Error while saving a document in BO 4.1

Hi Experts
I created a new report and publish it to one of our folders in BI 4.1 CMS.
I got below error
Any idea ?

Refer to SAP Note: 1970288 - Error Could not save the document to the repository for the following reason:[repo_proxy 58] when saving a report to the repository from the webi rich client
Thanks,
Prithvi

Similar Messages

  • Error while saving shipment document

    Dear Gurus,
    While saving Shipment document i am getting this error
    Transportation planning point not allowed for export shipment.
    Please note i am not doing export shipment.
    Thanks
    KS

    I have checked all the settings and have found OK.
    I am getting the above error even while making empty shipments, without deliveries.
    I have used the same shipment type & transportation planning point earlier. I did not get these error at that time. I was able to create shipment cost document and other documents.
    Please advise.
    Thanks
    KS

  • Error while saving the documents in Transactions MIRO,VA02, VA01, ects

    Hi SAP Gurus,
    i am geting an popup error while saving or after changing the documents in MIRO VA01, VA02 transactions..
    The error is  * " Condition Table Missing : Access JST1 60 ( Pricing Taxes ) " *
    can u please help me out.
    Regards
    Kumar m

    Hi,
    Found a note explaining the significance of these errors.
    It says:
    "NZE-28862: SSL connection failed
    Cause: This error occurred because the peer closed the connection.
    Action: Enable Oracle Net tracing on both sides and examine the trace output. Contact Oracle Customer support with the trace output."
    For further details you may refer the Note: 244527.1 - Explanation of "SSL call to NZ function nzos_Handshake failed" error codes
    Thanks & Regards,
    Sindhiya V.

  • Error while saving xml document in table

    I am using dbms_xmlsave.insert to
    insert records in the table.
    The procedure works fine when the xml file size is less then 1 Mb.
    But when the file size is around 4 MB
    I get the error java.lang.outofMemoryError.
    Is there any limitation of number of records that can be saved or is there any parameter or any file required to be tuned.
    null

    Try increase JAVA_POOL size or set BATCH_SIZE
    to be small.

  • An error occurred: Save document failed / An error occurred while saving the document: PATH (HDB 00055)

    Hello Colleagues, I am creating an analysis in build 576, everything goes well, the algorithm calculates the needed values, but when I try to save the analysis, I receive the following error message: "An error occurred: Save document failed / An error occurred while saving the document: <PATH> (HDB 00055)".
    Does anyone know what could cause this error message?
    Thanks a lot for any hint.
    Sergey

    Hi Henry,
    I am using PA 1.0.11 and received this error; any update on this fix for SAP PA. Does this happen for a particular data source.
    I am currently using Excel as source and whenever I try to use this data; I get this even if I move the data to a new file or rename a file. I tried to check the same issue with a different file and it works fine. This file worked fine a day back.
    Please let me know if this is unusual for this version.
    Regards,
    Arvind E

  • Error while Saving the report

    Hi,
    i have created some reports which are working fine,
    but now i am facing some errors while saving the files.
    Also the reports does show only one record while there are many records in the database.
    The error messages are as follows:
    REP-1051; Unable to save document to file ' F:\Database\Reports\report1.rdf '.
    REP-1070: Error while opening or saving a document.
    Please help me to find out the exact problem.
    Also tell me how can i show all the pages of Database records in a report( while one record on each page)

    As for the error while saving, you have only one possible thing to try. It it doesn't work, you're sunk.
    Assuming the report was not being newly created, i.e. that it was opened from a file on your system, then rename that file to something else (Report_001_OLD.rdf, for example). Then try to save it - Reports will think it is a new file to be saved rather than an existing file to be updated.
    Again, if that doesn't work, and if you do not have the auto-save option turned on, then you're sunk. You will have just lost all of the work you've put into that report.
    As you'll discover, Reports is not the most robust application ever written.

  • Error while saving INtial stock upload thru t-code MB1C

    I am getting an error while saving the entered material quantity for initial stock overload thru MB1C
    the error is "FOr object RF_BELEG GB10, number range interval 49 doesn't exist FBN1..
    I am from SD module. Please help me resolve this issue.
    THank you
    Brian

    Dear Brian
    When you are carrying out the MB1C Txn, system document for account ing for the current is not existing, so you are getting this error.
    Use FBN1 you will bet the screen Number Ranges for accounting Documents enter Your company code here "XXXX" then click the Intervals  push button,  you will go to the screen maintain number range Intervals ,  Check for 49 serial number whether you are having a number range for the current period if not then use the Insert Interval + button and enter 49 ,Year and the from  & to number ranges. You can repeat the last years no. range in the current year also.
    Best Regards
    SAM
    Edited by: samuel mendis on Apr 8, 2009 6:26 AM

  • Error while saving the excise invoice

    Hi All,
    I am getting the following error while saving the excise invoice.
    No account is specified in item 0000000001
    Message no. F5670
    Diagnosis
    No account was specified for account type "S" in item "0000000001" of the FI/CO document.
    System Response
    The Financial Accounting program cannot process the document.
    Procedure
    A system error has probably occurred in the application you called up. Check the data transferred to item "0000000001" of the FI/CO document.
    I have read all the posts with regards to the error before, however still after doing the required settings I am getting the error. Please let me know for the same.
    Kind Regards
    Atul Keshav

    Dear All,
    The issue stands resolved please find below the required settings which need to be done.
    You need to maintain the following entries in  J_1ITRNACC table
    100 DLFC 01 CR PLAAED
    100 DLFC 01 CR PLABED
    100 DLFC 01 CR PLACESS
    100 DLFC 01 CR PLASED
    100 DLFC 01 CR PLAAT1
    100 DLFC 01 CR RG23AAt1
    100 DLFC 01 CR RG23AED
    100 DLFC 01 CR RG23BED
    100 DLFC 01 CR RG23SED
    100 DLFC 01 DR MSUSP
    Also the table J_1ITRNACC should include entries for GRPO, CAPE, DIEX, EWPO,
    TR6C with subtransaction type 01.
    We need to maintain GL Accounts accordingly in the table  J_1IEXCACC.
    If still the error persists then you need to apply the following notes.
    1018071
    978186
    1032813
    The SAP note 1032813 contains the correction for the program MJ1IINF01
    you will have to apply this manually.
    Kind Regards
    Atul Keshav

  • Error while saving Reward rule version

    Hi When trying to save reward rule after creaion of rule version , error while saving rule version U-00000062 001 , contact technical support. I have attached document below. Kindly advice what needs to be done.

    Thanks for your fast reply.
    This error is occurring in our development environment as well. Production is fine.
    I had the users get out of the system last night and I tried restarting services and eventually restarting each server but nothing has cleared the error yet.

  • Error while saving ARE1 if print option is selected

    dear all ,
    i am getting below error while saving the ARE 1 document  if i select the print ARE 1 document
    if i am not selecting the document is getting posted but not able to take print out as its going for dump error
    Specify either address number or address handle(AM053)
    Kindly do needful
    THanks

    Hi ,
    thanks i have checked with my abaper . but the major problem is when tick the check box while creating the ARE 1 above issue is coming so that may be the reason why the dump is coming in the form and now when i checked for ARE 3 the same issue is coming again.
    i checked the configuration with other client related to CIN but everything is same  but the issue is only with this client.
    Regards

  • Error While Saving Workbook

    Dear All,
    We are getting following error while saving workbook. This has started after our migration from IBM server to HP Unix server.
    "Document store access caused errors in the SAP Correction System"
    Thanks in advance.
    Regards: Gaurave

    Hi,
    During the save of the workbook a transport check is done and that check fails. The reason for that is "Client independent objects not changeable in this client" Or "System is not set to changeable - objects are not changeable" The solution to the problem is "Change the setting for the system or client to "changeable". You can do this using transaction SE06 or SCC4."
    Note 992965 is relevant here.
    - RSA1 -> transport connection ->object changeability -> check the object type:XLWB(workbook)
    If the setting is 'Not Changeable', please change it  to 'Everything Changeable' by right mouse click.
    Rgds
    Manoj Kumar

  • Error while saving agreement

    Hi
    I am getting an error while saving the scheduling agreement.
    This is IS Auto related version.
    After entering all the details required in the JIT related scheduling agreement; when i am trying to save it gives error "Call usages for xxxxand JIT customer xxxxxx do not match" and the system makes an exit. Cant save the agreement
    what could be the reason.
    Priyanka

    Hello,
    Go to JITV t-code input your Sold to Party and your JIT customer ID; select that line and click on view / display details.
    Here you will have Call Type and "Usage". If the usage is E / S / M then it should be the same in your Sales Agreement.
    Go to VA31 T-code input your Sold to Party (same as JITV) and then material and other details.
    Then go to header "Sales" tab page. There you will find "Usage". This should be same as your JITV usage. E / S / M. Once this matches; then try saving the document.
    Hope this will resolve your issue;
    Regards,
    Syed Nasir

  • FA Retirement- 21151: error while posting asset document: '100000039'

    Hello Experts,
    I have a client who encountered this error during fixed asset retirement - scrapping.
    After selecting the asset to be retired, sap did not assign an account in the account column, but the user
    was able to save the document.  After saving it, the user needs to retire again another asset - scrapping, but the document would not be saved because of this error: 21151: error while posting asset document '100000039'.  The document number the systems is referring to is the last document saved but sap did not assign an account code.
    Please help. My client is using sap b1 8.81 patch5.
    Regards,
    Luz

    Hi Too Mui Hwee,
    What we did is to put letters on the number so the series will continue example there is already 100333, 100334, 100335 since the error is encountered from 100333. We add 100333A, 100334A, 100335A.
    Thanks

  • Error while detrmining Internal Document Number for Excise Invoice.

    Hello mate, I am trying to create excise invoice for for factory sale. while saving the document I am getting an error" Error
    while detrmining Internal Document Number for Excise Invoice. Message: Maintain Number Range for J_1IINTNUM". I have already maintained number range for mentioned object "J_1INTNUM" in TCODE SNUM , still getting error. Please solve my querry . Is it related to transport or number range activation or something else? I have maintained number range with serial no. "01"

    Hello ,
    Ensure that number ranges are properly maintained in the respective client that should be the year specific.Some times even u maintained the system should not consider that number ranges  due to table updation problem ,because i had faced the same in the earlier and received the reply from the sap stating that this error was occured rarely after the years,so please ignore that ,for your problem u first come out of the screen and then re log in and then create the excise invoice ,then check the number ranges .
    Please revert for any
    Kalyan

  • CAD Integration - Error While Saving file

    Hi,
    Im having One  Document type "DRW" which was working fine with all the functionalities.
    After that i created another document type "PDW". Now all the functionalities are working fine for this Document type and not for "DRW".
    Im getting an error while saving the drawing file in AutoCAD.
    For DRW Type, I can able to create a DIR. After creating DIR if i click save button im getting this error.
    RFC_SYS_EXCEPTION
    SAP RFC error
    Operation: BAPI_DOCUMENT_CHANGE2
    Group    : 104
    Key      : RFC_ERROR_SYSTEM_FAILURE
    Message  : Wrong status
    Reading titleblock data for 0000000000000010000000458/DRW/000/00...
    RFC_SYS_EXCEPTION
    SAP RFC error
    Operation: CAD_GET_TITLE_BLOCK_DATA
    Group    : 104
    Key      : RFC_ERROR_SYSTEM_FAILURE
    Message  : Wrong status
    Reading titleblock data for 0000000000000010000000458/DRW/000/00...
    RFC_SYS_EXCEPTION
    SAP RFC error
    Operation: CAD_GET_TITLE_BLOCK_DATA
    Group    : 104
    Key      : RFC_ERROR_SYSTEM_FAILURE
    Message  : Wrong status
    Reading titleblock data for 0000000000000010000000458/DRW/000/00...
    RFC_SYS_EXCEPTION
    SAP RFC error
    Operation: CAD_GET_TITLE_BLOCK_DATA
    Group    : 104
    Key      : RFC_ERROR_SYSTEM_FAILURE
    Message  : Wrong status
    Reading titleblock data for 0000000000000010000000458/DRW/000/00...
    RFC_SYS_EXCEPTION
    SAP RFC error
    Operation: CAD_GET_TITLE_BLOCK_DATA
    Group    : 104
    Key      : RFC_ERROR_SYSTEM_FAILURE
    Message  : Wrong status
    Updating document info record 0000000000000010000000458/DRW/000/00 ...
    RFC_SYS_EXCEPTION
    SAP RFC error
    Operation: BAPI_DOCUMENT_CHANGE2
    Group    : 104
    Key      : RFC_ERROR_SYSTEM_FAILURE
    Message  : Wrong status
    Command:
    Command: Conversion to JPG done.
    Checkin file into the existing storage category ZMRK ...
    E26 253 Error while checking in and storing:
    C:\SapWorkDir\AcadM\ConvertTempPath\10000000458_DR
    But there is no error in "PDW" document type.
    Anybody have any idea on this?
    Regards,
    MRK.

    Hi MRK,
    Check  the Status in DC10.
    Also make sure you have configured in dc30
    If possible send me the config file (.cfg)* to [email protected]
    I ll check n revert back...
    Have you done any settings based on document type in CFG file?
    Niranjan
    Award points if useful...
    Edited by: Niranjan Dandekar on Mar 7, 2008 1:42 PM

Maybe you are looking for