Error while transfering condition adapter object

In ERP I created new condition table A940 that uses also VKBUR (sales office). On CRM side I did all the steps according to Note 674538 - Copying conditions for sales office VKBUR into CRM.
When I ran object DNL_CUST_CNDALL everything was transfered ok and in CRM condition table CNCCRMPRCUS940 was created succesfully.
Next I created new adapter object to transfer entries of table 940 from ERP to CRM as copy of one of standard objects. But when I run it the load finishes with error in SMQ2 wirh the error Access via 'NULL' object reference not possible.
Any hints?

Hello Robert,
Note 1301829 should solve the issue.
thanks
Willie

Similar Messages

  • Error while transferring Forwarding settlement document to ERP Billing

    Hi Experts,
    My forwarding settlement document is consistent.
    All the basic customizing in SAP ERP, TM has been completed as follows, but getting error while transferring forwarding settlement document to ERP billing (Ref. 1st screenshot).
    I am using SAVE AND TRANSFER button to send the document to ERP, also same error is displaying while using PREVIEW INVOICE button (Ref.2nd screenshot)
    Please suggest if I missed anything to send forwarding settlement document to ERP.
    Customizing settings for transferring Forwarding settlement document to SAP ERP.
    1. In SD Billing all condition types has been maintained, pricing procedure determination configured.
    2. In SAP ERP SD condition types mapped to TM charge types using following path.
    Integration with other sap components - Transportation management - Invoice integration - Billing - Definition for transportation charge elements - Define charge types.
    3. Assignment of charge types in ERPSD
    4. Define charge category, subcategory codes
    5. Mapped ERP SD, TM sales organization with logical TM system, sales area, Order type, Billing type, Pricing procedure
    6. Output types determination configured for ERP Billing in SD

    Dear Serhat,
    I don't think this is an RFC problem or an error. But you wrote:
    When I checked why its value is 'X', I saw that if the RFC destination and the current system are the same, then lv_no_commit = 'X', (means if the R3 and the GTS are in the same server, same client.)
    It is impossible to have GTS and R/3 on the same system and same client. At least the client should be different. So try to check why the call is performed like that.
    Balazs

  • CIF Error while transferring vendor

    We are facing CIF error while transferring vendor master to APO.
    The issue is in e-mail address of the vendor master.
    One way is to correct the e-mail addresses - one per line without semicolon at the end.
    But the issue list is very huge to get it corrected.
    Is there any other way by which we can exculde the e-mail addresses or its validation?
    Thanks and regards,
    Sushant

    Hi Senthil,
    The objective was to avoid CIF error due to incorrect address setup. This required us bypass it before data transfer. We could fix this using enhancement in ECC.
    Apreciate your kind reply, though. Thanks a lot.
    Warm regards,
    Sushant

  • Getting error while creating condition type in SPRO

    Hi ,
    can somebdy tell me why i am getting the following error while creating condition type in SPRO
    No valid change license available for message /sapcnd/
    and also while rule determination using condition type we are getting the following error.
    system error:system cannot read the structure for table
    reg
    venkat

    Hi Venkat,
    Do you have the error number code!?
    Regards,
    Michel  Bohn

  • Error while creating Vacancy requisition object (NB) after upgrading EHP4

    Hi All,
    We had alreay E-Rec system with EHP2 and using last 1 year. Now based on Client requirement, we have upgrdaed to EHP4. After completing EHP4 upgradation, we are getting error while creating vacancy requisition object after all level of approval.
    Can any body help how to resolve this issue?
    Thanks in advance.
    Regards,
    Sreelatha

    Hi
    Hope SAP Note 1241014 will be useful to you.
    Best Regards
    Reddy

  • Error while using DB Adapter in BPEL process

    Hi All,
    I am getting error while using DB Adapter in BPEL process
    java.lang.Exception: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'DevDBAdapter' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. DBAdapterDemo:DevDBAdapter [ DevDBAdapter_ptt::DevDBAdapter(InputParameters,OutputParameters) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/Dev'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/Dev. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestModel.java:575) at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:381) at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:298) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.sun.el.parser.AstValue.invoke(AstValue.java:157) at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283) at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53) at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1259) at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:90) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:309) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:94) at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:97) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:90) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:309) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:94) at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:91) at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:475) at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:756) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:698) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:285) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:177) at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420) at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157) at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.emSDK.license.LicenseFilter.doFilter(LicenseFilter.java:101) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilter.java:41) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.AuditServletFilter.doFilter(AuditServletFilter.java:179) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:203) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.core.app.perf.PerfFilter.doFilter(PerfFilter.java:141) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:542) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121) at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268) at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174) at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201) at weblogic.work.ExecuteThread.run(ExecuteThread.java:173) Caused by: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'DevDBAdapter' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. DBAdapterDemo:DevDBAdapter [ DevDBAdapter_ptt::DevDBAdapter(InputParameters,OutputParameters) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/Dev'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/Dev. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.sysman.emSDK.webservices.wsdlapi.dispatch.DispatchUtil.invoke(DispatchUtil.java:260) at oracle.sysman.emSDK.webservices.wsdlparser.OperationInfoImpl.invokeWithDispatch(OperationInfoImpl.java:985) at oracle.sysman.emas.model.wsmgt.PortName.invokeOperation(PortName.java:729) at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestModel.java:569) ... 69 more Caused by: javax.xml.ws.soap.SOAPFaultException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'DevDBAdapter' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. DBAdapterDemo:DevDBAdapter [ DevDBAdapter_ptt::DevDBAdapter(InputParameters,OutputParameters) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/Dev'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/Dev. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.j2ee.ws.client.jaxws.DispatchImpl.throwJAXWSSoapFaultException(DispatchImpl.java:955) at oracle.j2ee.ws.client.jaxws.DispatchImpl.invoke(DispatchImpl.java:750) at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.synchronousInvocationWithRetry(OracleDispatchImpl.java:234) at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.invoke(OracleDispatchImpl.java:105) at oracle.sysman.emSDK.webservices.wsdlapi.dispatch.DispatchUtil.invoke(DispatchUtil.java:256) ... 72 more
    I have created jndi from console which I have mentioned in DBAdapter and I have provided details of JNDI to DbAdapter in deployment.
    I am not able to solve this.
    Can you please let me know solution for this or provide me link for tutorial of DBAdapter for stored procdure call?

    did u deploy your dbadapter through console to the plan mentioned for deployment?

  • Error while activation the Datastore Object

    Hi folks,
    I am in SAP BASIS, so not aware of BI very much...can u help me in this,
    One user is getting error while activation the Datastore Object
    below is error log,
    (Green) Activation of Objects with Type DataStore Object
    (Green) Checking Objects with Type DataStore Object
    (Green) Checking DataStore Object DSO_TEST
    (Green) DataStore object DSO_TEST is consistent
    Table/view /BIC/VDSO_TEST2 (type VIEW) from DataStore object DSO_TEST saved
    Change log for DataStore object "DSO_TEST" saved successfully
    Writing of object catalog entries (TADIR)
    (RED) The creation of the export DataSource failed
    (RED) Error during the retrieval of the logon data stored in secure storage
    (RED) Error when creating the export DataSource and dependent Objects
    (RED) Error when activating DataStore Object DSO_TEST
    Thx. in advance
    Yash

    Hi Yash,
    Check out the below thread:
    [activation of the Datastore Object.|error in ODS activation/export datasource;
    Hope it helps you!
    Please reward points if helpful
    Manish

  • Commit error while transferring Sales order Document to GTS

    Hello,
    We faced a transfer error while transferring sales order document to GTS.
    When I debugged the code function /SAPSLL/API_6800_SYNCH is called. In this function, /SAPSLL/CUHD_MAINTAIN_SINGLE is called with parameter lv_no_commit = 'X'. When I checked why its value is 'X', I saw that if the RFC destination and the current system are the same, then lv_no_commit = 'X', (means if the R3 and the GTS are in the same server, same client.) In debug mode I set the value of lv_no_commit to space, and then it works. It creates the GTS document.
    We are also transferring billing documents and it works fine. When I checked what is the difference between transferring sales order document and transferring Billing document, I saw that in the transferring billing document there is another function is called /SAPSLL/API_6800_CSD_SYNCH, and it's calling parameters(in background, as seperate unit) are different from calling parameters of /SAPSLL/API_6800_SYNCH. You can see the difference below.
    For sales document transfer :
        CALL FUNCTION '/SAPSLL/API_6800_SYNCH'
          DESTINATION cs_transfer-rfc_dest
    For billing document transfer :
        CALL FUNCTION '/SAPSLL/API_6800_CSD_SYNCH'
          IN BACKGROUND TASK
          DESTINATION cs_transfer-rfc_dest
          AS SEPARATE UNIT
    So my question is, do you think is it a sap standard program error, or is there any suitable settings in the customizing or SM59 to fix this error?
    Thanks in advance
    Serhat
    Edited by: Serhat Dirihan on Jan 22, 2009 11:46 AM

    Dear Serhat,
    I don't think this is an RFC problem or an error. But you wrote:
    When I checked why its value is 'X', I saw that if the RFC destination and the current system are the same, then lv_no_commit = 'X', (means if the R3 and the GTS are in the same server, same client.)
    It is impossible to have GTS and R/3 on the same system and same client. At least the client should be different. So try to check why the call is performed like that.
    Balazs

  • Error while using  soap adapter in webservice to sap system scenario

    Hi everybody,
    i got the error while using saop adapter in scenario(sender webservice----->sap system)
    error is
    HTTP error:couldnot post file
    '/XISOAPAdapter/MessageServlet:Channel=:BS1:SPA.&amp;
    version+3.0&amp;sender.Service=BS1&amp;interface=http%3ASP%5OUTBOUND'on server 'XI03'(500)

    check with ur basis people

  • Error while transferring file :: Error while issuing ssh command.

    Hi All,
    I am having a JSP based website application.
    I am getting the following exception in my logs.
    [ERROR] 05/04/2007 03:43:44 - Error while transferring file :: Error while issuing ssh command.
    java.net.ConnectException: Connection timed out
                at java.net.PlainSocketImpl.socketConnect(Native Method)
                at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:305)
                at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:171)
                at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:158)
                at java.net.Socket.connect(Socket.java:464)
                at java.net.Socket.connect(Socket.java:414)
                at java.net.Socket.<init>(Socket.java:310)
                at java.net.Socket.<init>(Socket.java:125)
                at com.sshtools.j2ssh.net.SocketTransportProvider.<init>(Unknown Source)
                at com.sshtools.j2ssh.net.TransportProviderFactory.connectTransportProvider(Unknown Source)
                at com.sshtools.j2ssh.SshClient.connect(Unknown Source)
                at com.sshtools.j2ssh.SshClient.connect(Unknown Source)
                at com.sshtools.j2ssh.SshClient.connect(Unknown Source)
                at com.novartis.util.DataExporter.transportFile(DataExporter.java:127)
                at com.novartis.util.DataExporter.export(DataExporter.java:101)
                at com.novartis.businessmanagers.SandosSignupManagerPojoImpl.export(SandosSignupManagerPojoImpl.java:103)
                at com.novartis.util.DataExportJob.process(DataExportJob.java:48)
                at com.novartis.util.ExclusiveJob.execute(ExclusiveJob.java:35)
                at org.quartz.core.JobRunShell.run(JobRunShell.java:191)
                at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:516)Any help would be appreciated.
    Thanks.

    This means that the SSH server you're trying to connect to isn't listening. Is the SSH server running? Are you trying to connect to the right machine?

  • Error while transferring materials from R/3 to APO

    I am getting an error while transferring materials from R/3 to APO , the error is on the SCM side and its "NOEXEC"  , the inbound queue has been blocked . what might be the problem

    Hi Raj,
    I think that you have RFC problems, you need to check this with your basis team, i give you a thread that talks about the same problem.
    Regards.
    Marí

  • BU_RELNR error while transferring a vendor from EBP to SUS

    Hi experts,
    We have EBP on one client and SUS on abother client on the same server.  SRM 5.0 and (srm server 5.5) and XI 7.0 (PI).  We could succesfully import the scenario of service procurement with supplier enablement and we are going with Extended classic scenario.
    All the XI settings are done properly and we could send the vendors from EBP to XI.  there is a problem in the inbound XML messages when it is creating a BP in SUS.  The no. ranges are maintained properly in SUS and the No. range Grouping done si fine.
    01)  We have an error in the SUS in the SXI monitor telling that:
    We found the BU_RELNR in the table NRIV is set as external and there is no table maint. for this.  We cannot uncheck external indicator.
    <?xml version="1.0" encoding="utf-8" ?>
    - <nr1:StandardMessageFault xmlns:nr1="http://sap.com/xi/SRM/Basis/Global">
    - <standard>
      <faultText>An error occured within an XI interface: Exception occurredA:R1:735 -Number range interval 01 for number range object BU_RELNR incorrectly maintain. E:BBP_BUPA:060 -Error while trying to create contact person. Inform system administration Programm: CX_BBP_BD_ERROR===============CP; Include: CX_BBP_BD_ERROR===============CM002; Line: 57</faultText>
      </standard>
      </nr1:StandardMessageFault
    02)  We are not using the bidding functionality in EBP as we are going with e-sourcing.  Hence, we will have to replicate vendors from R/3 to EBP. We set the standard communication as XML/XI and make as a portal vendor in EBP in manage business partners in the web transaction. Do we need to create contact persons in EBP and then transfer to SUS?  Will it send an automatic mail regarding the login details to the user?
    03)  Or do we need to create contact persons in SUS.  Will it send an e-mail to the vendors from SUS?
    Thanks in advance,
    DV

    Alex,
    The issue to which you have replied is to do with the namespace in XI mappings.  The standard content seems to have a bug when it got imported into the configuration.
    Coming to the e-sourcing, SAP is giving phase wise integration with ECC and SRM.  The roadmap is already SAP has delivered the xi content for E-sourcing to ECC for the master data like Material masters and vendor masters.  In general, E-sourcing is a hosted application till now.  But, there is an exception for us to have it hosted by ourselves.  There are few integration issues in this.  But, it is working fine now.  Only thing is you need to send the company codes, p orgs, p groups etc... 17 objects I guess before transferring the material master and vendor master from ECC to E-sourcing.
    Then, e-sourcing to ECC integration for contracts push, SAP is moving towards ramp-up.  This will take some time to have the GA.
    Finally, e-sourcing to SRM integration, it will happen (?????????? lot of question marks) in SRM 7.0.  Right now, we are planning to have a customer interface from e-sourcing to SRM.
    Hope these answers your question.
    Regards,
    DV

  • Error While Transferring Data rom PSA to Infocube

    Hi Experts,
                     We are Loading Data from (2LIS_11_VAHDR ) From source system .
    1. Data Transferred to PSA  .
    2. Transformation is activated.(mapping based on RSOSFIELDMAP table for transfomation)
    3. While Executing DTP we are following Error  Messages ,
    * R7105 - The Object Name is not allowed to be Empty.
                       * RSBK241 -  Error while updating to target OSD_CO3.
                       * RSBK229 - Data Package processing terminated.
    Note: Even though we are getting error messages the data is transferred to infocube
    We Need a Solution for Error ?
    Thanks,
    All.

    Hi,
    I am also got the same problem long back but i can not remeber exactly  but that is problem with transformations in the form of may be for some key figures taht currency units not updating
    or some of the fileds to info object transformations , check once again that data element and length of fields and info objects and activate once again, or just delete existed DTP , create new DTP between DS and Info cube and try to load.
    Thanks & Regards,
    Sathish

  • Error while explicit creating relation object

    Hello all ...
    i am using forms6i i.e. 'Forms [32 Bit] Version 6.0.8.8.0 (Production)'
    on Windows NT.
    it is not such a big problem, but ofcource affecting work.
    i am modifying a form that has a master block and five child blocks,
    while i am trying to create another child block with implicit relation,
    it creates block but wizard does not goes to next screen i.e to choose
    canvas etc., rather it creates only block and comes to object navigator,
    and does not create any relation and hence no associated triggers.
    even if i try to create a relation explicitly, it gives error:
    'Error while parsing join condition.'
    while i am sure the join condition is allright.
    when i tried to create a new form with exactly these blocks, it works
    fine. the situation is only arising when modifing a form.
    if anyone can suggest a solution, i'll be thankful.
    regards,
    aamir.

    Hi Yash,
    Check out the below thread:
    [activation of the Datastore Object.|error in ODS activation/export datasource;
    Hope it helps you!
    Please reward points if helpful
    Manish

  • Run Time Error  while Transferring data to Application server

    Hello Abaper's,
    I have generated a XML data using the FM : "  SAP_CONVERT_TO_XML_FORMAT ".
    While transferring the data to a File on Application Server using the statement
    DATA : wa_xmltab TYPE truxs_xml_line,
                 it_xmltab TYPE truxs_xml_table.
    OPEN DATASET FNAME FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
    IF sy-subrc EQ 0.
      LOOP AT it_xmltab INTO wa_xmltab.
        TRANSFER wa_xmltab TO FNAME.    <<<<<<<<<<<<<<  Getting Error here
      ENDLOOP.
    ELSE.
      MESSAGE e004(zmsg5) WITH 'File FNAME not opened'.
    ENDIF.
    CLOSE DATASET FNAME.
    The Run Time Error i am Facing is  
    Short text
        The current statement is only defined for character-type data objects.
    Error analysis
        For the statement
           "TRANSFER f TO ..."
        only character-type data objects are supported at the argument position
        "f".
        In this case. the operand "f" has the non-character-type "TRUXS_XML_LINE". The
        current program is a Unicode program. In the Unicode context, the type
        'X' or structures containing not only character-type components are
        regarded as non-character-type.
    Regards
    jv

    Hello  Volker Binder ,
    Thank you . it's now transferring the data to Application sercver. I forgot to try using Binay mode,
    Thers is one more problem. There are 10 Records in that internal table that is being converted to XML format,
    but the XML data is showing only first 4 records.... the XML data format for the remaining data is not seen.
    Actual  No. of Records  in Internal table :
    matnr            matkl          meins
    0-BUY1               012         PC
    0-BUY2               012         PC
    1                                EA
    2                    012         L
    3                    01          EA
    12                               EA
    23                   001         ST
    24                   015`        EA
    28                   010         EA
    29                   015`        AU
    XML Format for the above 10 fields is :
    <?xml version="1.0"?><TY_MARA><TY_MARA><MATNR Datatype="C" Length="36">0-BUY1</MATNR><MATKL Datatype="C" Length="18">012</MATKL><MEINS Datatype="C" Length="6">PC
    </MEINS>
    </TY_MARA><TY_MARA><MATNR Datatype="C" Length="36">0-BUY2</MATNR><MATKL Datatype="C" Length="18">012</MATKL><MEINS Datatype="C" Length="6">
    PC </MEINS>
    </TY_MARA><TY_MARA><MATNR Datatype="C" Length="36">000000000000000001</MATNR><MEINS Datatype="C" Length="6">EA</MEINS>
    </TY_MARA><TY_MARA><MATNR Datatype="C" Length="36">000000000000000002</MATNR
    This 4th record data in XML is also incomplete..
    The above XML format is generated only for 4 records  out of 10 Records.
    Please let me know , how can i increase the Size / Memory of the Application server file to accomodate for the reamining Records
    Regards
    Jv

Maybe you are looking for

  • Why can't I assign a particular color to an event?

    I've been using Entourage as my primary mail and calendar program for over ten years. I have an iPhone and Mobileme and think it's time to intergate everything into Mac. However, I've been disappointed by iCal. Unlike Entourage, it doesn't seem to of

  • Jasper Export to excel: changing background color of the cell/field

    Hi all, I have designed a report containing a set of 5 different fields. All these are STRING values. Among these are two fields named: BUDGETED and ACTUAL. I want to show the data corresponding to ACTUAL in red color if the value of ACTUAL is greate

  • About L2switch and PC connected to Catalyst2960S with Cate5 (2pair)

    Hi, L2switch and PC are connected to Catalyst2960S with Cate5 (2pair). NIC of L2switch or PC corresponds to 10/100/1000BASE-T. 2960S,L2switch, and PC are auto negotiation. Although the connection state of L2switch is linkdown, the connection state of

  • Safari 3: Leopard / Tiger rendering differences

    I am noticing subtle rendering differences in Safari 3 between Tiger and Leopard, is anyone else experiencing this? It appears to be related to box size calculation, as it seems to cause selected elements in one browser to not recognize certain margi

  • Need help in panelCollection skin

    Hi all, I am using JDev 11.1.1.0.2 I want to change the value of the "Detach" label of a panelCollection with "myLabel" I have created the file myskin.xml: <?xml version="1.0" encoding="windows-1252" ?> <skins xmlns="http://myfaces.apache.org/trinida