Error while udating the forecast value in M.master through RMDATIND Program

If anyone knows please respond urgently.
Thanks in advance.
Cheers
Vallabhaneni
Hi All
Good Day
In my custom Program I am using the three structures bgr00,bmm00,bmmh1 & bmmh3 and through rmdatind(Direct input method) program, i am trying to update the forecast value in material master data
and i am getting error message as Specify a tracking limit and i have taken the tracking limit as 4 in my program.
Actually there are 2 fields exists for tracking limit in structure bmmh1
1.SIGGR and
2.SIGG2
I had given the input as 4 for these 2 fields but I am getting the same error message Specify a tracking limit
Can anyone please help me in this case.
Thanks in advance.
Cheers
Vallabhaneni

debug your program.
Compare the field content of the value in the field you submitted with the content in field that is checked when message M3 456 is issued.

Similar Messages

Error while updating the forecast value in M.Master through RMDATIND

Hi All
Good Day
In my custom Program I am using the three structures bgr00,bmm00,bmmh1 & bmmh3 and through rmdatind(Direct input method) program, i am trying to update the forecast value in material master data
and i am getting error message as Specify a tracking limit and i have taken the tracking limit as 4 in my program.
Actually there are 2 fields exists for tracking limit in structure bmmh1
1.SIGGR and
2.SIGG2
I had given the input as 4 for these 2 fields but I am getting the same error message Specify a tracking limit
Can anyone please help me in this case.
Thanks in advance.
Cheers
Vallabhaneni

debug your program.
Compare the field content of the value in the field you submitted with the content in field that is checked when message M3 456 is issued.

Problem while updating the forecast value in m.master by direct input menth

Hi All
Good Day
I am updating the forecast value in material master by direct input method.
my program is working fine when I am running it online.
but when i am runnig in back ground I am getting one error which is mentioned below
                                                                                Job ZM_OPTIMIZA_UPLOAD: Data does not match the job definition; job terminated    BD    078     E
Please anyone can help ne in above case.
Thanks in advance.
Cheers
Vallabhaneni

Hi Hakim
How are you
Thanks for your valuable suggestion.
I am executing my program in background with bmv0 transaction with variant, in development I can run this job in background with out any logical errors but in QA I am getting errors.
Can you please help me in the above case.
In Bmv0 transaction first I defined the job and in program rmdatind (execute) screen first I mentioned the Max. no of logical errors as 500 and Transactions per commit unit as 500 and I run the program in background in bmv0 transaction and I am getting the message background job terminated immediately
Because of this again I changed the Max. no of logical errors 500 to 99999 and transaction per commit unit 500 to 999999 and then i scheduled my program in background.
Alomost it ran for 27 hours and then it has given the message background job terminated.
Job log entries are as follows.
22.12.2008 11:19:46 A system error has occurred while locking
22.12.2008 11:19:46 Transaction 0000040840; material number SUJ82J8400; error gravity E
22.12.2008 11:19:46 Transaction 0000040840: Taxes for sales org. cannot be transferred
22.12.2008 11:19:46 A system error has occurred while locking
22.12.2008 11:19:46 Transaction 0000040841; material number SUJ84G3001; error gravity E
22.12.2008 11:19:46 Transaction 0000040841: Taxes for sales org. cannot be transferred
22.12.2008 11:19:46 A system error has occurred while locking
22.12.2008 11:19:46 Transaction 0000040842; material number SUJ84G3002; error gravity E
22.12.2008 11:19:46 Transaction 0000040842: Taxes for sales org. cannot be transferred
22.12.2008 11:19:46 A system error has occurred while locking
22.12.2008 11:19:46 Transaction 0000040843; material number SUJ86G0100; error gravity E
22.12.2008 11:19:46 Transaction 0000040843: Taxes for sales org. cannot be transferred
22.12.2008 11:19:46 A system error has occurred while locking
22.12.2008 11:19:46 Transaction 0000040844; material number SUJ86G0300; error gravity E
22.12.2008 11:19:46 Transaction 0000040844: Taxes for sales org. cannot be transferred
22.12.2008 11:19:46 A system error has occurred while locking
22.12.2008 11:19:46 Transaction 0000040845; material number SUJ86G0900; error gravity E
22.12.2008 11:19:46 Transaction 0000040845: Taxes for sales org. cannot be transferred
22.12.2008 11:19:46 A system error has occurred while locking
22.12.2008 11:19:46 Transaction 0000040846; material number SUJ86G9600; error gravity E
22.12.2008 11:19:46 Transaction 0000040846: Taxes for sales org. cannot be transferred
22.12.2008 11:19:46 A system error has occurred while locking
22.12.2008 11:19:46 Transaction 0000040847; material number SUJ86G9601; error gravity E
22.12.2008 11:19:46 Transaction 0000040847: Taxes for sales org. cannot be transferred
22.12.2008 11:19:46 A system error has occurred while locking
22.12.2008 11:19:46 Transaction 0000040848; material number SUJ86J0000; error gravity E
22.12.2008 11:19:46 Transaction 0000040848: Taxes for sales org. cannot be transferred
22.12.2008 11:19:46 A system error has occurred while locking
22.12.2008 11:20:54 Transaction 0000040848 completed Mat. no. No. of log. errors 0000040848
22.12.2008 11:21:30 ABAP/4 processor: TSV_TNEW_PAGE_ALLOC_FAILED
22.12.2008 11:21:30 Job cancelled
I know it has taken long time to process the job because of I changed the transactions per commit unit (500 to 999999) it kills the system
But I am supposed to provide some number < 999999 in transactions per commit unit
actually I haven't tried like I said above < 999999 because i don't have any hopes.
Please look at this problem and help me in this case.
Thanks in advance.
Vallabhaneni

Problem while updating the forecast value in m.master by direct input metho

Hi Hakim
Thanks for your prompt response.
Yeah, I can see the same in St22 as you said, If I contaced the basis team for memory extension
is my problem can get solved?
and I will change the Transactions per commit unit to 100 again.
Is there anything else is causing the background job termination
really I couldn't find anything wrong in my program and it is running successfully in development client
and it is giving the message completed and
Job name Last update Current status
ZM_OPTIMIZA_FORECAST 23.12.2008 09:18:47 C Completed: job executed w/o logical errors
ZM_OPTIMIZA_FORECAST 19.12.2008 11:22:31 C Completed: job executed w/o logical errors
ZM_OPTIMIZA_FORECAST 19.12.2008 11:21:20 C Completed: job executed w/o logical errors
and the job log is as follows in development client.
23.12.2008 09:18:47 The field MARA-FORMT is not ready for input and was therefore not initialized
23.12.2008 09:18:47 The field MARA-KUNNR is not ready for input and was therefore not initialized
23.12.2008 09:18:47 The field MARA-MEINS is not ready for input and was therefore not initialized
23.12.2008 09:18:47 The field MARA-PRZUS is not ready for input and was therefore not initialized
23.12.2008 09:18:47 No changes made
23.12.2008 09:18:47 Transaction 0000000004; material number 2210017320; error gravity W
23.12.2008 09:18:47 Transaction 0000000004: Taxes for sales org. cannot be transferred
23.12.2008 09:18:47 Not possible to transfer tax data
23.12.2008 09:18:47 The field MARA-BEGRU is not ready for input and was therefore not initialized
23.12.2008 09:18:47 The field MARA-BMATN is not ready for input and was therefore not initialized
23.12.2008 09:18:47 The field MARA-FERTH is not ready for input and was therefore not initialized
23.12.2008 09:18:47 The field MARA-FORMT is not ready for input and was therefore not initialized
23.12.2008 09:18:47 The field MARA-KUNNR is not ready for input and was therefore not initialized
23.12.2008 09:18:47 The field MARA-MEINS is not ready for input and was therefore not initialized
23.12.2008 09:18:47 The field MARA-PRZUS is not ready for input and was therefore not initialized
23.12.2008 09:18:47 No changes made
23.12.2008 09:18:47 Transaction 0000000005; material number 6777295J01; error gravity W
23.12.2008 09:18:47 Transaction 0000000005: Taxes for sales org. cannot be transferred
23.12.2008 09:18:47 Not possible to transfer tax data
23.12.2008 09:18:47 The field MARA-BEGRU is not ready for input and was therefore not initialized
23.12.2008 09:18:47 The field MARA-BMATN is not ready for input and was therefore not initialized
23.12.2008 09:18:47 The field MARA-FERTH is not ready for input and was therefore not initialized
23.12.2008 09:18:47 The field MARA-FORMT is not ready for input and was therefore not initialized
23.12.2008 09:18:47 The field MARA-KUNNR is not ready for input and was therefore not initialized
23.12.2008 09:18:47 The field MARA-MEINS is not ready for input and was therefore not initialized
23.12.2008 09:18:47 The field MARA-PRZUS is not ready for input and was therefore not initialized
23.12.2008 09:18:47 No changes made
23.12.2008 09:18:47 Transaction 0000000005 completed Mat. no. T6777295J01 No. of log. errors 0000000000
23.12.2008 09:18:47 Data transfer (job 00000007) completed
23.12.2008 09:18:47 No logical (business) errors occurred
23.12.2008 09:18:47 Job finished
But in QA it is behaving totally different like i said in my earlier threat .
Thanks
Vallabhaneni

Hi Nani,
Dont open multiple threads for the same question. Im requesting you to close your threads similar to this thread.Keep only one thread open for the same issue.
Please read the Rules of Engagement in SCN.
Regards,
Hakim

Re:Error while importing the TP from dev to quality through change request

Hi Guys,
We have implemented change request and upgraded for SP 15 support pack
when the user tries to import through urgent correction by selecting pass correction to test the TP is not getting imported, when i checked the log it is saying
System cancel RFC destination SM_BQ2CLNT100_TRUSTED, Call TMW_SET_PROJECT_SWITCHES: No authorization to logon as trusted system (Trust ed RC=2).
You cannot import any requests for project BD2_P00001 at the moment
Then i went to show project status switches and changed as "Request can be imported" from " request cannot be imported", then the user is able to import the UC from the task list,
But ideally the status switches should be " request cannot be imported" so that the TP can be imported only through change request.
kindly give ur inputs as it is very urgent.
Regards
Raju

Hi Jith,
First of all try to consolidate all your objects in a single TR and then move to Q from D.
In this case check for the list of objects that you have in your TRs. If TR 3 have all the Objects that were in TR1, TR2, then transporting TR3 alone will work.
Also, you can find the information related to the elements that were missed in your TR1,TR2 by following process.
1. Go to your transport Logs and then to the entries marked as Error.
2. There you will find the Query Element Ids, copy them
3. Now, go to Table(Se16) RSZELTDIR, there enter those query elements.
Now, you can able to find the elements that you have missed in your TRs. Hope this helps you.

ORA-01438 error while inserting the BLOB value in the column

Hi All,
I have created a table with definition:
CREATE TABLE stories (id NUMBER(4), story BLOB);
Now I am trying to populate this table with some values from other table with:
insert into stories
select sensitivity_id, multi_value from sensitivity where sensitivity_id=3983021541;
Here the multi_value column from th source table is also declared as BLOB so I shlould not get this error. What kind of precision needs to be set so the query doesnt faills?
Regards,
aashish

Hi,
Can you elaorate more on this..I never tried his thing but this is just a part of big procedure where I have to do this.
Thanks,
aashish

Error while transfering the data from local to master repository

Hi , Iam Working on SAP Learning Solution Implementation,we are using LSOAE200 as a Authoring Tool. When i am Transfering the Learning Net from the authoring tool to the master repository which is in portal, I am facing the following error:
<b>Type=E, ID=NR, Number=751, Parameter='', Message='For object , number range interval does not exist'
com.sap.hcm.ls.shared.datamodel.ebo.EBOCatalogException: Type=E, ID=NR, Number=751, Parameter='', Message='For object , number range interval does not exist</b>
we are able to make it out that the error is something which is not able to find the number ranges in R/3. Can any one of you please suggest me where exactly to create the number ranges in R/3.
Regards..
Kishore

Hi,
Please check table T77IV and see whether you haver assigned a number range for the object you want to transfer the data.
Please let me know in case you require any further clarifications.
With Regards,
Kaustuv Goswami.

Automatic Picking giving error while saving the Delivery

Hi
We have done the configuration for doing automatic picking while saving the delivery.
Steps done are
1. TCode V/38
2. TCode OVLT where we have changed the Time value form 3 to 4 for Send Immediate
3. TCode VP01SHP where all shipping points are maintained.
we are getting the following error while saving the delivery.

Execute ST22 and go through the explanation given under the tab "Error analysis" and "How to correct the error". Ask your ABAP team to look into this if you are not able to find out the root cause of the issue.
G. Lakshmipathi

Getting the following error while parsing the values usng xml parser

Hi
I am getting the following error while parsing the values using the code in r12 instance on linux
declare
XML_PARSER XMLPARSER.PARSER;
DOC XMLDOM.DOMDOCUMENT;
DOCELEMENT DBMS_XMLDOM.DOMELEMENT;
BEGIN
-- NEW PARSER
XML_PARSER := XMLPARSER.NEWPARSER;
-- SET SOME CHARACTERISTICS
XMLPARSER.SETVALIDATIONMODE(XML_PARSER, FALSE);
     IF P_DIR IS NOT NULL AND P_FILENAME IS NOT NULL
     THEN
     FND_FILE.PUT_LINE(FND_FILE.LOG,'DIRECTORY FOUND'||'-'||P_DIR);
     XMLPARSER.SETBASEDIR(XML_PARSER, P_DIR);
     -- PARSE INPUT FILE
     FND_FILE.PUT_LINE(FND_FILE.LOG,'FILE FOUND'||'-'||P_FILENAME);
     XMLPARSER.PARSE(XML_PARSER, P_DIR || '/' || P_FILENAME);
     -- GET DOCUMENT
     DOC := XMLPARSER.GETDOCUMENT(XML_PARSER);
     LOAD_SUPP(doc);
     ELSE
     DBMS_OUTPUT.PUT_LINE('DIRACTORY/FILENAME CANNOT BE NULL');
     END IF;
EXCEPTION
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE('DATA NOTINSERTED'||sqlerrm);
     ROLLBACK;
END
I am getting the following error
DIRACTORYL-/home/appldevORA-0000: normal, successful completion
FILE NAME-suppliersample_data.xmlORA-0000: normal, successful completion
DATA NOTINSERTEDORA-31001: Invalid resource handle or path name "/home/appldev/suppliersample_data.xml"
ORA-06512: at "SYS.XDBURITYPE", line 11
ORA-06512: at "XDB.DBMS_XSLPROCESSOR", line 142
ORA-29280: invalid directory path
ORA-29280: invalid directory path
ORA-29280: invalid directory path
It could be great if some one could give a suggestion/solution.
Thanks
Ajesh

Besides this is not the correct forum try to google the error message first before posting:
http://ora-29280.ora-code.com/
cheers

Error while calculating the net present value

Dear experts,
Please help me in solving the following error.
I am trying to do project vaibility analysis through pre investment analysis in appropriation request, interm I'm trying to calculate the IRR for the project.
I have created the appropriation request and given all the data in that including the planed values for the project.
In Variants tab of appropriation request, preinv. analysis sub tab, i have clicked the button Calculate preinvestment analysis figures , ( I hvae not mentioned any values in that screen, its picking the plan cost from the planed values of the appropriation request) there I'm getting an error saying
Error while calculating the net present value
If I open the message it is as follows:
Error while calculating the net present value*
*Message no. AO215*
Diagnosis
An error occurred during calculation of the net present value.
The yield curve for determining the net present value is not completely maintained. Possible causes are:
1. Evaluation type IM01 does not exist (table ATSYC).
2. Yield curve types 9990 (bid) and 9991 (ask) have not been created (table JBD14) for the currency of the controlling area of the appropriation request.
3. Reference interest rates have not been created for the yield curves (tables T056R and JBD15).
4. Interest rates are not maintained for the complete planning time period for the reference interest rates.
5. Under certain circumstances, the standard exchange rate types 'G' and 'B' may be inconsistent.
Procedure
Check your Customizing settings:
1. SAP supplies the evaluation types.
Remember, SAP supplies the evaluation types in client 000. You have to copy them into your working clients. If you do not have them in your system, you can create them in Customizing for the Treasury component (Treasury Management -> Market Risk Management -> Evaluations -> Define Default Settings). Create evaluation type IM01 with bid yield curve type 9990 and ask yield curve type 9991.
2. In Customizing for appropriation requests (under Planning), create a bid yield curve type 9990 and an ask yield curve type for the currency of the controlling area of the appropriation request.
3. Create at least one reference interest rate for each yield curve.
4. Maintain the reference rates, starting at the minimum fron the point at which you you have planned costs or revenue.
5. Check Customizing of the exchange rate types 'G' and 'B' in the IMG under Global Settings -> Currencies.
I have checked all the procedures of the said customization and the values are similar to that of the error message, but still I'm unable to proceed further.
I have goe through the note 160375, but did not succeed on this issue.
Can any one help me out in solving the above error and also can any one explain me the process in SAP to calculate IRR?
Is there any more customization missing or whats wrong going in that process?
Please help me out...
Thanks in advance..
Regards,
Praveen.

Are you installing a Demo version of NetWeaver? If so please post your questions and search for answers here: SAP NetWeaver Application Server
If this a real full blown system please contact the OSS, via the Marketplace (service.sap.com) or by OSS transaction in your SAP System.

Error while loading the Web template "0ANALYSIS_PATTERN" (return value "4")

I activated all 0* objects in BTMP and checked that they are all activated, but I found errors when opening the BEx Web Analyzer
Error messages :
Error while loading the Web template "0ANALYSIS_PATTERN" (return value "4")
ERROR: Command type SWITCH_AXES of object not recognized
ERROR: Parameter GENERAL_TEXT_ELEMENT not recognized; check your metadata
So I ran RS_TEMPLATE_MAINTAIN_70 (0ANALYSIS_PATTERN) version D report to check and choose validate.
Error messages :
Template Include Item HEADER_TEMPLATE unresolved or empty. Close and reopen template.
Template Include Item FOOTER_TEMPLATE unresolved or empty. Close and reopen template.
Width of object item:GROUP_ITEM:GROUP_ITEM_1 is very small (1amp;1)
Query does not exist in the BI System (Object QU )
Cannot instantiate data provider
I also ran RS_TEMPLATE_MAINTAIN_70 (0ANALYSIS_PATTERN) version A and got the following errors:
Command type SWITCH_AXES of object not recognized
Command type SWITCH_AXES of object not recognized
Command type SWITCH_AXES of object not recognized
Parameter GENERAL_TEXT_ELEMENT not recognized; check your metadata
Parameter GENERAL_TEXT_ELEMENT of object item:GROUP_ITEM:GROUP_ITEM_1 not recognized
Command type SWITCH_AXES of object item:GROUP_ITEM:GROUP_ITEM_1 not recognized
Command type SWITCH_AXES of object item:GROUP_ITEM:GROUP_ITEM_1 not recognized
Command type SWITCH_AXES of object item:GROUP_ITEM:GROUP_ITEM_1 not recognized
Command SWITCH_AXES cannot be located in parameter ACTION
Command SWITCH_AXES cannot be located in parameter ACTION
Command SWITCH_AXES cannot be located in parameter ACTION
Parameter GENERIC_TEXT_BINDING of object item:GROUP_ITEM:GROUP_ITEM_1 cannot be higher-level node of GENERAL_TEXT_ELEMENT
Item item:GROUP_ITEM:GROUP_ITEM_1 of type DROPDOWN_ITEM cannot be a parent node of DATA_PROVIDER_REF
Item item:GROUP_ITEM:GROUP_ITEM_1 of type CHART_ITEM cannot be a parent node of VISIBLE
Item item:GROUP_ITEM:GROUP_ITEM_1 of type CHART_ITEM cannot be a parent node of LEGEND_POSITION
Item item:GROUP_ITEM:GROUP_ITEM_1 of type CHART_ITEM cannot be a parent node of LEGEND_VISIBLE
Item item:GROUP_ITEM:GROUP_ITEM_1 of type CHART_ITEM cannot be a parent node of LEGEND_ONLY
Invalid parameter value for parameter ACTION in object item:GROUP_ITEM:GROUP_ITEM_1
Invalid parameter value for parameter ACTION in object item:GROUP_ITEM:GROUP_ITEM_1
Invalid parameter value for parameter ACTION in object item:GROUP_ITEM:GROUP_ITEM_1
bi-Tag bi:item has unknown attribute key. Please check your spelling
bi-Tag bi:item has unknown attribute key. Please check your spelling
bi-Tag bi:item has unknown attribute key. Please check your spelling
bi-Tag bi:item has unknown attribute key. Please check your spelling
What could be the problem?

hi,
Please look into this note let me it helps...url=https://websmp202.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=917950&_NLANG=E]Note 917950 - SAP NetWeaver 2004s: Setting Up BEx Web[/url]
check this link as well for [<a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ca6de811-0c01-0010-43b2-c64584eef943">Bex Web Configuration</a>
wht is the SP Level?
Nagesh Ganisetti.

Error while running the Report

Hi ,
I am trying to run the Report in Bex Analyzer. and once I enter the value for the variable, it gives me message that "Element is not correctly define (please check query)" and when i click on the error it gives me detail message as below :
<b><b>Diagnosis
Additional elements that do not have the same dimension, such as quantities and amounts or amounts and ratios, are added to element Sales Qty Gallons .
Procedure
Check your definition.
If you still want to use this addition, you can suppress the dimensionality of one or both subexpressions by using the 'NODIM' operator. The system then interprets this or these subexpressions as nondimensional numbers.
In the executed query, you can use the Key Figure Definition function to analyze element Sales Qty Gallons .</b></b>
Now the thing is I am already using "NODIM" operator to add those elements. and I m not sure why this error is coming up now because I have created this query a while ago and it wasnt giving me any error at that time but now I have make some changes into it and it;s giving me this error while running the Report. But the thing is I didnt change anything in the element for which it;s showing me error.
Thanks,
Naitik

Naitik,
There are two or more key figures in your report. They are defined by different dimensions and somewhere you have a formula with both these key figure.
Edit your query and select the Check Query icon. It will tell you which calculation you have the problem with. Edit this calculation to see which key figures are present.
If the formula is logically correct, best thing to do is to put a NODIM( ) on your key figures that make up the formula, and then change you formula to look at the NODIM( ) version.
That will fix things for you,
Regards
Gill

Error : While applying the Patch 4440000

Error : While applying the Patch 4440000
FAILED: file igwprop.odf on worker 1 for product igw username IGW.
When i check the worker log file i got this error
The sequence IGW_AWARDS_S in the database is defined as:
MINVALUE = 1 MAXVALUE = 2147483647 INCREMENT BY = 1
CYCLE = NO ORDER = NO CACHE = 1000
which should be defined as:
MINVALUE = 10000 MAXVALUE = 2147483647 INCREMENT BY = 1
CYCLE = NO ORDER = NO CACHE = 1000
(Note: The cache value for sequence IGW_AWARDS_S is 20 in the ODF file. The value 1000 is being used instead because this provides better performance when selecting from the sequence.)
Alter the sequence with :
Start time for statement below is: Sun Oct 06 2013 22:16:28
ALTER SEQUENCE IGW.IGW_AWARDS_S MINVALUE 10000
AD Worker error:
The following ORACLE error:
ORA-04007: MINVALUE cannot be made to exceed the current value
occurred while executing the SQL statement:
ALTER SEQUENCE IGW.IGW_AWARDS_S MINVALUE 10000
AD Worker error:
Unable to compare or correct sequences
because of the error above
Time when worker failed: Sun Oct 06 2013 22:16:28
plz help me in solving this.

Check the current value of IGW_AWARDS_S sequence and make sure the MINVALUE in the patch (i.e. 10000) is not greater than the current one.
OERR: ORA 4007 MINVALUE cannot be made to exceed the current value (Doc ID 19824.1)
You may also log a SR.
Thanks,
Hussein

Application Error while activating the feature - for creating list content type, list definition and list instance

Dear all,
I am getting application error while enabling the feature. if any body can point out the issue - that will be helpful.
content type
<?xml version="1.0" encoding="utf-8"?>
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<Field ID="{4C1B0A21-FCE0-4CFE-8742-A250672AFE4F}" Type="Note" Name="CourseDesc" DisplayName="Course Description" Required="TRUE" Group="Training Site Columns"/>

<ContentType ID="0x0100d57ecc53fde34177b096abd0ec90a8f9"
Name="TrainingCourses"
Group="Training Content Types"
Description="Defines a Course"
Inherits="TRUE"
Version="0">
<FieldRefs>
<FieldRef ID="{4C1B0A21-FCE0-4CFE-8742-A250672AFE4F}" Name="CourseDesc" DisplayName="Course Description" Required="TRUE"/>
</FieldRefs>
</ContentType>
</Elements>
List definition
<?xml version="1.0" encoding="utf-8"?>
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">

<ListTemplate
Name="TrainingCourses"
Type="10100"
BaseType="0"
OnQuickLaunch="TRUE"
SecurityBits="11"
Sequence="410"
DisplayName="TrainingCourses"
Description="Training Courses List Definition"
Image="/_layouts/images/itgen.png"/>
</Elements>
List instance
<?xml version="1.0" encoding="utf-8"?>
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<ListInstance Title="TrainingCourses"
OnQuickLaunch="TRUE"
TemplateType="10100"
Url="Lists/TrainingCourses"
Description="Training Course List Instance">
</ListInstance>
</Elements>
schema
<?xml version="1.0" encoding="utf-8"?>
<List xmlns:ows="Microsoft SharePoint" Title="TrainingCourses" FolderCreation="FALSE" Direction="$Resources:Direction;" Url="Lists/TrainingCourses-LD_TrainingCourses" BaseType="0" xmlns="http://schemas.microsoft.com/sharepoint/">
<MetaData>
<ContentTypes>
<ContentType ID="0x0100d57ecc53fde34177b096abd0ec90a8f9" Name="TrainingCourses" Group="Training Content Types" Description="Defines a Course" Inherits="TRUE" Version="0">
<FieldRefs>
<FieldRef ID="{4C1B0A21-FCE0-4CFE-8742-A250672AFE4F}" Name="CourseDesc" DisplayName="Course Description" Required="TRUE" />
</FieldRefs>
</ContentType>
</ContentTypes>
<Fields>
<Field ID="{4c1b0a21-fce0-4cfe-8742-a250672afe4f}" Type="Note" Name="CourseDesc" DisplayName="Course Description" Required="TRUE" Group="Training Site Columns" />
</Fields>
<Views>
<View BaseViewID="0" Type="HTML" MobileView="TRUE" TabularView="FALSE">
<Toolbar Type="Standard" />
<XslLink Default="TRUE">main.xsl</XslLink>
<RowLimit Paged="TRUE">30</RowLimit>
<ViewFields>
<FieldRef Name="LinkTitleNoMenu">
</FieldRef>
<FieldRef Name="CourseDesc">
</FieldRef>
</ViewFields>
<Query>
<OrderBy>
<FieldRef Name="Modified" Ascending="FALSE">
</FieldRef>
</OrderBy>
</Query>
<ParameterBindings>
<ParameterBinding Name="AddNewAnnouncement" Location="Resource(wss,addnewitem)" />
<ParameterBinding Name="NoAnnouncements" Location="Resource(wss,noXinviewofY_LIST)" />
<ParameterBinding Name="NoAnnouncementsHowTo" Location="Resource(wss,noXinviewofY_ONET_HOME)" />
</ParameterBindings>
</View>
<View BaseViewID="1" Type="HTML" WebPartZoneID="Main" DisplayName="$Resources:core,objectiv_schema_mwsidcamlidC24;" DefaultView="TRUE" MobileView="TRUE" MobileDefaultView="TRUE" SetupPath="pages\viewpage.aspx" ImageUrl="/_layouts/images/generic.png" Url="AllItems.aspx">
<Toolbar Type="Standard" />
<XslLink Default="TRUE">main.xsl</XslLink>
<RowLimit Paged="TRUE">30</RowLimit>
<ViewFields>
<FieldRef Name="Attachments">
</FieldRef>
<FieldRef Name="LinkTitle">
</FieldRef>
<FieldRef Name="CourseDesc">
</FieldRef>
</ViewFields>
<Query>
<OrderBy>
<FieldRef Name="ID">
</FieldRef>
</OrderBy>
</Query>
<ParameterBindings>
<ParameterBinding Name="NoAnnouncements" Location="Resource(wss,noXinviewofY_LIST)" />
<ParameterBinding Name="NoAnnouncementsHowTo" Location="Resource(wss,noXinviewofY_DEFAULT)" />
</ParameterBindings>
</View>
</Views>
<Forms>
<Form Type="DisplayForm" Url="DispForm.aspx" SetupPath="pages\form.aspx" WebPartZoneID="Main" />
<Form Type="EditForm" Url="EditForm.aspx" SetupPath="pages\form.aspx" WebPartZoneID="Main" />
<Form Type="NewForm" Url="NewForm.aspx" SetupPath="pages\form.aspx" WebPartZoneID="Main" />
</Forms>
</MetaData>
</List>
I am applying the feature to SPWeb level.
cheers
Sathya

redeployed a new solution; since I was getting this error. I would have done typo errors etc.
https://naveengopisetty.wordpress.com/2011/09/10/error-occurred-in-deployment-step-activate-features-invalid-file-name-the-file-name-you-specified-could-not-be-used-it-may-be-the-name-of-an-existing-file-or-directory-or-you-may-not-have-pe/
Cheers
Sathya

Error while invoking the WSDL service of EBS from BPEL process

Hi Team,
when we are calling webservice client to call WSDL service which is published in Oracle EBS integrated SOA Gateway from BPEL process.
After invoking, we are getting the below error
<bpelFault><faultType>0</faultType><remoteFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>FND_SOA_SERVICE_EXECUTION_ERR:oracle.apps.fnd.soa.util.SOAException: ServiceExecutionError: Error while executing the service Exception returned from JCA Service Runtime. Exception returned from JCA Service Runtime. null :Please see service monitor logs for full error trace</summary></part><part name="detail"><detail>oracle.j2ee.ws.client.jaxws.JRFSOAPFaultException: Client received SOAP Fault from server : FND_SOA_SERVICE_EXECUTION_ERR:oracle.apps.fnd.soa.util.SOAException: ServiceExecutionError: Error while executing the service Exception returned from JCA Service Runtime. Exception returned from JCA Service Runtime. null :Please see service monitor logs for full error trace</detail></part><part name="code"><code>{http://schemas.xmlsoap.org/soap/envelope/}Server</code></part></remoteFault></bpelFault>
API Name : OE_ORDER_PUB.PROCESS_ORDER
could you please let me know the exact problem and provide the solution.
Thanks
Phani Ch.

Hi Phani,
Are you able to reproduce issue as below:
1. Login to Application as sysadmin.
2. Navigate to Intergrated SOA Gateway > Integration Repository.
3. Click on search on right hand side of the page.
4. In the Internal Name type "FND_USER_PKG" and click Go.
5. Click on the User link.
6. Under the "Web Service - SOA Provider", click in the "View WSDL". Copy the complete URL "http://test:8003/webservices/SOAProvider/plsql/fnd_user_pkg/?wsdl"
7. Open the soapUI.
8. Click File > new soapUI Project.
9. Test the web service.
If yes,
I think you might be need to execute a patch:
solution:
To implement the solution, please execute the following steps:
1. Download and review the readme and pre-requisites for iAS Patch 18855074.
Note: Above Merge Label Request (MLR) is build for EBS 12.1.3 having OC4J 10.1.3.5.
2. Enable the profile option "EBS Adapter for BPEL, Function Security Enabled".
a. Login as SYSADMIN user and Navigate to System >Profile and Search for "EBS Adapter for BPEL, Function Security Enabled" (Internal name :EBS_ADAPTER_FUNCTION_SEC_ENABLED)
b. Set the Value to 'Y' at SITE level . This means function security feature is enabled and all API calls for PL/SQL APIs, Oracle e-Commerce Gateway, and concurrent programs will be checked for user security before they are invoked.
3. Retest the issue by Generating and Deploying the required package.
4. Migrate the solution as appropriate to other environments.
Thanks
Ranjan

Error while udating the forecast value in M.master through RMDATIND Program

Similar Messages

Maybe you are looking for