Error while calling applet from Javascript via LiveConnect and WebDriver

Hi all,
I am trying to call applet Java code from Javascript via WebDriver.
Given the following two cases:
- calling a static method: Integer.parseInt("42")- constructing a new object: new String("Hello world")My Javascript code looks like this:
document.appletId.Packages.java.lang.Integer.parseInt("42");
new document.appletId.Packages.java.lang.String("Hello world");When executing this code in Firefox via the Firebug Javascript console everything works fine and I get the expected results. However, when executing this code via the JavascriptExecutor from WebDriver only the call to the static method succeeds, the construction of the new object leads to the following error: "Attempt to call a default method on object with no invokeDefault method."
I don't have any idea what is going wrong here, so any help would be greatly appreciated.
Thanks!

Hello Gerard, Hello Krishna,
-> The liveCache application failed with COM error::
                               40028 Illegal timestamp in rough timegrid
More details about COM error 40028 you will see in TA /n/sapapo/om10
     -> Return code: 40028 -> execute ::
Invalid time stamp in the time buckets profile relation     
( om_ts_tgrelinvalidstamp )     
   < click on '?' mark >
-> Open an OSS message in accordance with SAP note 167280 if further help
     needed to solve the issue on your system.
Thank you and best regards, Natalia Khlopina

Similar Messages

  • Hi, my iphone 5 encountered an unknown error while updating to iOS 7 via itunes and is now stuck in recovery mode and prompts me to restore the phone when I connect it to itunes but then I would lose all my data. Any suggestions please?

    Hi, my iphone 5 encountered an unknown error while updating to iOS 7 via itunes and is now stuck in recovery mode and prompts me to restore the phone when I connect it to itunes but then I would lose all my data. I DO NOT have any back ups on itunes. Is there anyway to get out of recovery mode without restoring or recover data after a restore?
    Or any other suggestions please? Thanks

    As pdroth said, you should have gotten a backup made when you started the update of iOS. If you cannot find a backup, and the phone is in recovery mode, there are no futher suggestions to make. To get the phone working again you have to restore. You cannot force a backup at this time since it is already in recovery mode. It will not allow anything else but a restore at this point.

  • Error while loading javaGUI from BSP via Applet

    Hello Folks,
    i saw an interesting Thread by Thomas Jung (SAP) how to starting a R/3 Transaction via javaGUI from a Business Server Page. I did the same steps but get an Java Error while loading the applet. Can anyone help me?
    The error listed in the JavaConsole is:
    java.security.AccessControlException: access denied (java.util.PropertyPermission com.sap.platin.productType read)
         at java.security.AccessControlContext.checkPermission(Unknown Source)
         at java.security.AccessController.checkPermission(Unknown Source)
         at java.lang.SecurityManager.checkPermission(Unknown Source)
         at java.lang.SecurityManager.checkPropertyAccess(Unknown Source)
         at java.lang.System.getProperty(Unknown Source)
         at com.sap.platin.micro.Version.guessVersionType(Version.java:230)
         at com.sap.platin.GuiAppletBase2.findProductType(GuiAppletBase2.java:324)
         at com.sap.platin.GuiApplet2.getProductType(GuiApplet2.java:18)
         at com.sap.platin.GuiAppletBase2.<init>(GuiAppletBase2.java:54)
         at com.sap.platin.GuiApplet2.<init>(GuiApplet2.java:14)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
         at java.lang.reflect.Constructor.newInstance(Unknown Source)
         at java.lang.Class.newInstance0(Unknown Source)
         at java.lang.Class.newInstance(Unknown Source)
         at sun.applet.AppletPanel.createApplet(Unknown Source)
         at sun.plugin.AppletViewer.createApplet(Unknown Source)
         at sun.applet.AppletPanel.runLoader(Unknown Source)
         at sun.applet.AppletPanel.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    All Jar-Libraries are imported in the Application Mime-Repository...and regardless the JavaGUI is installed on my local host or not, i get the same error...
    Thanks in advance for your help,
    Christian Kremer

    Hi,
    You can check the below forums.
    DTP with error RSBK257
    - Jaimin

  • Error while calling applet in HTML in SAP NWDS

    Hi,
    We have written a java code with Main method and we are trying to run it on web. So we have written another piece of HTML code where we are calling the othe program with applet. But getting below error.
    Below is exce[ption I am getting while running jree charts made in java :
    Java Plug-in 1.6.0_24
    Using JRE version 1.6.0_24-b07 Java HotSpot(TM) Client VM
    c: clear console window
    f: finalize objects on finalization queue
    g: garbage collect
    h: display this help message
    l: dump classloader list
    m: print memory usage
    o: trigger logging
    q: hide console
    r: reload policy configuration
    s: dump system and deployment properties
    t: dump thread list
    v: dump thread stack
    x: clear classloader cache
    0-5: set trace level to <n>
    java.lang.reflect.InvocationTargetException
    at com.sun.deploy.util.DeployAWTUtil.invokeAndWait(Unknown Source)
    at sun.plugin2.applet.Plugin2Manager.runOnEDT(Unknown Source)
    at sun.plugin2.applet.Plugin2Manager.createApplet(Unknown Source)
    at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
    at java.lang.Thread.run(Unknown Source)
    Caused by: java.lang.RuntimeException: java.lang.InstantiationException: org.jfree.chart.demo.BarChartDemo
    at sun.plugin2.applet.Plugin2Manager$12.run(Unknown Source)
    at java.awt.event.InvocationEvent.dispatch(Unknown Source)
    at java.awt.EventQueue.dispatchEventImpl(Unknown Source)
    at java.awt.EventQueue.access$000(Unknown Source)
    at java.awt.EventQueue$1.run(Unknown Source)
    at java.awt.EventQueue$1.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.security.AccessControlContext$1.doIntersectionPrivilege(Unknown Source)
    at java.awt.EventQueue.dispatchEvent(Unknown Source)
    at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
    at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
    at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
    at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
    at java.awt.EventDispatchThread.run(Unknown Source)
    Caused by: java.lang.InstantiationException: org.jfree.chart.demo.BarChartDemo
    at java.lang.Class.newInstance0(Unknown Source)
    at java.lang.Class.newInstance(Unknown Source)
    ... 15 more
    Exception: java.lang.reflect.InvocationTargetException
    Below is html code run to call applets :
    <!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "" title="http://www.w3.org/TR/html4/loose.dtd">" class="link">http://www.w3.org/TR/html4/loose.dtd">
    (http://www.w3.org/TR/html4/loose.dtd)
    <html>
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
    <title>Hello</title>
    </head>
    <body>
    <applet code=org.jfree.chart.demo.BarChartDemo archive="src.jar" width="320" height="120"></applet>
    </body>
    </html>
    Please suggest.
    Regards
    Agamani

    Hi,
    Though there are a lot of importing parameters, you should give only one structure for outtable, and read as index 1 and index 2.
    FORM GET_SPRAS TABLES intable   STRUCTURE itcsy
                                              outtable  STRUCTURE itcsy.
      DATA: lv_kunnr LIKE kna1-kunnr.
      CLEAR: GV_SPRAS.
      lv_kunnr = intable-value.
      CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
        EXPORTING
          input  = lv_kunnr
        IMPORTING
          output = lv_kunnr.
      SELECT SINGLE LAND1 SPRAS INTO (gv_land1, gv_spras) FROM KNA1
        WHERE KUNNR = lv_kunnr.
      IF sy-subrc = 0.
        READ TABLE outtable INDEX 1.
        outtable-value = gv_spras.
        MODIFY outtable INDEX 1.
        READ TABLE outtable INDEX 2.
        outtable-value = gv_land1.
        MODIFY outtable INDEX 2.
      ENDIF.
      IF gv_land1 EQ 'DE'.
        CLEAR: GV_LAND1,
               GV_SPRAS.
      ENDIF.
    ENDFORM.
    Edited by: Srinivas Kalluri on Mar 30, 2009 5:00 AM
    Edited by: Srinivas Kalluri on Mar 30, 2009 5:10 AM

  • XML Error while calling webservice from oracle function.

    I am getting an error while I am trying to call webservice from oracle function. Any ideas? Thanks.
    select get_new_string ('proxy:80', 'http://xxx/PatternVariations/SourceTest/WebMethods','Scott') from dual
    ERROR at line 1:
    ORA-31011: XML parsing failed
    ORA-19202: Error occurred in XML processing
    LPX-00225: end-element tag "H4" does not match start-element tag "P"
    Error at line 9
    ORA-06512: at "SYS.XMLTYPE", line 0
    ORA-06512: at "DORSBP00.DEMO_SOAP", line 82
    ORA-06512: at "DORSBP00.GET_NEW_STRING", line 11

    The error message implies that the web service is returning something that is not well formed xml. Can you verify what is being returned by the web service call

  • ESS throwing error while calling transaction from R/3

    Whenever u try to pull certain I-view like under ESS > Income tax provisional statement then the portal throws below mentioned error. Portal is not able to call transactions from R/3.
    Error:
    The requested URL could not be retrieved
    While trying to retrieve the URL: http://dev.mglep.com:26000/sap(ZT0yZElaRG5xNDlZdFF4aGcyTDhzMWxRLS1hVUR5bDBMbjBDZ2hWUUcyMlZmcmlBLS0=)/bc/gui/sap/its/webgui?
    The following error was encountered:
    Connection to 69.43.161.156 Failed
    The system returned:
        (111) Connection refusedThe remote host or network may be down. Please try the request again.
    Your cache administrator is root.
    Please help

    Hi,
    Please check the parameters that has been defined in SICF for the transaction you are using.
    With Regards,
    Kaustuv Goswami.

  • Error while calling webservice from application module

    Hi all
    I have generated a Proxy from a web Service and i am trying to call the web service from an Application Module it is throwing me error
    JBO-29000: Unexpected exception caught: oracle.classloader.util.AnnotatedNoClassDefFoundError, msg= Missing class: webservices.types.com.siebel.xml.order_interface.Orders Dependent class: java.lang.reflect.Array Loader: jre.bootstrap Code-Source: unknown Configuration: jre bootstrap
    Missing class: webservices.types.com.siebel.xml.order_interface.Orders Dependent class: java.lang.reflect.Array Loader: jre.bootstrap Code-Source: unknown Configuration: jre bootstrap
    My web Service is correct, as i have executed the client and it is working fine, but when i try to access the web service from an application module it is throwing me this error. So any light on this issue will be very helpful
    thanks

    This forum is for XML DB issues. XML DB is a feature of 9iR2 and later.You need t look in the XML Technology forum

  • 'ORA-12571: TNS:packet writer failure' error while calling procedure from VC++

    hi all,
    i am writing stored procedures and calling these from vc++. I have one stored procedure in that all
    in and out perameters are numeric. When i am calling these procedure i am able to get the values properly. But in another procedure one in perameter is varchar and one out perameter is varchar. When i am calling these procedure from vc++ the error i am getting is "ORA-12571: TNS:packet writer failure". I test my vc++ code on different computers but its giving the same errors. I think ora-12571 error is when i can't communicate with oracle. But other stored procedures(in and out perameters are numbers) and sql statements are running properly. Only these stored procedure which has in and out perameters as varchar is giving me the above said problem. My out perameter in this procedure strtax is of type varchar and the length 100. Is it the problem. Please suggest me how to over come this problem.
    thanks in advance,
    with regards
    vali.

    Hi
    We recently changed our load balancer to a new load balancer. we get this error only after the load balancer change.
    When the error occurs, I could see ORA-12571 error message only in the application error log. The listener.log has only the following message about TNS 12502. It does not have any message about ORA -12571.
    TNS-12502: TNS:listener received no CONNECT_DATA from client
    12-MAR-2010 12:23:26 * (CONNECT_DATA=(SERVICE_NAME=AppName)(CID=(PROGRAM=c:\wind ows\system32\inetsrv\w3wp.exe)(HOST=WEB02)(USER=NETWORK?SERVICE))) * (ADDRESS=(PROTOCOL=tcp)(HOST=172.x.x.x.x)(PORT=2202)) * establish * AppName * 0
    12-MAR-2010 12:23:26 * (CONNECT_DATA=(SERVICE_NAME=AppName)(CID=(PROGRAM=c:\wind ows\system32\inetsrv\w3wp.exe)(HOST=WEB02)(USER=NETWORK?SERVICE))) * (ADDRESS=(PROTOCOL=tcp)(HOST=172.x.x.x.x)(PORT=2203)) * establish * AppName * 0
    12-MAR-2010 12:23:26 * (CONNECT_DATA=(SERVICE_NAME=AppName)(CID=(PROGRAM=c:\wind ows\system32\inetsrv\w3wp.exe)(HOST=WEB02)(USER=NETWORK?SERVICE))) * (ADDRESS=(PROTOCOL=tcp)(HOST=172.x.x.x.x)(PORT=2204)) * establish * AppName * 0
    12-MAR-2010 12:24:09 * 12502
    TNS-12502: TNS:listener received no CONNECT_DATA from client
    Thanks
    Ashok

  • ClassNotFound error while running applet from Web application

    hi everyone,
    I have a web application deployed in Tomcat web server. I have HTML file at the level of WEB-INF. And all class files under WEB-INF/classes. But while ruuning the application it giving following error.
    load: class com.app.AppletTest not found.
    java.lang.ClassNotFoundException: com.app.AppletTest
         at sun.applet.AppletClassLoader.findClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.applet.AppletClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.applet.AppletClassLoader.loadCode(Unknown Source)
         at sun.applet.AppletPanel.createApplet(Unknown Source)
         at sun.plugin.AppletViewer.createApplet(Unknown Source)
         at sun.applet.AppletPanel.runLoader(Unknown Source)
         at sun.applet.AppletPanel.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    Caused by: java.io.IOException: open HTTP connection failed.
         at sun.applet.AppletClassLoader.getBytes(Unknown Source)
         at sun.applet.AppletClassLoader.access$100(Unknown Source)
         at sun.applet.AppletClassLoader$1.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         ... 10 more
    Here the HTML file applettest.html
    <html>
         <head>
              <title>Multiple Image Upload</title>
         </head>
         <body>
              <applet code="com.app.AppletTest" width="300" height="300">
              </applet>
         </body>
    </html>
    And Java applet file is
    package com.app;
    import java.applet.Applet;
    import java.awt.Color;
    import java.awt.Graphics;
    public class AppletTest extends Applet
         public void init()
              System.out.println("Init called");
              this.setBackground(new Color(180,200,250));
         public void start()
              System.out.println("Start called");
         public void paint(Graphics g)
              g.drawString("welcome Hello World",50,50);
              System.out.println("Paint called");
         public void stop()
              System.out.println("Stop called");
         public void destroy()
              System.out.println("Destroy called");
    Thanks.

    Hi,
    if u put ur com.app.AppletTest file @ WEB-INF Directry, then this problem will solve easily.
    you have to put applet package(com.app.AppletTest) @ WEB-INF Directry. Since
    Applet is using by html, u have to keep applet with html file.
    if applet class have interaction with other classes, u have to seperate all related class to applet to seperate package and put them @ WEB-INF folder.

  • Getting error while calling procedure from remote database

    When I am trying to call child procedure from remote database I am getting below error:
    ORA-02064: distributed operation not supported
    ORA-06512: at "NMUSER.NEW_CUST_UPLOAD", line 740
    (P.S. on line no 740 I issued "commit;" )
    I checked rights,synonym on all the objects they are fine.

    Oracle Error: ORA-02064
    Error Description:
    Distributed operation
    not supported
    Error Cause:
    One of the following
    unsupported operations was attempted:
    1. array execute of a remote update with a subquery that references a dblink,
    or
    2. an update of a long column with bind variable and an update of a second
    column with a subquery that both references a dblink and a bind variable, or
    3. a commit is issued in a coordinated session from an RPC procedure call
    with OUT parameters or function call.
    Cheers,
    Manik.

  • Error while calling webservice from oracle8i

    Hi,
    i am trying to call a webservice from a stored procedure in Oracle 8i.
    I am getting the following error.
    ORA-31011: XML Parsing failed
    ORA-19202: Error occurred in XML processing
    LPX-00225: end-element tag "body" does not match start element tag "br"
    Kinldy help me in knowing the cause of this issue. Also i wanted to know if
    webservices will work in oracle 8i enterprise edition release 8.1.7.4.0
    or do we need to add any patches for it.
    Thanks,
    Sathia

    This forum is for XML DB issues. XML DB is a feature of 9iR2 and later.You need t look in the XML Technology forum

  • I am getting error while calling FNDCPPROGRAMPAGE from OA page

    Hi,
    I need to submit a concurrent request with user
    given parameters from an OA page.
    Here is the codepart written in CO.....
    HashMap params = new HashMap();
    String url = "OA.jsp";
    params.put("akRegionApplicationId", "0");
    params.put("akRegionCode", "FNDCPPROGRAMPAGE");
    params.put("programApplName", "AHL");
    params.put("programName", "AHLUMATF");
    params.put("programDesc", "Build Material Stream for Planned
    Maintenance");
    params.put("programRegion", "Show");
    params.put("parameterRegion", "Show");
    // params.put("scheduleRegion", "Show");
    // params.put("notifyRegion", "Show");
    // params.put("printRegion", "Show");
    //params.put("requestMode", "DEFERRED");
    try {
    pageContext.setForwardURL(url,
    null,OAWebBeanConstants.KEEP_MENU_CONTEXT, null,
    params, true,
    OAWebBeanConstants.ADD_BREAD_CRUMB_NO,
    OAWebBeanConstants.IGNORE_MESSAGES);
    catch (Exception e)
    throw new OAException("SetDeferredException " +
    e.getMessage(),OAException.ERROR);
    I am getting the request page with the following errors
    "Could not create webbean, could not create item metadata item Name
    (FndCpLanguageTable); Region: (FNDCPPROGRAMSTATION);"
    "Could not create webbean, could not create item metadata item Name
    (FndCpCopyRequest); Region: (FNDCPPROGRAMCONTAINER);
    Please advise me, is there anything missing in code or what could be
    done to resolve the error.
    Thanks in Advance for your help.
    Regards,
    Balaji

    Hi,
    you can use this code...
    import oracle.apps.fnd.cp.request.ConcurrentRequest;
    import oracle.apps.fnd.framework.server.OADBTransaction;
    public int submitCPRequest(Number headerId) {
    try {
    OADBTransaction tx = (OADBTransaction)getDBTransaction();
    java.sql.Connection pConncection = tx.getJdbcConnection();
    ConcurrentRequest cr = new ConcurrentRequest(pConncection);
    String applnName = "PO"; //Application that contains the concurrent program
    String cpName = "POXXXX"; //Concurrent program name
    String cpDesc = "Concurrent Program Description"; // concurrent Program description
    // Pass the Arguments using vector
    // Here i have added my parameter headerId to the vector and passed the vector to the concurrent program
    Vector cpArgs = new Vector();
    cpArgs.addElement(headerId.stringValue());
    // Calling the Concurrent Program
    int requestId = cr.submitRequest(applnName, cpName, cpDesc, null, false, cpArgs);
    tx.commit();
    return requestId;
    } catch (RequestSubmissionException e) {
    OAException oe = new OAException(e.getMessage());
    oe.setApplicationModule(this);
    throw oe;
    Now to go to the Monitoring page.
    set the forward url to
    String url = "OA.jsp?akRegionCode=FNDCPREQUESTVIEWREGION&akRegionApplicationId=0";
    try {
    pageContext.setForwardURL(url,
    null,OAWebBeanConstants.KEEP_MENU_CONTEXT, null,
    params, true,
    OAWebBeanConstants.ADD_BREAD_CRUMB_NO,
    OAWebBeanConstants.IGNORE_MESSAGES);
    catch (Exception e)
    throw new OAException("SetDeferredException " +
    e.getMessage(),OAException.ERROR);
    }

  • Page fault error while calling reports from forms

    dear friends.
    when a report is called from forms, just before opening up of background engine the application gets hanged with page fault. One has to forcibly shut down the application before loggin again.
    The error mesage generated from log file is
    Fatal NI connect error 12203, connecting to:
    (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle80)(ARGV0=oracle80orcl)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))')))(CONNECT_DATA=(SID=orcl)(CID=(PR OGRAM=C:\ORAWIN95\BIN\RWRBE60.EXE)(HOST=SOUMYADIP)(USER=Soumya))))
    VERSION INFORMATION:
    TNS for 32-bit Windows: Version 8.0.5.0.0 - Production
    Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 8.0.4.0.0 - Production
    Time: 06-MAY-00 14:03:32
    Tracing not turned on.
    Tns error struct:
    nr err code: 12203
    TNS-12203: TNS:unable to connect to destination
    ns main err code: 12560
    TNS-12560: TNS:protocol adapter error
    ns secondary err code: 0
    nt main err code: 102
    TNS-00102: Keyword-Value binding operation error
    nt secondary err code: 0
    nt OS err code: 0
    After closing if we run the report next time it runs, but after 3/4 attempts the above error again occurs.
    Please Help
    Prashant

    I'm getting this also. I thought it was
    due to my use of DATA PARAMETER. I've
    logged TARS on this and have yet to hear
    back from Oracle.
    Maybe if enough of us get the error Oracle
    will give some guidance on this one.

  • Error while calling FM from report program

    i am calling a FM using the follwoing program
    REPORT  ZTEST3.
    DATA : EMPNO TYPE zempdata-EMPLOYEE_NUMBER,
          EMPNAME TYPE zempdata-EMPLOYEE_NAME,
          EMPSAL TYPE zempdata-EMPLOYEE_SALARY.
    call function 'ZEMPMASTER'
        EXPORTING
          EMPNO        =  '22609'.
          EMPNAME      =  'vishal'.
          EMPSAL      =  200.
    but when i execute this program i am getting the following error
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_DYN_CALL_PARAM_MISSING', was
    not caught and
    therefore caused a runtime error.
    The reason for the exception is:
    When calling the function module "ZEMPMASTER", one of the parameters
    needed according to the interface description was not specified.
    This parameter was "EMPNAME".
    i don't know why i am geteing this error where as in my FM ZEMPMASTER i have given only three input parameters
    EMPNO, EMPNAME AND EMPSAL.
    my FM code is like as follows
    FUNCTION ZEMPMASTER.
    ""Local Interface:
    *"  IMPORTING
    *"     REFERENCE(EMPNO) TYPE  ZEMPDATA-EMPLOYEE_NUMBER
    *"     REFERENCE(EMPNAME) TYPE  ZEMPDATA-EMPLOYEE_NAME
    *"     REFERENCE(EMPSAL) TYPE  ZEMPDATA-EMPLOYEE_SALARY
    TABLES ZEMPDATA.
    BREAK-POINT.
    data WA_zempdata type zempdata.
    WA_zempdata-EMPLOYEE_NUMBER = EMPNO.
    WA_zempdata-EMPLOYEE_NAME = EMPNAME.
    WA_zempdata-EMPLOYEE_SALARY = EMPSAL.
    BREAK-POINT.
      insert into zempdata values wa_zempdata.
    WRITE :/  wa_zempdata-employee_number,  wa_zempdata-employee_name.
    commit work.
    ENDFUNCTION.
    pls let me know why i am getting this error

    Hi vishal,
    call function 'ZEMPMASTER'
    EXPORTING
    EMPNO = '22609'.<------- Remove this period
    EMPNAME = 'vishal'.<------remove this period
    EMPSAL = 200.<-----------*retain this period*
    We must never change the format in which a FM is displayed once we call the pattern.
    The period will be automatically be available at the end of the FM.need not keep it at end of every line.
    Hope this helps.If problem still persists post back.
    Regards,
    K.Sibi

  • Error while calling an external javascript file

    Hi,
    I have added a javascript file into the public_html folder, i have named it main.js.
    I have a html file in which i am referring to the javascript externally , this too is in my public_html folder. But the HTML page does not seem to be able to invoke the javascript.It does not even enter the method.
    My code is as follows
    html file
    <head>
    <title>untitled1</title>
    <script language="Javascript" src=\"\main.js\" type=\"text/javascript\"></SCRIPT>
    </head>
    <body>
    <form name="test" method="POST" action="test">
    <input type="button" value="submit" name="submit" onclick="analyze_page()">
    </form>
    </body>
    </head>
    main.js
    <script language="Javascript">
    function analyze_page(){
    alert("testing if it works");
    </script>
    (2)
    Secondly, I also have a servlet in a package com.oracle.prod, what is the path I should give in the servlet <SCRIPT> tag so that the javascript is accessible while the page gets rendered

    Hi Kart,
    Try to do:
    <script language="Javascript" src="<c:out value="${pageContext.request.contextPath}"/>main.js" type="text/javascript"></SCRIPT>
    In that way you can access the context path of your application.
    So, another thing that I noted is \" it's unecessary if you are editing directly a jsp/html file.
    Afonso

Maybe you are looking for

  • What happen next, after erase and lock screen of macbook pro?

    Hi, I just lost my macbook pro and I have some personal data on it. I read some articles who said that Erase mac will delete whole data. When I erased my Macbook pro from Web Interface https://www.icloud.com it ask me to enter 6 digits passcode I ent

  • Unit Costs in Easy Cost Planning: Work Breakdown Structure - Program and Project Management - SAP Library

    To add a comment, please log in or register on the top of this page and choose Reply. Please write your comment in English. You can also go back to the SAP help page.

  • Save "Actions"

    Is there a way in FCE to save "actions" similar to what can be done in Photoshop? Example- You come up with process you like on applying "Ken Burns effect" to pictures. Is there a way to save this and apply as you come to other pictures you would lik

  • Best way to achieve multiple paths with quizzes using Captivate 6?

    I'm looking for the best way to achieve multiple paths and quizzes using Captivate 6. Here is the scenario: The learner watches general slides 1 – 3 and then chooses between Path A, Path B, or both paths combined.  If they choose Path A then they wat

  • MacBook PRO 17'' Problem?

    MacBook PRO 17'' Problem? I bought in America a new Macbook Pro with me already 8mj: Model Identifier: MacBookPro4, 1 Processor Name: Intel Core 2 Duo Processor Speed: 2.5 GHz Number Of Processors: 1 Total Number Of Cores: 2 L2 Cache: 6 MB Memory: 2