Interpreting Multibyte data with File Adapter in BPEL Process

Hi all,
I am trying to interpret multibyte data file using native schema file.The file is defined as below:-
<?xml version="1.0" encoding="UTF-8" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
targetNamespace="http://TargetNamespace.com/ftpinbound"
xmlns:tns="http://TargetNamespace.com/ftpinbound"
elementFormDefault="qualified"
attributeFormDefault="unqualified" nxsd:encoding="MS932" nxsd:stream="bytes" nxsd:version="NXSD">
<xsd:element name="root">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="Header" minOccurs="1" maxOccurs="1">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="RecType" type="xsd:string" nxsd:style="fixedLength" nxsd:length="5"/>
<xsd:element name="OperMode" type="xsd:string" nxsd:style="fixedLength" nxsd:length="1"/>
<xsd:element name="SendSideCompCode" type="xsd:string" nxsd:style="fixedLength" nxsd:length="12"/>
<xsd:element name="RecvSideCompCode" type="xsd:string" nxsd:style="fixedLength" nxsd:length="12"/>
<xsd:element name="BPID" type="xsd:string" nxsd:style="fixedLength" nxsd:length="8"/>
<xsd:element name="InfoTypeCode" type="xsd:string" nxsd:style="fixedLength" nxsd:length="4"/>
     <xsd:element name="CreateDate" type="xsd:string" nxsd:style="fixedLength" nxsd:length="12"/>
<xsd:element name="SendSideSysCode" type="xsd:string" nxsd:style="fixedLength" nxsd:length="12"/>
<xsd:element name="RecvSideSysCode" type="xsd:string" nxsd:style="fixedLength" nxsd:length="12"/>
<xsd:element name="Preliminary" type="xsd:string" nxsd:style="fixedLength" nxsd:length="458"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="Lines" minOccurs="1" maxOccurs="unbounded" nxsd:style="array" nxsd:arrayTerminatedBy="(">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="DataProcessNo" type="xsd:string" nxsd:style="fixedLength" nxsd:length="5"/>
<xsd:element name="InfoClassCode" type="xsd:string" nxsd:style="fixedLength" nxsd:length="4"/>
<xsd:element name="DataCreateDate" type="xsd:string" nxsd:style="fixedLength" nxsd:length="6"/>
<xsd:element name="SellerCode" type="xsd:string" nxsd:style="fixedLength" nxsd:length="12"/>
<xsd:element name="OrderRecvPartyCode" type="xsd:string" nxsd:style="fixedLength" nxsd:length="12"/>
<xsd:element name="PODeptCode" type="xsd:string" nxsd:style="fixedLength" nxsd:length="8"/>
<xsd:element name="ProductNo" type="xsd:string" nxsd:style="fixedLength" nxsd:length="19"/>
<xsd:element name="CorrectionCode" type="xsd:string" nxsd:style="fixedLength" nxsd:length="1"/>
<xsd:element name="SupplyClass" type="xsd:string" nxsd:style="fixedLength" nxsd:length="1"/>
<xsd:element name="Buyer" type="xsd:string" nxsd:style="fixedLength" nxsd:length="7"/>
<xsd:element name="MatStdDimension" type="xsd:string" nxsd:style="fixedLength" nxsd:length="20"/>
<xsd:element name="Package" type="xsd:string" nxsd:style="fixedLength" nxsd:length="7"/>
<xsd:element name="Remarks" type="xsd:string" nxsd:style="fixedLength" nxsd:length="30"/>
<xsd:element name="ConTaxClass" type="xsd:string" nxsd:style="fixedLength" nxsd:length="1"/>
<xsd:element name="SuppDeptCode" type="xsd:string" nxsd:style="fixedLength" nxsd:length="8"/>
<xsd:element name="SuppProdName" type="xsd:string" nxsd:style="fixedLength" nxsd:length="30"/>
<xsd:element name="SuppProdNameCode" type="xsd:string" nxsd:style="fixedLength" nxsd:length="25"/>
<xsd:element name="SuppUnit" type="xsd:string" nxsd:style="fixedLength" nxsd:length="3"/>
<xsd:element name="SuppUnitPrice" type="xsd:string" nxsd:style="fixedLength" nxsd:length="13"/>
<xsd:element name="PODeptName" type="xsd:string" nxsd:style="fixedLength" nxsd:length="20"/>
<xsd:element name="Buyer_K" type="xsd:string" nxsd:style="fixedLength" nxsd:length="14"/>
<xsd:element name="MatStdDim_K" type="xsd:string" nxsd:style="fixedLength" nxsd:length="40"/>
<xsd:element name="Remarks_K" type="xsd:string" nxsd:style="fixedLength" nxsd:length="60"/>
<xsd:element name="SuppDeptName_K" type="xsd:string" nxsd:style="fixedLength" nxsd:length="40"/>
<xsd:element name="SuppProdName_K" type="xsd:string" nxsd:style="fixedLength" nxsd:length="60"/>
<xsd:element name="PODeptName_K" type="xsd:string" nxsd:style="fixedLength" nxsd:length="40"/>
<xsd:element name="CountingMTHs" type="xsd:string" nxsd:style="fixedLength" nxsd:length="4"/>
<xsd:element name="SuppProdNvAmount" type="xsd:string" nxsd:style="fixedLength" nxsd:length="10"/>
<xsd:element name="SupProdSingleItem" type="xsd:string" nxsd:style="fixedLength" nxsd:length="12"/>
<xsd:element name="SupProdWIP" type="xsd:string" nxsd:style="fixedLength" nxsd:length="12"/>
<xsd:element name="SupProdSpoiledQnty" type="xsd:string" nxsd:style="fixedLength" nxsd:length="12"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="Trailer" minOccurs="1" maxOccurs="1">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="RecType" type="xsd:string" nxsd:style="fixedLength" nxsd:length="4"/>
<xsd:element name="NoOfRec" type="xsd:string" nxsd:style="fixedLength" nxsd:length="5"/>
<xsd:element name="Preliminary" type="xsd:string" nxsd:style="fixedLength" nxsd:length="526"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
This schema works fine and data is produced as expected when I am using "chars" as the stream option.However I can't use "chars" as the stream option and need "bytes" as the stream option. However when mentinong "bytes" option the following exception is generated:
Charset "MS932" not supported.
Check the error stack and fix the cause of the error. Contact oracle support if error is not fixable.
     at oracle.tip.pc.services.translation.xlators.nxsd.ByteReader.<init>(ByteReader.java:87)
     at oracle.tip.pc.services.translation.xlators.nxsd.NXSDTranslatorImpl.createScanner(NXSDTranslatorImpl.java:800)
     at oracle.tip.pc.services.translation.xlators.nxsd.NXSDTranslatorImpl.translateFromNative(NXSDTranslatorImpl.java:440)
     at oracle.tip.adapter.file.inbound.ProcessWork.doTranslation(ProcessWork.java:504)
     at oracle.tip.adapter.file.inbound.ProcessWork.processMessages(ProcessWork.java:266)
     at oracle.tip.adapter.file.inbound.ProcessWork.run(ProcessWork.java:179)
     at oracle.tip.adapter.fw.jca.work.WorkerJob.go(WorkerJob.java:51)
     at oracle.tip.adapter.fw.common.ThreadPool.run(ThreadPool.java:272)
     at java.lang.Thread.run(Thread.java:595)
Please let me know can I at all read a file in byte format with File adapter using a desired encoding style?This is littile urgent.
Thanks

Hi James,
Yeah I tried that too and it gave the same error. And I need to encode with MS932 only since the data will contain Japanese characters and this encoding is identified both by windows and non-windows OS.
Please can you advice what can I do since the requirement is urgent.
Thanks

Similar Messages

File Adapter vs BPEL interaction issue on high availability environment

Hi all,
i would really appreciate your help on a matter i'm facing about a composite (SCA) deployed on a clustered environment configured for high availability. To help you better understand the issue i briefly describe what my composite does. Composite's instances are started by means of an Inbound File Adapter which periodically polls a directory in order to check if any file with a well defined naming convention is available. The adapter is not meant to read the file content but only its properties. Furthermore, the adapter automatically makes a backup copy of the file and doesn't delete the file. Properties read by the adapter are provided to a BPEL process which obtains them using the various "jca.file.xyz" properties (configurable in any BPEL receive activity) and stores them in some of its process variables. How the BPEL process uses these properties is irrilevant to the issue i'd like to pose to your attention.
The just described interaction between the File Adapter and the BPEL process has always worked in other non-HA environments. The problem i'm facing is that this interaction stops to work when i deploy the composite in a clustered environment configured for high availability: the File Adapter succeeds to read the file but no BPEL process instance gets started and the composite instance gets stuck (that is, it keeps always running until you don't manually abort it!).
Interesting to say, if I put a Mediator between the File Adapter and the BPEL, the Mediator instance gets started, that is the file's properties read by the adapter are passed to the mediator, but then the composite gets stuck again 'cos even the mediator doesn't seem to be able to initiate the BPEL process instance.
I think the problem lies in the way i configured either the SOA infrastructure for HA or the File Adapter or BPEL process in my composite. To configure the adapter, i followed the instructions given here:
http://docs.oracle.com/cd/E14571_01/integration.1111/e10231/adptr_file.htm#BABCBIAH
but maybe i missed something. Instead, i didn't find anything about BPEL configuration for HA with SOA Suite 11g (all the material i found refers to SOA Suite 10g).
I've also read in some posts that for using the db as a coordinator between the file adapters deployed on the different nodes of the cluster, the db must be a RAC! Is that true or is possible to use even another type of oracle db?
Please, let me know if someone of you has already encountered (and solved :)) a problem like this!
Thanks in advance,
Bye!

Hi,
thanks for your prompt reply. Anyway, i had already read through out that documentation and tried all settings suggested in it without any luck! I'm thinking the problem could be related to the Oracle DB used in the clustered environment, which is not RAC while all documentation i read about high availability configuration always refers to a RAC db. Anyone knows if a RAC Oracle DB is strictly needed for file adapter configuration in HA cluster?
Thanks, bye!
Fabio

How to process large input CSV file with File adapter

Hi,
could someone recommend me the right BPEL way to process the large input CSV file (4MB or more with at least 5000 rows) with File Adapter?
My idea is to receive data from file (poll the UX directory for new input file), transform it and then export to one output CSV file (input for other system).
I developed my process that consists of:
- File adapter partnerlink for read data
- Receive activity with checked box to create instance
- Transform activity
- Invoke activity for writing to output CSV.
I tried this with small input file and everything was OK, but now when I try to use the complete input file, the process doesn't start and automatically goes to OFF state in BPEL console.
Could I use the MaxTransactionSize parameter as in DB adapter, should I batch the input file or other way could help me?
Any hint from you? I've to solve this problem till this thursday.
Thanks,
Milan K.

This is a known issue. Martin Kleinman has posted several issues on the forum here, with a similar scenario using ESB. This can only be solved by completely tuning the BPEL application itself, and throwing in big hardware.
Also switching to the latest 10.1.3.3 version of the SOA Suite (assuming you didn't already) will show some improvements.
HTH,
Bas

" Can not interpret the data in file " error while uploading the data in DB

Dear All ,
After running the below report I am getting the " Can not interpret the data in file " error.
Need to upload the data in DB through excel or .txt file.
Kindly advise to resolve the issue.
REPORT ZTEST_4.
data : it like ZPRINT_LOC occurs 0 with header line,
FILETABLE type table of FILE_TABLE,
wa_filetable like line of filetable,
wa_filename type string,
rc type i.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
CHANGING
FILE_TABLE = filetable
RC = rc.
IF SY-SUBRC = 0.
read table filetable into wa_filetable index 1.
move wa_filetable-FILENAME to wa_filename.
Else.
Write: / 'HI'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
start-of-selection.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = wa_filename
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
TABLES
DATA_TAB = it.
IF SY-SUBRC = 0.
Write: / 'HI'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
insert ZPRINT_LOC from table it.
if sy-subrc = 0.
commit work.
else.
rollback work.
endif.
Regards
Machindra Patade
Edited by: Machindra Patade on Apr 9, 2010 1:34 PM

Dear dedeepya reddy,
Not able to upload the excel but have sucess to upload the .csv file to db through the below code. Thanks for your advise.
REPORT ZTEST_3.
         internal table declaration
DATA: itab TYPE STANDARD TABLE OF ZPRINT_LOC,
      wa LIKE LINE OF itab,
      wa1 like line of itab.
                   variable declaration
DATA: v_excel_string(2000) TYPE c,
       v_file LIKE v_excel_string VALUE    'C:\Documents and Settings\devadm\Desktop\test.csv', " name of the file
        delimiter TYPE c VALUE ' '.         " delimiter with default value space
     read the file from the application server
OPEN DATASET v_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
write:/ 'error opening file'.
ELSE.
    WHILE ( sy-subrc EQ 0 ).
      READ DATASET v_file INTO wa.
      IF NOT wa IS INITIAL.
        append wa TO itab.
      ENDIF.
      CLEAR wa.
    ENDWHILE.
ENDIF.
CLOSE DATASET v_file.
EXEC SQL.
     TRUNCATE TABLE "ZPRINT_LOC"
ENDEXEC.
*------display the data from the internal table
LOOP AT itab into wa1.
WRITE:/ wa1-mandt,wa1-zloc_code,wa1-zloc_desc,wa1-zloc,wa1-zstate.
ENDLOOP.
insert ZPRINT_LOC from table itab.

Problem with FIle Adapter

Hi
We r facing typical problem with file adapter.
Lets say there are 30 files to be processed by placing an copy in arichive folder by file adapter based on pooling
parameters.
All the 30 files are picked up and we can see the copies in archive folder.
But when we go to RWB and check the audit log,
there we could see only 25 files , the 5 files are missing.
no trace found therre about the 5 files.
This is happening only some times and not to all the files placed in the FTP. Later when the same file is placed back from the Archive folder to the Source folder, the file is being picked and processed succesfully.
unfortunately this is happening on Production server
Any pointers which could trouble shoot this issue.
Regards
shekar chandra

Hi,
Couple of thing which you can try....
1. Use EOIO QoS and check if you still face the issue.
Is some program or application writing files to the directory? If yes I would recommend the use of a temporary name to write the files and then rename them.
Sometimes when an external application connects via FTP and transfers the files...
The file could be picked up by the adapter poll even before the transfer of data is done.
Which is why you will find that the file is archived but there is no xml message created for the same in the Integration engine.
Try increasing the poll interval. This helps sometimes.
Regards,
Sidharth

How to choose data in file adapter?

How to choose data in file adapter?

create a xml file in source folder in local source location and pick it up using file adapter in BPEL and deliver it to Target location.

How to get the read input file name in bpel process using File Adapter.

Hi,
I am reading a .txt file from configured directory using File Adapter.
I had configured file adapter to read file with naming pattern “SalesOrder.*\.txt”.
Now I had requirement to access the actual file name in bpel process eg: “SalesOrder123.txt”
How can I get the file name in bpel process.
Any help is appreciated.
Vidya.

1) create a variable of message type. Click on Browse Message type. Here you select Message Type-->Project WSDL Files -->fileAdapterInboundHeader-->Message Types-->Inboundheader_msg. Then click OK
2)Next dbl Click on teh receive Activity which is receing your File from teh File Adapter. Go to the Adapter Tab. Click on Browse variable and select the variable that you had just created above.
This would get the File name in the variable declared

Problems with File adapter

Hi All
I am facing some problems with XI system. XI production server was restarted couple of days back. From that time, 1 file is not reaching its destination. When i go to communication channel monitoring, i see this message for all the communication channels with file adapter "No adapter registered for this channel".
But, communication channels with SOAP adapter are working fine, and the corresponding files are reaching its destinations. So, what should i do to rectify this probelm? Do we have to restart XI server onceagain? Is there anything pirticular, to be careful about, while restarting XI system?
Many Thanks in Advance
Chandra Sekhar

Hi Chandra shekar,
Plz try to do the following steps:
1)Try after restarting the Java Stack.
2)Try after SLD cache.
To clear the SLD cache, from the Integration Builder main menu, choose Environment ® Delete Cache for SLD Data.
Once we have deleted the cache for SLD data, accessing objects in the SLD may take longer than usual initially.
This will help you to find SP Level
http://help.sap.com/saphelp_nw2004s/helpdata/en/1f/c45b4211aac353e10000000a1550b0/frameset.htm
http://hostname:5/CPACache/refresh?mode=full
Regards,
Vinod.

How to use File Adapter in BPEL

Hi,
How to use File Adapter in BPEL. I am using Oracle SOA 10g. Any sample or best example in blog or elsewhere ?

Hi,
Please check the below links for samples on how to use file adapter in BPEL (in 10g/11g usage is same) and let me know any further queries.
11g - http://blogs.oracle.com/theshortenspot/entry/soa_suite_integration_part_3_l
10g - http://erpschools.com/articles/bpel-file-adapter-tutorial

Problem with File adapter channel

Hi All,
I am using a File Adapter channel to process files from FTP server(which is in UNIX environment). I am polling the files from a unix folder (which has this format as -rw-rr). Now I want to know what are the basic permisions should the file have in order to process the file by anyone.
Hope you got the information..
Regards,
Achari

You would need to understand the permission schema.
-rw-rr
- : tells this is file
rw- : tells the owner permission,
r-- : tells the user group permission
r-- tells any other user permission.
so if you are using mode delete/archive mode then the file shoud have execute permission for that owner.
If you are using the same user(i.e. owner that write the file in FTP) to connect FTP from PI then the permission required is
-rwxrr
If you connecting to FTP from PI with a User that is of the same group of the owner then the file permission should be
-rrwxr
If you are using any other to connect to FTP then the file permission should be
-rrrwx
note : rwx or --x is same read/write is included in execute mode along with delete & modify mode.
~SaNv...
Edited by: Santhosh Kumar V on Mar 18, 2010 4:00 PM

Error while using DB Adapter in BPEL process

Hi All,
I am getting error while using DB Adapter in BPEL process
java.lang.Exception: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'DevDBAdapter' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. DBAdapterDemo:DevDBAdapter [ DevDBAdapter_ptt::DevDBAdapter(InputParameters,OutputParameters) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/Dev'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/Dev. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestModel.java:575) at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:381) at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:298) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.sun.el.parser.AstValue.invoke(AstValue.java:157) at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283) at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53) at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1259) at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:90) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:309) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:94) at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:97) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:90) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:309) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:94) at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:91) at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:475) at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:756) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:698) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:285) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:177) at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420) at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157) at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.emSDK.license.LicenseFilter.doFilter(LicenseFilter.java:101) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilter.java:41) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.AuditServletFilter.doFilter(AuditServletFilter.java:179) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:203) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.core.app.perf.PerfFilter.doFilter(PerfFilter.java:141) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:542) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121) at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268) at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174) at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201) at weblogic.work.ExecuteThread.run(ExecuteThread.java:173) Caused by: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'DevDBAdapter' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. DBAdapterDemo:DevDBAdapter [ DevDBAdapter_ptt::DevDBAdapter(InputParameters,OutputParameters) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/Dev'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/Dev. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.sysman.emSDK.webservices.wsdlapi.dispatch.DispatchUtil.invoke(DispatchUtil.java:260) at oracle.sysman.emSDK.webservices.wsdlparser.OperationInfoImpl.invokeWithDispatch(OperationInfoImpl.java:985) at oracle.sysman.emas.model.wsmgt.PortName.invokeOperation(PortName.java:729) at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestModel.java:569) ... 69 more Caused by: javax.xml.ws.soap.SOAPFaultException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'DevDBAdapter' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. DBAdapterDemo:DevDBAdapter [ DevDBAdapter_ptt::DevDBAdapter(InputParameters,OutputParameters) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/Dev'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/Dev. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.j2ee.ws.client.jaxws.DispatchImpl.throwJAXWSSoapFaultException(DispatchImpl.java:955) at oracle.j2ee.ws.client.jaxws.DispatchImpl.invoke(DispatchImpl.java:750) at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.synchronousInvocationWithRetry(OracleDispatchImpl.java:234) at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.invoke(OracleDispatchImpl.java:105) at oracle.sysman.emSDK.webservices.wsdlapi.dispatch.DispatchUtil.invoke(DispatchUtil.java:256) ... 72 more
I have created jndi from console which I have mentioned in DBAdapter and I have provided details of JNDI to DbAdapter in deployment.
I am not able to solve this.
Can you please let me know solution for this or provide me link for tutorial of DBAdapter for stored procdure call?

did u deploy your dbadapter through console to the plan mentioned for deployment?

Two Files merging using File adapter in Bpel 2.0

Hi All,
I have two different files (File 1 and 2) of same format(Two columns each) , now i want to merge these two files using their data and form a consolidated file (File 3 with four columns).
Please advise on how to make it possible using file adapter.
Example:
File 1 Format: A1 and A2 - are two columns of number and sring type
File 2 Format : B1 and B2 - are two columns of number and string type
Consolidated File 3 Format : A1 B1 A2 B2 - forming a single row if A1=B1 and also populating A2 and B2.
Thanks
Karthick.

Hi Karthick,
I would say read both files completely. Then create a transform and select both messages as an input creating one output. With XSLT it should not be too hard to combine the two inputs. You could loop on one file and then select each row from the other file. That output can be written to file.
I don't know what triggers the process, but you could either let bpel be triggered by the polling on one file and read the other synchronously. Or read both files synchronously.
Regards,
Martien

File Read and Write using File Adapter in Bpel

In Bpel Process i am using File Adapter ( Schema is Opaque) for read and write the file contents. i am able do successful deployment and read, write function in first time deployment, after that again i tired to run the application, its not going to write the content of file, its only writing the file with out data's or content in that file.
Please help me...
Saravanan

Hi Eric
In my domain.log file having the following details. In this file im unable to find out what the exact problem. Please look at this and help me.
<2008-01-22 18:25:42,024> <INFO> <default.collaxa.cube.compiler> validating "C:\product\10.1.3.1\OracleAS_1\bpel\domains\default\tmp\.bpel_BPELProcess2_1.1_298e83988d77b6640c33dfeec11ed31b.tmp\BPELProcess2.bpel" ...
<2008-01-22 18:25:49,850> <INFO> <default.collaxa.cube.engine.deployment> <CubeProcessFactory::generateProcessClass>
Process "BPELProcess2" (revision "1.1") successfully compiled.
<2008-01-22 18:25:49,914> <INFO> <default.collaxa.cube.activation> <AdapterFramework::Inbound> Loading JCAActivationAgent for {portType=Read_ptt}
<2008-01-22 18:25:49,914> <INFO> <default.collaxa.cube.activation> <AdapterFramework::Inbound> JCAActivationAgent::load - Locating Adapter Framework instance: OraBPEL
<2008-01-22 18:25:49,930> <INFO> <default.collaxa.cube.activation> <AdapterFramework::Inbound> JCAActivationAgent::load - Done loading JCAActivationAgent for processId='bpel://localhost/default/BPELProcess2~1.1/
<2008-01-22 18:25:49,930> <INFO> <default.collaxa.cube.engine.deployment> Process "BPELProcess2" (revision "1.1") successfully loaded.
<2008-01-22 18:26:02,698> <INFO> <default.collaxa.cube.activation> <AdapterFramework::Inbound> JCAActivationAgent::uninit Shutting down the JCA activation agent, processId='bpel://localhost/default/BPELProcess2~1.0/', activation properties={portType=Read_ptt}
<2008-01-22 18:26:02,698> <INFO> <default.collaxa.cube.activation> <AdapterFramework::Inbound> Adapter Framework instance: OraBPEL - performing endpointDeactivation for portType=Read_ptt, operation=Read
<2008-01-22 18:26:02,698> <INFO> <default.collaxa.cube.ws> <File Adapter::Outbound> Endpoint De-activation called in adapter for endpoint : D:\MAXIMUS_Project_Softwares\jdevstudiobase10132\jdev\mywork\MyLabs\BPELProcess2\in
<2008-01-22 18:26:02,698> <INFO> <default.collaxa.cube.activation> <AdapterFramework::Inbound> JCAActivationAgent::init - Initializing the JCA activation agent, processId='bpel://localhost/default/BPELProcess2~1.1/
<2008-01-22 18:26:02,698> <INFO> <default.collaxa.cube.activation> <AdapterFramework::Inbound> JCAActivationAgent::initiateInboundJcaEndpoint - Creating and initializing inbound JCA endpoint for:
process='bpel://localhost/default/BPELProcess2~1.1/'
domain='default'
WSDL location='rd.wsdl'
portType='Read_ptt'
operation='Read'
activation properties={portType=Read_ptt}
<2008-01-22 18:26:02,698> <INFO> <default.collaxa.cube.activation> <AdapterFramework::Inbound> Adapter Framework instance: OraBPEL - endpointActivation for portType=Read_ptt, operation=Read
<2008-01-22 18:26:02,730> <INFO> <default.collaxa.cube.activation> <File Adapter::Inbound> Endpoint Activation called in File Adapter for endpoint: D:\MAXIMUS_Project_Softwares\jdevstudiobase10132\jdev\mywork\MyLabs\BPELProcess2\in
<2008-01-22 18:26:02,730> <INFO> <default.collaxa.cube.activation> <AdapterFramework::Inbound> Adapter Framework instance: OraBPEL - successfully completed endpointActivation for portType=Read_ptt, operation=Read
<2008-01-22 18:26:02,890> <WARN> <default.collaxa.cube.activation> <File Adapter::Inbound> PollWork::run exiting, Worker thread will die
<2008-01-22 18:26:04,171> <INFO> <default.collaxa.cube.ws> <File Adapter::Outbound> Managed Connection Created
<2008-01-22 18:26:04,171> <INFO> <default.collaxa.cube.ws> <File Adapter::Outbound> Connection Created
<2008-01-22 18:26:04,171> <INFO> <default.collaxa.cube.ws> <File Adapter::Outbound> FileInteraction Created

Custom naming convention with File Adapter

Within my BPEL process, I am using File Adapter and writing out a file. The current naming convention only all some static string with either a sequence (%SEQ%) or some sort of system timestamp. I wonder if it is possible to use some runtime data (data value within the Process Variables) as part of the file name being written out.

Hi, the file/FTP adapters support file metadata such as filename and directory to the BPEL process and exclude the payload. set the UseHeaders parameter to true in the file adapter WSDL.
*<jca:operation*
PhysicalDirectory=""
ActivationSpec="oracle.tip.adapter.file.inbound.FileActivationSpec"
PhysicalArchiveDirectory=""
DeleteFile="true"
IncludeFiles=""
PollingFrequency=""
MinimumAge="0"
OpaqueSchema="false" >
UseHeaders="true"
*</jca:operation>*
thanks.

Get additional file attachements with file adapter

Hello,
Has anyone ever had the following situation:
A Sender interface sends a little bit of data to XI.
This data contains the filenames of some files on a FTP server.
Based on these filename the file needs to be retreived from a FTP server and further handled as an attachement of the XI message?
Is it possible to trigger a sender file adapter with a variable directory and filename from XI, in a BPM or Mapping?
Warm Regards,
Leon Boeijen

hi,
>>>>Is it possible to trigger a sender file adapter with a variable directory and filename from XI, in a BPM or Mapping?
no it's not possible to start a file adapter from BPM
you can use a java proxy that will do the trick
we've used a solution like this many times with no big issues
remember that it's better to use an async java proxy
(with correlation) then a sync one...
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Interpreting Multibyte data with File Adapter in BPEL Process

Similar Messages

Maybe you are looking for