Error with butwise xor in update statement
Hi
What is the corresponding of ^(xor) in oracle .The below is the mysql scripte
UPDATE fvmaptsqnug SET FTQQZNUGFVMPRSG = FTQQZNUGFVMPRSG ^ 1 WHERE EIJTQQVWPRSKHF = 1 AND EWJUSGFTTKVF = 1;
So can anyone help me in converting the above script to oracle.
Thanking you in advance
dinny
hi
I changed the script to
UPDATE fvmaptsqnug SET FTQQZNUGFVMPRSG = (FTQQZNUGFVMPRSG - 2 * bitand(FTQQZNUGFVMPRSG, 0)) WHERE EIJTQQVWPRSKHF = 1 AND EWJUSGFTTKVF = 1;
It is working but still iam not still very sure whether it is correct
regards
dinny
Similar Messages
-
HelloI have recently updated the system with the windows automatic updates as well the 8.1OS, since then the system shuts down instantly or never starts even with a heavy force applied to the power button, sometimes it starts automatically and goes off in a while.It works fine, if switched back to the original factory condition. I have tried with online analysis and maintenance part and had reinstalled the drivers, but yet again the problem persists. Thanks in advance. Bijoy
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
Download error with CC programs/apps updates. Solutions?
I am getting a download error when I try to update my CC programs/apps. Solutions?
WHAT error?
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html -
[Solved] errors with keys after pacman update?
Hi,
I installed pacman 4.0.1-4, but now this is what happens when I try and update.
Proceed with installation? [Y/n] Y
(28/28) checking package integrity [######################] 100%
error: binutils-multilib: signature from "Jan Alexander Steffens (heftig) <[email protected]>" is unknown trust
error: libcap-ng: signature from "Ionut Biru <[email protected]>" is unknown trust
error: cifs-utils: signature from "Tobias Powalowski <[email protected]>" is unknown trust
error: cmake: signature from "Dave Reisner <[email protected]>" is unknown trust
error: colord: signature from "Ionut Biru <[email protected]>" is unknown trust
error: lib32-glibc: signature from "Jan Alexander Steffens (heftig) <[email protected]>" is unknown trust
error: lib32-gcc-libs: signature from "Jan Alexander Steffens (heftig) <[email protected]>" is unknown trust
error: gcc-libs-multilib: signature from "Jan Alexander Steffens (heftig) <[email protected]>" is unknown trust
error: gcc-multilib: signature from "Jan Alexander Steffens (heftig) <[email protected]>" is unknown trust
error: perl: key "6D1655C14CE1C13E" is unknown
error: key "6D1655C14CE1C13E" could not be looked up remotely
error: openssl: signature from "Pierre Schmitz <[email protected]>" is unknown trust
error: git: signature from "Dan McGee <[email protected]>" is unknown trust
error: gpgme: signature from "Dave Reisner <[email protected]>" is unknown trust
error: gvfs: signature from "Dave Reisner <[email protected]>" is unknown trust
error: inetutils: key "FCF2CB179205AC90" is unknown
:: Import PGP key 9205AC90, "Eric Belanger <[email protected]>", created 2011-04-19? [Y/n] Y
error: key "Eric Belanger <[email protected]>" could not be imported
error: intltool: key "FCF2CB179205AC90" is unknown
:: Import PGP key 9205AC90, "Eric Belanger <[email protected]>", created 2011-04-19? [Y/n] ^C
Interrupt signal received
When pacman updated it suggested that I run this command,
sudo pacman-key --init
I know that usually I would say yes to a key and pacman should remember it, but what are all the errors?
Last edited by mich04 (2012-01-20 17:19:26)# /etc/pacman.conf
# See the pacman.conf(5) manpage for option and repository directives
# GENERAL OPTIONS
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir = /
#DBPath = /var/lib/pacman/
#CacheDir = /var/cache/pacman/pkg/
#LogFile = /var/log/pacman.log
HoldPkg = pacman glibc
# If upgrades are available for these packages they will be asked for first
SyncFirst = pacman
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#XferCommand = /usr/bin/curl -C - -f %u > %o
#CleanMethod = KeepInstalled
Architecture = auto
# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg =
#IgnoreGroup =
#NoUpgrade =
#NoExtract =
# Misc options (all disabled by default)
#UseSyslog
#ShowSize
#UseDelta
#TotalDownload
#CheckSpace
# REPOSITORIES
# - can be defined here or included from another file
# - pacman will search repositories in the order defined here
# - local/custom mirrors can be added here or in separate files
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
# - URLs will have $repo replaced by the name of the current repo
# - URLs will have $arch replaced by the name of the architecture
# Repository entries are of the format:
# [repo-name]
# Server = ServerName
# Include = IncludePath
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
# The testing repositories are disabled by default. To enable, uncomment the
# repo name header and Include lines. You can add preferred servers immediately
# after the header, and they will be used before the default mirrors.
#[testing]
#Include = /etc/pacman.d/mirrorlist
[core]
Include = /etc/pacman.d/mirrorlist
[extra]
Include = /etc/pacman.d/mirrorlist
#[community-testing]
#Include = /etc/pacman.d/mirrorlist
[community]
Include = /etc/pacman.d/mirrorlist
# If you want to run 32 bit applications on your x86_64 system,
# enable the multilib repositories as required here.
#[multilib-testing]
#Include = /etc/pacman.d/mirrorlist
[multilib]
Include = /etc/pacman.d/mirrorlist
# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#Server = file:///home/custompkgs
Here it is. -
Mail delivery error with 5510 e-print. updates and connection are ok. friend has same problem.
I have checked all of the updates and connections for my new printer. As far as I can tell, I've checked everything that needs to be checked and all is good. But, I still get the Mail Delivery error when e-printing. And my friend has the same problem with her new 5510 b111a. What could possibly be the problem? Regular printing, scanning and so on work fine with my wireless connection.
This question was solved.
View Solution.So it sounds like it may be an Issue with the provided Email Address from your internet service provider, you are sending from ,
What i would suggest as a test is to create a Email account either with g mail and or yahoo, and try to send the email to your eprint account/Email, and see if it accepts the email also, make sure you have your printer set to Accept email from all users you can do this by logging into Eprint Center and then going into these settings and selecting that option
I am an HP employee.
__ if this Solution has helped Please Mark as Resolved and feel free to Provide a Kudos__ -
Anyone else have this issue?
Attachments:
error.JPG 20 KBThis looks like a problem that has been documented by Microsoft here. Did you try to download and install it manually or using Update Service? Cal you tell us the language and operating system that you are using?
If you tried using update service and got this message, you can try downloading and install the update manually instead. The link for the download is here if you are a professional user or from here if you are an educational user.
Yi
Software Developer
National Instruments - Electronics Workbench Group -
Handling error with multiple row insert/update
Hi,
I need to insert multiple rows into a table, and I understand that i need to use executeArrayUpdate().
My problem is this :
1. How do I know in case some of the rows in the array failed during the INSERT?
2. When I do know that, how do I find those particular rows?
ThanksODAFEONIHOWO wrote:
Please i need help on how to enter multiple row into mysql with one insert
statement and jsp it's not possible - you'll need to do a batch insert
i have been trying this for weeks without sucess e.g how much experience do you have with Java? -
Has anyone had any problems ejecting their iPods with the new 1.2.1 update? When I try to eject my iPod it tells me that some other program is using it and that it cannot eject it. It's a pain in the behind. Pleas, APPLE, help me out with this issue. I tried to restore the iPod to the factory settings but that was of no use.
Oh great!!
I just upgrade & am now re loading all my files (boring).
While I wait, how about you try going to your "my computer" icon.
Then right click on the ipod (should show up like a pen drive or similar) and you should have an eject or disconnect option in the drop down menu.
Give that a whirl & see what happens.
Just an idea, as that is what i will try if I can't eject.
Cheers.
Steve -
Where clause with substr for a update statement
Dear Reader,
Currently I am working on a package that will update a value in a column, this column always has a default value of 9999 and is named STATUS_FLAGS
In my package I need to update this column's value for instance into 9919. Where 1 represents a specific extraction run and 9 represents non-ran records.
Currently I have the following code (which does not work):
IF run = 'somevalue' THEN
-- The flag string: 9999 where 9 = xx, 9 = xxx, 9 = xxxx, 9 = etc
UPDATE TABLE.STATUS_FLAGS
SET TABLE.STATUS_FLAGS = 1 || substr(TABLE.STATUS_FLAGS,1,4)
WHERE SUBSTR(TABLE.STATUS_FLAGS,2,3) <> '1';
END IF;
Could you please help me to tell me what I am doing wrong and how I should do it?
Thanks a lot.
Edited by: user3542281 on Jan 6, 2009 5:31 AMI'm really not sure what you're after - you're saying that my method works correctly and that yours doesn't. So, why aren't you using my method?
Perhaps you should give us more information about your situation, such as your starting set of data and the updates you'll be doing.
Or perhaps you want a more generalised version, such as:
update table t
set t.status_flags = substr(t.status_flags, 1, p_position_to_update-1)||'1'||substr(t.status_flags, p_position_to_update+1);where p_position_to_update is a parameter that's passed in (or a variable set in the procedure) -
Hi,
Yesterday I tried to upgrade my iPhone 3G to firmware 2.0.2, after a while it gave an 1604 error.
Now my iPhone only can get in recovery mode. When i try to upgrade, it stucks in "Preparing iPhone for restore", the iPhone only shows the Apple logo. After a while iTunes gives the error: the iPhone could not be restored. An unknowned error occurred (1604).
After a few minutes after the error if I let my iPhone on the loading symbol comes.
Help?My white 16gb phone died after the last upgrade. It had worked from day one and then went to place a call and screen was totally black. Plugged it into my computer and tried to restore, nothing. Played the Apple tech support game for 2 hours. Bottom line if you receive the error code 1604 and after re-installing iTunes and it does not fix the problem, your phone is history. Apple sent out the mail return box via Fed-Ex and my new one is on the way.
-
Strange error with authentication after system update
After a system update i get this strange thing in authentication.
see image:
Can anyone tell me what's this? Is this a virus?
ThanksThat is not a virus. That's a font problem, most likely a corrupt font cache. Try restarting in safe mode, then restart normally. (This will clear some of the font caches, among other things.)
If that doesn't fix it, try some of the other fixes mentioned here:
https://discussions.apple.com/thread/3273445?start=0&tstart=0 -
Error while running batch update statement
Hi
We are experiencing the below error while running the batch update statement where in the IN clause have more than 80,000 entries. The IN clause is already handled for max 1000 values so it has multiple or clause
like update...where id in (1,2...999) OR id in (1000,1001........) OR Id in ()...
Error at Command Line:1 Column:0
Error report:
SQL Error: ORA-00603: ORACLE server session terminated by fatal error
ORA-00600: internal error code, arguments: [kghfrh:ds], [0x2A9C5ABF50], [], [], [], [], [], []
ORA-00600: internal error code, arguments: [kkoitbp-corruption], [], [], [], [], [], [], []
00603. 00000 - "ORACLE server session terminated by fatal error"
*Cause: An ORACLE server session is in an unrecoverable state.
*Action: Login to ORACLE again so a new server session will be created
Is there a limitation of oracle or some bug?
Thankshttp://download.oracle.com/docs/cd/B19306_01/server.102/b14237/limits003.htm
The limit on how long a SQL statement can be depends on many factors, including database configuration, disk space, and memoryI think you're over this limit.
The only way is creating a temporary table with all the values and using
IN (select ...)Max
http://oracleitalia.wordpress.com -
ORA-01403: No data found (Occured in UPDATE Statement)
Dear All,
I am getting No data found error while executing the following UPDATE statement.
UPDATE DEAL
SET CLIENT_CD = 'HDMJARVN'
WHERE CA_REF_NO = 70728
AND CLIENT_CD = 'HDMJARVI';
Wheareas
SELECT *
FROM DEAL
WHERE CA_REF_NO = 70728
AND CLIENT_CD = 'HDMJARVI';
Gives me 1 row.
Please explain.....
Thanks in Advance.UPDATE DEAL
t line 1:
ORA-01403: no data foundHi Yogesh,
I created a trigger on a table "CHILD" which fires during UPDATE statement. As you may notice, the trigger raises "no data found" exception which is not handled as a result the update ends up with an error.
Similar is your case, investigate the trigger to resolve the issue.
SQL> desc child
Name Null? Type
B NUMBER
SQL> create or replace trigger child_trig
2 after update of b on child
3 referencing old as old new as new
4 for each row
5 declare
6 l_dummy number;
7 begin
8 select 1 into l_dummy from dual where dummy = 'TEST';
9 end;
10 /
Trigger created.
SQL> select * from child;
B
1
SQL> update child set b = 5;
update child set b = 5
ERROR at line 1:
ORA-01403: no data found
ORA-06512: at "TEST.CHILD_TRIG", line 4
ORA-04088: error during execution of trigger 'TEST.CHILD_TRIG'
SQL>Regards -
Execution time difference between SELECT & UPDATE statement in JDBC Sender.
Hi Experts,
In my scenario, I have used the JDBC Sender Adapter with the SELECT and UPDATE statement.
Now the problem is in between the execution of Select and update statement, few more entries are coming in the same DB Table.
So result of this is updation take place for those entries which are not even picked up by the select statement.
Can we avoid this execution time difference between the SELECT & UPDATE statemet on JDBC Sender side???
Thanks & Regards
JageshHi
Use serializable option in additional parameters, now all new entries would also be updated. -
'Missing select' error for update statement using WITH clause
Hi,
I am getting the below error for update statement using WITH clause
SQL Error: ORA-00928: missing SELECT keyword
UPDATE A
set A.col1 = 'val1'
where
A.col2 IN (
WITH D AS
SELECT col2 FROM
(SELECT col2, MIN(datecol) col3 FROM DS
WHERE <conditions>
GROUP BY PATIENT) D2
WHERE
<conditions on A.col4 and D2.col3>Hi,
The format of a query using WITH is:
WITH d AS
SELECT ... -- sub_query
SELECT ... -- main query
You don't have a main query. The keyword FROM has to come immediately after the right ')' that ends the last WITH clause sub-query.
That explains the problem based on what you posted. I can't tell if the real problem is in the conditions that you didn't post.
I hope this answers your question.
If not, post a complete test script that people can run to re-create the problem and test their ideas. Include a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all the tables involved, and the results you want from that data.
In the case of a DML operation (such as UPDATE) the sample data should show what the tables are like before the DML, and the results will be the contents of the changed table(s) after the DML.
Explain, using specific examples, how you get those results from that data.
Always say what version of Oracle you're using (e.g. 11.2.0.2.0).
See the forum FAQ: https://forums.oracle.com/message/9362002
Maybe you are looking for
-
Lenovo G560 not booting. CPU Fan 100%. No output on screen or VGA
I have a Lenovo G560 When I power on, the fan is steady for the first 5 seconds, then it spins faster and stays like that. No output from the screen at all. External VGA does not present any output either. HDD doesn't spin and nor does the light tur
-
ITunes will download but wont install on windows 7 64-bit computer.
I got this computer a few weeks ago and first thing i tried to install was iTunes off of the apple site and it wont install. i can download the setup file to my computer and save to my documents but when i right click and click run as administrator,
-
The iPod "iPod" could not be restored. An unknown error occurred (1).This is my Ipod 32 GB, which is out of warranty and is 1G-A1213 and had gone kaput, after having issues with iTunes Software as it was not able to run Music on my IPod when connecte
-
TS3276 I need to report about my stolen Ipad
IPad stolen just yesterday, so how can I track it or lock. (Already has a password) but i understand the password can be wiped out easily,
-
How to create new supply for demand if already supply exists.
We have 2 orders for 1 item. One for Domestic and other for Export. Item already have existing qty in onhand, and we dont want ASCP to see that and want to create new planned order(Supply)...This is for perticular item. Please help ASAP.