive this error:
Attempted to use an object that has ceased to exist. (Exception from HRESULT: 0x80030102 (STG_E_REVERTED))
This occurs only if view has GroupBy in query. If I remove grouping from view, then error disappears. But I need to have grouping in view as well as item level permissions.
How can I achieve this? Is this some limitation?
Any help will be appreciated.
The full stacktrace:
System.Runtime.InteropServices.COMException: Attempted to use an object that has ceased to exist. (Exception from HRESULT: 0x80030102 (STG_E_REVERTED))
at Microsoft.SharePoint.Library.SPRequestInternalClass.GetListContentTypes(String bstrUrl, String bstrListName, ISPDataCallback pXMLCallback)
at Microsoft.SharePoint.Library.SPRequest.GetListContentTypes(String bstrUrl, String bstrListName, ISPDataCallback pXMLCallback)
System.Runtime.InteropServices.COMException: Attempted to use an object that has ceased to exist. (Exception from HRESULT: 0x80030102 (STG_E_REVERTED)),
StackTrace:
at Microsoft.SharePoint.SPContentTypeCollection.FetchCollection(IList`1 exceptions)
at Microsoft.SharePoint.SPList.get_ContentTypes()
at Microsoft.SharePoint.SPCustomActionElement.QueryForToolbarButtons(SPWeb web, SPList list, SPListItem item, PAGETYPE pgtype)
at Microsoft.SharePoint.SPCustomActionElement.AddCustomToolbarButtons(SPWeb web, SPList list, SPListItem item, SPContext renderContext, PAGETYPE pgtype, ToolBar toolbarControl, WebPart webPart, Page page)
at Microsoft.SharePoint.WebControls.ViewToolBar.CreateChildControls()
at System.Web.UI.Control.EnsureChildControls()
at Microsoft.SharePoint.WebControls.TemplateBasedControl.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.AddedControl(Control control, Int32 index)
at Microsoft.SharePoint.WebPartPages.DataFormWebPart.CreateChildControls()
at Microsoft.SharePoint.WebPartPages.XsltListViewWebPart.CreateChildControls()
at Microsoft.SharePoint.WebPartPages.WebPartMobileAdapter.CreateChildControls()
at System.Web.UI.Control.EnsureChildControls()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error)
at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb)
at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus)
at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)Does the site use any custom code? Not necessarily the task list but can be anywhere. If yes, ensure that current context SPWeb/SPSite objects are not being disposed off.
This post is my own opinion and does not necessarily reflect the opinion or view of Slalom. -
XSLT List View Web Part Error when Using Group By
I have a Tasks List created a tasks list in SharePoint. The Tasks (normal OOTB template) list works fine in the normal view, however, I have created an XSLT ListView Web Part that points to this tasks list. When I set the web part to display
a view with a "Group By" rule, it returns an error:
"Attempted to use an object that has ceased to exist. (Exception from HRESULT:
0x80030102 (STG_E_REVERTED))
The list has just over 1000 items and the threshold is set to 5000, I have tried indexing the column that I am "grouping by" just in case and that has not worked.
Has anyone experienced this issue before? If so, what steps can be done to display the XSLT List View Web Part properly?Thank you for the response. I tried the above link and it didn't seem to solve the issue; in fact, when I clicked on Common Control Tasks there wasn't any Data View Tasks such Filter and Sort & Group.
Perhaps some more information would shed light on a solution. I created a list template including content of the task list in question. I was able to display the new list in an XSLT List View Web part with grouping enabled. However, I noticed that
the "Related Content" column was completely empty (it was there, it just had no data in each row). What is the source of this Related Content? I know it is a system column that appears when Workflows generate the item in the list but could it be the
reason for the Web part being unable to display with groupings? -
List Views displaying error - when using Lookup column for filtering ( which are indexed )
I'm trying to filter a large list that has more items than the list view threshold. The list has a lookup column that is indexed. If I try to filter by other columns, the view works fine as long as it returns fewer than 5,000 items. However, if
I try to filter by the lookup column, I get the error about not being able to display the items because the list is too large.
The views are returning items which are less than threshold value , but still I am seeing the same issue.I Created some pages and added this filtered views to the pages it is showing below error
This view cannot be displayed because it exceeds the list view threshold ....
IF I navigate the view in the list it's returning zero records with out any error page . But no records.
Is there a known issue with filtering large lists by lookup column? Any other troubleshooting suggestions? Everything I'm doing here is through the web interface.Thank you for your reply. Yeah it’s default limit. But when I created view based on some filter condition on lookup column it’s not working.
For example:
Created a View based on Lookup column DEPT using filter condition Dept = HR , returned 1400 items
Created another View based on Lookup column DEPT using filter condition Dept=Admin , returned 3600 items
Adding this list view webparts to the page also working fine , displaying the results .
After adding one item to this list , both the views are not displaying any results. Now the count is 5001.(it exceeded the list view threshold)
The page where the list view web parts are added throwing the below error.
This view cannot be displayed because it exceeds the list view threshold (5000 items) enforced by the administrator.
To view items, try selecting another view or creating a new view. If you do not have sufficient permissions to create views for this list, ask your administrator to modify
the view so that it conforms to the list view threshold.
Learn about
creating views for large lists.
I am experiencing this problem only with lookup columns, Choice and site columns are working fine in this same situation .
Thanks, -
CF9 Admin Error when using 'View Undelievered Mail'
When using the 'View Undelieverd Mail' button in the CF9 Admin Mail page I get the following alert box error:
Error invoking CFC /CFIDE/administrator/mail/undeliveredmail.cfc: Client verification failure.
Accepting the dialog box then loads the page with the standard CF error with this:
Client verification failure.
You must have a valid login to access this page.
Resources:
Check the ColdFusion documentation to verify that you are using the correct syntax.
Search the Knowledge Base to find a solution to your problem.
Browser Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.2; Trident/4.0; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)
Remote Address 127.0.0.1
Referrer http://localhost/CFIDE/administrator/mail/undeliveredmail.cfm
Date/Time 02-Aug-11 01:09 AM
Anyone else have this problem or how to correct it? I think it may be due to the latest hotfix.Hello
>I have to think (pure speculation) that this is also related to the recent update as there was a previous problem with the update causing datasources to not verify with an authentification issue as well.
Agree since View Undelivered Mail works for me on a CF9.0.1 system and also CF9.0.1 with CHF1. I think one of the patches contained in http://kb2.adobe.com/cps/907/cpsid_90784.html is the cause as View Undelivered Mail fails for me on hf901-00002.jar updated server.
Pending what other forum posters say suggest log issue on http://cfbugs.adobe.com/
>I like CF alot ...but the update and patch process has always sucked.
Ditto. I hear patching is going to improve in CF X / 10 / Zeus.
Cheers, Carl. -
Intermittent error when using the Disco Viewer client
Hi, I have a user receiving the following intermittent error when using the Discoverer Viewer client:
“The application encountered an invalid state.
- Discoverer Beans XML Exception. Method: findNode Class: XMLUtils Error: Cannot find parent node. Parent element does not exist in XML document, looking for database_account/eul
OracleBI Discoverer Viewer was unable to find the necessary data for displaying the results of this event. Please correct any errors and try again.”
Any idea what this might be? Any help or direction would be very much appreciated! Thank you!Hello
Is this related to a single machine or common to a single report or is it purely random?
I did a search on your behalf and came up with nothing related to this error. You may therefore need to raise the problem with Oracle Support.
Just out of curiosity which version of Discoverer are you using?
Michael -
Broken Pipe Error when using database link
We are using WebLogic 6.1 sp2 / oracle database 8.1.6. / thin drivers.
The connection works fine, unit I try to access a view that has a union and db links
in it.
We have used one or the other (view or a dblink) and it works, but when used together,
we get broken pipe error.
I haven't proven that this is the cause, I will try to setup a test, but I was wondering
if this is a known issue or what ??
thanks
RichYou need to create the catalog views that support distributed SQL in your remote database (the database you connect to via db_link).
To create these views, connect "/ as sysdba" and run:
$ORACLE_HOME/rdbms/admin/catproc.sql
which will in turn call several other scripts including: $ORACLE_HOME/rdbms/admin/catrpc.sql (which creates your missing view)
It is best to run the whole catproc.sql script (and not just the catrpc script).
You can run and rerun catproc.sql several times quite safely.
Cheers -
Weblogic 9.2 error when using spring framework and taglibs.
I am getting the following error when using spring binding for a command form class.
Class ExCommandForm
private String firmCode;
public String getFirmCode ()
public void setFirmCode ()
In my jsp I have the following
<spring:bind path="exCommandForm.firmCode">
<input name="<c:out value="${status.expression}"/>" type="text" value="<c:out value="${status.value}"/>" >
</spring:bind>
Ps. exCommandForm is the commandForm declaration in my SiimpleFormController.
When I deploy the application to weblogic 9.2 I get the following error :
<Apr 26, 2007 4:34:44 PM BST> <Error> <HTTP> <BEA-101017> <[weblogic.servlet.int
ernal.WebAppServletContext@1f601c6 - appName: 'BDRui', name: 'BDRui', context-pa
th: '/BDRui'] Root cause of ServletException.
java.lang.ClassCastException: javax.servlet.jsp.jstl.core.LoopTagSupport$1Status
at jsp_servlet._web_45_inf._jsp.__tradesearch._jspService(__tradesearch.
java:1075)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run
(StubSecurityHelper.java:225)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecuri
tyHelper.java:127)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.jav
a:283)
Ps. Deploying application on Tomcat 5.23 works.
Can anyone help on this ?
cheers in advance.
More Info - Using Weblogic 9.2 on UNIX, servlet 2.4, jstl 1.1
regards
Edited by kings_citi at 04/26/2007 9:03 AM
Edited by kings_citi at 04/26/2007 10:35 AM
Edited by kings_citi at 04/26/2007 10:36 AMThe problem doesn't look like it has anything to do with wappers per se. The stack indicates that the JVM died when the persistent store tried to invoke a standard Java synchronize operation. JVM crashes need to be analyzed by a JVM expert, so I second the suggestion to solicit help from JVM experts and/or filing a case with customer support. In the mean-time, you can probably work-around the issue by either (A) ensuring you have a recent version of the JVM installed, or (B) temporarily switching to the Sun JVM.
Regards,
tom
Edited by: TomB on Sep 17, 2010 2:33 PM -
Help: Error when using LSMW (Recording Object Type)
Dear all,
I encountered an error when using "Batch Input Recording" way in LSMW,which is as follows:
I have recorded the transaction MM01 and the source structure and data mapping.When dealing
with "Specify Files",the error comes out with message
--> "File Name 'Converted Data':Max.45 Characters:Remaining saved".
and the subsequent steps cannot be maintained due to the error.Alex,
The name of file for Converted data is a system generated combination of your Project subproject and object followed by lsmw.conv as Project_Subproject_Object.lsmw.conv
System has set a limit of a maximum of 45 characters. It the file name exceeds 45 characters, the system will throw the error.
Just rename the file such that it is with in the 45 charcter limit....you will be fine
Hope this helps
Vinodh Balakrishnan -
Chuckwagons post - error when trying to view
In trying to view chuckwagons post, "just received my new iMac 2.1" (http://discussions.apple.com/thread.jspa?threadID=319765&tstart=0), I keep getting an error. It just says an error has occurred and we apologize for the inconvenience. However, I notice that new posts are being added so some folks are able to read and post. Is anyone else getting an error when trying to view this post? I've tried Safari, Firefox and IE. I'm trying to make up my mind as to which iMac I want - G5 or Core Duo. Right now I'm leaning towards the G5 and it would be nice to be able to see what chuckwagon has to say.
Eric S.
Mini 1.25, 512MB RAM, 80GB HD Mac OS X (10.4.4) G4 DA 533MHz DP w/Giga dual 1.8GHz upgrade, 1.25GB RAM, Radeon 9600 ProThis is really beginning to tick me off. There has been another post to chuckwagons message and a lot more views. However, I am still getting the same error that I've been getting since yesterday. And it doesn't matter which computer I'm using, the result is always the same.
Arrghhh!!
Eric s.
Mini 1.25, 512MB RAM, 80GB HD Mac OS X (10.4.4) G4 DA 533MHz DP w/Giga dual 1.8GHz upgrade, 1.25GB RAM, Radeon 9600 Pro -
Custom Report Erroring when using All as parameter
Hi All,
I am facing a problem in running custom report.
=> DB Server Info
RDBMS : 11.2.0.2.0
Oracle Applications : 12.1.3
I am getting following error.
REP-1401: 'afterpform': Fatal PL/SQL error occurred.
ORA-06502: PL/SQL: numeric or value error
custom report two parameters one is date parameter and name parameter
date parameter is using as fnd_date.canonical_to_date(:P_EFFECTIVE_DATE) in queries.
if I give name parameter for individual, then it works fine.
if I give name parameter as "All", then its erroring. I tried it in my best way, but its not working.
variable data length increased though its not working, can any one help me on this please....
Here is the Afterpform code
function AfterPForm return boolean is
lName VARCHAR2(5000); -- its changed from lName varchar2(50);
begin
IF :P_NAME <> 'All' THEN
lName:= 'AND name =:P_NAME';
ELSE
lName:='AND name in (select name from <******>
order by name
END IF;
:P_Where_Clause := lName;
return (TRUE);
end;
Thanks for all your help so far.
Ram.
Edited by: user8822881 on Feb 9, 2012 10:43 AMexcuse i understood that you use All as parameter name
ORA 6502 is when you assign a char to a number or when assign a value which length is greater than the variable length
what's the dimension of p_where_clause for example?
you can trace with srw.message
--- <Code>
function AfterPForm return boolean is
lName VARCHAR2(5000); -- its changed from lName varchar2(50);
begin
srw.message(1,'step 1');
IF :P_NAME = 'All' THEN
srw.message(2,'step 2');
lName:='AND name in (select name from <table>
order by name
srw.message(3,'step 3');
ELSE
srw.message(4,'step 4');
lName:= 'AND name =:P_NAME';
srw.message(5,'step 5');
END IF;
srw.message(6,'step 6');
:P_Where_Clause := lName;
srw.message(7,'step 7');
return (TRUE);
end;
---</Code>
i think your query is not good
for example
lName:= 'AND name =:P_NAME';
when instance the query the query search this condition but no use the value of p_name parameter
write
lName:= 'AND name = '||''''||:P_NAME||''''; then :p_name take the value
Maybe you are looking for
-
When I first got my MacBook Pro my wireless network at home (Linksys Wireless Router) popped right up and I entered the password and had no problems automatically connected after that. I went to a friends house this weekend who also has a wireless ro
-
I have an iPhone 4S and it has been stuck in recovery mode for whatever reason. I have tried using data recovery software that can turn my phone to normal mode but when it tries all my phone does in turn off and then on again, back into recovery mode
-
Hi all, I have an old G4. I want to make it my home media center. So I meed to connect it to my cable content provider in one hand and to my HDTV on the other. I want to record TV shows and movies as well as to save all my Audio and video content and
-
in OC4J,I write a XSLT as follows: <xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.1"> <xsl:strip-space elements="doc chapter section"/> <xsl:output method="xml" encoding="GBK" indent="yes"/> <xsl:template match="doc"> <ht
-
I recently acquired a Zen Xtra and have been having problems changing music. I cannot copy any new music onto the dri've and when I erase the music that is there, it works well until I have to do a cold start at which time the player reverts to what