Error with invalid chars found in characteristics

Hi,
I am loading information for this field EKPO-TXZ01 (PO text) into ODS and then into infocube. I have no issue loading this field content into ODS. However from ODS to infocube, I encountered error that says invalid chars found. (This field was defined as chars 40 in the infoobject). At BW customizing, the chars like #, " [] are being maintained. Please advise how to overcome this.

Hi,
From my experience I can say that:
1. Not always assigning permitted characters helps. Especially if chars that you want to pass to the ODS are special chars. And there is too little space in the string with allowable chars.
2. Setting a characteristics as a lower case char helps for its master data. An ODS will not allow to accept data with lower case letters anyway.
3. There are several topics related to your question in this forum with solutions, even with ABAP codes.
Look, for example at this one:
https://www.sdn.sap.com/sdn/collaboration.sdn?contenttype=url&content=https%3A//forums.sdn.sap.com/profile.jspa%3FuserID%3D136828
Best regards,
Eugene

Similar Messages

ECC to HANA DB Migration, DMO error with invalid tables

Hello Migration Experts,
I am facing one issue during the uptime migration phase in DMO. Some of the Export and Import jobs are failing, and i see they are failing due to invalid tables. I have checked in HANA,those table are not imported in to HANA schema.
Should i be adding those tables as described in the BW first guidance document ?
Since the tables doesn't exist in HANA schema , what flag i should be using while adding the tables ?
Content from the first guidance doc
If you encounter critical or invalid tables you can do the following workaround:
Edit the file \\server\sapmnt\CIH\SUM\abap\bin\EUCLONEDEFS_ADD.LST (create if not available)
and add the affected tables here, depending the option you want to take, e.g.
/BIC/AZSPOB10300 noclone (Table seems not to exist)
TBTCS igncount (Table count will be ignored)
TST01 igncount
DBABARL nocontent (Table doesn’t exist on HANA)
REPOSRC ignlargercount (Table might change during cloning)
I have also found OSS Notes 1747673 - R3load on SAP HANA: SQL error: SQL syntax error: near ";" which advises to repalce DDLHDB.TPL, but my kernel is higher than the note says, Can i still try ?
Please advise
Thanks in advance,
GR
Below are some of my error logs
Import Job One
R3load: START OF LOG: 20140906205313
R3load: sccsid @(#) $Id: //bas/741_REL/src/R3ld/R3load/R3ldmain.c#11 $ SAP
R3load: version R7.41/V1.9 [UNICODE]
Compiled Aug 16 2014 00:13:51
R3load -pipe -decluster -i /usr/sap/ECS/SUM/abap/migrate_ut/MIGRATE_UT_00032_IMP.CMD -datacodepage 4103 -dbcodepage 4103 -l /usr/sap/ECS/SUM/abap/migrate_ut/MIGRATE_UT_
00032_IMP.LOG -loadprocedure fast -table_suffix ~ -k 1gegdUM50D801eqteAAv1A94
-------------------- Start of patch information ------------------------
patchinfo (patches.h): (0.048) R3load stops in the dependency loop while creating tasks (note 2044380)
DBSL patchinfo (patches.h): (0.031) New DBCON syntax for HANA (note 1983389)
--------------------- End of patch information -------------------------
process id 17232
(DB) INFO: connected to DB
(DB) INFO: NewDB Kernel version 1.00.80.00.391861
 SQLDBC 1.00.82.00.0394270
(GSI) INFO: dbname = "DEV/00 "
(GSI) INFO: vname = "HDB "
(GSI) INFO: hostname = "saphana "
(GSI) INFO: sysname = "Linux"
(GSI) INFO: nodename = "SAPECCBOX"
(GSI) INFO: release = "3.0.13-0.27-default"
(GSI) INFO: version = "#1 SMP Wed Feb 15 13:33:49 UTC 2012 (d73692b)"
(GSI) INFO: machine = "x86_64"
(RTF) ########## WARNING ###########
 Without ORDER BY PRIMARY KEY the exported data may be unusable for some databases
(RDI) INFO: /usr/sap/ECS/SUM/abap/migrate_ut/MIGRATE_UT_00032_IMP.STR has format version 2
(RDI) INFO: /usr/sap/ECS/SUM/abap/migrate_ut/SAPDOKCLU.STR.logical has format version 2
(DCL) INFO: found logical cluster description for DOKCLU in /usr/sap/ECS/SUM/abap/migrate_ut/SAPDOKCLU.STR.logical
(DB) INFO: loading data in table "DOKCLU" with mass loader for LOBs #20140906205313
(DB) INFO: DOKCLU deleted/truncated
ERROR exec_ddl_stmt: (DB) ERROR: DDL statement failed
(DELETE FROM "DOKTL"WHERE ('HY' < "ID" OR ("ID" = 'HY' AND 'SIMGISPAM_BELEGARTEN' < "OBJECT") OR ("ID" = 'HY' AND "OBJECT" = 'SIMGISPAM_BELEGARTEN' AND 'D' < "LANG
U") OR ("ID" = 'HY' AND "OBJECT" = 'SIMGISPAM_BELEGARTEN' AND "LANGU" = 'D' AND 'E' < "TYP") OR ("ID" = 'HY' AND "OBJECT" = 'SIMGISPAM_BELEGARTEN' AND "LANGU" = 'D' A
ND "TYP" = 'E' AND '0013' < "DOKVERSION")) AND ("ID" < 'TX' OR ("ID" = 'TX' AND "OBJECT" < 'SMP2ALR0000134') OR ("ID" = 'TX' AND "OBJECT" = 'SMP2ALR0000134' AND "LAN
GU" < 'E') OR ("ID" = 'TX' AND "OBJECT" = 'SMP2ALR0000134' AND "LANGU" = 'E' AND "TYP" < 'E') OR ("ID" = 'TX' AND "OBJECT" = 'SMP2ALR0000134' AND "LANGU" = 'E' AND "T
YP" = 'E' AND "DOKVERSION" <= '0001')))
DbSlExecute: rc = 103
Another import Job
(RTF) ########## WARNING ###########
 Without ORDER BY PRIMARY KEY the exported data may be unusable for some databases
(RDI) INFO: /usr/sap/ECS/SUM/abap/migrate_ut/MIGRATE_UT_00063_IMP.STR has format version 2
(RDI) INFO: /usr/sap/ECS/SUM/abap/migrate_ut/SAPTERCL3.STR.logical has format version 2
(DCL) INFO: found logical cluster description for TERCL3 in /usr/sap/ECS/SUM/abap/migrate_ut/SAPTERCL3.STR.logical
(DDL) ERROR: no DDL for TERCL3
(build_ddl_stmt).
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) INFO: TERCL3 merged #20140906205315
(DDL) ERROR: no DDL for TERMC3
(build_ddl_stmt).
(IMP) INFO: a failed DROP attempt is not necessarily a problem
DbSl Trace: prepare() of C_0002, rc=1, rcSQL=259
DbSl Trace: PREPARE C_0002 on connection 0, rc=259
ERROR HDBexistsRow: Prepare/Read failed (dbrc=103).
(SQL error 259)
error message returned by DbSl:
invalid table name: Could not find table/view TERMC3 in schema SAPECS: line 1 col 58 (at pos 57)
(RDI) INFO: /usr/sap/ECS/SUM/abap/migrate_ut/SAPTERCL3.STR.logical has format version 2
(DCL) INFO: found logical cluster description for TERCL3 in /usr/sap/ECS/SUM/abap/migrate_ut/SAPTERCL3.STR.logical
(SQL) INFO: Searching for SQL file SQLFiles.LST
(SQL) INFO: found SQLFiles.LST
(SQL) INFO: Trying to open SQLFiles.LST
(SQL) INFO: SQLFiles.LST opened
(SQL) INFO: Searching for SQL file SSEXC.SQL
(SQL) INFO: SSEXC.SQL not found
(DB) INFO: TERCL3^0 dropped
(DB) INFO: TERCL3^0 created #20140906205315
(SQL) INFO: Searching for SQL file SDOCU.SQL
(SQL) INFO: SDOCU.SQL not found
ERROR exec_ddl_stmt: (DB) ERROR: DDL statement failed
(ALTER TABLE "TERMC3" DROP CONSTRAINT "TERMC3^0")
DbSlExecute: rc = 103
(SQL error 259)
error message returned by DbSl:
invalid table name: TERMC3: line 1 col 13 (at pos 12)
(IMP) INFO: a failed DROP attempt is not necessarily a problem
ERROR exec_ddl_stmt: (DB) ERROR: DDL statement failed
(ALTER TABLE "TERMC3" ADD CONSTRAINT "TERMC3^0" PRIMARY KEY ( "SPRAS", "TERM", "LINENUMBER" ) )
DbSlExecute: rc = 103
(SQL error 259)
error message returned by DbSl:
invalid table name: TERMC3: line 1 col 13 (at pos 12)
(RDI) INFO: /usr/sap/ECS/SUM/abap/migrate_ut/SAPTERCL3.STR.logical has format version 2
(DCL) INFO: found logical cluster description for TERCL3 in /usr/sap/ECS/SUM/abap/migrate_ut/SAPTERCL3.STR.logical
(DDL) ERROR: no DDL for TERCL3
(build_ddl_stmt).
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) INFO: TERCL3 unloaded #20140906205315
(DDL) ERROR: no DDL for TERMC3
(build_ddl_stmt).
(IMP) INFO: a failed DROP attempt is not necessarily a problem
ERROR exec_ddl_stmt: (DB) ERROR: DDL statement failed
( ALTER TABLE "TERMC3" enable persistent merge )
DbSlExecute: rc = 103
(SQL error 259)
error message returned by DbSl:
invalid table name: TERMC3: line 1 col 56 (at pos 55)
(DB) INFO: disconnected from DB

Result of that table issue fix is that migration went ahead, finished both uptime and downtime run. Now i am trying to login to SAP and system is unable to log me in as DOKTL doesnt exist at all
But i see another table called DTELDOKTL in HANA, which same as DOKTL but no entries in it.
I have created a message to SAP , But what should i be doing now ?
Can i create this table in HANA ?
Can i do export/import of table ? Table structure should be there in system already for this option i guess.
Would i be able to replicate this table if i setup SLT ?
Please advise
C Mon Sep 8 11:02:30 2014
C *** ERROR => prepare() of C_0341, rc=1, rcSQL=259
[dbsdbsql.cpp 1397]
C {root-id=00505680721D1EE48DE09241702FF193}_{conn-id=00000000000000000000000000000000}_0
C *** ERROR => PREPARE C_0341 on connection 0, rc=259
[dbslsdb.cpp 9138]
C SQLCODE : 259
C SQLERRTEXT : invalid table name: Could not find table/view DOKTL in schema SAPECS: line 1 col 97 (at pos 96)
C sc_p=7f28f48cfac8,no=341,idc_p=7f28f3f87388,con=0,act=0,slen=254,smax=256,#vars=5,stmt=7a45980,table=DOKTL
C stmtid = <0/SAPMSYST /50334994/20140907170329>
C SELECT "ID" , "OBJECT" , "LANGU" , "TYP" , "DOKVERSION" , "LINE" , "DOKFORMAT" , "DOKTEXT" FROM "DOK\
C TL" WHERE "LANGU" = ? AND "ID" = ? AND "OBJECT" = ? AND "TYP" = ? AND "DOKVERSION" = ? ORDER BY "ID"\
C , "OBJECT" , "LANGU" , "TYP" , "DOKVERSION" , "LINE" ;
B ***LOG BZA=> table DOKTL does not exist on database R/3 [dbdbslst 3580]
M ThPerformDeleteThisSession: switch of statistics
D GuiStatus clear generate inline ts >20140908030105,195<
M ***LOG R47=> ThResFreeSession, delete () [thxxmode.c 1078]
M *** WARNING => ThrtGuiDeleteScreen: rscpGetUserLoginLang failed (128), use system language [thrtGuiHandl 469]
Thanks,
GR

Sqlplus, error with some chars at begining of line

I have a file test.sql with:
DECLARE
    x varchar(4000);
BEGIN
    x := 'my test
# line error 1
@ line error 2
end of test';
    dbms_output.put_line(x);
END;at sqlplus i run it like this
SQL>@test.sql
SP2-0734: unknown command beginning "line error..." - rest of line ignored.
SP2-0310: unable to open file "line.sql"
8 How can I make sqlplus ignore # and @?
Add --@ or --# does not solve my problem, because its part of a text.

>
How can I make sqlplus ignore # and @?
>
It is the @ that is the problem.
Put an escape character (default \) before the @ or set a new escape char.
See SET ESCCHAR in the SQL*PLUS doc
http://docs.oracle.com/cd/E11882_01/server.112/e16604/ch_twelve040.htm#sthref2081
>
SET ESCCHAR {@ | ? | % | $ | OFF}
Specifies a character to be escaped and not interpreted when used in a file name for
the SPOOL, START, @, RUN and EDIT commands. These special characters are
translated to the following:
■ @ in a filename will be translated to Oracle SID
■ ? is translated to Oracle Home in Unix
■ % is translated to Oracle Home in Windows
■ $ is translated to Oracle Home in certain platforms
While it is not recommended that these characters are used in filenames, if you have
legacy files that do use them, it might be useful to include a SET ESCCHAR command
in your GLogin file to implement it across your site.
If not escaped, the characters @, ?, % and $ have significance when interpreted and
cause errors for the SPOOL, START, @, RUN and EDIT commands.
SET ESCCHAR is set OFF by default.
Example
If you include the character ’$’ in your filename, then
SET ESCCHAR $
RUN MYFILE$
behaves normally.

AMS Setup Manager Diagnostics Test erroring with "invalid snapshot" error

While running the Diagnostic Test for Setup Manager on the AMS, it's failing with errors in the below stages.
* Testgroup: CheckEBSHome
* Testgroup: CheckAgentStage
* Testgroup: CheckAgentHome
with below error
Snapshot information is not populated
Any idea?
Regards
Sree

OID Setup Diagnostics Test failing due to this 11510 Home Page is redirecting to SSO page, if give login details, i am not able to login to 11510 instance.i created OID user same as 11510 user. i am getting internal server error in the browser.
Thanks,
Panneer.

[Solved] was getting errors with wine, but found patched linux version

Installed wine for the first time, following the wiki and reading most of the things linked there (such as the winehq faq for disabling winemenubuilder), made separate WINEPREFIXs for 32 and 64 bit, then unzipped a program (Meritous) into the 32 bit prefix's "Program Files" and--
[solitudesands@TheEntireBracadaDesert Meritousness]$ WINEPREFIX=~/w32 wine Meritous.exe
wine: cannot find L"C:\\windows\\system32\\winemenubuilder.exe"
err:wineboot:ProcessRunKeys Error running cmd L"C:\\windows\\system32\\winemenubuilder.exe -a -r" (2)
fixme:keyboard:X11DRV_LoadKeyboardLayout L"00000409", 0080: stub!
fixme:keyboard:X11DRV_LoadKeyboardLayout L"00000409", 0001: stub!
wine: Unhandled page fault on read access to 0x00000034 at address 0x7bc3c8a1 (thread 0009), starting debugger...
At which point the bug reporting wine function pops up offering this:
Unhandled exception: page fault on read access to 0x00000034 in 32-bit code (0x7bc3c8a1).
Register dump:
CS:0023 SS:002b DS:002b ES:002b FS:0063 GS:006b
EIP:7bc3c8a1 ESP:005533c0 EBP:005533d8 EFLAGS:00010206( R- -- I - -P- )
EAX:7e64c301 EBX:7bcc7000 ECX:005533f0 EDX:7e6d7280
ESI:00000020 EDI:00000000
Stack dump:
0x005533c0: 00682af8 7bc3c896 005533f0 7e6cf000
0x005533d0: 0067fb40 00000000 00553408 7e65e39c
0x005533e0: 00553438 7e663856 7e64c301 7e65e39c
0x005533f0: 00000020 00553410 00553448 7e65e374
0x00553400: 00553420 7e6cf000 00553468 7e663e7f
0x00553410: 00682af8 00682af8 00000040 7e663e7f
000c: sel=0067 base=00000000 limit=00000000 16-bit r-x
Backtrace:
=>0 0x7bc3c8a1 RtlEnterCriticalSection+0x21() in ntdll (0x005533d8)
1 0x7e65e39c MSVCRT__lock_file+0x3b() in msvcrt (0x00553408)
2 0x7e663e7f MSVCRT_fread+0x5e() in msvcrt (0x00553468)
3 0x00401b28 in meritous (+0x1b27) (0x0067fbd8)
4 0x004213f6 in meritous (+0x213f5) (0x0067fc08)
5 0x004215b7 in meritous (+0x215b6) (0x0067fd88)
6 0x00420f0b in meritous (+0x20f0a) (0x0067fe00)
7 0x0040122d in meritous (+0x122c) (0x0067fe20)
8 0x00401258 in meritous (+0x1257) (0x0067fe30)
9 0x7b85c48c call_process_entry+0xb() in kernel32 (0x0067fe48)
10 0x7b85d54a in kernel32 (+0x4d549) (0x0067fe78)
11 0x7bc7c610 call_thread_func_wrapper+0xb() in ntdll (0x0067fe98)
12 0x7bc7f50f call_thread_func+0xde() in ntdll (0x0067ff88)
13 0x7bc7c5ee RtlRaiseException+0x21() in ntdll (0x0067ffb8)
14 0x7bc51441 call_dll_entry_point+0x440() in ntdll (0x0067ffd8)
15 0xf7553a8d wine_call_on_stack+0x1c() in libwine.so.1 (0x00000000)
16 0xf7553c0a wine_switch_to_stack+0x29() in libwine.so.1 (0xff90b0a8)
17 0x7bc56bd5 LdrInitializeThunk+0x1f4() in ntdll (0xff90b0f8)
18 0x7b8634f2 __wine_kernel_init+0x871() in kernel32 (0xff90c268)
19 0x7bc57a33 __wine_process_init+0x162() in ntdll (0xff90c2d8)
20 0xf7551643 wine_init+0x2f2() in libwine.so.1 (0xff90c348)
21 0x7bf00db2 main+0x81() in <wine-loader> (0xff90c7a8)
22 0xf738de5e __libc_start_main+0xdd() in libc.so.6 (0x00000000)
0x7bc3c8a1 RtlEnterCriticalSection+0x21 in ntdll: movl 0x14(%esi),%eax
Modules:
Module Address Debug info Name (68 modules)
PE 230000- 24a000 Deferred sdl_image
PE 400000- 473000 Export meritous
PE 10000000-10046000 Deferred sdl
PE 60400000-60475000 Deferred sdl_mixer
ELF 7b800000-7ba5a000 Dwarf kernel32<elf>
\-PE 7b810000-7ba5a000 \ kernel32
ELF 7bc00000-7bce4000 Dwarf ntdll<elf>
\-PE 7bc10000-7bce4000 \ ntdll
ELF 7bf00000-7bf04000 Dwarf <wine-loader>
ELF 7dcbc000-7dce0000 Deferred imm32<elf>
\-PE 7dcc0000-7dce0000 \ imm32
ELF 7dd02000-7dd08000 Deferred libxfixes.so.3
ELF 7dd08000-7dd13000 Deferred libxcursor.so.1
ELF 7dd13000-7dd26000 Deferred libxi.so.6
ELF 7dd26000-7dd2a000 Deferred libxcomposite.so.1
ELF 7dd2a000-7dd35000 Deferred libxrandr.so.2
ELF 7dd35000-7dd40000 Deferred libxrender.so.1
ELF 7dd40000-7dd46000 Deferred libxxf86vm.so.1
ELF 7dd46000-7dd4a000 Deferred libxinerama.so.1
ELF 7dd4a000-7dd70000 Deferred libxcb.so.1
ELF 7dd70000-7dea7000 Deferred libx11.so.6
ELF 7dea7000-7debc000 Deferred libxext.so.6
ELF 7dee0000-7df72000 Deferred winex11<elf>
\-PE 7def0000-7df72000 \ winex11
ELF 7df72000-7e090000 Deferred opengl32<elf>
\-PE 7df90000-7e090000 \ opengl32
ELF 7e090000-7e1cc000 Deferred wined3d<elf>
\-PE 7e0a0000-7e1cc000 \ wined3d
ELF 7e1cc000-7e240000 Deferred ddraw<elf>
\-PE 7e1d0000-7e240000 \ ddraw
ELF 7e253000-7e27c000 Deferred libexpat.so.1
ELF 7e27c000-7e2b8000 Deferred libfontconfig.so.1
ELF 7e2b8000-7e32b000 Deferred libpcre.so.1
ELF 7e32b000-7e436000 Deferred libglib-2.0.so.0
ELF 7e436000-7e492000 Deferred libharfbuzz.so.0
ELF 7e492000-7e4d0000 Deferred libpng16.so.16
ELF 7e4d0000-7e4e1000 Deferred libbz2.so.1.0
ELF 7e4e1000-7e4f8000 Deferred libz.so.1
ELF 7e4f8000-7e59c000 Deferred libfreetype.so.6
ELF 7e59c000-7e601000 Deferred libncursesw.so.5
ELF 7e625000-7e6d9000 Dwarf msvcrt<elf>
\-PE 7e640000-7e6d9000 \ msvcrt
ELF 7e6d9000-7e704000 Deferred msacm32<elf>
\-PE 7e6e0000-7e704000 \ msacm32
ELF 7e704000-7e786000 Deferred rpcrt4<elf>
\-PE 7e710000-7e786000 \ rpcrt4
ELF 7e786000-7e8bf000 Deferred ole32<elf>
\-PE 7e7a0000-7e8bf000 \ ole32
ELF 7e8bf000-7e930000 Deferred advapi32<elf>
\-PE 7e8d0000-7e930000 \ advapi32
ELF 7e930000-7ea51000 Deferred gdi32<elf>
\-PE 7e940000-7ea51000 \ gdi32
ELF 7ea51000-7eba7000 Deferred user32<elf>
\-PE 7ea60000-7eba7000 \ user32
ELF 7eba7000-7ec5e000 Deferred winmm<elf>
\-PE 7ebb0000-7ec5e000 \ winmm
ELF 7ef8f000-7efdc000 Deferred libm.so.6
ELF 7efdf000-7efe6000 Deferred libxdmcp.so.6
ELF 7efe6000-7f000000 Deferred version<elf>
\-PE 7eff0000-7f000000 \ version
ELF f734d000-f7352000 Deferred libdl.so.2
ELF f7352000-f7360000 Deferred libnss_files.so.2
ELF f7372000-f7376000 Deferred libxau.so.6
ELF f7376000-f752e000 Dwarf libc.so.6
ELF f752e000-f754a000 Deferred libpthread.so.0
ELF f754a000-f7703000 Dwarf libwine.so.1
ELF f7704000-f7728000 Deferred ld-linux.so.2
ELF f7728000-f7729000 Deferred [vdso].so
Threads:
process tid prio (all id:s are in hex)
00000008 (D) C:\Program Files\Meritousness\Meritous.exe
00000009 0 <==
0000000e services.exe
0000001d 0
0000001c 0
00000016 0
00000014 0
00000010 0
0000000f 0
00000012 winedevice.exe
0000001b 0
00000018 0
00000017 0
00000013 0
00000019 plugplay.exe
0000001f 0
0000001e 0
0000001a 0
00000020 explorer.exe
00000021 0
System information:
Wine build: wine-1.7.28
Platform: i386
Host system: Linux
Host version: 3.16.3-1-ARCH
However, unlike the few dozen other threads also including "Unhandled page fault on read access", I don't have any other errors to work with, and my backtrace is 23 lines instead of the usual 2-3. I've tried 'pacman -Ss' for various libraries and drivers like in the other threads, but there doesn't appear to be anything I'm missing. Also, the game isn't in the appdb, so I can't look there for help.
I'm figuratively flying blind, from newbiness and from lack of understandable, so any more experience with random failures like this would be appreciated.
Help?
Edit: Oh, and if you're wondering why I don't just compile from source, it's because that version always crashes halfway through the game; I'll be copying my saves from that version to this one if I get it running.
Last edited by Torignit (2014-10-15 11:04:00)

You'd better choose to build it from the AUR with makepkg and install it with pacman:
https://wiki.archlinux.org/index.php/AU … Guidelines
But nice that you could now play with it.
Concerning Wine: I didn't see this game in the WineHQ - Wine Application Database
Maybe it doesn't work with Wine.
Last edited by berbae (2014-10-16 09:52:19)

OracleXMLQuery fails with invalid UTF-8 character

All -
While using OracleXMLQuery API to pull the data back as a DOM. The internal parser has a fatal error with invalid UTF-8 data stored in the XML data.
Is it possible to use the setXSLT() method to transform the data before the DOM is attempted to be built. Or some other method within the OracleXMLQuery API to alter the invalid XML data before an attempt is made to parse it?
Note: The database will have non-UTF-8 data; Presently beyond our control.

Hi,
Are the files from the Java-CD fully readable and fully copied, for instance the java-dumpfile ?
Ensure JVM settings of note # 716604 area applied. Also, is connect possible to database by 'configtool' or does it throw an error ?
Br,
Javier

MSI installer closes with error 1327, Invalid drive on Win 7 Ultimate when My Documents is moved to a network drive

I have several computers with Windows 7 Ultimate installed here at the Pioneer Library System. We have ~20 workstations running XP Pro on a Active Directory domain and are planning on rolling out Windows 7 this fall. I am running Windows 7 to test our programs
(have since RC1) but I am running into an issue when installing software.
The problem I am running into is that when I try to install any program that uses the MSI installer on Windows 7 , it fails with a 1327 error at the point where it is preparing to install and says "Invalid Drive H:\".
All the users in our domain have the "Home Folder" on their active directory profile set to
H:\ (which is mapped to \\PrimaryDC\user$ in the same place). We have also moved the
C:\Users\user\Documents folder to H:\ so as to keep all documents on the server where they get backed up regularly.
If I move "Documents" back to C:\Users\user\Documents the MSI installer works fine. When I look into the registry as suggested in
this thread I found that in "HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders " and in "HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell
Folders " the key "Personal" points to "H:\".
But, H:\ is a valid connected network drive. Installing from the same account on an XP computer with
C:\Documents and Settings\user\My Documents moved to the H:\ drive works fine.
I have tried setting up another 7 machine and get exactly the same results on it.
Is there a workaround for this besides creating a admin account that does not have Documents mapped to the network drive
H:\ to use for installing programs?
Thanks
Aaron Z
PLS

I do not have the option with some of these files to pass parameters to the MSI installer. For example, if I download the Acrobat Reader installer from http://ardownload.adobe.com/pub/adobe/reader/win/9.x/9.3/enu/AdbeRdr930_en_US.exe and run AdbeRdr930_en_US.exe
it extracts the MSI file to C:\Users\USER\AppData\Local\Adobe\Reader 9.3\Setup Files and then runs it.
To reproduce this an a Windows 7 computer (does not have to be on a domain):
Prep Work:
Create a user (test1)
Create a folder on the root of C (C:\Test)
Set permissions on C:\Test to allow the test1 user to have full access to it
Share the C:\Test folder as test1 (again, set the permissions to allow the test1 user full access)
Set the "Home Folder" for the test1 user connect to Z: and point that to \\127.0.0.1\test1
Login as test1
Check that you have Z:\ mapped and that it works
Check that it works:
Install Acrobat Reader 9.3 from the link above
Note that it works
Uninstall Acrobat Reader 9.3 using "Programs and Features"
Break it:
Login as test1
Check that you have Z:\ mapped and that it works
Go to C:\Users\test1
Right click on the Documents folder and click on properties
Click on the Location tab
Click on "Browse" and select the Z drive
Allow Windows to move the files to the new location
Check that it is broken:
Check that you have access to the new Documents folder at Z:\
Install Acrobat Reader 9.3 from the link above
Note that it extracts itself to C:\Users\test1\AppData\Local\Adobe\Reader 9.3\Setup Files
and runs the MSI installer from there
Note that after the MSI installer is started it pops up an error saying Error: 1327, Invalid drive Z:\.
I also see this with various other install programs (VMWare vSphere Client, VMWare Player and Kaspersky Antivirus for example)
Is there any reason why this should not work? Is there something that I should be doing differently?
Thanks
Aaron Z

Netflix viewed perfect for over a month, then it didn't with this error msge: Invalid URL The requested URL "/home", is invalid. Reference #9.9d0bc841.1320231048.92bcc44 --What's up with this now?

Been watching Netflix on my Verizon HP Notebook, it's less than 3mo old. runs windows xp...pretty standard stuff. Anyway tried to login to netflix and Firefox gave this error message--Invalid URL
The requested URL "/home", is invalid. Reference #9.9d0bc841.1320231048.92bcc44 -- I called Netflix & there system running perfectly. My pc running perfectly as well. Logged into netflix using IE--worked just fine. So by process of elimination, it's Firefox's Problem! I have NO CLUE about it, never seen it before on ANY browser. Tried opening & closing FFx, restarting puter, etc...Don't know what else to tell you except Firefox works on every other website now EXCEPT NETFLIX, it's the darnedest (I know that's not a word LOL) I've seen--it happened 10/2/11 @ about 3am!

As I understand:
The procedure works.
The link 'appears' to work. (ie you saw the procedure run a 2nd at the database level)
But it doesn't actually work (because you get a 404)
I think I ran into an issue, on a completely different page type, that produced an 'error 404'. (I can't seem to reproduce it, though)
The only way I discovered what was really going on was with an HTTP sniffer. (eg HTTPFox for FireFox)
Through that, I noticed that the browser was (for some reason) calling a completely non-sensible APEX page. (hence the PAGE NOT FOUND error)
My solution was to add a "submit to self" branch point.
If that doesn't work, I'm at a loss.
MK

Getting error in mapping execution Invalid CHAR

hi
i am having file to RFC scenario, and the input file is an xml file and i am getting erron in mapping as below but when i download the payload and load it in the integration repository mapping tool ,i am able to execute it succesfully. i think the problem is with the encoding , i tried with processing it in utf-8 and ansi. both the format it is giving the sam error.
<SAP:Stack>Runtime exception occurred during application mapping com/sap/xi/tf/_MMMMMMMMM_; com.sap.aii.utilxi.misc.api.BaseRuntimeException:Fatal Error: com.sap.engine.lib.xml.parser.ParserException: Invalid char #0xb (:main:, row:1, col:4~</SAP:Stack>
regards
sandeep

>> This is possible only with PI 7.1 ehp1.
Yes !Our verstion is SAP EHP 1 for SAP NetWeaver 7.1 so how can i do this.
__instead for fixing in PI i can use the belwo java mapping__
import java.io.InputStream;
import java.io.OutputStream;
import java.util.HashMap;
import java.util.Map;
import com.sap.aii.mapping.api.StreamTransformation;
import com.sap.aii.mapping.api.StreamTransformationConstants;
import com.sap.aii.mapping.api.StreamTransformationException;
public final class MyMapping implements StreamTransformation {
 public void execute(InputStream in, OutputStream out)
 throws StreamTransformationException {
 // removing non valid characters
 BufferedReader br = new BufferedReader(in);
 out = stripNonValidXMLCharacters(br.readLine());
 // implement mapping ...
public String stripNonValidXMLCharacters(String in) {
 StringBuffer out = new StringBuffer(); // Used to hold the output.
 char current; // Used to reference the current character.
 if (in == null || ("".equals(in))) return ""; // vacancy test.
 for (int i = 0; i < in.length(); i++) {
 current = in.charAt(i); // NOTE: No IndexOutOfBoundsException caught here; it should not happen.
 if ((current == 0x9) ||
 (current == 0xA) ||
 (current == 0xD) ||
 ((current >= 0x20) && (current <= 0xD7FF)) ||
 ((current >= 0xE000) && (current <= 0xFFFD)) ||
 ((current >= 0x10000) && (current <= 0x10FFFF)))
 out.append(current);
return out.toString();
regards
sandeep
Edited by: pendyalas on Feb 4, 2011 2:07 PM

XML Parser error Invalid Char

When using proxy to download data from ECC to XI -- XML parser throws this error --
com.sap.aii.utilxi.misc.api.BaseRuntimeException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: Invalid char #0x1a(:main:, row:1, col:50831067) at com.sap.aii.mappingtool.tf3.Transformer.checkParserException
Is there are setting to handle such hexadecimal charaters?
Right now the option is to use java code to scan this XML document for such char's and replace with space before message mapping....I am eager to know a better solution .Thanks

Hi,
Did you ever get an answer to this question?
I'm seeing a similar issue where ECC is sending an invalid character 0x13 in an XML message. I would have expected the adapter to encode this properly in an XML document.
Isn't this basic, foundational stuff? It's preparing and sending an invalid XML document.
What am I missing and/or what is ECC missing?

Getting Error with date parameter field -"Invalid DATE"

Hi
I created a report with 9.2 version. And i created 2 date parameter fields in it. And within crystal reports it works fine.
But If, I call from the VS2005 crystalreport.net(report document) SDK , i am getting error as Invalid Date" enter a Date Value". Actually it is a dtp control. how can i modify it.

There's not enough details to get a good understanding of your scenario, but it sounds like you're using some kind of date control to retrieve the date value and pass it to the report's parameter field at runtime. If this is correct, it sounds like the format of the date value from the control may not be what the report is expecting. To debug, I would first use hardcoded values when you set the report parameter fields to see what works. Then compare that to what the return value is from the control to see if they match. I suspect the formats differ. I did a quick search on the BOBJ kbase and found a couple of articles that may help you. I recommend searching as there are lots of information on how to set parameter fields at runtime. <a href="http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=c2010247&sliceId=&dialogID=8582434&stateId=1 0 8584068" target="_blank">c2010247</a><a href="http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=c2010251&sliceId=&dialogID=8582434&stateId=1 0 8584068" target="_blank">c2010251</a>-MJ

Invalid Char could not be found in PSA. Why?

I got an error message in the process chain at DSO activation level. The DSO activation level got failed and shows red.
But in the DTP monitor the QM status shows green. The display message shows
1. @5C@     Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0REVISION     @35@
2. @5C@     Value '#' (hex. '0023') of characteristic 0REVISION contains invalid characters     @35@
3. @5C@     Process 000347 returned with errors     @35@
in PSA the data package has 332 with 20000 records for every package. I couldn't find the invalid chars for info object 0revision. I could see the 0revision in the PSA. But how to get the exact error row with these above information.
any idea?????
Thanks,
Draj S.

Hi,
as you said there are 332 data packages with 20K records each, in which datapackage have you checked for the error record?
check the record no 347 which may be having the error record - try to edit it save the records in PSA and repeat the load and activate the data.
3rd column is the data request number -- check for the data record no 347 and check for the value for 0revision. if there are any special char like # in your case try to edit the record and reload.
Regards
KP

Smartview: XML Load Error: An invalid character was found in text content.

Hi,
Im using hyperion 11.1.2.1 with SmartView installed with Office 2007. A lot of forms are working fine on it but we have entered data recently on a number of them and we are unable to open them in SmartView either through the icon and menu options in workspace or through the smartview panel in excel 2007. The error we are getting is "XML Load Error: An invalid character was found in text content."
Cheers,
Imran

Have a look on Oracle Support - "SmartView XML Load Error: "An Invalid Character was Found in Text Content" [ID 968808.1]"
It may be the same issue as you are experiencing.
Cheers
John
http://john-goodwin.blogspot.com/

Receiving "Invalid char in text." error from file adapter

I'm testing a file adapter and am receiving the following error:
Invalid char in text.
The invalid character seems to be the ascii Record Separator character, Hex 1E, HTML 

Is it possible for me to modify the file adapter schema to handle this character?

The HTML description should have been this (minus space characters)
& # x a ;

Load data error: Database selection with invalid cursor (sm21)

hi experts,
when I execute processchar, it occur some system error:
"Database selection with invalid cursor ",
"Documentation for system log message BY 7 :
The database interface was called by a cursor (in a FETCH or CLOSE
cursor operation) that is not flagged as opened. This can occur if a
COMMIT or ROLLBACK was executed within a SELECT loop (which closes all
opened cursors), followed by another attempt to access the cursor (for
example, the next time the loop is executed). "
the error msg occur when apply bw support package19.
data from DSO to CUBE, Transferred Recodes is not zero, but Added Recodes is zero.
Request status always yellow, process is running.
current sys info: BI7 and BW19, BASIS17,PI_BASIS17, the database is oracle10g R2.
thanks for your help.

I have solved this issue, The Oracle checkpoint not complete.
thanks,
xwu.

Error with invalid chars found in characteristics

Similar Messages

Maybe you are looking for