Error While copy flash IOS from Air-AP1262N-x-k9 to tftp
i want to copy my flast IOS to tftp but when i try to it using tftp following error
Reception#copy flash: tftp:
Source filename [ap3g1-k9w7-mx.124-25d.JA1]?
Address or name of remote host []? 192.168.1.1
Destination filename [ap3g1-k9w7-mx.124-25d.JA1]?
%Error reading flash:/ap3g1-k9w7-mx.124-25d.JA1 (Is a directory)
but i can see IOS file in flash
Reception#sh flash:
Directory of flash:/
2 -rwx 252 Mar 1 2002 00:00:17 +00:00 env_vars
3 -rwx 2002 Mar 10 2002 00:01:34 +00:00 config.txt
4 -rwx 64 Mar 1 2002 00:15:31 +00:00 sensord_CSPRNG1
5 -rwx 64 Mar 1 2002 00:15:35 +00:00 sensord_CSPRNG0
6 -rwx 6 Mar 2 2002 00:55:23 +00:00 FOC1620A18W
8 -rwx 1048 Mar 10 2002 00:01:34 +00:00 private-multiple-fs
9 -rwx 5 Mar 10 2002 00:01:34 +00:00 private-config
11 drwx 512 Mar 1 2002 00:13:37 +00:00 ap3g1-k9w7-mx.124-25d.JA1
HI Zoheb,
Try like this:
If it is a directory then try something like dir flash:ap3g1-k9w7-mx.124-25d.JA1
and if the dir does show a filename then use the pathname and filename in the more command. something like:
more copy flash: ap3g1-k9w7-mx.124-25d.JA1/ tftp
Give that a try.
Regards
Similar Messages
-
Error while copying a page from one application to another application
Hi All
I am using Oracle Apex 4.0
I getting the error ORA-06502 Pl/Sql Numeric error character string buffer too small when i copying a page from one application to another application.
Thanks & Regards
Srikkanth.MI'm having the same issue. How did you solve this?
-
Error while copying GL Accounts from One Client to another client
Hi,
We are trying to copy GL accounts created in one client to another client (Company Code is same in both the clients). First we executed FS15 (send) and a file was created on the server. With the help of BASIS team we checked that file and it contained the required values. However, when we are doing FS16 (receive) we are getting following OK messages:
File /usr/sap/DEV/SYS/global/FBISABC is being checked
Session 1 session name RFBISA20 : No terminations have been found
However, at the same time we are getting following error message:
File name FI_COPY_COMPANY_CODE_DATA_FOR_GENERAL_LEDGER_0X is unknown
Message no. SG001
Diagnosis
No entry was found in the conversion table for the logical file name FI_COPY_COMPANY_CODE_DATA_FOR_GENERAL_LEDGER_0X.
Procedure
Add an entry to the conversion table for the logical file name. Maintain the conversion table with the transaction SM30.
Can someone please advice is there something wrong that we are doing for copying GL accounts from one client to another client.
Thanks,
SanjayDear Sanjay,
Did you check the batch-input? SM35
It could have happend that there was a mistake in the batch-input data and that the destination file has not been written. If this has not been written it could not be found. (I.E. you tried to transport G/L Accounts with deletion flags but did activate the checkbox "Transfer deletion ****").
There is another point: Did you activate the box "Datei nur prüfen" (English: Check file only)? If this box is activated the programm will check if the batch-input-file will be written without mistakes but it will not write the file. Only if the checkbox is not activated the batch-input-file will be written. (the same with FS16).
Kind regards
Maike
Edited by: Maike Nemeyer on Dec 1, 2011 8:52 AM
Edited by: Maike Nemeyer on Dec 1, 2011 11:45 AM -
Error while copy the plant from 0001 ref available.
Dear All,
when i am copy the plant from 0001 ref plant i am getting the following warning message.
can you please tell me how can i avoid this warning & whats the impact.
and tell me if any other setting i has to do for plant creation through 0001 plant code.
Plant 0001 copied to 7102 without 4 number range
objects
regards,
DineshHi Dinesh,
You need not change any setting in the 0001 plant as this is the Standard SAP Plant.
Regarding the error you are getting you need not worry, i do not think it will have impact on the apllication objects.
You can ignore this message but make sure that you record the Error somewhere in case of any future references.
Thanks
Sunil Kumar -
Error while copying Update rules from One Cube to other
I am getting the following error message while I was trying to copy an existing update rule from an existing InfoCube to a New InfoCube. Has anyone experienced this before? Please let me know how to resolve this.
Formula 3ZKQ....... (Object version M) could not be read.
The new and original cubes are custom cubes.
Thanks!Hi Vinod,
Check the update rules for the original cube. Are they active? It appears that they contain a formula...check this too.
Hope this helps... -
Error while copying a file from windows oracle server to a solaris server
Hi all,
DECLARE
l_conn UTL_TCP.connection;
BEGIN
l_conn := ftp.login('Destination Ip address ', '22', 'Username', 'Password');
ftp.ascii(p_conn => l_conn);
ftp.put(p_conn => l_conn,
p_from_dir => 'MID5010_DOC1TEMP', -- Oracle Directory name from where we need to copy a file
p_from_file => 'Hipaa.33KM.5093.06152011130146885.834.O.irl',
p_to_file => '/qatest1/mihipaa5010/mj5010/DevelopmentStage/working_directory/Outbound/Data/75061252/Hipaa.00AN.07262011173844778.820.O.copied.irl'); -- Directory of the destination machine where we need to paste
ftp.logout(l_conn);
exception
when others then
dbms_output.put_line(sqlcode || sqlerrm);
--dbms_output.put_line(l_conn);
END;We are getting the below error:
SSH-1.99-OpenSSH_5.1
-29260ORA-29260: network error: TNS:connection closed
Could any one please let us know why this error is raising...prakash wrote:
Hi all,
DECLARE
l_conn UTL_TCP.connection;
BEGIN
l_conn := ftp.login('Destination Ip address ', '22', 'Username', 'Password');
ftp.ascii(p_conn => l_conn);
ftp.put(p_conn => l_conn,
p_from_dir => 'MID5010_DOC1TEMP', -- Oracle Directory name from where we need to copy a file
p_from_file => 'Hipaa.33KM.5093.06152011130146885.834.O.irl',
p_to_file => '/qatest1/mihipaa5010/mj5010/DevelopmentStage/working_directory/Outbound/Data/75061252/Hipaa.00AN.07262011173844778.820.O.copied.irl'); -- Directory of the destination machine where we need to paste
ftp.logout(l_conn);
exception
when others then
dbms_output.put_line(sqlcode || sqlerrm);
--dbms_output.put_line(l_conn);
END;We are getting the below error:
SSH-1.99-OpenSSH_5.1
-29260ORA-29260: network error: TNS:connection closed
Could any one please let us know why this error is raising...As sybrand correctly points out, this issue doesn't belong here.
You are using a 3rd party package "ftp" and the error it is indicating suggests the issue is a network issue of some sort.
We don't have the code of that package or know what it is doing, so please consult whoever supplied or wrote the package and/or your network administrators. -
I am getting ORA-02063 error while copying bulk data from DBLINK
Hi all ,
I am trying to copy data from DBlink ,whenever i am trying to pull more data ,The db link break down ,
I have try to put /*+ APPEND */ (Hint) in insert statement.Below is the insert code from my procedure
from where i am getting below error
"Error in copy_data_pkg-3113 ORA-03113: end-of-file on communication channel
ORA-02063: preceding line from TESTDBLINK"
Insert code:
INSERT /*+ APPEND */ INTO target_tab
select
col1,
col2,
col3,
col4,
col5,
o_time
FROM padmin.V_tab1@testdblink
where
trunc (sysmodtime) = trunc(sysdate)-1
and O_time >= al_time
and (CLEAR_TIME is null or CLEAR_TIME >= occur_time)
and (res_code is null or (UPPER(res_code) not LIKE '%TEST TT%' and UPPER(res_code) not LIKE '%TEST SITE%'))
and ((UPPER(BRIEF_DESC) not like '%TEST TT%' and UPPER(BRIEF_DESC) not LIKE '%TEST SITE%'))
and (o_time+(330/(24*60))) <= trunc(SYSDATE)-1/24/60/60
and catvar IN('POS')
and UPPER(action_var) not like '%SC_NET%' and UPPER(action) not like '%ROAM_NET%' and UPPER(action) not like '%PUP_NET%';
COMMIT ;
Please suggest me ,why i am getting this error.Can you elaborate the thing... I don't think /*+ APPEND */ this is working for me ,still I am getting same error.
If you have any other suggestion,I would like to hear.
Should i not put commit after some 500 records inserted ? As i am putting commit once after whole data gets inserted. -
We're getting the "duplicate session" error using Flash Remoting from Air 3.4 Mobile Apps ( IOS and Android ) with Coldfusion 10 Standard.
faultCode:Server.Processing.DuplicateSessionDetected faultString:'Detected duplicate HTTP-based FlexSessions,
generally due to the remote host disabling session cookies.
Session cookies must be enabled to manage the client connection correctly.' faultDetail:'null'
Have read most of the docs about this error -all to do with LCDS
Notes:
Not using LCDS,
No Remote Calls from loaded Sub-Apps,
No Errors from the Flex Web App which is pretty much identical and calls the same cfcs.
The error does not happen all the time and is hard to reproduce - say 5% of app sessions at a guess.
Could it be a two first time remote calls hitting the server together before a session is set up?
Our remoteObjects are in two places 1) Main Application.mxml and within a class compiled into the main app - can't see how this would be an issue.
I enabled session management for the CFCs in Application.cfc but still occurs. Is this neccessary - it's not in any docs?
Could this be something to do with the app not being shut down - as is typical with mobile users? When they resume use after a day or two surely a new session will be created?
Please advise thank you.For our profect I think this issue was caused as follows:
Believing that remoting was full asynchronous we fired a 2 or 3 remote calls to the server at the same time ( within the same function ) - usually when the users goes to a new section of the app.
This seemed to trigger the duplicate http session error since according to http://blogs.adobe.com/lin/2011/05/duplication-session-error.html two remote calls arriving before a session is created will cause 2 sessions to be created.
Our current solution ( too early to say it works ) is to daisy chain the multiple calls together .
Also there seemed to be an issue where mobile apps that never quit ( thanks Apple! ) caused the error when activated after a few hours.
I guess the session expires on the server and the error above occurs on activation.
So the mobile apps now ping the server with a remote call when activated after sleeping for more than one hour.
All duplicate http errors are silently caught and reported.
Fingers crossed we won't get any more! -
Error while copying data from infoprovider to planning area
Hi,
Error for COM routine using application program (return code 40,075)
Message no. /SAPAPO/OM102
Diagnosis
An application program has called a COM routine. During the process, an error occurred.
I got the above error while copying data from infoprovider to planning area using t code TSCUBE.
How to resolve this?Hi,
Is your issue resolved, If not please run MPOS consistency checks, Planning area consistency check and livecache consistency check.
Below are the programs for the same.
/SAPAPO/TS_lcm_cons_check
/SAPAPO/TS_PSTRU_TOOL
/SAPAPO/TS_PSTRU_CONS_CHECK
Regards
Kishore -
HELP! Downloaded LR5 and when open it shows an error message saying error while trying to change from modules and I can not even import photos. Am I doing something wrong?
I have the same problem, and the solutions in Error changing modules | Lightroom do not work. Even uninstalling and reinstalling a new copy did not solve the problem. As anyone got an idea what other lingering files might be causing the problem?
-
Error while copying page template!
Copying of a simple page template fails in Portal 10.1.2 with the following error:
Internal error (WWC-00006)
Error while copying page. (WWC-44262)
An unexpected error occurred: ORA-20100:
ORA-06512: at "PORTAL.WWSBR_STDERR", line 437
ORA-06512: at "PORTAL.WWV_THINGDB", line 1816
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "PORTAL.WWSBR_API_URL", line 73
ORA-01403: no data found (WWC-44088)
An unexpected error occurred: ORA-20100:
ORA-06512: at "PORTAL.WWSBR_STDERR", line 437
ORA-06512: at "PORTAL.WWV_THINGDB", line 1816
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "PORTAL.WWSBR_API_URL", line 73
ORA-01403: no data found (WWC-44082)
An unexpected error occurred: ORA-20100:
ORA-06512: at "PORTAL.WWSBR_STDERR", line 437
ORA-06512: at "PORTAL.WWV_THINGDB", line 1816
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "PORTAL.WWSBR_API_URL", line 73
ORA-01403: no data found (WWC-44082)
An unexpected error has occurred (WWS-32100)
ORA-1: User-Defined Exception (WWC-36000)
No data found (WWS-32101)
I already had this error in Portal 9.0.4.Hi Christian!
I already opened a TAR. As (according to the Portal docs) exporting Portal applications to future versions is not supported, waiting for another Portal release would mean starting our applications from the scratch. For this reason, bugfixes in future releases are of no really use in our case, and we definitely HAVE to find a solution for this quite crucial problem.
But thanks for this information.
Eckhard -
New-AzureDeployment - Error while copying content to a stream
Hi All,
I am trying to deploy a packages using the Azure Powershell Cmdlets.
Each time I try to deploy a particular package, I get the following error message..
New-AzureDeployment : Error while copying content to a stream.
At line:1 char:1
+ New-AzureDeployment -DoNotStart -ServiceName $strStagingCCPDeploymentServiceName ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [New-AzureDeployment], HttpRequestException
+ FullyQualifiedErrorId : System.Net.Http.HttpRequestException,Microsoft.WindowsAzure.Commands.ServiceManagement.HostedServices.NewAzureDeploymentCommand
Looking at the inner exception I am getting
Unable to read data from the transport connection: The connection was closed.
The package itself is only 80mb and uploads to my blob storage successfully however when it tries to deploy using my config file the error occurs. The same config file works fine if I use the Azure Website to deploy the package, rather than the cmdlets
and I can deploy other packages successfully using PowerShell and using Visual Studio.
Thank you for any help you can provide.Hi,
This seems to be a network issue, but it's quite strange as you can deploy the package from Visual Studio. Could you please try it on another machine (in another network environment if possible)? Also, can you try
to write a program and call the management API (http://msdn.microsoft.com/en-us/library/windowsazure/ee460813.aspx) to deploy it?
Best Regards,
Ming Xu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Error while copying company code
Hi
While copying company code from 0001, following error is giving. Can you please tell me how to go ahead with that:
Message no. TK455
Diagnosis
The value "12 " was entered in the field "REICHWEITE".
This is not possible because it is a numeric field where only numbers may be entered.
The length of the field is 000003.
System Response
The entry was not accepted.
Procedure
Enter only numeric values in this field
Regards,
PriyaHi,
Did you check the note?
it indicates:
>Use Transaction SE16 to delete all entries in the TNIW5 table that have the two-digit contents '12' in the 'Range of coverage' field.
>If you want to use the lowest value determination by range of coverage (Transaction MRN1) with valuation level = company code, you can maintain your own customer-specific Customizing entries in Transaction OMW5.
Regards,
Jigar -
Error while copying and pasting group of activities
Hi,
I am getting an error while copying and pasting a group of activities. Can anyone let me know why I am getting this message.
type : EStringListError
Event Code : SLDNA-0655-B
Description : String list does not allow duplicates
thank you.I had the same error and reported it to Oracle. They requested an XER copy and I am waiting for thier response. This problem is for that particular project only. To work around it do the following:
Create a new project, open both projects, go to wbs view, copy all wbs's from the correpted project to the new project. The new project will work fine and get rid of the correpted one.
Good Luck. -
Error while copying profile...
Error while copying profile from the default profile...
runtime error- DBIF_RSQL_INVALID_REQUEST
pls help..Irfan,
You check weather new role name is in Z,Y name space or not?, check the same thing in other clients as well. If you are in windows , then your server mey need reboot because i faced similar problem but sorted after reboot.
Regards,
Hari.
PS: Points are welcome.
Maybe you are looking for
-
Focusrite USB 2.0 Audio Driver Scarlett 2i2 in Premiere CC2014 not working
Hi everybody. I just recently upgraded to CC and cannot use my Audio Interface with it. Info: i7 Windows 7 Ultimate Focusrite Scarlett 2i2, drivers up to date Premiere Pro CC 2014 up do date GeForce GTX Titan In CS6 i have set the audio hardware to F
-
HT4623 When I download anything from app store it Says error code: 100
Please tell me how can I download because I know but it keeps on saying error code:1009
-
I keep publishing my content just as I'm told to, but it won't show up on the page. I just get the default page with a number of folders. Any ideas on what's wrong? FYI, I use host gator
-
Just installed After Effects CC - now my Photoshop CC crashes on open
I just installed After Effects CC. When I open Photoshop CC (has been installed for months working fine). It opens, but if I click anything on the interface, I get the spinning beach ball and it freezes. I uninstalled After Effects CC using the Adob
-
Unable to use video clips shot with my devices in other, 2 , Adobe Pre and others
I tried shooting a video, first since new iOS, I photograph a lot of hockey , I will combine video from different sources to a single file. I've this for years. I convert from .Mov to 264. I use a few diff programs, one is Streamclip, and Adobe Prem