Error while running multiple Smart Publishing Wizards

Sorry this is so long....
When I run multiple publishing wizards (two separate source
folders to two separate destination folders) I get an error stating
"The process cannot access the file because it is being used by
another process." The file is not identified and the result varies.
I have seen the following because of this error:
1. The first publishing job completes OK but the second
wizard has to be restarted.
2. The first job resets back to the dialog where you click
Finish to start it and the second continues OK.
3. The first job resets and the second job errors when it
gets to the end of the copy.
I have been just running them one at a time but am now
maintaining 80+ sites supported by 3 project files and it doesn't
matter if the Wizards are publishing from different projects. I get
the same problem if just clicking publish from the Build dialog in
the RH project. Basically any time two publish jobs are running
they crash each other.
I've started to use batch files with xcopy statements to move
the sites from my C: to the Web server (mapped drive on the
network). I haven't seen any problems with this approach and I can
launch as many jobs as I want.
I would welcome any advice or conjecture as to resolving the
Wizard problem and any concerns with using the xcopy?

I also get the problem if from teh same project I generate
say 4 SSLs then kick off four Smart Publishing Wizards to publish
each. You can't do this by clicking Publish from the generate
dialog because RH dedicates itself to the task. So I use the Smart
Publishing Wizard from the Toolbox.
I did set up the xcopy to only copy changed files using /D
parameter. It works well and I was going to write a manager to
allow me to kick off common groupings of copies with one click and
a little monitoring app to watch it and let me know when complete.
Before I did all that I just wanted to see if the wizard
behavior is normal or if I have a problem that can be
corrected.

Similar Messages

Error while Running sample Smart Sync Application

Hi all,
I followed step that has been given on mdk 2.5 tool kit <b>to create a Sample Smart Sync application which donwloads the short text and country code</b> with SyncBo,metadata xml and MCD,
while running a smart sync on mi client i am getting an error..................
<b>Error: 500
Location: /me/jsp/home/home.jsp
Internal Servlet Error:
javax.servlet.ServletException
     at org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImpl.java:461)
     at jsp.home.home._jspService(Unknown Source)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:119)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java)
     at org.apache.tomcat.core.ServletWrapper.doService(ServletWrapper.java:405)
     at org.apache.tomcat.core.Handler.service(Handler.java:287)
     at org.apache.tomcat.core.ServletWrapper.service(ServletWrapper.java:372)
     at org.apache.tomcat.facade.RequestDispatcherImpl.doForward(RequestDispatcherImpl.java:222)
     at org.apache.tomcat.facade.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:162)
     at com.sap.ip.me.api.runtime.jsp.AbstractMEHttpServlet.dispatchRequest(AbstractMEHttpServlet.java:573)
     at com.sap.ip.me.api.runtime.jsp.AbstractMEHttpServlet.doGet(AbstractMEHttpServlet.java:343)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java)
     at com.sap.ip.me.api.runtime.jsp.AbstractMEHttpServlet.service(AbstractMEHttpServlet.java:164)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java)
     at org.apache.tomcat.core.ServletWrapper.doService(ServletWrapper.java:405)
     at org.apache.tomcat.core.Handler.service(Handler.java:287)
     at org.apache.tomcat.core.ServletWrapper.service(ServletWrapper.java:372)
     at org.apache.tomcat.core.ContextManager.internalService(ContextManager.java:806)
     at org.apache.tomcat.core.ContextManager.service(ContextManager.java:752)
     at org.apache.tomcat.service.http.HttpConnectionHandler.processConnection(HttpConnectionHandler.java:213)
     at org.apache.tomcat.service.TcpWorkerThread.runIt(PoolTcpEndpoint.java:416)
     at org.apache.tomcat.util.ThreadPool$ControlRunnable.run(ThreadPool.java:501)
     at java.lang.Thread.run(Unknown Source)
Root cause:
java.lang.NullPointerException
     at jsp.home.home._jspService(Unknown Source)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:119)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java)
     at org.apache.tomcat.core.ServletWrapper.doService(ServletWrapper.java:405)
     at org.apache.tomcat.core.Handler.service(Handler.java:287)
     at org.apache.tomcat.core.ServletWrapper.service(ServletWrapper.java:372)
     at org.apache.tomcat.facade.RequestDispatcherImpl.doForward(RequestDispatcherImpl.java:222)
     at org.apache.tomcat.facade.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:162)
     at com.sap.ip.me.api.runtime.jsp.AbstractMEHttpServlet.dispatchRequest(AbstractMEHttpServlet.java:573)
     at com.sap.ip.me.api.runtime.jsp.AbstractMEHttpServlet.doGet(AbstractMEHttpServlet.java:343)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java)
     at com.sap.ip.me.api.runtime.jsp.AbstractMEHttpServlet.service(AbstractMEHttpServlet.java:164)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java)
     at org.apache.tomcat.core.ServletWrapper.doService(ServletWrapper.java:405)
     at org.apache.tomcat.core.Handler.service(Handler.java:287)
     at org.apache.tomcat.core.ServletWrapper.service(ServletWrapper.java:372)
     at org.apache.tomcat.core.ContextManager.internalService(ContextManager.java:806)
     at org.apache.tomcat.core.ContextManager.service(ContextManager.java:752)
     at org.apache.tomcat.service.http.HttpConnectionHandler.processConnection(HttpConnectionHandler.java:213)
     at org.apache.tomcat.service.TcpWorkerThread.runIt(PoolTcpEndpoint.java:416)
     at org.apache.tomcat.util.ThreadPool$ControlRunnable.run(ThreadPool.java:501)
     at java.lang.Thread.run(Unknown Source)</b>
please help me on this issue................
regards,
Venugopal

HI Karthick,
Thanks for your reply.
while exporting the application it is running properly on NWDS platform as well in Eclipse platform but not in mi client.
i am sure that,
<b>MCD Name = Application Name = War file which is MDK_TUTORIAL_SYNC</b>
Below is my Meta XML file:
<b><?xml version="1.0" encoding="utf-8" ?>
- <MeRepApplication schemaVersion="1.1" id="MDK_TUTORIAL_SYNC" version="250901">
<Property name="CLIENT.BUILDNUMBER" />
<Property name="C_APPLRESOLVE" />
<Property name="DATA_VISIBLE_SHARED" />
<Property name="EN">LANGUAGE</Property>
<Property name="E_APPLRESOLVE" />
<Property name="FACADE_C_CLIENT">X</Property>
<Property name="FACADE_E_CLIENT">X</Property>
<Property name="HOMEPAGE.INVISIBLE" />
<Property name="INITVALUE" />
<Property name="RUNTIME">JSP</Property>
<Property name="TYPE">APPLICATION</Property>
- <SyncBO id="ZNWW_EXM01" version="2" type="download" allowCreate="false" allowModify="false" allowDelete="false" reqDirectSync="false">
- <TopStructure name="TOP">
- <Field name="SYNC_KEY" type="N" length="10" decimalLength="0" signed="false" isKey="true" isIndex="true">
<Input type="create">false</Input>
<Input type="modify">false</Input>
</Field>
- <Field name="LAND_TEXT" type="C" length="50" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
<Input type="modify">false</Input>
</Field>
</TopStructure>
</SyncBO>
</MeRepApplication></b>
reffer the above xml file and please find if i miss any fields.
regards,
Venugopal.

Js-error while executing Multiple Image Upload wizard

If i want to save the configured window of Multiple Image Upload with Save to Database wizard i get this js-error: "While executing onClick in MIUploadWSaveWizard.htm, a JavaScript error occured".
can someone help?
thanx
peter

That again would be more of a question for the Cold Fusion group.
Try http://forums.adobe.com/community/coldfusion/coldfusion_administration
Those people will be able to help you out more.
Brad Lawryk
Adobe Community Expert, Dreamweaver
Adobe Usergroup Manager, Northern British Columbia Adobe User Group

Error while running the BI Publisher using burst option

Hi,
I am new to BI Publisher.I have a requirement where I have to save my report to different files based on the department category.
Going through the net,I found the followiing link which explained what I required.
http://www.oracle.com/technology/obe/obe_bi/bipub/advance/advance.htm#t4s2
But I am getting the following error
Job ID 104
Job Name Bursting2
Job Owner administrator
Report Name Bursting2
Report Scope Private
Job Schedule Run at 3/8/10 3:03 PM
Bursting mode On
Job Execution Information
History ID 104
Status Failed
Start Processing Time 3/8/10 3:03 PM
End Processing Time 3/8/10 3:03 PM
Time Elapsed 906.00 millisec
Bursting Definitions
Bursting Node /ROWSET/ROW/DNAME
Delivery Node /ROWSET/ROW/DNAME
Delivery 1 :
Delivery Key RESEARCH
Delivery Type FILE
Status Failed
System Message C:\kuleena\RESEARCH.pdf (The system cannot find the path specified)
Delivery 2 :
Delivery Key SALES
Delivery Type FILE
Status Failed
System Message C:\kuleena\SALES.pdf (The system cannot find the path specified)
Please help me out on the same.
Thanks and Regards,
Kuleena

Hi,
Just a doubt.
I tried running the above report from the machine where BI PUBLISHER has been installed,I was able to save reports with different names to the folder.How can I run the report from my machine?What path should I give when we do not run from the server?
Following was my bursting query,
select NVL(d.dname,'SALES') KEY, 'Template2' TEMPLATE, 'RTF' TEMPLATE_FORMAT,
'en-US' LOCALE, 'PDF' OUTPUT_FORMAT, 'FILE' DEL_CHANNEL, 'C:\kuleena' PARAMETER1,
d.dname || '.pdf' PARAMETER2
from dept d
Kindly reply.
Edited by: K Tanna on Mar 11, 2010 2:12 AM

DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER Error while running multiple instances of SSIS through batch files.

I have an SSIS package which loads data from an Excel file into a SQL Database. This SSIS package is triggered by a batch file.
As part of a load test, I have created 20 batch files that run the same package for a different Excel file.
To have these batch files run together, I have created 2 master batch files, one to run them sequentially (using CALL) and the to run them parallely (using START). I do have any issues in both of them.
But when I try to run 5 instances of the same batch file run concurrently (using START XYZ.bat 5 times) only 1 succeeds. CALL XYZ.bat 5 times has no issues.
Is it because during START, the Excel file is opened by 1 batch file and unavailable to the other 4 instances? If yes, then why doesn't SSIS throw an error when I run the package through BIDS keeping the Excel file opened? Is there something I can do to
overcome a FAILURE?
Nelton D'Souza MS BI Developer

Yes, it seems that since you open the same file from multiple processes the error occurs due to the sharing violation.
I guess you will get the error opening several Excel files from BIDS trying to read / write to it if you have two BIDS so it is consistent. Excel disallows multiple access paths by its design.
Arthur My Blog

Configuration Failed Error while running the Shareoint 2010 Products and Configuration wizard in windows 7

Hi Techys,
Kindly help me to resolve the below issue
"Configuration Failed Error while running the Shareoint 2010 Products and Configuration wizard in windows 7"
Many Thanks,
Madhu

Hi,
Follow this link for smooth installation for SP 2010 on Win 7.
http://msdn.microsoft.com/en-us/library/office/ee554869(v=office.14).aspx
Murugesa Pandian.,MCTS|App.Development|Configure

Error while running a customize report in oracle ebs

Hi ..
can anybody suggest how to solve the follwing error while running a customize report in oracle ebs?
XXIFMS: Version : UNKNOWN
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
Current system time is 03-JUN-2011 11:09:24
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_DATE_FROM='2010/04/01 00:00:00'
P_DATE_TO='2011/06/03 00:00:00'
Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.AL32UTF8
stat_low = 9
stat_high = 0
emsg:was terminated by signal 9
ld.so.1: rwrun: fatal: librw.so: open failed: No such file or directory
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program was terminated by signal 9
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 1068011.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
------------- 1) PUBLISH -------------
Beginning post-processing of request 1068011 on node D0005 at 03-JUN-2011 11:09:24.
Post-processing of request 1068011 failed at 03-JUN-2011 11:09:24 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
Finished executing request completion options.
Concurrent request completed
Current system time is 03-JUN-2011 11:09:24

Please post the details of the application release, database version and OS.
Is the issue with this specific concurrent program?
Can you find any errors in the CM/OPP log files?
Please see if these docs help.
On R12.1.1/Solaris Platform While Generating Oracle Reports Files Failed With Error " ld.so.1: rwconverter: fatal: librw.so: open failed: No such file or directory [ID 1067786.1]
Apps UPG Fail With Error Ld.So.1: Rwserver: Fatal: Librw.So [ID 961222.1]
Thanks,
Hussein

Error while running web application through JDEV (10.1.3.0.3) in OC4J

Error while running web application through JDEV (10.1.3.0.3) in OC4J.
Here is the error message.
07/10/02 14:45:28 Exception in thread "OC4J Launcher" oracle.classloader.util.AnnotatedNoClassDefFoundError:
     Missing class: javax.xml.bind.JAXBContext
     Dependent class: com.oracle.corba.ee.impl.orb.config.InternalSettingsORBConfigImpl
     Loader: oc4j:10.1.3
     Code-Source: /C:/jdev/j2ee/home/lib/oc4j-internal.jar
     Configuration: <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar
The missing class is not available from any code-source or loader in the server.
07/10/02 14:45:28      at oracle.classloader.PolicyClassLoader.handleClassNotFound (PolicyClassLoader.java:2073) [C:/jdev/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@7]
     at oracle.classloader.PolicyClassLoader.internalLoadClass (PolicyClassLoader.java:1681) [C:/jdev/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@7]
     at oracle.classloader.PolicyClassLoader.loadClass (PolicyClassLoader.java:1633) [C:/jdev/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@7]
     at oracle.classloader.PolicyClassLoader.loadClass (PolicyClassLoader.java:1618) [C:/jdev/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@7]
     at java.lang.ClassLoader.loadClassInternal (ClassLoader.java:319) [jre bootstrap, by jre.bootstrap]
     at com.oracle.corba.ee.impl.orb.config.InternalSettingsORBConfigImpl.init (InternalSettingsORBConfigImpl.java:46) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
     at com.oracle.corba.ee.impl.orb.config.SunRIORBConfigImpl.init (SunRIORBConfigImpl.java:97) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
     at com.oracle.iiop.server.IIOPServerExtensionProvider.configureOrb (IIOPServerExtensionProvider.java:26) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
     at com.oracle.corba.ee.impl.orb.ORBServerExtensionProviderImpl.preInitApplicationServer (ORBServerExtensionProviderImpl.java:45) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
     at com.evermind.server.ApplicationServer.serverExtensionPreInit (ApplicationServer.java:1031) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
     at com.evermind.server.ApplicationServer.setConfig (ApplicationServer.java:861) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
     at com.evermind.server.ApplicationServerLauncher.run (ApplicationServerLauncher.java:98) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
     at java.lang.Thread.run (Thread.java:595) [jre bootstrap, by jre.bootstrap]

Hi,
The guide you were refering was pointing to 10.1.2 wizards.
For the latest 10.1.3 tutorial, please follow the below tutorial link :
http://www.oracle.com/technology/products/jdev/101/tutorials/WS/WSandAScontrol.htm
Hope this helps,
Sunil..

Error while running the tutorial posted by Steve Muench

Hi Guys,
I have been trying to run the tutorial published by Steve Muench on October 9 2006. I've followed all the steps as specified in the tutorial.
Chapter 3.4:Run the Application, should supposed to compile and run my application using stand-alone embedded OC4J. It was compiled witout any error. But gave me the following error while running the application.
[Starting OC4J using the following ports: HTTP=8988, RMI=23891, JMS=9227.]
C:\oracledevday\jdeveloper\jdev\system\oracle.j2ee.10.1.3.39.14\embedded-oc4j\config>
C:\oracledevday\jdeveloper\jdk\bin\javaw.exe -client -classpath C:\oracledevday\jdeveloper\j2ee\home\oc4j.jar;C:\oracledevday\jdeveloper\jdev\lib\jdev-oc4j-embedded.jar -Xverify:none -DcheckForUpdates=adminClientOnly -Doracle.application.environment=development -Doracle.j2ee.dont.use.memory.archive=true -Doracle.j2ee.http.socket.timeout=500 -Doc4j.jms.usePersistenceLockFiles=false oracle.oc4j.loader.boot.BootStrap -config C:\oracledevday\jdeveloper\jdev\system\oracle.j2ee.10.1.3.39.14\embedded-oc4j\config\server.xml
[waiting for the server to complete its initialization...]
2006-10-12 22:47:17.250 NOTIFICATION JMSServer[]: OC4J JMS server recovering transactions (commit 0) (rollback 0) (prepared 0).
2006-10-12 22:47:17.265 NOTIFICATION JMSServer[]: OC4J JMS server recovering local transactions Queue[jms/Oc4jJmsExceptionQueue].
2006-10-12 22:47:22.609 ERROR J2EE HTTP-00004 Internal error raised tyring to instantiate web-application: webapp defined in web site OC4J 10g (10.1.3) Default Web Site. Application: datatags does not exist. Error creating Web application: webapp
Ready message received from Oc4jNotifier.
Embedded OC4J startup time: 14015 ms.
Target URL -- http://10.10.10.10:8988/MyDemo/faces/pages/EmployeesTable.jspx
06/10/12 22:47:22 Oracle Containers for J2EE 10g (10.1.3.1.0) initialized
22:47:26 WARN (Digester) -[ConverterRule]{faces-config/converter} Merge(javax.faces.Short,null)
22:47:26 WARN (Digester) -[ConverterRule]{faces-config/converter} Merge(null,java.lang.Short)
22:47:26 WARN (Digester) -[ConverterRule]{faces-config/converter} Merge(javax.faces.Byte,null)
22:47:26 WARN (Digester) -[ConverterRule]{faces-config/converter} Merge(null,java.lang.Byte)
22:47:26 WARN (Digester) -[ConverterRule]{faces-config/converter} Merge(javax.faces.Integer,null)
22:47:26 WARN (Digester) -[ConverterRule]{faces-config/converter} Merge(null,java.lang.Integer)
22:47:26 WARN (Digester) -[ConverterRule]{faces-config/converter} Merge(javax.faces.Long,null)
22:47:26 WARN (Digester) -[ConverterRule]{faces-config/converter} Merge(null,java.lang.Long)
22:47:26 WARN (Digester) -[ConverterRule]{faces-config/converter} Merge(javax.faces.Float,null)
22:47:26 WARN (Digester) -[ConverterRule]{faces-config/converter} Merge(null,java.lang.Float)
22:47:26 WARN (Digester) -[ConverterRule]{faces-config/converter} Merge(javax.faces.Double,null)
22:47:26 WARN (Digester) -[ConverterRule]{faces-config/converter} Merge(null,java.lang.Double)
22:47:26 WARN (Digester) -[ValidatorRule]{faces-config/validator} Merge(javax.faces.LongRange)
22:47:26 WARN (Digester) -[ConverterRule]{faces-config/converter} Merge(javax.faces.DateTime,null)
22:47:26 WARN (Digester) -[ConverterRule]{faces-config/converter} Merge(javax.faces.Number,null)
22:47:27 WARN (Digester) -[NavigationRuleRule]{faces-config/navigation-rule} Merge(*)
22:47:27 WARN (Digester) -[NavigationRuleRule]{faces-config/navigation-rule} Merge(*)
22:47:27 WARN (Digester) -[NavigationRuleRule]{faces-config/navigation-rule} Merge(/pages/EmployeesTable.jspx)
22:47:27 WARN (Digester) -[NavigationRuleRule]{faces-config/navigation-rule} Merge(/pages/DepartmentsTable.jspx)
22:47:27 WARN (Digester) -[NavigationRuleRule]{faces-config/navigation-rule} Merge(/pages/LocationsTable.jspx)
22:47:27 WARN (Digester) -[NavigationRuleRule]{faces-config/navigation-rule} Merge(/pages/CountriesTable.jspx)
22:47:27 WARN (Digester) -[NavigationRuleRule]{faces-config/navigation-rule} Merge(/pages/RegionsTable.jspx)
22:47:27 WARN (Digester) -[NavigationRuleRule]{faces-config/navigation-rule} Merge(/pages/JobsTable.jspx)
2006-10-12 22:47:29.546 TRACE Setting JAZN Config property ...
2006-10-12 22:47:29.625 NOTIFICATION ---- JAZNSecurityContext.getUserPrincipal(): NULL
2006-10-12 22:47:32.015 NOTIFICATION ADF Faces is running with time-stamp checking enabled. This should not be used in a production environment. See the oracle.adf.view.faces.CHECK_FILE_MODIFICATION property in WEB-INF/web.xml
22:47:32 DEBUG (JhsPageLifecycle) -Executing prepareModel, page=/pages/EmployeesTable.jspx, pagedef=EmployeesPageDef
22:47:32 DEBUG (JhsNavigationHandlerImpl) -Executing checkRoles
22:47:32 DEBUG (BreadcrumbStack) -Adding breadcrumb to stack: "Employees" (/pages/EmployeesTable.jspx)
22:47:32 DEBUG (JhsPageLifecycle) -Executing prepareRender, page=/pages/EmployeesTable.jspx, pagedef=EmployeesPageDef
22:47:32 DEBUG (BreadcrumbStack) -Breadcrumb already on stack; rolling back the stack
22:47:32 DEBUG (BreadcrumbStack) -Adding breadcrumb to stack: "Employees" (/pages/EmployeesTable.jspx)
2006-10-12 22:47:34.468 ERROR
Please advise and let me know if you need any other information from me.
Thanks,
Magesh.

Thanks Steven.
That makes sense. Is there anything I can do to make this demo work without de-installing 10.1.3.1 Preview? Or If I also install 10.1.3.0.4 with SU5 on another folder, does that affect my 10.1.3.1 Preview version?
I'm using 10.1.3.1 Preview version to learn Oracle's SOA suite.
Thanks again,
Magesh.

Getting error while running baseline_update.sh

Hi, getting the below error while running baseline_update script:
[10.22.13 16:57:17] INFO: Pushing authoring content to dgraph: AuthoringDgraph
[10.22.13 16:57:17] SEVERE: Service Unavailable (503):
Occurred while executing line 5 of valid BeanShell script:
2|
3|        compId = invokingObject.getElementId();
4|        log.info("Publishing Workbench 'authoring' configuration to MDEX '" + compId + "'");
5|        IFCR.pushAuthoringContentToDgraphById(compId);
6|
7|
[10.22.13 16:57:17] WARNING: Caught an exception while executing post-startup script for server component 'AuthoringDgraph'.
Caused by com.endeca.soleng.eac.toolkit.exception.AppControlException
com.endeca.soleng.eac.toolkit.script.Script runBeanShellScript - Error executing valid BeanShell script.
Caused by com.endeca.soleng.eac.toolkit.utility.IFCRUtility$HttpStatusException
com.endeca.soleng.eac.toolkit.utility.IFCRUtility execute - Service Unavailable (503):
[10.22.13 16:57:17] INFO: [AuthoringMDEXHost] Starting shell utility 'rmdir_dgraph-input-old'.
[10.22.13 16:57:18] INFO: [LiveMDEXHostA] Starting shell utility 'cleanDir_local-dgraph-input'.
[10.22.13 16:57:18] SEVERE: Error communicating with EAC agent while starting utility 'cleanDir_local-dgraph-input'.
Occurred while executing line 7 of valid BeanShell script:
4|    AuthoringDgraphCluster.copyIndexToDgraphServers();
5|    AuthoringDgraphCluster.applyIndex();
6|
7|    LiveDgraphCluster.cleanDirs();
8|    LiveDgraphCluster.copyIndexToDgraphServers();
9|    LiveDgraphCluster.applyIndex();
10|
[10.22.13 16:57:18] SEVERE: Error executing valid BeanShell script.
Occurred while executing line 29 of valid BeanShell script:
26|        Dgidx.run();
27|
28|        // distributed index, update Dgraphs
29|        DistributeIndexAndApply.run();
30|
31|        // Upload the generated dimension values to Workbench
32|        WorkbenchManager.cleanDirs();
[10.22.13 16:57:18] SEVERE: Caught an exception while invoking method 'run' on object 'BaselineUpdate'. Releasing locks.
Caused by java.lang.reflect.InvocationTargetException
sun.reflect.NativeMethodAccessorImpl invoke0 - null
Caused by com.endeca.soleng.eac.toolkit.exception.AppControlException
com.endeca.soleng.eac.toolkit.script.Script runBeanShellScript - Error executing valid BeanShell script.
Caused by com.endeca.soleng.eac.toolkit.exception.AppControlException
com.endeca.soleng.eac.toolkit.script.Script runBeanShellScript - Error executing valid BeanShell script.
Caused by com.endeca.soleng.eac.toolkit.exception.EacCommunicationException
com.endeca.soleng.eac.toolkit.utility.Utility start - Error communicating with EAC agent while starting utility 'cleanDir_local-dgraph-input'.
Caused by com.endeca.eac.client.EACFault
sun.reflect.NativeConstructorAccessorImpl newInstance0 - null
Please help??

Hi TimK,
File is empty.Nothing is there.I am using windows8 .
Please help .

Error while running DBMS_NETWORK_ACL_ADMIN

Hi,
I am completely new to APEX and trying out myself.
While Apex 4.2.1 installation, and configuring Embedded PL/SQL Gateway.
Topic: To grant connect privileges to any host for the APEX_040100 database user
getting error while running DBMS_NETWORK_ACL_ADMIN (as per example given in installation doc)
ERROR at line 1:
ORA-44416: Invalid ACL: Unresolved principal 'APEX_040100'
ORA-06512: at "SYS.DBMS_NETWORK_ACL_ADMIN", line 252
ORA-06512: at line 29
ORA-01403: no data found
Completely stuck and not able to proceed further....
OS: WinXP professional,
DB: Oracle Database 11g Express Edition Release 11.2.0.2.0
Thanks,
-Anand

Having multiple APEX_0% users suggests your database has originally started with APEX 4.0 and has been upgraded as subsequent versions are released (4.1.x, 4.2.x).
These accounts should be removed, as per the installation guide.
http://docs.oracle.com/cd/E37097_01/doc/install.42/e35123/otn_install.htm#CBHBABCC
Your current APEX owner would be APEX_040200, and you should be reading documentation pertinent to your APEX version.
Scott
blog: [url grassroots-oracle.com]grassroots-oracle.com
twitter: [url twitter.com/swesley_perth]@swesley_perth
-- please mark any useful posts as helpful or correct, in the end it helps us all

Concurrent Manager encountered an error while running Oracle*Report for you

hi
our team is running a report.but encountered
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_DELV_ID='8022'
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.US7ASCII
Enter Password:
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-1401: '': Fatal PL/SQL error occurred.
Report Builder: Release 10.1.2.0.2 - Production on Mon Jun 21 11:26:16 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+
Program exited with status 1
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 451508.
Review your concurrent request log and/or report output file for more detailed information.
+---------------------------------------------------------------------------+
Executing request completion options...
+------------- 1) PUBLISH -------------+
Beginning post-processing of request 451508 on node DEMO at 21-JUN-2010 11:26:17.
Post-processing of request 451508 failed at 21-JUN-2010 11:26:17 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
+--------------------------------------+
Finished executing request completion options.
+---------------------------------------------------------------------------+
Concurrent request completed
Current system time is 21-JUN-2010 11:26:17
+---------------------------------------------------------------------------+how to solve it?when i am searching in this error in cmctl log there is nothing for it.
i have lnched a SR on this they told to run it by appsrwrun.sh.how to run this report by appsrwrun.sh??
rgrds
Edited by: new2appsdba on Jun 21, 2010 4:19 AM

Hi,
how do you suspect its a OPP related issue??what is OPP?
Enter value for request_id: 451508
old   5: AND fcpp.concurrent_request_id = &&request_id
new   5: AND fcpp.concurrent_request_id = 451508
    REQ_ID NODE_NAME
LOGFILE_NAME
    451508 DEMO
/t01/demoap/inst/apps/DEMO_demo/logs/appl/conc/log/FNDOPP94508.txt
[demoap@demo ~]$ vi /t01/demoap/inst/apps/DEMO_demo/logs/appl/conc/log/FNDOPP94508.txt
[6/20/10 1:37:36 PM] [main] Starting GSF service with concurrent process id = 94508.
[6/20/10 1:37:36 PM] [main] Initialization Parameters: oracle.apps.fnd.cp.opp.OPPServiceThread:2:0:max_threads=5
[6/20/10 1:37:37 PM] [Thread-16] Service thread starting up.
[6/20/10 1:37:37 PM] [Thread-15] Service thread starting up.
[6/21/10 11:12:00 AM] [OPPServiceThread0] Post-processing request 451495.
[6/21/10 11:12:00 AM] [94508:RT451495] Executing post-processing actions for request 451495.
[6/21/10 11:12:00 AM] [94508:RT451495] Starting XML Publisher post-processing action.
[6/21/10 11:12:00 AM] [94508:RT451495]
Template code: WILPACKSLIP
Template app: ONT
Language:      en
Territory:     00
Output type:   PDF
[6/21/10 11:12:00 AM] [UNEXPECTED] [94508:RT451495] java.io.FileNotFoundException: /t01/demoap/inst/apps/DEMO_demo/logs/appl/conc/out/o451495.out (No such file or directory)
        at java.io.FileInputStream.open(Native Method)
        at java.io.FileInputStream.<init>(FileInputStream.java:106)
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:241)
        at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:172)
[6/21/10 11:12:00 AM] [94508:RT451495] Completed post-processing actions for request 451495.
[6/21/10 11:22:27 AM] [OPPServiceThread0] Post-processing request 451505.
[6/21/10 11:22:27 AM] [94508:RT451505] Executing post-processing actions for request 451505.
[6/21/10 11:22:27 AM] [94508:RT451505] Starting XML Publisher post-processing action.
[6/21/10 11:22:27 AM] [94508:RT451505]
Template code: WILPACKSLIP
Template app: ONT
Language:      en
Territory:     00
Output type:   PDF
[6/21/10 11:22:27 AM] [UNEXPECTED] [94508:RT451505] java.io.FileNotFoundException: /t01/demoap/inst/apps/DEMO_demo/logs/appl/conc/out/o451505.out (No such file or directory)
        at java.io.FileInputStream.open(Native Method)
        at java.io.FileInputStream.<init>(FileInputStream.java:106)
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:241)
        at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:172)
[6/21/10 11:22:27 AM] [94508:RT451505] Completed post-processing actions for request 451505.
[6/21/10 11:26:17 AM] [OPPServiceThread1] Post-processing request 451508.
[6/21/10 11:26:17 AM] [94508:RT451508] Executing post-processing actions for request 451508.
[6/21/10 11:26:17 AM] [94508:RT451508] Starting XML Publisher post-processing action.
[6/21/10 11:26:17 AM] [94508:RT451508]
Template code: WILPACKSLIP
Template app: ONT
Language:      en
Territory:     00
Output type:   PDF
[6/21/10 11:26:17 AM] [UNEXPECTED] [94508:RT451508] java.io.FileNotFoundException: /t01/demoap/inst/apps/DEMO_demo/logs/appl/conc/out/o451508.out (No such file or directory)
        at java.io.FileInputStream.open(Native Method)
        at java.io.FileInputStream.<init>(FileInputStream.java:106)
                                                              at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:241)
        at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:172)
[6/21/10 12:00:59 PM] [94508:RT451533] Completed post-processing actions for request 451533.
[6/21/10 12:17:51 PM] [OPPServiceThread0] Post-processing request 451573.
[6/21/10 12:17:51 PM] [94508:RT451573] Executing post-processing actions for request 451573.
[6/21/10 12:17:51 PM] [94508:RT451573] Starting XML Publisher post-processing action.
[6/21/10 12:17:51 PM] [94508:RT451573]
Template code: XXWEBB_EXP_INV
Template app: ONT
Language:      en
Territory:     00
Output type:   PDF
[6/21/10 12:17:51 PM] [UNEXPECTED] [94508:RT451573] java.io.FileNotFoundException: /t01/demoap/inst/apps/DEMO_demo/logs/appl/conc/out/o451573.out (No such file or directory)
        at java.io.FileInputStream.open(Native Method)
        at java.io.FileInputStream.<init>(FileInputStream.java:106)
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:241)
        at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:172)
[6/21/10 12:17:51 PM] [94508:RT451573] Completed post-processing actions for request 451573.
[6/21/10 12:19:19 PM] [OPPServiceThread0] Post-processing request 451577.
[6/21/10 12:19:19 PM] [94508:RT451577] Executing post-processing actions for request 451577.
[6/21/10 12:19:19 PM] [94508:RT451577] Starting XML Publisher post-processing action.
[6/21/10 12:19:19 PM] [94508:RT451577]
Template code: WILEXINVREP
Template app: ONT
Language:      en
Territory:     00
Output type:   PDF
[062110_121919525][][EXCEPTION] [DEBUG] ------- Preferences defined PreferenceStore -------
[062110_121919526][][EXCEPTION] [DEBUG] ------- Environment variables stored in EnvironmentStore -------
[062110_121919526][][EXCEPTION] [DEBUG] [FND_JDBC_IDLE_THRESHOLD.LOW]:[-1]
[062110_121919526][][EXCEPTION] [DEBUG] [FND_JDBC_IDLE_THRESHOLD.LOW]:[-1]
[062110_121919526][][EXCEPTION] [DEBUG] [SECURITY_GROUP_ID]:[0]
[062110_121919526][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_DECAY_INTERVAL]:[300]
[062110_121919526][][EXCEPTION] [DEBUG] [NLS_CHARACTERSET]:[US7ASCII]
[062110_121919526][][EXCEPTION] [DEBUG] [RESP_APPL_ID]:[-1]
[062110_121919526][][EXCEPTION] [DEBUG] [NLS_LANGUAGE]:[AMERICAN]
[062110_121919526][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MIN]:[1]
[062110_121919526][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MAX]:[2]
[062110_121919526][][EXCEPTION] [DEBUG] [NLS_NUMERIC_CHARACTERS]:[.,]
[062110_121919526][][EXCEPTION] [DEBUG] [APPS_JDBC_URL]:[jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(LOAD_BALANCE=YES)(FAILOVER=YES)(ADDRESS=(PROTOCOL=tcp)(HOST=demo.webbindia.com)(PORT=1527)))(CONNECT_DATA=(SID=DEMO)))]
[062110_121919527][][EXCEPTION] [DEBUG] [RESP_ID]:[-1]
[062110_121919527][][EXCEPTION] [DEBUG] [FND_MAX_JDBC_CONNECTIONS]:[500]
[062110_121919527][][EXCEPTION] [DEBUG] [FND_JDBC_USABLE_CHECK]:[false]
[062110_121919527][][EXCEPTION] [DEBUG] [USER_ID]:[-1]
[062110_121919527][][EXCEPTION] [DEBUG] [NLS_TERRITORY]:[AMERICA]
[062110_121919527][][EXCEPTION] [DEBUG] [FND_JDBC_PLSQL_RESET]:[false]
[062110_121919527][][EXCEPTION] [DEBUG] [FND_JDBC_CONTEXT_CHECK]:[true]
[062110_121919527][][EXCEPTION] [DEBUG] [NLS_DATE_FORMAT]:[DD-MON-RR]
[062110_121919527][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_DECAY_SIZE]:[5]
[062110_121919527][][EXCEPTION] [DEBUG] [FND_JDBC_IDLE_THRESHOLD.HIGH]:[-1]
[062110_121919527][][EXCEPTION] [DEBUG] [NLS_SORT]:[BINARY]
[062110_121919527][][EXCEPTION] [DEBUG] [NLS_DATE_LANGUAGE]:[AMERICAN]
[062110_121919527][][EXCEPTION] [DEBUG] [LOGIN_ID]:[-1]
[062110_121919528][][EXCEPTION] [DEBUG] ------- Properties stored in Java System Properties -------
[062110_121919528][][EXCEPTION] [DEBUG] [APPLTMP]:[/t01/demoap/inst/apps/DEMO_demo/appltmp]
[062110_121919528][][EXCEPTION] [DEBUG] [java.runtime.name]:[Java(TM) 2 Runtime Environment, Standard Edition]
[062110_121919528][][EXCEPTION] [DEBUG] [sun.boot.library.path]:[/t01/demoap/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/i386]
[062110_121919528][][EXCEPTION] [DEBUG] [java.vm.version]:[1.5.0_08-b03]
[062110_121919528][][EXCEPTION] [DEBUG] [OVERRIDE_DBC]:[true]
[062110_121919528][][EXCEPTION] [DEBUG] [dbcfile]:[/t01/demoap/inst/apps/DEMO_demo/appl/fnd/12.0.0/secure/DEMO.dbc]
[062110_121919528][][EXCEPTION] [DEBUG] [java.vm.vendor]:[Sun Microsystems Inc.]
[062110_121919528][][EXCEPTION] [DEBUG] [java.vendor.url]:[http://java.sun.com/]
[062110_121919528][][EXCEPTION] [DEBUG] [path.separator]:[:]
[062110_121919528][][EXCEPTION] [DEBUG] [APPLCSF]:[/t01/demoap/inst/apps/DEMO_demo/logs/appl/conc]
[062110_121919528][][EXCEPTION] [DEBUG] [java.vm.name]:[Java HotSpot(TM) Server VM]
[062110_121919528][][EXCEPTION] [DEBUG] [file.encoding.pkg]:[sun.io]
[062110_121919528][][EXCEPTION] [DEBUG] [user.country]:[US]
[062110_121919529][][EXCEPTION] [DEBUG] [sun.os.patch.level]:[unknown]
[062110_121919529][][EXCEPTION] [DEBUG] [java.vm.specification.name]:[Java Virtual Machine Specification]
[062110_121919529][][EXCEPTION] [DEBUG] [user.dir]:[/t01/demoap/inst/apps/DEMO_demo/logs/appl/conc/log]
[062110_121919529][][EXCEPTION] [DEBUG] [java.runtime.version]:[1.5.0_08-b03]
[062110_121919529][][EXCEPTION] [DEBUG] [CLIENT_PROCESSID]:[30369]
[062110_121919529][][EXCEPTION] [DEBUG] [java.awt.graphicsenv]:[sun.awt.X11GraphicsEnvironment]
[062110_121919529][][EXCEPTION] [DEBUG] [java.endorsed.dirs]:[/t01/demoap/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/endorsed]
[062110_121919529][][EXCEPTION] [DEBUG] [os.arch]:[i386]
[062110_121919529][][EXCEPTION] [DEBUG] [JTFDBCFILE]:[/t01/demoap/inst/apps/DEMO_demo/appl/fnd/12.0.0/secure/DEMO.dbc]
[062110_121919529][][EXCEPTION] [DEBUG] [java.io.tmpdir]:[/tmp]
[062110_121919529][][EXCEPTION] [DEBUG] [line.separator]:[
[062110_121919529][][EXCEPTION] [DEBUG] [java.vm.specification.vendor]:[Sun Microsystems Inc.]
[062110_121919529][][EXCEPTION] [DEBUG] [os.name]:[Linux]
[062110_121919529][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MIN]:[1]
[062110_121919530][][EXCEPTION] [DEBUG] [cpid]:[94508]
[062110_121919530][][EXCEPTION] [DEBUG] [sun.jnu.encoding]:[UTF-8]
[062110_121919530][][EXCEPTION] [DEBUG] [oracle.apps.fnd.common.Pool.leak.mode]:[stderr:off]
[062110_121919530][][EXCEPTION] [DEBUG] [java.library.path]:[/t01/demoap/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/i386/server:/t01/demoap/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/i386:/t01/demoap/apps/tech_st/10.1.3/appsutil/jdk/jre/../lib/i386:/t01/demoap/apps/tech_st/10.1.3/lib32:/t01/demoap/apps/tech_st/10.1.3/lib:/t01/demoap/apps/apps_st/appl/cz/12.0.0/bin:/t01/demoap/apps/apps_st/appl/iby/12.0.0/bin:/t01/demoap/apps/apps_st/appl/pon/12.0.0/bin:/t01/demoap/apps/apps_st/appl/sht/12.0.0/lib]
[062110_121919530][][EXCEPTION] [DEBUG] [java.specification.name]:[Java Platform API Specification]
[062110_121919530][][EXCEPTION] [DEBUG] [java.class.version]:[49.0]
[062110_121919530][][EXCEPTION] [DEBUG] [sun.management.compiler]:[HotSpot Server Compiler]
[062110_121919530][][EXCEPTION] [DEBUG] [queue_appl_id]:[0]
[062110_121919530][][EXCEPTION] [DEBUG] [os.version]:[2.6.18-164.11.1.el5xen]
[062110_121919530][][EXCEPTION] [DEBUG] [LONG_RUNNING_JVM]:[true]
[062110_121919530][][EXCEPTION] [DEBUG] [user.home]:[/t01/demoap]
[062110_121919530][][EXCEPTION] [DEBUG] [user.timezone]:[GMT+05:30]
[062110_121919530][][EXCEPTION] [DEBUG] [java.awt.printerjob]:[sun.print.PSPrinterJob]
--------------------------------------------------------------------------------lots of lines ----------------------------------------
[GC 17474K->10837K(24648K), 0.0037890 secs]
[GC 17685K->11057K(24648K), 0.0035530 secs]
[GC 17905K->11271K(24648K), 0.0029030 secs]
[GC 18119K->11488K(24648K), 0.0024650 secs]
[GC 18336K->11702K(24648K), 0.0023940 secs]
[GC 18550K->11919K(24648K), 0.0025010 secs]
[GC 18767K->12133K(24648K), 0.0024460 secs]
[GC 18981K->12344K(24648K), 0.0024020 secs]
[GC 19192K->12575K(24648K), 0.0024790 secs]
[GC 19423K->12781K(24648K), 0.0025650 secs]
[GC 19629K->12991K(24648K), 0.0024010 secs]
[GC 19839K->13212K(24648K), 0.0024430 secs]
[GC 20060K->13427K(24648K), 0.0024160 secs]
[GC 20275K->13641K(24648K), 0.0024440 secs]
[GC 20489K->13857K(24648K), 0.0024410 secs]
[GC 20705K->14073K(24648K), 0.0024570 secs]
[GC 20921K->14284K(24648K), 0.0024340 secs]
[GC 21132K->14504K(24648K), 0.0024580 secs]
[GC 21352K->14719K(24648K), 0.0024620 secs]
[GC 21567K->14935K(24648K), 0.0024600 secs]
[GC 21783K->15151K(24648K), 0.0024360 secs]
[GC 21999K->15365K(24648K), 0.0024180 secs]
[GC 22213K->15004K(24648K), 0.0204220 secs]rgrds
Edited by: new2appsdba on Jun 22, 2010 1:43 AM
Edited by: new2appsdba on Jun 22, 2010 2:12 AM
Edited by: new2appsdba on Jun 22, 2010 5:37 AM

Error while Bursting in XML Publisher

Hi,
Am getting an error while running XML File System Bursting Program.
ERROR:
--Exception
java.io.FileNotFoundException: /var/tmp/011409_/New_Report.pdf (No such file or directory)
The Control file looks like this:
<xapi:requestset xmlns:xapi="http://xmlns.oracle.com/oxp/xapi">
<xapi:request select="/XXDIS_NEW_REPORT/LIST_G_NEW_DIR">
<xapi:delivery>
<xapi:filesystem output = "/usr/tmp/NEW_REPORT/$(C_NAME)"/>
</xapi:delivery>
<xapi:document output-type="pdf" delivery="123">
<xapi:template type="rtf" location="xdo://XXDIS.XXDIS_NEW_REPORT.en.US/?getSource=true" filter="">
</xapi:template>
</xapi:document>
</xapi:request>
</xapi:requestset>
How do i resolve this error?

http://garethroberts.blogspot.com/2008/03/bi-publisher-ebs-bursting-101.html
Regards,
Gareth

Getting error while activating the smart form

hi guys,
i am getting the following run time error while activating the smart-form.
'SQL error in the database when accessing a table'.
can anyone tell why this error is coming

Refer to the below link, it may help you to close the thread.
[SQL error in the database when accessing a table|SQL error in the database when accessing a table.;
Regards,
saiRam

Error while running SRW.RUN_REPORT

Hi All,
I have requirement where i need to generate multiple reports with single request.
I have created to sample tables test1 and test2 with two columns each.I have created a paper report using first table and saved it as test.rdf in my c: drive and I created the second report using second table and with in Before Report Trigger i called the first report using srw.run_report('report = c:\test1.rdf desformat=screen'); .
When I ran the second report its showing an error messg REP-1428 :Error while running SRW.RUN_REPORT.
Can any one help me to resolve this issue.
Regard
Srinivas Pusa

Why can't you use two queries (one for test1 and another for test2) and create many pages (reports) one report? srq.run_report is avoided completely.

Error while running multiple Smart Publishing Wizards

Similar Messages

Maybe you are looking for