Error while duplicate database for standby
Hello Guys,
Both of my database are 10gR2 and Linux is the operating system.
I am trying to create a standby database for my production database.
I have matched the directory structure of primary and standby database and there is no conflict. Directory permissions are also set.
After taking the rman backup from production database when i connect auxiliary database from production. I run this command to duplicate database and create standby database.
rman
set until sequence XXXX;
duplicate target database for standby dorecover nofilenamecheck;
I get this error:
executing Memory Script
executing command: SET until clause
Starting restore at 04-JUN-11
using channel ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: starting datafile backupset restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece /tmp/backup_files/standby_control_1jme2far_1_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 06/04/2011 21:00:37
RMAN-03015: error occurred in stored script Memory Script
ORA-19870: error reading backup piece /tmp/backup_files/standby_control_1jme2far_1_1
ORA-01565: error in identifying file '/u01/app/oracle/product/10.2.0/db_1/dbs/spfileORCL.ora'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
*/tmp/backup_files/standby_control_1jme2far_1_1 file exists*
* spfileORCL.ora* exists on both servers in same directory and same path.
Can you please suggest where is the problem?
Thank you so much.
Imran
ORA-19870: error reading backup piece /tmp/backup_files/standby_control_1jme2far_1_1
ORA-01565: error in identifying file '/u01/app/oracle/product/10.2.0/db_1/dbs/spfileORCL.ora'
ORA-27037: unable to obtain file statusLinux-x86_64 Error: 2: No such file or directory
Might the backup piece not exist or file is unae to read at this time. Can you check is this physically exist Or not?
And preferred to take new fresh backup and perform duplicate
Similar Messages
-
Error while duplicating database for building dataguard(standby)
RMAN> duplicate target database for standby dorecover;
Starting Duplicate Db at 25-MAY-13
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=17 device type=DISK
contents of Memory Script:
set until scn 874292;
sql clone "alter system set control_files =
''/u01/app/oracle/oradata/STANDBY/controlfile/o1_mf_8sz086mc_.ctl'', ''/u01/app/oracle/flash_recovery_area/STANDBY/controlfile/o1_mf_8sz087vk_.ctl'' comment=
''Set by RMAN'' scope=spfile";
restore clone standby controlfile;
executing Memory Script
executing command: SET until clause
sql statement: alter system set control_files = ''/u01/app/oracle/oradata/STANDBY/controlfile/o1_mf_8sz086mc_.ctl'', ''/u01/app/oracle/flash_recovery_area/STANDBY/controlfile/o1_mf_8sz087vk_.ctl'' comment= ''Set by RMAN'' scope=spfile
Starting restore at 25-MAY-13
using channel ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece /u01/PRBACKUP/0doahj1f_1_1
channel ORA_AUX_DISK_1: ORA-19870: error while restoring backup piece /u01/PRBACKUP/0doahj1f_1_1
ORA-19505: failed to identify file "/u01/PRBACKUP/0doahj1f_1_1"
ORA-27041: unable to open file
Linux Error: 13: Permission denied
Additional information: 9
failover to previous backup
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece /u01/PRBACKUP/0aoaeo7l_1_1
channel ORA_AUX_DISK_1: ORA-19870: error while restoring backup piece /u01/PRBACKUP/0aoaeo7l_1_1
ORA-19505: failed to identify file "/u01/PRBACKUP/0aoaeo7l_1_1"
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
failover to previous backup
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece /u01/PRBACKUP/08oaeo63_1_1
channel ORA_AUX_DISK_1: ORA-19870: error while restoring backup piece /u01/PRBACKUP/08oaeo63_1_1
ORA-19505: failed to identify file "/u01/PRBACKUP/08oaeo63_1_1"
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
failover to previous backup
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 05/25/2013 17:13:24
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06024: no backup or copy of the control file found to restore
can anybody tell me what should I do....Hello;
Kind of hard without seeing everything but based on this :
channel ORA_AUX_DISK_1: ORA-19870: error while restoring backup piece /u01/PRBACKUP/0doahj1f_1_1
ORA-19505: failed to identify file "/u01/PRBACKUP/0doahj1f_1_1"
ORA-27041: unable to open file
Linux Error: 13: Permission deniedIf appears you have an OS permission on "/u01/PRBACKUP/" or the file is just missing.
If it helps here are my notes on this :
http://www.visi.com/~mseberg/duprman.html
http://www.visi.com/~mseberg/duprman2.html
Best Regards
mseberg -
Error while duplicate database from one server to another server
Hi there,
I am practicing duplicate database from one single database server to another server. Hardware and driver path on 2 machines is the same. Here are my steps:
--------------------- Clone site:
1. modify listener.ora with content:
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost.localdomain)(PORT = 1521))
ADR_BASE_LISTENER = /u01/app/oracle
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = orcl)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/db_1)
(SID_NAME= orcl)
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER = ON
2. stop and start listener again, message show like :
Service “orcl” has 1 instance(s).
Instance “orcl”, status UNKNOWN, has 1 handler(s) for this service…
The command completed successfully
3. create pfile from spfile.
4. shutdown and startup nomount with pfile is new pfile create from step 3.
--------------------------------------- Source site
1. modify tnsnames.ora with content like:
VVCOREDB =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost.localdomain)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = vvcoredb)
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = 10.254.1.235) (PORT=1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
2. run command from rman like these:
rman> connect target sys@vvcoredb
rman> target database Password:
rman> connect auxiliary sys@orcl
rman> auxiliary database Password:
rman> DUPLICATE TARGET DATABASE to orcl from active database spfile nofilenamecheck;
Then the result show below:
Starting Duplicate Db at 24-SEP-12
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=63 device type=DISK
contents of Memory Script:
backup as copy reuse
targetfile '/u01/app/oracle/product/11.2.0/db_1/dbs/spfilevvcoredb.ora' auxiliary format
'/u01/app/oracle/product/11.2.0/db_1/dbs/spfileorcl.ora' ;
sql clone "alter system set spfile= ''/u01/app/oracle/product/11.2.0/db_1/dbs/spfileorcl.ora''";
executing Memory Script
Starting backup at 24-SEP-12
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=74 device type=DISK
Finished backup at 24-SEP-12
sql statement: alter system set spfile= ''/u01/app/oracle/product/11.2.0/db_1/dbs/spfileorcl.ora''
contents of Memory Script:
sql clone "alter system set db_name =
''ORCL'' comment=
''duplicate'' scope=spfile";
shutdown clone immediate;
startup clone nomount;
executing Memory Script
sql statement: alter system set db_name = ''ORCL'' comment= ''duplicate'' scope=spfile
Oracle instance shut down
connected to auxiliary database (not started)
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 09/24/2012 17:44:12
RMAN-03015: error occurred in stored script Memory Script
RMAN-04014: startup failed: ORA-01261: Parameter db_recovery_file_dest destination string cannot be translated
ORA-01262: Stat failed on a file destination directory
Linux-x86_64 Error: 2: No such file or directory
I don't know what wrong with my pfile? I specify correct my pfile on clone site like this:
orcl.__db_cache_size=1476395008
orcl.__java_pool_size=16777216
orcl.__large_pool_size=16777216
orcl.__oracle_base='/u01/app/oracle'#ORACLE_BASE set from environment
orcl.__pga_aggregate_target=1342177280
orcl.__sga_target=1979711488
orcl.__shared_io_pool_size=0
orcl.__shared_pool_size=436207616
orcl.__streams_pool_size=0
*.audit_file_dest='/u01/app/oracle/admin/orcl/adump'
*.audit_trail='db'
*.compatible='11.2.0.0.0'
*.control_files='/u01/app/oracle/oradata/orcl/control01.ctl','/u01/app/oracle/flash_recovery_area/orcl/control02.ctl'
*.db_block_size=8192
*.db_domain=''
*.db_name='orcl'
*.db_recovery_file_dest='/u01/app/oracle/flash_recovery_area/vvcoredb'
*.db_recovery_file_dest_size=4070572032
*.diagnostic_dest='/u01/app/oracle'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=orclXDB)'
*.memory_target=3313500160
*.open_cursors=300
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.undo_tablespace='UNDOTBS1'
Please suggest me do i miss some steps when try to duplicate database?
Any suggestions are welcome.
Thanks in advance!
P/s: Sorry for my bad English.Oh god, it worked. Thank you. But i got another problem like this:
duplicate target database to orcl from active database spfile set "db_recovery_file_dest" = "/u01/app/oracle/flash_recovery_area/vvcoredb" nofilenamecheck;
Starting Duplicate Db at 24-SEP-12
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=63 device type=DISK
contents of Memory Script:
backup as copy reuse
targetfile '/u01/app/oracle/product/11.2.0/db_1/dbs/spfilevvcoredb.ora' auxiliary format
'/u01/app/oracle/product/11.2.0/db_1/dbs/spfileorcl.ora' ;
sql clone "alter system set spfile= ''/u01/app/oracle/product/11.2.0/db_1/dbs/spfileorcl.ora''";
executing Memory Script
Starting backup at 24-SEP-12
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=74 device type=DISK
Finished backup at 24-SEP-12
sql statement: alter system set spfile= ''/u01/app/oracle/product/11.2.0/db_1/dbs/spfileorcl.ora''
contents of Memory Script:
sql clone "alter system set db_name =
''ORCL'' comment=
''duplicate'' scope=spfile";
sql clone "alter system set db_recovery_file_dest =
''/u01/app/oracle/flash_recovery_area/vvcoredb'' comment=
'''' scope=spfile";
shutdown clone immediate;
startup clone nomount;
executing Memory Script
sql statement: alter system set db_name = ''ORCL'' comment= ''duplicate'' scope=spfile
sql statement: alter system set db_recovery_file_dest = ''/u01/app/oracle/flash_recovery_area/vvcoredb'' comment= '''' scope=spfile
Oracle instance shut down
connected to auxiliary database (not started)
Oracle instance started
Total System Global Area 3307048960 bytes
Fixed Size 2217872 bytes
Variable Size 1811941488 bytes
Database Buffers 1476395008 bytes
Redo Buffers 16494592 bytes
contents of Memory Script:
sql clone "alter system set db_name =
''VVCOREDB'' comment=
''Modified by RMAN duplicate'' scope=spfile";
sql clone "alter system set db_unique_name =
''ORCL'' comment=
''Modified by RMAN duplicate'' scope=spfile";
shutdown clone immediate;
startup clone force nomount
backup as copy current controlfile auxiliary format '/u01/app/oracle/oradata/vvcoredb/control01.ctl';
restore clone controlfile to '/u01/app/oracle/recovery_area/vvcoredb/control02.ctl' from
'/u01/app/oracle/oradata/vvcoredb/control01.ctl';
alter clone database mount;
executing Memory Script
sql statement: alter system set db_name = ''VVCOREDB'' comment= ''Modified by RMAN duplicate'' scope=spfile
sql statement: alter system set db_unique_name = ''ORCL'' comment= ''Modified by RMAN duplicate'' scope=spfile
Oracle instance shut down
Oracle instance started
Total System Global Area 3307048960 bytes
Fixed Size 2217872 bytes
Variable Size 1811941488 bytes
Database Buffers 1476395008 bytes
Redo Buffers 16494592 bytes
Starting backup at 24-SEP-12
using channel ORA_DISK_1
channel ORA_DISK_1: starting datafile copy
copying current control file
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 09/24/2012 18:42:09
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 09/24/2012 18:42:09
ORA-17628: Oracle error 19505 returned by remote Oracle server
I have a comment that source site doesn't have flash_recovery_area, instead it's name is recovery_area, is it problem?
Edited by: 788420 on Sep 24, 2012 4:44 AM -
Duplicate database FOR STANDBY DORECOVER which point of time
Hi,
please clarify to which point of time option DORECOVER will recover standby database 10.2.0.3
- to start of duplicate command time
- as far as archivelog are provided ?
- some other option :)
Regards.
GregThe name logged in the controlfile when the ArchiveLog was created !
(Thus, even if you keep changing the log_archive_dest for a database -- e.g. to switch between two different filesystems -- Oracle maintains the fully qualified path name).
OT :
However : not related to your DUPLICATE FOR STANDBY ..... but, for example, when doing a RECOVER USING BACKUP CONTROLFILE : if the archivelog filename is not in the controlfile (as the archivelog is "future" to the controlfile backup), Oracle generates the file name from log_archive_dest and log_archive_format, although here, too, you can override the generated name with a SET ARCHIVELOG DESTINATION in RMAN and LOGFILE clause in SQLPlus RECOVER.
Hemant K Chitale -
Duplicate database for standby from active database
I'm running 11.1.0.7. Has anybody ever duplicated a standby database from active database and the active database being a physical standby open for read only with active dataguard instead of a primary dataguard database?
The key here is location. The primary is located at a remote site where network bandwidth is inadequate for fast copy of database. The active standby database is at same site where I would like to build the new physical standby.I don't think you can, because "You cannot CONNECT RMAN to the standby database and then use DUPLICATE ... FOR STANDBY to create an additional standby database " and you can't fake it out by getting a controlfile from the primary because the controlfile has to match up with the backup and can't be a standby.
But I'm wondering if you could failover to the standby, duplicate, fail back, then... oh well, that will never work either, incarnation problem.
Snapshot standby? Could one back it up, then flashback restored new standby, change dbid? I would guess there would be an SCN problem, but don't know enough about it. -
Error while configuring database for foundation service on EPM 11.1.2.1
Hi,
I have installed the foundation service and the database is Oracle. Before I tried to configue database for it, I created a tablespace naming HYPFS in Oracle and also I created a user HYPFS whose default tablespace is HYPFS. I gave the user CONNECT and RESOURCE role, the privilege is also enough as SYSDBA.
In the configue panal, I entered the sid as orcl, the username is HYPFS and password *********, but I clicked the next step ,there came out an error. When I read the relavent log, the error is as folllows:
[2012-05-22T14:34:18.718-12:00] [EPMREG] [ERROR] [EPMREG-11073] [oracle.EPMREG.REG] [tid: 35] [ecid: 0000JTrYrcZFs1apxKc9yW1Fj45I00000N,0] execute SQL INSERT INTO HSS_COMPONENT_PROPERTY_VALUES(PROPERTY_VALUE, PROPERTY_NAME, COMPONENT_ID) VALUES(?, ?, ?) error。
[2012-05-22T14:34:18.718-12:00] [EPMREG] [ERROR] [EPMREG-11099] [oracle.EPMREG.REG] [tid: 35] [ecid: 0000JTrYrcZFs1apxKc9yW1Fj45I00000N,0]
java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist.
Should these tables like HSS_* be created automatically? How comes out such kind of error? Does anyone have any idea? Thanks in advance.Hi,
How are you creating the tablespace and user?
Name of the Tablespace and User should be in Capslock otherwise it gives issues
Is it through SQL Plus or through the Web Console?
Login to SQL Plus and try to execute the following query. I am assuming that oracle is installed on the C drive. The path of data file is valid only if it is on C drive
CREATE SMALLFILE TABLESPACE "HYPFS1" DATAFILE 'C:\app\Administrator\oradata\orcl\HYPFS1' SIZE 100M REUSE AUTOEXTEND ON NEXT 100M MAXSIZE 32767M LOGGING EXTENT MANAGEMENT LOCAL SEGMENT SPACE MANAGEMENT AUTO DEFAULT NOCOMPRESS;After the tablespace is created provide with the following rights
CREATE USER "HYPFS1" PROFILE "DEFAULT" IDENTIFIED BY "password" DEFAULT TABLESPACE "HYPFS1" TEMPORARY TABLESPACE "TEMP" ACCOUNT UNLOCK;
GRANT UNLIMITED TABLESPACE TO "HYPFS1" WITH ADMIN OPTION;
GRANT "CONNECT" TO "HYPFS1" WITH ADMIN OPTION;
GRANT "DBA" TO "HYPFS1" WITH ADMIN OPTION;Then try to connect
Database Type : Oracle's Driver(Thin)
Server : localhost
Port : 1521
SID: orcl
Username : Whatever username you have provided/HYPFS1
Password : Password provided for the userand then try to connect.
Thanks
Saurabh
Edited by: Saurabh on May 22, 2012 2:09 AM -
Duplicate target database for standby failing with below error
Hello All, Need your assistance
We are creating a physical standby database (standalone) from 2 node RAC database, OS =RHEL5 and DB =11gR2
What we did: We took RMAN backup of primary DB along with archives and copied to standby server in same location. We have modified necessory prameters on primary as well as standby too.
The command we used :
RMAN>connect target sys/pwd@primary auxiliary sys/pwd@stdby
RMAN> run {
allocate auxiliary channel ch1 type disk;
duplicate target database for standby dorecover nofilenamecheck;
release channel ch1;
Note we tried : duplicate target database for standby as well as duplicate target database for standby nofilenamecheck methods too....But no luck..we are getting following error.
channel ch1: reading from backup piece /u01/BDB/BWFCCPRD_5fmpdvce_1_1
channel ch1: ORA-19870: error while restoring backup piece /u01/BDB/BWFCCPRD_5fmpdvce_1_1
ORA-19501: read error on file "/u01/BDB/BWFCCPRD_5fmpdvce_1_1", block number 121856 (block size=8192)
ORA-27072: File I/O error
Additional information: 4
Additional information: 121856
Additional information: 1036288
failover to previous backup
released channel: ch1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 10/20/2011 09:16:11
RMAN-05501: aborting duplication of target database
RMAN-05556: not all datafiles have backups that can be recovered to SCN 41855007833
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
could you pease help to resolve this ....?
Note : Creating standby using RMAN 11g new feature : duplicate target database for standby from active database is not possible in our environment since the network bandwith is tooooo low, We have tried and not able to succeed because of n/w issue, So we are doing this alternate method...!!!
Looking for your valuable advises...
Thanks in Advance....Take the fresh backup and also check the space crunch. The below clink may help you
ORA-27072: File I/O error Additional information: 2
--neeraj
Edited by: Vishen on Oct 20, 2011 2:14 PM -
Duplicate target database for standby backup location.... errors out
Hi ,
i am getting below error while executing
RMAN> duplicate target database for standby backup location '/rman1/perf/brmbkpdg' nofilenamecheck dorecover ;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00558: error encountered while parsing input commands
RMAN-01009: syntax error: found "backup": expecting one of: "dorecover, db_file_name_convert, from, nofilenamecheck, ;, spfile"
RMAN-01007: at line 1 column 39 file: standard input
Can you please suggest a fix or what should be the syntax
Thanks
NaveenIf it helps here are my tested commands: (Oracle 11)
PRIMARY
RMAN RUN {
allocate channel d1 type disk;
backup format '/u01/backups/PRIMARY/df_t%t_s%s_p%p' database;
sql 'alter system archive log current';
backup format '/u01/backups/PRIMARY/al_t%t_s%s_p%p' archivelog all;
backup current controlfile for standby format '/u01/backups/PRIMARY/sb_t%t_s%s_p%p';
release channel d1;
STANDBY
RMAN> run {
allocate channel C1 device type disk;
allocate auxiliary channel C2 device type disk;
duplicate target database for standby nofilenamecheck;
My how to notes are here :
http://www.visi.com/~mseberg/duprman.html
Please note these were written not to create but to recover a standby, you still have to set up forced logging and the net80 in advance.
Best Regards
mseberg -
When executing 'duplicate target database for standby from active' the system tablespace/datafile (datafile 1) is not cloned. All other datafiles clone successfully. The RMAN process aborts with the following errors while attempting to clone the system tablespace/datafile.
ORA-19558: error de-allocating device
ORA-19557: device error, device type: DISK, device name:
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
ORA-03135: connection lost contact
Here are the details:
Primary is 11.2.0.2 RAC database on an Exadata platform
Standby is 11.2.0.2 Single Instance database (same patch level as primary) on a Red Hat Linux box
This is an ASM to ASM duplication.
This is not unique to this database. We tried another database and go the same behavior - all datafiles clone successfully with the exception of the system tablespace/datafile.
We have traced the RMAN execution and it seems to fail when it is trying to assign a NEWNAME to the system tablespace/datafile.
We even issued an explicit SET NEWNAME command but RMAN ignored it.
We also shutdown the primary and started is up in mount mode thinking that something had ahold of the System Tablespace/datafile.
We also opened up the network firewall to allow permit any,any traffic.
We increased the max_server_processes
and added TCP.NODELAY=yes to the sqlnet.ora file.
There seems to be some artifact present in our Primary System tablespace/data file that is preventing it form being cloned.
checked all alert files grid, asm, and dbhome - no abnormal messages.
We are in the process of restoring the database from a backup but we would prefer to get this working using the 'Active Database' methodologyI successfully created the standby database using RMAN backup and recovery.
I started the managed recovery. Archive logs are being sent from the primary to the standby ( I can see them in ASM), but the standby is not applying them.
I get the following messages in the standby alert log...
Fetching gap sequence in thread 2, gap sequence 154158-154257
Tue Nov 26 16:19:58 2013
Using STANDBY_ARCHIVE_DEST parameter default value as USE_DB_RECOVERY_FILE_DEST
Using STANDBY_ARCHIVE_DEST parameter default value as USE_DB_RECOVERY_FILE_DEST
Tue Nov 26 16:20:01 2013
Fetching gap sequence in thread 2, gap sequence 154158-154257
Tue Nov 26 16:20:11 2013
Fetching gap sequence in thread 2, gap sequence 154158-154257
Tue Nov 26 16:20:22 2013
Fetching gap sequence in thread 2, gap sequence 154158-154257
Tue Nov 26 16:20:32 2013
Fetching gap sequence in thread 2, gap sequence 154158-154257
I don't see any MRP processes:
select process,
status,
thread#,
sequence#,
block#,
blocks
7 from v$managed_standby;
PROCESS STATUS THREAD# SEQUENCE# BLOCK# BLOCKS
ARCH CLOSING 2 154363 1 132
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
RFS IDLE 0 0 0 0
RFS IDLE 1 145418 121 1
RFS IDLE 0 0 0 0
PROCESS STATUS THREAD# SEQUENCE# BLOCK# BLOCKS
RFS IDLE 0 0 0 0
12 rows selected.
SQL> SELECT THREAD#, SEQUENCE#, APPLIED FROM V$ARCHIVED_LOG;
THREAD# SEQUENCE# APPLIED
2 154356 NO
2 154357 NO
1 145411 NO
2 154358 NO
2 154360 NO
2 154361 NO
1 145414 NO
1 145415 NO
2 154362 NO
2 154363 NO
1 145416 NO
11 rows selected.
I do have the archive logs that cover sequences 154158-154257
Crosschecked 38 objects
Crosschecked 62 objects
Finished implicit crosscheck backup at 26-NOV-13
Starting implicit crosscheck copy at 26-NOV-13
using channel ORA_DISK_1
using channel ORA_DISK_2
Crosschecked 2 objects
archived log file name=+RECO_XORA/nmuasb00/archivelog/2013_11_26/thread_2_seq_154377.344.832521989 RECID=29 STAMP=832521990
validation succeeded for archived log
archived log file name=+RECO_XORA/nmuasb00/archivelog/2013_11_26/thread_2_seq_154378.346.832521991 RECID=31 STAMP=832521993
Crosschecked 31 objects -
RMAN 11gR2 DUPLICATE TARGET FOR STANDBY FROM ACTIVE DATABASE - Issue -HELP
First question.
Can primary and standby database have the same SID name?
As I recall it is yes.
I believe they must have different GLOBAL or DB_UNIQUE_NAME?
Anyway, RMAN I believe is telling me it is having problems copying control file on first and dies.
Permissions Issue on STANDBY machine?
RMAN> connect target backup_admin/backup_admin
connected to target database: LABDG (DBID=1973403623)
RMAN> connect auxiliary sys/oracle@STANDBY;
connected to auxiliary database: LABDG (not mounted)
RMAN> DUPLICATE TARGET DATABASE FOR STANDBY FROM ACTIVE DATABASE;
Starting Duplicate Db at 18-JUL-11
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=10 device type=DISK
contents of Memory Script:
backup as copy reuse
targetfile '/u01/app/oracle/product/11.2.0/dbhome_1/dbs/orapwLABDG' auxiliar
'/u01/app/oracle/product/11.2.0/dbhome_1/dbs/orapwLABDG' ;
executing Memory Script
Starting backup at 18-JUL-11
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=151 device type=DISK
Finished backup at 18-JUL-11
contents of Memory Script:
backup as copy current controlfile for standby auxiliary format '/u01/oradat
restore clone controlfile to '/u01/app/oracle/flash_recovery_area/LABDG/cont
'/u01/oradata/LABDG/control01.ctl';
executing Memory Script
Starting backup at 18-JUL-11
using channel ORA_DISK_1
channel ORA_DISK_1: starting datafile copy
copying standby control file
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 07/18/2011 11:20:54
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 07/18/2011 11:20:
ORA-17628: Oracle error 19505 returned by remote Oracle serverHi,
Permissions Issue on STANDBY machine?First problem I see is the sysdba password must be the same on both sides (target and auxiliary dbs).
From the documentation.
The source database and auxiliary instances must use the same SYSDBA password, which means that both instances must have password files. You can
create the password file with a single password so you can start the auxiliary instance and enable the source database to connect to it.Check all prereqs for the standby db duplicate here.
http://download.oracle.com/docs/cd/E11882_01/backup.112/e10643/rcmsynta020.htm#i81724
Rgds,
Tycho -
Duplicate target database for standby failing ...
hi,
below is the message reported at the end of rman session log:
channel ORA_AUX_DISK_1: restore complete, elapsed time: 01:09:50
failover to previous backup
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 07/10/2011 21:01:34
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
RMAN>
10.2.0.5/HPUX 11.31.
running "duplicate target database for standby" ...
pl. help to understand and troubleshoot..
regards,
XRMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
running "duplicate target database for standby" ...
pl. help to understand and troubleshoot..refet this metalink note
*Rman Restore Fails With 'RMAN-06023: no backup ...of datafile .. to restore' Although Backup is Available [ID 793401.1]* -
ORA-00119,ORA-00132 during duplicate target database for standby in 11gR2
I am running
duplicate target database for standby from active database
command from RMAN.
I went thru step-by-step on how to create a standby database from the textbook i got from my Oracle Univ. 11g Data Guard course. I set up all the listener.ora and tnsnames.ora files using netmgr, but I'm getting local_listener error.
Here's what I am running in rman:
run {
allocate channel prmy1 type disk;
allocate channel prmy2 type disk;
allocate channel prmy3 type disk;
allocate channel prmy4 type disk;
allocate auxiliary channel stby type disk;
duplicate target database for standby from active database
spfile
parameter_value_convert 'kyledb','kylerep'
set db_unique_name='kylerep'
set db_file_name_convert='/kyledb/','/kylerep/'
set log_file_name_convert='/kyledb/','/kylerep/'
set control_files='/oradata/kylerep/control01.ctl'
set log_archive_max_processes='4'
set fal_client='kylerep'
set fal_server='kyledb'
set standby_file_management='AUTO'
set log_archive_config='dg_config=(kyledb,kylerep)'
set log_archive_dest_1='service=kyledb ASYNC valid_for=(ONLINE_LOGFILE,PRIMARY_ROLE) db_unique_name=kyledb'
And here's the error i get:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 07/12/2010 17:33:28
RMAN-03015: error occurred in stored script Memory Script
RMAN-04014: startup failed: ORA-00119: invalid specification for system parameter LOCAL_LISTENER
ORA-00132: syntax error or unresolved network name 'LISTENER_KYLEDB'
result of
SQL>show parameter local_listener;
is
NAME TYPE VALUE
local_listener string LISTENER_KYLEDB
entry in my listener.ora is
SID_LIST_KYLEDB_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = kyledb.kyledev.usms.doj.gov)
(ORACLE_HOME = /app/oracle/product/11.2.0/dbhome_1)
(SID_NAME = kyledb)
ADR_BASE_KYLEDB_LISTENER = /app/oracle
KYLEDB_LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = kyledev.usms.doj.gov)(PORT = 7898))
and entry in tnsnames.ora file is
KYLEREP =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = kyledbdev.usms.doj.gov)(PORT = 7898))
(CONNECT_DATA =
(SERVICE_NAME = kylerep.kyledbdev.usms.doj.gov)
KYLEDB =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = kyledev.usms.doj.gov)(PORT = 7898))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = kyledb.kyledev.usms.doj.gov)
LISTENER_KYLEDB =
(ADDRESS = (PROTOCOL = TCP)(HOST = kyledev.usms.doj.gov)(PORT = 7898))
Can anyone help me figure out what went wrong?
Thanks in advance....I had the same problem,
I Define TNS_ADMIN environment on script an resolve my problem.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of startup command at 10/08/2010 17:21:15
RMAN-04014: startup failed: ORA-00119: invalid specification for system parameter LOCAL_LISTENER
ORA-00132: syntax error or unresolved network name 'LISTENER_DESENV2'
In my shell increase the Environment:
## VARIAVEIS
export NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1
export ORACLE_HOME=/u01/app/oracle/product/10.2.0/db1
export PATH=$ORACLE_HOME/bin:$PATH
export TNS_ADMIN=/u01/app/oracle/product/10.2.0/asm1/network/admin
export ORACLE_SID=$1
## CHAMADA RMAN
rman target / log=/u02/backup/db$1/bkp_cold-$1.log cmdfile=/home/oracle/script/rman/cold_backup/cold_backup.rcv
After this:
RMAN> run{
2> shutdown immediate;
3> startup force mount;
4> backup database include current controlfile tag 'BKP_COLD_FULL';
5> alter database open;
6> delete obsolete;
7> }
8>
9>
using target database control file instead of recovery catalog
database closed
database dismounted
Oracle instance shut down
Oracle instance started
database mounted
Total System Global Area 1073741824 bytes
Fixed Size 2089400 bytes
Variable Size 264244808 bytes
Database Buffers 801112064 bytes
Redo Buffers 6295552 bytes
Hope this helps and sorry for my terrible English! =) -
Duplicate target database for standby failed
Hi,
Im trying to uplicate target database for standby and get error message bellow :
RMAN> DUPLICATE TARGET DATABASE
2> FOR STANDBY
3> FROM ACTIVE DATABASE
4> DORECOVER
5> SPFILE
6> SET db_unique_name='dgtst' COMMENT 'Is standby'
7> SET LOG_ARCHIVE_DEST_2='SERVICE=dgtst ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=dgtst'
8> SET FAL_SERVER='dgtst' COMMENT 'Is primary'
9> NOFILENAMECHECK;
Starting Duplicate Db at 24-FEB-12
using target database control file instead of recovery catalog
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 02/24/2012 22:51:21
RMAN-05501: aborting duplication of target database
RMAN-03009: failure of allocate command on ORA_AUX_SBT_TAPE_1 channel at 02/24/2012 22:51:21
ORA-19554: error allocating device, device type: SBT_TAPE, device name:
ORA-27211: Failed to load Media Management Library
Additional information: 2Please advice
ThanksHello mseberg,
Actually you find the problem .....
Adding the following softlink helped :
ln -s /opt/omni/lib/libob2oracle8_64bit.so /u01/app/oracle/product/11.2.0/DG11gR2TST/lib/libobk.so
I run the duplicate command and its look much better:
$ rman TARGET sys/mysyspass@dgtst AUXILIARY sys/mysyspass@drtst
Recovery Manager: Release 11.2.0.2.0 - Production on Sat Feb 25 07:43:15 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: DGTST (DBID=244743902) <<<=== connected
connected to auxiliary database: DGTST (not mounted) <<<=== connected
RMAN> DUPLICATE TARGET DATABASE
2> FOR STANDBY
3> FROM ACTIVE DATABASE
4> DORECOVER
5> SPFILE
6> SET db_unique_name='dgtst' COMMENT 'Is standby'
SET LOG_ARCHIVE_DEST_2='SERVICE=dgtst ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=dgtst'
7> 8> SET FAL_SERVER='dgtst' COMMENT 'Is primary'
9> NOFILENAMECHECK;
Starting Duplicate Db at 25-FEB-12
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_SBT_TAPE_1
channel ORA_AUX_SBT_TAPE_1: SID=156 device type=SBT_TAPE
channel ORA_AUX_SBT_TAPE_1: Data Protector A.06.11/PHSS_40470/PHSS_40471/DPSOL_00391/DPLNX_
allocated channel: ORA_AUX_SBT_TAPE_2
channel ORA_AUX_SBT_TAPE_2: SID=189 device type=SBT_TAPE
channel ORA_AUX_SBT_TAPE_2: Data Protector A.06.11/PHSS_40470/PHSS_40471/DPSOL_00391/DPLNX_
allocated channel: ORA_AUX_SBT_TAPE_16
channel ORA_AUX_SBT_TAPE_16: SID=129 device type=SBT_TAPE
channel ORA_AUX_SBT_TAPE_16: Data Protector A.06.11/PHSS_40470/PHSS_40471/DPSOL_00391/DPLNX_
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=160 device type=DISK
contents of Memory Script:
backup as copy reuse
targetfile '/u01/app/oracle/product/11.2.0/DG11gR2TST/dbs/orapwdgtst' auxiliary format
'/u01/app/oracle/product/11.2.0/DG11gR2TST/dbs/orapwdgtst' targetfile
'/u01/app/oracle/product/11.2.0/DG11gR2TST/dbs/spfiledgtst.ora' auxiliary format
'/u01/app/oracle/product/11.2.0/DG11gR2TST/dbs/spfiledgtst.ora' ;
sql clone "alter system set spfile= ''/u01/app/oracle/product/11.2.0/DG11gR2TST/dbs/spfiledgtst.ora''";
executing Memory Script
Starting backup at 25-FEB-12
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=21 device type=DISK
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 02/25/2012 07:44:02
ORA-17629: Cannot connect to the remote database server <<<<<<====
ORA-17627: ORA-12541: TNS:no listener <<<<<<====
ORA-17629: Cannot connect to the remote database server
continuing other job steps, job failed will not be re-run
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 02/25/2012 07:44:03
RMAN-05501: aborting duplication of target database
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 02/25/2012 07:44:03
ORA-17629: Cannot connect to the remote database server
ORA-17627: ORA-12541: TNS:no listener
ORA-17629: Cannot connect to the remote database serverAs you can see above rman successfully connected to the local and remote database.
It also successfully allocated the DISK channel , but than it failed on :
ORA-17627: ORA-12541: TNS:no listenerI cant understand why it happen:
$ tnsping dgtst
TNS Ping Utility for HPUX: Version 11.2.0.2.0 - Production on 25-FEB-2012 08:54:48
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = hercules)(PORT = 1528))) (CONNECT_DATA = (SERVICE_NAME = dgtst)))
OK (0 msec)
$ tnsping drtst
TNS Ping Utility for HPUX: Version 11.2.0.2.0 - Production on 25-FEB-2012 08:54:54
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = pulse)(PORT = 1528))) (CONNECT_DATA = (SERVICE_NAME = dgtst)))
OK (10 msec)And as you i show the rman successfully connect to both rempte and local as SYS user. -
I got the above error while i restore the standby database using RMAN backu
Dear All,
RMAN> crosscheck archivelog all;
using target database controlfile instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=14 devtype=DISK
specification does not match any archive log in the recovery catalogi got the above error while i restore the standby database using RMAN backup from production.
Help need.i take the backup without catalog database.
regards,
DBrman> list backup;
it shows lengthier but i showed only the corresponding
BS Key Type LV Size Device Type Elapsed Time Completion Time
3479 Full 17G DISK 01:29:42 09-FEB-13
BP Key: 3479 Status: AVAILABLE Tag: 09FEB13_FULL_ESMSRV1_DB
Piece Name: /oradatabkp/rman/esmsrv1_full_db_09feb13
SPFILE Included: Modification time: 08-FEB-13
List of Datafiles in backup set 3479
File LV Type Ckp SCN Ckp Time Name
1 Full 1759250260 09-FEB-13 /esmsrv1/dbs/system01.dbf
2 Full 1759250260 09-FEB-13 /esmsrv1/dbs/undotbs01.dbf
3 Full 1759250260 09-FEB-13 /esmsrv1/dbs/cwmlite01.dbf
4 Full 1759250260 09-FEB-13 /esmsrv1/dbs/drsys01.dbf
5 Full 1759250260 09-FEB-13 /esmsrv1/dbs/example01.dbf
6 Full 1759250260 09-FEB-13 /esmsrv1/dbs/indx01.dbf
7 Full 1759250260 09-FEB-13 /esmsrv1/dbs/odm01.dbf
8 Full 1759250260 09-FEB-13 /esmsrv1/dbs/tools01.dbf
9 Full 1759250260 09-FEB-13 /esmsrv1/dbs/users01.dbf
10 Full 1759250260 09-FEB-13 /esmsrv1/dbs/xdb01.dbf
11 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_default_seg_001.dbf
12 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_property_ind_seg_001.dbf
13 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_property_seg_001.dbf
14 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_upload_ind_seg_001.dbf
15 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_upload_seg_001.dbf
16 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_rate_ind_seg_001.dbf
17 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_rate_seg_001.dbf
18 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_summary_ind_seg_001.dbf
19 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_summary_seg_001.dbf
20 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_overflow_seg_001.dbf
21 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_overflow_seg_002.dbf
22 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_summary_seg_002.dbf
23 Full 1759250260 09-FEB-13 /esmsrv1/dbs/perfstat_001.dbf
39 Full 1759250260 09-FEB-13 /esmsrv1/dbs/oem_repository.dbf
BS Key Type LV Size Device Type Elapsed Time Completion Time
3480 Full 17G DISK 01:21:30 09-FEB-13
BP Key: 3480 Status: EXPIRED Tag: TAG20130209T200021
Piece Name: /oradatabkp/rman/esmsrv1/esmsrv1_full_Feb09
SPFILE Included: Modification time: 08-FEB-13
List of Datafiles in backup set 3480
File LV Type Ckp SCN Ckp Time Name
1 Full 1759422265 09-FEB-13 /esmsrv1/dbs/system01.dbf
2 Full 1759422265 09-FEB-13 /esmsrv1/dbs/undotbs01.dbf
3 Full 1759422265 09-FEB-13 /esmsrv1/dbs/cwmlite01.dbf
4 Full 1759422265 09-FEB-13 /esmsrv1/dbs/drsys01.dbf
5 Full 1759422265 09-FEB-13 /esmsrv1/dbs/example01.dbf
6 Full 1759422265 09-FEB-13 /esmsrv1/dbs/indx01.dbf
7 Full 1759422265 09-FEB-13 /esmsrv1/dbs/odm01.dbf
8 Full 1759422265 09-FEB-13 /esmsrv1/dbs/tools01.dbf
9 Full 1759422265 09-FEB-13 /esmsrv1/dbs/users01.dbf
10 Full 1759422265 09-FEB-13 /esmsrv1/dbs/xdb01.dbf
11 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_default_seg_001.dbf
12 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_property_ind_seg_001.dbf
13 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_property_seg_001.dbf
14 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_upload_ind_seg_001.dbf
15 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_upload_seg_001.dbf
16 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_rate_ind_seg_001.dbf
17 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_rate_seg_001.dbf
18 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_summary_ind_seg_001.dbf
19 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_summary_seg_001.dbf
20 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_overflow_seg_001.dbf
21 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_overflow_seg_002.dbf
22 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_summary_seg_002.dbf
23 Full 1759422265 09-FEB-13 /esmsrv1/dbs/perfstat_001.dbf
39 Full 1759422265 09-FEB-13 /esmsrv1/dbs/oem_repository.dbf
BS Key Type LV Size Device Type Elapsed Time Completion Time
3481 Full 4M DISK 00:00:03 09-FEB-13
BP Key: 3481 Status: AVAILABLE Tag: TAG20130209T212205
Piece Name: /oradatabkp/rman/esmsrv1/esmsrv1_controlfile_copy_Feb09
Controlfile Included: Ckp SCN: 1759462488 Ckp time: 09-FEB-13
BS Key Type LV Size Device Type Elapsed Time Completion Time
3482 Full 0 DISK 00:00:01 09-FEB-13
BP Key: 3482 Status: AVAILABLE Tag: TAG20130209T212212
Piece Name: /oradatabkp/rman/esmsrv1/esmsrv1_spfile_copy_Feb09
SPFILE Included: Modification time: 08-FEB-13
ls -l /oradatabkp
root@drsrv1#ls -l /oradatabkp
total 1108672
drwxr-xr-x 2 ovsd dba 96 Sep 27 2009 alert_bkp
-rw-r--r-- 1 oracle dba 195 Mar 15 2007 create.sql
drwxr-xr-x 2 oracle dba 8192 Aug 7 2009 ctrl_bkp
-rw-r--r-- 1 root sys 565114880 Apr 24 2007 drsrv1.tar
drwxrwxrwx 2 root sys 96 Jun 17 2011 drsrv2-ignitebkp
drwxr-xr-x 4 root sys 96 Apr 24 2007 esmsrv1
-rw-r----- 1 root sys 1613824 Feb 22 2007 esmsrv1stby.ctl
-rw-r--r-- 1 esmsrv1 dba 5120 Dec 31 2009 esmtables.dmp
-rw-r--r-- 1 esmsrv1 dba 538 Dec 31 2009 esmtables.log
drwxrwxrwx 4 root sys 8192 Mar 10 2009 export
drwxr-xr-x 8 root sys 8192 Apr 24 2007 finalbackup
-rw-r--r-- 1 oracle dba 3820 Sep 5 2008 invalid.sql
-rw-r--r-- 1 esmsrv1 dba 303104 Dec 31 2009 kirdevports.dmp
-rw-r--r-- 1 esmsrv1 dba 591 Dec 31 2009 kirdevports.log
drwxr-xr-x 2 root root 96 Feb 12 2007 lost+found
-rw-r--r-- 1 oracle dba 24954 Aug 9 2009 ovcontrol-090909.ctl
drwxr-xr-x 22 root sys 8192 Apr 24 2007 ovpi
drwxr-xr-x 2 oracle dba 8192 Aug 7 2009 pfile_bkp
drwxrw-rw- 4 oracle dba 8192 Feb 10 15:25 rman
drwxr-xr-x 28 root sys 8192 Feb 1 17:15 schedbkp
drwxr-xr-x 2 oracle dba 8192 Jul 11 2011 sdnnm
-rw-r--r-- 1 esmsrv1 dba 2196 Dec 31 2009 srirdevports.log
drwxr-xr-x 2 oracle dba 96 Mar 13 2009 statsreport
-rw-r--r-- 1 oracle dba 966 Mar 15 2007 tbs.sql
drwxr-xr-x 5 oracle dba 96 Mar 16 2007 testov
drwxr-xr-x 2 root sys 442368 Mar 11 2009 trendadm_files
root@drsrv1#ls -l /oradatabkp/rman
total 37244448
drwxr-xr-x 2 oracle dba 8192 Feb 10 15:25 esmsrv1
-rw-r----- 1 oracle dba 19068198912 Feb 9 14:21 esmsrv1_full_db_09feb13
drwxrw-rw- 2 oracle dba 8192 Feb 9 21:36 openview
-rw-r--r-- 1 oracle dba 920442 Feb 9 21:37 rmanbkp-all.log -
DUPLICATE TARGET DATABASE FOR STANDBY NOFILENAMECHECK DORECOVER;
Hi
Im a setting up one node physiscal standby for 2node 11.2 rac primary, what does DUPLICATE TARGET DATABASE FOR STANDBY NOFILENAMECHECK DORECOVER; do exactly?
does it do restore controlfile for standby , restore database; recover database?
I executed the command at about 2pm and the backup of primary was taken 1pm ( primary is on asm, i used this backup device type disk format '/u02/%U' database plus archivelog;
backup device type disk format '/u02/%U' current controlfile for standby; )
does this mean I will have to to restore any archivelogs that are generated after 1pm and manually copy them to standby ? or that data guard is smart enough to go and find them ?Hi,
the command will duplicate the target database and create a standby database (including standby controlfile) from the backup you have taken.
Then it will do the recovery with all archivelogs the standby system has access to.
When you setup data guard in the next step, it will detect which archivelogs are missing and the "GAP" resolution will kick in, transferring all archivelogs missing to bring the
standby database to the same timestamp.
With 11.2 I would recommend to specify "from active database" additionally, since this will not restore from backup, but restore from the primary database directly via. network.
This does not only save space, but will also recover to a more actual point (hence requiring less "GAP" resolution when you setup dataguard later).
Regards
Sebastian
Maybe you are looking for
-
Interest calculation type-Z-Penalty Interest Calculation
Hi all !! I would like to know about the Interest calculation type-Z-Penalty Interest Calculation, if it is necesary to do some aditional customizing , and which are the differences between Item Interest Calculation and Penalty Interest Calculation
-
Apple_ID_card_declined_for_this_country How can you expect the customer to have a LOCAL/COUNTRY Based Credit Card every where we go??? Last week I was on holiday in HK, and from my Hotel I was able to use m VN Credit Card with my Apple ID and purchas
-
Family Sharing with different App Store countries
Hi, I am registered with the UK App Store (my credit card being issued by a UK bank). I have invited other family members, who live in another nation and are with that nation App Store, to join my Family Sharing. As they tried to accept my invite, th
-
Bonjour Je suis doctorant à Grenoble, j'utilise des cartes d'acquisition pour acquérir des signaux de pression acoustique (16 exactement). Mes cartes sont des modules NI 9234 qui comportent 4 voies chacun je les utilises sur un châssis compact DAQ NI
-
Best way to set up Shared iPhoto Library for Family - individual user IDs
We have a iMAc shared by the family on which we want to establish an iPhoto library that we can all access and utlize. I have not found any good guidance on how best to set this up. Any suggestions or good references ? Thank you, John