Error while creating company code

hi,all,
While copying company code from standard one I am facing this problem
ENTER NUMERIC VALUE ONLY CANCELLED COPYING
Diagnosis message:
the value  "12" was entered in the field "REICHWEITE" this is not possible because it is a numeric field
where only numbers may be entered.The lenth of the field is 000003.
Whait does it mean. How to rectify this problem.
pls. help me

Hello Svinir,
The problem is caused by old entries from previous SAP releases which contain invalid data.
The TNIW5 Customizing table is a table with delivery class = C (= Maintenance only by customers - No SAP import). SAP has delivered entries in the TNIW5 table from earlier releases in the incorrect format (entries with the field contents '12') for the TNIW5-REICHWEITE field.
The solution to this
Use Transaction SE16 to delete all entries in the TNIW5 table that have the two-digit contents '12' in the 'Range of coverage' field. If you want to use the lowest value determination by range of coverage (Transaction MRN1) with valuation level = company code, you can maintain your own customer-specific Customizing entries in Transaction OMW5.
For more information use SAP Note 547875
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=547875
I hope this will solve your your problem
Br,
Tushar

Similar Messages

  • Error while creating company code with country usa

    hi all,
    when I am creating company code for with us country here i am getting the following error
    u201C Communication error with the external tax system (VERTEX_MS0018)u201D
    Can any one please give the solution for this, that will be help full to me.Thanking you
    mahesh

    You are probably using VERTEX as an external tax system.  When using VERTEX, SABRIX, etc. as an external tax system linked to SAP, connections need to be set up properly.  Please work with your Basis Team for RFC communication to work properly between SAP and VERTEX.

  • Error while copying company code

    Hi
    While copying company code from 0001, following error is giving. Can you please tell me how to go ahead with that:
    Message no. TK455
    Diagnosis
    The value "12 " was entered in the field "REICHWEITE".
    This is not possible because it is a numeric field where only numbers may be entered.
    The length of the field is 000003.
    System Response
    The entry was not accepted.
    Procedure
    Enter only numeric values in this field
    Regards,
    Priya

    Hi,
    Did you check the note?
    it indicates:
    >Use Transaction SE16 to delete all entries in the TNIW5 table that have the two-digit contents '12' in the 'Range of coverage' field.
    >If you want to use the lowest value determination by range of coverage (Transaction MRN1) with valuation level = company code, you can maintain your own customer-specific Customizing entries in Transaction OMW5.
    Regards,
    Jigar

  • Syntax error while creating tax codes for sales n purchases

    Hi all,
    While creating the tax codes for sales and purchases, i got the below error:
    Report RB13A003 has a syntax error.
    What should be done?
    Thank you

    Hi,
    I believe, it's RV13A003 report and not RB13A003... What is the exact error message (or is it a dump)?
    Regards,
    Eli

  • Error in creating company code

    Hi,
    When creating my client's company code, I am getting error message stating that "Communication error with external tax system(VERTEX_MS0018), Message no.TAX_TXJCD864
    Pl. give me clue that where I did wrong and what could be the reason for error.
    Thanks in advance

    HI ,
    There are lots of thread on this . Please have a look. Some suggest OSS note as well.
    company code creation.....
    Communication Error with the External Tax system(VERTEX MS0018)
    communication error with the external tax system(vertex_ms0018)

  • Error while creating T code for SAPMV45A

    Hi,
    I am trying to create a t code let us say ZT_VA03 for VA03 i.e. SAPMV45A screen no 102. When I execute this transaction, this gives me error  "NO entry in table T180" . Please suggest what needs to be done to get rid of this.
    Thanks,
    Anuranjan
    Message was edited by: Anuranjan Sharma

    Hi Anuranjan,
    This is actually not so easy.
    Table T180 is a screen sequence control table which is used extensively in SAPMV45A to control which screens it should display and which actions it should take when users click on buttons or select options from the menu.
    One of the keys of this table is transaction code, so when you create a new transaction code ZT_VA03 it will look up the T180 (this is not the only table, there is a sequence of quite a few of them) to determine what it should do when the transaction is first run, and then what it should do for every FCODE the user hits. 
    To remove the error (for the initial call, and also during screen processing), you would need to add entries for every action and screen into T180 (and others).
    This is quite a large task.
    Cheers,
    Brad

  • Error while creating Inter-company billing document

    Hi All,
    Help me to solve below error while creating inter-company billing document with ref to delivery document.
    " 1190984113 000000 Company code is not defined"
    Thanks for your help.

    Hi
    Please check wheather Customer has been extended to both company codes.Also check wheather 1190984113 is a G/L account.If it is a G/L account please check wheather it has been maintained in the company code or not.If it is not maintianed then kindly maintain the G/L account and then create the Intercompany billing document
    Regards
    Srinath

  • Error while creating inter-company invoice  for stock transport

    Hi ,
    I am facing following errors while creating inter-company invoice for STO order.
    We have scenario where standard PO is created in  company code A  & then replenishment delivery is created in company code B.While raising inter-company invoice to company code A, we are facing problem.
    In replenishment delivery we have 10 line items. But  when we try to do inter company invoice through VF01/VF04 we get following log
    XXXXXXXXXX(delivery Number) 000000 Customer XXXXX: Customer master table KNVV is missing (VF-022)
    XXXXXXXXXX (delivery Number)000010 The bill-to party could not be determined (VF-047)
    XXXXXXXXXX (delivery Number)000010 The payer could not be determined (VF-048)
    With this first line item from delivery is not flows to invoice & if we saves this invoice then it is get saved with account determination error as some of the data does not comes into invoice header like account assignment group for customer, Payment term, destination country,region, tax classification for customer etc. That means invoice gets created without first line item from delivery with account determination error & so,no accounting document gets generated.
    I checked customer master for all SP,SH,BP,PY they are correctly maintained.This was working fine few months back, but not working now.
    If anybody had come across such kind of scenario, your valuable inputs will be highly appreciated.
    Thanks & kind regards,
    Ganesh Palatshaha

    Hello
    Kindly check the sales area of customer involved, whether the customer maintain with sales area for STO.
    If that is note the case the refer following link:
    - Error VF 047 & 048 while creating Inter company billing
    Regards
    JP

  • Error while creating inbound process code

    Hi gurus,Iam creating a custom idoc.
    800 -> sender
    810 -> Receiver
    i have completed outbound processing on 800.
    On 810, completed following steps for inbound processing.
    1.) I have added my Inbound FM in BD51.
    2 ) Assigned my FM to Message type and Idoc type in WE57.
    3 ) When adding my FM to process code in BD67, it is showing error that
    “Entry ZSATPC does not exist in TEDE2 - check your entry”.
    { zsatpc is my custom process code }.
    4) While Creating Process Code in WE42 with options [processing with ale service / Processing
    by FM] and saving it is giving error that
    " " is not a valid language.
    And when I saw help (?) regarding this error, the following text appeared in a window.
    Diagnosis
    A key with language "" "" was specified for table "EDE2T". This is not a valid language.
    This applies to field "LANGUA"
    System Response
    The system rejects the key.
    Procedure
    Enter a valid language. This is usually the language you logged on in.
    You logged on in language "EN".
    Table T002 contains a list of valid languages.
    Please solve this error. Give me steps to create inbound process code.
    thanx in advance. Hoping replies soon........
    Satish.

    Dear Satish,
    Very peculiar. The language should come from your log on language. Try to login into the system again. Call we42 again and see if it works.
    Regards, Rakesh

  • Error while create user in LDAP - LDAP: error code 1

    Hi Guy's, I am getting below error while creating user in LDAP MS AD.
    cn=3001,ou=sAP_IDM,dc=springswf,dc=comcn<mx:TEXT>putNextEntry failed storingOU=SAP_IDM,DC=springswf,DC=com</mx:TEXT>
    <mx:LTEXT>Exception from Add operation:javaxnaming.NamingException: {LDAP: error code 1 = 00000000: LdapErr: DSID-OC090AE2, coment: In order to perform this operation a successful bind must be completed on the connection.,data0,vece
    Steps I am following:
    1. create a job through wizard and pick from (IC->jobs->Active Directory->Create Active Directory User)
    2. Destination tab values that I am passing:
    dn: cn=Dummyuser,ou=SAP_IDM,dc=<main domain>,dc=com
    objectClass: top|person|organizationalPerson|user
    sn: Surname
    givenName: GivenName
    displayName: Dummy user displayname
    Under <main domain> an OU has been created called SAP_IDM for testing user creation from IDM.
    Admin user account created called <XYZ> and has full control over SAP_IDM OU.
    I am passing <XYZ> credentials into my job for user creation.
    Thanks for you help!

    Farhan,
    Based on the error message presented,
    In order to perform this operation a successful bind must be completed on the connection
    Make sure that you're using the correct information to do the AD Bind.  User name should be something like cn=administrator,cn=users,dc=xxx,dc=xxx and the proper password.
    Matt

  • Error while creating stock using tcode: MB1C

    Error while creating stock using tcode: MB1C
    The Error is: Check table T004F:entry G006 does not exist

    Hi ,
    Please check the FSV (field status variant) for your company code in OBY6 .
    then go to transaction code OB14 --> enter the FSV --> Check if field status group G006(Material account) is maintained there or not.
    if not please maintain it.
    Thanks & Regards
    Anshu

  • Error while creating a column in master

    Hi all,
    I am using the sap business one 8.8 version.
    I am getting an error while creating a user defined column for a master table.
    The error code is -104.
    The method I had used for creating a master table is as follows.
    *#region Create Table*
            public static bool CreateTable(string TableName, string TableDescription, SAPbobsCOM.BoUTBTableType TableType, SAPbouiCOM.Application oApplication, SAPbobsCOM.Company oCompany)
                SAPbobsCOM.UserTablesMD oUserTableMD;
                int intRecCode;
                bool boolResult = false;
                oUserTableMD = (SAPbobsCOM.UserTablesMD)oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserTables);
                try
                    if (!oUserTableMD.GetByKey(TableName))
                        oUserTableMD.TableName = TableName;
                        oUserTableMD.TableDescription = TableDescription;
                        oUserTableMD.TableType = TableType;
                        intRecCode = oUserTableMD.Add();
                        if (intRecCode == 0)
                            boolResult = true;
                catch (Exception e)
                    oApplication.MessageBox(e.Message, 1, "Ok", "", "");
                finally
                    System.Runtime.InteropServices.Marshal.ReleaseComObject(oUserTableMD);
                    GC.Collect();
                return boolResult;
            #endregion
    ==================================
    The following is the code for creating a column in the above master
    private static void AddField(string TableName, string ColumnName, string ColDescription, SAPbobsCOM.BoFieldTypes FieldType, int Size, SAPbobsCOM.BoFldSubTypes SubType, string ValidValues, string ValidDescription, string
    SetValidValues, SAPbouiCOM.Application oApplication, SAPbobsCOM.Company oCompany)
    int intLoop;
                string[] strValue, strDesc;
                SAPbobsCOM.UserFieldsMD oUserFieldsMD;
                SAPbobsCOM.Recordset oRecordSet;
                oUserFieldsMD = (SAPbobsCOM.UserFieldsMD)oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserFields);
                oRecordSet = (SAPbobsCOM.Recordset)oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset);
                try
                    oRecordSet.DoQuery("SELECT COUNT(*) FROM CUFD WHERE TableID = '" + TableName + "' AND AliasID = '" + ColumnName + "'");
                    if (Convert.ToInt16(oRecordSet.Fields.Item(0).Value) == 0)
                        System.Runtime.InteropServices.Marshal.ReleaseComObject(oRecordSet);
                        oRecordSet = null;
                        strValue = ValidValues.Split(Convert.ToChar(","));
                        strDesc = ValidDescription.Split(Convert.ToChar(","));
                        if (strValue.GetLength(0) != strDesc.GetLength(0))
                            throw new Exception("Invalid Values");
                        oUserFieldsMD.TableName = TableName;
                        oUserFieldsMD.Name = ColumnName;
                        oUserFieldsMD.Description = ColDescription;
                        oUserFieldsMD.Type = FieldType;
                        if (FieldType != SAPbobsCOM.BoFieldTypes.db_Numeric)
                            oUserFieldsMD.Size = Size;
                        else
                            oUserFieldsMD.EditSize = Size;
                        oUserFieldsMD.SubType = SubType;
                        oUserFieldsMD.DefaultValue = SetValidValues;
                        for (intLoop = 0; intLoop <= strValue.GetLength(0) - 1; intLoop++)
                            oUserFieldsMD.ValidValues.Value = strValue[intLoop];
                            oUserFieldsMD.ValidValues.Description = strDesc[intLoop];
                            oUserFieldsMD.ValidValues.Add();
                        if (oUserFieldsMD.Add() != 0)
                            UpdateLastErrorDetails(-104, oCompany);
                catch (Exception e)
                { oApplication.MessageBox(e.Message, 1, "Ok", "", ""); }
                finally
                    if (oRecordSet != null)
                        System.Runtime.InteropServices.Marshal.ReleaseComObject(oRecordSet);
                        oRecordSet = null;
                    System.Runtime.InteropServices.Marshal.ReleaseComObject(oUserFieldsMD);
                    GC.Collect();

    Hi,
    I am newly using BI publisher . I am using 10.1.3.4.0 . I am just trying to create a report in test name. that is the first step to create a report where i am getting error. I am using default RPD paint , where all the user and Groups are defined .

  • Error While Creating Grant Master

    Hi,
    I am getting the error while creating the Grant Master.Kindly Help me
    The Error Messages:
    The special grant NOT RELEVANT (dummy grant) is automatically created(Message no. GMMASTERDATA111)     
    Cannot get grant defaults for sponsor 0000600000(Message no. GMMASTERDATA037)
    Sponsor 0000600000 does not permit grant type 01(Message no. GMMASTERDATA036)
    Duplicate grant number (Message no. GMMASTERDATA031)
    Thanks
    Kishore

    Hi
    go to OMWD : group together Valuation area like Plant and Company code.
    Also Check OMS2 to update qty and value at plant level
    check Enterprise assignment has been done properly..
    hope that helps ..
    thanks
    mk

  • Error while Creating PO from Purchase Requistion in Third Party  Sales

    Dear Team,
                          While Creating the Purchase Order from Purchase Requistion in Third Party Sales. When I am saving the PO I am getting the Error in GL Account Cannot be Used. I have disabled the field G/L Account in settings of Account Assignment Category of Third Party. Still I am facing that Error while Creating Purchase Order.  Can you guide me where we do this Assignment of G/L Account so that I can change the G/L Account.
    Thanks,
    Farhan.

    Dear Farhan,
    1. Go to T. Code: FS00 and enter GL number and Company Code and go to Tab: Create/bank/interest, write down the field status group.
    2. Go to T. Code: OBC4 and Select your Field Status Variant and Double Click: Field Status Group (From Left-hand Dialog Structure)
    Double-Click on to Field Status Group (as noted down from in Step 1).
    From Select group, Select Additional account assignments and make Earmarked Funds, as optional.
    Best Regards,
    Amit

  • Error while creating inquiry

    While creating inquiry iam getting this error:-
    No business area could be determined.
    Please do let me know what to do..
    thnx in advance..

    Hi,
    if you are practising on an ides server, as a temporary solution you can goto OB65 and remove the tick against your company code and save it. Try doing the inquiry now.
    By default when you company code 1000 or 0001 we need to maintain some settings for the newly created company code and business area is one. This is however an FI job.
    *The functions of business area is to create balance sheets and profit and loss statement below the company code level.  It functionality can be duplicated using Profit center accouting. *
    OX03 - Creation of new Business Area
    New Business Areas can be created anytime in the Enterprise structure in the IMG.  However, in the year of creation, no comparison can be done with the previous year data as the Business Area did not exist in the previous year and there are no postings in the previous year.
    After create the new Business Areas, new G/L accounts should be created for :-
    Sales
    Cost of Sales
    External Process Cost
    Consumption
    Material Change
    Purchase
    Cost of Difference for Production
    Factory Output for Production Order
    Next create a default account assignment to maintained the link for cost center and business area.
    Transaction OKB9
    Enter the Company Code and Cost Element
    Cocd      Cost elem.      Acct assignment detail
    Enter the details as per business area/valuation area
    regards
    sadhu kishore

Maybe you are looking for