Error while duplicate

While we were running duplicate, one of the Disk group ran out of space. But the restore continued with other datafiles.
Later we did manual recovery to bring the db up.
channel d5: ORA-19870: error while restoring backup piece <backup piece name>
ORA-19504: failed to create file "+DATA5"
ORA-17502: ksfdcre:4 Failed to create file +DATA5
ORA-15041: diskgroup space exhausted
But we recovered the database with those 6 missing datafiles by creating CF without those 6 data files.
After checking the datafiles, there are some datafiles named as MISSING and which are pointing to $ORACLE_HOME/dbs directory.
The DB is up and running.
How do i fix this ?

In your case, the recovery errored outNo, the recovery was completed without the example01.dbf file
in my case, the recovery went on fineit actually did error on the restore but you chose to ignore the error and then went on the exclude the datafiles from the controlfile
Is there a way to find map the table to a datafileNormally, DBA_EXTENTS could have been queried to identify the datafiles which contain the extents for a table. However, I doubt if you will be able to do so if the tablespace is locally managed.
Hemant K Chitale

Similar Messages

  • Error while duplicate database for standby

    Hello Guys,
    Both of my database are 10gR2 and Linux is the operating system.
    I am trying to create a standby database for my production database.
    I have matched the directory structure of primary and standby database and there is no conflict. Directory permissions are also set.
    After taking the rman backup from production database when i connect auxiliary database from production. I run this command to duplicate database and create standby database.
    rman
    set until sequence XXXX;
    duplicate target database for standby dorecover nofilenamecheck;
    I get this error:
    executing Memory Script
    executing command: SET until clause
    Starting restore at 04-JUN-11
    using channel ORA_AUX_DISK_1
    channel ORA_AUX_DISK_1: starting datafile backupset restore
    channel ORA_AUX_DISK_1: restoring control file
    channel ORA_AUX_DISK_1: reading from backup piece /tmp/backup_files/standby_control_1jme2far_1_1
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 06/04/2011 21:00:37
    RMAN-03015: error occurred in stored script Memory Script
    ORA-19870: error reading backup piece /tmp/backup_files/standby_control_1jme2far_1_1
    ORA-01565: error in identifying file '/u01/app/oracle/product/10.2.0/db_1/dbs/spfileORCL.ora'
    ORA-27037: unable to obtain file status
    Linux-x86_64 Error: 2: No such file or directory
    Additional information: 3
    */tmp/backup_files/standby_control_1jme2far_1_1 file exists*
    * spfileORCL.ora* exists on both servers in same directory and same path.
    Can you please suggest where is the problem?
    Thank you so much.
    Imran

    ORA-19870: error reading backup piece /tmp/backup_files/standby_control_1jme2far_1_1
    ORA-01565: error in identifying file '/u01/app/oracle/product/10.2.0/db_1/dbs/spfileORCL.ora'
    ORA-27037: unable to obtain file statusLinux-x86_64 Error: 2: No such file or directory
    Might the backup piece not exist or file is unae to read at this time. Can you check is this physically exist Or not?
    And preferred to take new fresh backup and perform duplicate

  • Error while duplicate database from one server to another server

    Hi there,
    I am practicing duplicate database from one single database server to another server. Hardware and driver path on 2 machines is the same. Here are my steps:
    --------------------- Clone site:
    1. modify listener.ora with content:
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
    (ADDRESS = (PROTOCOL = TCP)(HOST = localhost.localdomain)(PORT = 1521))
    ADR_BASE_LISTENER = /u01/app/oracle
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (GLOBAL_DBNAME = orcl)
    (ORACLE_HOME = /u01/app/oracle/product/11.2.0/db_1)
    (SID_NAME= orcl)
    ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER = ON
    2. stop and start listener again, message show like :
    Service “orcl” has 1 instance(s).
    Instance “orcl”, status UNKNOWN, has 1 handler(s) for this service…
    The command completed successfully
    3. create pfile from spfile.
    4. shutdown and startup nomount with pfile is new pfile create from step 3.
    --------------------------------------- Source site
    1. modify tnsnames.ora with content like:
    VVCOREDB =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = localhost.localdomain)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = vvcoredb)
    ORCL =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP) (HOST = 10.254.1.235) (PORT=1521))
    (CONNECT_DATA =
         (SERVER = DEDICATED)
         (SERVICE_NAME = orcl)
    2. run command from rman like these:
    rman> connect target sys@vvcoredb
    rman> target database Password:
    rman> connect auxiliary sys@orcl
    rman> auxiliary database Password:
    rman> DUPLICATE TARGET DATABASE to orcl from active database spfile nofilenamecheck;
    Then the result show below:
    Starting Duplicate Db at 24-SEP-12
    using target database control file instead of recovery catalog
    allocated channel: ORA_AUX_DISK_1
    channel ORA_AUX_DISK_1: SID=63 device type=DISK
    contents of Memory Script:
    backup as copy reuse
    targetfile '/u01/app/oracle/product/11.2.0/db_1/dbs/spfilevvcoredb.ora' auxiliary format
    '/u01/app/oracle/product/11.2.0/db_1/dbs/spfileorcl.ora' ;
    sql clone "alter system set spfile= ''/u01/app/oracle/product/11.2.0/db_1/dbs/spfileorcl.ora''";
    executing Memory Script
    Starting backup at 24-SEP-12
    allocated channel: ORA_DISK_1
    channel ORA_DISK_1: SID=74 device type=DISK
    Finished backup at 24-SEP-12
    sql statement: alter system set spfile= ''/u01/app/oracle/product/11.2.0/db_1/dbs/spfileorcl.ora''
    contents of Memory Script:
    sql clone "alter system set db_name =
    ''ORCL'' comment=
    ''duplicate'' scope=spfile";
    shutdown clone immediate;
    startup clone nomount;
    executing Memory Script
    sql statement: alter system set db_name = ''ORCL'' comment= ''duplicate'' scope=spfile
    Oracle instance shut down
    connected to auxiliary database (not started)
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 09/24/2012 17:44:12
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-04014: startup failed: ORA-01261: Parameter db_recovery_file_dest destination string cannot be translated
    ORA-01262: Stat failed on a file destination directory
    Linux-x86_64 Error: 2: No such file or directory
    I don't know what wrong with my pfile? I specify correct my pfile on clone site like this:
    orcl.__db_cache_size=1476395008
    orcl.__java_pool_size=16777216
    orcl.__large_pool_size=16777216
    orcl.__oracle_base='/u01/app/oracle'#ORACLE_BASE set from environment
    orcl.__pga_aggregate_target=1342177280
    orcl.__sga_target=1979711488
    orcl.__shared_io_pool_size=0
    orcl.__shared_pool_size=436207616
    orcl.__streams_pool_size=0
    *.audit_file_dest='/u01/app/oracle/admin/orcl/adump'
    *.audit_trail='db'
    *.compatible='11.2.0.0.0'
    *.control_files='/u01/app/oracle/oradata/orcl/control01.ctl','/u01/app/oracle/flash_recovery_area/orcl/control02.ctl'
    *.db_block_size=8192
    *.db_domain=''
    *.db_name='orcl'
    *.db_recovery_file_dest='/u01/app/oracle/flash_recovery_area/vvcoredb'
    *.db_recovery_file_dest_size=4070572032
    *.diagnostic_dest='/u01/app/oracle'
    *.dispatchers='(PROTOCOL=TCP) (SERVICE=orclXDB)'
    *.memory_target=3313500160
    *.open_cursors=300
    *.processes=150
    *.remote_login_passwordfile='EXCLUSIVE'
    *.undo_tablespace='UNDOTBS1'
    Please suggest me do i miss some steps when try to duplicate database?
    Any suggestions are welcome.
    Thanks in advance!
    P/s: Sorry for my bad English.

    Oh god, it worked. Thank you. But i got another problem like this:
    duplicate target database to orcl from active database spfile set "db_recovery_file_dest" = "/u01/app/oracle/flash_recovery_area/vvcoredb" nofilenamecheck;
    Starting Duplicate Db at 24-SEP-12
    using target database control file instead of recovery catalog
    allocated channel: ORA_AUX_DISK_1
    channel ORA_AUX_DISK_1: SID=63 device type=DISK
    contents of Memory Script:
    backup as copy reuse
    targetfile '/u01/app/oracle/product/11.2.0/db_1/dbs/spfilevvcoredb.ora' auxiliary format
    '/u01/app/oracle/product/11.2.0/db_1/dbs/spfileorcl.ora' ;
    sql clone "alter system set spfile= ''/u01/app/oracle/product/11.2.0/db_1/dbs/spfileorcl.ora''";
    executing Memory Script
    Starting backup at 24-SEP-12
    allocated channel: ORA_DISK_1
    channel ORA_DISK_1: SID=74 device type=DISK
    Finished backup at 24-SEP-12
    sql statement: alter system set spfile= ''/u01/app/oracle/product/11.2.0/db_1/dbs/spfileorcl.ora''
    contents of Memory Script:
    sql clone "alter system set db_name =
    ''ORCL'' comment=
    ''duplicate'' scope=spfile";
    sql clone "alter system set db_recovery_file_dest =
    ''/u01/app/oracle/flash_recovery_area/vvcoredb'' comment=
    '''' scope=spfile";
    shutdown clone immediate;
    startup clone nomount;
    executing Memory Script
    sql statement: alter system set db_name = ''ORCL'' comment= ''duplicate'' scope=spfile
    sql statement: alter system set db_recovery_file_dest = ''/u01/app/oracle/flash_recovery_area/vvcoredb'' comment= '''' scope=spfile
    Oracle instance shut down
    connected to auxiliary database (not started)
    Oracle instance started
    Total System Global Area 3307048960 bytes
    Fixed Size 2217872 bytes
    Variable Size 1811941488 bytes
    Database Buffers 1476395008 bytes
    Redo Buffers 16494592 bytes
    contents of Memory Script:
    sql clone "alter system set db_name =
    ''VVCOREDB'' comment=
    ''Modified by RMAN duplicate'' scope=spfile";
    sql clone "alter system set db_unique_name =
    ''ORCL'' comment=
    ''Modified by RMAN duplicate'' scope=spfile";
    shutdown clone immediate;
    startup clone force nomount
    backup as copy current controlfile auxiliary format '/u01/app/oracle/oradata/vvcoredb/control01.ctl';
    restore clone controlfile to '/u01/app/oracle/recovery_area/vvcoredb/control02.ctl' from
    '/u01/app/oracle/oradata/vvcoredb/control01.ctl';
    alter clone database mount;
    executing Memory Script
    sql statement: alter system set db_name = ''VVCOREDB'' comment= ''Modified by RMAN duplicate'' scope=spfile
    sql statement: alter system set db_unique_name = ''ORCL'' comment= ''Modified by RMAN duplicate'' scope=spfile
    Oracle instance shut down
    Oracle instance started
    Total System Global Area 3307048960 bytes
    Fixed Size 2217872 bytes
    Variable Size 1811941488 bytes
    Database Buffers 1476395008 bytes
    Redo Buffers 16494592 bytes
    Starting backup at 24-SEP-12
    using channel ORA_DISK_1
    channel ORA_DISK_1: starting datafile copy
    copying current control file
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 09/24/2012 18:42:09
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-03009: failure of backup command on ORA_DISK_1 channel at 09/24/2012 18:42:09
    ORA-17628: Oracle error 19505 returned by remote Oracle server
    I have a comment that source site doesn't have flash_recovery_area, instead it's name is recovery_area, is it problem?
    Edited by: 788420 on Sep 24, 2012 4:44 AM

  • There was an error while writing data back to the server: Failed to commit objects to server : Duplicate object name in the same folder.

    Post Author: dmface15
    CA Forum: Administration
    I am working in a new enviorment and i am trying to save a report to the Crystal Server via the CMC. I am uploading the report from the objects tab and attempting to save to a folder. The report has 1 static defined parameter and that's it. When i click submit to save the report i receive the following error message: "There was an error while writing data back to the server: Failed to commit objects to server : Duplicate object name in the same folder." There is not a anothe report within the folder with that name. What could be causing this error message and equally important, what is the solution.

    hte message you received about duplicate user probably means something hadn't fully updated yet. Once it did then it worked...
    Regards,
    Tim

  • BI 7.0 - Duplicate Record Error while loading master data

    I am working on BI 7.0 and I am trying to load master data to an info object.
    I created an Infopackage and loaded into PSA.
    I created transformation and DTP and I get an error after I execute the DTP about duplicate records.
    I have read all previous threads about duplicate record error while loading master data and most of the them suggested to check 'Ignore duplicate records' option in the infopackage. But in 7.0, I can only load to PSA with infopackage and it doesn't have any option for me to ignore duplicate records.
    My data is getting loaded to PSA fine and I get this error while loading to info object using DTP.
    I would appreciate your help to resolve this issue.
    Regards,
    Ram.

    Hi,
    Refer:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/45/2a8430131e03c3e10000000a1553f6/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/d0/538f3b294a7f2de10000000a11402f/frameset.htm
    With rgds,
    Anil Kumar Sharma .P

  • 36 duplicate record  found. -- error while loading master data

    Hello BW Experts,
    Error while loading master data
    ( green light )Update PSA ( 50000 Records posted ) No errors
    ( green light )Transfer rules ( 50000  „³ 50000 Records ): No errors
    ( green light )Update rules ( 50000 „³ 50000 Records ): No errors
    ( green light ) Update ( 0 new / 50000 changed ): No errors
    ( red light )Processing end: errors occurred
         Processing 2 finished
    ƒÞ     36 duplicate record found. 15718 recordings used in table /BIC/PZMATNUM
    ƒÞ     36 duplicate record found. 15718 recordings used in table /BIC/XZMATNUM
    This error repeats with all the data-packets.
    what could be the reason of the error. how to correct the error.
    Any suggestions appreciated.
    Thanks,
    BWer

    BWer,
    We have exactly the same issue when loading the infoobject 0PM_ORDER, the datasource is 0PM_ORDER_ATTR.
    The workaround we have been using is 'Manual push' from the details tab of the monitor. Weirdly we don't have this issue in our test and dev systems, even in Production, this doesn't occur somedays. We have all the necessary settings enabled in the infopackage.
    Did you figure out a solution for your issue, if so please let me know and likewise I will.
    -Venkat

  • Getting Duplicate data Records error while loading the Master data.

    Hi All,
    We are getting Duplicate data Records error while loading the Profit centre Master data. Master data contains time dependent attributes.
    the load is direct update. So i made it red and tried to reloaded from PSA even though it is throwing same error.
    I checked in PSA. Showing red which records have same Profit centre.
    Could any one give us any suggestions to resolve the issues please.
    Thanks & Regards,
    Raju

    Hi Raju,
            I assume there are no routines written in the update rules and also you ae directly loading the data from R/3 ( not from any ODS). If that is the case then it could be that, the data maintained in R/3 has overlapping time intervals (since  time dependency of attributes is involved). Check your PSA if the same profit center has time intervals which over lap. In that case, you need to get this fixed in R/3. If there are no overlapping time intervals, you can simply increase the error tolerance limit in your info-package and repeat the load.
    Hope this helps you.
    Thanks & Regards,
    Nithin Reddy.

  • Duplicate Error while loading data to Write Optimized DSO

    Hi,
    When i do a dataload for Write Optimized DSO, I am getting an Error as "Duplicate Data Record Detected".  I have Sales Document Number, Fiscal Year Variant & Billing Item as Semantic Key in the DSO. 
    For this DSO, I am getting data from a Test ECC system, in which most of the Sales Document Number column is Blank for this Datasource.
    When i go into the Error Stack of the DSO, all the rows whichever has Sales Document number as Blank are displayed.  For all this rows, the Item Number is 10.
    Am i getting this Duplicate error as the Sales Document Number is Blank & Item number is 10 for all of them?  I read in Threads that Write Optimized DSO doesnt care about the Key Values, it loads the data even if the Key values are same.
    Any help is highly appreciated.
    Regards,
    Murali

    Hi Murali,
    Is the Item Number a key field ?
    When all the key fields are same then data gets aggreagted depending on the setting done in the transformation for the key figures. These 2 options for key figures are :
    1. Add up the key figures
    2. Replace the key figure
    Since the Sales Document No is blank and Item Number is same then their is a possibility that the key figures for these records might get added up or replaced and thus due to this property of SDSO it might not be throwing error.
    Check the KF value in the SDSO for that Sales Doc No and Item No. and try to find out what is the value for KF. It may have addition of all the common data fields or the KF value of last common record.
    Regards
    Raj Rai

  • Error while creating subsite from site template

    Hi,
    I am getting below error while creating subsite from existing site template .
    Sachin Bhosale

    There must be a duplicate Email field created in any list/library. The cause can be identified by renaming the site template to sitename.cab > extact the cab file > open the manifest file search for email and see where it is associated. Refer
    to the following blog post for more information
    http://sharepointserved.blogspot.com/2012/11/a-duplicate-name-was-found.html
    http://sharepoint.stackexchange.com/questions/11944/error-when-creating-a-site-from-custom-template-a-duplicate-field-name-name
    Cheers,

  • Error while Assigning database level role (db_datareader) to SQL login (Domain Account)

    Team,
    I got an error while creating a User for Domain Account. Below is the screen shot of the error (error : 15401)
    Database instance is on SQL 2000 SP3. ( I know it is out of support, But the customer is relutanct to upgrade)
    On Google search, i found below article which is best matching for this error
    http://support.microsoft.com/kb/324321
    I have follows each step of troubleshooting. But still the issue persists.
    Step 1. The login does not exist == The login is very much exist in the domain as i am able to add the same domain id to other database instances
    Step 2. Duplicate security identifiers == i have used this query to find duplicate SID
    /*  SELECT name FROM syslogins WHERE sid = SUSER_SID ('YourDomain\YourLogin') */
    But there was only one row returned with create date of today's.
    Error while Assigning database level role (db_datareader) to SQL login (Domain Account) 
    Step 3. Authentication failure == Domain is available. User is able to login on other servers via RDP connection.
    Step 4. Case sensitivity == Database collation is set to Case insensitivity. (CI)
    Other two 5. Local Accounts & 6. Name resolution == is not applicable to me.
    I tried other ways also.
    A. Creating login and providing permission in one go only = User account is not created
    B. Instead of GUI, use query to create login and provide required permission = Same error.
    Does anybody has faced any such situation
    Chetan

    See the below output
    srvid
    sid
    xstatus
    xdate1
    xdate2
    name
    password
    dbid
    language
    isrpcinmap
    ishqoutmap
    selfoutmap
    NULL
    0x010500000000000515000000A1F66E1BFC1DC75D26E72530A2B80400
    14
    20:25.9
    57:33.4
    UKBAA\LHRAPPMuttavarapuS
    NULL
    1
    us_english
    0
    0
    0
    Chetan

  • Error while updating JDBD table

    Hi all,
    Am getting the error at the receiver JDBC CC. I have checked the conceren mapping also . i t is working under test tab.
    Error while parsing or executing XML-SQL document: Error processing request in sax parser: Error when executing statement for table/stored proc. 'SAP_STG_AP_SAP_REF' (structure 'Statement'): com.sybase.jdbc3.jdbc.SybSQLException: Attempt to insert duplicate key row in object 'SAP_STG_AP_SAP_REF' with unique index 'SAP_STG_AP_SAP_REF_IX1'
    Any sugestion?
    Thanks,
    kanan

    ya issue is while updating the jdbc table ..duplicate entries are coming...I have check the maping xml also with the same data..I think I need to change the mapping -to remove the duplicate (entry in that field) using some function. Any idea which will be the function?? + please let me know how to find out which field is the error refering to in the jdbc table-- with unique index 'SAP_STG_AP_SAP_REF_IX1'
    In my scenario Action is INSERT. At the mapping output, there are some entries (5-6 ACCESS) where all the fields under the ACCESS are similar
    kanan

  • Error While uploading a EXCEL file in Web dynpro - HR_KR_XSTRING_TO_STRING

    Hi,
       I am getting an error while trying to upload a excel file.  I am using the function HR_KR_XSTRING_TO_STRING for conversion. The error message is  "Unable to interpret    as a number"

    First of all, are you sure you know what you are working with here.  If this is standard Excel file in the Microsoft binary/propriatery format there is not function module or class in ABAP that can magically just transform this to a character string.  You should search the forums as this has been discussed extensively.  On that topic, please also do not post duplicate threads.  I have already locked your other thread with the same basic question.
    Instead of the binary/propriatery format of Excel, the file should be saved on the client as a text based format - like XML or Text Tab Delimited. You can then use several different options on the server to convert the XSTRING to STRING and process the content (becuase it was text based to begin with).  You could use CL_BCS_CONVERT, the function modules in the function group SCMS_CONV, or the class CL_ABAP_CONV_IN_CE.

  • Error While uplaoding a EXCEL file in Web dynpro - HR_KR_XSTRING_TO_STRING

    Hi,
        I am getting an error while uploading an excel file in web Dynpro application. i am using the HR_KR_XSTRING_TO_STRING this function. I am getting the following error message 'Unable to interpret    as a number'.

    First of all, are you sure you know what you are working with here.  If this is standard Excel file in the Microsoft binary/propriatery format there is not function module or class in ABAP that can magically just transform this to a character string.  You should search the forums as this has been discussed extensively.  On that topic, please also do not post duplicate threads.  I have already locked your other thread with the same basic question.
    Instead of the binary/propriatery format of Excel, the file should be saved on the client as a text based format - like XML or Text Tab Delimited. You can then use several different options on the server to convert the XSTRING to STRING and process the content (becuase it was text based to begin with).  You could use CL_BCS_CONVERT, the function modules in the function group SCMS_CONV, or the class CL_ABAP_CONV_IN_CE.

  • Oracle.jbo.RowCreateException: JBO-25017: Error while creating a new ROW

    I am trying same multi step PO example. I have created a search page and there are 3 other pages for PO Header, PO Line and Review/Submit Page. I am coming on 2nd page(creating Line Item) and when I click on create new item record I am getting this error. Any help will be aprrecaited.
    oracle.jbo.RowCreateException: JBO-25017: Error while creating a new entity row for POLinesEO.
    This is my code for POLineShipFullVORowImpl.java
    protected void create(oracle.jbo.AttributeList nvp)
    POLinesEOImpl lineEO = (POLinesEOImpl)getEntity(0);
    POShipmentEOImpl shipmentEO = (POShipmentEOImpl)getEntity(1);
    try
    // Create Lines EO
    lineEO.create(nvp);
    // Create Shipments EO
    shipmentEO.create(lineEO);
    // Calling this ensures that any personalization default values are
    // properly set since the OAF normally sets this in the super.create(), but
    // since this is not called in this workaround, we need another method
    // to ensure customer defaults are applied.
    // The following method was introduced in OAF internal release 11.5.10J. Since
    // the production release of the ToolBox must be able to run on 11.5.10I, this
    // cannot be enabled.
    // setDefaultValue();
    catch (Exception ex)
    lineEO.revert();
    shipmentEO.revert();
    if (ex instanceof oracle.jbo.JboException)
    oracle.jbo.JboException jboEx = (oracle.jbo.JboException)ex;
    // Developers have to do the mapping on their own becauce of the override.
    jboEx.doEntityToVOMapping(getApplicationModule(), new oracle.jbo.ViewObject[]{getViewObject()});
    throw jboEx;
    throw OAException.wrapperException(ex);
    } // end create()
    Code for PoLinesEOImpl.java
    * Initializes a new purchase order line.
    public void create(AttributeList attributeList)
         // NOTE: header id is automatically set by BC4J because of the
    // composition association.
    super.create(attributeList);
    OADBTransaction transaction = (OADBTransaction)getOADBTransaction();
    // DEFAULT: line id
    Number lineId = transaction.getSequenceValue("FWK_TBX_PO_LINES_S");
    setLineId(lineId);
    // DEFAULT: Line number
    POHeaderEOImpl headerEO = getPOHeaderEO();
    Number newLineNum = headerEO.getNextLineNum();
    setLineNumber(newLineNum);
    } // end create()
    * Sets <code>value</code> as the attribute value for ShipmentNumber
    * Business Rules
    * Required; cannot be null
    * Cannot be updated on a committed line
    * Must be unique for this purchase order
    * Must be >= 1
    public void setLineNumber(Number value)
    if (value != null)
    // Verify value is > 0
    if (value.compareTo(0) <= 0)
    throw new OAAttrValException(OAException.TYP_ENTITY_OBJECT,
    getEntityDef().getFullName(), // EO name
    getPrimaryKey(), // EO PK
    "LineNumber", // Attribute Name
    value, // Attribute value
    "AK", // Message product short name
    "DEBUG -- add message"); // Message name
    // To verify uniqueness, start by checking the entity cache.
    com.sun.java.util.collections.Iterator lineIterator =
    getEntityDef().getAllEntityInstancesIterator(getDBTransaction());
    Number lineId = getLineId();
    Number headerId = getHeaderId();
    while ( lineIterator.hasNext() )
    POLinesEOImpl cachedLine =
    (POLinesEOImpl)lineIterator.next();
    Number cachedLineNum = cachedLine.getLineNumber();
    Number cachedLineId = cachedLine.getLineId();
    Number cachedHeaderId = cachedLine.getHeaderId();
    if ((cachedLineNum != null) &&
    (cachedLineNum.compareTo(value) == 0) &&
    (cachedLineId.compareTo(lineId) != 0) && // Exclude this line
    (cachedHeaderId.compareTo(headerId) == 0))
    throw new OAAttrValException(OAException.TYP_ENTITY_OBJECT,
    getEntityDef().getFullName(), // EO name
    getPrimaryKey(), // EO PK
    "LineNumber", // Attribute Name
    value, // Attribute value
    "AK", // Message product short name
    "DEBUG -- add message"); // Message name
    // Didn't find a duplicate in the entity cache so now we check the database.
    // Note: don't bother with this if the header is in a NEW state since that
    // means we won't have any lines in the database yet.
    POHeaderEOImpl headerEO = getPOHeaderEO();
    if (headerEO.getEntityState() != STATUS_NEW)
    PurchaseEntityExpert poExpert =
    POHeaderEOImpl.getPurchaseEntityExpert(getOADBTransaction());
    PoLineNumVVOImpl valLineNumVO =
    (PoLineNumVVOImpl)poExpert.findValidationViewObject("PoLineNumVVO1");
    valLineNumVO.initQuery(headerId, value);
    // We're doing an existence check; shouldn't have any rows.
    if (valLineNumVO.hasNext())
    throw new OAAttrValException(OAException.TYP_ENTITY_OBJECT,
    getEntityDef().getFullName(), // EO name
    getPrimaryKey(), // EO PK
    "LineNumber", // Attribute Name
    value, // Attribute value
    "AK", // Message product short name
    "DEBUG -- add message"); // Message name
    // If this is the largest line number for this order, this will store it for
    // reference when creating subsequent lines.
    headerEO.resetLineNum(value);
    setAttributeInternal(LINENUMBER, value);
    } // end setLineNumber()
    Edited by: user9941374 on Mar 15, 2012 3:16 PM

    Hi Frank,
    As per the steps mentioned in the following link :
    http://www-apps.us.oracle.com:1100/fwk/jdev/doc/devguide/bus/bus_java.htm#tl
    I have created the required entity objects and view objects.
    I have an entity JobsDEO which is based on a view per_jobs_vl which is itself based on 2 tables,per_jobs_f and per_jobs_tl,wherein _tl is the translation table.
    The entity for _tl table is JobTranslationEO and has no VO associated with it.Its the JobsVO,based on JobsDEO,that has to handle any interactions with this entity too.
    JOBSDEO has a property set up for HCM_DBSEQUENCE,which makes it read the value of job_id from the sequence per_jobs_s.
    Now,when I try to insert into the JobsVO,based on JobsDEO,it gives me the above mentioned error.
    One more thing is that the error does'nt occur when we commit a row,its just when we click the "+" button in the AM Tester that we get this error.
    Please advice.

  • JBO-25017: Error while creating a new entity row.

    [[email protected]]
    I'm trying to simply duplicate some records using essentially the code below:
      public static void copyUserAttributeValues2(final ApplicationModule p_appModule, final Long p_lDestinationId,
                                                 final String p_strDestinationType, final Long p_lSourceId) {
        final ViewObject l_viewObject = p_appModule.findViewObject("UserAttributeValuesCopyVO1");
        l_viewObject.setWhereClause(null);
        l_viewObject.setNamedWhereClauseParam("bindTargetId", new Number(p_lSourceId));
        l_viewObject.executeQuery();
        while (l_viewObject.hasNext()) {
          final Row l_newDuplicateRow = l_viewObject.createAndInitRow(l_viewObject.next());  // <- Error here.
          l_newDuplicateRow.setAttribute(VOConstants.VO_ACCESS_SOURCE_ID, new Number(p_lDestinationId));
          l_newDuplicateRow.setAttribute(VOConstants.VO_USER_ATTRIBUTE_ASSIGN_VALUE_TARGET_TYPE, p_strDestinationType);
          l_viewObject.insertRow(l_newDuplicateRow);
          l_viewObject.next(); // need to skip otherwise we'll get into an infinite loop.
      }When I run this I get the following:
    WARNING: ADF: Adding the following JSF error message: Error while creating a new entity row for UserAttributeValueEO.
    oracle.jbo.RowCreateException: JBO-25017: Error while creating a new entity row for UserAttributeValueEO.
         at oracle.jbo.server.ViewRowStorage.processRowCreateExceptions(ViewRowStorage.java:3287)
         at oracle.jbo.server.ViewRowStorage.create(ViewRowStorage.java:1134)
         at oracle.jbo.server.ViewRowImpl.create(ViewRowImpl.java:413)
         at oracle.jbo.server.ViewRowImpl.callCreate(ViewRowImpl.java:430)
         at oracle.jbo.server.ViewObjectImpl.createInstance(ViewObjectImpl.java:4722)
         at oracle.jbo.server.QueryCollection.createRowWithEntities(QueryCollection.java:1764)
         at oracle.jbo.server.ViewRowSetImpl.createRowWithEntities(ViewRowSetImpl.java:2210)
         at oracle.jbo.server.ViewRowSetImpl.doCreateAndInitRow(ViewRowSetImpl.java:2256)
         at oracle.jbo.server.ViewRowSetImpl.createAndInitRow(ViewRowSetImpl.java:2216)
         at oracle.jbo.server.ViewObjectImpl.createAndInitRow(ViewObjectImpl.java:9410)
         at oracle.apps.epm.fcc.model.applicationModule.TemplateManager.copyUserAttributeValues(TemplateManager.java:298)
         at oracle.apps.epm.fcc.model.applicationModule.CalendarAMImpl.initDayLabels(CalendarAMImpl.java:2381)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at oracle.adf.model.binding.DCInvokeMethod.invokeMethod(DCInvokeMethod.java:561)
         at oracle.adf.model.binding.DCDataControl.invokeMethod(DCDataControl.java:2112)
         at oracle.adf.model.bc4j.DCJboDataControl.invokeMethod(DCJboDataControl.java:3015)
         at oracle.adf.model.binding.DCInvokeMethod.callMethod(DCInvokeMethod.java:256)
         at oracle.jbo.uicli.binding.JUCtrlActionBinding.doIt(JUCtrlActionBinding.java:1437)
         at oracle.adf.model.binding.DCDataControl.invokeOperation(DCDataControl.java:2119)
         at oracle.jbo.uicli.binding.JUCtrlActionBinding.invoke(JUCtrlActionBinding.java:693)
         at oracle.adf.controller.v2.lifecycle.PageLifecycleImpl.executeEvent(PageLifecycleImpl.java:392)
         at oracle.adfinternal.view.faces.model.binding.FacesCtrlActionBinding._execute(FacesCtrlActionBinding.java:216)
         at oracle.adfinternal.view.faces.model.binding.FacesCtrlActionBinding.execute(FacesCtrlActionBinding.java:200)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at com.sun.el.parser.AstValue.invoke(AstValue.java:157)
         at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283)
         at oracle.adf.controller.internal.util.ELInterfaceImpl.invokeMethod(ELInterfaceImpl.java:136)
         at oracle.adfinternal.controller.activity.MethodCallActivityLogic.execute(MethodCallActivityLogic.java:140)
         at oracle.adfinternal.controller.engine.ControlFlowEngine.doRouting(ControlFlowEngine.java:874)
         at oracle.adfinternal.controller.engine.ControlFlowEngine.doRouting(ControlFlowEngine.java:750)
         at oracle.adfinternal.controller.engine.ControlFlowEngine.invokeTaskFlow(ControlFlowEngine.java:218)
         at oracle.adfinternal.controller.state.ChildViewPortContextImpl.invokeTaskFlow(ChildViewPortContextImpl.java:96)
         at oracle.adfinternal.controller.state.ControllerState.createChildViewPort(ControllerState.java:1281)
         at oracle.adfinternal.controller.ControllerContextImpl.createChildViewPort(ControllerContextImpl.java:95)
         at oracle.adf.controller.internal.binding.DCTaskFlowBinding.createRegionViewPortContext(DCTaskFlowBinding.java:324)
         at oracle.adf.controller.internal.binding.DCTaskFlowBinding.getViewPort(DCTaskFlowBinding.java:279)
         at oracle.adf.controller.internal.binding.TaskFlowRegionModel.doProcessBeginRegion(TaskFlowRegionModel.java:127)
         at oracle.adf.controller.internal.binding.TaskFlowRegionModel.processBeginRegion(TaskFlowRegionModel.java:88)
         at oracle.adf.controller.internal.binding.TaskFlowRegionController.refreshRegion(TaskFlowRegionController.java:114)
         at oracle.adf.model.binding.DCBindingContainer.internalRefreshControl(DCBindingContainer.java:3015)
         at oracle.adf.model.binding.DCBindingContainer.refresh(DCBindingContainer.java:2736)
         at oracle.adf.controller.internal.binding.TaskFlowRegionController.refreshRegion(TaskFlowRegionController.java:143)
         at oracle.adf.model.binding.DCBindingContainer.internalRefreshControl(DCBindingContainer.java:3015)
         at oracle.adf.model.binding.DCBindingContainer.refresh(DCBindingContainer.java:2736)
         at oracle.adf.controller.internal.binding.TaskFlowRegionController.refreshRegion(TaskFlowRegionController.java:143)
         at oracle.adf.model.binding.DCBindingContainer.internalRefreshControl(DCBindingContainer.java:3015)
         at oracle.adf.model.binding.DCBindingContainer.refresh(DCBindingContainer.java:2736)
         at oracle.adf.controller.v2.lifecycle.PageLifecycleImpl.prepareRender(PageLifecycleImpl.java:546)
         at oracle.adf.controller.v2.lifecycle.Lifecycle$9.execute(Lifecycle.java:222)
         at oracle.adfinternal.controller.lifecycle.LifecycleImpl.executePhase(LifecycleImpl.java:190)
         at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.mav$executePhase(ADFPhaseListener.java:19)
         at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$5.before(ADFPhaseListener.java:393)
         at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.beforePhase(ADFPhaseListener.java:58)
         at oracle.adfinternal.controller.faces.lifecycle.ADFLifecyclePhaseListener.beforePhase(ADFLifecyclePhaseListener.java:42)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:246)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:193)
         at javax.faces.webapp.FacesServlet.service(FacesServlet.java:266)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:189)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:85)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
         at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:54)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
         at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.security.wls.filter.SSOSessionSynchronizationFilter.doFilter(SSOSessionSynchronizationFilter.java:120)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:202)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3588)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2200)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2106)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1428)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused by: java.lang.NullPointerException
         at java.lang.Class.isAssignableFrom(Native Method)
         at oracle.jbo.rules.RulesBeanUtils.createException(RulesBeanUtils.java:404)
         at oracle.jbo.rules.RulesBeanUtils.createException(RulesBeanUtils.java:360)
         at oracle.jbo.rules.AbstractValidator.createException(AbstractValidator.java:818)
         at oracle.jbo.rules.AbstractValidator.raiseException(AbstractValidator.java:850)
         at oracle.jbo.rules.JboAbstractValidator.raiseException(JboAbstractValidator.java:393)
         at oracle.jbo.rules.AbstractValidator.raiseException(AbstractValidator.java:837)
         at oracle.jbo.rules.JboAbstractValidator.callValidateValueWithContext(JboAbstractValidator.java:258)
         at oracle.jbo.rules.JboAbstractValidator.validate(JboAbstractValidator.java:372)
         at oracle.jbo.rules.RulesBeanUtils.validateObject(RulesBeanUtils.java:878)
         at oracle.jbo.rules.RulesBeanUtils.validate(RulesBeanUtils.java:849)
         at oracle.jbo.server.AttributeDefImpl.validate(AttributeDefImpl.java:2842)
         at oracle.jbo.server.EntityImpl.validateAttribute(EntityImpl.java:12111)
         at oracle.jbo.server.ViewRowStorage.create(ViewRowStorage.java:1098)
         ... 90 more
    ## Detail 0 ##
    java.lang.NullPointerException
         at java.lang.Class.isAssignableFrom(Native Method)
         at oracle.jbo.rules.RulesBeanUtils.createException(RulesBeanUtils.java:404)
         at oracle.jbo.rules.RulesBeanUtils.createException(RulesBeanUtils.java:360)
         at oracle.jbo.rules.AbstractValidator.createException(AbstractValidator.java:818)
         at oracle.jbo.rules.AbstractValidator.raiseException(AbstractValidator.java:850)
         at oracle.jbo.rules.JboAbstractValidator.raiseException(JboAbstractValidator.java:393)
         at oracle.jbo.rules.AbstractValidator.raiseException(AbstractValidator.java:837)
         at oracle.jbo.rules.JboAbstractValidator.callValidateValueWithContext(JboAbstractValidator.java:258)
         at oracle.jbo.rules.JboAbstractValidator.validate(JboAbstractValidator.java:372)
         at oracle.jbo.rules.RulesBeanUtils.validateObject(RulesBeanUtils.java:878)
         at oracle.jbo.rules.RulesBeanUtils.validate(RulesBeanUtils.java:849)
         at oracle.jbo.server.AttributeDefImpl.validate(AttributeDefImpl.java:2842)
         at oracle.jbo.server.EntityImpl.validateAttribute(EntityImpl.java:12111)
         at oracle.jbo.server.ViewRowStorage.create(ViewRowStorage.java:1098)
         at oracle.jbo.server.ViewRowImpl.create(ViewRowImpl.java:413)
         at oracle.jbo.server.ViewRowImpl.callCreate(ViewRowImpl.java:430)
         at oracle.jbo.server.ViewObjectImpl.createInstance(ViewObjectImpl.java:4722)
         at oracle.jbo.server.QueryCollection.createRowWithEntities(QueryCollection.java:1764)
         at oracle.jbo.server.ViewRowSetImpl.createRowWithEntities(ViewRowSetImpl.java:2210)
         at oracle.jbo.server.ViewRowSetImpl.doCreateAndInitRow(ViewRowSetImpl.java:2256)
         at oracle.jbo.server.ViewRowSetImpl.createAndInitRow(ViewRowSetImpl.java:2216)
         at oracle.jbo.server.ViewObjectImpl.createAndInitRow(ViewObjectImpl.java:9410)
         at oracle.apps.epm.fcc.model.applicationModule.TemplateManager.copyUserAttributeValues(TemplateManager.java:298)
         at oracle.apps.epm.fcc.model.applicationModule.CalendarAMImpl.initDayLabels(CalendarAMImpl.java:2381)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at oracle.adf.model.binding.DCInvokeMethod.invokeMethod(DCInvokeMethod.java:561)
         at oracle.adf.model.binding.DCDataControl.invokeMethod(DCDataControl.java:2112)
         at oracle.adf.model.bc4j.DCJboDataControl.invokeMethod(DCJboDataControl.java:3015)
         at oracle.adf.model.binding.DCInvokeMethod.callMethod(DCInvokeMethod.java:256)
         at oracle.jbo.uicli.binding.JUCtrlActionBinding.doIt(JUCtrlActionBinding.java:1437)
         at oracle.adf.model.binding.DCDataControl.invokeOperation(DCDataControl.java:2119)
         at oracle.jbo.uicli.binding.JUCtrlActionBinding.invoke(JUCtrlActionBinding.java:693)
         at oracle.adf.controller.v2.lifecycle.PageLifecycleImpl.executeEvent(PageLifecycleImpl.java:392)
         at oracle.adfinternal.view.faces.model.binding.FacesCtrlActionBinding._execute(FacesCtrlActionBinding.java:216)
         at oracle.adfinternal.view.faces.model.binding.FacesCtrlActionBinding.execute(FacesCtrlActionBinding.java:200)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at com.sun.el.parser.AstValue.invoke(AstValue.java:157)
         at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283)
         at oracle.adf.controller.internal.util.ELInterfaceImpl.invokeMethod(ELInterfaceImpl.java:136)
         at oracle.adfinternal.controller.activity.MethodCallActivityLogic.execute(MethodCallActivityLogic.java:140)
         at oracle.adfinternal.controller.engine.ControlFlowEngine.doRouting(ControlFlowEngine.java:874)
         at oracle.adfinternal.controller.engine.ControlFlowEngine.doRouting(ControlFlowEngine.java:750)
         at oracle.adfinternal.controller.engine.ControlFlowEngine.invokeTaskFlow(ControlFlowEngine.java:218)
         at oracle.adfinternal.controller.state.ChildViewPortContextImpl.invokeTaskFlow(ChildViewPortContextImpl.java:96)
         at oracle.adfinternal.controller.state.ControllerState.createChildViewPort(ControllerState.java:1281)
         at oracle.adfinternal.controller.ControllerContextImpl.createChildViewPort(ControllerContextImpl.java:95)
         at oracle.adf.controller.internal.binding.DCTaskFlowBinding.createRegionViewPortContext(DCTaskFlowBinding.java:324)
         at oracle.adf.controller.internal.binding.DCTaskFlowBinding.getViewPort(DCTaskFlowBinding.java:279)
         at oracle.adf.controller.internal.binding.TaskFlowRegionModel.doProcessBeginRegion(TaskFlowRegionModel.java:127)
         at oracle.adf.controller.internal.binding.TaskFlowRegionModel.processBeginRegion(TaskFlowRegionModel.java:88)
         at oracle.adf.controller.internal.binding.TaskFlowRegionController.refreshRegion(TaskFlowRegionController.java:114)
         at oracle.adf.model.binding.DCBindingContainer.internalRefreshControl(DCBindingContainer.java:3015)
         at oracle.adf.model.binding.DCBindingContainer.refresh(DCBindingContainer.java:2736)
         at oracle.adf.controller.internal.binding.TaskFlowRegionController.refreshRegion(TaskFlowRegionController.java:143)
         at oracle.adf.model.binding.DCBindingContainer.internalRefreshControl(DCBindingContainer.java:3015)
         at oracle.adf.model.binding.DCBindingContainer.refresh(DCBindingContainer.java:2736)
         at oracle.adf.controller.internal.binding.TaskFlowRegionController.refreshRegion(TaskFlowRegionController.java:143)
         at oracle.adf.model.binding.DCBindingContainer.internalRefreshControl(DCBindingContainer.java:3015)
         at oracle.adf.model.binding.DCBindingContainer.refresh(DCBindingContainer.java:2736)
         at oracle.adf.controller.v2.lifecycle.PageLifecycleImpl.prepareRender(PageLifecycleImpl.java:546)
         at oracle.adf.controller.v2.lifecycle.Lifecycle$9.execute(Lifecycle.java:222)
         at oracle.adfinternal.controller.lifecycle.LifecycleImpl.executePhase(LifecycleImpl.java:190)
         at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.mav$executePhase(ADFPhaseListener.java:19)
         at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$5.before(ADFPhaseListener.java:393)
         at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.beforePhase(ADFPhaseListener.java:58)
         at oracle.adfinternal.controller.faces.lifecycle.ADFLifecyclePhaseListener.beforePhase(ADFLifecyclePhaseListener.java:42)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:246)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:193)
         at javax.faces.webapp.FacesServlet.service(FacesServlet.java:266)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:189)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:85)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
         at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:54)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
         at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.security.wls.filter.SSOSessionSynchronizationFilter.doFilter(SSOSessionSynchronizationFilter.java:120)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:202)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3588)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2200)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2106)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1428)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)I have CREATED_BY, CREATION_DATE, LAST_UPDATED_BY, LAST_UPDATE_DATE, LAST_UPDATE_LOGIN and OBJECT_VERSION_NUMBER all defined in my UserAttributeValueEO. CREATED_BY and LAST_UPDATE_LOGIN are Nullable.

    Sorry wrong forum.

Maybe you are looking for