Error while exporting data via Tcode CNS43 by using spreadsheet(XXL) option

Hello All,
User tries to download data to spreadsheet via Tcode CNS43 by using spreadsheet(XXL) option. user gets following error.
Selected key figure STUFE not contained in XXL output structure
Message no. M5180
Diagnosis
You tried to export a key figure that is not contained in the definition of the internal table 'xxl_data'. The key figure, therefore, cannot be exported.
System response
The system ignored the key figure column when exporting.
Procedure
The table definition for 'xxl_data' must be corrected by the development department responsible for the application.
Please note that user doesnt want to use 'save to file' option.
Any help?

Refer SAP notes 761839, 522925
Regards

Similar Messages

Error while exporting data

i get the following error while exporting data evn after running catexp.sql
EXP-00056: ORACLE error 31600 encountered
ORA-31600: invalid input value EMIT_SCHEMA for parameter NAME in function SET_TRANSFORM_PARAM
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 105
ORA-06512: at "SYS.DBMS_METADATA_INT", line 3926
ORA-06512: at "SYS.DBMS_METADATA_INT", line 4050
ORA-06512: at "SYS.DBMS_METADATA", line 836
ORA-06512: at line 1
can anyone help me on this

copy past from the notes referred above -
Symptom(s)
~~~~~~~~~~
You are performing a database export against your 9.2 database. The database
export abnormally ends with the following errors:
EXP-00056: ORACLE error 31600 encountered
ORA-31600: invalid input value EMIT_SCHEMA for parameter NAME in function
SET_TRANSFORM_PARAM
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 105
ORA-06512: at "SYS.DBMS_METADATA_INT", line 3926
ORA-06512: at "SYS.DBMS_METADATA_INT", line 4050
ORA-06512: at "SYS.DBMS_METADATA", line 836
ORA-06512: at line 1
EXP-00000: Export terminated unsuccessfully
Change(s)
~~~~~~~~~~
One of the known causes for the error above is that a patchset was recently
applied to the database but one or more of the patchset steps were not
performed.
Cause
~~~~~~~
View the readme notes for the patchset recently installed. You will see a step
that should have been performed that directs you to run the script named
catpatch.sql. Very likely this step was never performed.
Fix
~~~~
As the sysdba user run the catpatch.sql script found in the directory named
$ORACLE_HOME/rdbms/admin. Before you submit this script, view it's contents.
You may see that this script places the database in restricted mode.
rgds

LKKBLF99   runtime error while export data to the local file

Hi experts,
i got this error while i export data to the local file.
Runtime Errors         OBJECTS_NOT_CHARLIKE
Date and Time          10.09.2011 13:32:43
Short text
     The current statement requires a character-type data object.
Error analysis
    At the statment
         "STRLEN( obj )..."
    , only character-type data objects are supported at the argument
    position "obj".
    In this particular case, the operand "obj" has the non-charcter-type type
    "P".
"OBJECTS_NOT_CHARLIKE"
"SAPLKKBL" or "LKKBLF9
"GEN_FIELD_OUT2"
Include               LKKBLF99
Überführung int. in ext. Format via Konvertierungsexit
    if not gs_fc-convexit is initial or                     "INS TECH11
       not gs_fc-inttype ca 'CN'.
elseif not gs_fc-convexit is initial.            "DEL TECH11
      write to gs_out-hlpchar left-justified.
      gs_out-hlplen = strlen( gs_out-hlpchar ).
ansonsten entspricht sich min. Ausgabelänge und Ausprägungslänge
    else.
      if gs_fc-tech_form ne 99.
        gs_out-hlplen = strlen( ).
      endif.
    endif.
endif.
the error says the operand "obj" has the non-charcter-type type " P" .
i do debug on this and find the LS_FIELDCAT-INTTYPE = " P". so i changed it the QUAN type with length 13 decimal places 2. i can't change it in "C" char type or "NUMC" type because i need the output in decimals. the output is for amount and quantity so need this in decimal places up to 2 or 3.
but still find the same, i do debug on it after change it into QUAN type. find the same value for LS_FIELDCAT-INTTYPE = " P".
let me know how can i define this in char type with decimal places or what.
Please give some suggestion, if you need code, i will post the code.
Thanks in advance
Sachin

Hi Sachin,
Check this links.
[Run time error|OBJECTS_NOT_CHARLIKE : ALV export to local file;
[Error|Runtime error : OBJECTS_NOT_CHARLIKE;
Regards,
Madhu.

Error while exporting data from sql server to excel

Hi,
I am trying to export data from sql server to excel.
The query that I used is s follows
INSERT INTO OPENROWSET( 'Microsoft.Jet.OLEDB.4.0', 'Excel 8.0;Database=C:\Folder1\abc.xls','select * from [Sheet1$A1:IV65000]')
select
column1,column2.... from Table1
I get the following error message while doing so..
String or binary data would be truncated.
The statement has been terminated.
One of the column's holds data more than 225 characters.
What is the way to correct this, i want the whole data of the colum in the excel sheet.

I haven't had great luck with the INSERT INTO OPENROWSET method. Can you try one of the many samples from one of these 3 links?
http://www.excel-sql-server.com/excel-sql-server-import-export-using-vba.htm#Excel%20Data%20Export%20to%20SQL%20Server%20Test%20Code
http://www.mssqltips.com/sqlservertip/1540/insert-update-or-delete-data-in-sql-server-from-excel/
https://www.simple-talk.com/sql/database-administration/getting-data-between-excel-and-sql-server-using-odbc--/
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

Error While Posting Data Through Tcode MM41

Hi Experts,
Getting error when entering article data through tcode MM41 :
Following errors occurred while posting data :
E M3 072 : Enter the RP type
I m already entering RP type in both DC and store tab available on article screen.
Thanks.

Hi Friend,
Youhave to enter for third time for your reference site say for example RFST and again third time i have to enter the RP.
Idealy you should first maintain for reference site initially.
eample I am maintaining MM41 for my store (site) so first at DC level and then at store level and then again when I accept to save the article at refercne Store level I have feed in the RP type.
Hope this solves you query.
Regards,
Ashutosh

Error while exporting data from 9i

When we try to export data from 9i db getting below error.
Db version : Oracle 9i Enterprise Edition Release 9.2.0.5.0-64 bit
cmd : exp user/pwd@db file=test_dmp.dmp tables=state
Export utility: Release 11.1.0.6.0
Error:
EXP-00056: ORACLE error 6550 encountered
ORA-06550: line 1, column 41:
PLS-00302: component 'SET_NO_OUTLINES' must be
ORA-06550: line 1, column 15:
PL/SQL: Statement ignored
EXP-00000: Export terminated unsuccessfully

Hi,
You must export with the 9i version of exp, and import in the 11g database (if that's what you want) with 11g imp.
Regards,
Mario Alcaide

Error while exporting data from HCM to VDS

Hi,
When i am trying to export data from the SAP HCM system using the RPLDAP_EXTRACT, the export fails and the log shows that the LDAP_CREATE failed. In the VDS log,
com.sap.idm.vds.oper.main_listener Message:
Exception on add: class java.lang.Integer:null incompatible with class
java.lang.String:null
I verified the database connectivity from VDS to IDS when seems fine since the LDAP_SEARCH is working fine.
Cheers !
Zaheer

It was a bug in SP2, it is fixed in SP2 Patch 4.
Cheers !!
Zaheer

Fatal Error while retrieving data from Visual Fox Pro using OLE-DB UDS

Hello all,
in a customer project we connected a Visual Fox Pro Database via OLE-DB UDS.
Whenever data is retrieved, a fatal error shows up:
Fatal Error: Error occurred while processing data stream, null
Although the data is retrieved correctly!
MII used: 11.5
UDS-Server: xMII OLE DB UDS, version 4.0.1.10
This is the log from the UDS-Server:
[02/29/2008-11:22:40.195] oleDB [P:4404, T:4792, Framework,   ERROR] 0x0      {extra params}: {5}     [LHDSChannelHandler.cpp @ 488, CLHDSChannelHandler::ExecuteIOCP]
[02/29/2008-11:22:40.195] oleDB [P:4404, T:4792, Framework,   ERROR] 0x17009     Exception occured: pid = 5, original = 5, data = <ExecutionContext><param name="MODE" value="QUERY"/><param name="QUERY" value="SELECT artikelnr FROM artikel "/><param name="ENDDATE" value="1204280560164"/><param name="ROWCOUNT" value="100"/><param name="STARTDATE" value="1204276960164"/></ExecutionContext>.     [LHDSChannelHandler.cpp @ 493, CLHDSChannelHandler::ExecuteIOCP]
********** Start of Exception Stack Trace **********
     1)     [02/29/2008-11:22:40.210] oleDB [P:4404, T:4792,       UDS, ] 0x0     HRESULT: 0x80004005 [Unspecified error]     [BaseOleDbMode.h @ 1133, BaseOleDbMode<class COleDbQuery>::ProcessDynamicResults]
     2)     [02/29/2008-11:22:40.210] oleDB [P:4404, T:4792,       UDS, RETHROW] 0x0     Rethrowing exception.     [BaseOleDbMode.h @ 1211, BaseOleDbMode<class COleDbQuery>::ProcessDynamicResults]
     3)     [02/29/2008-11:22:40.210] oleDB [P:4404, T:4792,       UDS, RETHROW] 0x0     Rethrowing exception.     [Query.cpp @ 107, COleDbQuery::ExecuteOleDbMode]
     4)     [02/29/2008-11:22:40.210] oleDB [P:4404, T:4792,       UDS, RETHROW] 0x0     Rethrowing exception.     [BaseOleDbMode.h @ 381, BaseOleDbMode<class COleDbQuery>::ExecuteMode]
     5)     [02/29/2008-11:22:40.210] oleDB [P:4404, T:4792,       UDS, RETHROW] 0x0     Rethrowing exception over COM.     [LHDSUtil.h @ 1086, lhds::LHDSModeImpl<class COleDbQuery,struct ILHDSMode>::Execute]
     6)     [02/29/2008-11:22:40.210] oleDB [P:4404, T:4792,       UDS, RETHROW] 0x0     Rethrowing exception.     [LHDSUtil.h @ 1124, lhds::LHDSModeImpl<class COleDbQuery,struct ILHDSMode>::Execute]
     7)     [02/29/2008-11:22:40.210] oleDB [P:4404, T:4792, Framework, RETHROW] 0x0     Rethrowing exception over COM.     [LHDSDispatcher.cpp @ 135, CLHDSDispatcher::CallMode]
     8)     [02/29/2008-11:22:40.210] oleDB [P:4404, T:4792,       UDS, RETHROW] 0x0     Rethrowing exception over COM.     [LHDSUtil.h @ 893, lhds::LHDataServerImpl<class CLHOleDbDataServer>::Execute]
     9)     [02/29/2008-11:22:40.210] oleDB [P:4404, T:4792, Framework, ] 0x0     Caught exception over a COM boundry.     [LHDSChannelHandler.cpp @ 566, CLHDSChannelHandler::OnExecute]
     10)     [02/29/2008-11:22:40.210] oleDB [P:4404, T:4792, Framework, RETHROW] 0x0     Rethrowing exception.     [LHDSChannelHandler.cpp @ 574, CLHDSChannelHandler::OnExecute]
     11)     [02/29/2008-11:22:40.210] oleDB [P:4404, T:4792, Framework, RETHROW] 0x0     Rethrowing exception.     [LHDSChannelHandler.cpp @ 502, CLHDSChannelHandler::ExecuteIOCP]
     12)     [02/29/2008-11:22:40.210] oleDB [P:4404, T:4792, Framework, RETHROW] 0x0     Rethrowing exception over COM.     [LHDSChannelHandler.cpp @ 189, CLHDSChannelHandler::Execute]
     13)     [02/29/2008-11:22:40.210] oleDB [P:4404, T:4792,      Host, HANDLED] 0x0     Handled exception.     [ThreadPool.cpp @ 228, ThreadPool::ThreadProc]
************** End of Exception Trace **************
Any help is very much appreciated.
Regards,
Matthias
Edited by: Matthias Wald on Feb 29, 2008 12:12 PM

Hi Salvatore,
tried your suggestian but no luck, same error.
I checked the Version. It shows 4.0.1.10.
Is there a later version available?
UDS Settings are (apologize any misspellings):
Collect Requests                              false
Log Level                                         Info
Maximum Concurrent Connections    1000
Pool Size                                         5
Port                                                 8087
Runtime Mode                                  Service
Service Dependencies                       Eventlog
Service Passowrd                              *******
Service Startup                                 Manual
Service User                                     .\LocalSystem
Shutdown Timeout                            10
Stack Size                                       0
Threading Model                               MTA
Trusted Requesters
Use IOCP                                        true
Connection String                            Provider=VFPOLEDB.1;Data Source=D:\Daten;Mode=Share Deny None;Extended Properties="";User ID="";Password="";Mask Password=False;Cache Authentication=False;Encrypt Password=False;Collating Sequence=MACHINE;DSN="";DELETED=True;CODEPAGE=1252;MVCOUNT=16384;ENGINEBEHAVIOR=90;TABLEVALIDATE=3;REFRESH=5;VARCHARMAPPING=False;ANSI=True;REPROCESS=5
Persistent Connectikon                     true
Show Affected Rows                         Minimal
Variant Representation                      String
I have changed MTA to STA and also tried other admin user for service without luck.
Any other hints?

Error while loading data from PSA to DSO using DTP

Hi,
I have a Unique aplha numeric identifier of type "Char" length "32" . When I am loading the data from PSA to DSO using DTP I get the following error message:
"An error occurred while executing a transformation rule:
The exact error message is
Overflow converting from ' '
The error was triggered at the following point in the program:
GP4JJHUI6HD7NYAK6MVCDY4A01V 425
System response
Processing the data record has been terminated"
Any idea how I can resolve this....
Thanks

Hi,
fist check weather any special characteristics if not
check in data source under this we have fields tab check the format of a particular field format internal/external/check u choose internal format, if any check routine once
use Semantic Groups in the DTP.
Try it
Thanku
lokeeshM
Edited by: lmedaSAP_BI on Oct 20, 2010 6:44 AM

Error while retrieving data from PL/SQL Table using SELECT st. (Urgent!!!)

Hi Friends,
I am using Oracle 8.1.6 Server, & facing problems while retrieving data from a PL/SQL Table:
CREATE or REPLACE PROCEDURE test_proc IS
TYPE tP2 is TABLE of varchar2(10); --declared a collection
dt2 tP2 := tP2('a','b','c');
i NUMBER(8);
begin
SELECT COUNT(*) INTO i FROM TABLE(CAST(dt2 as tP2));
DBMS_OUTPUT.PUT_LINE('**'||i);
end;
While executing the above procedure, I encountered foll. error:
ERROR at line 1:
ORA-00600: internal error code, arguments: [15419], [severe error during PL/SQL execution], [], [],
ORA-06544: PL/SQL: internal error, arguments: [pfrrun.c:pfrbnd1()], [], [], [], [], [], [], []
ORA-06553: PLS-801: internal error [0]
Can anyone please help me, where the problem is??
Is it Possible to retrieve data from PL/SQL TABLE using SELECT statement? & How ?
Thanks in advance.
Best Regards,
Jay Raval.

Thanks Roger for the Update.
It means that have to first CREATE TYPE .. TABLE in database then only I can fire a Select statement on that TYPE.
Actually I wanted to fire a Select statement on the TABLE TYPE, defined & declared in PLSQL stored procedure using DECLARE TYPE .. TABLE & not using CREATE TYPE .. TABLE.
I was eager to know this, because my organization is reluctant in using CREATE TYPE .. TABLE defined in the database, so I was looking out for another alternative to access PL/SQL TABLE using Select statement without defining it database. It would have been good if I could access a PLSQL TABLE using Select statement Declared locally in the stored procedure.
Can I summarize that to access a PL/SQL TABLE using SELECT statement, I have to first CREATE TYPE .. TABLE?
If someone have any other idea on this, please do let me know.
Thanks a lot for all help.
Best Regards,
Jay Raval.
You have to define a database type...
create type tP2 is table of varchar2(10)
CREATE OR REPLACE PROCEDURE TEST_PROC
IS
dt2 tP2 := tP2('a','b','c');
i NUMBER(8);
begin
SELECT COUNT(*) INTO i FROM TABLE(CAST (dt2 AS tP2));
DBMS_OUTPUT.PUT_LINE('**'||i);
end;
This will work.
Roger

Error while sync data from wcs to eclipse using CSDT

Hi,
I installaed webcenter 11gR1 in remote location and i installed eclipse indigo in localhost.
and i connect to the server using CSDT plug-in in eclipse success fully.
the following error i'm getting while pressing the sync button.
Error while getting the asset types form webCenter Sites.Please make sure connection information is correct and you belongs to RestAdmin group.
and when i click on create template button im getting the fallowing error.
Error occured while getting the site informatino from Webcenter sites: A message body reader for java, class com.fatwire.rest.beans.userBean , and MIME media tlye,text/html; charset=UTF-8, was not found.
could you please resolve this issue.
Thanks And Regards
Rajendar

david.pai wrote:
I found the reason. The eclipse plugin - com.fatwire.eclipsecsdt_1.2.jar bundled with current WCSites zip (11gR1BP1) on OTN Download page is 12470 KB. It works only on linux but not on windows. For windows there is another jar (5030 KB) that works fine but it's not exists on OTN Download page, which contains only the GENERIC package.The first one is indeed for version 11gR1BP1(11.1.1.6.1), the second one you mentioned is the one for 11gR1 (11.1.1.6.0). Both should work on windows as well, its just important that you use the right version. Recommended Eclipse is the Helios release.
Note: Only Sites 11gR1BP1(11.1.1.6.1) supports remote connection with CSDT.
Cheers,
Rodney
Edited by: Rodney on Apr 19, 2013 8:35 AM

Error while extracting data via UD Connect

Hi,
Trying for the first time to connect Oracle data base/JDBC connection type via UD connect(we are in BI 7.0).While creating the data source and assigning UD Connect source object in the extraction tab,following error is obtained" UDCADAPTERROR::RSSDK100 ,cannot open connection"
Appreciate if anybody can advice me on this..checked the RFC connection in BW and its working ok.
regards
savi

Hi Michael, we have JDBC connection tested in TestJDBCPage.jsp and working good, only have problems in Schema for access to tables, but in SQL test using Schema the result is ok.
How we can get Logs for detect the problem in msg : <b>UDCADPTERERROR::RSSDK|200|TABLE:</b>
We apreciate you collaboration, thank you.

EXP-00056: ORACLE error 936 encountered error while exporting data

Hi,
When i execute following query i get "EXP-00056: ORACLE error 936 encountered".
Anything m i missing in the query or do i need to specifiy any other parameter.
c:\exp HKKR/HKKR@oracle10 tables=T_Transaction_image query=\"where transaction_id in select transaction_id from t_transaction where transaction_datetime between to_date$\'01-april-2012 09:00:00\',\'dd-mm-yyyy hh24:mi:ss\'$ AND to_date$\'01-april-2012 09:30:00\',\'dd-mm-yyyy hh24:mi:ss\'$\" file='/u01/app/oracle/HKKR_TRANSImage_DATE061212.DMP' LOG='/u01/app/oracle/HKKR_TRANSimage_DATE061212.log' rows=y buffer=100000
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
Export done in US7ASCII character set and AL16UTF16 NCHAR character set
server uses WE8ISO8859P1 character set (possible charset conversion)
About to export specified tables via Conventional Path ...
*. . exporting table T_TRANSACTION_IMAGE*
*. . exporting partition NOV11*
EXP-00056: ORACLE error 936 encountered
ORA-00936: missing expression
Export terminated successfully with warnings.
Regards,
Yogesh

missing parenthesis for the sub-query
... where transaction_id in ( select ... )

Error while exporting data from ABAP to Excel

Hello All,
iam trying to download data from ABAP scrn to Excel using I_OI_SPREADSHEET METHODS. I get an error in method 'SET_RANGES_DATA' - 'Memory protection fault occurred in document interface'.
I have pasted my code below. Kindly help me to solve this issue.
Create container ??
CALL METHOD c_oi_container_control_creator=>get_container_control
    IMPORTING
      control = g_control
      error   = g_error.
Initialize
CALL METHOD g_control->init_control
    EXPORTING
      r3_application_name      = 'Basis'
      parent                   = g_container
     register_on_close_event = c_reg_on_close_event
     register_on_custom_event = c_reg_on_custom_event
     no_flush                 = c_no_flush
    IMPORTING
      error                    = g_error.
Set Doc type
g_document_type = 'Excel.Sheet'.
Create Proxy
CALL METHOD g_control->get_document_proxy
    EXPORTING
      document_type = g_document_type
    IMPORTING
      document_proxy = g_document
      error          = g_error.
CALL METHOD g_document->create_document
    EXPORTING
      document_title = 'Excel'.                             "#EC NOTEXT
CALL METHOD g_document->get_spreadsheet_interface
    IMPORTING
      sheet_interface = g_handle.
CHECK g_document IS NOT INITIAL.
read selected line data from gtab
READ TABLE g_tab_data INDEX 1 INTO l_wa_pos_trans.
Get Field Descriptions
CALL FUNCTION 'DDIF_FIELDINFO_GET'
    EXPORTING
      tabname        = 'TRIGS_EXPORT_EXCEL'
      langu          = sy-langu
    TABLES
      dfies_tab      = lt_dfies
    EXCEPTIONS
      not_found      = 1
      internal_error = 2
      OTHERS         = 3.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Header for User Data
l_h_cnt = 1.
LOOP AT lt_dfies INTO lwa_dfies.
    IF lwa_dfies-fieldname EQ 'USER_ID'          OR
       lwa_dfies-fieldname EQ 'EXCEL_DATE'       OR
       lwa_dfies-fieldname EQ 'EXCEL_TIME'       OR
       lwa_dfies-fieldname EQ 'SECURITY_ACCOUNT' OR
       lwa_dfies-fieldname EQ 'SECURITY_ID'      OR
       lwa_dfies-fieldname EQ 'COMPANY_CODE'.
      PERFORM fill_cell USING l_h_cnt 1 1 lwa_dfies-scrtext_m.
      l_h_cnt = l_h_cnt + 1.
    ENDIF.
ENDLOOP.
Fill Header Values
PERFORM fill_cell USING 1 2 1 sy-uname.
PERFORM fill_cell USING 2 2 1 sy-datum.
PERFORM fill_cell USING 3 2 1 sy-uzeit.
PERFORM fill_cell USING 4 2 1 l_wa_pos_trans-company_code .
PERFORM fill_cell USING 5 2 1 l_wa_pos_trans-security_account.
PERFORM fill_cell USING 6 2 1 l_wa_pos_trans-security_id.
Texts
l_h_cnt = l_h_cnt + 1.
PERFORM fill_cell USING l_h_cnt 1 1 text-011.
PERFORM fill_cell USING l_h_cnt 3 1 text-012.
Range for header
range_item-name = 'RANGE1'.
range_item-rows = '7'.
range_item-columns = '3'.
range_item-code = g_handle->spreadsheet_insertall.
APPEND range_item TO range_list.
CALL METHOD g_handle->set_selection
    EXPORTING
      left    = 1
      top     = 1
      rows    = 7
      columns = 3
    IMPORTING
      retcode = retcode.
CALL METHOD g_handle->insert_range
    EXPORTING
      columns = 3
      rows    = 7
      name    = 'RANGE1'
    IMPORTING
      retcode = retcode.
CALL METHOD g_handle->set_ranges_data
    EXPORTING
      ranges   = range_list
      contents = gt_cell_data
    IMPORTING
      retcode = retcode.
Columns for PC
CLEAR: gt_cell_data[].
l_pc_cnt = l_h_cnt + 1.
LOOP AT lt_dfies INTO lwa_dfies.
    IF lwa_dfies-fieldname EQ 'SBWHR' OR
       lwa_dfies-fieldname CP '_PC'.
      PERFORM fill_cell USING l_pc_cnt 1 0 lwa_dfies-scrtext_m.
      l_pc_cnt = l_pc_cnt + 1.
    ENDIF.
ENDLOOP.
Pos Curr - Values
PERFORM fill_cell USING 9 2 0 trls_position_value-sbwhr.
PERFORM fill_cell USING 10 2 0 trls_position_value-purch_pc.
PERFORM fill_cell USING 11 2 0 trls_position_value-charge_pc.
PERFORM fill_cell USING 12 2 0 trls_position_value-impmnt_pc.
PERFORM fill_cell USING 13 2 0 trls_position_value-amort_pc.
PERFORM fill_cell USING 14 2 0 trls_position_value-val_ti_pc.
PERFORM fill_cell USING 15 2 0 trls_position_value-val_idx_pc.
PERFORM fill_cell USING 16 2 0 trls_position_value-val_ch_ti_pc.
PERFORM fill_cell USING 17 2 0 trls_position_value-val_ti_npl_pc.
PERFORM fill_cell USING 18 2 0 trls_position_value-val_idx_npl_pc.
PERFORM fill_cell USING 19 2 0 trls_position_value-val_ch_ti_npl_pc.
PERFORM fill_cell USING 20 2 0 trls_position_value-book_val_pc.
Columns for VC
l_vc_cnt = l_h_cnt + 1.
LOOP AT lt_dfies INTO lwa_dfies.
    IF lwa_dfies-fieldname EQ 'SBWHR' OR
         lwa_dfies-fieldname CP '_VC'.
      PERFORM fill_cell USING l_vc_cnt 3 0 lwa_dfies-scrtext_m.
      l_vc_cnt = l_vc_cnt + 1.
    ENDIF.
ENDLOOP.
Val Curr
PERFORM fill_cell USING 9 4 0 trls_position_value-svwhr.
PERFORM fill_cell USING 10 4 0 trls_position_value-purch_vc.
PERFORM fill_cell USING 11 4 0 trls_position_value-charge_vc.
PERFORM fill_cell USING 12 4 0 trls_position_value-impmnt_vc.
PERFORM fill_cell USING 13 4 0 trls_position_value-amort_vc.
PERFORM fill_cell USING 14 4 0 trls_position_value-val_ti_vc.
PERFORM fill_cell USING 15 4 0 trls_position_value-val_fx_vc.
PERFORM fill_cell USING 16 4 0 trls_position_value-val_idx_vc.
PERFORM fill_cell USING 17 4 0 trls_position_value-val_ch_ti_vc.
PERFORM fill_cell USING 18 4 0 trls_position_value-val_ch_fx_vc.
PERFORM fill_cell USING 19 4 0 trls_position_value-val_fx_npl_vc.
PERFORM fill_cell USING 20 4 0 trls_position_value-val_ti_npl_vc.
PERFORM fill_cell USING 21 4 0 trls_position_value-val_idx_npl_vc.
PERFORM fill_cell USING 22 4 0 trls_position_value-val_ch_ti_npl_vc.
PERFORM fill_cell USING 23 4 0 trls_position_value-val_ch_fx_npl_vc.
PERFORM fill_cell USING 24 4 0 trls_position_value-book_val_vc.
Range for PC and VC
CLEAR: range_list[].
range_item-name = 'RANGE2'.
range_item-rows = '17'.
range_item-columns = '4'.
range_item-code = g_handle->spreadsheet_insertall.
APPEND range_item TO range_list.
CALL METHOD g_handle->set_selection
    EXPORTING
      left    = 1
      top     = 9
      rows    = 17
      columns = 4
    IMPORTING
      retcode = retcode.
CALL METHOD g_handle->insert_range
    EXPORTING
      columns = 4
      rows    = 17
      name    = 'RANGE2'
    IMPORTING
      retcode = retcode.
CALL METHOD g_handle->set_ranges_data
    EXPORTING
      ranges   = range_list
      contents = gt_cell_data
    IMPORTING
      retcode = retcode.
***********************************Form routine****************
FORM fill_cell USING i j bold val.
DATA:
   wa_cell_data TYPE soi_generic_item.
wa_cell_data-row = i.
wa_cell_data-column = j.
wa_cell_data-value = val.
APPEND wa_cell_data TO gt_cell_data.
ENDFORM.                    "FILL_CELL

Solved

Error while Loading data Via Integrator

Hi,
I'm currently following the GettingStarted screencast series 3.0 in youtube.
In the 'loadData.grf', while i'm trying to load data's to data domain after configuring the 'Reformat' and 'ExHashJoin' I'm getting below error, can anyone kindly help me?
INFO [main] - *** CloverETL framework/transformation graph, (c) 2002-2013 Javlin a.s, released under GNU Lesser General Public License ***
INFO [main] - Running with CloverETL library version 3.3.0 build#036 compiled 12/02/2013 18:45:45
INFO [main] - Running on 4 CPU(s), OS Windows 7, architecture amd64, Java version 1.7.0_07, max available memory for JVM 668160 KB
INFO [main] - Loading default properties from: defaultProperties
INFO [main] - Graph definition file: graph/Copy of LoadData1.grf
INFO [main] - Graph revision: 1.17 Modified by: MANJU Modified: Tue Jul 23 08:08:54 IST 2013
INFO [main] - Checking graph configuration...
ERROR [main] - Graph configuration is invalid.
WARN [main] - [Join Dim on Facts:JOIN_DIM_ON_FACTS] - Input port 4 not defined or mapping has too many elements (number of input ports: 4)
ERROR [main] - [ResponseSurvey:RESPONSE_SURVEY] - At least 1 output port must be defined!
ERROR [main] - Error during graph initialization !
Element [1371098357416:LoadData]-Graph configuration is invalid.
at org.jetel.graph.runtime.EngineInitializer.initGraph(EngineInitializer.java:263)
at org.jetel.graph.runtime.EngineInitializer.initGraph(EngineInitializer.java:239)
at org.jetel.main.runGraph.runGraph(runGraph.java:377)
at org.jetel.main.runGraph.main(runGraph.java:341)
Caused by: org.jetel.exception.ConfigurationException: [ResponseSurvey:RESPONSE_SURVEY] - At least 1 output port must be defined!
at org.jetel.exception.ConfigurationProblem.toException(ConfigurationProblem.java:156)
at org.jetel.exception.ConfigurationStatus.toException(ConfigurationStatus.java:106)

Hi,
I've managed to recreate the graph.But stuck with other error on the "Getting started" application.
This time I'm adding "Geography Dim" and "Reseller Dim" through ExHash join to "Join Dims to Fact".
I've got the below error
INFO [main] - *** CloverETL framework/transformation graph, (c) 2002-2013 Javlin a.s, released under GNU Lesser General Public License ***
INFO [main] - Running with CloverETL library version 3.3.0 build#036 compiled 12/02/2013 18:45:45
INFO [main] - Running on 4 CPU(s), OS Windows 7, architecture amd64, Java version 1.7.0_07, max available memory for JVM 668160 KB
INFO [main] - Loading default properties from: defaultProperties
INFO [main] - Graph definition file: graph/LoadData.grf
INFO [main] - Graph revision: 1.26 Modified by: MANJU Modified: Thu Jul 25 23:54:02 IST 2013
INFO [main] - Checking graph configuration...
INFO [main] - Graph configuration is valid.
INFO [main] - Graph initialization (LoadData)
INFO [main] - [Clover] Initializing phase: 0
INFO [main] - [Clover] phase: 0 initialized successfully.
INFO [WatchDog] - Starting up all nodes in phase [0]
INFO [WatchDog] - Successfully started all nodes in phase!
ERROR [WatchDog] - Graph execution finished with error
ERROR [WatchDog] - Node GEOGRAPHY_DIM finished with status: ERROR caused by: Component pre-execute initialization failed.
ERROR [WatchDog] - Node GEOGRAPHY_DIM error details:
Element [GEOGRAPHY_DIM:Geography Dim]-Component pre-execute initialization failed.
at org.jetel.graph.Node.run(Node.java:458)
at java.lang.Thread.run(Thread.java:722)
Caused by: java.lang.ArrayIndexOutOfBoundsException: 10
at org.jetel.data.parser.AhoCorasick.isPattern(AhoCorasick.java:182)
at org.jetel.data.parser.CharByteDataParser$ByteRecordSkipper.skipInput(CharByteDataParser.java:1594)
at org.jetel.data.parser.CharByteDataParser.skip(CharByteDataParser.java:264)
at org.jetel.util.MultiFileReader.skip(MultiFileReader.java:341)
at org.jetel.util.MultiFileReader.nextSource(MultiFileReader.java:286)
at org.jetel.util.MultiFileReader.preExecute(MultiFileReader.java:498)
at org.jetel.component.DataReader.preExecute(DataReader.java:237)
at org.jetel.graph.Node.run(Node.java:456)
... 1 more
INFO [WatchDog] - [Clover] Post-execute phase finalization: 0
INFO [WatchDog] - [Clover] phase: 0 post-execute finalization successfully.
INFO [WatchDog] - Execution of phase [0] finished with error - elapsed time(sec): 0
ERROR [WatchDog] - !!! Phase finished with error - stopping graph run !!!
INFO [WatchDog] - -----------------------** Summary of Phases execution **---------------------
INFO [WatchDog] - Phase# Finished Status RunTime(sec) MemoryAllocation(KB)
INFO [WatchDog] - 0 ERROR 0 27979
INFO [WatchDog] - ------------------------------** End of Summary **---------------------------
INFO [WatchDog] - WatchDog thread finished - total execution time: 5 (sec)
INFO [main] - Freeing graph resources.
ERROR [main] - Execution of graph failed !
kindly help.

Error while exporting data via Tcode CNS43 by using spreadsheet(XXL) option

Similar Messages

Maybe you are looking for