Error while uploading SSRS Reports to SharePoint Report Library
Dear All,
I am having a SSRS Server running in SharePoint integrated mode and I am running reports in SharePoint successfully, but I am facing issue with one site as shown below.
I am getting below error while uploading a report to specific path as shown below;
I can upload to any link but not for the below link shows /departments/ocean
I checked my ReportServer paths from RS Configuration Manager and I cannot find that defined path there. But I can see all other links are registered()
Note: Below shows my web applications in SharePoint farm(four web sites). I have define paths(site collections) only in default web application, not in other webs which has a port number.
I am not sure how the RS Configuration Manager picks thoae Define Manage Path in site collections.
But I think, it should pick department site collections as well.
Could you please guide me how to rectify above error?
ASP.Net, C#.Net, SQL Server ,Win32
Hi,
I recommend to check you can connect to the site collection in Report Builder.
If not, please check if you have permission to access the site collection.
Please also check if the Report Server Integration Feature is activated in the site collection.
To narrow the issue scope, I recommend to create a new site collection using the departments path in SharePoint to see if the issue still occurs.
As a workaround, you can also save the report to local drive and then upload it to SharePoint library using Upload Document button in the ribbon in SharePoint library.
In the meanwhile, you can post your question to the forum for SSRS: http://social.technet.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlreportingservices.
More experts will assist you, then you will get more information relation to SSRS.
Best regards.
Thanks
Victoria Xia
TechNet Community Support
Similar Messages
-
Getting error while uploading multiple files in sharepoint hosted app in 2013 with REST API
Hi All,
In one of my tasks, I was struck with one issue, that is "While uploading multiple files into custom list with REST API".
Iam trying to upload multiple files in library with REST calls for an APP development, my issue is if i wants to upload 4 image at once its storing only
3 image file and further giving "Conflict" error". Below is the attached screenshot of exact error.
Error within screenshot are : status Code : 409
status Text :conflict
For this operation i am uploading different files as an attachment to an list item, below is the code used for uploading multiple files.
my code is
function PerformUpload(listName, fileName, listItem, fileData)
var urlOfAttachment="";
// var itemId = listItem.get_id();
urlOfAttachment = appWebUrl + "/_api/web/lists/GetByTitle('" + listName + "')/items(" + listItem + ")/AttachmentFiles/add(FileName='" + fileName + "')"
// use the request executor (cross domain library) to perform the upload
var reqExecutor = new SP.RequestExecutor(appWebUrl);
reqExecutor.executeAsync({
url: urlOfAttachment,
method: "POST",
headers: {
"Accept": "application/json; odata=verbose",
"X-RequestDigest": digest
contentType: "application/json;odata=verbose",
binaryStringRequestBody: true,
body: fileData,
success: function (x, y, z) {
alert("Success!");
error: function (x, y, z) {
alert(z);Hi,
THis is common issue if your file size exceeds
upload a document of size more than 1mb. worksss well for kb files.
https://social.technet.microsoft.com/Forums/office/en-US/b888ac78-eb4e-4653-b69d-1917c84cc777/getting-error-while-uploading-multiple-files-in-sharepoint-hosted-app-in-2013-with-rest-api?forum=sharepointdevelopment
or try the below method
https://social.technet.microsoft.com/Forums/office/en-US/40b0cb04-1fbb-4639-96f3-a95fe3bdbd78/upload-files-using-rest-api-in-sharepoint-2013?forum=sharepointdevelopment
Please remember to click 'Mark as Answer' on the answer if it helps you -
(409) Conflict Error while uploading the file into Sharepoint library
Getting the below error while uploading the file into Sharepoint library.
(409) Conflict. at System.Net.HttpWebRequest.GetResponse() at Microsoft.SharePoint.Client.SPWebRequestExecutor.Execute() at Microsoft.SharePoint.Client.File.SaveBinary(ClientContext context, String serverRelativeUrl,
Stream stream, String etag, Boolean overwriteIfExists
I have used the below code:
ClientOM.File.SaveBinaryDirect(clientContext, "/Shared%20Documents/NewDocument.pptx", memoryStream, true);
Thanks in advance.May be issue is with path.
https://server/ should be there instead of
subsite path(https://server/path/path)
in the client context
Check the below link
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/fbb38b10-1127-48a6-a65f-0301edd766c4/the-remote-server-returned-an-error-409-conflict-error-while-uploading-files-to-sharepoint?forum=sharepointdevelopmentlegacy -
Getting error while running SSRS report in SharePoint 2010
Hi,
I am getting below error while running a SSRS reports in SharePoint. Your help will be appreciated
Webpage error details
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; .NET4.0C; .NET4.0E)
Timestamp: Wed, 5 Nov 2014 11:58:42 UTC
Message: Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 503
Line: 5
Char: 62123
Code: 0
Thanks,
ManjunathHi,
According to your post, my understanding is that you get error while running SSRS reports.
Basically, If the Request Management service is enabled, it manages all incoming requests by evaluating logic rules against the user requests in order to determine what\which action to take and which machine or machines (targets) in the farm should handle
the request.
By default the Request time out value for Request Management service are as follows,
RequestTimeout : 00:01:40
RequestExecutionTimeout : 01:00:00
So the error throws from RM service for those reports who take more than 1 minute to generate the report.
To solve this issue, we can stop the Request Management service.
Or increase the time out
value by making use of following PowerShell script.
$waUrl = "URLofWEbApp"
$wa = Get-SPWebApplication $waUrl
$rmSettings = $wa | Get-SPRequestManagementSettings
$req=$wa.RequestManagementSettings
$timeout2= New-TimeSpan -minutes 5
Sreq.Requesttimeout=$timeout2
$req.update()
For more information:
http://blogs.technet.com/b/sajiths/archive/2014/08/19/ssrs-reports-timed-out-with-39-503-39-error-sharepoint-2013.aspx
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support -
Error while trying to save a crystal report via the Add-ins
Hi All,
I'm getting an error while trying to save the crystal report after I have opened it from the SAP.
When I'm trying to save the report via the Add-ins I'm getting the next error :
Unknown error accured failed to get the internal key of the current user.
Thanks for your help,
EyalHi Eyal,
Even though you posted your 1st message couple of month ago, I would still say welcome you to post on the forum.
What is your B1 version and PL?
Thanks,
Gordon -
Getting error while uploading a document in a library
Hi,
I'm getting a weird error while uploading the document in the library. And I don't get it all the times but most of the times.
It reads:
The file <library name>/<file name> has been modified by i:0#.<user-id> on <datetime stamp>
How to resolve this ? I have referred many articles on this one, but none helped.
Thanks for your response in advance.
RegardsHi Prajk,
Based on your description, I recommend to check if there are any ItemAdded event receiver or workflows which are triggered when an item is created to update the document properties in the library.
If there is any ItemAdded event receiver on the library, I recommend to wait for ItemAdded to finish before the ListFieldIterator control residing on EditForm.aspx loads (It’s the ListFieldIterator which displays the Item’s fields ).
http://blogs.msdn.com/b/manuj/archive/2009/09/22/itemadded-event-on-document-library-the-file-has-been-modified-by-on-error.aspx
If there is any workflow on the library, I recommend to add a Pause for Duration step at the beginning of the workflows.
If above cannot work, please check ULS log for detailed error message.
For SharePoint 2013, by default, ULS log is at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS.
Best regards.
Thanks
Victoria Xia
TechNet Community Support -
UCCE / IPIVR : Error while uploading file. Please try again later.
IPIVR version 8.5x
Receive "Error while uploading file. Please try again later"
Renamed the script to a different name and still could not upload. I am able to upload other scripts without any issue. I did find the ICM subsystem in partial service. If that was the issue I would think it would cause an issue with all the scripts. The script does validate. Not sure why at this point.Hi Aditya,
Are you using SharePoint 2010 or SharePoint 2013?
Did this issue occur for all users or the special user?
Please go to Central Administration->Manage service applications->User Profile service application->manage user profile, search and edit the user profile, then upload a picture for the user, compare the result.
In addition, please check the log file to check more information about this issue.
The path of the log file is:
SharePoint 2010: C:\Program Files\Common Files\microsoft shared\Web Server Extensions\14\LOGS
SharePoint 2013: C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\LOGS
Best Regards,
Wendy
Wendy Li
TechNet Community Support -
Error while uploading Template
Error while uploading Template in Internet Procurement Catalog Administrator responsibility
I downloaded "Item Price" and i had one item onto spread sheet and tried to upload in above responsibility.
This is how header level is in the template and line level has item information.
#ENCODING Cp1252
Language Section* EN-US
Catalog Section Supplier* Title
FEDERAL INDUSTRIES Test Catalog
***********When i looked into log file i see error message ********************
[5/20/11 7:58:13 PM] <INFO> Session language altered to AMERICAN
[5/20/11 7:58:13 PM] <INFO> Session territory altered to AMERICA
[5/20/11 7:58:13 PM] <INFO> ********** Loader started **********
[5/20/11 9:35:08 AM] <ERROR> USR:MSG:POM_CAT_MISS_LANG_SEC
[5/20/11 9:35:08 AM] <ERROR> -> Missing Language Section.
[5/20/11 9:35:08 AM] <INFO> *********************
[5/20/11 9:35:08 AM] <ERROR> Failure Message is ::
[5/20/11 9:35:08 AM] <ERROR> USR:MSG:POM_CAT_MISS_LANG_SEC
[5/20/11 9:35:08 AM] <INFO> *********************
[5/20/11 9:35:08 AM] <INFO> Job failed
[5/20/11 9:35:08 AM] <INFO> ********** Loader stopped **********
I already had language section in the template as shown above, not sure why it is giving error.
could you please let me know how to troubleshoot
Edited by: 855902 on May 20, 2011 5:02 PMHi,
We believe you are getting this error because of some kind of format issue in the flat file which you are loading..
You can refer below URL:
http://appswork.blogspot.com/2009/09/catalog-loader.html
/S.P DASH -
Error while uploading BITMAP image in SAP through SE78.
Hello all,
I am getting below error while uploading image into SAP through SE78.
'Bitmap file: No color table available (True Color, Bitcount 32)'.
I have tried searching for solution and got some help from below reply from a thread:
You may do these options:
1. Lower the resolution of the image
2. Lower the file size of the image
Regards,
Reymar
I have got a image size of 6.14 KB and resolution of 72*72 dots per inch.
Thanks in Advance.
- Jayant Sahu.Hi Daniel,
First of all, if you dont mind, start a new thread for your question please.
Anyways, answer to your question is --
You need to save your picture with lower-most bits BITMAP Type. When you were saving your picture as .bmp, take care you are passing lower-most BITMAP type and not 24-bit as it may be as default.
This way, your problem would be resolved.
Thanks.
Kumar Saurav. -
Hi Guys,
I am getting a Page can not be displayed error while uploading a COntract Document in SAP-E-soucing 7.0.
Maximum Size set in Our SYSTEM is :9765MB.
Approx size of the Document tried is more then 300MB.
Appreciate your help on this.
Regards
TarunHi Tarun,
Please check the below system properties using system user login
attachments.maxSizeKB.buyers - "Maximum size in KB of a employer-attached attachment file"
attachments.upload.enable.buyers- " Enable/Disable uploading of attachments by internal users"
Also Please check with other attachment, contracts related properties in the System.
Let me know if this helps.
Thanks,
Raj. -
Error while uploading Transport request
Hi friends,
Error while uploading transport request to the transport directory,
we downloaded the trasnport request from one sap system which have a set of developments
for example downloaded files are;
control file: K900470.SAD and Data file: R900470.SAD fronm transport directory.
we are trying to upload the transport to another Sap system
we have
Uploaded the controlling file K900470.sad to the location /usr/sap/transpad/cofiles/
Uploaded the controlling file R900470.sad to the location /usr/sap/transpad/data/
we tried tro add in the import queues using TCODE: STMS
and trying to import.
During import we get
error:
HALT: unknown dynpro format: d021s_length() returned 0 Please contactthe SAP support.
End with rc : 16
Please help me with the problem.
Thanks in advance
DeepakHi,
Check the versions of the two sap systems you are downloading and uploading the transport requests -
DB Connect Load - "Unknow error while uploading data from the DB Table"
Hi Experts,
We have our BI7 system connected to Oracle DB based third party tool. The loads are performing quite well in DEV environment.
I would like to know, how we transport DB Connect datasources to Quality systems? Any different process to be followed for DB Connect datasources?
At present the connections between BI Quality and the third party quality systems are established. We transported the DataSource from BI DEV system to BI quality system, but on trigerring an infopackage we are not able to perform loads. It prompts - "Unknow error while uploading data from the DB Table".
Also on comparing the DataSources in DEV system and Quality system there are no fields in "Proposal" tab of datasource in Quality system. Also I cannot change or activate Datasource in Quality system as we dont have change access in quality.
Please advice.
Thanks,
AbhijitHi,
Sorry for bumping an old thread ....
Did this issue get ever get resolved?
I am facing the same one. The loads work successfully in Dev. The transport for DBConnect DS also moved in successfully.
One strange this is that DB User for dev did not automatically change to db user from quality when I transported the DBConnect datasource. DBCon DS still shows me the DB User from Dev in Quality system
I get "Unknown Error" whenever I trigger the data package.
Advait -
Getting error while opening Excel document from SharePoint site
Hello All,
I am getting following error while opening Excel document from SharePoint site.
This issue appears when we open Excel document from Windows>> Run using below mentioned command:
Excel.exe "{File Name}"
If once I go to Excel back stage and browse for the SharePoint location, then this problem disappears.
I have a work around for this issue but main problem is that i do not have any work around when i need to open Exel document using Excel COM interop in C#.
Thanks,
Amit Bansal
Amit Bansal http://www.oops4you.blogspot.com/Hi Amit Bansal,
Thanks for posting in MSDN forum.
This forum is for developers discussing developing issues involve Excel application.
According to the description, you got an error when you open the document form SharePoint site.
Based on my understanding, this issue maybe relative to the SharePoint, I would like move it to
SharePoint 2013 - General Discussions and Questions forum.
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us.
Thanks for your understanding.
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Error while saving list workflow in sharepoint designer 2013
Hi,
I am trying to create custom workflow using sharepoint workflow 2013 at client side.While i am saving this,it thowas error-"Server side activities have been updated.you need to restart sharepoint designer to use the updated version
of activites"
I have installed 32-bit sharepoint designer 2013 in my system and i have no access to server.
I have also followed the solution and deleted the contents in the below location.
<user profile>\appdata\roaming\microsoft\SharePoint Designer\ProxyAssemblyCache
<user profile>\appdata\local\microsoft\websitecache\<sitename>
Please help to solve the error.
Thank youYou need to install updated version of SharePoint designer.
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/f255f4b4-1828-4ccb-983a-5efbf0e020ae/sharepoint-designer-2013-server-side-activties-have-been-updated-prompt?forum=sharepointcustomization
Try below:
http://stackoverflow.com/questions/19652391/error-while-saving-a-workflow-via-sharepoint-designer-server-side-activities-ha -
Error while uploading text file....
Halo Friends,
I am uploading 4 text files which contain three columns separated by a tab, but when i am trying to upload those files using WS_UPLOAD Function Module i am getting a runtime error saying 'error while uploading/downloading'.
Please solve this problem as soon as possible.
Thanks in Advance,
ramaHalo again,
Now that i am able to upload the files, i need to update the database table the update statement is executing correctly but when i debug i see that the sy-subrc value is 4 but not 0.
and hence the it is not committed.
Any suggestions. i am pasting my code here for your reference:
Tables: qmfe.
data: begin of gt1_qmfe occurs 0,
qmnum like qmfe-qmnum,
fenum like qmfe-fenum,
/itml/usr20 like qmfe-/itml/usr20,
end of gt1_qmfe.
data: begin of gt2_qmfe occurs 0,
qmnum like qmfe-qmnum,
fenum like qmfe-fenum,
/itml/usr21 like qmfe-/itml/usr21,
end of gt2_qmfe.
data: begin of gt3_qmfe occurs 0,
qmnum like qmfe-qmnum,
fenum like qmfe-fenum,
/itml/usr19 like qmfe-/itml/usr19,
end of gt3_qmfe.
data: begin of gt4_qmfe occurs 0,
qmnum like qmfe-qmnum,
fenum like qmfe-fenum,
/itml/usr07 like qmfe-/itml/usr07,
end of gt4_qmfe.
data: gs1_qmfe like line of gt1_qmfe,
gs2_qmfe like line of gt2_qmfe,
gs3_qmfe like line of gt3_qmfe,
gs4_qmfe like line of gt4_qmfe.
data: ls_lines1 type i,
ls_lines2 type i,
ls_lines3 type i,
ls_lines4 type i.
parameters: ip_file1 type RLGRAP-FILENAME default 'C:\Urgent\TextFiles\StoDt.txt' obligatory,
ip_file2 type RLGRAP-FILENAME default 'C:\Urgent\TextFiles\RcDtCust.txt' obligatory,
ip_file3 type RLGRAP-FILENAME default 'C:\Urgent\TextFiles\DockDate.txt' obligatory,
ip_file4 type RLGRAP-FILENAME default 'C:\Urgent\TextFiles\AWB.txt' obligatory.
field-symbols: <fs1> like gs1_qmfe,
<fs2> like gs2_qmfe,
<fs3> like gs3_qmfe,
<fs4> like gs4_qmfe.
perform upload_gt1_qmfe.
perform upload_gt2_qmfe.
perform upload_gt3_qmfe.
perform upload_gt4_qmfe.
perform update_qmfe.
*& Form upload_gt1_qmfe
text
--> p1 text
<-- p2 text
FORM upload_gt1_qmfe .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = ip_file1
FILETYPE = 'DAT'
TABLES
DATA_TAB = gt1_qmfe.
describe table gt1_qmfe lines ls_lines1.
write: / ls_lines1.
ENDFORM. " upload_gt1_qmfe
*& Form upload_gt2_qmfe
text
--> p1 text
<-- p2 text
FORM upload_gt2_qmfe .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = ip_file2
FILETYPE = 'DAT'
TABLES
DATA_TAB = gt2_qmfe.
describe table gt2_qmfe lines ls_lines2.
write: / ls_lines2.
ENDFORM. " upload_gt2_qmfe
*& Form upload_gt3_qmfe
text
--> p1 text
<-- p2 text
FORM upload_gt3_qmfe .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = ip_file3
FILETYPE = 'DAT'
TABLES
DATA_TAB = gt3_qmfe.
describe table gt3_qmfe lines ls_lines3.
write: / ls_lines3.
ENDFORM. " upload_gt3_qmfe
*& Form upload_gt4_qmfe
text
--> p1 text
<-- p2 text
FORM upload_gt4_qmfe .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = ip_file4
FILETYPE = 'DAT'
TABLES
DATA_TAB = gt4_qmfe.
describe table gt4_qmfe lines ls_lines4.
write: / ls_lines4.
ENDFORM. " upload_gt4_qmfe
*& Form update_qmfe
text
--> p1 text
<-- p2 text
FORM update_qmfe .
data ls_cnt type i.
loop at gt1_qmfe assigning <fs1>.
update qmfe set /itml/usr20 = <fs1>-/itml/usr20
where qmnum = <fs1>-qmnum
and fenum = <fs1>-fenum.
if sy-subrc = 0.
commit work.
add 1 to ls_cnt.
endif.
endloop.
write: / ls_cnt.
ENDFORM. " update_qmfe
Maybe you are looking for
-
I am looking for a way to efficiently move from HSRP to GLBP.
I want to move from using HSRP to GLBP and encountering issues with making it a smooth transition. I am testing my plans using GNS3 Our two external production routers are configured to use HSRP and the current traffic demands are taking a toll on t
-
10.9.2 Update KILLED APPLE MAIL
Hi Apple People! Did the update to 10.9.2 AND the security update this morning. Now mail is seriously broken. All of the mail "headers" (the little column to the left of the message viewer area) show up but if you click on them 90% of the time the bi
-
Financial Statement Version vs item
HI Pros what is the diff between Financial Statement Version 0GL_FSVERSN versus Financial Statement item 0GLACCEXT kris
-
I have a 5th Gen. iPod and am using Windows XP. I am having problems syncing my iTunes library with my iPod. A number of songs will transfer and then I get the following message: 'You do not have enough access privileges for this operation' Any sugge
-
Getting new Hard Disk. Need help with moving files from old one.
Hey guys so here is my dilema. So I have a Lacie 500GB Hard Drive and made the mistake of accidently deleting all my backups.db into the trash but thankfully never emptied that. There was no way to put it back into the backups folder so it caused me