Error: "X11 connection rejected because of wrong authentication"

I am not sure this is the correct forum to post this
question, if it is not, I'd appreciate it if someone would
tell me a more appropriate place.
I have an occasional problem when I use either ssh -X or ssh -Y
to a Oracle (nee Sun) Solaris host. I can run most
X11 programs but when I run one particular program, the
program will display this error message and fail:
X11 connection rejected because of wrong authentication.
The program which occasionally fails is the Symantec Netbackup
Server Administrator interface: jnbSA. Like I said other X11
programs run fine (xeyes, xbiff, xclock, etc.) It's just this
one application which fails intermittently. When it fails
it will display these messages:
DISPLAY environment variable is set to: p2:10.0
Console was started on:
SunOS p2 5.10 Generic_142900-15 sun4u sparc SUNW,Sun-Fire-V250
Command line options were:
/opt/openv/netbackup/bin/jnbSA
Starting administration console version 6.5.
LANG=iso88591
LC_CTYPE="C"
LC_NUMERIC="C"
LC_TIME="C"
LC_COLLATE="C"
LC_MONETARY="C"
LC_MESSAGES="C"
LCALL=iso_88591
java version "1.5.0_17"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_17-b04)
Java HotSpot(TM) Server VM (build 1.5.0_17-b04, mixed mode)
Warning: Cannot convert string "-monotype-arial-regular-r-normal---140-*-*-p--iso8859-1" to type FontStruct
X connection to p2:10.0 host broken (explicit kill or server shutdown)
Like I said, I can start, say xclock, immediately after
the above termination, and it would run fine.
It is maddening because jnbSA works sometimes, and
fails with the above errors at other times.
I have tried to follow this on the X11 forums, but
most suggest making a change to /etc/sshd_config and
while I tried changing that, it still does not correct
this problem.
Suggestions?

I'm confused why you posted on the Tarantella/SGD Forum then?
Yes, you can use SGD to have your Mac client display back a Solaris/Linux/Windows/Mainframe, etc application remotely.
http://www.oracle.com/us/technologies/virtualization/oraclevm/061996.html

Similar Messages

Error message: X11 connection rejected because of wrong authentication

Until recently I was able to ssh from the Mac in my office -- runing
MacOS 10.6.4, to a Sun Solaris server -- running Solaris 10 10/09
(update 8) and all available patches installed, and run X11 programs
displaying on my Mac.
I installed these patches recently:
142900-15 SunOS 5.10: kernel patch
124867-15 Sun Studio 12: Patch for C 5.9 compiler
122212-42 GNOME 2.6.0: GNOME Desktop Patch
138764-02 SunOS 5.10: acc driver patch
120199-16 SunOS 5.10: sysidtool Patch
119252-29 SunOS 5.10: System Administration Applications Patch
124630-44 SunOS 5.10: System Administration Applications, Network, and Core Libraries Patch
124628-10 SunOS 5.10: CD-ROM Install Boot Image Patch
118777-17 SunOS 5.10: Sun GigaSwift Ethernet 1.0 driver patch
121118-17 SunOS 5.10: Update Connection System Client 1.0.17
144759-02 SunOS 5.10: mount patch
145019-01 SunOS 5.10: ifconfig patch
119313-38 SunOS 5.10: WBEM Patch
124393-10 CDE 1.6: Dtlogin smf patch
119278-37 CDE 1.6: dtlogin patch
121734-13 SunOS 5.10: patch to support addition of new UTF-8 locales
119254-75 SunOS 5.10: Install and Patch Utilities Patch
118666-27 JavaSE 5.0: update 25 patch (equivalent to JDK 5.0u25)
118667-27 JavaSE 5.0: update 25 patch (equivalent to JDK 5.0u25), 64bit
121430-53 SunOS 5.8 5.9 5.10: Live Upgrade Patch
119246-38 SunOS 5.10: Manual Page updates for Solaris 10
121308-22 SunOS 5.10: Solaris Management Console Patch
119315-21 SunOS 5.10: Solaris Management Applications Patch
118712-24 SunOS 5.10: Sun XVR-100 Graphics Accelerator Patch
144325-02 SunOS 5.10: Resource Management User Interface Patch
145074-01 SunOS 5.10: Trusted JDS Help rebranding patch
124457-03 X11 6.6.2: xdm patch
and now when I try to run certain programs, namely Symantec NetBackup
Server (NBS) administrator interface, jnbSA, when I run the program I see:
X11 connection rejected because of wrong authentication.
and jnbSA fails. I removed these patches:
118666-27 JavaSE 5.0: update 25 patch (equivalent to JDK 5.0u25)
118667-27 JavaSE 5.0: update 25 patch (equivalent to JDK 5.0u25), 64bit
124457-03 X11 6.6.2: xdm patch
with no change. I have made NO updates to NBS, and what's
even more weird, regular X11 programs such as x{eyes,biff,emacs}
work fine.
I've tried tinkering with the contents of ~/sshconfig and /etc/ssh_config
to no avail.
Is anyone else seeing this problem?
Any suggestions?
Thanks!

I'm confused why you posted on the Tarantella/SGD Forum then?
Yes, you can use SGD to have your Mac client display back a Solaris/Linux/Windows/Mainframe, etc application remotely.
http://www.oracle.com/us/technologies/virtualization/oraclevm/061996.html

X11 connection rejected because of wrong authentication- Opera not starting

Hi,
I tried X11 forwarding on a remote machine by giving the command
ssh -X user@remote-host-name
And I successfully logged into that remote machine and X11 is working properly. Even I started mozilla, firefox etc - working properly.
But, when I tried to start opera, I got the below error message.
-bash-3.00# opera
opera: $HOME set to /root. Use -personaldir if you do not want to use /root/.opera/
X11 connection rejected because of wrong authentication.
opera: Fatal IO error: client killed
I appreciate your efforts and guidelines.
Thanks & Regards,
Paras.

I have no idea but the Opera support Forums are usually active and competent.
alan

X11 connection rejected because of wrong authentication

Hi all:
I've started xdmcp service in my desktop machine
and i keep getting this msg yet i don't know where it comes from
since i have no trouble logging into my machine
i suppose it's someone else
where can i find the ip or other information on this ?
thanks

/var/log/auth.log maybe?

Win8 pro, hyper-v: error while connecting on local machine "an authentication error has occurred" "the supplied handle is invalid"

Subject host OS: windows 8 pro.
I've turned os feater hyper-v on, restarted copmuter. In hyper-v manager added empty virtual machine. After double clikcing on my newly created machine windows with "virtual michine connection appeered". I turned button "power on" and
console has dropped error:
"remote desktop connection": "An authentication error has occurred. The supplied handle is invalid."
on the tiny image on the left bottom picture a can see quest console.
1) How can i install OS on my guest, where is default console for virtual machine?
2) What is RDP required
for on this firts stage of installation and how can i connect to the virtual machine console without it???

Hi,
Regarding your first question, here is an article talking about install and configure the first virtual machine in Hyper-V, please refer to Step 2: Create a virtual machine and Step 3: Install the guest operating system in the below link:
Install Hyper-V and Configure a Virtual Machine
By saying the default console for Virtual machine, do you mean the Hyper-V manager?
The error might indicate that there is no VM available to connect. After we installed a OS, then we could connect it with the right-click in Hyper-V manager， see:
Connect to a Virtual Machine
The RDP connections is used to connect the VM in Windows 8, and for Windows 8.1, there are great improvements including what's called Enhanced Session Mode, more information, please see:
Overview: Client Hyper-V Enhanced Session Mode in Windows 8.1
If I misunderstand something, please let me know.
Best regards
Michael Shao
TechNet Community Support

Connection rejected by server

Hi Everyone,
i have installed FSM2 and IISwin2003 and Flash8 on the same
server,
my rtmp is : rtmp://127.0.0.1/myapp2/myapp2.flv
it works fine on local, but when a clinet tries to browse it
over same LAN , the client gets the error below :
Connection rejected by server. Reason : [ Server.Reject ] :
(_defaultRoot_, _defaultVHost_) :
Application (myapp2) is not defined.
what im doing wrong ? pls help..

It because you're using the localhost IP, where you should be
using your LAN IP.

Authentication error while connecting to application server IntegratedWebL

When I start the IntegrationWeblogicServer in JDeveloper11.1.1.3.0, the server can be started, the IntegratedWeblogicServer cann't be connected because of the authentication error.
The integrated weblogic server can be started successfully outside the Jdevelper, and I never changed the password of user weblogic.
<2010-8-24 下午02时55分17秒 CST> <Warning> <Server> <BEA-002611> <Hostname "ppan-cn.cn.oracle.com", maps to multiple IP addresses: 10.182.254.102, 192.168.174.1, 192.168.65.1>
<2010-8-24 下午02时55分17秒 CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<2010-8-24 下午02时55分17秒 CST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
User: weblogic, failed to be authenticated.
**** Authentication error while connecting to application server IntegratedWebLogicServer. Please check settings.
**** Failed to complete start-up of application server IntegratedWebLogicServer.
[Server Instance IntegratedWebLogicServer is shutting down. All applications currently running will be terminated and undeployed.]
[Forcing termination of IntegratedWebLogicServer]
taskkill /F /PID 748
Process exited.
What's wrong with the JDeveloper11.1.1.3.0? And How to fix it? Any help is appreciated in advance.
_Paula

Hi Paula:
You may want to check if one of your applications has its own users and groups settings. If you define your own Application's users ang groups settings, you may need to uncheck the setting in JDeveloper ADF Security wizard to avoid overwriting the embedded WLS security settings. Otherwise, even you reset your embedded WLS or recreate it, its settings will be overwritten again once you run your application on it.
The way to reset or recreate your embedded WLS is to follow Frank's tips.
Good luck,
Alex

Android MS RDP - RPC Error: Your connection was denied because of a Resource Access Policy (TS_RAP). Please contact your server administrator. (2147965402).

I love iTap Mobile. Paid for the app. Sorry to see them discontinue it, but now I know why. Microsoft bought them out! But even though free, I am getting an error: RPC Error: Your connection was denied because of a Resource Access
Policy (TS_RAP). Please contact your server administrator. (2147965402). I worked with iTap to fix this so I guess they sold Microsoft their older buggy code... Microsoft, please fix!
PS: This is the Android version. Mac and iOS are both okay.
EDIT: After an update a few months ago, iOS is no longer working. Not sure if the problem is related to the Android MSRDP issue.
UPDATE - Relevant posts (need Android RDP software engineer to fix):
Event Viewer Log when using Android client:
The user
"DOMAIN\testuser", on client computer "10.x.x.x", met connection authorization policy requirements and was therefore authorized to access the RD Gateway server. The following authentication method was used: "NTLM". (This
is most likely for logging into RD Web - icons shows up).
The
user "DOMAIN\testuser", on client computer "10.x.x.x", did not meet resource authorization policy requirements and was therefore not authorized to resource"localhost".
The following error occurred: "23002". (This is after clicking on any
of the icons).
I
think the Android MS RDP client is providing the incorrect resource. It shouldn't be "localhost".
It should be the RD Connection Broker's hostname, I believe.
Here's what it should look like (connected using a Windows PC going
through the RD Web portal via Internet Explorer):
The user "DOMAIN\testuser", on client computer "10.x.x.x", met connection
authorization policy requirements and was therefore authorized to access the RD Gateway server. The following authentication method was used: "NTLM".
The user "DOMAIN\testuser", on client computer "10.x.x.x", met resource
authorization policy requirements and was therefore authorized to connect to resource "rdsfarm.domain.com".
The user "DOMAIN\testuser", on client computer "10.x.x.x", connected
to resource "rdsfarm.domain.com".
Stephan,
Do you have any way to contact the software engineer who worked on the Android version of the RDP client? Please
have them read this thread. They need to fix the hard coded "localhost" resource to be a variable (namely whatever the user put in for the server).
This is why the MS RDP app is failing in situations where the FQDN for the RD Gateway and Connection Broker uses
the same host name.
Again, this is not a configuration problem on our end as it works as intended with the native Windows RDP client
as well as the Mac and iOS version of the mobile RDP client (all based on iTap Mobile's RDP app).
This is a problem specific to the Android RDP app.
PS: No matter how hard I try, the WYSIWYG editor is not very WYSIWYG at all, and so everything here looks messed up even though it looked right when I posted it (it is deleting new blank lines I'm inserting to make it spaced out and easier to read). See
below to read the post in context.

Thanks for the bumps, everyone. I haven't check this thread in a while because I basically gave up on Microsoft's ability to respond. Unlike paid apps, there's no number to call or ticket to open when an app like this malfunctions.
Just to give you an update, iOS users started having issues connecting a few months ago. I don't remember what version started this. I'm not sure if it's the same problem.
Also, the newest version now gives a slightly different error message: RpcOverHttpEndpointException: 2, Your connection was denied because of a Resource Access Policy (TS_RAP). Please contact your server administrator.
For Android users, I am starting to recommend Xtralogic Remote Desktop Client. It's a paid app, but it works great. I don't know of any alternative for iOS.
MSRDP for Mac OSX (was also an iTap application) continues to work throughout the many updates.
We need a software engineer from MS to read my first post. All the information that will point to a fix is there. I strongly believe someone hardcoded the string "localhost" instead of using a variable to point to the FQDN of the rdsfarm
name.
Here's that info again (copied/pasted). It doesn't take an engineer to understand the issue. If you know how to decipher Event Logs, you can see where the problem is.
Event
Viewer Log when using Android client:
The
user "DOMAIN\testuser", on client computer "10.x.x.x", met connection authorization policy requirements and was therefore authorized to access the RD Gateway server. The following authentication method was used: "NTLM". (This
is most likely for logging into RD Web - icons shows up).
The
user "DOMAIN\testuser", on client computer "10.x.x.x", did not meet resource authorization policy requirements and was therefore not authorized to resource"localhost".
The following error occurred: "23002". (This
is after clicking on any of the icons).
I
think the Android MS RDP client is providing the incorrect resource. It shouldn't be "localhost".
It should be the RD Connection Broker's hostname, I believe.
Here's
what it should look like (connected using a Windows PC going through the RD Web portal via Internet Explorer):
The user "DOMAIN\testuser", on client computer "10.x.x.x",
met connection authorization policy requirements and was therefore authorized to access the RD Gateway server. The following authentication method was used: "NTLM".
The user "DOMAIN\testuser", on client computer "10.x.x.x",
met resource authorization policy requirements and was therefore authorized to connect to resource "rdsfarm.domain.com".
The user "DOMAIN\testuser", on client computer "10.x.x.x",
connected to resource "rdsfarm.domain.com".

I can't seem to connect to my lion vpn, all web services I set up work well like wikis and what not. I get a security error 792 Connection attempt failed because security negotiation times out. Please help

I get error 792 Connection attempt failed because security negotiation time out. I am trying to connect a xp machine to my vpn.

I get error 792 Connection attempt failed because security negotiation time out. I am trying to connect a xp machine to my vpn.

I downloaded Lion and have attempted to 'updat' it from apps to my imac... after 3 hours of uploading it show mw an error message saying there's something wrong with my internet connection... which there is not. Anyone else experience this?

I downloaded Lion and have attempted to 'update' it from apps to my imac... after 3 hours of uploading it show me an error message saying there's something wrong with my internet connection... which there is not. Anyone else experience this?

What type of Internet connection do you have? How fast is it?

X11 ERROR: Xlib: connection to ":0.0" refused by server

Hi all,
I've problem with X11 on os x 10.6.2.
Every time I move my macbook pro from office to home (and viceversa)
X11 needs to be quit and restarted otherwise I get the following
error:
Xlib: connection to ".0" refused by server
and X11 won't launch windows. Now this error is certainly linked
to the fact that the computer changes IP address.
What's the best way to solve the problem ?
below you find the first lines of my .xinitrc
thanks
marco
14:49> cat ~/.xinitrc
#!/bin/sh
# $Id: xinitrc,v 1.2 2003/02/27 19:03:30 jharper Exp $
userresources=$HOME/.Xresources
usermodmap=$HOME/.Xmodmap
sysresources=/etc/X11/xinit/.Xresources
sysmodmap=/etc/X11/xinit/.Xmodmap
# merge in defaults and keymaps

Are you setting DISPLAY somewhere? You should not be. The system sets DISPLAY, and X11 will not work if you change the system-set value.

CS6 64bit "the operation connect complete because of an unknown error." [cant]

When I run AI 16.2 x64bit as a normal user and try to create a new document I get the following error message:
"the operation connect complete because of an unknown error." [cant]
However, if I run as administrator i have no issues... what is the problem?

it's actually my user account which has administrator level access rights to the system

Unable to connect wifi via netctl - Unregistered Authentication Agent

I have a previous post int the Newbie Corner that went unanswered, so I figured I'd try again here now that I have some new information. The post is here...
https://bbs.archlinux.org/viewtopic.php?id=197031
And here's a copy of that post so you don't have to open it in a new tab.
ORIGINAL POST:
I have continually been having issues with netctl failing to start an automatic profile for awhile now, but I have been able to manually bring up my connection once my system is up and running. Today I am running into the issue where netctl will outright fail to connect during a manual attempt. When viewing journalctl -xe the error I receive is:
WPA association/authentication failed for interface 'wlan0'
Failed to bring the network up for profile
I noticed that there is a 'fix' for this issue on the Arch Wiki which simply states to bring wlan0 down with ip link, then to start the profile with netctl again. I went ahead and gave that fix a try and got a new error.
Unregistered Authentication Agent for unix-process:1324:44567
The error goes on to provide a path to .../PolicyKit1/AuthenticationAgent,.
I have tried using NetworkManager as well, but I'd prefer not to use it as I seem to have more problems with it over netctl, and that is why I currently have it disabled. Any advice on how to proceed would be appreciated. Also, I was connected to my home wifi last night without a problem, and I have tested the wifi connection with my phone, which authenticates and connects without a problem.
EDIT:
I did a bit more digging and found some startup errors issues via dmesg with wlan0.
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 00:24:b2:71:b8:27
wlan0: direct probe to 00:24:b2:71:b8:27 (try 1/3)
wlan0: direct probe to 00:24:b2:71:b8:27 (try 2/3)
wlan0: direct probe to 00:24:b2:71:b8:27 (try 3/3)
wlan0: authentication with 00:24:b2:71:b8:27 timed out
The last 5 lines of this error repeats about 7 times before stopping. I use a broadcom card and my 43xx driver loads without a problem, I've been using it for awhile now on various distros.
b43-phy0: Broadcom 4311 WLAN found (core revision 10)
EDIT:
Well after doing some research, I found this existing bug.
https://bugs.archlinux.org/task/44821
Involving wifi not working under kernel 4.0.1. I noticed a Broadcom card listed by one of the users who was having the same problem, so at this point I'm probably going to wait until I get home to test my laptop on my home wifi again, then if I run into problems I'll downgrade my kernel and see how things go.
NEW POST:
So after all of that I tried my laptop at home again, and netctl-auto connected flawlessly to my wifi at home, which has led me to believe that the problem has to do with the message...
polkitd[1087]: Unregistered Authentication Agent for unix-process:2582:96758
I had previously noted that I would downgrade my kernel, but at this point I'd hate to do that considering netctl-auto is working.
I have also tried connecting via wifi-menu, and when I try that I get the message
Interface 'wlan0' is controlled by netctl-auto
After which authentication fails. I have stopped netctl-auto via systemctl using systemctl stop [email protected] and tried again. I end up receiving the message error message from systemctl that the job failed, and viewing journalctl -xe shows the recurring Unregistered Authentication Agent from polkitd.
Any help would be appreciated.
EDIT:
The issue continues. I have enabled the netctl profile I am currently working in netctl-auto with netctl enable profile, and that has not allowed the profile to automatically start up as it would with my home wireless connection. Something I have been noticing is that upon boot, without attempting to connect with netctl, is that wlan0 is not up.
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
I have manually brought it up and immediately receive a failed message from systemd regarding my profile in netctl. If I do not manually bring it up with ip link set dev wlan0 up, then when I try to connect with netctl start profile, netctl will not bring wlan0 up and it will leave it in it's previous state.
The odd thing is, even with wlan0 in a down state, systemd is giving me the error message...
WPA association/authentication failed for interface 'wlan0'
Which is odd because netctl shouldn't be able to pass authentication is wlan0 is still down.
I've been at this for 2 days now and am no closer to fixing this than I was yesterday. I could really use some assistance. At this point I believe I may just downgrade my kernel and hope this fixes the issue, if not then I'm silently hoping my laptop won't connect to my home wifi when I get home so I can diagnose this problem via ethernet.
EDIT:
Well here's something new. When viewing why netctl-auto fails on startup via systemctl status [email protected] I am getting the reason of
Could not create the configuration file for interface wlan0
At least now I have a bit more to work with.
Last edited by barefly (2015-05-06 22:30:39)

Use this article: iOS: Wi-Fi settings grayed out or dim - Support - Apple
Follow all of the troubleshooting steps. You can even try restoring the device as new: iOS: How to back up your data and set up your device as a new device
If the wi-fi remains greyed out, your device needs service.
If within warranty, it should be free.
If not, it will probably cost $199 USD + tax.

Message "Error in connection:No result set, result attempts = 100" on VC

Hi,
I am using a JDBC datasource to retrieve, update, insert and delete information from a SQL Server database using executing store procedures from VC.
The selection of the data is perfect but for the deletion, insert or update of any data using store procedures I always get the following message:
"Error in connection:No result set, result attempts = 100"
At the end the information is modified in the database but I get error.
Here is an example of one of my store procedure:
CREATE PROCEDURE [dbo].[DelData]
     @id uniqueidentifier
     -- Add the parameters for the stored procedure here
AS
BEGIN
     -- SET NOCOUNT ON added to prevent extra result sets from
     -- interfering with SELECT statements.
     SET NOCOUNT ON;
    -- Insert statements for procedure here
     delete from data
       WHERE Rowid=@id;
END
Let me know if somebody knows the reason of this and if there is something that I am doing wrong.
Thanks,
Zareh

Hi,
when you SELECT data, you get a result. So your connection gets a result set. When you DELETE, INSERT,... you have no result, because you didn't select data. So your connection can't get any result sets.
best regards,
Christian

Error while Connecting report Best Practices v1.31 with SAP

Hello experts,
I'm facing an issue while trying to connect some of my reports from Best Practices for BI with SAP.
It only happens when it's about info sets, the other ones that are with SAP tables go smoothly without a problem.
The most interesting is I have already one of the reports connected to SAP info sets.
I have already verified the document of steps of creation of additional database that comes with BP pack. They seem ok.
Here goes what Crystal Reports throws to me after changing the data source to SAP:
For report "GL Statement" one of the Financial Analysis one which uses InfoSet: /KYK/IS_FIGL_I3:
- Failed to retrieve data from the database; - click ok then...
- Database connector error: It wasn't indicated any variant for exercise (something like this after translating) - click ok then
- Database connector error: RFC_INVALID_HANDLE
For report "Cost Analysis: Planned vs. Actual Order Costs" one of the Financial Analysis one which uses InfoSet: ZBPBI131_INFO_ODVR and ZBPBI131_INFO_COAS; and also the Query CO_OM_OP_20_Q1:
- Failed to retrieve data from the database; - click ok then...
- Database connector error: check class for selections raised errors - click ok then
- Database connector error: RFC_INVALID_HANDLE
Obs.: Those "Z" infosets are already created in SAP environment.
The one that works fine is one of the Purchasing Analysis reports:
- Purchasing Group Analysis -> InfoSet: /KYK/IS_MCE1
I'm kind of lost to solve this, because I'm not sure if it can be in the SAP JCO or some parameter that was done wrongly in SAP and I have already check possible solutions for both.
Thanks in advance,
Carlos Henrique Matos da Silva - SAP BusinessObjects BI - Brazil.

I re-checked step 3.2.3 - Uploading Crystal User Roles (transaction PFCG) - of the manual where it talks about CRYSTAL_ENTITLEMENT and CRYSTAL_DESIGNER roles, I noticed in the Authorizations tab that the status was saying it hadn't been generated and I had a yellow sign, so then that was what I did (I generated) as it says in the manual.
Both statuses are now saying "Authorization profile is generated" and the sign is now green on the tab.
I had another issue in the User tab (it was yellow as Authorizations one before generating)....all I needed to do to change to green was comparing user (User Comparison button).
After all that, I tried once more to refresh the Crystal report and I still have the error messages being thrown.
There's one more issue in one of the tabs of PFCG transaction, it is on the Menu one where it is with a red sign, but there's nothing talking about it in the manual. I just have a folder called "Role menu" without anything in it.
Can it be the reason why I'm facing errors when connecting the report to SAP infoSets? (remember one of my reports which is connected to an infoSet works good)
Thanks in advance,
Carlos Henrique Matos da Silva - SAP BusinessObjects BI - Brazil.

Error: "X11 connection rejected because of wrong authentication"

Similar Messages

Maybe you are looking for