Error while loading Member list

Hi,
I'm using Financial Management 9.3.1.
When opening a Member List file (*.lst) I'm getting the following error:
Unexpected error: 80042380 occurred.
However, the file seems to open and, when clicking on "Explore Data", I get the following error message:
Error occurred while accessing the safe array.
Any help will be appreciated.

I just had the same error - I tracked it down to an error in the structure of a Select...Case construct in the code in the .lst file. With this sort of structural error in the script, there was no helpful error message in the HFM ErrorLogViewer - so I isolated it by commenting out all the newly added code and gradually uncommenting it until I recreated and therefore spotted the problem.
Hope that helps
Nigel Dahl

Similar Messages

Error while Loading Budgets Using AMG

Error while Loading Budgets Using AMG
Dear All,
I am trying to load Budgets into ORACLE Projects using AMG API's..
I have developed PL/SQL which uses below procedures of pa_budget_pub package.
init_budget;
load_budget_line;
execute_draft_budget;
baseline_budget;
Procedure execute_create_draft_budget fails with following error message.
error message: Please enter a valid product code for this project.
error message: You entered an invalid API parameter.Please enter valid parameter and try again. Parameter Name: Resource List Parameter Value: 1446
error message: Project: AC044. Please specify a valid resource list.
error message: Project: AC044. Please specify a valid resource list.
Could somebody explain me how to resolve this error message and load the budget lines.
Thanks in Advance.
Afsal Basha.

What I'm saying is, verify the column name. Dont post if not possible.
Example follows, with one table intentionally "hidden".
SQL> create table "tEsT" ("MaxNumber" float, "MaxnumbeR" number);
SQL> select table_name,column_name from user_tab_columns where table_name like 't%';
TABLE_NAME                     COLUMN_NAME
tEsT                           MaxNumber
tEsT                           MaxnumbeR
teST                           iD
teST                           MaxNumberHth,
Fredrik

Svcadm: error while loading shared libraries: libz.so.1: cannot open shared

Ops center 12c installation last stage we are getting below error :
INFO: starting new satellite SMF services
satadm: Enable HTML redirect
satadm: Disabling application/scn/ec-server-splashpage
/opt/sun/xvmoc/bin/svcadm: error while loading shared libraries: libz.so.1: cannot open shared object file: No such file or directory
satadm: ERROR: application/scn/ec-server-splashpage failed to stop
satadm: Starting Enterprise Controller with SMFlite...
svcadm: error while loading shared libraries: libz.so.1: cannot open shared object file: No such file or directory
satadm: ERROR: Error enabling Enterprise Controller run-time milestone svc:/application/scn/satellite-enable:default (rc=127)
Error: starting satellite services
Command: /opt/sun/xvmoc/bin/satadm start -v -w
Exit code: 1
Output:
Please fix the problem and then try this step again.
For a full log of the failed install see the file: /var/tmp/installer.log.14112.
t. Try this step again (correct the failure before proceeding)
x. Exit

Hi Valentin
The copy error occurs when you try to copy the files to the main OS that has allocated the VM ?
Because another option is to get those files toward the VM across and ftp server. You could use
an ftp server installed in the main machine or in the network where you are connected o inclusive from
your mail if you have connection to internet.
Joel Perez
Oracle Ace Member
DBA Oracle

Error while loading shared libraries: libtasn1.so.3: cannot open share

Hello,
I have done an update to the system today and now I see the following error:
emacs: error while loading shared libraries: libtasn1.so.3: cannot open shared object file: No such file or directory
same happens if I try to open epiphany.
I have:
extra/libtasn1 3.0-1 [installed]
I tried to reinstall it, but there is no effect. Any idea what I can do to fix this?
Thanks!

looking at the file list, libtasn1 3.0-1 comes with libtasn1.so.6. The packages that depend on it will need to be rebuilt for the soname bump. If you're sure that you're completely up to date, file a bug report. If you got the versions of the programs you're using from the AUR, rebuild them yourself.
Last edited by Scimmia (2012-11-05 14:34:01)

Error while loading shared libraries: libjvm.so

Hi,
Hopefully, this is the right list for this problem. I am working on a computer that has Linux 2.6.20-1.2952.fc6. I am trying to deploy a program to a Sun SPOT using over-the-air functionality; however, I get the following message:
-pre-suite:
-do-suite:
[exec] /usr/java/SunSPOT/sdk/bin/squawk: error while loading shared libraries: libjvm.so: cannot open shared object file: No such file or directory
BUILD FAILED
/usr/java/SunSPOT/sdk/ant/suite.xml:38: exec returned: 127When I try to locate this file, I can see it in in the following locations:
/usr/java/jdk1.6.0_02/jre/lib/i386/client/libjvm.so
/usr/java/jdk1.6.0_02/jre/lib/i386/server/libjvm.so
How can I resolve this error?
Thanks,
Daniel

make sure to include one of those two directories in your LD_LIBRARY_PATH environment variable. Probably the client directory one. And only the directoy (i.e. that path minus the libjvm.so part).

Error while loading data

hi guys
i got an error while loading infoobject atrributes
i created characteristic info object "equipment" with Master data and text.
when i loaded text it was working fine but the problem happened when i start
loading attributes data.
error code is as given below
Check Load from InfoSource D92_EQUIP , Packet infpackage for equipment -attrib
Please execute the mail for additional information.
Data records were selected in the PSA
Diagnosis
Data records were marked as incorrect in the PSA.
System response
If error messages exist for the data records, the corresponding data packets were not updated using the PSA.
Procedure
Go into the PSA maintenance for the request and read the logged messages.
You find the relevant messages for each record in the PSA table by double-clicking on the status of the record.
Where necessary, edit the incorrect records or remove the error in another way.
Post the incorrect data packets manually.
Note that you are only permitted to edit and manually update the request if it is not contained in the request list in the InfoCube (see InfoCube administration). Where necessary, first delete it from the InfoCube.
any advice ???its says problem with data records..but i couldnt find any
regards
abhi
Message was edited by:
Abhilash Muraleedharan

Hi Abhilash,
You can use the preview functionality in the external page to see if the reords are being pulled properly or not.
If not then there is some problem with the file which you need to fix. Or might be the setting you have done in selecting the delimiter in BW or any setting. Also check your routines if you are using any.
If the file is being pulled correctly try seeing the error message under the details tab in the monitor screen. That will give you an idea why the load is failing.
Hope that helps.
regards.

Bex Report Designer: Error while loading metadata

hi experts,
I am working with BI7 Bex Report Designer and we are using SP9. when i tried to load the Query in Report Designer its giving below error.
Error while loading metadata.
Check the Query and portal settings.(but the query is working fine in Analyzer).
and its giving message class RSBOLAP, message number 018 and Description is java system error: incoming call is not authorized.
when i double click the error its giving below error details.
Diagnosis
An error occurred in the BI components on the SAP J2EE Engine.
System Response
Procedure
Contact your system administrator to have the error analyzed in detail.
Procedure for System Administration
Start the Visual Administrator, log on to the SAP J2EE Engine and choose "<J2EE_SID>" ->"Server" -> "Services" -> "Log Viewer".
The file "defaultTrace.trc" includes detailed information about the error that occurred. In Windows, you can find this file in the Log Viewer under "Cluster <computer name>" -> "Server <server number>" -> "<drive>:\usr\sap\<SID>\JC<INSTANCE>\j2ee\cluster\server<NUMBER>\log". ". In Unix, the file is located under "/usr/sap/<SID>/JC<INSTANCE>/j2ee/cluster/server<NUMBER>/log".
If the file does not include enough detail about the error, you can increase the log level to obtain more information. To do this, choose "<J2EE_SID>" -> "Server" -> "Services" -> "Log Configurator". On the "Locations" tab page, choose "com" -> "sap" -> "ip" -> "bi" -> "webapplications". Using the selection list on the right side of the screen, you can increase the log level, whereby "DEBUG" represents the log level with the most information. You can save your settings by choosing the "Save" icon. The change to the log level is active immediately. Once you have successfully analyzed the error, you should set the log level back to its default value using the appropriate pushbutton; continuous writing to the log file negatively affects the overall performance of the system.
could you plz suggest me how to rectify the problem.
regards
vadlamudi

Hi vadlamudi
The error message RSBOLAP 018 means, that the ABAP stack can't communicate with the Java Stack.
1) Please ensure, that the user, used for the Report Designer, is valid in the Portal too. Depending on the user management setup this means that there either needs to be the same user or an assigned user in the Portal.
2) In case the user is valid, it means a basic misconfiguration according to note 937697. In this case please run the Support Desk Tool and ensure, that all checks are green. Please ensure, that the latest version of the Support Desk Tool is used.
Regards,
Janine

Error while loading the data from PSA to Data Target

Hi to all,
     I'm spacing some error while loading the data to data target.
Error : Record 1 :Value 'Kuldeep Puri Milan Joshi ' (hex. '004B0075006C0064006500650070002000500075007200690
Details:
Requests (messages): Everything OK
Extraction (messages): Everything OK
Transfer (IDocs and TRFC): Errors occurred
      Request IDoc : Application document posted
      Info IDoc 2 : Application document posted
      Info IDoc 1 : Application document posted
      Info IDoc 4 : Application document posted
      Info IDoc 3 : Application document posted
      Data Package 1 : arrived in BW ; Processing : Data records for package 1 selected in PSA - 1 er
Processing (data packet): Errors occurred
      Update PSA ( 2462 Records posted ) : No errors
      Transfer Rules ( 2462 -> 2462 Records ) : No errors
      Update rules ( 2462 -> 2462 Records ) : No errors
      Update ( 0 new / 0 changed ) : Errors occurred
      Processing end : Errors occurred
I'm totally new to this issue. please help to solve this error.
Regards,
Saran

Hi,
I think you are facing an invalid character issue.
This issue can be resolved by correcting the error records in PSA and updating it into the target. For that the first step should be to identify if all the records are there in PSA. You can find out this from checking the Details tab in RSMO, Job log , PSA > sorting records based on status,etc. Once its confirmed force the request to red and delete the particular request from the target cube. Then go to PSA and edit the incorrect records (correcting or blanking out the invalid entries for particular field InfoObject for the incorrect record) and save it. Once all the incorrect records are edited go to RSA1>PSA find the particular request and update to target manually (right click on PSA request > Start update immediately).
I will add the step by step procedure to edit PSA data and update into target (request based).
In your case the error message says Error : Record 1 :Value 'Kuldeep Puri Milan Joshi '. You just need to conver this to Capital letter in PSA and reload.
Edit the field to KULDEEP PURI MILAN JOSHI in PSA and push it to target.
Identifying incorrect records.
System wont show all the incorrect records at the first time itself. You need to search the PSA table manually to find all the incorrect records.
1. First see RSMO > Details > Expand upate rules / processing tabs and you will find some of the error records.
2. Then you can go to PSA and filter using the status of records. Filter all the red requests. This may also wont show the entire incorrect records.
3. Then you can go to PSA and filter using the incorrect records based on the particular field.
4. If this also doesnt work out go to PSA and sort (not filter) the records based on the particular field with incorrect values and it will show all the records. Note down the record numbers and then edit them one by one.
If you want to confirm find the PSA table and search manually."
Also Run the report RS_ERRORLOG_EXAMPLE,By this report you can display all incorrected records of the data & you can also find whether the error occured in PSA or in TRANSFER RULES.
Steps to resolve this
1. Force the request to red in RSMO > Status tab.
2. Delete the request from target.
3. Come to RSMO > top right you can see PSA maintenace button > click and go to PSA .
4.Edit the record
5. Save PSA data.
6. Got to RSA15 > Search by request name > Right click > update the request from PSA to target.
Refer how to Modify PSA Data
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40890eda-1b99-2a10-2d8b-a18b9108fc38
This should solve your problem for now.
As a long term you can apply some user exit in source system side or change your update rules to ensure that this field is getting blanked out before getting loaded in cube or add that particular char to permitted character list in BW.
RSKC --> type ALL_CAPITAL --> F8 (Execute)
OR
Go to SE38 and execute the program RSKC_ALLOWED_CHAR_MAINTAIN and give ALL_CAPITAL or the char you want to add.
Check the table RSALLOWEDCHAR. It should contain ALL_CAPITAL or the char you have entered.
Refer
/people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
/people/sap.user72/blog/2006/07/08/invalid-characters-in-sap-bw-3x-myths-and-reality-part-1
/people/aaron.wang3/blog/2007/09/03/steps-of-including-one-special-characters-into-permitted-ones-in-bi
http://help.sap.com/saphelp_nw04/helpdata/en/64/e90da7a60f11d2a97100a0c9449261/frameset.htm
For adding Other characters
OSS note #173241 Allowed characters in the BW System
Thanks,
JituK
Edited by: Jitu Krishna on Mar 22, 2008 1:52 PM

Error while loading data on to the cube : Incompatible rule file.

Hi,
I am trying to load data on to essbase cube from a data file. I have a rule file on the cube already, and I am getting the following error while loading the data. Is there any problem with the rules file?
SEVERE: Cannot begin data load. Essbase Error(1019058): Incompatible rule file. Duplicate member name rule file is used against unique name database.
com.essbase.api.base.EssException: Cannot begin data load. Essbase Error(1019058): Incompatible rule file. Duplicate member name rule file is used against unique name database.
     at com.essbase.server.framework.EssOrbPluginDirect.ex_olap(Unknown Source)
     at com.essbase.server.framework.EssOrbPluginDirect.essMainBeginDataload(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin._invokeMainMethod(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin._invokeMethod2(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin._invokeMethod(Unknown Source)
     at com.essbase.server.framework.EssOrbPluginDirect._invokeProtected(Unknown Source)
     at com.essbase.api.session.EssOrbPluginEmbedded.invokeMethod(Unknown Source)
     at com.essbase.api.session.EssOrbPluginEmbedded.invokeMethod(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin.essMainBeginDataload(Unknown Source)
     at com.essbase.api.datasource.EssCube.beginDataload(Unknown Source)
     at grid.BudgetDataLoad.main(BudgetDataLoad.java:85)
Error: Cannot begin data load. Essbase Error(1019058): Incompatible rule file. Duplicate member name rule file is used against unique name database.
Feb 7, 2012 3:13:37 PM com.hyperion.dsf.server.framework.BaseLogger writeException
SEVERE: Cannot Load buffer term. Essbase Error(1270040): Data load buffer [3] does not exist
com.essbase.api.base.EssException: Cannot Load buffer term. Essbase Error(1270040): Data load buffer [3] does not exist
     at com.essbase.server.framework.EssOrbPluginDirect.ex_olap(Unknown Source)
     at com.essbase.server.framework.EssOrbPluginDirect.essMainLoadBufferTerm(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin._invokeMainMethod(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin._invokeMethod2(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin._invokeMethod(Unknown Source)
     at com.essbase.server.framework.EssOrbPluginDirect._invokeProtected(Unknown Source)
     at com.essbase.api.session.EssOrbPluginEmbedded.invokeMethod(Unknown Source)
     at com.essbase.api.session.EssOrbPluginEmbedded.invokeMethod(Unknown Source)
     at com.essbase.api.session.EssOrbPlugin.essMainLoadBufferTerm(Unknown Source)
     at com.essbase.api.datasource.EssCube.loadBufferTerm(Unknown Source)
     at grid.BudgetDataLoad.main(BudgetDataLoad.java:114)
Error: Cannot Load buffer term. Essbase Error(1270040): Data load buffer [3] does not exist
Thanks,
Santhosh

" Incompatible rule file. Duplicate member name rule file is used against unique name database."
I am just guessing here as I have never used the duplicate name functionality in Essbase, nor do I remember which versions it was in. However with that said I think your answer is in your error message.
Just guessing again.... It appears that your rule file is set to allow duplicate member names while your database is not. With that information in hand (given to you in the error message) I would start to explore that.

Error while loading javaGUI from BSP via Applet

Hello Folks,
i saw an interesting Thread by Thomas Jung (SAP) how to starting a R/3 Transaction via javaGUI from a Business Server Page. I did the same steps but get an Java Error while loading the applet. Can anyone help me?
The error listed in the JavaConsole is:
java.security.AccessControlException: access denied (java.util.PropertyPermission com.sap.platin.productType read)
     at java.security.AccessControlContext.checkPermission(Unknown Source)
     at java.security.AccessController.checkPermission(Unknown Source)
     at java.lang.SecurityManager.checkPermission(Unknown Source)
     at java.lang.SecurityManager.checkPropertyAccess(Unknown Source)
     at java.lang.System.getProperty(Unknown Source)
     at com.sap.platin.micro.Version.guessVersionType(Version.java:230)
     at com.sap.platin.GuiAppletBase2.findProductType(GuiAppletBase2.java:324)
     at com.sap.platin.GuiApplet2.getProductType(GuiApplet2.java:18)
     at com.sap.platin.GuiAppletBase2.<init>(GuiAppletBase2.java:54)
     at com.sap.platin.GuiApplet2.<init>(GuiApplet2.java:14)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
     at java.lang.reflect.Constructor.newInstance(Unknown Source)
     at java.lang.Class.newInstance0(Unknown Source)
     at java.lang.Class.newInstance(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
All Jar-Libraries are imported in the Application Mime-Repository...and regardless the JavaGUI is installed on my local host or not, i get the same error...
Thanks in advance for your help,
Christian Kremer

Hi,
You can check the below forums.
DTP with error RSBK257
- Jaimin

There was an error while loading the message. Please try again later. get this when trying to open emails

from today only when i try to open my emails i get the following message
There was an error while loading the message. Please try again later.
I did a restore earlier and not worked since then i ues Aol but have never had a problem before someone please help

Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!

Error while loading shared libraries: librt.so.1: cannot open shared object

error while loading shared libraries: librt.so.1: cannot open shared object
I cant run my apache server v2.2.3.
Can someone help me?
thanks in advance

That could be an accessibility issue. Check the user with whom you installed Apache server. Check the user has permissions to access the libraries.
-Mahendra.

Error while loading shared libraries

error while loading shared libraries
I just installed 10g . on a Fedora Core 4 machine and after a reboot I tried to run sqlplus and got this type of error. I also got the same error when trying to lsnrctl status ...
[oracle@localhost ~]$ sqlplus
sqlplus: error while loading shared libraries: /apps/oracle/product/10g/lib/libnnz10.so: cannot restore segment prot after reloc: Permission denied
[oracle@localhost ~]$
declare -x CLASSPATH="/apps/oracle/product/10g/JRE:/apps/oracle/product/10g/jlib:/apps/oracle/product/10g/rdbms/jlib"
declare -x EDITOR="vi"
declare -x G_BROKEN_FILENAMES="1"
declare -x HISTSIZE="1000"
declare -x HOME="/home/oracle"
declare -x HOSTNAME="localhost.localdomain"
declare -x INPUTRC="/etc/inputrc"
declare -x KDEDIR="/usr"
declare -x LANG="en_US.UTF-8"
declare -x LD_LIBRARY_PATH="/apps/oracle/product/10g/lib:/lib:/usr/lib"
declare -x LESSOPEN="|/usr/bin/lesspipe.sh %s"
declare -x LOGNAME="oracle"
declare -x LS_COLORS="no=00:fi=00:di=00;34:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=00;32:*.cmd=00;32:*.exe=00;32:*.com=00;32:*.btm=00;32:*.bat=00;32:*.sh=00;32:*.csh=00;32:*.tar=00;31:*.tgz=00;31:*.arj=00;31:*.taz=00;31:*.lzh=00;31:*.zip=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:*.bz=00;31:*.tz=00;31:*.rpm=00;31:*.cpio=00;31:*.jpg=00;35:*.gif=00;35:*.bmp=00;35:*.xbm=00;35:*.xpm=00;35:*.png=00;35:*.tif=00;35:"
declare -x MAIL="/var/spool/mail/oracle"
declare -x OLDPWD="/home/oracle"
declare -x ORACLE_BASE="/apps/oracle"
declare -x ORACLE_HOME="/apps/oracle/product/10g"
declare -x ORACLE_SID="TST2"
declare -x ORACLE_TERM="xterm"
declare -x PATH="/apps/oracle/product/10g/bin:/usr/sbin:/apps/oracle/product/10g/bin:/usr/sbin:/apps/oracle/product/10g/bin:/usr/sbin:/apps/oracle/product/10g/bin:/usr/sbin:/apps/oracle/product/10g/bin:/usr/sbin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin"
declare -x PWD="/home/oracle"
declare -x QTDIR="/usr/lib/qt-3.3"
declare -x SHELL="/bin/bash"
declare -x SHLVL="1"
declare -x SSH_ASKPASS="/usr/libexec/openssh/gnome-ssh-askpass"
declare -x SSH_CLIENT="::ffff:192.168.1.152 2503 22"
declare -x SSH_CONNECTION="::ffff:192.168.1.152 2503 ::ffff:192.168.121.8 22"
declare -x SSH_TTY="/dev/pts/2"
declare -x TERM="xterm"
declare -x TMP="/home/oracle/tmp"
declare -x TMPDIR="/home/oracle/tmp"
declare -x USER="oracle"
[oracle@localhost ~]$
Any input would be highly appreciated.
Thanks
Ambrosius

yap. got it..
disabled SELinux then run it.
I didn't get any errors and have it up and running. Here is what I did:
Full Fedora Core 4 install with SELinux enabled (default settings). Then, after install, disable SELinux in the /etc/selinux/config file.
Thanks
Ambrosius

Error While loading a image from database

Purpose
Error While loading the Image from the database
ORA-06502: PL/SQL : numeric or value error:Character string buffer too small
ORA-06512: at "Sys.HTP" ,line 1480
Requirement:
I am developing the web pages using PSP(Pl/sql Serverpages) . I have a requirement to show a image in the webpage. I got the following procedures from the oracle website.
I have created the following table to store the images
create table DEMO
ID INTEGER not null,
THEBLOB BLOB
And I also uploaded the Images. Now I am try to get a image from the table using the following procedure .But I am getting the error message line 25( htp.prn( utl_raw.cast_to_varchar2( l_raw ) );) .at it throws the following error messages
ORA-06502: PL/SQL : numeric or value error:Character string buffer too small
ORA-06512: at "Sys.HTP" ,line 1480
Procedure that I used to get the image
create or replace package body image_get
as
procedure gif( p_id in demo.id%type )
is
l_lob blob;
l_amt number default 30;
l_off number default 1;
l_raw raw(4096);
begin
select theBlob into l_lob
from demo
where id = p_id;
-- make sure to change this for your type!
owa_util.mime_header( 'image/gif' );
begin
loop
dbms_lob.read( l_lob, l_amt, l_off, l_raw );
-- it is vital to use htp.PRN to avoid
-- spurious line feeds getting added to your
-- document
htp.prn( utl_raw.cast_to_varchar2( l_raw ) );
l_off := l_off+l_amt;
l_amt := 4096;
end loop;
exception
when no_data_found then
NULL;
end;
end;
end;
What I have to do to correct this problem. This demo procedure and table that I am downloaded from oracle. Some where I made a mistake. any help??
Thanks,
Nats

Hi Satish,
I have set the raw value as 3600 but still its gives the same error only. When I debug the procedure its throwing the error stack in
SYS.htp.prn procedure of the following line of code
if (rows_in < pack_after) then
while ((len - loc) >= HTBUF_LEN)
loop
rows_in := rows_in + 1;
htbuf(rows_in) := substr(cbuf, loc + 1, HTBUF_LEN);
loc := loc + HTBUF_LEN;
end loop;
if (loc < len)
then
rows_in := rows_in + 1;
htbuf(rows_in) := substr(cbuf, loc + 1);
end if;
return;
end if;
Its a system procedure. I don't no how to proceed .. I am really stucked on this....is their any other method to take picture from the database and displayed in the web page.....???? any idea..../suggesstion??
Thanks for your help!!!.

Error while loading AS400 table

Posted: 14 May 2014 08:11
Post subject: Error while loading AS400 table
Hi,
I was trying to load an AS400 table using a flat file as source. The table and flat file has a single field only. I'm getting the error "<SQLExecute>: <[IBM][System i Access ODBC Driver]Error in assignment.>"
The screenshot of the full error message is attached. can someone please help me to resolve this.
Thanks,
david

Posted: 14 May 2014 08:11
Post subject: Error while loading AS400 table
Hi,
I was trying to load an AS400 table using a flat file as source. The table and flat file has a single field only. I'm getting the error "<SQLExecute>: <[IBM][System i Access ODBC Driver]Error in assignment.>"
The screenshot of the full error message is attached. can someone please help me to resolve this.
Thanks,
david

Error while loading Member list

Similar Messages

Maybe you are looking for