Error with SI model residual Analysis.vi

Hello,
I am using the system identification VIs in order to obtain a model of my system. I obtained some results, but I have a problem using the SI model residual Analysis.vi. Everytime that I used it I got the error:
Error -41219
System Identification Toolset: The stimulus and response signals and the estimated model do not have the same sampling rate.
I have tried some different solutions, but no one worked. Please if anyone have an idea I really apreciate it.

Can you post your code so we can troubleshoot it?
John B.
Embedded Networks R&D
National Instruments
Certified LabVIEW Developer

Similar Messages

Problem with Data Model and Analysis View

I create an analyze in BI Publisher and then i create a data model using this object.
When i try to generate an XML with a number of rows the BI Publisher return an empty XML (Only with de DATA_DS tags but no data).   To bypass this problem i make and XML file by hand and this allow me to create reports and design it but when i try to view the reports i got the message that says "No Data Found".
So i was check the analysis and all looks appears to be fine, In the results tab it show me a complete table with the data i was looking to use.
So i try to repeat the error and when i try to create the XML for the Data Model i found this two error in the logs:
[root@server ~]# [2013-07-17T16:37:22.844-04:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 2361] [userId: <anonymous>] [ecid: ad7bb40a72b553c0:-3e5f91c5:13ecd037992:-8000-00000000000e2b34,0] [APP: bipublisher#11.1.1] Incomplete xslt._XDONFSEPARATORS: decimal separator: null, grouping separator: null
[2013-07-17T16:37:26.828-04:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 2361] [userId: <anonymous>] [ecid: ad7bb40a72b553c0:-3e5f91c5:13ecd037992:-8000-00000000000e2b3a,0] [APP: bipublisher#11.1.1] Incomplete xslt._XDONFSEPARATORS: decimal separator: null, grouping separator: null
[2013-07-17T16:37:26.865-04:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 2361] [userId: <anonymous>] [ecid: ad7bb40a72b553c0:-3e5f91c5:13ecd037992:-8000-00000000000e2b3a,0] [APP: bipublisher#11.1.1] oracle.xdo.servlet.CreateException: Path: /FOLDER/MODEL.xdm is not pointing to a report. Actual type: ReportItem, sub-type: DataModel[[
        at oracle.xdo.servlet.ReportException.fillInStackTrace(ReportException.java:124)
        at java.lang.Throwable.<init>(Throwable.java:196)
        at java.lang.Exception.<init>(Exception.java:41)
        at oracle.xdo.servlet.ReportException.<init>(ReportException.java:36)
        at oracle.xdo.servlet.CreateException.<init>(CreateException.java:18)
        at oracle.xdo.servlet.ReportRepository.getReport(ReportRepository.java:104)
        at oracle.xdo.servlet.ReportRepository.getReport(ReportRepository.java:128)
        at oracle.xdo.servlet.dataengine.DataProcessorFactory.getDataModelPath(DataProcessorFactory.java:207)
        at oracle.xdo.servlet.dataengine.DataProcessorFactory.isSemanticLayerDataModel(DataProcessorFactory.java:99)
        at oracle.xdo.servlet.dataengine.DataProcessorFactory.isSemanticLayerDataModel(DataProcessorFactory.java:78)
        at oracle.xdo.servlet.ReportModelContextImpl.getReportXMLData(ReportModelContextImpl.java:157)
        at oracle.xdo.servlet.CoreProcessor.process(CoreProcessor.java:346)
        at oracle.xdo.servlet.CoreProcessor.generateDocument(CoreProcessor.java:101)
        at oracle.xdo.servlet.ReportImpl.renderBodyHTTP(ReportImpl.java:1074)
        at oracle.xdo.servlet.ReportImpl.renderReportBodyHTTP(ReportImpl.java:639)
        at oracle.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:492)
        at oracle.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:462)
        at oracle.xdo.servlet.XDOServlet.doGet(XDOServlet.java:280)
        at oracle.xdo.servlet.XDOServlet.doPost(XDOServlet.java:313)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
        at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
        at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
        at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
        at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.xdo.servlet.metadata.track.MostRecentFilter.doFilter(MostRecentFilter.java:64)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.xdo.servlet.security.SecurityFilter.doFilter(SecurityFilter.java:125)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.xdo.servlet.init.InitCheckingFilter.doFilter(InitCheckingFilter.java:63)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
        at java.security.AccessController.doPrivileged(Native Method)
        at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
        at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
        at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
        at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
        at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
        at java.security.AccessController.doPrivileged(Native Method)
        at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
        at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
        at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
        at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
        at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
        at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
        at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
        at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
        at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
        at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
        at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
And when i try to view the report that use the analysis i got this two warning in the logs:
[2013-07-17T16:58:01.615-04:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 57] [userId: <anonymous>] [ecid: ad7bb40a72b553c0:-3e5f91c5:13ecd037992:-8000-00000000000e2d7c,0] [APP: bipublisher#11.1.1] Incomplete xslt._XDONFSEPARATORS: decimal separator: null, grouping separator: null
[2013-07-17T16:58:02.034-04:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 57] [userId: <anonymous>] [ecid: ad7bb40a72b553c0:-3e5f91c5:13ecd037992:-8000-00000000000e2d84,0] [APP: bipublisher#11.1.1] Incomplete xslt._XDONFSEPARATORS: decimal separator: null, grouping separator: null
As i understand there is has a reference to a null value but i cant find what column of the analysis has the problem.
Any ideas about how to solve or debug this?
Thanks

I follow your instructions and it works fine. I can create the XML and the reports can show data.
So, i already know that there is no problem with the data and with the BI Publisher installation but i still doesn know what is the problem with the analysis view that fails.
Any idea how to debug it?
Thanks.

Build Waveform, SI Module Residual Analysis, System Identification MIMO

Hi, I have a question stemming from this page, with the residual analysis model: http://zone.ni.com/reference/en-XX/help/372458D-01/lvsysidconcepts/case_study_validating/#Simulation...
So this is for ARX, a SISO function. I want to do the same with a State Space MIMO function. I'm having some trouble with the Build Waveform, the types for the waveform doesn't match up. It appears there's another dimension to the autocorrelation/crosscorrelation, which is causing some issue. Is there a way I can do this with a MIMO so I can build the waveform?
Thanks,
Andrea
Solved!
Go to Solution.

Hello Andrea,
You should be able to work with the Index Array function and the MIMO Waveform configuration of the SI Model Residual Analysis VI. As seen in the snippet below, you can wire the 2D Waveform array into the Index Array function and the default output will be a 1D Waveform array.
Then, using the Index Array function again, we are left with the waveform that existed in the zeroth row and the zeroth column of that initial 2D Waveform array. Once we have extracted out the desired waveform, we can use the Get Waveform Components function or wire the data directly to an indicator.
When working through this exercise, you may find using the Context Help window to be very useful. With the Context Help Window (press CTRL+H), you can mouse over wires and determine their data type.
For more information concerning array manipulation, I highly recommend looking through the examples in the NI Example Finder’s Fundamentals»Arrays and Clusters directory. You can open the NI Example Finder by navigating to Help»Find Examples....
Cameron F
Applications Engineer
National Instruments

Error With Export/Print from Crystal Report Viewer

Hello there,
I've searched through the web and SAP discussion boards with not much luck with this issue.
After working through this for some days now I've decided to look here for help.
Environment:
I have created a web Crystal Report viewer application(Developed with SBOP BI Platform 4.0 SP06 .NET SDK Runtime) that communicates with a managed Cyrstal Server 2011 SP4 (Product 14.0)
I am able to connect and authenticate with the server, retrieve a token for communication and display reports in the Crystal report Viewer successfully.
Problem:
When I attempt to export, I receive the prompt to select format and pages.
When I click export after selections most times I receive an error with the text
Unable to cast COM object of type 'System.__ComObject' to interface type 'CrystalDecisions.ReportAppServer.DataDefModel.PropertyBag'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{74EEBC42-6C5D-11D3-9172-00902741EE7C}' failed due to the following error: No such interface supported (Exception from HRESULT: 0x80004002 (E_NOINTERFACE)).
Other times the page simply refreshes on export.
When I click to print, no print dialog is displayed the page always refreshes and no error is displayed.
No Print or Export document is ever created.
As many print/export issues seems to be related, I'm guessing this two issues are as well.
Notes:
I am utilizing the ReportClientDocument model
I am storing this in session to use as the crystal report viewer report source on postbacks
I am assigning a subset of export formats to the crystal report viewer
I am setting particular parameters as well on the report source
At this point I would appreciate every assistance I may receive on this issue
Thanks in advance,
Below is the pertinent code
Code:
<aspx>
   <CR:CrystalReportViewer ID="CrystalReportViewer1" runat="server"
   AutoDataBind="true" EnableDatabaseLogonPrompt="False"
   BestFitPage="False" ReuseParameterValuesOnRefresh="True"
CssClass="reportFrame" Height="1000px" Width="1100px" EnableDrillDown="False"
ToolPanelView="None" PrintMode="Pdf"/>
<Codebehind>
using System;
using System.Collections.Generic;
using System.Linq;
using System.Web;
using System.Web.UI;
using System.Web.UI.WebControls;
using CrystalDecisions.Enterprise;
using CrystalDecisions.ReportAppServer.ClientDoc;
using CrystalDecisions.ReportAppServer.CommonObjectModel;
using CrystalDecisions.ReportAppServer.Controllers;
using CrystalDecisions.ReportAppServer.DataDefModel;
using CrystalDecisions.ReportAppServer.ReportDefModel;
using CrystalDecisions.Shared;
namespace ClassicInternalReportPage
    public partial class Reports : System.Web.UI.Page
        protected override void OnInit(EventArgs e)
            base.OnInit(e);
            if (!String.IsNullOrEmpty(Convert.ToString(Session["LogonToken"])) && !IsPostBack)
                SessionMgr sessionMgr = new SessionMgr();
                EnterpriseSession enterpriseSession = sessionMgr.LogonWithToken(Session["LogonToken"].ToString());
                EnterpriseService reportService = enterpriseSession.GetService("RASReportFactory");
                InfoStore infoStore = new InfoStore(enterpriseSession.GetService("InfoStore"));
                if (reportService != null)
                    string queryString = String.Format("Select SI_ID, SI_NAME, SI_PARENTID From CI_INFOOBJECTS "
                       + "Where SI_PROGID='CrystalEnterprise.Report' "
                       + "And SI_ID = {0} "
                       + "And SI_INSTANCE = 0", Request.QueryString["rId"]);
                    InfoObjects infoObjects = infoStore.Query(queryString);
                    ReportAppFactory reportFactory = (ReportAppFactory)reportService.Interface;
                    if (infoObjects != null && infoObjects.Count > 0)
                        ISCDReportClientDocument reportSource = reportFactory.OpenDocument(infoObjects[1].ID, 0);
                        Session["ReportClDocument"] = AssignReportParameters(reportSource) ? reportSource : null;
                        CrystalReportViewer1.ReportSource = Session["ReportClDocument"];
                        CrystalReportViewer1.DataBind();
            //Viewer options
            // Don't enable prompting for Live and Custom
            CrystalReportViewer1.EnableParameterPrompt = !(Request.QueryString["t"] == "1" || Request.QueryString["t"] == "4");
            CrystalReportViewer1.HasToggleParameterPanelButton = CrystalReportViewer1.EnableParameterPrompt;
            CrystalReportViewer1.AllowedExportFormats = (int)(ViewerExportFormats.PdfFormat | ViewerExportFormats.ExcelFormat | ViewerExportFormats.XLSXFormat | ViewerExportFormats.CsvFormat);
        protected void Page_Load(object sender, EventArgs e)
            if (IsPostBack && CrystalReportViewer1.ReportSource == null)
                CrystalReportViewer1.ReportSource = Session["ReportClDocument"];
                CrystalReportViewer1.DataBind();
        private bool AssignReportParameters(ISCDReportClientDocument reportSource)
            bool success = true;
            if (Request.QueryString["t"] == "1" || Request.QueryString["t"] == "2" || Request.QueryString["t"] == "4" )
                reportSource.DataDefController.ParameterFieldController.SetCurrentValue("", "STORE", Session["storeParam"]);
                if (Request.QueryString["t"] == "2")
                    reportSource.DataDefController.ParameterFieldController.SetCurrentValue("", "FromDate", Request.QueryString["fromdate"]);
                    reportSource.DataDefController.ParameterFieldController.SetCurrentValue("", "ToDate", Request.QueryString["todate"]);
            else if (Request.QueryString["t"] == "3")
                reportSource.DataDefController.ParameterFieldController.SetCurrentValue("", "SKU", Request.QueryString["sku"]);
            else
                //Unknown report type alert
                success = false;
            return success;

Thanks Don for your response,
I'm new to the SCN spaces and my content has been moved a couple of times already.
In response to your questions
The runtime is installed on the web application server, if by that you mean the machine hosting the created .NET SDK application.
My question was whether it was also required on the Crystal Server 2011 (I.E. the main enterprise server with CMS and Report management and I guess RAS and all that). I figured this would remain untouched and queries would simply be made against it to retrieve/view reports e.t.c
If install of the SDK on Crystal Server 2011 is indeed required should I expect any interruption to any of the core services after a restart. I.E. I'm hoping that none of the SDK objects would interfere with the existing server objects (in SAP Business Objects)Reason I ask is I note that much of the SDK install directories are similar to the existing Crystal Enterprise Server 2011 (Product 14.0.0)
Is this temp folder to be manually created/configured or is it created by the application automatically to perform tasks. Or are you referring to the default C:\Windows\Temp directory and so saying that the application would try to use this for print and export tasks?Once I'm sure which I'd give the app pool user permission
Printing is to be client side but I figured by default (with the Crystal Report Viewer) it would simply pool and print from the user's printer. This is how it works with the previously used URL reporting approach (viewrpt.cwr). Therefore a user can print the document from wherever they are with their own printer.We don't intend on printing from the server machine, but are you suggesting that a printer must be installed on server (which one web or enterprise server) for any client side printing to work.
App pool is running in 32 bit mode
Initially didn't get anything useful from fiddler but I'd try and look closer on your suggestion.
It's also possible that some of my questions are a misunderstanding of APP vs RAS vs WEB, so please feel free to clarify. Currently I see the Web server as simply the created .NET SDK Application and RAS (Crystal Server 2011 e.t.c) as the existing fully established Application server which I simply pool for information.
Thank you for your patience and advice,

Error while compiling model in Visual Composer 7.1.

Hi,
I am getting a error while compiling model in Visual Composer 7.1.
An exception occurred at the server while running the build process, reason: Extension with id com.sap.vc.runtimeproviders.null not found. For more details please refer to the log file.
Can any one please tell me what the error is?

Hello
This problem usually indicates the model Runtime provider is not set properly
Please goto configure pane and check the RT provider that is et for the model or any other model in the same DC
Also services usages require this property to be set accordingly
To make sure the services are set properly please look into the configuration pane when the respective service usage is selected (and check the same)
Please let me know if this helped or not
Guy

Error while creating new Portfolio Analysis (PS 2013)

Dear Folks,
I am trying to create a new Portfolio Analysis on my production server but getting some weird error message. Although I have configured everything correctly. (PS 2013 without SP1)
6 Generic Resources with Proper Rates, with Position Roles
6 Projects with basic information, with small plan, with resources
Whenever I select "Time-phased Resource Planning" It gives me an Unknown Error. But in ULS Log this is the error message:
Datasets:
AnalysisDataSet
Table Analysis
Row: ANALYSIS_UID='dd5b4cc1-2d6b-e411-93ff-00155d009e11'
Error PlannerHorizonStartDateDoesNotMatchTimeScale (28016) - column
HORIZON_START_DATE
Error PlannerHorizonEndDateDoesNotMatchTimeScale (28017) - column
HORIZON_END_DATE
General
Error:
QueueAnalysisCannotUpdateAnalysis (29682). Details: id='29682' name='QueueAnalysisCannotUpdateAnalysis' uid='53485703-2e6b-e411-93ff-00155d009e11' AnalysisUid='dd5b4cc1-2d6b-e411-93ff-00155d009e11' MessageType='Microsoft.Office.Project.Server.BusinessLayer.QueueMsg.AnalysisMessage'
MessageID='1' Blocking='DontBlock'.
Queue:
GeneralQueueJobFailed (26000) - AnalysisUpdate.AnalysisMessage. Details: id='26000' name='GeneralQueueJobFailed' uid='54485703-2e6b-e411-93ff-00155d009e11' JobUID='e54a3803-2e6b-e411-93ff-00155d009e11' ComputerName='e3b7641f-b9bf-4a1f-a5b3-a641445bd3ea'
GroupType='AnalysisUpdate' MessageType='AnalysisMessage' MessageId='1' Stage='' CorrelationUID='c6b3cb9c-f4ad-b0df-0000-02b15d6add06'. For more details, check the ULS logs on machine
e3b7641f-b9bf-4a1f-a5b3-a641445bd3ea for entries with JobUID
e54a3803-2e6b-e411-93ff-00155d009e11.
Could someone please help me to resolve this issue?
Many thanks
Mohsin Raza

Hi Moshin,
The message indicates that your capacity analysis (resource based) is out of range. It might be due to your planning horizon and granularity settings or to the project start and finish dates in the portfolio properties:
Also what are the start and finish dates of your projects? They cannot be out of the range : 1984 - 2049.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

Error while compiling Model in VC 7.1

Hi,
I am getting a error while compiling model in Visual Composer 7.1.
An exception occurred at the server while running the build process, reason: Extension with id com.sap.vc.runtimeproviders.null not found. For more details please refer to the log file.
Can any one please tell me what the error is?

Hi
The common reason for this kind of error is a misconfigured model or data service proxy
To verify this is not the case please follow these steps:
1. In the DC where you get the error open your models one by one and verify that the runtime provider that is configured is set properly (usually should be WebDynpro but could be Voice or Portal if this is the runtime that you are targeting your application to)
This configuration is accessible in the configure panel when your model is in focus
2. Do the same as described in bullet 1 on your data services' usages as well. Select the usage of the data service and check that the runtime provider is set properly
3. remove any unused service in your DC (this is a good practive regardless of the current problem. To view your data services in a certain DC open the "Manage Models Dialog". Select the "Data Services" entry in the filter dropdown on the top right corner. Drill down into the DC you are clearing and delete services you do not think they are in use. Please note that removing a service must be done carefully since you might delete services that could be in use by other models in the same DC or by dynamic entry list of a control in your model, etc.)
Please let me know if it helped
Guy

Error with Loading Device Software on 8700 AT&T phone.

Hi. I would like some help with my 8700 AT&T refurb blackberry phone. When I tried to download the device software (v4.5) to my already downloaded DTM (v4.6), it gave me an error message I did not know what to do with.
I want to synch my organizer data (calendar, contacts) from older desktop (Outlook 2002) to my new laptop (Outlook 2007, Windows 7). I am having trouble downloading the supporting device software. I keep getting an error message that reads "Error with the Application Loader. Cannot update software using this system as device is currently activated on a blackberry Enterprise Server or professional software. Contact administrator or check with service provider." I do not use Enterprise. I don't have an internet service plan for my phone as I use it only for calendar and contacts. AT&T gives the software option for AT&T 8700 in English device software as v4.1.0.175 as the only option that is supported by my current platform (2.0.0.90). Is this right?
All I really want to update my phone with the latest software that supports Outlook 2007 on my new laptop. What do I need to make that happen?
Thanks in advance.

Hi there!
Refurbs can be problematic. If a BB was ever activated on BES, then it has an IT Policy. IT Policies are not removed by the standard WIPE actions. Rather, they take additional steps to clean off the Policy.
Just to check, please go to this screen:
Homescreen > Options > Security Options > (Information) or (General Settings) or (something similar)
On that screen will be some selection boxes plus other sections (divided by horizontal lines). If, on that screen, there is any discussion about IT Policy (even if it says "Default"), then you indeed have an IT Policy on your BB. (The screen may also have a section for "Services").
If you don't have an IT Policy, then something else is going on...in which case, stop here and report back exactly what you found on that screen.
If you do have an IT Policy, then, in my view, you have two choices.
1) Since this refurb was provided to you by ATT, they did not deliver to you a "clean" device. You could take it back to them and have them clean the IT Policy off.
2) You can remove the Policy yourself. The process is 100% destructive to the data on the BB, so you'll want to be sure you've already taken a good full backup. Then use Method 3 in this KB.
As for what device OS to install, you have more choices than you indicated. See this page:
https://www.blackberry.com/Downloads/browseSoftware.do;jsessionid=0A15EC28AEC181D3F3F9C5235D9F166A.n...
Select, from the drop-down, your model (8700). The resulting screen shows that ATT is currently supporting 4.5.0.182 (MultiLanguage) for your BB model. The MultiLanguage pack will include English, so you don't have to fall all the way back to the English only version. So, you have choices. The best advice is to use the most recent version -- bug fixes, enhancements, and all of that.
What I advise, since you want to use Outlook 2007, is to use that 4.5.0.182 package for your BB and the most recent RIM desktop package (5.0.1.28). That way, you will have full compatibility for what you are looking for.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Tips for blue screen (BSOD) errors with Windows Vista and Intel Turbo Memory on T61/T61p

Important note: The symptoms and solutions described below address only a small subset of the possible causes for blue screen errors, aka BSOD. This information can help address blue screen errors specifically related to Turbo Memory, but may not solve errors related to other issues. Please read through the instructions completely, make sure they apply to your system, and after attempting the solutions please post back with your feedback for the community.
Some users may experience random blue screen errors with ThinkPad
systems running Windows Vista with Intel Turbo Memory hardware. These
blue screens may occur during normal usage on the system or they may
occur when booting into Windows Vista. Blue screens related to the
Intel Turbo Memory hardware may reference a stop code of 8086 with
memory address locations of {0, 0, 0, 0}.
There are two main steps that you can take to help resolve blue screen issues related to Intel Turbo Memory.
Step 1: Update Intel Turbo Memory Driver
If the driver version is before version 1.0.1.1004-7.0.3.1001, please
update to this version.
To determine what version of the Intel Turbo Memory driver is installed:
1.    Click Start, then click Control Panel.
2.    Click System and Maintenance.
3.    Click System.
4.    Click Device Manager.
5.    Expand the Storage controllers category.
6.    Double-click Intel Flash Cache Logic Chip.
7.    Click the Driver tab. Then you will see the driver version (for example, 1.0.1.1004).
The new driver and installation instructions can be found here.
Note: The Intel Matrix Storage Driver is updated with this package.
Step 2: BIOS version
If your BIOS version is older than those listed below, please update to the version listed.
How to check your BIOS version:
Turn off the system.
Turn on the system.
While the To interrupt normal startup, press the blue ThinkVantage button message is displayed at the lower-left area of the screen, press the F1 key.
The
BIOS Setup Utility menu will be displayed. If you have set a supervisor
password, the BIOS Setup Utility menu appears after you enter the
password.
Check BIOS Version and Embedded Controller Version.
Turn off the system.
System BIOS versions:
ThinkPad T61/T61p (14.1 inch widescreen with IEEE 1394 model) - BIOS version 1.22 (7LET52WW)
Please
remember that these updates do not solve every possible system blue
screen, but they do resolve several problems related to the Intel Turbo
Memory driver.
Message Edited by Tim_Lenovo on 11-30-2007 07:03 PM
Tim Supples
Lenovo Social Media
Got a question? Don't PM me, post it on the forum!
Lenovo Blogs
X60 Tablet SXGA+ primary, Z61p fully loaded workhorse

Thanks Tim,
I do have my T61p fully up-to-date to the latest drivers and updates (via System Update and the Drivers&Software web page when the former is not that up-to-date).
At the moment the most recurrent problem is this:
http://forum.lenovo.com/lnv/board/message?board.id=T_Series_Thinkpads&thread.id=55
which has been longly speculated here:
http://forum.thinkpads.com/viewtopic.php?t=47755
My other angst is the boot-time chkdsk hang-up problem:
http://forum.thinkpads.com/viewtopic.php?t=52765&highlight=chkdsk
I just wonder if this purely a Vista issue when using NV cache, the disk spinning down at almost exactly 1 hour from the beginning of the chdsk operation seems too much of a coincidence.
This is my T61p configuration:
Intel Core 2 Duo T7700 2.4GHz
BIOS version 1.26-1.06
4GB RAM 2 SO-DIMMs
nVidia Quadro FX 570m with 512MB VRAM
WUXGA LCD
Seagate 7200.2 160 GB
4GB RAM 2 SO-DIMMs
Windows Vista Ultimate 32bit (waiting to move to 64bit)
thanks,
andrea
Message Edited by abarbieri on 12-05-2007 03:48 PM
T61p - 15.4" - T7700 - FX 570M 256MB - 4GB RAM - ST916023AS - 4965AGN - BT - FPR - 9 cell - Vista Ult. x86
T21p - 14" - PIII 850MHz - S3 Savage/IX 8MB - 512MB RAM - 100GB 7200rpm - WinXP x86

Valuation with material cost estimate: error with product "117122"

Hi people,
We have the error:
=====================
Valuation with material cost estimate: error with product "117122"
Diagnosis
In Profitability Analysis (CO-PA), the system tried to valuate a line item using the current standard cost estimate.
In order to determine the current plan period, the system needs to read the valuation segment of the material master.
The system has found that the current plan period is not filled forproduct "117122" in plant "UBE1".
We have the follow configuration in trans.: KE40:
. Determine material cost estimate
   . Transf. Standard Cost Estimate
. Costing Variant
. Control Data for Standard Cost Estimate
   . Period Indicator = "Current Standard Cost Estimate acc. to entry in mat master
. Addiitonal data CO-PC
    . Transfer cost estimate in controlling area currency "activated"
We think the reason about our error is because the field above is activated and some configuration more is necessary for this case. For examplo: Trans.: OKYW and this one was not configurated yet.
Do you know what happend?
If we need to configure some transation, or sonly process the cost estimate?
Thanks,
Rosana.

Hello Guido
Thank you very much for your return.
It is happenning in a Client that some people are doing the configuration.
Before we didin't have in KE40, the fiel "Transfer cost estimate in controlling area currency" activated.
And now, the people activate that in this new Client and I don't know the impact about that.
I think we have to make the configuration in OKYW.
The other transation you told me, we don't have any information.
Could you tell me some other idea what happend?
Message error is just "Message no. KE350"
Abou claculate the cost:
It was calculated by trans.: CK11N for future planning and the real wasn't not possible to release because this material already have moviments.
Could you tell us is there is some thing more to do?
Thanks,
Rosana.

Error in New Models Creation - Loadbalancing /Single Server locally

Is there any possibility of below error when Creating New Models with Single Server and but NOT Working with Load balancing Option.
The same code worked when connecting to Single Server locally but doesn't work when New models were created by selection of loadbalancing Option on Remote Server..during development on source from DTR Server(SLD)..
I get below error when New Model created with loadbalancing option
Error - com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Error connecting using JCO.Client: null
Edited by: Raghu v on Jan 26, 2008 1:27 PM

Hi,
In EAS, I am getting some for Planning Outline(Essbase outline is working fine), While starting the Planning service through start menu, it throwing error as
Query Failed: SQL_SYSDB_DELETE_EXPIRED_EXTERNAL_ACTIONS:[100]
java.sql.SQLException: [Hyperion][Oracle JDBC Driver][Oracle]ORA-00932: inconsistent datatypes: expected INTERVAL DAY TO SECOND got NUMBER
     at hyperion.jdbc.base.BaseExceptions.createException(Unknown Source)
     at hyperion.jdbc.base.BaseExceptions.getException(Unknown Source)
     at hyperion.jdbc.oracle.OracleImplStatement.execute(Unknown Source)
     at hyperion.jdbc.base.BaseStatement.commonExecute(Unknown Source)
     at hyperion.jdbc.base.BaseStatement.executeUpdateInternal(Unknown Source)
     at hyperion.jdbc.base.BasePreparedStatement.executeUpdate(Unknown Source)
     at com.hyperion.planning.sql.HspSQLImpl.executeUpdate(Unknown Source)
     at com.hyperion.planning.sql.HspSQLImpl.executeUpdate(Unknown Source)
     at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unknown Source)
     at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source)
Error encountered with Database connection, recreating connections.
Nested Exception: java.sql.SQLException: [Hyperion][Oracle JDBC Driver][Oracle]ORA-00932: inconsistent datatypes: expected INTERVAL DAY TO SECOND got NUMBER
Thanks,
CP

Error in BI4 SP04 Olap Analysis Using Portal iview list template

We are trying to host the BI Launch Pad BI4 SP04.1 in the SAP Enterprise Portal (7.3.1.Sp04) on AIX 6.1 using the SAP Business Objects Document List Template, but getting an error when trying to use Olap for Analysis.
When previewng the iview from the portal, the bilaunch pad is opened and the main page is displayed
Then we select the icon Analysis for Olap, select an Olap connection and receive error in
message box titled 'Analysis Edition for Olap'
Login Failed. Invalid, User Name or Password
It seems to be problem with SSO token back to the SAP portal.
We have SSO configured from BI4 SP04.0.1 to BW 7.3.1. SP04 and can login to the launch pad using SAP authentication with the same account.
The security on the OLAP connection is everyone - view.
If we change the Olap connection authentication to pre-defined from SSO, Olap Analysis works correctly from the portal iview, but of course the permissions are not acceptable. Further, we set SSO to false from the global.properties file and restarted tomcat. We can then start the launchpad from the Iview in the portal and are prompted for manual logon, use SAP authentication and Olap for Analysis runs correctly as the same user we tried previously.
However, our requirement is to use SAP authentication and SSO from the portal to BI4 and not logon on manually.
I have entered an OSS message for this issue and making little progress there. If you have made this work or have some ideas you can share, I would be very grateful!
Lee Lewis

Just want to update with more information-
Again, from the enterprise portal through the ivew - BO Document List template,
Connects through to BI Launch Pad without having to login-using the BW ABAP credentials
Then we try to open a webi document with an olap connection that has sso authentication instead of pre-defined user, we do not get the same user login failed message, the page is just blank
But if I login directly to bi launch pas with the same SAP authentication that was used with the enterprise portal, and bring up the same webi document, the report is displayed as expected.
Anybody successfully use the BO document list ivew using Olap connections with SSO and not just a pre-defined user?
Lee Lewis

Memory Errors with NX4 and Adobe 3D

After installing the Adobe 3d trial version,I've had nothing but problems with NX4.Out of memory errors when there is plenty available.REinstalled NX4,same problems.Uninstalled adobe 3D,and the problem went away.We would like to purchase this,but not until this particular problem is solved.
Win Xp SP2
2 GB Ram
Dell Precision 370
Pentium 4
NX 4.0.0.25

are you working on big 3d models in nx4 ?(to check that, please do a right click on the windows task bar and open the task manager and check the memory used by nx4 with your 3d models loaded)- did the problem also occured with small models ?
if you memory footprint approaches the 2gb barrier, then 3d capture might be the cause ot your memory problems, to get rid of it, just open acrobat3d and go in the menu edit/preferences/3d capture and delete nx4 from your list of capturable applications.

Can't fill ByteArray in EJB-Method with generated Model-Class from WD-Model

Hello everybody,
i try to call an ejb-method with data from an FileUpload-UI-Element in WD. The EJB-Method is receiving the byte-data to create a document in KM via a Web-Service.
The ebj-methid has the following signature:
public FObject putFileDataSimple (byte [] btContent, String fullFileName, String username, String password)
After importing the Model and creating a context node i have the following structure:
Request_X_putFileDataSimple
+---btContent (Node)
      +-- item
+ fullFileName
+ username
+ password
btContent is of the generated Type Byte_Item, which is itself a generated Model-Class of modelClassType ARRAY
item is of Type byte
But i simply have problems to fill the context node (or the binded model-object). i tried different ways and looked at thread [https://www.sdn.sap.com/irj/scn/thread?messageID=1954223] but i cant get it work.
So my Method in WD looks like this to fill the structure and start the ejb-method:
public boolean putKMDataSimple( com.sap.tc.webdynpro.services.sal.datatransport.api.IWDResource fin ) {
try
wdContext.currentRequest_X_putFileDataSimpleElement().setFullFileName("abc");
wdContext.currentRequest_X_putFileDataSimpleElement().setUsername("def");
wdContext.currentRequest_X_putFileDataSimpleElement().setPassword("xxx");
byte[] buffer = new byte[1];
InputStream in = fin.read(false);
int i = 1;
int j = 0;
while (i!=-1)
     i = in.read(buffer);
     if (i!=-1)
       Byte_Item bi = new Byte_Item(mAlf);     // mAlf ist global defined Model-Class-Instance
       bi.setItem(buffer[0]);
        wdContext.currentRequest_X_putFileDataSimpleElement().modelObject().addBtContent(bi);
wdContext.currentRequest_X_putFileDataSimpleElement().modelObject().execute();
Doing this results in Error-Messages like:
Model-Object is not a complex type for every byte added this way.
And finally an IllegalArgumentException at java.lang.reflect.Array.set(Native Method)
The second way i tried is:
public boolean putKMDataSimple( com.sap.tc.webdynpro.services.sal.datatransport.api.IWDResource fin ) {
try
wdContext.currentRequest_X_putFileDataSimpleElement().setFullFileName("abc");
wdContext.currentRequest_X_putFileDataSimpleElement().setUsername("def");
wdContext.currentRequest_X_putFileDataSimpleElement().setPassword("xxx");
byte[] buffer = new byte[1];
ArrayList<Byte> btlist = new ArrayList<Byte>();
InputStream in = fin.read(false);
int i = 1;
int j = 0;
while (i!=-1)
     i = in.read(buffer);
     if (i!=-1)
          btList.add(buffer[0]);
wdContext.currentRequest_X_putFileDataSimpleElement().modelObject().setBtContent(btList);
wdContext.currentRequest_X_putFileDataSimpleElement().modelObject().execute();
Trying so results in:
java.lang.ClassCastException: class java.lang.Byte:null incompatible with interface com.sap.tc.cmi.model.ICMIModelClass:library:com.sap.tc.cmi(at-sign)[email protected]@alive
whenn calling the setBtContent Method
I don't what to do now to fill the context/model-object the right way.
Any helpfull hints are very welcome
Edited by: Matthias Hayk on Dec 1, 2008 5:51 PM
Edited by: Matthias Hayk on Dec 2, 2008 10:56 AM

Ok Vesselin and thanx for your idea,
so i adapted the source in the way you told like the following:
                 ArrayList<Byte_Item> btlist = new ArrayList<Byte_Item>();
                 byte[] buffer = new byte[1];
                 InputStream in = fin.read(false);
                 int i = 1;
                 int j = 0;
                 while (i!=-1)
                      i = in.read(buffer);
                      if (i!=-1)
                           // Byte gelesen
                           Byte_Item bi = new Byte_Item(mAlf);
                           bi.setItem(buffer[0]);
                           btlist.add(bi);
                           j++;
                 wdContext.currentRequest_X_putFileDataSimpleElement().modelObject().setBtContent(btlist);
                 wdContext.currentRequest_X_putFileDataSimpleElement().modelObject().execute();
This results also in the following Exception when exceuting the WS-proxy:
execute
[EXCEPTION]
java.lang.IllegalArgumentException
at java.lang.reflect.Array.set(Native Method)
at com.sap.tc.webdynpro.model.ejb.model.EJBGenericModelClassExecutable.getInputParameters(EJBGenericModelClassExecutable.java:215)
at com.sap.tc.webdynpro.model.ejb.model.EJBGenericModelClassExecutable.execute(EJBGenericModelClassExecutable.java:112)

Problem with distribution model receiver ports

Hi,
I am facing a problem with distribution model.
I am using Distribution model for material classification data. I am sending my classification data using CLFMAS message type to one of the receiver. Again another person also sending classification data to another receiver.
But both objects will run at different times.
Problem is for every run and every change it is creating 2 idocs instead of 1 idoc.
I am able to create an IDOC with my changes for classifications. But it is creating 2 idocu2019s instead of creating 1 idoc. Because of there is another distribution model with same message type with different receiver port has been configured. I.e. reason it is creating 2 idocu2019s and sending to both the revivers.
When I run my changes It needs to create 1 idoc and send to my receiver port. If another person run his job it needs to create another idoc.
So how will I filter distribution model based on receiver port? it needs to create only 1 IDOC ..

Hi kotesh,
A similar issue.
check if this will help.
Do the following:
Go to TOOLS>ALE Development>IDoc Type Development> WE81 and create a new message type and give it a different name - say ORDERS2. Use WE82 to link it to an IDoc Type - say ORDERS05. So now you will have two message types linked to the same IDoc type. Each message type can now be referred in different logical systems without any clashes.
Now you can use BD64 to build your model using message types ORDERS and ORDERS2 without getting the multiple recepient error message.
Then use WE20 to set up each partner profile using your defined output conditions in message control to trigger the creation of the IDoc. Now you will beable to send the same Idoc type to different recepients.
source:http://sap.ittoolbox.com/groups/technical-functional/sap-interfaces/sap-distribution-model-3008763
Regards,
SuryaD.

Error with SI model residual Analysis.vi

Similar Messages

Maybe you are looking for