Error while importing text file to Power Pivot via Table Import Wizard

Hello there,
I'm a rookie at handling Excel to be honest. I've been trying to import a .txt file to Excel (it contains around 14 million rows of information) but Excel won't let me since it can only handle around 1 million rows per sheet (too troublesome to do such thing
14 times in 14 different sheets). Then I googled that Power Pivot let me handle around 100 million rows in a Pivot.
I'm trying to import this .txt file to Power Pivot by doing the following:
Home tab > From Text > File Path (insert .txt location here) > Finish
After that it shows the Table Import Wizard retrieving the rows from the .txt file. Problem is... at the end of the import (once it hits row 14,000,000 or so) it shows an error. It states the following:
"Memory error: Allocation failure : Not enough storage is available to process this command. .
The current operation was cancelled because another operation in the transaction failed."
Please note that the size of the .txt file is 900 MB.
Another thing is that, when I select the .txt file from its location at the File Path section, the "preview" field only shows 50 rows, not all of them. Is that okay to happen?
Is it because the size of the .txt file is too big?
Please let me know if you need more info in regards to this.
Thanks in advance.

Hi AdiUser,
Only showing 50 rows for the preview is normal behaviour. Based on what you've described, it sounds like Power Pivot is running out of memory when you are loading this .txt file. Are you running the 32 bit or 64 bit version of Excel. Also, if you are running
the 64 bit version how much RAM is available?
If you're running the 32 bit version then the available RAM for Power Pivot is less than 1 GB even if the system has more than this installed. You can address this by installing the 64 bit version. If you're running the 64 bit version then it may be
that you don't have enough RAM to accommodate this amount of data and you may consider upgrading the RAM. Alternatively, you could try and reduce the size of the table in memory by using the preview screen to remove any columns that are not of use. This
is especially important if there are any column with a high number of unique values that aren't actually needed in the model. In addition to removing columns altogether, you could try filtering the data so that only a subset of the rows are imported.
This can also be done from the preview screen.
Regards,
Michael Amadi
Please use the 'Mark as answer' link to mark a post that answers your question. If you find a reply helpful, please remember to vote it as helpful :)
Website: http://www.nimblelearn.com
Blog: http://www.nimblelearn.com/blog
Twitter: @nimblelearn

Similar Messages

Error while determining ref.mov.type for WM via Table 156S: 647/ / / /L/ /

Guyz,
Firstly despite the plant+storage location + warehouse no. assignments are done , my replenishment delivery (delivery for stock transport order between plants under same company code) is not picking up storage location and warehouse no and thus stopping me from doing picking and PGI (post goods issue).
However in VL02N when i'm trying to change storage location for line item, i'm getting following weird error
*Error while determining ref.mov.type for WM via Table 156S: 647/ / / /L/ /*
I found a SAP Note(133223) regarding this error and VL02 transaction but that note was specific to older versions. I'm on ECC 6.0
Any suggestions please ?
Thanks

Warehouse managment has its own movement types, most identical to inventory management movement types.
These WM movement types are determined via reference movement types.
the error you have just looks like your customizing is not complete.
IMG > LE > WM > Interfaces > IM > define movement types.

Error messag -'Error while determining ref.mov.type for WM via Table 156S:'

Hi Guys,
I am currently facing some issues with respect to the deliver creation.
The scenario is somthing like this.
I have assigned a FOC Item category to an Consignment Issue order type.
The system is able to determine the Item category successfully.
However when the delivery is created it throws an error message
'Error while determining ref.mov.type for WM via Table 156S: 903/X/X/W/L/X/'
Not sure why this occurs.
All the settings seem to be set.
If any one of you can help me out it would be great.
Thanks.
Regards,
Pandi

Dear Pandiraj
The standard process is that consignment issue order should be created with reference to Proforma invoice. Having said that I dont understand why you have assigned a FOC item category to issue order. Not sure, whether this will work. Also I feel that you should explain in detail the process for which you are configuring this.
thanks
G. Lakshmipathi

Error while determining ref.mov.type for WM via table 156S:601///

Hi SAP gurus
while doing delivery i am getting error like
Error while determining ref.mov.type for WM via table 156S:601///
please give me needful solution
regards
Sarvesh

Chk via
SPRO>LE>WM>Interfaces>IM>Define mvt>Assign MVt reference...and then LE-WM interface...
maintina the correspoding entries..
BR,
Krishna

Error while uploading text file....

Halo Friends,
I am uploading 4 text files which contain three columns separated by a tab, but when i am trying to upload those files using WS_UPLOAD Function Module i am getting a runtime error saying 'error while uploading/downloading'.
Please solve this problem as soon as possible.
Thanks in Advance,
rama

Halo again,
Now that i am able to upload the files, i need to update the database table the update statement is executing correctly but when i debug i see that the sy-subrc value is 4 but not 0.
and hence the it is not committed.
Any suggestions. i am pasting my code here for your reference:
Tables: qmfe.
data: begin of gt1_qmfe occurs 0,
 qmnum like qmfe-qmnum,
 fenum like qmfe-fenum,
 /itml/usr20 like qmfe-/itml/usr20,
 end of gt1_qmfe.
data: begin of gt2_qmfe occurs 0,
 qmnum like qmfe-qmnum,
 fenum like qmfe-fenum,
 /itml/usr21 like qmfe-/itml/usr21,
 end of gt2_qmfe.
data: begin of gt3_qmfe occurs 0,
 qmnum like qmfe-qmnum,
 fenum like qmfe-fenum,
 /itml/usr19 like qmfe-/itml/usr19,
 end of gt3_qmfe.
data: begin of gt4_qmfe occurs 0,
 qmnum like qmfe-qmnum,
 fenum like qmfe-fenum,
 /itml/usr07 like qmfe-/itml/usr07,
 end of gt4_qmfe.
data: gs1_qmfe like line of gt1_qmfe,
 gs2_qmfe like line of gt2_qmfe,
 gs3_qmfe like line of gt3_qmfe,
 gs4_qmfe like line of gt4_qmfe.
data: ls_lines1 type i,
 ls_lines2 type i,
 ls_lines3 type i,
 ls_lines4 type i.
parameters: ip_file1 type RLGRAP-FILENAME default 'C:\Urgent\TextFiles\StoDt.txt' obligatory,
 ip_file2 type RLGRAP-FILENAME default 'C:\Urgent\TextFiles\RcDtCust.txt' obligatory,
 ip_file3 type RLGRAP-FILENAME default 'C:\Urgent\TextFiles\DockDate.txt' obligatory,
 ip_file4 type RLGRAP-FILENAME default 'C:\Urgent\TextFiles\AWB.txt' obligatory.
field-symbols: <fs1> like gs1_qmfe,
 <fs2> like gs2_qmfe,
 <fs3> like gs3_qmfe,
 <fs4> like gs4_qmfe.
perform upload_gt1_qmfe.
perform upload_gt2_qmfe.
perform upload_gt3_qmfe.
perform upload_gt4_qmfe.
perform update_qmfe.
*& Form upload_gt1_qmfe
 text
--> p1 text
<-- p2 text
FORM upload_gt1_qmfe .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
 FILENAME = ip_file1
 FILETYPE = 'DAT'
TABLES
 DATA_TAB = gt1_qmfe.
describe table gt1_qmfe lines ls_lines1.
write: / ls_lines1.
ENDFORM. " upload_gt1_qmfe
*& Form upload_gt2_qmfe
 text
--> p1 text
<-- p2 text
FORM upload_gt2_qmfe .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
 FILENAME = ip_file2
 FILETYPE = 'DAT'
TABLES
 DATA_TAB = gt2_qmfe.
describe table gt2_qmfe lines ls_lines2.
write: / ls_lines2.
ENDFORM. " upload_gt2_qmfe
*& Form upload_gt3_qmfe
 text
--> p1 text
<-- p2 text
FORM upload_gt3_qmfe .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
 FILENAME = ip_file3
 FILETYPE = 'DAT'
TABLES
 DATA_TAB = gt3_qmfe.
describe table gt3_qmfe lines ls_lines3.
write: / ls_lines3.
ENDFORM. " upload_gt3_qmfe
*& Form upload_gt4_qmfe
 text
--> p1 text
<-- p2 text
FORM upload_gt4_qmfe .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
 FILENAME = ip_file4
 FILETYPE = 'DAT'
TABLES
 DATA_TAB = gt4_qmfe.
describe table gt4_qmfe lines ls_lines4.
write: / ls_lines4.
ENDFORM. " upload_gt4_qmfe
*& Form update_qmfe
 text
--> p1 text
<-- p2 text
FORM update_qmfe .
data ls_cnt type i.
loop at gt1_qmfe assigning <fs1>.
update qmfe set /itml/usr20 = <fs1>-/itml/usr20
 where qmnum = <fs1>-qmnum
 and fenum = <fs1>-fenum.
if sy-subrc = 0.
commit work.
add 1 to ls_cnt.
endif.
endloop.
write: / ls_cnt.
ENDFORM. " update_qmfe

Importing text file (delimited, fixed width) with MDM Import Manager?

Hello all,
According to the overview section of the import manager reference guide, it is possible to import from delimited text files (e.g. CSV).
But when it comes to the details, text files are not mentioned anymore. I also found no option in the Import Manager.
Could you tell me whether this is possible and - if it is - how?
Thanks in advance!
Kind regards,
Dennis

Hi Dennis,
In order to import flat files into MDM do the following. This solution is specific to MS Windows:
I. Set up ODBC for *.txt or *.csv files
1. Open Data Sources (ODBC) interface:
Start> Settings> Control Panel--> Administrative Tools -->Data Sources (ODBC).
2. Select System DSN Tab in Data Sources (ODBC) interface.
3. Click on [Add]. Select the Microsoft Text Driver. Click Finish.
4. Write a Data Source Name
5. Uncheck Use Current Directory to enable the [Select Directory] button.
6. Click on [Select directory] to determine the source directory.
7. Select the source file.
8. Click [OK] and return to the ODBC Text Setup screen.
9. Click [OK].
10. Return to the ODBC Data Source Administrator dialog and click [OK].
II. Importing from Flat file
1. Run MDM Import Manager.
2. Select ODBC from the Type drop-down field of the Connect To Source dialog.
3. Enter the DSN name from the Setup ODBC Connection dialog above.
4. Select the file name with extension (.csv or .txt) in the Tables panel of MDM Import Manager and the file content in the Records panel.
Hope this solved your problem.Please mark helpful answers
Regards,
Santosh.

Error importing text file into SQL Server when last column is null

Hello all. Happy holidays!
I'm trying to import a text file into a SQL Server table, and I get the error below when it gets to a row (row 264) that has null in the last column. I'm guessing the null jumbles up the delimiters somehow. The nulls are not errors, and I need to import
them into the table with the rest of the rows. Any idea how I can do that?
Thanks!
[Flat File Source [1]] Error: Data conversion failed. The data conversion for column "XYZ" returned status value 2 and status text "The value could not be converted because of a potential loss of data.".
[Flat File Source [1]] Error: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "output column "XYZ" (178)" failed because error code 0xC0209084 occurred, and the error row disposition on "output column "XYZ"
(178)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
[Flat File Source [1]] Error: An error occurred while processing file "ABC.txt" on data row 264.
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Flat File Source" (1) returned error code 0xC0202092. The component returned a failure code when the pipeline engine called PrimeOutput().
The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
WeeLass

Hi WeeLass,
The error that” Data conversion failed. The data conversion for column "XYZ" returned status value 2 and status text "The value could not be converted because of a potential loss of data.".” is generally error message, and the error indicates
that there is data type mismatch issue between the input columns and the output columns.
Based on your description, the issue is that you trying to convert a column contains empty value from string to integer data type for the output column "XYZ" in Flat File Source [1]. Please note that we cannot type an empty value as integer data
type column value, so the error occurs.
To fix this issue, just as you did, we should convert the data type for the output column "XYZ" in Flat File Source [1] back to DT_WSTR or DT_STR, then use a derived column task to replace the current column (UBPKE542). But the expression should
be like below:
LEN(TRIM(UBPKE542)) > 0 ? (DT_I8)UBPKE542 : NULL(DT_I8)
In this way, the data type of the column in SQL table would be int, and the empty value would be replaced with NULL.
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Uploading Importing text file & crosstab display

 I want to upload a text tab delimited file into our db, currently we
are uploading it to a temp table in the db, do some validation checks and write
to a table when done. I have two questions:
 1) Is there a more efficient way of upload/importing flat files into
the db via forms, like loading data into a non db data block and working on the
data via loops rather than sql in a temp table.
 2) I want to present the data to the user(for verification) via a form
screen as they have read it in, the only way I can think of doing this, is
populating a temp table and then using a data block based on a stored procedure
that contains a dynamic pivot query package since I don't know the
number of columns that the file will contain. Data blocks can do either
vertical or horizontal alignment but not grid.
 File will take the format of: 
 col1 col2 col3
row1 data_r1c1 data_r1c2 data_r1c3
row2 data_r2c1 data_r2c2 data_r2c3
row3 data_r3c1 data_r3c2 data_r3c3
row4 data_r4c1 data_r4c2 data_r4c3
 
 Thank you in advance 

Thank you for your reply
1) It's a utility for users and so it has to be through forms
Presently I think it is better to read it in to a temp table then I can use sql for validation which would be faster than looping through blocks. But with this approach I'm just a little worried about Lost Updates e.g. what if someone is changing scores in the regular update screen while another person is trying to import them via the import utility.
2) I have to use a stored procedure because I don't know how many columns a user will want to load in, sometimes it could be 2,3 or 5 etc. So basically I am looking at a way of presenting the data from it's stored format in it's read in format i.e. file format
File format =
 col1 col2 col3 coln
row1 data_r1c1 data_r1c2 data_r1c3 data_r1cn
row2 data_r2c1 data_r2c2 data_r2c3 data_r2cn
row3 data_r3c1 data_r3c2 data_r3c3 data_r3cn
rown data_rnc1 data_rnc2 data_rnc3 data_rncn
It is stored in the temp table as
row1 col1 data_r1c1
row2 col1 data_r2c1
row1 col2 data_r1c2
row2 col2 data_r2c2
Example
 Test1 Test2 Test3 Test4
John 54 45 70 65
Jane 38 55 72 70
Stored in the temp and subsequently written to Student Score table as
Student Test Score
John Test1 54
John Test2 45
John Test3 70
John Test4 65
Jane Test1 38
Jane Test2 55
Jane Test3 72
Jane Test4 70

Importing text file (with file names) into Automator.. is it possible?

Hello all,
I have been working with Windows Batch files for my line of work. I have a couple of file names in a text file (a column), which I want to copy from one folder of one hdd to another folder on a different hdd. I have been trying to do this kind of work with a Mac. I already know how you copy and rename files in automator (which isn't difficult, of course) but you have to 'select' the files in the finder first (with get specified items).
But the only way i see that you can specify items is by selecting them... is there a way to import a text file with all the file names instead of selecting all the file names manually?
or is there an AppleScript alternative which I can use to import the text file (or just copy into applescript) and run before the query's of copying and renaming the files? I am kind of new to Apple programming.
The text file looks like this:
image1.jpg
image2.jpg
etc..
so there has to be a command to: 'goto' a specific folder as well.
Thanks in advance!

You can import text files, but if they are just names you will need an additional action to add the source folder path. A *Run AppleScript* action can be used, for example:
Tested workflow:
1) *Ask for Finder Items* {Type: files } -- choose the text file containing the names
2) *Combine Text Files* -- this gets the text file contents
3) *Filter Paragraphs* { return paragraphs that are not empty } -- skip blank lines
4) *Run AppleScript* -- copy and paste the following script:
<pre style="
font-family: Monaco, 'Courier New', Courier, monospace;
font-size: 10px;
font-weight: normal;
margin: 0px;
padding: 5px;
border: 1px solid #000000;
width: 680; height: 340px;
color: #000000;
background-color: #FFEE80;
overflow: auto;"
title="this text can be pasted into an Automator 'Run AppleScript' action">
on run {input, parameters} -- add folder path
add the specified folder path to a list of file names
input: a list of text items (the file names)
output: a list of file paths (aliases)
set output to {}
set SkippedItems to {} -- this will be a list of skipped items (errors)
set SourceFolder to (choose folder with prompt "Choose the folder containing the file names") as text -- this is the folder containing the names
repeat with AnItem in the input -- step through each name in the input
try
set AnItem to SourceFolder & AnItem -- add the prefix
set the end of the output to (AnItem as alias) -- test
on error number ErrorNumber -- oops
set ErrorNumber to (" (" & ErrorNumber as text) & ")" -- add the specific error number
set the end of SkippedItems to (AnItem as text) & ErrorNumber
end try
end repeat
ShowSkippedAlert for SkippedItems
return the output -- pass the result(s) to the next action
end run
to ShowSkippedAlert for SkippedItems
show an alert dialog for any items skipped, with the option to cancel the workflow
parameters - SkippedItems [list]: the items skipped
returns nothing
if SkippedItems is not {} then
set {AlertText, TheCount} to {"Error with AppleScript action", count SkippedItems}
if TheCount is greater than 1 then
set theMessage to (TheCount as text) & space & " items were skipped:"
else
set theMessage to "1 " & " item was skipped:"
end if
set {TempTID, AppleScript's text item delimiters} to {AppleScript's text item delimiters, return}
set {SkippedItems, AppleScript's text item delimiters} to {SkippedItems as text, TempTID}
if button returned of (display alert AlertText message (theMessage & return & SkippedItems) ¬
alternate button "Cancel" default button "OK") is "Cancel" then error number -128
end if
return
end ShowSkippedAlert
</pre>
5) *Copy Finder Items* { To: _your external drive_ }

Error while reading wsdl file

I created and deployed a BPEL process with a JMS adapter and DB adapter.
I have tested this and it works fine.
After a few days, I try to open the project and the BPEL process, and click on the DB
adapter and it throws an exception on the designer :
"Error while reading wsdl file ... (wsdl file name) NULL Exception"
This is hard to debug as the exception does not provide any info, NULL.
This has happened several times for my project. The next time the JMS adapter hit the
same exception while opening on designer. This one I notice happened after I imported
a new schema file (xsd) into the BPEL process.
Only way around that I have for this currently is to delete and recreate the adapters, which as time
consuming as I have to re-create and re-assign a lot of the activities.
Has anyone encountered this and is there a way to fix this without deleting/recreating the adapters ?
Thanks.

I experienced the same issue and found the cause and a workaround;
"Error while reading wsdl file …. Exception: null"
http://www.petervannes.nl/files/b7c08911ce3cde3677e2182bbc5f032a-47.php
Edited by: 944333 on Jul 3, 2012 10:24 PM

Getting error while uploading multiple files in sharepoint hosted app in 2013 with REST API

Hi All,
In one of my tasks, I was struck with one issue, that is "While uploading multiple files into custom list with REST API".
Iam trying to upload multiple files in library with REST calls for an APP development, my issue is if i wants to upload 4 image at once its storing only
3 image file and further giving "Conflict" error". Below is the attached screenshot of exact error.
Error within screenshot are : status Code : 409
status Text :conflict
For this operation i am uploading different files as an attachment to an list item, below is the code used for uploading multiple files.
my code is
function PerformUpload(listName, fileName, listItem, fileData)
var urlOfAttachment="";
// var itemId = listItem.get_id();
urlOfAttachment = appWebUrl + "/_api/web/lists/GetByTitle('" + listName + "')/items(" + listItem + ")/AttachmentFiles/add(FileName='" + fileName + "')"
// use the request executor (cross domain library) to perform the upload
var reqExecutor = new SP.RequestExecutor(appWebUrl);
reqExecutor.executeAsync({
url: urlOfAttachment,
method: "POST",
headers: {
"Accept": "application/json; odata=verbose",
"X-RequestDigest": digest
contentType: "application/json;odata=verbose",
binaryStringRequestBody: true,
body: fileData,
success: function (x, y, z) {
alert("Success!");
error: function (x, y, z) {
alert(z);

Hi,
THis is common issue if your file size exceeds
upload a document of size more than 1mb. worksss well for kb files.
https://social.technet.microsoft.com/Forums/office/en-US/b888ac78-eb4e-4653-b69d-1917c84cc777/getting-error-while-uploading-multiple-files-in-sharepoint-hosted-app-in-2013-with-rest-api?forum=sharepointdevelopment
or try the below method
https://social.technet.microsoft.com/Forums/office/en-US/40b0cb04-1fbb-4639-96f3-a95fe3bdbd78/upload-files-using-rest-api-in-sharepoint-2013?forum=sharepointdevelopment
Please remember to click 'Mark as Answer' on the answer if it helps you

Error while uploading .xml file for Customer/Vendor List for Italy

Hi All,
We are facing problem while uploading the .xml file in DMEE transaction for the new Customer/Vendor List for Italy.
We have followed the entire process given in the OSS Note(1090857).
We have SAP 4.6c and followed the below steps:
1. Created ID-FI-IT Development class
2. Added domains
3. Added Data elements
4. Tried to upload the given .xml file and got any error saying ".xml file could not be interpreted".
Also there is a .SAR file mentioned to upload if we receive any errors while uploading .xml file.
Tried uploading the .SAR file also. STill we are recieving the same Error.
Can any one of you help us out.
Thanks in Advance.
Ramesh

Ok, we upload .SAR file in this way:
1. unpack .SAR file with SAPCAR.EXE program. Yuo obtain 2 files
R492445.P9C and K492445.P9C
2. put K492445.P9C in directory \SAPMNT\TRANS\COFILES and put R492445.P9C in directory \SAPMNT\TRANS\DATA of your system (DEV, TST or PRD)
3. Use Tx STMS. If You want create DMEE tree in DEV system, go to DEV import queue. Choose menu Extras | Other requests | Add. Insert P9CK492445 in Transp. request field.
4. Import the request. This creates the DMEE tree. You don't need ti upload XML file after. You can see the DMEE tree created with Tx DMEE and inserting
Tree type UMS1
Format tree IT_CUST_VEN_LIST
5. after continue follow the note
I hope this help you
Roberto

Error while loading WSDL File in Eclipse

Hi Experts
We are getting the following Error while Loading WSDL File in Eclipse.
IWAB0399E Error in generating Java from WSDL: WSDLException (at /wsdl:definitions/wsdl:portType/wsp:Policy): faultCode=INVALID_WSDL: Encountered unexpected element 'Policy'.:
Please advice how to resolve it.
Regards
Prashant

It seems that your WSDL is not well defined, you need to test your wsdl via WS-I compliance in order to check if the wsdl is well created, you can do this via soapui, just create a new project, import the wsdl file or set the URL, left click in the project and select check WS-I compliance, this tool will test your wsdl and gives you a detailed report of what might be the problem.

Error while creating control file

hi
i am getting following error while creating controll file
QL> shutdown
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup nomount
ORACLE instance started.
Total System Global Area 629145600 bytes
Fixed Size                  1250548 bytes
Variable Size             171969292 bytes
Database Buffers          452984832 bytes
Redo Buffers                2940928 bytes
SQL> @c:\study\rose\c.sql
SP2-0042: unknown command "DATAFILE" - rest of line ignored.
SP2-0734: unknown command beginning "'C:\ORACLE..." - rest of line ignored.
SP2-0734: unknown command beginning "'C:\ORACLE..." - rest of line ignored.
SP2-0734: unknown command beginning "CHARACTER ..." - rest of line ignored.
SP2-0044: For a list of known commands enter HELP
and to leave enter EXIT.
1 CREATE CONTROLFILE SET DATABASE "ROSE" RESETLOGS froce logging NOARCHIVELOG
2      MAXLOGFILES 32
3      MAXLOGMEMBERS 2
4      MAXDATAFILES 32
5      MAXINSTANCES 16
6      MAXLOGHISTORY 1752
7 LOGFILE
8 GROUP 1 'C:\oracle\product\10.2.0\oradata\rose\LOG1ROSE.ORA' SIZE 50M,
9    GROUP 2 'C:\oracle\product\10.2.0\oradata\rose\LOG2ROSE.ORA' SIZE 50M,
10   GROUP 3 'C:\oracle\product\10.2.0\oradata\rose\LOG06.LOG' SIZE 25M,
11*   GROUP 4 'C:\oracle\product\10.2.0\oradata\rose\LOG07.LOG' SIZE 25M
SQL>

CHETAN YADAV wrote:
hi
i am getting following error while creating controll file
QL> shutdown
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup nomount
ORACLE instance started.
Total System Global Area 629145600 bytes
Fixed Size                  1250548 bytes
Variable Size             171969292 bytes
Database Buffers          452984832 bytes
Redo Buffers                2940928 bytes
SQL> @c:\study\rose\c.sqlWe can't debug what we can't see. And what we can't see is the contents of "c:\study\rose\c.sql".
SP2-0042: unknown command "DATAFILE" - rest of line ignored.
SP2-0734: unknown command beginning "'C:\ORACLE..." - rest of line ignored.
SP2-0734: unknown command beginning "'C:\ORACLE..." - rest of line ignored.
SP2-0734: unknown command beginning "CHARACTER ..." - rest of line ignored.
SP2-0044: For a list of known commands enter HELP
and to leave enter EXIT.
1 CREATE CONTROLFILE SET DATABASE "ROSE" RESETLOGS froce logging NOARCHIVELOG
2 MAXLOGFILES 32
3 MAXLOGMEMBERS 2
4 MAXDATAFILES 32
5 MAXINSTANCES 16
6 MAXLOGHISTORY 1752
7 LOGFILE
8 GROUP 1 'C:\oracle\product\10.2.0\oradata\rose\LOG1ROSE.ORA' SIZE 50M,
9 GROUP 2 'C:\oracle\product\10.2.0\oradata\rose\LOG2ROSE.ORA' SIZE 50M,
10 GROUP 3 'C:\oracle\product\10.2.0\oradata\rose\LOG06.LOG' SIZE 25M,
11* GROUP 4 'C:\oracle\product\10.2.0\oradata\rose\LOG07.LOG' SIZE 25M
SQL>

Error while converting class file to exp and jca file

error while converting *.class file to *.exp and *.jca file
=====================================================================================================================
linux-y60u:/home/admin/java_card_kit-2_2_1/samples/src # converter -exportpath "/home/admin/java_card_kit-2_2_1/lib/" com/sun/javacard/samples/HelloWorld 0x00:0x01:0x02:0x03:0x04:0x05:0x06:0x07:0x0b 1.0 -v -applet 0x00:0x01:0x02:0x03:0x04:0x05:0x06:0x07:0x0b:0x01 Identity
Java Card 2.2.1 Class File Converter, Version 1.3
Copyright 2003 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms.
parsing /home/admin/java_card_kit-2_2_1/samples/src/com/sun/javacard/samples/HelloWorld/HelloWorld.class
parsing /home/admin/java_card_kit-2_2_1/samples/src/com/sun/javacard/samples/HelloWorld/Identity.class
error: com.sun.javacard.samples.HelloWorld.HelloWorld: unsupported class file format of version 50.0.
error: com.sun.javacard.samples.HelloWorld.Identity: unsupported class file format of version 50.0.
conversion completed with 2 errors and 0 warnings.
=====================================================================================================================

i compile a file javacard use this command:
===
javac -source 1.3 -target 1.1 -g -classpath ./classes:../lib/api.jar:../lib/installer.jar src/com/sun/javacard/samples/Identity/Identity.java
===
and try to convert this class use this command
===
/home/xnuxerx/admin/java_card_kit-2_2_1/bin/converter -exportpath "/home/xnuxerx/admin/java_card_kit-2_2_1/lib/" com/sun/javacard/samples/Identity 0x00:0x01:0x02:0x03:0x04:0x05:0x06:0x07:0x0b 1.0 -v -applet 0x00:0x01:0x02:0x03:0x04:0x05:0x06:0x07:0x0b:0x01 Identity
===
result convert:
===
Java Card 2.2.1 Class File Converter, Version 1.3
Copyright 2003 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms.
parsing /home/xnuxerx/admin/java_card_kit-2_2_1/samples/classes/com/sun/javacard/samples/Identity/Identity.class
converting com.sun.javacard.samples.Identity.Identity
error: export file framework.exp of package javacard.framework not found.
conversion completed with 1 errors and 0 warnings.
===
why ??
please your comment for this problem.
thank 4 all.

Error while importing text file to Power Pivot via Table Import Wizard

Similar Messages

Maybe you are looking for