ERROR while running some AT Commands
Hi All,
I have connected my phone (Nokia 2680s-2 Slide) to my machine (Ubuntu 10.10) via Bluetooth ,
but am not able to execute some commands like AT+CPMS
here is some output
Welcome to minicom 2.4
OPTIONS: I18n
Compiled on Jun 3 2010, 13:46:31.
Port /dev/rfcomm0
Press CTRL-A Z for help on special keys
OK
AT
OK
AT+CPMS?
+CPMS: ,,,,,,,,
OK
AT+CPMS=?
+CPMS: (),(),()
OK
Welcome to minicom 2.4
OPTIONS: I18n
Compiled on Jun 3 2010, 13:46:31.
Port /dev/rfcomm0
Press CTRL-A Z for help on special keys
AT S7=45 S0=0 L1 V1 X4 &c1 E1 Q0
OK
AT
OK
AT+CPMS="MT"
ERROR
AT+CPMS="ME"
ERROR
AT+CPMS="SM"
ERROR
ATZ+CPMS?
OK
ATZ+CPMS=?
OK
AT+CPMS=SM
ERROR
AT+CPMS=MT
ERROR
AT+CPMS=ME
ERROR
AT+CPMS="MT","ME","MT"
ERROR
AT+CPMS="SM","SM","MT"
ERROR
Hi All,
any reply.............!!!!!!!!!!1
Similar Messages
-
Error while running some reports
Hi All,
We are facing issues while running some reports in BI production portal and below are some error messages.
--Access Error: Aithorization Check for caller assignment to j2ee security role (service.naming:jndi_all_operations] referncing j2ee security role [SAP -J2ee -engine :administrators].
--serialization failed for object (PCD location)
--The metadata of CMD "open_Dialog_DLg_Variable" are incorrect for parameter "Target_Dialog_Ref"
Kindly help me to resolve the above issue .
Regards,
Nithyathis is something to do with the java stack (J2EE engine) and its Authorizations..
So contact Basis explaining the issue and they should be able to help you out to get the proper access. -
Error while running BDB tcl testsuite commands
Hi,
I build berkeley db (4.7.25) libraries with tcl test suite is enabled in the solaris 9 machine using below configuration
../dist/configure --enable-dynamic ${BUILD_TAG} enable-tcl with-tcl=/export/tcl8.5/lib enable-test enable-java -prefix ${BUILD_DIR}
I used tcl 8.5, jdk1.6.0_18 and gcc-3.4.6 for building libraries.Libraries are build successfully.
When I run tcl command "run_std" in the tcl prompt, test is completed with below error logs in ALL.OUT file.
==========================================================================
cat ALL.OUT | grep FAIL
FAIL: error message in .out file: ./TESTDIR/lock003.1.out:FAIL:14:53:06 (00:00:01) number of other locks on 5: expected 0, got 1
FAIL: error message in .out file: ./TESTDIR/lock003.1.out:FAIL:14:53:06 (00:00:00) ../dist/../test/lockscript.tcl run: FAIL:14:53:06 (00:00:01) number of other locks on 5: expected 0, got 1: pid 28332: expected 0, got 1
FAIL: error message in .out file: ./TESTDIR/lock003.1.out:FAIL:18:24:50 (00:00:00) number of other locks on 44: expected 0, got 1
FAIL: error message in .out file: ./TESTDIR/lock003.1.out:FAIL:18:24:50 (00:00:00) ../dist/../test/lockscript.tcl run: FAIL:18:24:50 (00:00:00) number of other locks on 44: expected 0, got 1: pid 28378: expected 0, got 1
FAIL:03:09:45 (00:00:42) db_dump/db_load(./TESTDIR/primary007.db:couldn't create pipe: too many open files): expected 0, got 1
FAIL:03:09:45 (00:00:00) Dump/load of ./TESTDIR/primary007.db failed.
FAIL:03:09:45 (00:00:00) db_dump/db_load(./TESTDIR/secondary007.0.db:couldn't create pipe: too many open files): expected 0, got 1
FAIL:03:09:45 (00:00:00) Dump/load of ./TESTDIR/secondary007.0.db failed.
FAIL:03:09:45 (00:00:00) db_dump/db_load(./TESTDIR/secondary007.1.db:couldn't create pipe: too many open files): expected 0, got 1
FAIL:03:09:45 (00:00:00) Dump/load of ./TESTDIR/secondary007.1.db failed.
FAIL:03:10:31 (00:00:46) db_dump/db_load(./TESTDIR/primary008.db:couldn't create pipe: too many open files): expected 0, got 1
FAIL:03:10:31 (00:00:00) Dump/load of ./TESTDIR/primary008.db failed.
FAIL:03:10:31 (00:00:00) db_dump/db_load(./TESTDIR/secondary008.0.db:couldn't create pipe: too many open files): expected 0, got 1
FAIL:03:10:31 (00:00:00) Dump/load of ./TESTDIR/secondary008.0.db failed.
FAIL:03:10:31 (00:00:00) db_dump/db_load(./TESTDIR/secondary008.1.db:couldn't create pipe: too many open files): expected 0, got 1
FAIL:03:10:31 (00:00:00) Dump/load of ./TESTDIR/secondary008.1.db failed.
FAIL:03:12:06 (00:01:35) db_dump/db_load(./TESTDIR/primary001.db:couldn't create pipe: too many open files): expected 0, got 1
FAIL:03:12:06 (00:00:00) Dump/load of ./TESTDIR/primary001.db failed.
FAIL:03:12:06 (00:00:00) db_dump/db_load(./TESTDIR/secondary001.0.db:couldn't create pipe: too many open files): expected 0, got 1
FAIL:03:12:06 (00:00:00) Dump/load of ./TESTDIR/secondary001.0.db failed.
FAIL:03:12:06 (00:00:00) db_dump/db_load(./TESTDIR/secondary001.1.db:couldn't create pipe: too many open files): expected 0, got 1
FAIL:03:12:06 (00:00:00) Dump/load of ./TESTDIR/secondary001.1.db failed.
FAIL:03:12:34 (00:00:28) db_dump/db_load(./TESTDIR/primary002.db:couldn't create pipe: too many open files): expected 0, got 1
FAIL:03:12:34 (00:00:00) Dump/load of ./TESTDIR/primary002.db failed.
FAIL:03:12:34 (00:00:00) db_dump/db_load(./TESTDIR/secondary002.0.db:couldn't create pipe: too many open files): expected 0, got 1
FAIL:03:12:34 (00:00:00) Dump/load of ./TESTDIR/secondary002.0.db failed.
FAIL:03:12:34 (00:00:00) db_dump/db_load(./TESTDIR/secondary002.1.db:couldn't create pipe: too many open files): expected 0, got 1
FAIL:03:12:34 (00:00:00) Dump/load of ./TESTDIR/secondary002.1.db failed.
FAIL:03:12:47 (00:00:00) db_dump/db_load(./TESTDIR/primary006.db:couldn't create pipe: too many open files): expected 0, got 1
FAIL:03:12:47 (00:00:00) Dump/load of ./TESTDIR/primary006.db failed.
FAIL:03:12:47 (00:00:00) db_dump/db_load(./TESTDIR/secondary006.1.db:couldn't create pipe: too many open files): expected 0, got 1
FAIL:03:12:47 (00:00:00) Dump/load of ./TESTDIR/secondary006.1.db failed.
FAIL:03:12:47 (00:00:00) db_dump/db_load(./TESTDIR/secondary006.2.db:couldn't create pipe: too many open files): expected 0, got 1
FAIL:03:12:47 (00:00:00) Dump/load of ./TESTDIR/secondary006.2.db failed.
FAIL:03:13:10 (00:00:23) r: sindex: db open:too many open files
FAIL:06:38:47 (02:19:40) rep_process_message returned DB_NOTFOUND: No matching key/data pair found
====================================================================================
What could be the reason for the above errors while running the tcl testsuite ?
Is there any problem in berkeley db libraries that are build with above configuration?
Could you please clarify.
Thanks in advance.
Regards,
MadhuHi Sandra,
I have executed lock003 in the tclsh prompt and error occurred while executing this lock test.
========================================================
[exec] Lock003: Multi-process random lock test
[exec] Lock003.a: Create environment
[exec] Script watcher process 11571 launching lockscript.tcl process 11574.
[exec] Script watcher process 11570 launching lockscript.tcl process 11573.
[exec] Script watcher process 11572 launching lockscript.tcl process 11575.
[exec] Script watcher process 11576 launching lockscript.tcl process 11578.
[exec] Lock003.b: 5 independent processes now running
[exec] Script watcher process 11577 launching lockscript.tcl process 11597.
[exec] 06:35:39 (00:00:00) processes running: 11570 11571 11574 11572 11573 11575 11576 11578 11577 11597
[exec] 06:36:15 (00:00:36) processes running: 11570 11571 11574 11572 11573 11575 11576 11578 11577 11597
[exec] 06:36:51 (00:00:36) processes running: 11570 11571 11574 11572 11573 11575 11576 11578 11577 11597
[exec] 06:37:27 (00:00:36) processes running: 11570 11571 11574 11572 11573 11575 11576 11578 11577 11597
[exec] 06:38:03 (00:00:36) processes running: 11570 11571 11574 11572 11573 11575 11576 11578 11577 11597
[exec] 06:38:38 (00:00:35) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 06:39:12 (00:00:34) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 06:39:48 (00:00:36) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 06:40:22 (00:00:34) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 06:40:57 (00:00:35) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 06:41:32 (00:00:35) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 06:42:07 (00:00:35) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 06:42:41 (00:00:34) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 09:48:46 (00:00:35) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 09:49:20 (00:00:34) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 09:49:55 (00:00:35) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 09:50:29 (00:00:34) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 09:51:04 (00:00:35) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 09:51:39 (00:00:35) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 09:52:13 (00:00:34) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 09:52:48 (00:00:35) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 09:53:23 (00:00:35) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 09:53:58 (00:00:35) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 09:54:32 (00:00:34) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 09:55:07 (00:00:35) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 09:55:41 (00:00:34) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 09:56:16 (00:00:35) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 09:56:51 (00:00:35) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 09:57:25 (00:00:34) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 09:58:00 (00:00:35) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 09:58:34 (00:00:34) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 09:59:09 (00:00:35) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 09:59:46 (00:00:37) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 10:00:21 (00:00:35) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 10:00:56 (00:00:35) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 10:01:30 (00:00:34) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 10:02:05 (00:00:35) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 10:02:39 (00:00:34) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] 10:03:14 (00:00:35) processes running: 11571 11574 11572 11575 11576 11578 11577 11597
[exec] All processes have exited.
[exec] FAIL: error message in .out file: ./TESTDIR/lock003.0.out:FAIL:06:38:00 (00:00:00) number of other locks on 52: expected 0, got 1
[exec] FAIL: error message in .out file: ./TESTDIR/lock003.0.out:FAIL:06:38:00 (00:00:00) ../dist/../test/lockscript.tcl run: FAIL:06:38:00 (00:00:00) number of other locks on 52: expected 0, got 1: pid 11573: expected 0, got 1
===================================================================
Is this problem occur if berkeley db jars having any issues ?Why because, when berkeleydb jars (build without tcl test flags in the same environment) are used in application under high load,application is hanged because of berkeley db native api.
Sorry,I could not change ulimit value in my system because of lack of permissions.
Can you please explain what could be the reason for the above error and how to rectify it.
Thanks
Madhu -
OATM error.. while running"Generating Migration commands"
Hi Friends,
I am running 11.5.10.2 on SUn Solaris 10..10gr2 DB..I am facing a problem while running Generating Migration command using OATM menu. I am getting the following error in the log
ORA-10643: Database should be mounted in restricted mode and Exclusive mode
ORA-06512: at "SYS.DBMS_SPACE_ADMIN", line 0
ORA-06512: at "APPS.FND_TS_MIG_UTIL", line 59
ORA-06512: at line 1
After referring to ML#337890.1 and running the script to find products installed in system tablespace, I found out that theres a schema "POS" in SYSTEM tablespace.. I have successfully moved the tables and indexes corresponding to POS schema to another tablespace and changed the default tablespace of POS schema the but tablespace column in fnd_product_installations still shows "POS" schema is in SYSTEM tablespace.. and generating migration commands after moving objects is still giving the same error. Could someone please tell me why I am getting this error and if its possible to update the value in fnd_product_installations or is there an other workaround to get rid of this error
ThanksHey Hussein,
I found the following error message in the log file
[10/4/09 9:37:07 AM] [UNEXPECTED] [OPPAQMON:105266] java.sql.SQLException: No mo re data to read from socket
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:179)
at oracle.jdbc.dbaccess.DBError.check_error(DBError.java:1160)
at oracle.jdbc.ttc7.MAREngine.unmarshalUB1(MAREngine.java:961)
at oracle.jdbc.ttc7.MAREngine.unmarshalSB1(MAREngine.java:893)
at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:382)
at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1972)
at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch(TTC7Protocol.java:111 9)
at oracle.jdbc.driver.OracleStatement.executeNonQuery(OracleStatement.ja va:2185)
at oracle.jdbc.driver.OracleStatement.doExecuteOther(OracleStatement.jav a:2059)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStateme nt.java:2976)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePrepar edStatement.java:656)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStat ement.java:734)
at oracle.apps.fnd.cp.opp.OPPAQMonitor.waitForMessage(OPPAQMonitor.java: 412)
at oracle.apps.fnd.cp.opp.OPPAQMonitor.run(OPPAQMonitor.java:110)
at java.lang.Thread.run(Thread.java:534)
I checked Metalink but i dint get an hits!!
How do i solve this issue?
Thanks
Edited by: user643710 on 05-Oct-2009 11:08 -
Hi
We have a big problem, We can't create internal orders, when I run the CREATE INTERNAL ORDER, it finish with ERROR:
Concurrent Manager encountered an error while running SQL*Plus for your concurrent request 134980682.
Review your concurrent request log and/or report output file for more detailed information.
this is the log:
+---------------------------------------------------------------------------+
Purchasing: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
POCISO module: Create Internal Orders
+---------------------------------------------------------------------------+
Current system time is 26-JUL-2013 09:21:09
+---------------------------------------------------------------------------+
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
Begin create internal sales order
Updating Req Headers
14 Reqs selected for processing
Top of Fetch Loop
Source Operating Unit: 82
Selecting Currency Code
Currency Code : MXP
Selecting Order Type
Order Type ID:1001
Selecting Price List from Order Type
Deliver To Location Id: 196
Inserting Header : 3908784
Getting the customer id
Getting the customer id: 15334
Unhandled Exception : ORA-01403: no data found
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+
Concurrent Manager encountered an error while running SQL*Plus for your concurrent request 134980682.
Review your concurrent request log and/or report output file for more detailed information.
+---------------------------------------------------------------------------+
Executing request completion options...
Output file size:
78
Output is not being printed because:
The print option has been disabled for this report.
Finished executing request completion options.
+---------------------------------------------------------------------------+
Concurrent request completed
Current system time is 26-JUL-2013 09:21:14
+---------------------------------------------------------------------------+
Some suggestion for resolve it??
Thanks & Regards.In the document 294932.1 Section 4 there are no pre-installation patches or update for OS RedHat LinuxAS4.
When I type echo $LD_ASSUME_KERNEL it doesn't display any value so do I need to set the LD_Assume_Kernal value manually.
If yes, please let me know the path and command to set the kernel value.
Thanks
Amith -
Error while running batch update statement
Hi
We are experiencing the below error while running the batch update statement where in the IN clause have more than 80,000 entries. The IN clause is already handled for max 1000 values so it has multiple or clause
like update...where id in (1,2...999) OR id in (1000,1001........) OR Id in ()...
Error at Command Line:1 Column:0
Error report:
SQL Error: ORA-00603: ORACLE server session terminated by fatal error
ORA-00600: internal error code, arguments: [kghfrh:ds], [0x2A9C5ABF50], [], [], [], [], [], []
ORA-00600: internal error code, arguments: [kkoitbp-corruption], [], [], [], [], [], [], []
00603. 00000 - "ORACLE server session terminated by fatal error"
*Cause: An ORACLE server session is in an unrecoverable state.
*Action: Login to ORACLE again so a new server session will be created
Is there a limitation of oracle or some bug?
Thankshttp://download.oracle.com/docs/cd/B19306_01/server.102/b14237/limits003.htm
The limit on how long a SQL statement can be depends on many factors, including database configuration, disk space, and memoryI think you're over this limit.
The only way is creating a temporary table with all the values and using
IN (select ...)Max
http://oracleitalia.wordpress.com -
Error while running application
I am getting the following error while running application...Any help to fix this?
thanks
DeepaKarun
Application lmts-local is already deployed on other targets. Please use create-application-ref command to create reference to the specified target; requested operation cannot be completed
Exception=Deployment failed.
Deployment failed.
at org.netbeans.modules.j2ee.deployment.devmodules.api.Deployment.deploy(Deployment.java:210)
at org.netbeans.modules.j2ee.ant.Deploy.execute(Deploy.java:75)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
at org.apache.tools.ant.Task.perform(Task.java:364)
at org.apache.tools.ant.Target.execute(Target.java:341)
at org.apache.tools.ant.Target.performTasks(Target.java:369)
at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
at org.apache.tools.ant.Project.executeTargets(Project.java:1062)
at org.apache.tools.ant.module.bridge.impl.BridgeImpl.run(BridgeImpl.java:234)
at org.apache.tools.ant.module.run.TargetExecutor.run(TargetExecutor.java:242)
at org.netbeans.core.execution.RunClassThread.run(RunClassThread.java:125)
C:\Creator\Projects\lmts-local\nbproject\build-impl.xml:530: Deployment failed.
BUILD FAILED (total time: 2 seconds)I am able to identify and fix the problem....Some how even after re-installing the IDE the default server user and password fields are empty. I need to give them manually.
-
RunTime error while running Cryptotools
Hi all,
I am getting error while running the Cryptotools.exe from the command Prompt.
cryptotools credstore -add -infile <OracleBIData>/web/config/credentialstore.xml
Credential Alias: impersonation
Username: Impersonator
Password: secret
Do you want to encrypt the password? y/n (y):
Passphrase for encryption: another_secret
Do you want to write the passphrase to the xml? y/n (n):when i try to put y or n in last line.
there is one runtime error i m getting "Microsoft Visual C++ Runtime Library.
any help in this regardSounds like some DLLs might be corrupt or not the correct versions. You only need Cryptotools.exe to generate the credentialstore file. So you could generate it on another server/PC and then copy it across to the server where you have issues with cryptotools.
-
500 Internal server error while running sqlsrv_query in PHP
Hello everyone I am having a problem with sqlsrv_query I will be grateful to you please provide some help.
I am running a query through php:
$ls_parcel_query = "select * from ParcelDetail order by ExtractDate";
$result = sqlsrv_query($conn, $ls_parcel_query, array(), array("Scrollable"=>"keyset","QueryTimeout"=>300));
$no_of_rows = sqlsrv_num_rows($result);
echo "<br/>".$no_of_rows;
It gives (After 30 seconds):
500 - Internal server error.
There is a problem with the resource you are looking for, and it cannot be displayed.
I have php.ini settings like below:
max_execution_time = 90
memory_limit = 128M
While running this query in SQL SERVER 2008 R2, it successfully gives result in some times in 1 minute and sometimes in 2 minutes.Hello,
A 500 Error will be caused due to many reason.To troubleshooting this issue, you can try to check out the error log and get more information on what is causing the error.
Reference :
"500 Internal Server Error" while running PHP
HTTP Error 500 Internal server for php pages and solution
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support -
Error while running the Report
Hi ,
I am trying to run the Report in Bex Analyzer. and once I enter the value for the variable, it gives me message that "Element is not correctly define (please check query)" and when i click on the error it gives me detail message as below :
<b><b>Diagnosis
Additional elements that do not have the same dimension, such as quantities and amounts or amounts and ratios, are added to element Sales Qty Gallons .
Procedure
Check your definition.
If you still want to use this addition, you can suppress the dimensionality of one or both subexpressions by using the 'NODIM' operator. The system then interprets this or these subexpressions as nondimensional numbers.
In the executed query, you can use the Key Figure Definition function to analyze element Sales Qty Gallons .</b></b>
Now the thing is I am already using "NODIM" operator to add those elements. and I m not sure why this error is coming up now because I have created this query a while ago and it wasnt giving me any error at that time but now I have make some changes into it and it;s giving me this error while running the Report. But the thing is I didnt change anything in the element for which it;s showing me error.
Thanks,
NaitikNaitik,
There are two or more key figures in your report. They are defined by different dimensions and somewhere you have a formula with both these key figure.
Edit your query and select the Check Query icon. It will tell you which calculation you have the problem with. Edit this calculation to see which key figures are present.
If the formula is logically correct, best thing to do is to put a NODIM( ) on your key figures that make up the formula, and then change you formula to look at the NODIM( ) version.
That will fix things for you,
Regards
Gill -
Error while running a jsp page : "jasper run time error"
hii
I'm facing trouble while running some jsp page . the error is as follows:
HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: Unable to compile class for JSP
org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.java:97)
org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:346)
org.apache.jasper.compiler.Compiler.generateClass(Compiler.java:414)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:472)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:451)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:439)
org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:511)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:295)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
root cause
Unable to find a javac compiler;
com.sun.tools.javac.Main is not on the classpath.
Perhaps JAVA_HOME does not point to the JDK
org.apache.tools.ant.taskdefs.compilers.CompilerAdapterFactory.getCompiler(CompilerAdapterFactory.java:106)
org.apache.tools.ant.taskdefs.Javac.compile(Javac.java:935)
org.apache.tools.ant.taskdefs.Javac.execute(Javac.java:764)
org.apache.jasper.compiler.Compiler.generateClass(Compiler.java:382)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:472)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:451)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:439)
org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:511)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:295)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
note The full stack trace of the root cause is available in the Apache Tomcat/5.0.28 logs.
Apache Tomcat/5.0.28
The set up in my system (path set up is as follows):
Catalina home: C:\ apache software foundation\Tomcat 5.0
Classpath: %java_home%;C:\j2sdk1.4.2_03\bin;
Javahome: C:\ j2sdk1.4.2_03\jre;
path: C:\ j2sdk1.4.2_03\bin
<there are other variables available in path, along with that I have added the j2sdk1.4.2_03\bin in path".
So if u have any way out for it please let me know.I think you only need to add: c:\j2sdk1.4.2_01
you have specified jre on the end of your path, it is not the jre that is required, but the jdk.
If you are using startup.bat and shutdown.bat (or .sh on Linux) you can amend the files with a text editor (open the startup.bat in notepad), like so:
@echo off
set JAVA_HOME=c:\j2sdk1.4.2_01
if "%OS%" == "Windows_NT" setlocal
I this will start Tomcat with the correct settings, regardless of your environment settings. -
Error while running BIP report, in one of our ST environments
we are getting this exception while running one of our BIP report(RTF template).
the same code is working in the other ST environments
NOTE: we observed some special cases
if the report contain any Graph(chart) then this error is coming,
with the plain report (means only text), we observe it working fine.
could any one help, for debugging this issue
we found this log in EM console.
oracle.xdo.XDOException: java.lang.reflect.InvocationTargetException[[
at oracle.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1205)
at oracle.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:276)
at oracle.xdo.template.FOProcessor.generate(FOProcessor.java:1118)
at oracle.xdo.servlet.RTFCoreProcessor.transform(RTFCoreProcessor.java:124)
at oracle.xdo.servlet.CoreProcessor.process(CoreProcessor.java:434)
at oracle.xdo.servlet.CoreProcessor.generateDocument(CoreProcessor.java:93)
at oracle.xdo.servlet.ReportImpl.renderBodyHTTP(ReportImpl.java:1059)
at oracle.xdo.servlet.ReportImpl.renderReportBodyHTTP(ReportImpl.java:624)
at oracle.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:473)
at oracle.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:445)
at oracle.xdo.servlet.XDOServlet.doGet(XDOServlet.java:265)
at oracle.xdo.servlet.XDOServlet.doPost(XDOServlet.java:297)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.security.wls.filter.SSOSessionSynchronizationFilter.doFilter(SSOSessionSynchronizationFilter.java:277)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.xdo.servlet.metadata.track.MostRecentFilter.doFilter(MostRecentFilter.java:65)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.xdo.servlet.security.SecurityFilter.doFilter(SecurityFilter.java:122)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.xdo.servlet.init.InitCheckingFilter.doFilter(InitCheckingFilter.java:64)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by: java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.xdo.common.xml.XSLT10gR1.invokeProcessXSL(XSLT10gR1.java:917)
at oracle.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:609)
at oracle.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:327)
at oracle.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:187)
at oracle.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1181)
at oracle.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:276)
at oracle.xdo.template.FOProcessor.createFO(FOProcessor.java:1974)
at oracle.xdo.template.FOProcessor.generate(FOProcessor.java:1118)
at oracle.xdo.servlet.RTFCoreProcessor.transform(RTFCoreProcessor.java:124)
at oracle.xdo.servlet.CoreProcessor.process(CoreProcessor.java:434)
at oracle.xdo.servlet.CoreProcessor.generateDocument(CoreProcessor.java:93)
at oracle.xdo.servlet.ReportImpl.renderBodyHTTP(ReportImpl.java:1059)
at oracle.xdo.servlet.ReportImpl.renderReportBodyHTTP(ReportImpl.java:624)
at oracle.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:473)
at oracle.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:445)
at oracle.xdo.servlet.XDOServlet.doGet(XDOServlet.java:265)
at oracle.xdo.servlet.XDOServlet.doPost(XDOServlet.java:296)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.wls.filter.SSOSessionSynchronizationFilter.doFilter(SSOSessionSynchronizationFilter.java:276)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.xdo.servlet.metadata.track.MostRecentFilter.doFilter(MostRecentFilter.java:64)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.xdo.servlet.security.SecurityFilter.doFilter(SecurityFilter.java:122)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.xdo.servlet.init.InitCheckingFilter.doFilter(InitCheckingFilter.java:63)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
... 1 more
Caused by: oracle.xdo11g.xpath.XPathException: Extension function error: Error invoking 'chart_svg':'java.lang.NoClassDefFoundError: oracle/dss/graph/TickLabelCallback'
at oracle.xdo11g.xslt.XSLStylesheet.flushErrors(XSLStylesheet.java:1850)
at oracle.xdo11g.xslt.XSLStylesheet.execute(XSLStylesheet.java:616)
at oracle.xdo11g.xslt.XSLStylesheet.execute(XSLStylesheet.java:551)
at oracle.xdo11g.xslt.XSLProcessor.processXSL(XSLProcessor.java:345)
at oracle.xdo11g.xslt.XSLProcessor.processXSL(XSLProcessor.java:194)
at oracle.xdo11g.xslt.XSLProcessor.processXSL(XSLProcessor.java:230)
at oracle.xdo11g.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:124)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.xdo.common.xml.XSLT10gR1.invokeProcessXSL(XSLT10gR1.java:920)
at oracle.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:609)
at oracle.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:328)
at oracle.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:187)
at oracle.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1181)
at oracle.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:276)
at oracle.xdo.template.FOProcessor.generate(FOProcessor.java:1118)
at oracle.xdo.servlet.RTFCoreProcessor.transform(RTFCoreProcessor.java:124)
at oracle.xdo.servlet.CoreProcessor.process(CoreProcessor.java:434)
at oracle.xdo.servlet.CoreProcessor.generateDocument(CoreProcessor.java:93)
at oracle.xdo.servlet.ReportImpl.renderBodyHTTP(ReportImpl.java:1059)
at oracle.xdo.servlet.ReportImpl.renderReportBodyHTTP(ReportImpl.java:624)
at oracle.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:473)
at oracle.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:445)
at oracle.xdo.servlet.XDOServlet.doGet(XDOServlet.java:265)
at oracle.xdo.servlet.XDOServlet.doPost(XDOServlet.java:297)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.security.wls.filter.SSOSessionSynchronizationFilter.doFilter(SSOSessionSynchronizationFilter.java:277)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.xdo.servlet.metadata.track.MostRecentFilter.doFilter(MostRecentFilter.java:65)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.xdo.servlet.security.SecurityFilter.doFilter(SecurityFilter.java:122)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.xdo.servlet.init.InitCheckingFilter.doFilter(InitCheckingFilter.java:64)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
... 1 more
i observed some of the forums facing same issue but no use.
BI Beans chart - 'chart_svg' error after migration to Solaris 10
Re: Error while running displaying Charts
Could not initialize class sun.awt.X11GraphicsEnvironment
Edited by: 852973 on Dec 2, 2011 3:31 AM
Edited by: 852973 on Dec 2, 2011 3:33 AMYou might want to repost this in the Reports forum here on OTN to get a Reports Guru to help out with this.
Here's the URL for the Reports Forum: Reports
Thanks,
Rob -
We are doing EBS R12.1.1 with 11gR2 database OS platform migration from Solaris Sparc 10(64 bit) to RHEL 5.6 (64 bit),
we are following Oracle documents :-
Export/import process for R12 using 11gR1 or 11gR2 [ID 741818.1]
Application Tier Platform Migration with Oracle E-Business Suite Release 12 [ID 438086.1]
We are facing issue during Application Tier Platform Migration for following step :-
Section 2: Migration Tasks >> 7.Run AutoConfig setup phase on the Target System
Executing script in InstantiateFile:
/u01/app/applmgr/inst/apps/PRD_sebs01/admin/install/adgenjky.sh
script returned:
adgenjky.sh started at Thu Aug 23 04:31:35 PDT 2012
Creating the key
Error while creating keys
Error while running keytool
adgenjky.sh finished at Thu Aug 23 04:31:36 PDT 2012
adgenjky.sh exiting with status 1
Log file is located at : /u01/app/applmgr/inst/apps/PRD_sebs01/admin/log/PRD_sebs01jkey.log
ERRORCODE = 1 ERRORCODE_END
.end std out.
/u01/app/applmgr/inst/apps/PRD_sebs01/admin/install/adgenjky.sh: line 192: createKeysCerUsingJava: command not found
.end err out.
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: /u01/app/applmgr/inst/apps/PRD_sebs01/admin/install
adgenjky.sh INSTE8_SETUP 1
AutoConfig is exiting with status 1
AutoConfig execution completed on Thu Aug 23 04:31:50 2012
Time taken for AutoConfig execution to complete : 0 mins 36 secs/u01/app/applmgr/inst/apps/PRD_sebs01/admin/install/adgenjky.sh: line 192: createKeysCerUsingJava: command not foundHave you sourced the application env file before running AutoConfig?
Did you complete all the steps in ([ID 438086.1]), under "Verify Source and Target nodes software versions" section?
Thanks,
Hussein -
Error while running perl adpreclone.pl dbTier
Hi all,
Error while running perl adpreclone.pl dbTier
Running Rapid Clone with command...
perl /u02/app/orap/product/9.2.0/appsutil/bin/adclone.pl java=/u02/app/orap/product/9.2.0/jre/1.4.2 mode=stage stage=/u02/app/orap/product/9.2.0/appsutil/clone component=dbTier method=CUSTOM dbctx=/u02/app/orap/product/9.2.0/appsutil/DEV_XXX.xml showProgress
Beginning database tier Stage - Fri Jun 26 12:16:45 2009
APPS Password : appsdev
Log file located at /u02/app/orap/product/9.2.0/appsutil/log/DEV_jos11/StageDBTier_06261216.log
/ 75% completed
RC-50409: Topology information required for cloning not found in the database. Make sure that AutoConfig was run successfully prior to starting Rapid Clone, and try again
Raised by oracle.apps.ad.tools.AdCreateCtlFile
RC-40001: Fatal: Failed to create sql script adcrdbclone.sql for recreating control files at target
- 75% completed
ERROR while running Stage...
Checked metalink found the below solution but please the me interconnect_name is what ?
Check if the column interconnect_name from the fnd_database_instances has a value. If not, please update it with the correct value:
update FND_DATABASE_INSTANCES
set INTERCONNECT_NAME = 'xxx';
commit;
Rerun the process.
Thanks,
Bhanu Chander.Hi,
Alert log is normal.
but adcfgclone.pl log is
/u02/app/orap/product/9.2.0/appsutil/out/DEV_XXXX/dbfinfo.lst created Successfully.
Generating /u02/app/orap/product/9.2.0/appsutil/out/DEV_XXXX/addbhomsrc.xml which will contain the unique mount points
NODE_ID Column Availability: true
Node Id Column is available. dbfinfo.lst will contain the node list
Host Column Availability: true
Exception occurred while querying the datamodel: java.lang.NullPointerException
StackTrace:
java.lang.NullPointerException
at java.util.Hashtable.put(Hashtable.java:393)
at oracle.apps.ad.tools.AdCreateCtlFile.get_rac_data(AdCreateCtlFile.java:1325)
at oracle.apps.ad.tools.AdCreateCtlFile.gen_dbhomes_xml(AdCreateCtlFile.java:530)
at oracle.apps.ad.tools.AdCreateCtlFile.gen_crctrfclone_sql(AdCreateCtlFile.java:626)
at oracle.apps.ad.tools.AdCreateCtlFile.<init>(AdCreateCtlFile.java:428)
at oracle.apps.ad.clone.StageDatabase.doStage(StageDatabase.java:457)
at oracle.apps.ad.clone.StageDatabase.<init>(StageDatabase.java:266)
at oracle.apps.ad.clone.StageDBTier.<init>(StageDBTier.java:216)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:68)
at java.lang.Thread.run(Thread.java:534)
RC-50409: Topology information required for cloning not found in the database. Make sure that AutoConfig was run successfully prior to starting Rapid Clone, and try again
Raised by oracle.apps.ad.tools.AdCreateCtlFile
RC-50208: Exception in method gen_crctrfclone_sql
RC-50208: Exception in Constructor AdCreateCtlFile
Raised by oracle.apps.ad.tools.AdCreateCtlFile
StackTrace:
java.lang.Exception
at oracle.apps.ad.tools.AdCreateCtlFile.get_rac_data(AdCreateCtlFile.java:1348)
at oracle.apps.ad.tools.AdCreateCtlFile.gen_dbhomes_xml(AdCreateCtlFile.java:530)
at oracle.apps.ad.tools.AdCreateCtlFile.gen_crctrfclone_sql(AdCreateCtlFile.java:626)
at oracle.apps.ad.tools.AdCreateCtlFile.<init>(AdCreateCtlFile.java:428)
at oracle.apps.ad.clone.StageDatabase.doStage(StageDatabase.java:457)
at oracle.apps.ad.clone.StageDatabase.<init>(StageDatabase.java:266)
at oracle.apps.ad.clone.StageDBTier.<init>(StageDBTier.java:216)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:68)
at java.lang.Thread.run(Thread.java:534)
RC-40001: Failed to create sql script adcrdbclone.sql for recreating control files at target
Raised by oracle.apps.ad.clone.StageDatabase
Thanks,
Bhanu Chander -
Error while running Remote Manager for OIM11gR2
Hi,
I have 11gR2 Remote Manager configured in a Windows box on a different machine as OIM server. I am getting the below error while running the RM-
C:\RemoteManager\remote_manager>remotemanager.bat
C:\RemoteManager\remote_manager>set RM.ServiceName=RManager
C:\RemoteManager\remote_manager>set LIB_DIR=.\lib
C:\RemoteManager\remote_manager>set EXT_DIR=.\ext
C:\RemoteManager\remote_manager>set APPSERVER_TYPE=wls
C:\RemoteManager\remote_manager>set CLASSPATH=.;.\lib\xlAPI.jar;.\lib\xlVO.jar;.\lib\xlScheduler.jar;.\lib\xlRemoteManager.jar;.\lib\xerces.jar;.\lib\xlDataObjects.jar;.\lib\log4j-
1.2.8.jar;.\lib\xlUtils.jar;.\lib\xlLogger.jar;.\lib\xlCrypto.jar;.\lib\iam-platform-utils.jar;.\lib\oimclient.jar;.\ext\spring.jar;.\ext\commons-logging.jar;..\..\oracle_common\mo
dules\oracle.jrf_11.1.1\jrf-api.jar
C:\RemoteManager\remote_manager>"C:/Program Files/Java/jdk1.7.0/bin/java" -cp .;.\lib\xlAPI.jar;.\lib\xlVO.jar;.\lib\xlScheduler.jar;.\lib\xlRemoteManager.jar;.\lib\xerces.jar;.\li
b\xlDataObjects.jar;.\lib\log4j-1.2.8.jar;.\lib\xlUtils.jar;.\lib\xlLogger.jar;.\lib\xlCrypto.jar;.\lib\iam-platform-utils.jar;.\lib\oimclient.jar;.\ext\spring.jar;.\ext\commons-lo
gging.jar;..\..\oracle_common\modules\oracle.jrf_11.1.1\jrf-api.jar -Dlog4j.configuration=config\log.properties -DXL.HomeDir=C:\RemoteManager\remote_manager com.thortech.x
l.remotemanager.RemoteManager
Feb 9, 2013 2:00:54 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger info
INFO: Class/Method: RMIClientSocketFactory/static: sslEnabled : trueSSLContextAlgorithm : TLSKeyManagerFactory : @keymgrfactoryKeyStore : C:\RemoteManager\remote_manager\config\def
ault-keystore.jksKeyStoreType : JKSTrustStore : default-keystore.jks
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger info
INFO: Class/Method: RMISSLServerSocketFactory/createServerSocket Remote Manager server socket port is 12346
Exception in thread "main" java.lang.NullPointerException
at com.thortech.xl.remotemanager.RMISSLServerSocketFactory.createServerSocket(RMISSLServerSocketFactory.java:173)
at sun.rmi.transport.tcp.TCPEndpoint.newServerSocket(TCPEndpoint.java:667)
at sun.rmi.transport.tcp.TCPTransport.listen(TCPTransport.java:317)
at sun.rmi.transport.tcp.TCPTransport.exportObject(TCPTransport.java:236)
at sun.rmi.transport.tcp.TCPEndpoint.exportObject(TCPEndpoint.java:411)
at sun.rmi.transport.LiveRef.exportObject(LiveRef.java:147)
at sun.rmi.server.UnicastServerRef.exportObject(UnicastServerRef.java:207)
at java.rmi.server.UnicastRemoteObject.exportObject(UnicastRemoteObject.java:310)
at java.rmi.server.UnicastRemoteObject.exportObject(UnicastRemoteObject.java:273)
at java.rmi.server.UnicastRemoteObject.<init>(UnicastRemoteObject.java:172)
at com.thortech.xl.remotemanager.RemoteManager.<init>(RemoteManager.java:80)
at com.thortech.xl.remotemanager.RemoteManager.main(RemoteManager.java:449)
C:\RemoteManager\remote_manager>
Any suggestions?Hi,
I have 11gR2 Remote Manager configured in a Windows box on a different machine as OIM server. I am getting the below error while running the RM-
C:\RemoteManager\remote_manager>remotemanager.bat
C:\RemoteManager\remote_manager>set RM.ServiceName=RManager
C:\RemoteManager\remote_manager>set LIB_DIR=.\lib
C:\RemoteManager\remote_manager>set EXT_DIR=.\ext
C:\RemoteManager\remote_manager>set APPSERVER_TYPE=wls
C:\RemoteManager\remote_manager>set CLASSPATH=.;.\lib\xlAPI.jar;.\lib\xlVO.jar;.\lib\xlScheduler.jar;.\lib\xlRemoteManager.jar;.\lib\xerces.jar;.\lib\xlDataObjects.jar;.\lib\log4j-
1.2.8.jar;.\lib\xlUtils.jar;.\lib\xlLogger.jar;.\lib\xlCrypto.jar;.\lib\iam-platform-utils.jar;.\lib\oimclient.jar;.\ext\spring.jar;.\ext\commons-logging.jar;..\..\oracle_common\mo
dules\oracle.jrf_11.1.1\jrf-api.jar
C:\RemoteManager\remote_manager>"C:/Program Files/Java/jdk1.7.0/bin/java" -cp .;.\lib\xlAPI.jar;.\lib\xlVO.jar;.\lib\xlScheduler.jar;.\lib\xlRemoteManager.jar;.\lib\xerces.jar;.\li
b\xlDataObjects.jar;.\lib\log4j-1.2.8.jar;.\lib\xlUtils.jar;.\lib\xlLogger.jar;.\lib\xlCrypto.jar;.\lib\iam-platform-utils.jar;.\lib\oimclient.jar;.\ext\spring.jar;.\ext\commons-lo
gging.jar;..\..\oracle_common\modules\oracle.jrf_11.1.1\jrf-api.jar -Dlog4j.configuration=config\log.properties -DXL.HomeDir=C:\RemoteManager\remote_manager com.thortech.x
l.remotemanager.RemoteManager
Feb 9, 2013 2:00:54 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger info
INFO: Class/Method: RMIClientSocketFactory/static: sslEnabled : trueSSLContextAlgorithm : TLSKeyManagerFactory : @keymgrfactoryKeyStore : C:\RemoteManager\remote_manager\config\def
ault-keystore.jksKeyStoreType : JKSTrustStore : default-keystore.jks
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger info
INFO: Class/Method: RMISSLServerSocketFactory/createServerSocket Remote Manager server socket port is 12346
Exception in thread "main" java.lang.NullPointerException
at com.thortech.xl.remotemanager.RMISSLServerSocketFactory.createServerSocket(RMISSLServerSocketFactory.java:173)
at sun.rmi.transport.tcp.TCPEndpoint.newServerSocket(TCPEndpoint.java:667)
at sun.rmi.transport.tcp.TCPTransport.listen(TCPTransport.java:317)
at sun.rmi.transport.tcp.TCPTransport.exportObject(TCPTransport.java:236)
at sun.rmi.transport.tcp.TCPEndpoint.exportObject(TCPEndpoint.java:411)
at sun.rmi.transport.LiveRef.exportObject(LiveRef.java:147)
at sun.rmi.server.UnicastServerRef.exportObject(UnicastServerRef.java:207)
at java.rmi.server.UnicastRemoteObject.exportObject(UnicastRemoteObject.java:310)
at java.rmi.server.UnicastRemoteObject.exportObject(UnicastRemoteObject.java:273)
at java.rmi.server.UnicastRemoteObject.<init>(UnicastRemoteObject.java:172)
at com.thortech.xl.remotemanager.RemoteManager.<init>(RemoteManager.java:80)
at com.thortech.xl.remotemanager.RemoteManager.main(RemoteManager.java:449)
C:\RemoteManager\remote_manager>
Any suggestions?
Maybe you are looking for
-
"Errors in Task Sequence" dialog after replicating DS
I'm trying to replicate some scripts in the \Scripts folder from a Server 2008 R2 machine running MDT 2012 (update nothing) at our main office out to other servers running the same version of Windows and MDT at our remote sites. I've found that afte
-
I can no longer open my files that I have been using for years?
I can no longer open my documents that I have been using for years. "Adobe Reader could not open xxxx.jpg because it is not a supported file type or ................." Help.
-
Internal RAID Drives Disappeared from Desktop & Finder
A few days ago, one of my two internal mirrored RAID sets no longer showed on the desktop or in the Finder Sidebar. A day later, the other internal RAID set disappeared from desktop and sidebar. The two remaining internal non-RAID drives show up as d
-
Can a Flash 6 SWF (AS 1) read variables of a Captivate 4 SWF (AS 2)?
I have a Captivate 4 CP that I published to Flash Player 9, AS 2.0 SWF ( and Flash Player 7 as well, which didn't help either). I load this SWF in a Flash wrapper SWF (published to Flash Player 6, AS 1.0) which needs to read the rdinfoCurrentFrame an
-
Master Recipe details\ Inspection details based on the ECR number
HI All, Could you please help me in finding one FM which gives Master Recipe details\ Inspection details based on the ECR number which is created in CC31. In the Transaction CC31 for a given Change Number, there is a Master Recipe and Inspection in