Error while creating webservice destination in PI 7.1

Hi,
I have a Webdynpro application developed with NWDS 7.1 that is consuming web services from PI 7.1 server.
I have exposed RFCu2019s from PI 7.1 as web service using transaction se37 and consumed them in my Webdynpro application.
I have to deploy this application on PI 7.1.
When I am creating web service destination in NWA -> SOA Management -> Destination Template Management
I am getting the following error,
Error while trying to obtain the selected private key. Possible cause is that private key System-key has been deleted on the server.
If anyone know the reason for this error please reply.
Thank you.
Regards,
Shweta

Go to the JNDI Browser (Nwa -> Problem Management), and check if the proxy was deployed correctly with the exact name "Proxy2919".
Also, check the OSS note below.
#1292633 - JPR: Throwing "No remote bean found for reference of class"

Similar Messages

RFC error while creating JCo Destinations

Hi Team,
We have been getting RFC_Communication_Error over time and again while creating MetaData type JCo Destination in EP 7. Actually We am configuring a Business package for ESS.
I am pasting the error,
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed Connect_PM TYPE=B MSHOST=<server> GROUP=public R3NAME=<xxx> MSSERV=sapms<yyy> PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR service 'sapms<yyy>' unknown TIME Tue Jun 12 16:43:08 2007 RELEASE 700 COMPONENT NI (network interface) VERSION 38 RC -3 MODULE ninti.c LINE 530 DETAIL NiPGetServByName2: service 'sapms<yyy>' not found SYSTEM CALL getservbyname_r COUNTER 4
We have created Application type connections successfully. the tests on these were also successful.
Thank you,
Vamshi

Can u pl check for the entry in the services file of the JAVA Engine/portal.
sapmsQ10 36XX/tcp
If this entry is not there please create the same @ ..WINDOWS\system32\drivers\etc\ open the services file in notepad and make an entry in the last line.
format is
sap<SID> Press TAB once 36XX/tcp<Press Enter>
where XX is the Instance no of your Java Central Instance.
If the prob persists please update.
Priyabrata

Error while creating webservice in Netweaver7.1

I am working with EJB 2.1 project in Netweaver 7.1 . After creating session bean when i m trying to create webservice i m getting following error
IWAB0234E An internal error occurred. Details: null
    java.lang.NullPointerException
    at org.eclipse.jst.ws.internal.consumption.ui.widgets.runtime.ClientRuntimeSelectionWidgetDefaultingCommand.getServerFromProject(ClientRuntimeSelectionWidgetDefaultingCommand.java:554)
    at org.eclipse.jst.ws.internal.creation.ui.widgets.runtime.ServerRuntimeSelectionWidgetDefaultingCommand.setServiceDefaultServer(ServerRuntimeSelectionWidgetDefaultingCommand.java:309)
    at org.eclipse.jst.ws.internal.creation.ui.widgets.runtime.ServerRuntimeSelectionWidgetDefaultingCommand.execute(ServerRuntimeSelectionWidgetDefaultingCommand.java:172)
    at org.eclipse.wst.command.internal.env.core.fragment.CommandFragmentEngine.runCommand(CommandFragmentEngine.java:418)
    at org.eclipse.wst.command.internal.env.core.fragment.CommandFragmentEngine.visitTop(CommandFragmentEngine.java:358)
    at org.eclipse.wst.command.internal.env.core.fragment.CommandFragmentEngine.moveForwardToNextStop(CommandFragmentEngine.java:253)
    at org.eclipse.wst.command.internal.env.ui.widgets.SimpleCommandEngineManager$5.run(SimpleCommandEngineManager.java:252)
    at org.eclipse.wst.command.internal.env.ui.widgets.SimpleCommandEngineManager.runForwardToNextStop(SimpleCommandEngineManager.java:216)
    at org.eclipse.wst.command.internal.env.ui.widgets.WizardPageManager.runForwardToNextStop(WizardPageManager.java:96)
    at org.eclipse.wst.command.internal.env.ui.widgets.WizardPageManager.getNextPage(WizardPageManager.java:147)
    at org.eclipse.wst.command.internal.env.ui.widgets.WizardPageManager.getStartingPage(WizardPageManager.java:78)
    at org.eclipse.wst.command.internal.env.ui.widgets.DynamicWizard.getStartingPage(DynamicWizard.java:362)
    at org.eclipse.jface.wizard.WizardDialog.showStartingPage(WizardDialog.java:1173)
    at org.eclipse.jface.wizard.WizardDialog.createContents(WizardDialog.java:545)
    at org.eclipse.jface.window.Window.create(Window.java:426)
    at org.eclipse.jface.dialogs.Dialog.create(Dialog.java:1081)
    at org.eclipse.wst.command.internal.env.ui.widgets.popup.DynamicPopupWizard.run(DynamicPopupWizard.java:126)
    at org.eclipse.ui.internal.PluginAction.runWithEvent(PluginAction.java:256)
    at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionItem.java:545)
    at org.eclipse.jface.action.ActionContributionItem.access$2(ActionContributionItem.java:490)
    at org.eclipse.jface.action.ActionContributionItem$5.handleEvent(ActionContributionItem.java:402)
    at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:66)
    at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:938)
    at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3682)
    at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3293)
    at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2389)
    at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2353)
    at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2219)
    at org.eclipse.ui.internal.Workbench$4.run(Workbench.java:466)
    at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:289)
    at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:461)
    at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
    at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:106)
    at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:153)
    at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:106)
    at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:76)
    at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:363)
    at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:176)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:504)
    at org.eclipse.equinox.launcher.Main.basicRun(Main.java:443)
    at org.eclipse.equinox.launcher.Main.run(Main.java:1169)
    at org.eclipse.equinox.launcher.Main.main(Main.java:1144)
How to resolve this issue???

Hi
Looks like an eclipse/NDS error, upgrade to the next sp (may be some components were missing during the installation). Check the installation log of NDS.
regards
Lakshminarayanan.V

Error while creating webservice from function module in ECC

Hi
while creating a web service out of a function module in ECC, in the configure service section we get a message saying ' Remember that the service does not have any runtime configuration and therefore cannot be used. Create the Web service configuration in the NetWeaver Admninistrator (transaction WSADMIN2).'
instead of check box 'release for runtime'.
Our ECC at release 7 patch level 22.
Checked in SCICM, SICF teh service and the folder are active.
Please suggest if we are missing on anything
Regards
Kumar

In new version on ECC, the runtime configurations needs to be performed in transaction SOAMANGER.
On executing the transaction, it opens a browser. The important configurations to be performed are:
1. Configure J2EE server and host. You can choose to provide the ECC server and host
2. Administration of the service in "Single Service Administration". The navigation path may differ depending of the ECC versions. But it is related to administration of the services.
Once done, check the WSDL generated.
Use this WSDL in the NWDS.
Regards,
Sharath

Error while creating WebService for BAPI

Hi,
I am trying to create a webservice for BAPI, i created Virtual interface and Webserice and activated.
In transaction code WSCONFIG i checked webservice has been released. When i test webservice i am getting following error in browser.
- <soap-env:Envelope xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/">
- <soap-env:Body>
- <soap-env:Fault>
<faultcode>soap-env:Server</faultcode>
<faultstring xml:lang="en">SOAP processing failure, error id = 112</faultstring>
</soap-env:Fault>
</soap-env:Body>
</soap-env:Envelope>
Could u please tell me whats wrong on this?
thanks for ur time.
Murali.

Does tht mean i need to add the following code
Line item number.
item-itm_number = '000010'.
itemx-itm_number = 'X'.
Material
item-material = p_matnr.
itemx-material = 'X'.
Plant
item-plant    = p_plant.
itemx-plant   = 'X'.
Quantity
item-target_qty = p_menge.
itemx-target_qty = 'X'.
APPEND item.
APPEND itemx.
For second item.
Line item number.
item-itm_number = '000020'.
itemx-itm_number = 'X'.
Material
item-material = '600020001'.
itemx-material = 'X'.
Plant
item-plant    = p_plant.
itemx-plant   = 'X'.
Quantity
item-target_qty = p_menge.
itemx-target_qty = 'X'.
APPEND item.
APPEND itemx.
Fill schedule lines
lt_schedules_in-itm_number = '000010'.
lt_schedules_in-sched_line = '0001'.
lt_schedules_in-req_qty    = p_menge.
APPEND lt_schedules_in.
Fill schedule lines
lt_schedules_in-itm_number = '000020'.
lt_schedules_in-sched_line = '0002'.
lt_schedules_in-req_qty    = p_menge.
APPEND lt_schedules_in.
Fill schedule line flags
lt_schedules_inx-itm_number = '000010'.
lt_schedules_inx-sched_line = '0001'.
lt_schedules_inx-updateflag = 'X'.
lt_schedules_inx-req_qty     = 'X'.
APPEND lt_schedules_inx.
Fill schedule line flags
lt_schedules_inx-itm_number = '000020'.
lt_schedules_inx-sched_line = '0002'.
lt_schedules_inx-updateflag = 'X'.
lt_schedules_inx-req_qty     = 'X'.
APPEND lt_schedules_inx.
But i guess it is overwritting my frst material..
Also i m gettin a error
For object rv_beleg, number range interval doesnot exist
Pls suggest

Error while creating the HTTP client with destination GB_DPSRetrieve

Hi All,
It is an interface R/3 -->XI --> HTTP ( proxy to HTTP ).
Please find the error log below and throw some light why the HTTP adapter is getting error -
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SAP="http://sap.com/xi/XI/Message/30">
- <SOAP:Header>
- <SAP:Main xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" versionMajor="003" versionMinor="000" SOAP:mustUnderstand="1" wsu:Id="wsuid-main-92ABE13F5C59AB7FE10000000A1551F7">
<SAP:MessageClass>SystemError</SAP:MessageClass>
<SAP:ProcessingMode>synchronous</SAP:ProcessingMode>
<SAP:MessageId>DC98499F-7E42-74F1-A41F-0017A4107EE6</SAP:MessageId>
<SAP:RefToMessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:RefToMessageId>
<SAP:TimeSent>2007-11-21T15:51:30Z</SAP:TimeSent>
- <SAP:Sender>
<SAP:Party agency="http://sap.com/xi/XI" scheme="XIParty">GovernmentGateway</SAP:Party>
<SAP:Service>GGMailbox</SAP:Service>
<SAP:Interface namespace="http://sap.com/xi/E-FILING_GB/2005">DPSretrieve</SAP:Interface>
</SAP:Sender>
- <SAP:Receiver>
<SAP:Party agency="" scheme="" />
<SAP:Service>SAP_DEV_ERP2005</SAP:Service>
<SAP:Interface namespace="http://sap.com/xi/HR">HR_GB_EFI_DPSretrieve</SAP:Interface>
</SAP:Receiver>
<SAP:Interface namespace="http://sap.com/xi/E-FILING_GB/2005">DPSretrieve</SAP:Interface>
</SAP:Main>
- <SAP:ReliableMessaging xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:QualityOfService>BestEffort</SAP:QualityOfService>
</SAP:ReliableMessaging>
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_CLIENT_DEST</SAP:Code>
<SAP:P1>GB_DPSRetrieve</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while creating the HTTP client with destination GB_DPSRetrieve</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
- <SAP:HopList xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
- <SAP:Hop timeStamp="2007-11-21T15:51:30Z" wasRead="false">
<SAP:Engine type="BS">SAP_DEV_ERP2005</SAP:Engine>
<SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter>
<SAP:MessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:MessageId>
<SAP:Info>3.0</SAP:Info>
</SAP:Hop>
- <SAP:Hop timeStamp="2007-11-21T15:51:30Z" wasRead="false">
<SAP:Engine type="IS">is.00.lbsth-tb1ci</SAP:Engine>
<SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter>
<SAP:MessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:MessageId>
<SAP:Info>3.0</SAP:Info>
</SAP:Hop>
- <SAP:Hop timeStamp="2007-11-21T15:51:30Z" wasRead="false">
<SAP:Engine type="IS" />
<SAP:Adapter namespace="http://sap.com/xi/XI/System">HTTP</SAP:Adapter>
<SAP:MessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:MessageId>
<SAP:Info />
</SAP:Hop>
</SAP:HopList>
- <SAP:RunTime xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Date>20071121</SAP:Date>
<SAP:Time>155130</SAP:Time>
<SAP:Host>lbsth-tb1ci</SAP:Host>
<SAP:SystemId>XIS</SAP:SystemId>
<SAP:SystemNr>00</SAP:SystemNr>
<SAP:OS>Windows NT</SAP:OS>
<SAP:DB>ORACLE</SAP:DB>
<SAP:Language />
<SAP:ProcStatus>023</SAP:ProcStatus>
<SAP:AdapterStatus>000</SAP:AdapterStatus>
<SAP:User>PISUPER</SAP:User>
<SAP:TraceLevel>1</SAP:TraceLevel>
<SAP:LogSeqNbr>000</SAP:LogSeqNbr>
<SAP:RetryLogSeqNbr>000</SAP:RetryLogSeqNbr>
<SAP:PipelineIdInternal>SAP_CENTRAL</SAP:PipelineIdInternal>
<SAP:PipelineIdExternal>CENTRAL</SAP:PipelineIdExternal>
<SAP:PipelineElementId>60C3C53B4BB7B62DE10000000A1148F5</SAP:PipelineElementId>
<SAP:PipelineService>PLSRV_CALL_ADAPTER</SAP:PipelineService>
<SAP:QIdInternal />
<SAP:CommitActor>X</SAP:CommitActor>
<SAP:SplitNumber>0</SAP:SplitNumber>
<SAP:NumberOfRetries>0</SAP:NumberOfRetries>
<SAP:NumberOfManualRetries>0</SAP:NumberOfManualRetries>
<SAP:TypeOfEngine client="200">CENTRAL</SAP:TypeOfEngine>
<SAP:PlsrvExceptionCode />
<SAP:EOReferenceRuntime type="TID" />
<SAP:EOReferenceInbound type="TID" />
<SAP:EOReferenceOutbound type="TID" />
<SAP:MessageSizePayload>0</SAP:MessageSizePayload>
<SAP:MessageSizeTotal>2918</SAP:MessageSizeTotal>
<SAP:PayloadSizeRequest>0</SAP:PayloadSizeRequest>
<SAP:PayloadSizeRequestMap>0</SAP:PayloadSizeRequestMap>
<SAP:PayloadSizeResponse>0</SAP:PayloadSizeResponse>
<SAP:PayloadSizeResponseMap>0</SAP:PayloadSizeResponseMap>
<SAP:Reorganization>INI</SAP:Reorganization>
<SAP:AdapterInbound>PLAINHTTP</SAP:AdapterInbound>
<SAP:AdapterOutbound>IENGINE</SAP:AdapterOutbound>
<SAP:InterfaceAction>INIT</SAP:InterfaceAction>
<SAP:RandomNumber>15</SAP:RandomNumber>
<SAP:AckStatus>000</SAP:AckStatus>
<SAP:SkipReceiverDetermination />
<SAP:Receiver_Agreement_GUID>24422A5646443F8E9D975D57A3EE8162</SAP:Receiver_Agreement_GUID>
</SAP:RunTime>
- <SAP:PerformanceHeader xmlns:SAP="http://sap.com/xi/XI/Message/30">
- <SAP:RunTimeItem>
<SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.5</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_MAPPING_REQUEST</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_MAPPING_REQUEST</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_OUTBOUND_BINDING</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_OUTBOUND_BINDING</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_CALL_ADAPTER</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.656</SAP:Timestamp>
</SAP:RunTimeItem>
</SAP:PerformanceHeader>
- <SAP:Diagnostic xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:TraceLevel>Information</SAP:TraceLevel>
<SAP:Logging>Off</SAP:Logging>
</SAP:Diagnostic>
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="T">SystemError message generated. Guid: DC98499F7E4274F1A41F0017A4107EE6</Trace>
<Trace level="1" type="T">Error during execution of message : DC98499CA1EABEF1B4DD00110A63BF06</Trace>
<Trace level="1" type="T">ApplicationMessage was (=RefToMsgId): DC98499CA1EABEF1B4DD00110A63BF06</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
</SAP:Trace>
</SOAP:Header>
- <SOAP:Body>
<SAP:Manifest xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="wsuid-manifest-5CABE13F5C59AB7FE10000000A1551F7" />
</SOAP:Body>
</SOAP:Envelope>
Regards,
Kishore

Hi,
In the HTTP Receiver what is the Addressing Type used ? (URL Address or HTTP Destination).
If its URL Addressing Type, check if right Authentication Type is used with valid values and for HTTP Addressing Type check this HTTP Client Create Error, it could be helpful.
Also check if the Target system can be reached from the XI server to validate the configuration parameters.
Regards,
S.Santhosh Kumar

Error while creating the JCO destinations

Hi All,
I am getting the following error while creating the JCO destinations.
<b>There are no message servers maintained in the associated SLD. Please contact your system administrator.</b>
Please help me in resolving this
Thanks

http://help.sap.com/saphelp_erp2005vp/helpdata/en/24/8fa93e08503614e10000000a114084/frameset.htm
Creating New Web AS ABAP Technical Systems
/*Reward if helpful
Message was edited by:
Anant
Message was edited by:
Anant

Error while creating the HTTP client with destination

Hi ,
I am getting this error while connecting to https location on receiver channel . The below error i am getting in SXMB_moni
Error while creating the HTTP client with destination
The receiver party is doing some security setting on there end and for that purpose we have provided the external IP address to them , after that we are getting the above error.
We have already installed the client certificate on our staging server , and have done the correct setting in SM59 and channel.

Check few things..
1) I believe you use specify destination for the addressing type field in the comm channel. If so make sure you entered valid target URL address in the SM59 of type http destination.
2) Check the validitity of the certificate. You can import the certificate both in java and abap stack.
3) Make sure certificate is installed as expected.
4) Send the request and talk to the target system and check what error information they get in their log related to ssl.

Error while creating model classes, operation aborted in NWDS

Hi All,
When i select Adaptive rfc 2 model and then search for the RFC, when i select RFC and click on next i get an error while importing :
Error while creating model classes, operation aborted.
It is working fine in visual composer and i have activated function module, RFC but getting same error. It is also working in web service navigator also.
Can any one help me out??
Regards,
Pradeep kumar
Edited by: pradeep_546 on Feb 17, 2011 9:35 PM
Edited by: pradeep_546 on Feb 17, 2011 9:36 PM
Edited by: pradeep_546 on Feb 17, 2011 9:37 PM

Hai guys thanks for reply
Tushar,
I am using NWDS 7.2, ce7.2 server, ECC 6.0.
Amit,
I have tested the JCO destinations they are working fine and i created a new pair of JCO destinations but unable to import the Adaptive RFC2 Model gives same error but Adaptive webservices are working fine in my NWDS7.2
Deepak,
I am unable to create model in other projects also.
I have sufficient amount of memory in my drive.
I have imported the DC to other NWDS but it gives same error.
Thanks for all,
Regards,
Pradeep Kumar G
Edited by: pradeep_546 on Feb 18, 2011 3:05 PM

STRUST - Error while creating PSE

Hi all,
i want to create the PSE for SNC (SAP Cryptolib). -> Webservices with Certificates
SNC ID: sys-sapsnc@<domain>.com
Algorithm: RSA
Key Length: 1024
Error message:
Error while creating PSE
Message no. TRUST040
System: ERP 2005
System PSE is already created
SSL Server PSE is already created
SSL Client (Anonymous) PSE is already created
SSL Client (Standard) PSE is already created
regards

Hi Ralf,
I think I did something similar with XI about a year ago. You have to create or import some certificates / CA Certificates using STRUST (it depends if you have officially signed certificates or if you are using your own selfsigned certificates. In this case you need the root certificate as well).
=> Note 510007 might be useful
=> When importing your own root CA make sure you choose a valid namespace for Trust Center (starting with Z e.g. ZSELFCA) and choose Root-CA for Category.
=> If you want to view, modify or deltete entries choose menu > certificate > database and you will see a screen where you can search for the entries in the certificate database
Just in case you have problems with your PSE make a copy of directory /usr/sap/SID/DVEBMGS<XX>/sec
and delete your existing PSE to create a new one (Carefully!!!
- First of all make sure you installed SAPSECULIB.
- After that you should create a new PSE or create new entries for SSL Server (optionally client etc.)
- You can create an entry directly in TRUST Manager. The resulting certificate will be selfsigned. You can sign
this cert using your CA and then after having it signed you have to import the certificate response (use openssl to do cert stuff)
=> This might be helpful: http://help.sap.com/saphelp_nw04/helpdata/en/24/61ab3b92818b70e10000000a114084/frameset.htm
You can import your own certificates from menu > certificate > import in the maintenance section of the SSL Server PSE or you can just click on the "Import Certificate" button
When done you should check that your generated/imported certificates are working by simple accessing your server using the https protocol (e.g. https://<server>:<sslport>/sap/public/ping should be fine)
Just in case you used your own CA to sign the certificates your Browser will display popup saying that the certificate is not signed by any known trusted CA (we know that so we can ignore that
If you want to use client cert authentication you have to repeat the explained steps for SSL Client (Standard)
=> Create the PSE, sign the generated certificate etc., import the certificate response
When this is all done you should do the following:
- Create a RFC Destination for HTTPS Communication (call sm59, open the Folder HTTP Connections to External Server)
- In the destination enter the destination Host and the path of your application
- After that open the TAB Logon/Security
- In the Status of Secure Protocol Section choose SSL active and DEFAULT SSL Client (Standard) as SSL Client Certificate
- Save all your changes
You should now be able to use this destination for your Webservice communication and it will be encrypted using SSL
Hope this helps
If you have further questions let me know
Cheers

Error while creating setuppackage

Hi All,
I am getting the following error while creating a setup package.
0010 tc.mobile.admin.bl Creation of virtual mi instance failed.
Please suggest what can be the reason for the same.
Also i have certain queries while creating a setup package for Mobile 2005 device.
1.While creating a SDA file in the Operating System tab i m not able to see any option for mobile 2005 device.It shows only WINCE/PPC 2002.Can i use this one or do we have to make some settings or something.
2.I have a MI25Tom_en.CAB file for Mobile framework.But i wanted to integrate it with the trustore and some mobileengine config parameters like syncpassword handling option = loca.What i have to do for the same.If i have a cab file with all these integratd can i use that one or server will by itself put the trustore while generating a SDA file.
3.We have to create two components one for Framework and second for install sequence amd we have to install onle creme on the PDA as i read somewhere.Do i need to put JSSE1-0-3_01.CAB somewhere while defining the mobile component or JSSE also i have to install on the PDA before running the setup.cab on PDA.
Please suggest
Thanks
Regards
Devendra Phate

Hi Devendra,
If you have downloaded Framework sda from SAP market place.
Then generally the name for the MobileComponent is MobileEngineJsp or AWT.
You can also check the name of MobileComponent in MCD.xml by opening sda->mobile-description->mcd.xml.
Search with this name and version in NWA , if search fails then there is some problem with reload or deployment process.
Check the following.
Login to the ABAP system.
Launch transaction sm59. Create new TCP/IP type RFC connection.
Enter some name for the RFC destination. Give program ID = MEMGMT_MOBILE_CONTAINER_SYNC.
Enter appropriate gateway service and host (same as you entered in Visual Admin). Test Connection.
Launch transaction sm30.
Open table MEMGMT_J2EE_DEST . Create a new entry. Enter the name of RFC destination that you created in SM59 in RFC Destination field. Enter some description.
Save the data.
Regards,
Satyendra

Error while creating inter-company invoice for stock transport

Hi ,
I am facing following errors while creating inter-company invoice for STO order.
We have scenario where standard PO is created in company code A & then replenishment delivery is created in company code B.While raising inter-company invoice to company code A, we are facing problem.
In replenishment delivery we have 10 line items. But when we try to do inter company invoice through VF01/VF04 we get following log
XXXXXXXXXX(delivery Number) 000000 Customer XXXXX: Customer master table KNVV is missing (VF-022)
XXXXXXXXXX (delivery Number)000010 The bill-to party could not be determined (VF-047)
XXXXXXXXXX (delivery Number)000010 The payer could not be determined (VF-048)
With this first line item from delivery is not flows to invoice & if we saves this invoice then it is get saved with account determination error as some of the data does not comes into invoice header like account assignment group for customer, Payment term, destination country,region, tax classification for customer etc. That means invoice gets created without first line item from delivery with account determination error & so,no accounting document gets generated.
I checked customer master for all SP,SH,BP,PY they are correctly maintained.This was working fine few months back, but not working now.
If anybody had come across such kind of scenario, your valuable inputs will be highly appreciated.
Thanks & kind regards,
Ganesh Palatshaha

Hello
Kindly check the sales area of customer involved, whether the customer maintain with sales area for STO.
If that is note the case the refer following link:
- Error VF 047 & 048 while creating Inter company billing
Regards
JP

Error while create user in LDAP - LDAP: error code 1

Hi Guy's, I am getting below error while creating user in LDAP MS AD.
cn=3001,ou=sAP_IDM,dc=springswf,dc=comcn<mx:TEXT>putNextEntry failed storingOU=SAP_IDM,DC=springswf,DC=com</mx:TEXT>
<mx:LTEXT>Exception from Add operation:javaxnaming.NamingException: {LDAP: error code 1 = 00000000: LdapErr: DSID-OC090AE2, coment: In order to perform this operation a successful bind must be completed on the connection.,data0,vece
Steps I am following:
1. create a job through wizard and pick from (IC->jobs->Active Directory->Create Active Directory User)
2. Destination tab values that I am passing:
dn: cn=Dummyuser,ou=SAP_IDM,dc=<main domain>,dc=com
objectClass: top|person|organizationalPerson|user
sn: Surname
givenName: GivenName
displayName: Dummy user displayname
Under <main domain> an OU has been created called SAP_IDM for testing user creation from IDM.
Admin user account created called <XYZ> and has full control over SAP_IDM OU.
I am passing <XYZ> credentials into my job for user creation.
Thanks for you help!

Farhan,
Based on the error message presented,
In order to perform this operation a successful bind must be completed on the connection
Make sure that you're using the correct information to do the AD Bind. User name should be something like cn=administrator,cn=users,dc=xxx,dc=xxx and the proper password.
Matt

Error While creating Domain offline in windows...

I am trying to create a domain in windows using my scripts which i use in unix. But i am getting the following error. Here i am using Ant /build.xml/ and domain.properties( in this i pass the details) Please help....
C:\scripts>setenv
C:\scripts>set WEBLOGIC_HOME=C:\bea\wlserver_10.3
C:\scripts>set BEA_HOME=C:\bea
C:\scripts>set WORK_DIR=C:\wldomains
C:\scripts>set DOMAIN_HOME=C:\wldomains
C:\scripts>call "C:\bea\wlserver_10.3\server\bin\setWLSEnv.cmd"
CLASSPATH=C:\bea\patch_wls1030\profiles\default\sys_manifest_classpath\weblogic_
patch.jar;C:\bea\patch_cie660\profiles\default\sys_manifest_classpath\weblogic_p
atch.jar;C:\bea\JROCKI~1\lib\tools.jar;C:\bea\WLSERV~1.3\server\lib\weblogic_sp.
jar;C:\bea\WLSERV~1.3\server\lib\weblogic.jar;C:\bea\modules\features\weblogic.s
erver.modules_10.3.0.0.jar;C:\bea\WLSERV~1.3\server\lib\webservices.jar;C:\bea\m
odules\ORGAPA~1.5/lib/ant-all.jar;C:\bea\modules\NETSFA~1.0_1/lib/ant-contrib.ja
r;.;C:\Program Files\QuickTime\QTSystem\QTJava.zip
PATH=C:\bea\patch_wls1030\profiles\default\native;C:\bea\patch_cie660\profiles\d
efault\native;C:\bea\WLSERV~1.3\server\native\win\32;C:\bea\WLSERV~1.3\server\bi
n;C:\bea\modules\ORGAPA~1.5\bin;C:\bea\JROCKI~1\jre\bin;C:\bea\JROCKI~1\bin;C:\o
racle\product\10.2.0\client_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\Syst
em32\Wbem;C:\Program Files\Windows Imaging\;C:\Program Files\Perforce;C:\Program
Files\QuickTime\QTSystem;c:\ant\bin;C:\bea\WLSERV~1.3\server\native\win\32\oci9
20_8
Your environment has been set.
C:\scripts>ant clean
Buildfile: build.xml
identify-os:
init:
clean:
[delete] Deleting directory C:\scripts\build
BUILD SUCCESSFUL
Total time: 1 second
C:\scripts>ant setup-domain
Buildfile: build.xml
identify-os:
init:
[mkdir] Created dir: C:\scripts\build
init-domain-env:
setup-domain:
identify-os:
init:
init-domain-env:
config-domain:
identify-os:
init:
init-domain-env:
backup-domain:
identify-os:
init:
init-domain-env:
delete-domain:
[echo] Deleting domain 'C:\wldomains\pdc2' ...
[echo] Configuring WebLogic 10.3 domain (offline mode) ...
identify-os:
init:
run-wlst-script:
[echo] Running WLST script 'C:\scripts\wlst\offline\config-domain.py' ...
[java] Initializing WebLogic Scripting Tool (WLST) ...
[java] Welcome to WebLogic Server Administration Scripting Shell
[java] Type help() for help on available commands
[java] Loading configuration properties ...
[java] [I] Reading the domain template ...
[java] [I] Configuring the domain ...
[java] [I] Configuring domain 'pdc2' ...
[java] [I] Creating log mbean for 'Domain' : 'pdc2' ...
[java] [I] Configuring the admin user ...
[java] [I] Configuring admin user 'system' ...
[java] [I] Configuring the admin server ...
[java] [I] Configuring admin server 'myserver' ...
[java] [I] Renaming server 'AdminServer' to 'myserver' ...
[java] [I] Updating server 'myserver' ...
[java] [I] Creating log mbean for 'Server' : 'myserver' ...
[java] [I] Creating SSL for server 'myserver' ...
[java] [I] Creating WebServer for server 'myserver' ...
[java] [I] Creating WebServerLog mbean for 'WebServer' : 'myserver' ...
[java] [I] Configuring machines ...
[java] [I] Configuring clusters ...
[java] [I] Configuring servers ...
[java] [I] Configuring servers 'myserver' ...
[java] [I] Configuring server 'myserver' ...
[java] [I] Updating server 'myserver' ...
[java] [I] Updating log mbean for 'Server' : 'myserver' ...
[java] [I] Updating SSL for server 'myserver' ...
[java] Error: setListenPort() failed. Do dumpStack() to see details.
[java] [I] Updating WebServer for server 'myserver' ...
[java] [I] Updating WebServerLog mbean for 'WebServer' : 'myserver' ...
[java] [I] Configuring startup classes ...
[java] [I] Configuring shutdown classes ...
[java] [I] Configuring mail sessions ...
[java] [I] Setting domain options ...
[java] [I] Setting overwrite domain to 'true'
[java] [I] Setting create start menu to 'false'
[java] [I] Setting java home to 'C:/beajdk160_05'
[java] [I] Setting server start mode to 'dev'
[java] [I] Saving the domain configuration ...
[java] Error: writeDomain() failed. Do dumpStack() to see details.
[java] [I] Closing the domain template ...
[java] [I] Reading the domain configuration ...
[java] Error: readDomain() failed. Do dumpStack() to see details.
[java] [I] Configuring JDBC ...
[java] [I] Configuring JDBC system resources 'CPoolDS,EPoolDS,poswotDataSou
rce,MainTxDataSource,AdditionalTxDataSource,PDC1PoolDS,urgentMessageDataStore,Us
rFriendlyDescPoolDS' ...
[java] [I] Configuring JDBC system resource 'CPoolDS' ...
[java] Error: No domain or domain template has been read.
[java] Problem invoking WLST - Traceback (innermost last):
[java] File "C:\scripts\wlst\offline\config-domain.py", line 149, in ?
[java] File "C:\scripts\Lib\script\offline\jdbc.py", line 35, in configJD
BCSystemResources
[java] File "C:\scripts\Lib\script\offline\jdbc.py", line 51, in configJD
BCSystemResource
[java] File "C:\scripts\Lib\script\offline\jdbc.py", line 97, in hasJDBCS
ystemResource
[java] File "C:\scripts\Lib\script\common\wlstutils.py", line 99, in chec
kPath
[java] TypeError: string member test needs char left operand
BUILD FAILED
C:\scripts\build.xml:20: The following error occurred while executing this line:
C:\scripts\build.xml:431: The following error occurred while executing this line
C:\scripts\build.xml:743: Java returned: 1
Total time: 10 seconds

Hai,
After doing snapshot my application was created and even in fdm also i found error while creating application(hint:cache not found) but now everything is fine don't know what exactly the error may be but now i am facing 404 error while doing Assign Access control in shared services console what may be the reason did anyone experienced this error if so please provide me the solution.
Edited by: 940022 on Jun 15, 2012 3:50 AM
Edited by: 940022 on Jun 15, 2012 3:51 AM

PDF Error while creating New PCR

Hi All,
i am getting belolw error while creating new PCR, it suppose to open PDF but with out opening it is giveing following error.
The initial exception that caused the request to fail, was:
com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (401) Unauthorized. The requested URL was:"http://localhost:50000/AdobeDocumentServices/Config?style=document"
com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentRuntimeException: Failed to UPDATEDATAINPDF
Request you guide me to resolve this problem
Thanks,
Srinivasu.Y

Hello Srinivasu,
It seems your Adobe configuration is not correct. Please use SAP note 944221 for troubleshooting.
Also go through online help documentation-
http://help.sap.com/erp2005_ehp_04/helpdata/en/2f/d7844205625551e10000000a1550b0/frameset.htm
Configuration: Business Package for Manager Self-Service->Configuring Adobe Document Services
Regards
Pooja

Error while creating webservice destination in PI 7.1

Similar Messages

Maybe you are looking for