Error while creating inbound process code

Hi gurus,Iam creating a custom idoc.
800 -> sender
810 -> Receiver
i have completed outbound processing on 800.
On 810, completed following steps for inbound processing.
1.) I have added my Inbound FM in BD51.
2 ) Assigned my FM to Message type and Idoc type in WE57.
3 ) When adding my FM to process code in BD67, it is showing error that
Entry ZSATPC does not exist in TEDE2 - check your entry.
{ zsatpc is my custom process code }.
4) While Creating Process Code in WE42 with options [processing with ale service / Processing
by FM] and saving it is giving error that
" " is not a valid language.
And when I saw help (?) regarding this error, the following text appeared in a window.
Diagnosis
A key with language "" "" was specified for table "EDE2T". This is not a valid language.
This applies to field "LANGUA"
System Response
The system rejects the key.
Procedure
Enter a valid language. This is usually the language you logged on in.
You logged on in language "EN".
Table T002 contains a list of valid languages.
Please solve this error. Give me steps to create inbound process code.
thanx in advance. Hoping replies soon........
Satish.

Dear Satish,
Very peculiar. The language should come from your log on language. Try to login into the system again. Call we42 again and see if it works.
Regards, Rakesh

Similar Messages

Error while creating inbound delivery

Hi All,
I get an error while creating inbound delivery from ASN
"Error during conversion of unit of measure: UoM is missing -> ST BOR131
Please help solve this issue.
Thanks in advance
Regards,
Thiru

hi,
please maintain the uom for tour material.
or
reffer this link
Alternate Unit of Measure Conversion Rule Error
/thread/2000551 [original link is broken]
Thanking you.

Error while creating a process order

Dear Guru's
While creating a process order ,i am facing an error.
"Unable to create batch. Storage location BPSS is invalid for material 112100050
Message no. 40116".
How to assign specific storage loaction to that particular material.I have assigned in material master "work scheduling tab",But it was throwing an error while doing process order.Pls help me to solve this problem.
Thanks in advance,
Rgds,
cherukuri

Hi Cherukuri
Are u using special procurement key "80"? It seems that storage location is not mentioned for the header material in the production plant.
Maintain this using T Code MMSC. It will solve ur issue
Rgds

Partner profile not maintained error while testing inbound processing

Hi gurus,
I am trying to upload a customer master data using LSMW idoc method, I followed all the required steps and then I tried to test the inbound processing using T.code we19 and there i gave my basic type as debcor01 and I clicked on standard inbound test but it gives me an error which says partner profile is not maintained, but I have maintained the partner profile and assigned the same in LSMW. So anyone of you can please help me to solve this problem.
thanks,
Rajeev

Rajeev,
Check whether the Account Category is mantained properly or not.
K.Kiran.

Error while creating a process chain

Hello BI Gurus,
I have activated the Business Content Scenario in Plant Maintenance for Infocube 0PM_C08(Measurement Results).
It provides a datasource -> infocube flow,through DSO with transfer and update rules.(3.X scenario)
I have two questions -
1.When I am trying to create a process chain for this scenario for regular delta loads(Loading from the datasource - > DSO - > infocube),
Start - >Execute InfoPackage->Activate DSO Data ->
Then when i insert the Execute Infopackage for the load step from DSO to Infocube in the process chain and check it, it is giving an error saying "InfoPackage ZPAK_D50AJ26831X6L4IIOTZTSXWAE is generated; NOT able to be used as loading variant ".
I got this infopackage by right clicking on the context menu and going to Additional Functions -> Update 3.x data to Data targets.
Why am I getting this error and how to resolve it, bcos when i load it manually it is working fine?
2.If the error is because I did not use a infopack created by me, then how to create a infopack for loading to the infocube from DSO in BI7, because when i select from the Context Menu for creating infopack, it is taking me to the already generated IP ?
Also instead of using the 3.X mechanisms, if I decide to create a DTP, will the transformation created with it automatically map all the rules in the "Update Rules" for all fields?
Waiting for your guidance.
With Warm Regards,
Vineeth
Edited by: VINEETH SUBRAMANIAN.B on Jan 31, 2009 12:11 PM

Hi,
Check in SDN
Problem with process chain
Re: Updating Data from ODS to IC using Process chains
Indirect Spend Analysis
Thanks
Reddy

Run time error while Creating IDN and Inbound Delivery

Hi All,
I am getting Run time error while creating Inbound Delivery Notification from Inbound Queue and Inbound Delivery from IDN
After debugging i come to know that system is looking for Patch Level SAPKNA7026 but in my system Patch is upto SAPKNA7022
Is there any OSS notes available to deactivate/resolve this run time error ? I tried 0001798794 Deactivation of hierarchical access functionality but system is still giving me run time error
Regards,
P@M

Hi Agrawal
As you are getting run-time error after entering the sold to party and material and the error is in SAPLV61Z ,
close the session for sometime and open again and then create sales order and then enter sold to party and material and then check wheather you are getting or not. If you are still facing the problem then take the help of the ABAP & BASIS consultant's.
Regards
Srinath

Need elp to create the process code for inbound idoc !

When I am creating a process code in WE42 and associating a
function module then another screen comming while saving....but in that screen in the drop down list..i didnt find the function module....how to solve ?

Hi,
Use transaction BD51 to make the FM known as an inbound FM.
Regards,
John.

Error while creating process order

Hi,
While creating a process order I am getting an error.
The error is :
Error while calculating costs for order xxxxxxx.
how to solve this?

Dear,
please open this prd order in change mode CO02 then press tab button cost calculation near release button in order header screen now do not save this order go to edit >log> cost calculation
There it will show the error tht occured during costing
Please refer this thread,
Cost error when saving production oredr
Regards,
R.Brahmankar

Error while create user in LDAP - LDAP: error code 1

Hi Guy's, I am getting below error while creating user in LDAP MS AD.
cn=3001,ou=sAP_IDM,dc=springswf,dc=comcn<mx:TEXT>putNextEntry failed storingOU=SAP_IDM,DC=springswf,DC=com</mx:TEXT>
<mx:LTEXT>Exception from Add operation:javaxnaming.NamingException: {LDAP: error code 1 = 00000000: LdapErr: DSID-OC090AE2, coment: In order to perform this operation a successful bind must be completed on the connection.,data0,vece
Steps I am following:
1. create a job through wizard and pick from (IC->jobs->Active Directory->Create Active Directory User)
2. Destination tab values that I am passing:
dn: cn=Dummyuser,ou=SAP_IDM,dc=<main domain>,dc=com
objectClass: top|person|organizationalPerson|user
sn: Surname
givenName: GivenName
displayName: Dummy user displayname
Under <main domain> an OU has been created called SAP_IDM for testing user creation from IDM.
Admin user account created called <XYZ> and has full control over SAP_IDM OU.
I am passing <XYZ> credentials into my job for user creation.
Thanks for you help!

Farhan,
Based on the error message presented,
In order to perform this operation a successful bind must be completed on the connection
Make sure that you're using the correct information to do the AD Bind. User name should be something like cn=administrator,cn=users,dc=xxx,dc=xxx and the proper password.
Matt

Syntax error while creating tax codes for sales n purchases

Hi all,
While creating the tax codes for sales and purchases, i got the below error:
Report RB13A003 has a syntax error.
What should be done?
Thank you

Hi,
I believe, it's RV13A003 report and not RB13A003... What is the exact error message (or is it a dump)?
Regards,
Eli

ALE INBOUND Process Code

Hi,
In ALE INBOUND Process Code Apart from the Function Module name, what are the important things to be filled up while creating that InBound process code in WE42. What is the importance of those? what is the importance of Object Attributes in that?

Hi Mahesh check this may be useful to you
The inbound function module needs to be linked to the message type and the message type needs to be linked to the appropriate inbound process code at the partner profile level before the scenario is enabled. These steps are described below in detail.
Link Message Type to Function Module (WE57) Client independent
u2022 Enter transaction WE57 (ALE -> Extensions -> Inbound -> Allocate function module to logical message)
Define FM settings (BD51) Client independent
u2022 Enter transaction BD51 (ALE -> Extensions -> Inbound -> Define settings for input modules)
u2022 Click on New entries
u2022 Enter 0 for mass processing in the output column
u2022
Maintain process codes (WE42) Client dependent
A process code needs to be maintained on each client. It then needs to be linked to the message via the partner profiles on each client. This allows the various clients to use a unique function module for the same message type.
To maintain the process code follow these steps:
u2022 Log on to the appropriate receiving system client
u2022 Execute WE42 (ALE -> Extensions -> Inbound -> Maintaining process codes inbound)
u2022 Choose Inbound with ALE service
u2022 Choose Processing with function module
u2022 Click on Processing with function module and choose create icon
u2022 Click on New Entries
u2022 Type in process code XXXXXXX and give it a description and save
u2022 Now you are asked to Please maintain codes added in ALE entry methods, enter and choose XXXXXX and copy it. You should choose a FM similar to your one.
u2022 Enter your process code XXXX
u2022 Enter your function module XXXXXX
NOTE: The next 6 steps are used in workflow error handling.
u2022 Enter IDPKFIDCMT in object type
u2022 Enter MASSINPUTFINISHED in End event
u2022 Enter IDOCINVOIC in IDoc object type
u2022 Enter INPUTERROROCCURREDFI in IDoc start event
u2022 Enter INPUTFINISHEDFI in IDoc End event
u2022 Enter IDOCINVOIC in Application object type
You will need to determine the task associated with object XXXXXXXX, and then assign the appropriate position to it. This position will then receive the application error messages via workflow.
To set up the workflow area please consult the Workflow config guide.
Create inbound partner profile
For each message type you need to maintain the inbound partner profiles.
Maintain receiving system partner profile (WE20) Client dependent
To maintain inbound partner profiles read the document ALE configuration procedure:
u2022 Add the message type XXXXX with process code XXXX.
u2022 Enter the output mode (background, immediately) for inbound processing and NO message code.
Test
Once the inbound function module has been debugged the scenario should be ready to test in its entirety. If problems occur, read through the relevant areas of this document to check your configuration or code.
You can find all the inbound and outbound processcodes in we64.
Regards,
SMS.

Error while creating a task for creating an generic task /app/dac/CustomSQ

Hi ,
I have created a sql file in DAC server /app/dac/CustomSQLs/ ,just to fire an update sql in database
In DAC task tab i have created a task with the following:
Command for incremental load :/app/dac/CustomSQLs/DBNameBeforeLoad.sql
Primary source :flatfileconnection
target source:DBCONNECTION_OLAP
Execution type:SQL FILE
Task phase:GENERAL
I created subject area and assembled ,then created a Execution plan.
When i try to execute this EP ,it shows the following error in DAC log:
ANOMALY INFO::: Error while creating a task for creating an generic task /app/dac/CustomSQLs/DBNameBeforeLoad.sql
MESSAGE:::/app/dac/CustomSQLs/DBNameBeforeLoad.sql - invalide template name!
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.TaskInitializationException
com.siebel.analytics.etl.etltask.SQLFileTask.doInit(SQLFileTask.java:69)
com.siebel.analytics.etl.etltask.GenericTaskImpl.init(GenericTaskImpl.java:194)
Does my above configuration is correct ..?

verify the following settings:
1. mapping of ECC plant and storage location and logical system number with the appropriate availability group code since this links the stock types in EWM to ECC org elements (SPRO -> EWM -> Interfaces -> ERP Integration -> Goods movement)
2. ensure the availability group configuration is correct (SPRO -> EWM -> GR Process -> Configure availability group for putaway) - check all applicable nodes in this configuration since the availability group code is assigned in the pertinent storage types

Error in creating a process using runtime class - please help

Hi,
I am experimenting with the following piece of code. I tried to run it in one windows machine and it works fine. But i tried to run it in a different windows machine i get error in creating a process. The error is attached below the code. I don't understand why i couldn't create a process with the 'exec' command in the second machine. Can anyone please help?
CODE:
import java.io.*;
class test{
public static void main(String[] args){
try{
Runtime r = Runtime.getRuntime();
     Process p = null;
     p= r.exec("dir");
     BufferedReader br = new BufferedReader(new InputStreamReader(p.getInputStream()));
     System.out.println(br.readLine());
catch(Exception e){e.printStackTrace();}
ERROR (when run in the dos prompt):
java.io.IOException: CreateProcess: dir error=2
at java.lang.Win32Process.create(Native Method)
at java.lang.Win32Process.<init>(Win32Process.java:63)
at java.lang.Runtime.execInternal(Native Method)
at java.lang.Runtime.exec(Runtime.java:550)
at java.lang.Runtime.exec(Runtime.java:416)
at java.lang.Runtime.exec(Runtime.java:358)
at java.lang.Runtime.exec(Runtime.java:322)
at test.main(test.java:16)
thanks,
Divya

As much as I understand from the readings in the forums, Runtime.exec can only run commands that are in files, not native commands.
Hmm how do I explain that again?
Here:
Assuming a command is an executable program
Under the Windows operating system, many new programmers stumble upon Runtime.exec() when trying to use it for nonexecutable commands like dir and copy. Subsequently, they run into Runtime.exec()'s third pitfall. Listing 4.4 demonstrates exactly that:
Listing 4.4 BadExecWinDir.java
import java.util.*;
import java.io.*;
public class BadExecWinDir
public static void main(String args[])
try
Runtime rt = Runtime.getRuntime();
Process proc = rt.exec("dir");
InputStream stdin = proc.getInputStream();
InputStreamReader isr = new InputStreamReader(stdin);
BufferedReader br = new BufferedReader(isr);
String line = null;
System.out.println("<OUTPUT>");
while ( (line = br.readLine()) != null)
System.out.println(line);
System.out.println("</OUTPUT>");
int exitVal = proc.waitFor();
System.out.println("Process exitValue: " + exitVal);
} catch (Throwable t)
t.printStackTrace();
A run of BadExecWinDir produces:
E:\classes\com\javaworld\jpitfalls\article2>java BadExecWinDir
java.io.IOException: CreateProcess: dir error=2
at java.lang.Win32Process.create(Native Method)
at java.lang.Win32Process.<init>(Unknown Source)
at java.lang.Runtime.execInternal(Native Method)
at java.lang.Runtime.exec(Unknown Source)
at java.lang.Runtime.exec(Unknown Source)
at java.lang.Runtime.exec(Unknown Source)
at java.lang.Runtime.exec(Unknown Source)
at BadExecWinDir.main(BadExecWinDir.java:12)
As stated earlier, the error value of 2 means "file not found," which, in this case, means that the executable named dir.exe could not be found. That's because the directory command is part of the Windows command interpreter and not a separate executable. To run the Windows command interpreter, execute either command.com or cmd.exe, depending on the Windows operating system you use. Listing 4.5 runs a copy of the Windows command interpreter and then executes the user-supplied command (e.g., dir).
Taken from:
http://www.javaworld.com/javaworld/jw-12-2000/jw-1229-traps.html

Error while creating SC: Internal Error - termination type TH_RES_FREE

Hi I encountered this error while creating a SC. All attributes for this user are maintained and the "check user" transaction does not give any error.
Amol Mate
Error when processing your request
What has happened?
The URL http://punhjwsapsrm:8000/sap/bc/gui/sap/its/bbpsc02/! was not called due to an error.
Note
The following error text was processed in the system SSS : Internal Error
The error occurred on the application server PUNHJWSAPSRM_SSS_00 and in the work process 1 .
The termination type was: TH_RES_FREE
The ABAP call stack was:
Function: B40B_READ_TABLE of program SAPLBBP_BD_DRIVER_40B
Function: META_READ_TABLE of program SAPLBBP_BD_META_BAPIS
Form: LOCATIONS_READ of program SAPLBBP_ATTR_F4
Function: BBP_ATTR_F4_SLOC_PPOMA of program SAPLBBP_ATTR_F4
Form: STG_LOC_GET_FOR_LOCATION of program SAPLBBP_SC_APP
Form: STG_LOC_GET of program SAPLBBP_SC_APP
Form: LOCATION_STG_LOC_GET of program SAPLBBP_SC_APP
Form: USER_ATTRIBUTES_GET of program SAPLBBP_SC_APP
Form: SC_INIT of program SAPLBBP_SC_APP
Function: BBP_SC_APP_EVENT_DISPATCHER of program SAPLBBP_SC_APP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system SSS in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server PUNHJWSAPSRM_SSS_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 1 in transaction ST11 on the application server PUNHJWSAPSRM_SSS_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http-c:100-u:PTEST -l:E-s:SSS-i:PUNHJWSAPSRM_SSS_00 -w:1-d:20051121-t:171904-v: TH_RES_FREE-e:Internal Error
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team

Hi Amol,
First of all the sicf transaction is to be used only if you use the internal ITS.
Now you have to put an external breakpoint in the source code of the ABAP Program or FM you want to debug , one of these in your case :
Function: B40B_READ_TABLE of program SAPLBBP_BD_DRIVER_40B
Function: META_READ_TABLE of program SAPLBBP_BD_META_BAPIS
Form: LOCATIONS_READ of program SAPLBBP_ATTR_F4
Function: BBP_ATTR_F4_SLOC_PPOMA of program SAPLBBP_ATTR_F4
Form: STG_LOC_GET_FOR_LOCATION of program SAPLBBP_SC_APP
Form: STG_LOC_GET of program SAPLBBP_SC_APP
Form: LOCATION_STG_LOC_GET of program SAPLBBP_SC_APP
Form: USER_ATTRIBUTES_GET of program SAPLBBP_SC_APP
Then launch the transaction in IE, once the program reaches a breakpoint, you'll get the ABAP debuger in IE.
Regards.
PS: if it doesn't work, put the parameter ~generatedynpro in BBPGLOBAL service to have it applied to all BBP transactions
Vadim

Error while creating AW

Hi
I got following error while creating AW via Wizard.
Preparing
Creating analytic workspace...
Processing cube REFCOST
Processing Creating Dimension : REFPRODUCT
Processing Creating Dimension : REFTIME
Processing Defining Load for Dimension: REFPRODUCT
Processing Refreshing Dimension : REFPRODUCT
Processing Defining Load for Dimension: REFTIME
Processing Refreshing Dimension : REFTIME
Processing Creating Cube : REFCOST
Processing Defining Load for Cube: REFCOST
SqlException = ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "OLAPSYS.DBMS_AWM_PRV", line 469
ORA-01422: exact fetch returns more than requested number of rows
ORA-06512: at "OLAPSYS.DBMS_AWM_PRV", line 983
ORA-06512: at "OLAPSYS.DBMS_AWM", line 428
ORA-06512: at line 1
Error Code = 6510
Sql State = 65000
All the cubes could not be added to the Analytic Workspace COST;
The following cubes could not be added : COST
java.sql.SQLException: ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "OLAPSYS.DBMS_AWM_PRV", line 469
ORA-01422: exact fetch returns more than requested number of rows
ORA-06512: at "OLAPSYS.DBMS_AWM_PRV", line 983
ORA-06512: at "OLAPSYS.DBMS_AWM", line 428
ORA-06512: at line 1
Tidying Up
Failed to create the analytic workspace
Can anyone point out why this error is coming?
Hrishi

Did you change any of the text in the lob write statements ?
I believe you get this error if you increase the number of characters without increasing the 1st argument which looks as though it represents the number of characters

Error while creating inbound process code

Similar Messages

Maybe you are looking for