Error while distributing the model

Hi
I am not able to successfully distribute my model thru BD64. I am getting the error msg as ' the model has not been updated'.The configuration done till now is according to the basic procedure.
Can anyone please suggest a way to overcome this error.
thanks

Hi,
You can create a distribution model and then add message type to it; however, there are some preconditions which you need to ensure before you create the model.
Preconditions:
1) Ensure that you have the message type in both the systems; if custom msg type is used, you need also to create the one in the partner system.
2) Do all configuration related to msg type, idoc type, etc in your partner system as well
3) Create RFC destination in the current system for your partner system... and test the connection if it is working fine
After you create the model and added msg type to it, you also need to do the following:
1) Go to Edit --> Model View --> Distribute to distribute/ create it in your partner system
2) To validate, you can check in your partner system if the model is automatically created there
3) Then create Partner profile in both the systems by going to Environment --> Generate Partner Profiles
Hope it helps and solves your problem.
Regards, Tapas
<Pls award pts if useful or answered>

Similar Messages

Error while distributing the ALE distribution model through BD64

Hi,
I am getting the error while distributing the distribution model through BD64. The error is as follows:
"Model view DVGDVH has not been updated
Reason: the following ALE connection already exists in model view TESTMOD".
What does this means?
Regards,
Soumya.

Dear Sapera,
I faced the same problem last night.
We just manually deleted the distribution model from receiving system.
Log on to receiving system => BD64 => change/dispay => edit => delete => Save.
Once deleted log in to sender system and then select model and distribute again.
by performing this we were able to resolve this issue.
Warm regards,

Error while distributing customer model

hi,
i am getting the following error when i am trying to send data between two R/3 systems using distribution model
i am unable to distribute the model to the other system
Error:
"Target system is an external System. It does not support this function."
even after successfully generating partner profiles i am getting this error.
could someone help me out with this problem

Hi Siddharth
Can you please update about all the ALE setting that you have done before trying to distribute the model to the other system.
And whether you have put correctly - the sender and receiver while creating the distribution model. And, most importantly the partner profiles?
Please update..
Regards
Ashish

Getting the following error while creating the model for webdynpro app.

Plugin Name: Web Dynpro Model Editor Services
Plugin ID : com.sap.ide.webdynpro.service.modeleditor
Class :ap.ide.webdynpro.modeleditor.wizards.model. creation.ModelDialog
Method : nextPressed
Exception : org.eclipse.swt.SWTException: Failed to execute runnable (java.lang.NoClassDefFoundError)
This is the error i am getting while creating the model for the webdynpro application. Can some one help ?
Thanks & Regards
Lalith

hi
This error occurs mainly due to the reason that particular plugin is not there in the NWDS.
So please try to reinstall the NWDS or try tracing out whether that particular plugin is there or not.
Thank,
kris

Error in Distributing the model view

Hi,
I have clients 600, 610 & logical systems (ls_600, ls_610) in the same system.
I am trying to set up the ALE customizing and distribute the model view.
I have created RFC from 600 to 610 and the test connection is fine.
I have created a model view in which i have given sender system as LS_600 and
receiver system as LS_610 and the message type as MATMAS.
In the partner profile(WE20) of LS_610(client 600), in the outbound parameter SYNCH
i have given a port which uses the RFC to 610.
When i have tried to distribute the model view it is giving error as
'communication error occured. Username or password is not correct (Repeat Registration).'
I am not able to figure out the error.
There is also a partner profile as ls_600. Do i have to
make any changes there ?
Do i have to do something in the client 610 ?
Your help is highly appreciated.
Thanks,

Hi Prasad,
Please maintain the MATMAS & SYNCH Message type in the Outbound partner profiles of LS 610.
Test distributing the MATMAS IDoc's using BD10 without even maintaining Distribution Model.
And let me know if you are able to distribute the IDoc or not.
If you get the error. Please let me know the error.
Regards,
Krishna

Reg: Error while deploying the Model

Hello All,
I developed a Model in the VC.
The compilation of the model was successful.
But when I tried to deploy the model I'm getting an Error message saying :
"Error in executing a process for Flex compilation, Not enough space" .
Can anyone tell me what to do to resolve this problem ?
Regards,
Deepu.K

Hi colleagues,
We also encountered this problem here at our customer´s system .
We told the basis administrators to increase the disk space which did not solve our problem, though.
After successfully compiling the vc model
Deploying with FLEX2 results in an error as follows:
"Process is not executed!"
while deploying with flex1 resulits in the error
"Error in executing a process for Flex compilation, Not enough space"
Since everything has been working smoothly for the last months until now,
we wonder how this error has suddenly occured.
Does anyone have an idea how to trace the error or has anyone encountered this error, too?
Thanks in advance!
Gideon

Java.exe Error while creating the Model in Webdynpro

Hi,
I am creating the Model in Webdynpro Project. I have given the SAP r3 user id Passord details. after giving these details and clicking on next, it is giving an Error as " *Javaw.exe has got some problem needs to close. sorry for the inconvenence*". NWDS is getting closed if I click on Ok in the Pop-up window message.
I did re install the NWDS as well. but still the problem is persisting. and not able to proceed further.appreciate the quick resolution .
Rajyalakshmi
09739066796

hi
This error occurs mainly due to the reason that particular plugin is not there in the NWDS.
So please try to reinstall the NWDS or try tracing out whether that particular plugin is there or not.
Thank,
kris

Error while binding the model with the custom controller

Hi All,
I first started with a dummy project and in that binded the model with the custom controller.
For some reason, I deleted the project and created a new one. I have deleted the whole project from the workspace.
Now, when I am trying to bind the model again , I am getting an error when selecting the response parameters saying that DUPICATE ENTRIES.Ideally it should not happen when I am deleting it completely.
I am using a Webservice Model. Can any one help me out to resolve the same.
Looking forward for your response.
Regards
Dipendra

Hi Raman,
I did that and even I have Installed the IDE again.
Still I have that error.
Regards
Dipendra

Error in distributing the Model View in BD64

Hi Experts,
I have some problem in distributing model view in BD64. please see here the error details:
Model view <logical client> has not been updated
Reason: No authorization to create model view <logical client>
.....authorization object B_ALE_MODL
.....Parameter: activity 01, model view <logical client>
i have created full auth and B_ALE_MODL role for the specific account but still i cant proceed.
Please help.
Thank you,
Tony

Hi Experts,
In addition, this is in line with our integration between SRM 7.0 EHp1 SPS05 and ECC 6.0 EhP4 SPS03. both systems are running in windows 2003 64bit.
Edited by: Tony on Aug 3, 2011 4:30 AM

Error while sorting the model node table

hi
if(firstTime)
                 view.nowCreateAllCustomExtensionFields();
           IWDTable tab= (IWDTable)view.getElement("tbl_car");
           wdContext.currentContextElement().setCarTableSorter(new TableSorter(tab,wdThis.wdGetCarTableSorterAction(),null));
i have written the above code in domodifyview() {}
and   tbl_car is the id of the my table. and the table is of type
model node .
wdContext.currentContextElement().getCarTableSorter().sort(wdEvent,wdContext.nodeIt_Car_Data());
created a sort action for the table , present in the table
properties and iam getting a error under sort() saying
method sort(iwdcustomevent,iwdnode,string) is of type
tablesorter and not applicable for
(wdcustomevent,iprivateview.nodename)
can any one help me ?

replace
if(firstTime)
view.nowCreateAllCustomExtensionFields();
IWDTable tab= (IWDTable)view.getElement("tbl_car");
wdContext.currentContextElement().setCarTableSorter(new TableSorter(tab,wdThis.wdGetCarTableSorterAction(),null));
by
if(firstTime)
view.nowCreateAllCustomExtensionFields();
IWDTable tab= (IWDTable)view.getElement("tbl_car");
wdContext.currentContextElement().setCarTableSorter(new TableSorter(tab,wdThis.wdGetCarTableSorterAction(),new HashTable()));
nikhil

Error while deploying the model

Dear All,
When i try to deploy my developed model the Visual composer shows the following script error- http://<servername>:50000/VCRes/webContent/VisualCompser/6.00/bin/15595730.htm?122007.65
can any one provide the solution to get rid of this error.
with Regards,
Balachander

Hi Balachander,
is this the complete error message? Have you enabled the flex error messages:
<a href="https://wiki.sdn.sap.com/wiki/display/VC/ErrorinCompilingFlexApplication">https://wiki.sdn.sap.com/wiki/display/VC/ErrorinCompilingFlexApplication</a>?
Do you deploy in Flex? Which VC version and SPS are you using?
Best Regards,
Marcel

Error while dragging the table

Hi Folks,
I am getting the following error while dragging the model table on to the diagram tab(creating an interface).
Any Ideas??????
java.lang.NullPointerException
     at oracle.odi.interfaces.interactive.support.clauseimporters.ClauseImporterDefault.importClauses(ClauseImporterDefault.java:87)
     at oracle.odi.interfaces.interactive.support.actions.InterfaceActionAddSourceDataStore.performAction(InterfaceActionAddSourceDataStore.java:124)
     at oracle.odi.interfaces.interactive.support.InteractiveInterfaceHelperWithActions.performAction(InteractiveInterfaceHelperWithActions.java:845)
     at oracle.odi.interfaces.interactive.support.InteractiveInterfaceHelperWithActions.performAction(InteractiveInterfaceHelperWithActions.java:821)
     at oracle.odi.ui.OdiSdkEntityFactory.dropSourceDataStore(OdiSdkEntityFactory.java:523)
     at oracle.odi.ui.etlmodeler.diag.dragdrop.DiagramNodeDropHandler.dropObjects(DiagramNodeDropHandler.java:150)
     at oracle.diagram.framework.dragdrop.handler.DelegateChooserDropHandler.dropSelected(DelegateChooserDropHandler.java:386)
     at oracle.modeler.dnd.ModelerTCDropHandler.access$001(ModelerTCDropHandler.java:69)
     at oracle.modeler.dnd.ModelerTCDropHandler$3.run(ModelerTCDropHandler.java:288)
     at oracle.modeler.dif.GraphicAdder.addImpl(GraphicAdder.java:387)
     at oracle.modeler.dif.GraphicAdder.addAndLayoutImpl(GraphicAdder.java:372)
     at oracle.modeler.dif.GraphicAdder.addSelectAndLayout(GraphicAdder.java:348)
     at oracle.modeler.dnd.ModelerTCDropHandler.dropSelected(ModelerTCDropHandler.java:284)
     at oracle.diagram.framework.dragdrop.handler.DelegateChooserDropHandler.drop(DelegateChooserDropHandler.java:150)
     at oracle.diagram.framework.dragdrop.DefaultDropPlugin.drop(DefaultDropPlugin.java:115)
     at oracle.modeler.dnd.ModelerDropPlugin.drop(ModelerDropPlugin.java:100)
     at oracle.diagram.framework.dragdrop.DropTargetHelper.drop(DropTargetHelper.java:188)
     at oracle.diagram.framework.dragdrop.ManagerViewDragAndDropController$MyDropTargetListener.drop(ManagerViewDragAndDropController.java:802)
     at java.awt.dnd.DropTarget.drop(DropTarget.java:434)
     at sun.awt.dnd.SunDropTargetContextPeer.processDropMessage(SunDropTargetContextPeer.java:519)
     at sun.awt.dnd.SunDropTargetContextPeer$EventDispatcher.dispatchDropEvent(SunDropTargetContextPeer.java:832)
     at sun.awt.dnd.SunDropTargetContextPeer$EventDispatcher.dispatchEvent(SunDropTargetContextPeer.java:756)
     at sun.awt.dnd.SunDropTargetEvent.dispatch(SunDropTargetEvent.java:30)
     at java.awt.Component.dispatchEventImpl(Component.java:4508)
     at java.awt.Container.dispatchEventImpl(Container.java:2099)
     at java.awt.Component.dispatchEvent(Component.java:4481)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4577)
     at java.awt.LightweightDispatcher.processDropTargetEvent(Container.java:4312)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4163)
     at java.awt.Container.dispatchEventImpl(Container.java:2085)
     at java.awt.Window.dispatchEventImpl(Window.java:2478)
     at java.awt.Component.dispatchEvent(Component.java:4481)
     at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:643)
     at java.awt.EventQueue.access$000(EventQueue.java:84)
     at java.awt.EventQueue$1.run(EventQueue.java:602)
     at java.awt.EventQueue$1.run(EventQueue.java:600)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
     at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:98)
     at java.awt.EventQueue$2.run(EventQueue.java:616)
     at java.awt.EventQueue$2.run(EventQueue.java:614)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:613)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
Thanks in advance
R

Did you tryed to refresh your model or delete and re-import it ?

Java Script Error while deploying a Model with Value Help

Hi,
I am using EP 7.0 SP 10.
I am trying to deploy a model which includes the Value Help for an Input field, and i am trying to deploy this model.
The model compiles successfully, but gives a Java Script Error while deploying the model,
! Error on Page
When Click on this java script error, it shows that ,
Line:14985
Char 1: Error
object does n't support this property or method.
code
URL: <serverhost>/VCRes/WebContent/VisualComposer6.0/bin/223334.htm?24102006.1712.
The Same model works in dev server, and it fails in the production server.
Thanks and Regards,
Sekar

Hi jakob,
Thankyou for your quick response.
I did a basic model with the help of a documentation which i got from this forums.I created a iView and from there i used Bapi "BAPI_SALESORDER ".
I created a Input Form and a outpot form (table view).I tested model and am able to get the output.but when i try to deploy it is giving me the error.
And i think am not paring any formulas here.
Please guide me.
thanks and regrads
Pradeep.B

Error - Distributing the Model using BD64

Hi! All
Not able to distribute the model from the Sender System.
Error : Model view ZDMKANBAN has been changed
While Generating the Partner Profile able to generate Partner, Port, Outbound parameter from the Sender System.
but if i execute an IDOC through WE19 able to get the Status - 03 for Sender System & Status - 53 for Receiver System
when i try to transfer IDOC from Sender System to Receiver System could not do it.
Hope so bz of error occurred in Distribution Model. Is it So
kindly help me.

you have to distribute the distribution model in its new version

Excel, PowerView error in SharePoint 2013: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source."

I've installed SQL Server 2012 SP1 + SP server 2012 + SSRS and PowerPivot add-in.
I also configured excel services correctly. Everything works fine but the powerview doesn't work!
While I open an excel workbook consist of a PowerView report an error occurs: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions
to access the data source."
error detail:
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="http://www.microsoft.com/sql/reportingservices">An
error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3128.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the
data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source></Source><Message>For more information about this error navigate
to the report server on the local server machine, or enable remote errors</Message></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
Please help me to solve this issue. I don't know if uploading the excel workbook is enough or maybe It needed to connect to another data source.
I Appreciate in advance.

Hi Ali.y,
Based on the current error message, the error can be related to the
Claims to Windows Token Service (C2WTS) and is an expected error under certain conditions. To verify the issue, please check the aspects below:
     1. The C2WTS Windows service and C2WTS SharePoint service are both running.
     2. Check the SQL Server Browser service is running on the machine that has the PowerPivot instance of SSAS.
     3. Check the domain. You're signing into SharePoint with a user account in some domain (call it Domain A). When Domain A is equal to Domain B which SharePoint server itself is located (they're the same domain), or Domain
A trusts Domain B.
In addition, the error may be caused by Kerberos authentication issue due to missing SPN. In order to make the Kerberos authentication work, you need to configure the Analysis Services to run under a domain account, and register the SPNs for the Analysis
Services server.
To create the SPN for the Analysis Services server that is running under a domain account, run the following commands at a command prompt:
• Setspn.exe -S MSOLAPSvc.3/Fully_Qualified_domainName OLAP_Service_Startup_Account
Note: Fully_Qualified_domainName is a placeholder for the FQDN.
• Setspn.exe -S MSOLAPSvc.3/serverHostName OLAP_Service_Startup_Account
For more information, please see:
How to configure SQL Reporting Services 2012 in SharePoint Server 2010 / 2013 for Kerberos authentication
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

Error while distributing the model

Similar Messages

Maybe you are looking for