Error while running Internal Order Settlement (KO88)

Hi,
We are in ECC 6.  We are facing an error while settling one internal order using T.Code KO88.
The error message says :
Execute amount settlement up to and including settlement period 001 2009 first
Message KD262
We have already settled the internal order upto previous month. But, we are unable to settle the order for the current month.
Any suggestion please.
Regards,
Ganesan

In production Order maintain Settlement type as Full Settlement.
In CO01 Create production Order or CO02 Change production order go to
Header -
> Settlement Rule
Maintain Category, Receiver, Percentage, FUL (as settlement type)
Change settlement type to FUL if it is PER.
PER Settlement Type - Only settles the cost incurred on the posting period
FUL Settlment Type - Settles all the cost incurred after the previous costing run

Similar Messages

  • Error while doing investment order settlement

    Dear all,
    My client has not settled certain line items in the
    previous year for some Investment orders. Now when he
    is carrying out settlement (KO88), for the current
    period, he is getting error message " AW 624"(first
    settle items from the previous year in the previous
    year). How can he settle previous years item in the
    current year since FI & CO periods are all closed for
    prev. year.
    The settlement rule is AUC in this case.
    Thanks in adv.
    Vijaya

    Hi
    As per note 82514:
    If you simply want to settle the unsettled values from the previous year    
    in the current year, proceed as described in Notes 425601 and 819197. If    
    settlement for the previous year is no longer possible, due to concluded    
    fiscal years in FI and CO, or the reporting problems described above        
    have to be avoided due to settlement in the previous year, settlement in    
    the current fiscal year is then particularly necessary.                     
    As far as I know, if note 425601 is fully implemented, AW624 should        
    become editable in OBA5. Could you please check if the coding has been     
    correctly applied? Especially below steps need to be done manually:                                                                               
    As a prerequisite for Transaction OBA5, you must first of all implement    
    the program corrections of note 425601 and insert  the following           
    table entries :                                                                               
    o  As of Release 4.6: Use Transaction SM31 to include application      
           area 'AW' into table V_T100SA.                                                                               
    o  Start Transaction SM31 to include the following entry in table      
           T100S:                                                              
           'Application area    MsgNo    Allowed      Standard   Switch off'   
            AW                  624      EWI          E           'X'                                                                               
    Regards
    Javier Reviriego

  • Error while doing production order settlement

    Hi frds,
    When I am doing the production order settlement, I am getting the following error
    " There are no accrued amounts; settlement is not possible".
    The status of the order is TECO CNF DLV PRC BASC BCRQ GMPS MANC.
    Rajnish

    Rajnish,
    Please check if there is cost balance for the order, to me it looks like the order is already settled. In the order display mode (CO03) menu bar Goto->Costs->Balance.
    If balance exists then the problem may be related to the settlement period used in the Intial screen of transaction KO88. Please check the cost incured period and use the same period as settlement period.
    Regards,
    Prasobh

  • Asset value date in Internal order settlement ko88

    Hi.
    I have posted some expenses to the internal order. I m trying to settle it to AUC with tcode KO88.
    In the selection screen of ko88 i gave asset value date as 15.07.2011 but system is posting with month end date only as 31.07.2011.
    I read the sap note 98496. In that its mentioned that the asset value date given in settlement parameters will override the asset value date given in the selection screen of ko88.
    I tried to update the AUC asset value date in KO02 where we give settlement rules but i couldnt find any field there.
    Where do i update the AUC asset value date in settlement parameters. Can anyone provide me the tcode and the field where i update this asset value date.
    Regards,
    Padmavathi

    Hi
    You can the same in transaction code KO02 
    1. Click on 'Settlement Rule'
    2 Select 'Goto' in toll bar
    3.Select 'Settlement Parameter F8"
    4 there you will get" Asset value date"
    Table  Name" COBRA" field "BZDAT"
    Hope this will helpful for you
    Regards
    Praveen P C

  • Error while creating internal order

    Hi,
    I have defined an Order type for budgeting purpose, so that statistical internal orders be created under that order type.
    This is required for budget controlling.
    Now I am not able to create internal order in Ko01.
    I am getting the below error message:
    Internal Orders: Profit Center  not allowed
    Message no. Z1052
    Please guide me how to create statistical internal order for new order type defined.
    Thanks & Regards,
    Divya

    hi
    goto oke5 actovate u r contorling area for year base  and also asiisgm dummy profit center., u can make settings in this path,
    sap img- controling-profit center accounting-besic settings -contoling area setting-maintain controling area setting, this sceern u activate year wise ,a nd also assign profit center.
    and u dont define profit center goto same path -masterdata- prifitcent - define profit center.
    first u settings completed,
    other wise u contact ur fico consultant
      regards
    sankar.

  • Error while running sales order

    HI ...ALL ..
    In va01 while creating sales order for particular sales area , one error message is coming that material is not maintained in particular storage location . It is actually a scrap material .And in its material master view storage location is not maintained ....
    Pls advice ...

    Hello Sundar,
    Please try creating the storage location view in MM02 and also check if th4e storage location is added under MMSC for that particular material...
    Check whether material is extended in that SLOC or not ?
    Hope this helps...
    Robin.

  • Error while running Process Order API to import orders - URGENT HELP NEEDED

    Hi all,
    I'm stuck with order import using OE_ORDER_PUB.PROCESS_ORDER api. Wanted to import a simple order in Vision database using the process order api. Figured out the right data to use, inserted into Headers and Lines Iface All tables. When calling the OE_ORDER_PUB.PROCESS_ORDER api, it is throwing this error:
    "Header ID does not exist on this record or does not match ID specified on header record. You require a valid header ID if the operation is Create."
    But when I validate the same record using the CORRECTIONS form in Order Import GUI, the order is successfully validated. Also the order is imported when I click the IMPORT button.
    I understand that HEADER_ID column is not required for creating a new order, but not sure why it is erroring. Here is the data I'm using:
    Insert into oe_headers_iface_all
    (org_id, order_type_id, order_source_id, orig_sys_document_ref, ordered_date, request_date,
    sold_from_org_id, sold_to_org_id, ship_from_org_id, ship_to_org_id, invoice_to_org_id,
    CREATED_BY,CREATION_DATE,LAST_UPDATED_BY,LAST_UPDATE_DATE,LAST_UPDATE_LOGIN,OPERATION_CODE)
    values (204, 1430, 1046, '101040', sysdate, sysdate, 204, 1004, 606, 1018, 1017, 0, sysdate, 0, sysdate, 0, 'CREATE');
    Insert into oe_lines_iface_all
    ("ORDER_SOURCE_ID","ORIG_SYS_DOCUMENT_REF","ORIG_SYS_LINE_REF","ORIG_SYS_SHIPMENT_REF","ORG_ID","INVENTORY_ITEM","LINE_TYPE_ID",request_date,"SCHEDULE_DATE","DELIVERY_LEAD_TIME","ORDERED_QUANTITY","ORDER_QUANTITY_UOM",sold_from_org_id, sold_to_org_id, ship_from_org_id, ship_to_org_id, invoice_to_org_id,"UNIT_SELLING_PRICE","CREATED_BY","CREATION_DATE","LAST_UPDATED_BY","LAST_UPDATE_DATE","LAST_UPDATE_LOGIN","OPERATION_CODE")
    values
    (1046,'101040', '1', '1', 204, 'AS72111', 1427, sysdate, sysdate+1, 0, 10, 'Ea' ,204, 1004, 606, 1018, 1017,100,0,sysdate,0,sysdate,0,'CREATE');
    Any help is appreciated.
    FYI - this is a 11.5.10.2 version installed on Windows 2003 server.
    Thanks in advance.
    Jags

    I might be late in replying, but hope it might help.
    From your query it seems you are inserting records into interface tables and then calling process order API( probably from some PL/SQL block).
    This is where I am confused, because I hope you understand, that interface tables are for use with Order Import concurrent Program, and for Process ORder API, you need to provide the data as parameter. The api has, header record type and line table type as parameters. So you need to assign correct data to these variables and pass them as parameter when you are calling Process Order API.
    If you are doing the same thing, then post the exact pl/SQL code and error message from the API. That might help diagnose the issue.
    Regards,
    Nitin Darji

  • Error while executing the reversal in KO88 for an internal order

    Hi Experts,
    I am getting  the below error while doing the Actual settlement : order reverse through t code KO88. we are currently using the SAP ECC 5.0 and i found the SAP notes 215944 and 335428, which are upto release 4.6C.
    System error - deletion not possible
    Message no. AAPO186
    i can see that the doc has generated for the settlement and for reversal it is giving the error. Can some one help me who has faced this type of problem earlier.
    Thanks & Regards,
    Venkat

    Hi,
    Additionally, try to check 300273 note.
    Regards,
    Eli

  • Concurrent manager encountered an error while running sql*plus for your concurrent request create internal order

    Hi
    We have a big problem, We can't create internal orders, when I run the CREATE INTERNAL ORDER, it finish with ERROR:
    Concurrent Manager encountered an error while running SQL*Plus for your concurrent request 134980682.
    Review your concurrent request log and/or report output file for more detailed information.
    this is the log:
    +---------------------------------------------------------------------------+
    Purchasing: Version : 12.0.0
    Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
    POCISO module: Create Internal Orders
    +---------------------------------------------------------------------------+
    Current system time is 26-JUL-2013 09:21:09
    +---------------------------------------------------------------------------+
    +-----------------------------
    | Starting concurrent program execution...
    +-----------------------------
    +---------------------------------------------------------------------------+
    Start of log messages from FND_FILE
    +---------------------------------------------------------------------------+
    Begin create internal sales order
    Updating Req Headers
    14 Reqs selected for processing
    Top of Fetch Loop
    Source Operating Unit: 82
    Selecting Currency Code
    Currency Code : MXP
    Selecting Order Type
    Order Type ID:1001
    Selecting Price List from Order Type
    Deliver To Location Id: 196
    Inserting Header : 3908784
    Getting the customer id
    Getting the customer id: 15334
    Unhandled Exception : ORA-01403: no data found
    +---------------------------------------------------------------------------+
    End of log messages from FND_FILE
    +---------------------------------------------------------------------------+
    Concurrent Manager encountered an error while running SQL*Plus for your concurrent request 134980682.
    Review your concurrent request log and/or report output file for more detailed information.
    +---------------------------------------------------------------------------+
    Executing request completion options...
    Output file size:
    78
    Output is not being printed because:
    The print option has been disabled for this report.
    Finished executing request completion options.
    +---------------------------------------------------------------------------+
    Concurrent request completed
    Current system time is 26-JUL-2013 09:21:14
    +---------------------------------------------------------------------------+
    Some suggestion for resolve it??
    Thanks & Regards.

    In the document 294932.1 Section 4 there are no pre-installation patches or update for OS RedHat LinuxAS4.
    When I type echo $LD_ASSUME_KERNEL it doesn't display any value so do I need to set the LD_Assume_Kernal value manually.
    If yes, please let me know the path and command to set the kernel value.
    Thanks
    Amith

  • KO88 Internal Order Settlement

    Hi All,
    Internal order Settlement rule has Asset under construction .
    Current year cost has been settled to AUC. However an cost belonging to last year Dec 2006 is not settled to AUC.
    This cost is available in Line item of Internal order in Tcode : KOb1 for the previous year 2006. For the current year 2007 the balance of the order is Zero as all cost are settled through T code: KO8G
    We tried settling the cost to period 12 year 2007 in KO88 system said Settle the balance from previous year in the previous year first. We have applied SAP note: 819197. Now we are getting another error AUC not completely credited.
    Can you provide your inputs
    Thanks

    KO88 is a Period end activities, after each month nend you have to mandatorily run KO88 settlement.
    select Posting period 05 and do the settlement.
    Reagrds,
    Alok

  • 500 Internal server error while running sqlsrv_query in PHP

    Hello everyone I am having a problem with sqlsrv_query I will be grateful to you please provide some help.
    I am running a query through php:
    $ls_parcel_query = "select  * from  ParcelDetail order by ExtractDate";
    $result = sqlsrv_query($conn, $ls_parcel_query, array(), array("Scrollable"=>"keyset","QueryTimeout"=>300));
    $no_of_rows = sqlsrv_num_rows($result);
    echo "<br/>".$no_of_rows;
    It gives (After 30 seconds):
    500 - Internal server error.
    There is a problem with the resource you are looking for, and it cannot be displayed.
    I have php.ini settings like below:
    max_execution_time = 90
    memory_limit = 128M
    While running this query in SQL SERVER 2008 R2, it successfully gives result in some times in 1 minute and sometimes in 2 minutes.

    Hello,
    A 500 Error will be caused due to many reason.To troubleshooting this issue, you can try to check out the error log and get more information on what is causing the error.
    Reference :
    "500 Internal Server Error" while running PHP
    HTTP Error 500 Internal server for php pages and solution
    Regards,
    Fanny Liu
    Fanny Liu
    TechNet Community Support

  • Error has occurred when running internal order report

    Error has occurred when running internal order report. Last month also used this report without any error.
    Error #01: [ASE Error SQL422]Too many nested expressions or logical operators to compile. Try splitting query or limiting ANDs and ORs.
    Error #02: SQL Error: 422
    Error #03: An error occurred while reading the data; Navigation is possible.
    Please guide me to solve this issue.

    Please just say how you removed the CC version and did you remove the Preferences from Hidden User>Library??
    https://helpx.adobe.com/lightroom/kb/preference-file-locations-lightroom-41.html
    In here??
    Sorry I'm trying to help but please answer the questions specifically... thanks.

  • Internal Server Error while running the page from server

    Hi gurus,
    We are getting below error while running the oaf page from our instance. we have executed the query behind the page and it took around 40 seconds to execute. but oaf page is getting errored out with below error message after taking long time.
    Internal Server Error
    The server encountered an internal error or misconfiguration and was unable to complete your request.
    Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error.
    More information about this error may be available in the server error log.
    Please help me..
    Thanks
    Raghava

    Is it 9i Jdeveloper or 10G. Also check the Jdeveloper is being run on a compatible database. A Jdeveloper for 11i should run on an instance having 11i installed and same for R12. Also check the version of OA Frameworrk in the Jdeveloper you are using and the version deployed in instance.
    Regards
    Sumti

  • Internal error while running forms in oracle application server 10 G

    I am getting following error while running form in browser for oracle application server 10 G
    "Internal Server Error
    The server encountered an internal error or misconfiguration and was unable to complete your request.
    Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error.
    More information about this error may be available in the server error log."
    where to find the error log and how to rectify it.
    Arun

    and at what time does the error occur? Upon starting the form? When you browse data? When you execute a query?
    Also: do you use Bean Areas in your form? How do you initialise them?
    Have you compiled the form against the same version of database and PL/SQL libraries as the ones you use in the runtime environment? Have you compiled the form in Form Builder? If so, try opening the form, hit Ctrl-Shift-K twice (!), then Ctrl-S, and only then Ctrl-T.
    Do you start the form from another form? If so, has this calling form been compiled against the same environment?

  • Error while running the Managed server

    Hi
    i am getting the below error while running the Managed server.
    java.lang.IllegalArgumentException: config=oracle.dms.config.DumpConfig@186793e logDir=null agency=oracle.dms.reporter.SpyAgency@181f91a dmsTimer=java.util.concurrent.ScheduledThreadPoolExecutor@95b5c
         at oracle.dms.impl.producer.Dumper.<init>(Dumper.java:100)
         at oracle.dms.app.ServerInitializer.init(ServerInitializer.java:136)
         at oracle.dms.app.BaseInitializer.getInitializer(BaseInitializer.java:360)
         at oracle.dms.app.DmsSpy.init(DmsSpy.java:210)
         at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
         at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)
         at weblogic.servlet.internal.StubLifecycleHelper.<init>(StubLifecycleHelper.java:48)
         at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:539)
         at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1985)
         at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1959)
         at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1878)
         at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3153)
         at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
         at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
         at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
         at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:636)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
         at weblogic.application.internal.SingleModuleDeployment.activate(SingleModuleDeployment.java:43)
         at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
         at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
         at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
         at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
         at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
         at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
         at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
         at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
         at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
         at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
         at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
         at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    >
    ####<Dec 6, 2011 7:47:30 PM IST> <Info> <Deployer> <01hw198371> <managed_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JGJiy3T5EgGqywAhMG1ErYE5000002> <1323181050633> <BEA-149059> <Module dms.war of application DMS Application [Version=11.1.1.1.0] is transitioning from STATE_ADMIN to STATE_PREPARED on server managed_server1.>
    ####<Dec 6, 2011 7:47:30 PM IST> <Info> <Deployer> <01hw198371> <managed_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JGJiy3T5EgGqywAhMG1ErYE5000002> <1323181050711> <BEA-149060> <Module dms.war of application DMS Application [Version=11.1.1.1.0] successfully transitioned from STATE_ADMIN to STATE_PREPARED on server managed_server1.>
    ####<Dec 6, 2011 7:47:30 PM IST> <Error> <Deployer> <01hw198371> <managed_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JGJiy3T5EgGqywAhMG1ErYE5000002> <1323181050726> <BEA-149231> <Unable to set the activation state to true for the application 'DMS Application [Version=11.1.1.1.0]'.
    weblogic.application.ModuleException: [HTTP:101216]Servlet: "Spy" failed to preload on startup in Web application: "dms.war".
    java.lang.IllegalArgumentException: config=oracle.dms.config.DumpConfig@186793e logDir=null agency=oracle.dms.reporter.SpyAgency@181f91a dmsTimer=java.util.concurrent.ScheduledThreadPoolExecutor@95b5c
         at oracle.dms.impl.producer.Dumper.<init>(Dumper.java:100)
         at oracle.dms.app.ServerInitializer.init(ServerInitializer.java:136)
         at oracle.dms.app.BaseInitializer.getInitializer(BaseInitializer.java:360)
         at oracle.dms.app.DmsSpy.init(DmsSpy.java:210)
         at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
         at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)
         at weblogic.servlet.internal.StubLifecycleHelper.<init>(StubLifecycleHelper.java:48)
         at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:539)
         at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1985)
         at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1959)
         at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1878)
         at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3153)
         at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
         at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
         at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
         at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:636)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
         at weblogic.application.internal.SingleModuleDeployment.activate(SingleModuleDeployment.java:43)
         at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
         at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
         at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
         at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
         at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
         at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
         at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
         at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
         at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
         at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
         at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
         at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
         at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1510)
         at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
         at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
         at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:636)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
         at weblogic.application.internal.SingleModuleDeployment.activate(SingleModuleDeployment.java:43)
         at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
         at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
         at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
         at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
         at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
         at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
         at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
         at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
         at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
         at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
         at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
         at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    Caused By: java.lang.IllegalArgumentException: config=oracle.dms.config.DumpConfig@186793e logDir=null agency=oracle.dms.reporter.SpyAgency@181f91a dmsTimer=java.util.concurrent.ScheduledThreadPoolExecutor@95b5c
         at oracle.dms.impl.producer.Dumper.<init>(Dumper.java:100)
         at oracle.dms.app.ServerInitializer.init(ServerInitializer.java:136)
         at oracle.dms.app.BaseInitializer.getInitializer(BaseInitializer.java:360)
         at oracle.dms.app.DmsSpy.init(DmsSpy.java:210)
         at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
         at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)
         at weblogic.servlet.internal.StubLifecycleHelper.<init>(StubLifecycleHelper.java:48)
         at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:539)
         at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1985)
         at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1959)
         at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1878)
         at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3153)
         at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
         at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
         at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
         at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:636)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
         at weblogic.application.internal.SingleModuleDeployment.activate(SingleModuleDeployment.java:43)
         at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
         at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
         at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
         at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
         at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
         at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
         at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
         at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
         at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
         at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
         at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
         at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    >
    can anyone help

    Srinath is 100% correct.
    If the deployment failed, then there will very likely be some mention in the log.
    You state that you checked the log, but you didn't mention whether you found an error, no error, a successful startup, etc. you are providing painfully few details to assist.
    I would bet if you posted your .log and .out logs to Pastebin.com - #1 paste tool since 2002 and provided us links, We would be able to point out the error.
    Lacking that information, my best advice would be to re-install and double-check you're completing all steps in the correct order.
    Also, be sure to always search the product documentation first, the search this forum. For basic issues (e.g., standard installation), there is a high probability that someone else has asked that question.
    I hope that helps,
    -ryan

Maybe you are looking for