Error while generating runtime objects in SEGW

Hello Experts,
we are facing this issue when trying to generate runtime objects in SEGW. please find the attached image for more details.
Repaired objects cannot be included in dev./correction &I3DK910030&’.
Thanks and Regards,
Mallik

Hi,
well, I guess if you mean you did reset the queue - you deleted all emtries with error. Try to avoid this in the future - you will get unwanted side effects by that. There are only a few errors that make this behaviour necessary.
Usually you should select the entry on the first screen - so you see the status of the queue on the second one. On there you can select the queue and while pressing the green tick, you can restart it. If it is a timeout - this restart usually helps.
Wondering why you have an issue with basis objects - did you run through the complete setup guide up to this point?
Regard,
Oliver

Similar Messages

Error while generating Data Objects in sdoe_wb SAP for Basis component

Dear all,
While generating SAP BASIS Components getting error
After installations of SAP Netweaver Mobile 7.1 SP11 and all the Notes applied for SP11 i have done the Generation for all the SAP BASIS Data Objects
All the Data objects are generated except AGENT_CONFIG, ARCHIVE
When i check the same in smq2 it shows the error in Function module SDOE_GENERATE_MBO for the user FUNC001,in status text it shows "connection closed (no data)"
kindly help on this issue.
Regards
Revanth

Hi,
well, I guess if you mean you did reset the queue - you deleted all emtries with error. Try to avoid this in the future - you will get unwanted side effects by that. There are only a few errors that make this behaviour necessary.
Usually you should select the entry on the first screen - so you see the status of the queue on the second one. On there you can select the queue and while pressing the green tick, you can restart it. If it is a timeout - this restart usually helps.
Wondering why you have an issue with basis objects - did you run through the complete setup guide up to this point?
Regard,
Oliver

Unable to view settings tab in one GPO. "An error occurred while generating report: Object reference not set to an instance of an object."

I am the owner of this GPO and I can view the settings tab in any other GPO. But, I get the following message when I try to view the settings tab in one particular GPO:
An error occurred while generating report:
Object reference not set to an instance of an object.
Other posts I look at reference the same error, but with different circumstances, and thus, they specify that the hotfix is for to fix the error under
those circumstances.
I'm accessing GPMC on a Win 7 SP1 machine. DC is Server 2012 Standard.

> Since I have to go through Edit to see the settings, and peruse the
> entire massive folder of settings to try to identify the bad one, it has
> been slow-going and I haven't found it yet.
You can filter ADM templates to show configured ones only, and you can
use the "show all settings" node. This will speed the work up - a little
bit at least :)
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

GPM Custom GPO-Settings: An error occurred while generating report: Object reference not set to an instance of an object.

Hello,
As you can tell from the title of this question, I am no expert with GPO's. Before I begin, I spent a few minutes to an hour searching and reading in hopes of finding the solution and avoid putting myself out there as a "GPO Newb". While
I found several posts and answers that were similar and were related, the questions and answers were more advanced and did present the solutions providing the person had initial knowledge already. That is not necessarily my case and I would ask for a
little patience and a bit of 'hand-holding' for what I need.
I run SBS 2011, and in Group Policy Management I have a custom GPO. In this GPO I define all my settings. I understand this may not be the best or most practical method of applying policies, but I am not very strict and have few settings. This
policy existed prior to my joining the company, and was migrated in to this SBS '11 from SBS '03. That may be the issue, but before making any changes I am seeking expert advice.
When I select that GPO, named "Main GPO", and click on the tab at the top "Settings" I see the error: "An error occurred while generating report: Object reference not set to an instance of an object."
I saw that when I right click the GPO > View > Options and select the tab "Reporting" that it states that for reporting to work the location of the .adm files must be specified. I see that my option for the location is set to "Default"
which by my guessing would be located in the C:\Windows\sysvol directory. Below is what I see there:
C:\Windows\sysvol\domain
C:\Windows\sysvol\staging
C:\Windows\sysvol\staging areas
C:\Windows\sysvol\sysvol
I think the problem is that my custom GPO are not inside the default location, which I speculate is: C:\Windows\sysvol\domain\policies (which I do see some objects there).
But instead I also see items in this folder: C:\Windows\sysvol\sysvol\JOHN.LOCAL\policies (while where I just typed 'JOHN.LOCAL' is my actual local domain).
To further this, when I edit that custom GPO, then at the very top of the tree I right click on it and select Properties, I see a Unique Name listed there as a long string of numbers and letters, similar to a registry entry. I searched my server for
that same Unique Name and found it listed inside the folder: C:\Windows\sysvol\domain\policies
If I am correct with my assumption and basic knowledge, I should move all objects as follows:
-Move FROM: C:\Windows\sysvol\domain\policies
-Move TO: C:\Windows\sysvol\sysvol\JOHN.LOCAL\policies
My concerns are that I am not correct at all, that I will break something, that there may be an easier fix than moving anything, or that I am overlooking something causing this error altogether.
Thank you for anyone's help and time with assisting me with this request.
John Fester

> top "Settings" I see the error: "An error occurred while generating
> report: Object reference not set to an instance of an object."
That's due to a security setting (most possibly) your current OS does
not understand. Hard to find out wich exact setting it is... To resolve
this issue, we need the gtpptmpl.inf file residing in the policiy's
sysvol folder. To open this folder, edit the policy, move to computer
settings - policies - windows settings - scripts - startup, press "show
files". Then move two folders upwards and back down to
.\microsoft\windows nt\secedit. There you'll see the gpttmpl.inf - post
its contents and we'll have a look at it.
> location, which I speculate is: C:\Windows\sysvol\domain\policies (which
> folder: C:\Windows\sysvol\sysvol\JOHN.LOCAL\policies (while where I just
That's perfectly ok - JOHN.LOCAL in fact is a symlink pointing to "domain".
> all objects as follows:
> -Move FROM: C:\Windows\sysvol\domain\policies
> -Move TO: C:\Windows\sysvol\sysvol\JOHN.LOCAL\policies
No.
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Error while generating a role

Hi SAP Techies,
I am getting the following error while generating a role,
"18 field value(s) for object K_CCA were not entered in the profile"
Can you please provide me a solution to fix this problem.
Thanks.
Regards,
Agustuss

How many cost centres are you putting in the role? Do you have cost centre set as an org level?
From your User Name I assume that you are at the BBC...Do you still use a program to populate the cost centres in the role based on the cost centre group names? If so it is possible that you are trying to put too many cost centres in the field and the the profile will not generate because of this (we had it back in 2001 when I was working there).
Do you have the technical error message details?

ERROR while generating CAP file

Hello,
Iam trying to generate a cap file of JCRMI applet. Iam getting the following errors while generating a CAP file. Can anybody help me.
Thanks in advance,
With Regards,
Abhishek Goud
{color:#ff0000}{color:#008080}*C:\Documents and Settings\Administrator\Desktop\Demo>converter -classdir C:\jav*
a_card_kit-2_2_2\lib -exportpath C:\java_card_kit-2_2_2\api_export_files;C:\java
cardkit-2_2_2\lib -applet 0xa0:0x00:0x00:0x00:0x62:0x03:0x01:0x08:0x01 PurseAp*
plet com.sun.javacard.samples.RMIDemo 0xa0:0x00:0x00:0x00:0x62:0x12:0x34 1.3
{color}
Java Card 2.2.2 Class File Converter, Version 1.3
Copyright 2005 Sun Microsystems, Inc. All rights reserved. Use is subject to lic
ense terms.
warning: You did not supply export file for the previous minor version of the pa
ckage
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unsupported type long of
field serialVersionUID.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unhandled bytecode goto
in clinit method, try a different compiler.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unsupported bytecode inv
okestatic in clinit method.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unsupported parameter ty
pe String of invoked method class$(java.lang.String) of class com.sun.javacard.s
amples.RMIDemo.PurseImpl_Stub.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unsupported bytecode ane
warray in clinit method.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unsupported bytecode aas
tore in clinit method.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unsupported bytecode inv
okevirtual in clinit method.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unsupported parameter ty
pe String of invoked method getMethod(java.lang.String, java.lang.Class) of clas
s java.lang.Class.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unhandled bytecode ifnul
l in clinit method, try a different compiler.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unhandled bytecode goto
in clinit method, try a different compiler.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unsupported bytecode inv
okestatic in clinit method.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unsupported parameter ty
pe String of invoked method class$(java.lang.String) of class com.sun.javacard.s
amples.RMIDemo.PurseImpl_Stub.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unsupported bytecode ane
warray in clinit method.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unsupported bytecode aas
tore in clinit method.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unsupported bytecode inv
okevirtual in clinit method.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unsupported parameter ty
pe String of invoked method getMethod(java.lang.String, java.lang.Class) of clas
s java.lang.Class.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unhandled bytecode ifnul
l in clinit method, try a different compiler.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unhandled bytecode goto
in clinit method, try a different compiler.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unsupported bytecode inv
okestatic in clinit method.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unsupported parameter ty
pe String of invoked method class$(java.lang.String) of class com.sun.javacard.s
amples.RMIDemo.PurseImpl_Stub.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unsupported bytecode ane
warray in clinit method.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unsupported bytecode inv
okevirtual in clinit method.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unsupported parameter ty
pe String of invoked method getMethod(java.lang.String, java.lang.Class) of clas
s java.lang.Class.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unhandled bytecode ifnul
l in clinit method, try a different compiler.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unhandled bytecode goto
in clinit method, try a different compiler.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unsupported bytecode inv
okestatic in clinit method.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unsupported parameter ty
pe String of invoked method class$(java.lang.String) of class com.sun.javacard.s
amples.RMIDemo.PurseImpl_Stub.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unsupported bytecode ane
warray in clinit method.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unsupported bytecode inv
okevirtual in clinit method.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unsupported parameter ty
pe String of invoked method getMethod(java.lang.String, java.lang.Class) of clas
s java.lang.Class.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unhandled bytecode ifnul
l in clinit method, try a different compiler.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unhandled bytecode goto
in clinit method, try a different compiler.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unsupported bytecode inv
okestatic in clinit method.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unsupported parameter ty
pe String of invoked method class$(java.lang.String) of class com.sun.javacard.s
amples.RMIDemo.PurseImpl_Stub.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unsupported bytecode ane
warray in clinit method.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unhandled bytecode ifnul
l in clinit method, try a different compiler.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unhandled bytecode goto
in clinit method, try a different compiler.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unsupported bytecode inv
okestatic in clinit method.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unsupported parameter ty
pe String of invoked method class$(java.lang.String) of class com.sun.javacard.s
amples.RMIDemo.PurseImpl_Stub.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unsupported bytecode aas
tore in clinit method.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unsupported bytecode inv
okevirtual in clinit method.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unsupported parameter ty
pe String of invoked method getMethod(java.lang.String, java.lang.Class) of clas
s java.lang.Class.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unhandled bytecode goto
in clinit method, try a different compiler.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unhandled bytecode pop i
n clinit method, try a different compiler.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unsupported bytecode new
in clinit method.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unsupported bytecode inv
okespecial in clinit method.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unsupported parameter ty
pe String of invoked method <init>(java.lang.String) of class java.lang.NoSuchMe
thodError.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unsupported bytecode ath
row in clinit method.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unsupported parameter ty
pe String of method class$.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unsupported parameter ty
pe String of invoked method forName(java.lang.String) of class java.lang.Class.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unsupported return type
String of invoked method getMessage() of class java.lang.Throwable.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unsupported parameter ty
pe String of invoked method <init>(java.lang.String) of class java.lang.NoClassD
efFoundError.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unsupported long type co
nstant.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unsupported parameter ty
pe long of invoked method invoke(java.rmi.Remote, java.lang.reflect.Method, java
*.lang.Object, long) of class java.rmi.server.RemoteRef.*
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unsupported String type
constant.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unsupported parameter ty
pe String of invoked method <init>(java.lang.String, java.lang.Exception) of cla
ss java.rmi.UnexpectedException.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unsupported long type co
nstant.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unsupported parameter ty
pe long of invoked method invoke(java.rmi.Remote, java.lang.reflect.Method, java
*.lang.Object, long) of class java.rmi.server.RemoteRef.*
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unsupported String type
constant.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unsupported parameter ty
pe String of invoked method <init>(java.lang.String, java.lang.Exception) of cla
ss java.rmi.UnexpectedException.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unsupported long type co
nstant.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unsupported parameter ty
pe long of invoked method invoke(java.rmi.Remote, java.lang.reflect.Method, java
*.lang.Object, long) of class java.rmi.server.RemoteRef.*
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unsupported String type
constant.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unsupported parameter ty
pe String of invoked method <init>(java.lang.String, java.lang.Exception) of cla
ss java.rmi.UnexpectedException.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unsupported long type co
nstant.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unsupported parameter ty
pe long of invoked method invoke(java.rmi.Remote, java.lang.reflect.Method, java
*.lang.Object, long) of class java.rmi.server.RemoteRef.*
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unsupported String type
constant.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unsupported parameter ty
pe String of invoked method <init>(java.lang.String, java.lang.Exception) of cla
ss java.rmi.UnexpectedException.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unsupported long type co
nstant.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unsupported parameter ty
pe long of invoked method invoke(java.rmi.Remote, java.lang.reflect.Method, java
*.lang.Object, long) of class java.rmi.server.RemoteRef.*
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unsupported String type
constant.
error: com.sun.javacard.samples.RMIDemo.PurseImpl_Stub: unsupported parameter ty
pe String of invoked method <init>(java.lang.String, java.lang.Exception) of cla
ss java.rmi.UnexpectedException.
{color}
conversion completed with 73 errors and 1 warnings.

It seems there is a variable of type "long" in your applet. The "long" type is not supported by Java Card, so you should remove all variables with type "long".
Otherwise, without the source code, it is difficult to help you find out what's wrong.

ERROR WHILE GENERATING ARE-1 doc internal number

Dear sir
while creating ARE-1 Doc following error getting
error while generating ARE 1 DOC internal number
message no : 4F238
I MAINTAIN ALL NO RANGE OBJECT ALSO THEN ALSO GETTING ERROR
Sl No
Object
Tocde
Module
After Closing the Year ;
Maintain the Number ranges for following number
range objects related to CIN for the New year
Excise/
Series Group
1
J_1IINTNUM
SNRO/SNUM
Internal Document number to be Generated
2
J_1IRG23A1
SNRO/SNUM
MM
RG23A PART1 number Range object
3
J_1IRG23A2
SNRO/SNUM
MM
RG23A PARTII number Range object
4
J_1IRG1
SNRO/SNUM
SD
RG1 Number range object
5
J_1IRG23C1
SNRO/SNUM
MM
RG23C Part1 Number Range Object
6
J_1IRG23C2
SNRO/SNUM
MM
RG23C PartII Number Range Object
7
J_1IPLA2
SNRO/SNUM
MM
PLA PartII number Range Object
8
J_1IINTPR2
SNRO/SNUM
SD
Despatch Serial number
9
J_1IEXCLOC
SNRO/SNUM
SD
DOMESTIC EXCISE INVOICE
10
J_1IDEPINV
SNRO/SNUM
SD
EXCISE INVOICE FOR PLANT STO
11
J_1IEXCEXP
SNRO/SNUM
SD
Export excise invoice number range
12
J_1I57FC
SNRO/SNUM
MM
57FC Number Range Object
13
J_1IARE1
SNRO/SNUM
SD
ARE1 Series Group
14
J_1IARE3
SNRO/SNUM
SD
ARE3
15
J_1IBOND
SNRO/SNUM
SD
Bond Maintain (2007)
16
J_1ILIC
SNRO/SNUM
SD
Licence capture - CT3 maintain (2007)
THANKS & REGARD:
ROHIT NARSALE
9624886654

check whether You activated the SPRO setting for BEX.
SPRO -->SAP Business Information Warehouse --> reporting relevant settings -->
general reporting settings > activate personilisation in BEX>
P

Error while generating PDF - in Bex Web

Hi Experts,
I am currently having the issue that I receive the error "Error while generating PDF" when using the "Print Version" functionality. This problem only occurrs for the Bex Web Query. I know that the ADS service is configured correctly- The webservice test is successful and other applications (Guided Procedures, MSS) also use it successfully.
Please see below the excerpt from the default trace:
A message was generated:
ERROR
Error while generating PDF
com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode PageExportRenderingRootNode_0001
Message: 28
Stack trace: java.lang.ArrayIndexOutOfBoundsException: 28
at com.sap.ip.bi.export.xfa.impl.SizeCalculator.getColumnSizes(SizeCalculator.java:178)
at com.sap.ip.bi.export.impl.ExportController.setSizes(ExportController.java:220)
at com.sap.ip.bi.export.impl.ExportController.calculateAndSetSizes(ExportController.java:611)
at com.sap.ip.bi.export.impl.ExportController.doExportPrep(ExportController.java:408)
at com.sap.ip.bi.export.impl.ExportController.convert(ExportController.java:336)
at com.sap.ip.bi.export.controller.ExportResult.createExport(ExportResult.java:58)
at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.createPDF(PageExportRenderingRootNode.java:453)
at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.doExport(PageExportRenderingRootNode.java:105)
at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.processRendering(PageExportRenderingRootNode.java:252)
at com.sap.ip.bi.webapplications.runtime.impl.Page.buildRenderingTree(Page.java:3809)
at com.sap.ip.bi.webapplications.runtime.impl.Page.processRenderingRootNode(Page.java:3867)
at com.sap.ip.bi.webapplications.runtime.impl.Page.processRendering(Page.java:3510)
at com.sap.ip.bi.webapplications.runtime.impl.Page.doProcessRequest(Page.java:3470)
at com.sap.ip.bi.webapplications.runtime.impl.Page.processRequest(Page.java:2489)
at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.doProcessRequest(Controller.java:892)
at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.processRequest(Controller.java:813)
at com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService.handleRequest(BIRuntimeService.java:456)
at com.sap.ip.bi.webapplications.runtime.jsp.portal.components.LauncherComponent.doContent(LauncherComponent.java:21)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
If you have any idea or clue it would be greatly appreciated.
Thanks in advance for every support,
Jan

Hi Jan,
Most possible causes for encountering this issue are:
Possible cause:
- The ADS is installed on a plattform, that is currently not supported by SAP for ADS. Please check the avaliablity at: Product Availability Matrix
- Mixing of different Netweaver releases (NW04 and NW04s) -> This is unfortunatelly not possibble the J2EE engine release has to match with the ABAP stack release in order connect them properly.
- The ADS SP level does not match the J2EE engine SP level. -> Please update the software components to have the same support package level.
Hope this helps!!
Regards,
Arafat

Error while generating screens in BDT

Hi All,
I getting following error while generating screens using t-code BUSP for a CAA2 t-code
"Client 040 appl.object REWB screen REWB10:Error during subscreen container gener
Message no. R11520
Diagnosis
Errors have occurred during screen generation. The reasons for this could be:
The maximum length of the screen was exceeded. There may be no more than 199 lines per subscreen container.
The maximum number of lines for the header-data area was exceeded. There may be no more than 15 lines in the header-data section.
Procedure
Check both of these potential sources of errors in the relevant screen, and make the necessary changes.
Could some body help me in this regards?
with regards,
Sumanth

Hi,
For a dynpro there are 199 Lines available for screen elements and on the average the restriction of 10 views per section and 10 sections per screen. Just check this.
Thanks and warm regards,
Smita.

InfoSet Query: Syntax Error while generating the program.

Dear All,
I have a Query in CRM system which contains an Infoset based on LDB.
The InfoSet Query throws up a Syntax error while generating the program.
So, we are not able to change the Infoset using the Infoset Query through SQ01.
The error is as follows:-
Syntax error in program "AQZZ==/SAPQUERY/CRM_ACTMON1 ".
Error in the ABAP Application Program
The current ABAP program "CL_QUERY_OUTPUT_DEFINITION====CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "AQZZ==/SAPQUERY/CRM_ACTMON1 "
in include "AQZZ==/SAPQUERY/CRM_ACTMON1 " in
line 28:
""CRMT_REPORT_LOCATORLIST" must be a flat structure. You cannot use int"
"ernal tables, strings, references, or structures as components. -"
Please help me arrive at an solution, so that we are able to change the Infoset through the InfoSet Query.
Awaiting your reply as soon as possible.
Thanks and Regards,
Pankaj.

There is an error in your query, specifically in the definition of CRMT_REPORT_LOCATORLIST. In the short dump (transaction ST22) you will see more details and the exact location of an error if you just scroll down.
I can't tell more because this problem is specific to your system, to which I have no access. Read the whole dump and look at all the objects mentioned there.

An error that "error while generating pdf".

Hi gurus,
when i am trying to generate a pdf from phap_admin (appraisal document ) i am getting an error that "error while generating pdf".
the dump in st22 is
ERROR ANALYSIS:
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_SEND_DYNPRO_NO_RECEIVER', was
not caught and
therefore caused a runtime error.
The reason for the exception is:
During background processing, the system attempted to send a
screen to a user.
Current screen: " " " ".
SOURCE CODE:
screen to enter order-number ***************************************
    IF w_suppress_dialog EQ space.
set popup to the foreground.
CALL FUNCTION 'SAPGUI_SET_PROPERTY'
     DESTINATION 'SAPGUI'
    EXPORTING
     property = 'ACTIVATE'
     value    = 'X'
    EXCEPTIONS
     OTHERS   = 1.
      CALL SCREEN 300 STARTING AT lv_start_column lv_start_row.
>>>>    ELSE.
    process the same forms which are processed on screen 0300.
    ATTENTION: Whenever functionality of screen 0300 is extended,
    make sure that necessary calls are also made here!
      PERFORM d0300_read_data.
      PERFORM d0300_comline.
    ENDIF.
    CASE w_next_action.
      WHEN 'ATTR'.
        PERFORM show_object_attributes     USING wt_e071[].
CAN ANY ONE HELP TO SOLVE THIS???

Hi,
the dump says:
CALL SCREEN 300 STARTING AT lv_start_column lv_start_row.
>>>> ELSE.
This means, the raise of the exception comes from the command before ELSE and this is CALL SCREEN.
CALL SCREEN is only reachable. if w_suppress_dialog is SPACE. It can't be 'X'.
You have to find a way to set it to 'X'.
Regards,
Klaus

Error : while Importing SAP Objects in ESR.

I am getting error, while importing SAP object in a scenario in ESR.
What can be the issue ? as we have configured all the beckend settings & sldcheck is also OK.
Also, we are using proxy scenarios are working fine on system.
The details are as below :
    at com.sap.aii.ib.server.upload.UploadServiceBean.openSAPSource(UploadServiceBean.java:88)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:46)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:71)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatefulTransactionAssociation.invoke(Interceptors_StatefulTransactionAssociation.java:43)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:189)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatefulSessionInstanceGetter.invoke(Interceptors_StatefulSessionInstanceGetter.java:37)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttribute(Interceptors_Transaction.java:38)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.invoke(Interceptors_Transaction.java:22)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:21)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:16)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    at com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:133)
    at com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:164)
    at $Proxy1366.openSAPSource(Unknown Source)

Hello,
Have you used the notes to import ESR content?
Refer to one of them according to your system version:
PI 7.1X:
#1152640 - SAP NetWeaver 7.1 including EHP 1: Importing ESR content
XI 7.0:
#836200 - SAP NetWeaver 7.0: Importing Process Integration Content
XI 3.0:
#705541 - XI 3.0 (SP1 and higher): Importing XI Content
Regards,
Caio Cagnani

Getting status as ERROR while instantiating Business Object in work flow?

Hi,
Getting status as ERROR while instantiating Business Object in work flow.
How to rectify it.
Tahnks in Advance.
Moderator message: please have a look at the dedicated Workflow forum on SCN.
Edited by: Thomas Zloch on Jan 19, 2012

Hi,
Go to SWDD and create a new workflow. This workflow will have two steps. This is just for test purpose so we are not going to define any triggering event etc. First step will instantiate (creating a runtime object) a business object and second step will use that runtime object to execute one of its method. We know that to instantiate any BO we need the object key to be passed. Key uniquely identifies a runtime instance of Business Object (henceforth we will refer it as BO or business object interchangeably).
use Business Object SYSTEM and method GENERICINSTANTIATE to instantiate any Business Object in workflow

Error while creating info object

error while creating info object a character
Info object may be a maximum of 000060 digits...... what would be the error?
Thanks ALL

Hi,
The maximum length supported by one CHAR type infoobject is 60. Check whether you have assigned more.
If you have to load more length ( more than 60) split the total thing into different infoobjects. Create different infoobjects and split the total thing into them - like 1st 60 char in 1st infoobject, char 61-120 in 2nd infoobject and so on. Then you can again concatenate them.
Thanks,
Indrashis

Error while generating the report on Test env (for divide condition)

Hi All,
I am facing the below error while generating the report in test environment while the same report is working fine on Prod environment.
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 16001] ODBC error state: S1000 code: 1791 message: [Oracle][ODBC][Ora]ORA-01791: not a SELECTed expression. [nQSError: 16001] ODBC error state: S1000 code: 1791 message: [Oracle][ODBC][Ora]ORA-01791: not a SELECTed expression. [nQSError: 16015] SQL statement execution failed. (HY000)
Actually the error is coming for the below logics:
COUNT(DISTINCT RMA.RMA)/COUNT(DISTINCT User."User Name")
"RMA Fact"."Module Backlog"/COUNT(DISTINCT User."User Name")
Can anyone please tell if I need to make any configuration changes as the same logic works perfectly fine on production but not on test.
Thanks in advance

Is anyone having any idea about it...

Error while generating runtime objects in SEGW

Similar Messages

Maybe you are looking for