Error while sending a report via alert

Hi,
I have created an alert to send a message which includes a report link. The alert worked fine, i did receive the report via email.But then once i started creating new alerts , i started getting errors in alert launching.I checked up with the services and found out that Event engine shows up an error which is
EventEngine:Clause inconsistency between EventEngine and Satellites
Start Unloading rules.
Also i have got troubles with the user generated already and which was working well all these while. Now the error i see in Login management of Adminstrator is
Login information for "NT AUTHORITY\NETWORK SERVICE". This login is not currently known to be a valid login.
I would be really thankful if someone could help me with this.
Regards,
Lathika

Login information for "NT AUTHORITY\NETWORK SERVICE". This login is not currently known to be a valid login.
You get the above error message whenever you configure IIS to allow anonymous authentication for the web directory OracleBAM, using the NETWORK SERVICE profile for anonymous logins. You'll need to disable anonymous login for the BAM web directory.

Similar Messages

Error to send a report via mail with BI Publisher

Hello,
I am working with BIP 10.1.3.4 over Windows Server 2003 Standard Edition, and I would like to send a report via mail.
I added one Email server navigation via Admin>Delivery Configuration > Email with the server name and host.
Then Send report via Email, got error.
oracle.apps.xdo.service.delivery.DeliveryException: oracle.apps.xdo.delivery.DeliveryException: smtp
     at oracle.apps.xdo.service.delivery.impl.DeliveryServiceImpl.deliverToEmail(DeliveryServiceImpl.java:228)
     at oracle.apps.xdo.servlet.scheduler.XDOJob.deliver(XDOJob.java:1190)
     at oracle.apps.xdo.servlet.scheduler.XDOJob.execute(XDOJob.java:478)
     at org.quartz.core.JobRunShell.run(JobRunShell.java:195)
     at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520)
Caused by: oracle.apps.xdo.delivery.DeliveryException: smtp
     at oracle.apps.xdo.delivery.smtp.SMTPDeliveryRequestHandler.submitRequest(Unknown Source)
     at oracle.apps.xdo.delivery.AbstractDeliveryRequest.submit(Unknown Source)
     at oracle.apps.xdo.service.delivery.impl.DeliveryServiceImpl.deliverToEmail(DeliveryServiceImpl.java:222)
     ... 4 more
Caused by: javax.mail.NoSuchProviderException: smtp
     at javax.mail.Session.getService(Session.java:764)
     at javax.mail.Session.getTransport(Session.java:689)
     at javax.mail.Session.getTransport(Session.java:632)
     at javax.mail.Session.getTransport(Session.java:612)
     ... 7 more
I have followed this SR, and I applied the solution, but it isn't solved the issue (ID: 1072742.1)
https://support.oracle.com/CSP/ui/flash.html#tab=KBHome%28page=KBHome&id=%28%29%29,%28page=KBNavigator&id=%28from=BOOKMARK&viewingMode=1143&bmDocTitle=BI%20Publisher%20With%20JDE%20Fails%20To%20Send%20Email,%20Error:%20javax.mail.NoSuchProviderException:&bmDocID=1072742.1&bmDocType=PROBLEM&bmDocDsrc=KB%29%29
Regards,
Mónica.

Hi Christian.
You could put the lines of your list in a table of type SOLISTI1 and then use the function module SO_NEW_DOCUMENT_SEND_API1 to send the content of this table. You have to fill the table RECEIVERS with the address you want to send the report to.
Hope that helps,
Timo.

Error while sending a setpoint via DeviceNET to Brooks MFC

I was trying to send a setpoint to the Brooks MFC GF125CXXC via explicit messaging and I came up with this error.
"<Set_Attribute_Single> Error Occurred DeviceID: 01, Service Code: 0x94 General Error Code: 0x20, Additional Error Code: 0xFF Error Description: Invaid Parameter ServiceID: 0x10, ClassID: 0x33, InstanceID: 0x01, AttributeID: 0x06"
I notice set attribute in the error message and I looked into the attriute id for setting a point which is 6 and is standardised throughout all the DeviceNET devices. I also check for the service ID which is x10 to send the command. I checked if the vi was getting device ID(MAC) which was also not the reason( The vi was recering the MAC ID). I also checked for the hex conversions and everything is fine. But the vi still fails to send commands to the MFC with the same error. I am attaching the screenshot of the vi. Please review the attachments. Any help on resolving this issue?
Labview Learner
Attachments:
dneterror1.PNG ‏6 KB
dneterror2.PNG ‏33 KB

I am using NI-DNET and I am not familiar with the SST DeviceNet hardware and drivers, so I cannot comment on the code, but here are some questions:
Does this same code work with other MFCs without errors?
Can you successfully execute other explicit messages with this MFC, for example read the device type, serial number, etc... (data available via classID 0x30)
If the answer of the questions above is 'yes', you may check if the data type, data units and full scale match your expectation (usually it is INT, Counts and 0x6000)

Error while accessing Xcelsius report via LiveOffice

Hi all,
We are getting error "Persisted view cannot be loaded u2013 LO 26620" when users try to run Xcelsius dashboard having some 5-6 BEX queries in it.
The crystal reports(base for dashboards) get hanged for long and sometimes throw the error "Request timed out because there has been no reply from the server for 600,000 milliseconds".
Could somebody suggest the cause of these issues and how can we resolve them.
It is critical ,will really appreciate any advice on that.
It is version 3.1 FP 1.7
Thanks.

Hi Stratos,
We managed to resolve the issue.
Actually our BO server is a clustered one having two nodes (say NodeA and NodeB).
For each report that is used in dashboard we changed the following settings:
Default servers to use for processing:
Default servers to use for caching:
and set it to "Give preference to servers belonging to the selected group (NodeA )". Earlier we had selected "Only use servers belonging to the selected group (Node A)". That made the difference and dashboard is running fine now.
With the previous setting it was throwing the error
"Crystal_Report1" is not allowed to use Report Application Server "NodeA.ReportApplicationServer1". "NodeA.ReportApplicationServer1" is not in the specified server group."
Though issue got resolved but still it would be great if anyone can provide an insight on it.
Thanks.

Error While Genrating Test Report in Test Plan Management

Hi Guru's
I am getting an authorization error while generating test report via STWB_info.
Just i selected the test package and while click the test report i am getting this error.
Error during authorization check
Message no. TWBHS540
Guide Me to solve this issue
thanks in advance
regards
Anandh

Hi,
Please try the following:
Start transaction SMGENDOC03
Do not change anything but just hit the save button.
Afterwards restart transaction STWB_2 and try again to generate again.
Hope this helps.
Cheers
SH

Error while sending email to external mail - Urgent

Hi All,
I am getting error while sending email with attachement. The Error code is 02.
I am not able to identify the error. bold Please help me in solving this problem.
Is it anything wrong with the code or Any Configuration with SCOT/SOST.bold
the code i am using is :
REPORT YVR_F MESSAGE-ID XX .
TABLES : EDIDC, EDIDS, EDPAR.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME.
PARAMETERS : P_STATUS LIKE EDIDC-STATUS DEFAULT '51'.
SELECT-OPTIONS : S_DIRECT FOR EDIDC-DIRECT,
 S_MESTYP FOR EDIDC-MESTYP,
 S_CREDAT FOR EDIDC-CREDAT.
SELECTION-SCREEN END OF BLOCK B1 .
PARAMETER: P_EMAIL LIKE SOMLRECI1-RECEIVER,
 P_SENDER LIKE SOMLRECI1-RECEIVER no-display,
 P_DELSPL AS CHECKBOX,
 P_ONLINE NO-DISPLAY.
DATA : TB_EDIDC LIKE STANDARD TABLE OF EDIDC INITIAL SIZE 0 WITH HEADER
LINE.
DATA : TB_EDPAR LIKE STANDARD TABLE OF EDPAR INITIAL SIZE 0 WITH HEADER
LINE.
DATA : TB_KNA1 LIKE STANDARD TABLE OF KNA1 INITIAL SIZE 0 WITH HEADER
LINE.
DATA : TB_ADRC LIKE STANDARD TABLE OF ADRC INITIAL SIZE 0 WITH HEADER
LINE.
DATA: INT_PDF TYPE TABLE OF TLINE WITH HEADER LINE.
DATA : BEGIN OF TB_ED OCCURS 0,
 SNDPRN LIKE EDIDC-SNDPRN,
 LOC LIKE ADRC-BUILDING,
 DOCNUM LIKE EDIDC-DOCNUM,
 IDOCTP LIKE EDIDC-IDOCTP,
 MESTYP LIKE EDIDC-MESTYP,
 DIRECT LIKE EDIDC-DIRECT,
 CREDAT LIKE EDIDC-CREDAT,
 STATUS LIKE EDIDC-STATUS,
 END OF TB_ED.
DATA: IT_MESSAGE TYPE STANDARD TABLE OF SOLISTI1 INITIAL SIZE 0
 WITH HEADER LINE.
DATA: IT_ATTACH TYPE STANDARD TABLE OF SOLISTI1 INITIAL SIZE 0
 WITH HEADER LINE.
Job Runtime Parameters
DATA: GD_EVENTID LIKE TBTCM-EVENTID,
 GD_EVENTPARM LIKE TBTCM-EVENTPARM,
 GD_EXTERNAL_PROGRAM_ACTIVE LIKE TBTCM-XPGACTIVE,
 GD_JOBCOUNT LIKE TBTCM-JOBCOUNT,
 GD_JOBNAME LIKE TBTCM-JOBNAME,
 GD_STEPCOUNT LIKE TBTCM-STEPCOUNT,
 GD_ERROR TYPE SY-SUBRC,
 GD_RECIEVER TYPE SY-SUBRC.
DATA: W_RECSIZE TYPE I,
 W_SPOOL_NR LIKE SY-SPONO.
 %_print LIKE pri_params.
DATA: GD_SUBJECT LIKE SODOCCHGI1-OBJ_DESCR,
 IT_MESS_BOD LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
 IT_MESS_ATT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
 GD_SENDER_TYPE LIKE SOEXTRECI1-ADR_TYP,
 GD_ATTACHMENT_DESC TYPE SO_OBJ_NAM,
 GD_ATTACHMENT_NAME TYPE SO_OBJ_DES.
Spool to PDF conversions
DATA: GD_SPOOL_NR LIKE TSP01-RQIDENT,
 GD_DESTINATION LIKE RLGRAP-FILENAME,
 GD_BYTECOUNT LIKE TST01-DSIZE,
 GD_BUFFER TYPE STRING.
Binary store for PDF
DATA: BEGIN OF IT_PDF_OUTPUT OCCURS 0.
 INCLUDE STRUCTURE TLINE.
DATA: END OF IT_PDF_OUTPUT.
DATA: GD_RECSIZE TYPE I.
CONSTANTS: C_DEV LIKE SY-SYSID VALUE 'DEV',
 C_NO(1) TYPE C VALUE ' ',
 C_DEVICE(4) TYPE C VALUE 'LOCL'.
DATA: T_PACKING_LIST LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
 T_CONTENTS LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
 T_RECEIVERS LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE,
 T_ATTACHMENT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
 T_OBJECT_HEADER LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
 W_CNT TYPE I,
 W_SENT_ALL(1) TYPE C,
 W_DOC_DATA LIKE SODOCCHGI1.
DATA : MSTR_PRINT_PARMS LIKE PRI_PARAMS,
 MC_VALID,
 P_REPID LIKE SY-REPID,
 WF_ID LIKE TSP01-RQIDENT,
 LOC_BYTECOUNT TYPE I.
*start-of-selection.
MSTR_PRINT_PARMS-PDEST = 'LOCL'.
P_REPID = SY-REPID.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
 authority= ' '
 COPIES = '1'
 COVER_PAGE = SPACE
 DATA_SET = SPACE
 DEPARTMENT = SPACE
 DESTINATION = 'LP01'
 EXPIRATION = '1'
 IMMEDIATELY = 'X'
 LAYOUT = 'X_65_132'
 MODE = SPACE
 NEW_LIST_ID = 'X'
 NO_DIALOG = 'X'
 USER = SY-UNAME
IMPORTING
 OUT_PARAMETERS = MSTR_PRINT_PARMS
 VALID = MC_VALID
EXCEPTIONS
 ARCHIVE_INFO_NOT_FOUND = 1
 INVALID_PRINT_PARAMS = 2
 INVALID_ARCHIVE_PARAMS = 3
 OTHERS = 4.
 SUBMIT (P_REPID) TO SAP-SPOOL WITHOUT SPOOL DYNPRO
 SPOOL PARAMETERS MSTR_PRINT_PARMS.
 AND RETURN.
NEW-PAGE PRINT ON NO DIALOG PARAMETERS
MSTR_PRINT_PARMS.
perform data.
NEW-PAGE PRINT OFF. "This marks the end of the screen for which the
*SPOOL NO WAS GENERATED.
WF_ID = SY-SPONO.
*converting spool to pdf
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
 EXPORTING
 SRC_SPOOLID = WF_ID "SPOOL NUMBER
 NO_DIALOG = SPACE
 PDF_DESTINATION = 'X'
 IMPORTING
 PDF_BYTECOUNT =
 LOC_BYTECOUNT "NUMBER OF BYTES TRANSFERRED
 TABLES
 PDF = INT_PDF "TABLE FOR PDF REPORT
 EXCEPTIONS
 ERR_NO_ABAP_SPOOLJOB = 1
 ERR_NO_SPOOLJOB = 2
 ERR_NO_PERMISSION = 3
 ERR_CONV_NOT_POSSIBLE = 4
 ERR_BAD_DESTDEVICE = 5
 USER_CANCELLED = 6
 ERR_SPOOLERROR = 7
 ERR_TEMSEERROR = 8
 ERR_BTCJOB_OPEN_FAILED = 9
 ERR_BTCJOB_SUBMIT_FAILED = 10
 ERR_BTCJOB_CLOSE_FAILED = 11
 OTHERS = 12.
*CALL FUNCTION 'DOWNLOAD'
*EXPORTING
*bin_filesize = loc_bytecount "NO. OF BYTES
*filename = 'C:/EMAILPDF.PDF'
*filetype = 'BIN'
**IMPORTING
**act_filename = loc_filename
*TABLES
*data_tab = int_pdf.
IF P_DELSPL EQ 'X'.
PERFORM DELETE_SPOOL.
ENDIF.
Transfer the 132-long strings to 255-long strings
LOOP AT INT_PDF.
TRANSLATE INT_PDF USING ' ~'.
CONCATENATE GD_BUFFER INT_PDF INTO GD_BUFFER.
ENDLOOP.
TRANSLATE GD_BUFFER USING '~ '.
DO.
IT_MESS_ATT = GD_BUFFER.
APPEND IT_MESS_ATT.
SHIFT GD_BUFFER LEFT BY 255 PLACES.
IF GD_BUFFER IS INITIAL.
 EXIT.
ENDIF.
ENDDO.
DESCRIBE TABLE IT_MESS_ATT LINES GD_RECSIZE.
CHECK GD_RECSIZE > 0.
PERFORM SENDMAIL USING P_EMAIL..
*& Form sendmail
 text
--> p1 text
<-- p2 text
FORM SENDMAIL USING P_EMAIL.
CHECK NOT ( P_EMAIL IS INITIAL ).
REFRESH IT_MESS_BOD.
Default subject matter
GD_SUBJECT = 'Subject'.
GD_ATTACHMENT_DESC = 'IDOC LIST'.
CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
IT_MESS_BOD = 'List Of Failed Idocs'.
APPEND IT_MESS_BOD.
IT_MESS_BOD = 'List Of Failed Idocs'.
APPEND IT_MESS_BOD.
If no sender specified - default blank
IF P_SENDER EQ SPACE.
 GD_SENDER_TYPE = SPACE.
ELSE.
 GD_SENDER_TYPE = 'INT'.
ENDIF.
Send file by email as .xls speadsheet
PERFORM SEND_FILE_AS_EMAIL_ATTACHMENT
 TABLES IT_MESS_BOD
 IT_MESS_ATT
 USING P_EMAIL
 'Document attachment'
 'PDF'
 GD_ATTACHMENT_NAME
 GD_ATTACHMENT_DESC
 P_SENDER
 GD_SENDER_TYPE
 CHANGING GD_ERROR
 GD_RECIEVER.
ENDFORM. " sendmail
*& Form DELETE_SPOOL
 text
--> p1 text
<-- p2 text
FORM DELETE_SPOOL.
DATA: LD_SPOOL_NR TYPE TSP01_SP0R-RQID_CHAR.
LD_SPOOL_NR = WF_ID. "GD_SPOOL_NR.
CHECK P_DELSPL <> C_NO.
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
 EXPORTING
 SPOOLID = LD_SPOOL_NR.
ENDFORM. " DELETE_SPOOL
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
 text
 -->P_IT_MESS_BOD text
 -->P_IT_MESS_ATT text
 -->P_P_EMAIL text
 -->P_0846 text
 -->P_0847 text
 -->P_GD_ATTACHMENT_NAME text
 -->P_GD_ATTACHMENT_DESC text
 -->P_P_SENDER text
 -->P_GD_SENDER_TYPE text
 <--P_GD_ERROR text
 <--P_GD_RECIEVER text
FORM SEND_FILE_AS_EMAIL_ATTACHMENT TABLES IT_MESSAGE
 IT_ATTACH
 USING P_EMAIL
 P_MTITLE
 P_FORMAT
 P_FILENAME
 P_ATTDESCRIPTION
 P_SENDER_ADDRESS
 P_SENDER_ADDRES_TYPE
 CHANGING P_ERROR
 P_RECIEVER.
DATA: LD_ERROR TYPE SY-SUBRC,
 LD_RECIEVER TYPE SY-SUBRC,
 LD_MTITLE LIKE SODOCCHGI1-OBJ_DESCR,
 LD_EMAIL LIKE SOMLRECI1-RECEIVER,
 LD_FORMAT TYPE SO_OBJ_TP ,
 LD_ATTDESCRIPTION TYPE SO_OBJ_NAM ,
 LD_ATTFILENAME TYPE SO_OBJ_DES ,
 LD_SENDER_ADDRESS LIKE SOEXTRECI1-RECEIVER,
 LD_SENDER_ADDRESS_TYPE LIKE SOEXTRECI1-ADR_TYP,
 LD_RECEIVER LIKE SY-SUBRC.
DATA: T_PACKING_LIST LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
 T_CONTENTS LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
 T_RECEIVERS LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE,
 T_ATTACHMENT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
 T_OBJECT_HEADER LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
 W_CNT TYPE I,
 W_SENT_ALL(1) TYPE C,
 W_DOC_DATA LIKE SODOCCHGI1.
LD_EMAIL = P_EMAIL.
LD_MTITLE = P_MTITLE.
LD_FORMAT = P_FORMAT.
LD_ATTDESCRIPTION = P_ATTDESCRIPTION.
LD_ATTFILENAME = P_FILENAME.
LD_SENDER_ADDRESS = P_SENDER.
LD_SENDER_ADDRESS_TYPE = P_SENDER_ADDRES_TYPE.
Fill the document data.
W_DOC_DATA-DOC_SIZE = 1.
Populate the subject/generic message attributes
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE .
W_DOC_DATA-SENSITIVTY = 'F'.
Fill the document data and get size of attachment
CLEAR W_DOC_DATA.
READ TABLE IT_ATTACH INDEX W_CNT.
W_DOC_DATA-DOC_SIZE =
 ( W_CNT - 1 ) * 255 + STRLEN( IT_ATTACH ).
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE.
W_DOC_DATA-SENSITIVTY = 'F'.
CLEAR T_ATTACHMENT.
REFRESH T_ATTACHMENT.
T_ATTACHMENT[] = IT_ATTACH[].
Describe the body of the message
CLEAR T_PACKING_LIST.
REFRESH T_PACKING_LIST.
T_PACKING_LIST-TRANSF_BIN = SPACE.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM = 0.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE IT_MESSAGE LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE = 'RAW'.
APPEND T_PACKING_LIST.
Create attachment notification
T_PACKING_LIST-TRANSF_BIN = 'X'.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM = 1.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE T_ATTACHMENT LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE = LD_FORMAT.
T_PACKING_LIST-OBJ_DESCR = LD_ATTDESCRIPTION.
T_PACKING_LIST-OBJ_NAME = LD_ATTFILENAME.
T_PACKING_LIST-DOC_SIZE = T_PACKING_LIST-BODY_NUM * 255.
APPEND T_PACKING_LIST.
Add the recipients email address
CLEAR T_RECEIVERS.
REFRESH T_RECEIVERS.
T_RECEIVERS-RECEIVER = p_EMAIL.
T_RECEIVERS-REC_TYPE = 'U'.
T_RECEIVERS-COM_TYPE = 'INT'.
T_RECEIVERS-NOTIF_DEL = 'X'.
T_RECEIVERS-NOTIF_NDEL = 'X'.
APPEND T_RECEIVERS.
DATA: objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE.
W_SENT_ALL = 'X'.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
 EXPORTING
 DOCUMENT_DATA = W_DOC_DATA
 PUT_IN_OUTBOX = 'X'
 SENDER_ADDRESS = LD_SENDER_ADDRESS
 SENDER_ADDRESS_TYPE = LD_SENDER_ADDRESS_TYPE
 COMMIT_WORK = 'X'
 IMPORTING
 SENT_TO_ALL = W_SENT_ALL
 TABLES
 PACKING_LIST = T_PACKING_LIST
 object_header = objhead
 CONTENTS_BIN = T_ATTACHMENT
 CONTENTS_TXT = IT_MESSAGE
 RECEIVERS = T_RECEIVERS
 EXCEPTIONS
 TOO_MANY_RECEIVERS = 1
 DOCUMENT_NOT_SENT = 2
 OPERATION_NO_AUTHORIZATION = 4
 OTHERS = 99.
IF SY-SUBRC NE 0.
 MESSAGE E000 WITH 'Error occurred while sending'.
ELSE.
 MESSAGE I000 WITH 'The document was sent'.
ENDIF.
ENDFORM. " SEND_FILE_AS_EMAIL_ATTACHMENT
*& Form data
 text
--> p1 text
<-- p2 text
FORM data.
SELECT SNDPRN
 DOCNUM
 IDOCTP
 MESTYP
 DIRECT
 CREDAT
 STATUS
 FROM EDIDC
 INTO CORRESPONDING FIELDS
 OF TABLE TB_EDIDC
 WHERE STATUS = P_STATUS
 AND MESTYP IN S_MESTYP
 AND DIRECT IN S_DIRECT
 AND CREDAT IN S_CREDAT.
SELECT KUNNR
 INPNR
 FROM EDPAR
 INTO CORRESPONDING FIELDS
 OF TABLE TB_EDPAR
 FOR ALL ENTRIES IN TB_EDIDC
 WHERE KUNNR = TB_EDIDC-SNDPRN.
SELECT KUNNR
 ADRNR
 FROM KNA1
 INTO CORRESPONDING FIELDS
 OF TABLE TB_KNA1
 FOR ALL ENTRIES IN TB_EDPAR
 WHERE KUNNR = TB_EDPAR-INPNR.
SELECT ADDRNUMBER
 BUILDING
 FROM ADRC
 INTO CORRESPONDING FIELDS
 OF TABLE TB_ADRC
 FOR ALL ENTRIES IN TB_KNA1
 WHERE ADDRNUMBER = TB_KNA1-ADRNR.
LOOP AT TB_EDIDC WHERE STATUS = P_STATUS
 AND MESTYP IN S_MESTYP
 AND DIRECT IN S_DIRECT
 AND CREDAT IN S_CREDAT.
TB_ED-SNDPRN = TB_EDIDC-SNDPRN.
TB_ED-DOCNUM = TB_EDIDC-DOCNUM.
TB_ED-IDOCTP = TB_EDIDC-IDOCTP.
TB_ED-MESTYP = TB_EDIDC-MESTYP.
TB_ED-DIRECT = TB_EDIDC-DIRECT.
TB_ED-CREDAT = TB_EDIDC-CREDAT.
TB_ED-STATUS = TB_EDIDC-STATUS.
READ TABLE TB_EDPAR WITH KEY KUNNR = TB_EDIDC-SNDPRN.
READ TABLE TB_KNA1 WITH KEY KUNNR = TB_EDPAR-INPNR.
READ TABLE TB_ADRC WITH KEY ADDRNUMBER = TB_KNA1-ADRNR.
TB_ED-LOC = TB_ADRC-BUILDING.
APPEND TB_ED.
ENDLOOP.
WRITE :/02 'CustomerNo',
 15 'Location Code',
 30 'Idoc Number',
 55 'Basic Type',
 70 'Message Type',
 95 'Direction',
 110 'Received Date',
 130 'Status'.
ULINE.
LOOP AT TB_ED.
WRITE :/02 TB_ED-SNDPRN,
 15 TB_ED-LOC,
 30 TB_ED-DOCNUM,
 55 TB_ED-IDOCTP,
 70 TB_ED-MESTYP,
 95 TB_ED-DIRECT,
 110 TB_ED-CREDAT,
 130 TB_ED-STATUS.
ENDLOOP.
ENDFORM. " data
Kindly help me in solving the issue.
Thanks in advance.
Suki.

Hi,
Check in transaction SCOT. If your mail is in error status in SCOT, you can assure that there is no problem with your code. If your message has not reached till SCOT, then the problem will be with the code.
If the mail is there in scot with error status tell the BASIS to configure it. I feel this could be the problem.
Regards,
Renjith Michael.

We are facing error while executing Bex report.

Hi Gurus:
We are facing error while executing Bex report.
Messge :
u201CQuery 0: Runtime error program state check for conversation 05284411 / CP with parallel processing via RFC
Message no. DBMAN428u201D
The query is based upon Multiprovider (based upon 2 basic cubes).
Both cubes are partitioned by info object 0CALMONTH, (valid range - 01.2005 - 012.2010).
Those cubes are not containing any non-cumulative key figures and Service package level for SAP NetWeaver BI 7.0 is u2018SAPKW70012u2019.
I have checked those cubes in RSRV and carry out following steps:
"All Elementary Tests -> Transaction Data" and execute the repair "Consistency of the Time Dimension for an Info Cube"
I have found system inconsistency like u201CRecord with the DIMID 2 contains non-fitting time characteristics u201C
Detail ERROR:
Record with the DIMID 2 contains non-fitting time characteristics
Message no. RSCV053Diagnosis
The data record of the time dimension table with the described DIMID contains values for time characteristics that do not fit together.
I have found the u2018 Note 1130450 - Query displays error DBMAN 284; RSRV: Time dimension checku2019 for this but still not sure this will work or not .
I tested this in dev server , didn't feel useful.
Could you please let us know what to correct this error.
Anwser will be rewared.
Regards,

>
Surendra Pande wrote:
> Anwser will be rewared.
> Regards,
Go read the RULES of these forums.

Error while sending transaction

Hi All,
We are facing below error while sending transactions,
We are able to send successfully OAGIS file to supplier using custom documnet over internet, but in the reports after couple of sceond it showing one blank error.
EX:
Machine Info: (usstlz-pinfwi11)
Description: Unable to identify the document protocol of the message
StackTrace:
Error -: AIP-50083: Document protocol identification error
 at oracle.tip.adapter.b2b.engine.Engine.identifyDocument(Engine.java:3245)
 at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1666)
 at oracle.tip.adapter.b2b.msgproc.Request.postTransmit(Request.java:2384)
 at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1827)
 at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:976)
 at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1167)
 at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:833)
 at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:400)
 at java.lang.Thread.run(Thread.java:534)
If I check the payload it showing empty and wire message is below
Date=Tue, 23 Feb 2010 11:59:38 GMT
Server=Microsoft-IIS/6.0
X-Powered-By=ASP.NET
Content-Length=0
We are ableto receiving a MDN back from them.
Could you please tell what we need to set in below for both inbound and outbound transactions
Functional acknowledgement required?
Is acknowledgement handled by Integration B2B?
for custom document over internet...
p[lease help me to resolve this
Regards
cnu
Edited by: B2B_GoToGuY on Feb 23, 2010 4:36 AM

Anuj ,
here is the log and i send it ur ID also
Parameters
-- listing properties --
http.sender.timeout=0
2010.02.22 at 10:03:53:844: Thread-20: B2B - (DEBUG) scheme null userName null realm null
2010.02.22 at 10:03:57:590: Thread-20: B2B - (DEBUG)
Protocol = HTTP
Version = HTTP/1.1
Transport Header
Date:Mon, 22 Feb 2010 16:03:57 GMT
X-Powered-By:ASP.NET
Server:Microsoft-IIS/6.0
Content-Length:0
2010.02.22 at 10:03:57:594: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.TransportInterface:send Message Successfully Transmitted
2010.02.22 at 10:03:57:597: Thread-20: B2B - (INFORMATION) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequestPostColab Send Successful!, Request Message sucessfully Transmitted
2010.02.22 at 10:03:57:600: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequestPostColab Calling postTransmit to do post transmit processing of request message
2010.02.22 at 10:03:57:602: Thread-20: B2B - (DEBUG) DBContext beginTransaction: Enter
2010.02.22 at 10:03:57:605: Thread-20: B2B - (DEBUG) DBContext beginTransaction: Transaction.begin()
2010.02.22 at 10:03:57:607: Thread-20: B2B - (DEBUG) DBContext beginTransaction: Leave
2010.02.22 at 10:03:57:610: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:postTransmit Enter
2010.02.22 at 10:03:57:613: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:postTransmit AckMode is SYNC
2010.02.22 at 10:03:57:615: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertNativeEvtTblRow(2 params) Enter
2010.02.22 at 10:03:57:657: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertNativeEvtTblRow(2 params) Exit
2010.02.22 at 10:03:57:660: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:postTransmit Update the Message Table Row with message state Wait for Incoming Acknowledgment
2010.02.22 at 10:03:57:679: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:postTransmit Commit
2010.02.22 at 10:03:57:683: Thread-20: B2B - (DEBUG) DBContext commit: Enter
2010.02.22 at 10:03:57:690: Thread-20: B2B - (DEBUG) DBContext commit: Transaction.commit()
2010.02.22 at 10:03:57:693: Thread-20: B2B - (DEBUG) DBContext commit: Leave
2010.02.22 at 10:03:57:695: Thread-20: B2B - (DEBUG) DBContext beginTransaction: Enter
2010.02.22 at 10:03:57:697: Thread-20: B2B - (DEBUG) DBContext beginTransaction: Transaction.begin()
2010.02.22 at 10:03:57:699: Thread-20: B2B - (DEBUG) DBContext beginTransaction: Leave
2010.02.22 at 10:03:57:702: Thread-20: B2B - (INFORMATION) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Enter
2010.02.22 at 10:03:57:711: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Identify Business Protocol
2010.02.22 at 10:03:57:713: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.as2.AS2ExchangePlugin:AS2ExchangePlugin:identifyExchange Enter
2010.02.22 at 10:03:57:715: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.as2.AS2ExchangePlugin:AS2ExchangePlugin:identifyExchange Exit
2010.02.22 at 10:03:57:718: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Do Unpack using the BP specific package class
2010.02.22 at 10:03:57:721: Thread-20: B2B - (DEBUG) MimePackaging:unpack:Enter
2010.02.22 at 10:03:57:723: Thread-20: B2B - (DEBUG) MimePackaging:doUnpack:Enter
2010.02.22 at 10:03:57:726: Thread-20: B2B - (DEBUG) MimePackaging:unpackNonMimeMessage:Enter
2010.02.22 at 10:03:57:728: Thread-20: B2B - (DEBUG) MimePackaging:unpackNonMimeMessage:encoding = UTF-8
2010.02.22 at 10:03:57:731: Thread-20: B2B - (DEBUG) MimePackaging:unpackNonMimeMessage:oracle.tip.adapter.b2b.packaging.Component@7cb44d
2010.02.22 at 10:03:57:733: Thread-20: B2B - (DEBUG) MimePackaging:unpackNonMimeMessage:Exit
2010.02.22 at 10:03:57:735: Thread-20: B2B - (DEBUG) MimePackaging:unpack:Exit
2010.02.22 at 10:03:57:738: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Decode the Incoming Message into B2B Message
2010.02.22 at 10:03:57:740: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:GenericExchangePlugin:decodeIncomingMessage Enter
2010.02.22 at 10:03:57:743: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:GenericExchangePlugin:decodeIncomingMessage Number of Components = 1
2010.02.22 at 10:03:57:746: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage Transport Protocol = {HTTP}
2010.02.22 at 10:03:57:749: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage remote host name = null
2010.02.22 at 10:03:57:752: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage host name = null
2010.02.22 at 10:03:57:754: Thread-20: B2B - (DEBUG) calling setInitiatingPartyId() changing from null to TPName: null Type: Generic Identifier Value: 127.0.0.1
2010.02.22 at 10:03:57:757: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage fromParty = 127.0.0.1
2010.02.22 at 10:03:57:760: Thread-20: B2B - (DEBUG) calling setFromPartyId() changing from null to TPName: null Type: Generic Identifier Value: 127.0.0.1
2010.02.22 at 10:03:57:762: Thread-20: B2B - (DEBUG) calling setToPartyId() changing from null to TPName: null Type: Generic Identifier Value: 127.0.0.1
2010.02.22 at 10:03:57:764: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:GenericExchangePlugin:decodeIncomingMessage security info NULL
2010.02.22 at 10:03:57:767: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:GenericExchangePlugin:decodeIncomingMessage Exit
2010.02.22 at 10:03:57:770: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processHubMessage Enter
2010.02.22 at 10:03:57:772: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processHubMessage toTP 127.0.0.1
2010.02.22 at 10:03:57:775: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processHubMessage hubUrl null
2010.02.22 at 10:03:57:777: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processHubMessage Exit
2010.02.22 at 10:03:57:779: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage ProtocolCollabId = null
2010.02.22 at 10:03:57:781: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage CollaborationName null
2010.02.22 at 10:03:57:784: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:checkDuplicate Enter
2010.02.22 at 10:03:57:786: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:checkDuplicate check non-RosettaNet Message
2010.02.22 at 10:03:57:800: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:checkDuplicate Exit
2010.02.22 at 10:03:57:803: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Protocol Collaboration Id : null
2010.02.22 at 10:03:57:805: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:identifyIncomingDocument Enter
2010.02.22 at 10:03:57:893: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:identifyIncomingDocument errcode = SetData failed - CECToolsException thrown - HRESULT[30005], description[The size of blob is wrong: must be greater then zero]
2010.02.22 at 10:03:57:897: Thread-20: B2B - (ERROR) com.edifecs.shared.jni.JNIException: SetData failed - CECToolsException thrown - HRESULT[30005], description[The size of blob is wrong: must be greater then zero]
 at com.edifecs.shared.jni.xdata.INativeToXData.SetDataNative(Native Method)
 at com.edifecs.shared.jni.xdata.INativeToXData.SetData(Unknown Source)
 at com.edifecs.shared.jni.xdata.INativeToXData.SetData(Unknown Source)
 at oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin.identifyIncomingDocument(EDIDocumentPlugin.java:367)
 at oracle.tip.adapter.b2b.engine.Engine.identifyDocument(Engine.java:3226)
 at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1666)
 at oracle.tip.adapter.b2b.msgproc.Request.postTransmit(Request.java:2384)
 at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1827)
 at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:976)
 at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1167)
 at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:833)
 at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:400)
 at java.lang.Thread.run(Thread.java:534)
2010.02.22 at 10:03:57:900: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument Enter
2010.02.22 at 10:03:57:956: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument non-XML Payload
2010.02.22 at 10:03:57:958: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument iDoc ECS = null
2010.02.22 at 10:03:57:961: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument continuing
2010.02.22 at 10:03:57:964: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument non-XML Payload
2010.02.22 at 10:03:57:967: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument iDoc ECS = null
2010.02.22 at 10:03:57:970: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument could not get start pos
2010.02.22 at 10:03:57:972: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument could not get end pos
2010.02.22 at 10:03:57:975: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument non-XML Payload
2010.02.22 at 10:03:57:978: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument iDoc ECS = null
2010.02.22 at 10:03:57:981: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument continuing
2010.02.22 at 10:03:57:983: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument non-XML Payload
2010.02.22 at 10:03:57:986: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument iDoc ECS = null
2010.02.22 at 10:03:57:988: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument could not get start pos
2010.02.22 at 10:03:57:990: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument could not get end pos
2010.02.22 at 10:03:57:993: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument Exit
2010.02.22 at 10:03:58:000: Thread-20: B2B - (ERROR) Error -: AIP-50083: Document protocol identification error
 at oracle.tip.adapter.b2b.engine.Engine.identifyDocument(Engine.java:3245)
 at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1666)
 at oracle.tip.adapter.b2b.msgproc.Request.postTransmit(Request.java:2384)
 at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1827)
 at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:976)
 at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1167)
 at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:833)
 at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:400)
 at java.lang.Thread.run(Thread.java:534)
2010.02.22 at 10:03:58:004: Thread-20: B2B - (ERROR) Error -: AIP-50083: Document protocol identification error
 at oracle.tip.adapter.b2b.engine.Engine.identifyDocument(Engine.java:3245)
 at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1666)
 at oracle.tip.adapter.b2b.msgproc.Request.postTransmit(Request.java:2384)
 at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1827)
 at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:976)
 at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1167)
 at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:833)
 at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:400)
 at java.lang.Thread.run(Thread.java:534)
2010.02.22 at 10:03:58:006: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleExceptionBeforeIncomingTPA Enter
2010.02.22 at 10:03:58:009: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException Enter
2010.02.22 at 10:03:58:011: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException Error message is Error -: AIP-50083: Document protocol identification error
2010.02.22 at 10:03:58:013: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: isFARequired Enter
2010.02.22 at 10:03:58:016: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: isFARequired {Date=Mon, 22 Feb 2010 16:03:57 GMT, X-Powered-By=ASP.NET, Server=Microsoft-IIS/6.0, Content-Length=0}
2010.02.22 at 10:03:58:018: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: isFARequired returning false
2010.02.22 at 10:03:58:021: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException FA not required
2010.02.22 at 10:03:58:024: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleInboundException Updating Error Message: Error -: AIP-50083: Document protocol identification error
2010.02.22 at 10:03:58:027: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Enter
2010.02.22 at 10:03:58:030: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Wire message found
2010.02.22 at 10:03:58:032: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Creating new b2berror object
2010.02.22 at 10:03:58:036: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState enum0 not null
2010.02.22 at 10:03:58:040: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating wire message error information
2010.02.22 at 10:03:58:054: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating wire message protocol message id
2010.02.22 at 10:03:58:061: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating wire message payload storage
2010.02.22 at 10:03:58:087: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Creating new business message
2010.02.22 at 10:03:58:089: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow Enter
2010.02.22 at 10:03:58:129: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow toparty name null
2010.02.22 at 10:03:58:132: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow toparty type and value Generic Identifier127.0.0.1
2010.02.22 at 10:03:58:187: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow BusinessAction for the given name null null
2010.02.22 at 10:03:58:242: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating business message error information
2010.02.22 at 10:03:58:277: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Exit
2010.02.22 at 10:03:58:280: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleInboundException Updating Native Event Tbl Row
2010.02.22 at 10:03:58:282: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:updateNativeEvtTblRow Enter
2010.02.22 at 10:03:58:295: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateNativeEvtTblRow msgInfo.id = 0A10482B126F66BB0BC000001BE47920
2010.02.22 at 10:03:58:298: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:
** DbAccess:updateNativeEvtTblRow:tip_wireMsg protocolCollabID = null
2010.02.22 at 10:03:58:307: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleInboundException notifying App
2010.02.22 at 10:03:58:311: Thread-20: B2B - (DEBUG) Engine:notifyApp Enter
2010.02.22 at 10:03:58:324: Thread-20: B2B - (DEBUG) notifyApp:notifyApp Enqueue the ip exception message:
<Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<correlationId>null</correlationId>
<b2bMessageId>0A10482B126F66BB08B000001BE47910</b2bMessageId>
<errorCode>AIP-50083</errorCode>
<errorText>Document protocol identification error</errorText>
<errorDescription>
<![CDATA[Machine Info: (usstlz-pinfwi25.dev.emrsn.org)
Description: Unable to identify the document protocol of the message
StackTrace:
Error -: AIP-50083: Document protocol identification error
 at oracle.tip.adapter.b2b.engine.Engine.identifyDocument(Engine.java:3245)
 at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1666)
 at oracle.tip.adapter.b2b.msgproc.Request.postTransmit(Request.java:2384)
 at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1827)
 at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:976)
 at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1167)
 at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:833)
 at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:400)
 at java.lang.Thread.run(Thread.java:534)
]]>
</errorDescription>
<errorSeverity>2</errorSeverity>
</Exception>
2010.02.22 at 10:03:58:344: Thread-20: B2B - (DEBUG) Engine:notifyApp Exit
2010.02.22 at 10:03:58:347: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleInboundException Updated the Error Message Successfully: Error -: AIP-50083: Document protocol identification error
2010.02.22 at 10:03:58:350: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException Exit
2010.02.22 at 10:03:58:352: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleExceptionBeforeIncomingTPA Exit
2010.02.22 at 10:03:58:355: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:postTransmit Exit
2010.02.22 at 10:03:58:358: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequestPostColab Exit
2010.02.22 at 10:03:58:360: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequest Exit
2010.02.22 at 10:03:58:363: Thread-20: B2B - (INFORMATION) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage:
Edited by: B2B_GoToGuY on Feb 23, 2010 4:57 AM

Error while sending SMS

Hi ,
I have done the setup for SMPP Driver properties.
We have a clickatell account and registered the server IP with them.
I am getting the following error while running the BPEL process to send SMS. Please help.
Error while sending notification to 'sms:919876543210; 7074de6c8d92005d036d07190f170cb5'.
Possible causes : SDPMessaging Driver not configured; Invalid To Address is used; Email server/Messaging gateway is down; using IP address as part of email ID instead of domain name;.
Regards,
Surendra
Edited by: svsingh on Mar 18, 2010 5:09 AM

Hallo,
Possible Error Sources
●     The database is not running, or the database URL is incorrect
                -> The problem can be solved using the Visual Administrator or by a manual modification of the data-sources.xml file
●     Wrong user or password parameters
                -> The problem can be solved via the Visual Administrator or by a manual modification of the data-sources.xml file.
●     Maximum count of simultaneous connections to the database has been reached
                -> To increase the maximum number of opened connections and/or the time to wait for a new connection you should change the DataSource properties in the Visual Administrator or manually modify of the data-sources.xml file.
●     Problem with connection sharing if J2EE transaction is running
               -> The problem is caused while in an active JTA transaction there is an inappropriate attempt to open a second connection. There is either an attempt to get a second connection from an un-shareable non-XA DataSource, or an attempt to get it from another non-XA DataSource.
Br,
Rajesh Gupta.

Urgent:-REP-50152: Error while sending mail

hi
i am using reports10g. i have called a report from a form and destype=mail.
i have already mention the smtp server name in conf. file but still receiving this error
REP-50152: Error while sending mail - Sending failed; nested exception is: javax.mail.SendFailedException: Invalid Addresses; nested exception is: javax.mail.SendFailedException: 550 5.7.1 Unable to relay for [email protected]
thanks

Your smtp server forbids relaying, which is very common. Often a smtp server is configured to send only mails within the same domain without authentication. Otherwise, you need a username and password for the smtp server. I'm not sure if you can configure Reports to send mail through an authenticated server.

Terminated with error: REP-50152:Error while sending mail

Hi
Gets this error while sending report mails to external email id's
Terminated with error: REP-50152: Error while sending mail - Sending failed; nested exception is: javax.mail.SendFailedException: Invalid Addresses; nested exception is: javax.mail.SendFailedException: 550 5.7.1 Unable to relay for [email protected]
Any setting to be done in report config file?
thanks
MG

It should be like this
<pluginParam name="mailServer">%MAILSERVER_NAME%</pluginParam>
Specify the name of your mail server in the place of %MAILSERVER_NAME% above
Also make sure that this is not commented out.
Thanks,

Error while running a report

Hi all,
I am getting this particular error while running a report. The error is:
SQL Error: 604
System error in program SAPLRRK0 and form RSRDR;SRRK0F30-01-
Diagnosis
This internal error is a targeted termination since the program has an
incorrect status.
Procedure
Analyse the situation and inform SAP.
Notification Number BRAIN 299 
Could anyone tell me what that means?
Thanks In advance,
Raj

Hi Raj,
There are a few OSS Notes for your issue.
If your Query has hierarchy in it then check 734184
If your query is based on Infoset then check Note 784502 and 701941.
Also check 668921.
Bye
Dinesh

Error while opening a report in FRstudio client machine.

Hi,I'm getting below error while opening a report in FRstudio client machine. please help me if any of you resolved this issue earlier.
client laptop: 64bit windows7
hyperion version: 11.1.2.2
error msg:
"HARSnapin Initialize() Error -2147467259 - ; nested exception is:
java.rmi.UnmarshalException: error unmarshalling return; nested exception is:
java.io.InvalidClassException: com.hyperion.reporting.graphics.GridObject; local class incompatible: stream classdesc serialVersionUID = 5432192847655595077, local class serialVersionUID = -5245705824007679661"
thanks

I've seen umarshalling error when there is a difference between the client and server version. Is there a patch applied? I would recommend to uninstall the existing one and install if from Workspace. (this will ensure that you've the correct client version)
Regards
Celvin
http://www.orahyplabs.com

Error while running the Report

Hi ,
I am trying to run the Report in Bex Analyzer. and once I enter the value for the variable, it gives me message that "Element is not correctly define (please check query)" and when i click on the error it gives me detail message as below :
Diagnosis
Additional elements that do not have the same dimension, such as quantities and amounts or amounts and ratios, are added to element Sales Qty Gallons .
Procedure
Check your definition.
If you still want to use this addition, you can suppress the dimensionality of one or both subexpressions by using the 'NODIM' operator. The system then interprets this or these subexpressions as nondimensional numbers.
In the executed query, you can use the Key Figure Definition function to analyze element Sales Qty Gallons .
Now the thing is I am already using "NODIM" operator to add those elements. and I m not sure why this error is coming up now because I have created this query a while ago and it wasnt giving me any error at that time but now I have make some changes into it and it;s giving me this error while running the Report. But the thing is I didnt change anything in the element for which it;s showing me error.
Thanks,
Naitik

Naitik,
There are two or more key figures in your report. They are defined by different dimensions and somewhere you have a formula with both these key figure.
Edit your query and select the Check Query icon. It will tell you which calculation you have the problem with. Edit this calculation to see which key figures are present.
If the formula is logically correct, best thing to do is to put a NODIM( ) on your key figures that make up the formula, and then change you formula to look at the NODIM( ) version.
That will fix things for you,
Regards
Gill

Error while opening the report.

hi,
Some time i am getting "500 Internal Server Error',while executing the report.Please check the following exception and give the possible reason for getting this kind of problem.
 500 Internal Server Error
BEx Web Application
Failed to process request. Please contact your system administrator.
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator.
To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
Termination message sent
ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION
com.sap.ip.bi.base.application.exceptions.AbortMessageRuntimeException: Termination message sent
ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION
at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessageInternal(MessageManager.java:148)
at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessage(MessageManager.java:113)
Messages
ABEND: Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
ABEND: Error in BW:
System Environment
Server
BI Java Release: 7 - Patch level: 0000000009 - Description: BI Web Applications Java - Additional info: - Production mode: true
BI ABAP Release: 700 - Patch level: 0009 - Description: SAP NetWeaver BI 7.0 (BIPCLNT300) - Additional info: - Production mode: true
Java Virtual Machine Classic VM - IBM Corporation - 1.4.2
Operating System AIX - ppc64 - 5.3
Context
ACCESSIBLE false
BEx Runtime Version 1
CACHE true
CONTENT_PADDING true
COUNTRY
DEBUG false
DEBUG_LEVEL 0
DEBUG_MESSAGES false
Initial Query String BUILDTREE=false&NAVIGATIONTARGET=navurl%3A%2F%2F7b8b73fe5fd57ae6c5c1a24aed5d1ac4&NAVPATHUPDATE=false&RELATIVENAVBASE=&SAP-LAFVERSIONS=portal%3A7.0.9.0.1%3Bur%3A7.0.9.0.1&SAP-PP-CONSUMERBASEURL=3A80&SAP-PP-PRODUCERID=com.lenovo.BIP_Lenovosap&TEMPLATE=Z_WEB_CR_ZCRMOPPI_Q0032&THEME=LenovoBlueTwo
LANGUAGE en
Master System Alias BIPCLNT300
PROFILING false
RTL false
Request URL http
SAP_BW_IVIEW_ID pcd:portal_content/d029033/com..BI_Reports/com.BI_Analytics/Z_WEB_CR_ZCRMOPPI_Q0032
SAP_EXTERNAL_SID CLGF6EORaEN7Vivt8TVaQw==3eTBxzbQZSMLxB4o3h9+7w==
THEME_NAME LenovoBlueTwo
TRACE false
TRAY_TYPE PLAIN
Time Thu Oct 04 03:14:20 PDT 2007
User EPSUPPORT (USER.R3_DATASOURCE.EPSUPPORT)
Full Exception Chain
Log ID 00145ED13086005200000889000C719A00043BA80CB04B89
com.sap.ip.bi.webapplications.runtime.controller.MessageException: Error during conversion of the Web template "Z_WEB_CR_ZCRMOPPI_Q0032 from the master system at com.sap.ip.bi.webapplications.runtime.impl.Page.processRequest(Page.java:2055) at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.doProcessRequest(Controller.java:841) at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.processRequest(Controller.java:775) at com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService.handleRequest(BIRuntimeService.java:412) at com.sap.ip.bi.webapplications.runtime.jsp.portal.components.LauncherComponent.doContent(LauncherComponent.java:21) at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java(Compiled Code)) at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java(Compiled Code)) at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java(Compiled Code)) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java(Compiled Code)) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java(Compiled Code)) at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java(Compiled Code)) at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:646) at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java(Compiled Code)) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java(Compiled Code)) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java(Compiled Code)) at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753) at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240) at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java(Compiled Code)) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java(Compiled Code)) at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code)) at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java(Compiled Code)) at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code)) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java(Compiled Code)) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java(Compiled Code)) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java(Inlined Compiled Code)) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java(Compiled Code)) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java(Compiled Code)) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java(Compiled Code)) at com.sap.engine.services.httpserver.server.Client.handle(Client.java(Inlined Compiled Code)) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java(Compiled Code)) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java(Compiled Code)) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java(Compiled Code)) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code)) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code))Caused by: com.sap.ip.bi.base.exception.BIBaseRuntimeException: Error during conversion of the Web template "Z_WEB_CR_ZCRMOPPI_Q0032 from the master system at com.sap.ip.bi.webapplications.runtime.jsp.portal.service.template.PortalTemplateAccessService.getTemplateContent(PortalTemplateAccessService.java:93) at com.sap.ip.bi.webapplications.runtime.preprocessor.Preprocessor.parseTemplate(Preprocessor.java:161) at com.sap.ip.bi.webapplications.runtime.xml.XmlTemplateAssembler.doInit(XmlTemplateAssembler.java:81) at com.sap.ip.bi.webapplications.runtime.template.TemplateAssembler.init(TemplateAssembler.java:118) at com.sap.ip.bi.webapplications.runtime.base.Template.doInit(Template.java:105) at com.sap.ip.bi.webapplications.runtime.base.PageObject.init(PageObject.java:232) at com.sap.ip.bi.webapplications.runtime.base.Container.init(Container.java:46) at com.sap.ip.bi.webapplications.runtime.impl.Page.initPageObject(Page.java:3226) at com.sap.ip.bi.webapplications.runtime.impl.Page.createPageObject(Page.java:3427) at com.sap.ip.bi.webapplications.runtime.impl.Page.setTemplate(Page.java:4355) at com.sap.ip.bi.webapplications.runtime.impl.Page.doSetTemplateCommand(Page.java:4091) at sun.reflect.GeneratedMethodAccessor293.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.ip.bi.util.MethodInvoker.callMethod(MethodInvoker.java:101) at com.sap.ip.bi.webapplications.runtime.command.CommandProcessorHelper.processCommand(CommandProcessorHelper.java:410) at com.sap.ip.bi.webapplications.runtime.command.CommandProcessorHelper.processCommand(CommandProcessorHelper.java:325) at com.sap.ip.bi.webapplications.runtime.base.CommunicationProcessor.processCommand(CommunicationProcessor.java:144) at com.sap.ip.bi.webapplications.runtime.impl.Page.processCommandInternal(Page.java:1418) at com.sap.ip.bi.webapplications.runtime.impl.Page.processCommandSequence(Page.java:1713) at com.sap.ip.bi.webapplications.runtime.impl.Page.doProcessRequest(Page.java:2424) at com.sap.ip.bi.webapplications.runtime.impl.Page.processRequest(Page.java:1977) ... 38 moreCaused by: com.sap.ip.bi.deploytime.BIBaseRareSystemException: BI runtime subsystem error: Retrieve MetadataResources Failed1.4.2com.sap.ip.bi.deploytime.metadataresourcecache.MetadataResourceCache:initialize Note call hierarchy at com.sap.ip.bi.deploytime.metadataresourcecache.MetadataResourceCache.initialize(MetadataResourceCache.java:212) at com.sap.ip.bi.deploytime.BISP2Jsp.transformDTT(BISP2Jsp.java:1130) at com.sap.ip.bi.deploytime.BISP2Jsp.convert(BISP2Jsp.java:497) at com.sap.ip.bi.webapplications.runtime.jsp.portal.service.template.PortalTemplateAccessService.getTemplateContent(PortalTemplateAccessService.java:88) ... 59 moreCaused by: com.sap.ip.bi.base.application.exceptions.AbortMessageRuntimeException: Termination message sent ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION MSGV1: SAPMSSY1 MSGV3: UNCAUGHT_EXCEPTION at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessageInternal(MessageManager.java:148) at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessage(MessageManager.java:113) at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessageInternal(MessageManager.java:144) at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessage(MessageManager.java:113) at com.sap.ip.bi.base.application.service.RfcService.fillMessages(RfcService.java:221) at com.sap.ip.bi.base.application.service.RfcService.doPostProcessing(RfcService.java:171) at com.sap.ip.bi.base.application.service.rfcproxy.impl.RfcFunction.execute(RfcFunction.java(Compiled Code)) at com.sap.ip.bi.deploytime.service.validation_metadata.impl.ValidationMetadataService.getTransformData(ValidationMetadataService.java:53) at com.sap.ip.bi.deploytime.metadataresourcecache.MetadataResourceCache.initialize(MetadataResourceCache.java:196) ... 62 more
Regards,
Ravi.M

hi,
 Any suggestion for the above query.
here i am using federated portal concept,once i am opening this report in the portal only i am facing the above problem.
Regards,
Ravi.M

Error while sending a report via alert

Similar Messages

Maybe you are looking for