Error while creating Asset Mastere Record

Hi Gurus,
When I am creating the AMR by using the transaction code AS01, below metioned error is poping up;
Serial number already exists for asset number INTERN-00001
Message no. ZFI_FA_VAL000
Could you please let me know, what is the INTERN, and I also checked in the Asset register for the serial# that has been capitalized but couldnt find the asset with the serial # which I am trying to create.
Regards,
Praveen.

Hi Praveen,
ZFI_FA_VAL000 is a own message created by a valuation you craeted. With the transaction OACV you can see the validation.
Before you save the asset the number is internaly INTERN-00001 (is the same as no number), when you save it, it get the asset number you have set-up in the numberranges

Similar Messages

  • Error While Creating Asset Class

    Hi Friends,
    I am getting the following error in development client while creating the asset class AB2200.
    "Screen Layout 200 was not created"  but the same was created.
    Please guide me how to handle this error and the reason for me getting this error message while creating asset class.
    Your quick response would be highly solicited.
    Thanks and Regards,
    C.R.Srinath

    Hi Srinath
    There are 2 things.. Create the screen layout and Define the screen layout... (IMG> AA > Master Data> Screen Layout for asset classes)
    Complete both the steps here and specify the same sccreen layout in your asset class
    Regards
    Ajay M

  • Error While Creating Asset Master in AS01

    Hi,
    While creating Asset Master in AS01,I am getting the below error.
    E003 SYST: Period 000 is not valid in financial year variant
    I am using the standard Fiscal year variant V3
    Kindly help me to fix this issue
    Thanks
    Kishore

    Hi
    GO to the transaction code  OBY6 , double clcik on company code  and see have you asigned the fiscal year variant to company code
    Kindly revert in case of any query
    regards
    roobal

  • ESS: Error while creating Family/Dependents record from portal

    Hi All,
    I'm getting a critical error while creating family members and dependents record from portal.
    CRITICAL ERROR
    "Type conflict in the ASSIGN statement in the program CL_HRPA_CONVERT_0021_US=======CP        ., error key: RFC_ERROR_SYSTEM_FAILURE"
    I checked the short dump in R/3 Side and searched for OSS note and didnt find any. I raised an OSS message.
    If any had've already comeacross this, pls let me know.
    System Details
    EP 6.0 SP15
    ESS Business Package BPERP4ESS0_0
    ESS Support Package  ESS10P_2-10002965, PCUIGP010P_1-20000568
    Thanks
    Karthik

    Hello Karthik:
    I'm getting the same error:
    "critical error while creating family members and dependents record from portal.
    Type conflict in the ASSIGN statement in the program CL_HRPA_CONVERT_0021_US=======CP ., error key: RFC_ERROR_SYSTEM_FAILURE"
    Maybe you can help me solving this problem.
    I appreciate your help.
    Thanks in advance.

  • Error while creating asset through AS91

    Hi All,
    When i am trying to create asset through AS91 for a new company i am getting error AY 252 " Current fiscal year 2007 has to be after transfer daet 31.12.2007. In this company the Asset accounting has been recently customised but when i am trying for the upload of asset master data i am getting the above given error.
    Please tell what should be done to remove this error.
    Thanks & regards,
    Prachi

    Check the transfer date for asst data transfer...make sure the current fiscal yr is after the transfer date
    Asset accounting>Asset data transfer>Parameters for data transfer>date specifications>Specify transfer date/last closed fiscal yr.

  • ESS Leave Request - Error while creating a leave record

    Hi Friends,
      Some of the ESS leave request(not workflow) has gone into error when the system tryies to create a leave record in background. I can view these error request using the report RPTARQDBVIEW. This happens when the background program(PTARQPOST) tries to create a leave record. In some cases  the status of the leave request is set to error(the status attribute of the container element(Req) has the value Error),but we are not able to find what is actual error.Is there any log where we can check what is the problem? Please advice.

    May be
    Internally the pernr might not be locked or some one may be maintaing the pernr for whom you are trying to post.

  • Error while creating asset master on a new company code

    Hi there,
    While trying to create a new asset master - Asset class XXX cannot be used in company code XXXX
        Message no. AA130
    Diagnosis
        When you create an asset, the system determines the chart of
        depreciation from the company code definition. In order for a chart of
        depreciation to be available for an asset class during asset
        maintenance, the chart of depreciation has to be entered for that asset
        class (Determine class valuation). Chart of depreciation YYYY that was
        determined is not entered for asset class 123
    System Response
        You cannot create any assets in your company code for this class.
    Please revert if you have any details regarding this. I am sure I am getting this error because of a missing entry in v_ankbv. But i am not sure on what is the config step i m missing.
    Thanks,

    You need to configure the node 'Determine Depreciation Areas in the Asset Class'  T Code-OAYZ.
    Path : Financial Accounting (New) > Asset Accounting > Valuation > Determine Depreciation Areas in the Asset Class.
    Assuming you have already done the other prior config steps involved like., Assign Chart of Depreciation to Company Code, Asset Classes etc.,
    You can also refer to the Best Practices Configuration guide (Link Below) for further details:
    http://help.sap.com/bp_bblibrary/600/html/N72_EN_DE.htm
    Regards
    Sreenivas
    Pls close the post if satisfied.

  • Showing error while creating IT0000 ee record

    Hi,
    I am new to HR functional. Please do need full.
    When i am creating record in infotype 0000, it is showing error like No entry in table T503 for     779.
    I am giving value 7 fro employee group and 79 for employee subgroup.
    Is there any where that i can enter value 779.
    Thanks,
    Thrilleswar

    Hi ram,
    Thanks so much..
    this error is resolved but the other error is showing like Number range 01 is internal, do not enter a personnel number.
    Is there any place that i can be able to make my number work here.
    Thanks,
    Thrilleswar

  • Error while creating function with record type as return type

    Hi i tried the following code to get the nth highest sal using record type and function.
    CREATE OR REPLACE PACKAGE pack_rec_cur AS
    TYPE rec_type IS RECORD (
    name EMP.ename%TYPE,
    sal EMP.sal%TYPE);
      END;The above package is created
    CREATE OR REPLACE
      FUNCTION fun_rec_cur(n INT) RETURN pack_rec_cur.rec_type AS
       rec pack_rec_cur.rec_type;
        CURSOR cur_rec IS
          SELECT ename,sal
            FROM emp
             WHERE sal is not null
              ORDER BY DESC;
    BEGIN
    OPEN cur_rec;
      FOR i IN 1..n LOOP
       FETCH cur_rec into rec;
       EXIT WHEN cur_rec%NOTFOUND;
      END LOOP;
    CLOSE cur_rec;
    RETURN rec;
    END;   The above function is giving errors
    LINE/COL ERROR
    4/7      PL/SQL: SQL Statement ignored
    7/16     PL/SQL: ORA-00936: missing expression
    SQL> Could you please correct me where i'm doing mistake
    Thanks.

    You are missing the column name in order by clauase. Is it ename desc?
    CREATE OR REPLACE
      FUNCTION fun_rec_cur(n INT) RETURN pack_rec_cur.rec_type AS
       rec pack_rec_cur.rec_type;
        CURSOR cur_rec IS
          SELECT ename,sal
            FROM emp
             WHERE sal is not null
              ORDER BY ENAME DESC; ---added ename
    BEGIN
    OPEN cur_rec;
      FOR i IN 1..n LOOP
       FETCH cur_rec into rec;
       EXIT WHEN cur_rec%NOTFOUND;
      END LOOP;
    CLOSE cur_rec;
    RETURN rec;
    END;  
    -OUTPUT
    SQL> SET SERVEROUT ON
    SQL>
    SQL> DECLARE
      2     rec            pack_rec_cur.rec_type;
      3  BEGIN
      4     rec         := fun_rec_cur (6); --you get the 6th record in order of ename desc
      5     DBMS_OUTPUT.put_line ('ename::' || rec.NAME || '  sal ::' || rec.sal);
      6  END;
      7  /
    ename::MARTIN  sal ::1250
    PL/SQL procedure successfully completed.
    SQL>

  • Error while creating a new asset in BCC.

    Getting below errors while creating a new asset(catalog/category) through BCC. I have imported the required data from CIM and install.bat from BIZUI.
    /atg/dynamo/servlet/sessiontracking/GenericSessionManager/KDzDSgGcJTS9nwvGpkr9wpyz4nnGKWPYs4QFFJ87Q1BjrTSd4JTG!1759330809!1386235100684
    atg.web.viewmapping.ItemMappingException: Invalid Mapping Mode: AssetManager.default
    [Flex Messaging] 12/05/2013 14:50:45.486 [ERROR] [Message.Remoting] Error processing remote invocation: atg.flex.service.RemoteOperationException: java.lang.NullPointerException
    Kindly suggest...

    As u imported data from CIM for production and publishing(assuming u imported for both), There is no need to run BIZUI.bat mannually, CIM runs this.
    Coming to ur error:
    From the logs  it seems that following mapMode is missing, It's OOTB and should have been loaded while Viewmapping repository data load.
    <add-item item-descriptor="mapMode" id="AmMmDef">
      <set-property name="name"><![CDATA[AssetManager.default]]></set-property>
    </add-item>
    I think there must have been problems during CIM data for publishing environment loading and because of that viemmapping is not loaded properly.
    Refer to this post for initial data load : Re: ATG ENVIRONMENT SETUP ISSUE
    Let us know if u didn't load publishing using CIM, there is some manual work required to load some repository.
    Thanks,
    Nitin.

  • Error while creating absence record in PA30 using 2001 infotype

    Hi all,
    iam getting an error while creating absence record for infotype 2001for LOP(unpaid)
    error : No quota available for att./abs. 6000 for pers. no. 61000052 between 31.12.2009 and 31.12.2009
    i have did
    Create a absence type LOP
    Determine Entry Screens and Time Constraint Classes
    Define Counting Rules
    Assign Counting Rules to Absence Types
    Payroll: India>>Absences>Describe Absence Valuation Rules 01 Unpaid Leave
    Group Absences for Absence Valuation>>Absence valuation rule>>F4 country grouping 40>> assign 01Unpaid Leave
    please solve this

    Actually I don't know how your system is configured.
    However, the error you're receiving seems you have assigned the absence type to a quota type.
    Please go to your counting rule and check whether Deduction rule - absence quotas - within entitlement field is filled.
    If yes, get the deduction rule value and go to
    SPRO Time man- Time data rec - Absences - Absence Cat - Abs counting - rules for counting (new) - deduction rules for abs quotas and check the quota type in here.
    If there is a quota assignment in place, before creating an IT2001 you need to create a IT2006 for that specific time period.
    Or, you need to delete the quota assignment via two config steps mentioned above.
    Regards,
    Dilek

  • Error message AA119 while creating asset master through AS01

    Hi
    while creating asset master (AS01), i am getting following error:-
    Depreciation key M003 not allowed (Check your entry)
    Message no. AA119
    Diagnosis
    Depreciation key M003 is not defined.
    System Response
    Processing is terminated.
    Procedure
    You have the following choices:
    Use a defined depreciation key (use input help).
    Define a depreciation key in Customizing ("change" pushbutton) and activate the key.
    I have done following in configuration:-
    1) No change in base method
    2) copied multi level method from standard key "011" to "M03" and maintain vlaue as - Acquisiton year - 9999, Years - 999, Validity period in month - 12, Base value key as - 01and depreciation % as 10
    3) No change in Period Control Methods
    4) Copied standard depreciation key "GL20" as "M003" and maintain the multilevel method as "M03"
    5) save the configuration
    6) Activate the depreciation key by selecting depreciation key and clicking on Activate button on top of the screen
    7) Import the configuration
    now while creating asset, depreciation key M003 is appearing in drop down list but getting above error. but if I tried with depreciation key GL20 (which is standard depreciation key) system accepting the input
    In target client, depreciation key display in Active stage.
    please revert if anybody has any clue to come out from above problem.
    Regards
    DD

    Dear All Foram members
    Thanks for your response.
    I got the solution and now problem has been resolve.
    Initially i have maintain Scrap Value as Default Value from Company code and Depreciation Area in Depreciation Key  (AFAMA) and I was getting the error. But now I have change the Scrap Value as CutOff Value is ignore and problem gets resolve.
    But still do not understand the relation between the erro and Scrap Value assignment. Any Idia. It will be helpful for other members also.
    Thanks Pankaj, Madhu and Paul...........
    Regards
    DD

  • ERROR Message while creating Rebate condition record T code VBO1

    Dear Experts,
    I am getting error message while creating rebate condition record T code-VBO1-Error Msg-862 system cannot read the structure for table,because of this i could not create condition record.
    Please give the solution to create condition record.
    Regards
    siva

    Hi,
    You said you are trying to do this stuff in IDES right.
    If you are using IDES provided by a company and where many people play on IDES, then you can get many such issues...
    This is by our experience.  Today you do something in IDES and tommorow that thing or config is screwed up by others.
    If you have your own IDES, then check the suggestion given by the forum Guru's.
    Regards,
    SB

  • Error occured while creating purchase info record in mm

    sir,
    while creating purchase info record  an error occured while inserting net price. it said
    NOT POSSIBLE TO DETERMINE A CONDITION TYPE FOR A PRICE
    when it attempted to generate the time dependent condition for the price you entered the systeem was unable to determine a condition type, price determination is therefore not possible.
    please inform me how to solve this problem.
    thankyou

    I think you are not using the stdard pricing becuse of that it is thrwing error
    Ok First check your pricing procedure which your using for PO
    than in that pricing procedure if you are using PB00 fro Gross price than you will have antoher pricing procedure attached to this condition.
    check in M/06 for your gross price conditon
    now did you assign the pricing procedure to vendor?
    bottom line is somthing missing in your config.
    Check all the config as below
    Pricing Procedure:
    In MM module, pricing procedure is used during RFQ and PO creation. Total value of material based on all addition and subtraction like discount, surcharge, tax, freight, etc. In this we are defining pricing procedure and linking to vendor and purchase department through the virtual schemas.
    Following steps for pricing procedure as,
    1. Define conditions.
    2. Define pricing procedure.
    3. Define virtual purchase organization and vendor.
    4. Info Record.
    Customization for Pricing Procedure :
    1. Definition of Conditions :
    /NMEK0-condition typeu2026condition types- definition (define for basic price, net price, discount, surcharge, tax etc.)
    2. Defining pricing procedure :
    /NMEK0- calculation schema-calculation schemasu2014New entries (Define procedure and put the conditions like formula so that final price will be net price / total value as per company requirement)
    3. Linking pricing procedure to independent condition types.
    /NMEK0-condition typeu2026condition types- definition for position for defined conditions (Enter the defined pricing procedure in the each independent conditions u201CPricing Procedureu201D box)
    4. Defining Schema group for Vendor :
    /NMEK0- calculation schema-schema groupsu2014vendoru2014New Entries.
    5. Defining Schema group for Purchase Organization--- New entries.
    /NMEK0- calculation schema- schema groups---- purchasing organization--- new entries.
    6. Linking Virtual Purchase Organization to actual Purchase Organization.
    /NMEK0- calculation schema- schema groups----- Assign P.Org. (in actual P.Org, enter virtual P.Org)
    7. Linking Pricing procedure to virtual P.Org and virtual vendor :
    /NMEK0- calculation schema- Determine Schema--- -Standard --- New entries (Enter virtual schema and P.Org. along with pricing procedure)
    8. Linking virtual vendor to actual vendor-- /NXK02 then enter schema group vendor in Purchasing Data )
    9. Info Records (/NME11)---- click on u201CPurch. Org. data1u201D and enter condition types and pricing procedure
    What are the steps in pricing determination in MM? Condition, Access sequence and schema.
    In the SAP MM Pricing is more important. Just yesterday I have completed the Pricing as I am doing the SAPMM now. I can give some light on this Topic, not 100%. After 2 days definitely some more I can share.
    The Basic thing is Condition Technique. In which there are
    1. Access Sequence 2. Condition Record 3. Condition Type 4. Condition Table.
    A Access Sequence access a Condition Record of a Condition Type in a Condition Table is a Condition Technique.This is a simple logic
    Here the Condition Type is very important like PB00, PBXX,RA01 etc.
    In the background every Condition Type has its own defition means the purpose of the Condition Type like, is it for Pricing or Percentage, Quntity base, Accrual Feilds etc is to be defined to work this functions.
    Normally we use the existing ones without any risk. But some cases, we have to Create a New Condition Types as per the organisation requirement.
    The Pricing Schema is useful to minimise condition types while mention prices for Vendor on the basis of Pricing Schema which we defined according to organisation requirement.
    The Pricing Schema means the calculations procedure of Condition Type.
    Ex. RA01 - Discoount % is caclulated on PB00 - Gross Price means
    RA01 is based on PB00 like that we have to define in the Pricing Schema
    which makes easy to use in realtime.
    Here PB00 has the Access Sequence - 0002.
    But RA01 does not have the Access Sequence.Why because it is a dependent on PB00. But both are Condition Types.
    In the system, by default some standard Scheme will be there at Vendor Schema Group in the Vendor Master Screen means the standard one is assigned which is very lengthy which may fullfil our requirement. But some cases which may not fullfil our requirement, in such we have to define.
    For the configuration, I may not able to explain properly through here but will give some Idea.
    Configuration: SPRO-IMG-Material Management- Purchasing- Conditions-Define Price Deternmination Process
    1. Define Access Sequence
    2. Define Condition Type
    3. Defince Calculation Schema:- Here you have to define the Schema
    Define Schema group
    1. Define Schema Group vendor
    2. Define Pricing Schema group
    3. Schema group for Purchase Organisation
    4. Assign Schema group to Purchase Organisation
    Define Schema determination
    1.define calculation schema for Standard purchase organisation
    After completion of the Schema Group, we have to assign it to Vendors.
    Then whenever we use any transaction with this Vendor, the concerned Schema will work as configured by us.
    I think this will help you. Actually the Pricing is a vast. Becuase each Condition have its own importance and each Access Sequence have its own importance. So you need not bother about this. First you learn how to define the Calculation Schema through the above.
    Here we can create many Calculation Schemas which can assign one schema to Local vendors
    another schema to out side vendor one more schema to foreign vendors like that we can classify.

  • Problem while creating assets using BAPI

    Use table enhancement BAPI_TE_ANLU
    Diagnosis :The BAPIs for creating and changing assets currently support only those customer enhancements that relate to the user fields created using SAP enhancement AIST0002.
    Can anybody give the appropriate solution why this error is coming while creating assets using BAPI.

    Looks like you are trying to transfer custom fields into the asset master data that were not added following the steps in enhancement AIST0002.
    Using EXTENSIONIN parameter, you can transfer user fields from the asset master record. However, it is not possible to transfer fields that are updated in user-defined tables. Only user fields that were defined using SAP enhancement AIST0002 and are automatically updated in table ANLU can be udpated in this way. This means you have to use table extension BAPI_TE_ANLU.
    Enhancement AIST0002 contains function module EXIT_SAPL1022_001 as a component in which user fields can be implemented.
    The documentation ( BAPIPAREX) of the structure that forms the basis for this parameter contains additional information about using this parameter.
    Please check how table ANLU has been enhanced and also go through the documentation of enhancement AIST0002.
    Regards,
    Shyam

Maybe you are looking for