Errorcode 6 compiling

When I try to compile my Labview FPGA I get the error: Xflow - Program xst returned error code 6. Aborting flow execution...
I have checked all my inputs and they're all connected properly so that shouldn't be the problem. I never had any problems like this before while compiling.
It is a very simple program that's suppost to write a desired signal to the FPGA memory and read it again changing samplefrequency and amplitude.
I enclosed my file so you might find my mistake.
Thanks for helping
Attachments:
FPGA_blok.vi ‏257 KB

Hi,
The following KBs are related to this issue:
http://digital.ni.com/public.nsf/websearch/D0181D05C79F763D86256F8500732563?OpenDocument
You didn't include the subVI but maybe this is the problem:
http://digital.ni.com/public.nsf/websearch/FE379EAFF553982286256D740076B9C5?OpenDocument
I've noticed that there is one unconnected terminal.
Otherwise I cannot see any unbounded arrays or other problem causes.
Add more detail to your post the next time. Stuff like LabVIEW, FPGA, and RIO versions.
Regards.
Joris V

Similar Messages

Compile 9076 with LabVIEW 2014 Worked good with 2012 SP1

An internal software error has occurred. Please contact National Instruments technical support at ni.com/support with the following information:
Error 7 occurred at Open VI Reference in nirviOpenVIRefByNameOrPath.vi->niFpgaRemapObjsAndListIfUnderXNode.vi->niFpgaRemapObjsHandleXNodeSubErrors.vi->nirviMassageErrorList.vi->niFpgaErrorDialog_ParseErrors.vi->niFpgaErrorDialog_ReadErrorData.vi->niFpgaGenerateCode_ErrorDialog.vi
Possible reason(s):
LabVIEW: File not found. The file might be in a different location or deleted. Use the command prompt or the file explorer to verify that the path is correct.
VI Path: C:\Program Files\National Instruments\LabVIEW 2014\rvi\CodeGenErrorUtilities\Diagram Constant
All text parsed:
<CodegenErrorList>
          <CodeGenErr>
            <ErrorCode>-64001</ErrorCode>
            <DynamicText>
              <TreeLineInfo>
                <TreeInfo>
                  <TreeID>1</TreeID>
                </TreeInfo>
              </TreeLineInfo>
            </DynamicText>
          </CodeGenErr>
          <CodeGenErr>
            <ErrorCode>-64001</ErrorCode>
            <DynamicText>
              <TreeLineInfo>
                <TreeInfo>
                  <TreeID>1</TreeID>
                </TreeInfo>
              </TreeLineInfo>
            </DynamicText>
          </CodeGenErr>
          <CodeGenErr>

Hi Nieman,
You have the right compilers for your FPGA targets, based on KB 609GUVBT.
Error -64001 indicates that there is an issue with one of the nodes in your VI. Since you are able to compile a blank FPGA VI, then you should try to identify the node that is causing this problem. When trying to pinpoint this node, I’d recommend executing your FPGA VI with simulated I/O on the development machine, as described in KB 3W6EFRLX,
Also, are you able to reproduce this issue when running one of the LabVIEW Example Finder FPGA VIs that targets your NI 9076? You can find these examples in the Example Finder's Hardware Input and Output>>CompactRIO section.
Regards,
Tunde S.
Applications Engineer
National Instruments

JDev 1013 Error: Internal compilation error, terminated with a fatal except

I've a class I compiled used in JDev 10.1.2.1.
Now I try to compile it with JDev 10.1.3 but I get an error :
Error: Internal compilation error, terminated with a fatal exception
What does it means ?
How can I solve it ?
I tried to use both 5.0 and 1.4.2 compilers but the result is the same.
Tks
Tullio
Here the class
/* The following code was generated by JFlex 1.2.2 on 05/10/04 17.46 */
* Copyright (C) 1998,99 Gerwin Klein <[email protected]>. *
* All rights reserved. *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License. See the file *
* COPYRIGHT for more information. *
* This program is distributed in the hope that it will be useful, *
* but WITHOUT ANY WARRANTY; without even the implied warranty of *
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
* GNU General Public License for more details. *
* You should have received a copy of the GNU General Public License along *
* with this program; if not, write to the Free Software Foundation, Inc., *
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA *
package axioma.a4j.parser;
import java_cup.runtime.*;
* This class is a scanner generated by
* JFlex 1.2.2
* on 05/10/04 17.46 from the specification file
* <tt>file:/C:/A4j/A4j/Common/Parser/grammatiche/Scanner.flex</tt>
public class AxScanner implements java_cup.runtime.Scanner {
/** this character denotes the end of file */
final public static int YYEOF = -1;
/** lexical states */
final public static int STRING = 1;
final public static int YYINITIAL = 0;
final public static int CHARLITERAL = 2;
* Translates characters to character classes
final private static String yycmap_packed =
"\11\10\1\3\1\2\1\0\1\3\1\1\16\10\4\0\1\3\1\50"+
"\1\16\1\0\1\7\1\0\1\44\1\15\1\31\1\32\1\5\1\41"+
"\1\40\1\42\1\14\1\4\1\12\11\13\1\0\1\37\1\47\1\46"+
"\1\45\2\0\32\11\1\35\1\17\1\36\1\0\1\11\1\0\1\25"+
"\1\51\2\11\1\23\1\24\5\11\1\26\1\6\1\30\3\11\1\21"+
"\1\27\1\20\1\22\5\11\1\33\1\43\1\34\1\0\41\10\2\0"+
"\4\11\4\0\1\11\12\0\1\11\4\0\1\11\5\0\27\11\1\0"+
"\37\11\1\0\u0128\11\2\0\22\11\34\0\136\11\2\0\11\11\2\0"+
"\7\11\16\0\2\11\16\0\5\11\11\0\1\11\21\0\117\10\21\0"+
"\3\10\27\0\1\11\13\0\1\11\1\0\3\11\1\0\1\11\1\0"+
"\24\11\1\0\54\11\1\0\10\11\2\0\32\11\14\0\202\11\1\0"+
"\4\10\5\0\71\11\2\0\2\11\2\0\2\11\3\0\46\11\2\0"+
"\2\11\67\0\46\11\2\0\1\11\7\0\47\11\11\0\21\10\1\0"+
"\27\10\1\0\3\10\1\0\1\10\1\0\2\10\1\0\1\10\13\0"+
"\33\11\5\0\3\11\56\0\32\11\5\0\13\11\13\10\12\0\12\10"+
"\6\0\1\10\143\11\1\0\1\11\7\10\2\0\6\10\2\11\2\10"+
"\1\0\4\10\2\0\12\10\3\11\22\0\1\10\1\11\1\10\33\11"+
"\3\0\33\10\65\0\46\11\13\10\u0150\0\3\10\1\0\65\11\2\0"+
"\1\10\1\11\20\10\2\0\1\11\4\10\3\0\12\11\2\10\2\0"+
"\12\10\21\0\3\10\1\0\10\11\2\0\2\11\2\0\26\11\1\0"+
"\7\11\1\0\1\11\3\0\4\11\2\0\1\10\1\0\7\10\2\0"+
"\2\10\2\0\3\10\11\0\1\10\4\0\2\11\1\0\3\11\2\10"+
"\2\0\12\10\4\11\16\0\1\10\2\0\6\11\4\0\2\11\2\0"+
"\26\11\1\0\7\11\1\0\2\11\1\0\2\11\1\0\2\11\2\0"+
"\1\10\1\0\5\10\4\0\2\10\2\0\3\10\13\0\4\11\1\0"+
"\1\11\7\0\14\10\3\11\14\0\3\10\1\0\7\11\1\0\1\11"+
"\1\0\3\11\1\0\26\11\1\0\7\11\1\0\2\11\1\0\5\11"+
"\2\0\1\10\1\11\10\10\1\0\3\10\1\0\3\10\2\0\1\11"+
"\17\0\1\11\5\0\12\10\21\0\3\10\1\0\10\11\2\0\2\11"+
"\2\0\26\11\1\0\7\11\1\0\2\11\2\0\4\11\2\0\1\10"+
"\1\11\6\10\3\0\2\10\2\0\3\10\10\0\2\10\4\0\2\11"+
"\1\0\3\11\4\0\12\10\22\0\2\10\1\0\6\11\3\0\3\11"+
"\1\0\4\11\3\0\2\11\1\0\1\11\1\0\2\11\3\0\2\11"+
"\3\0\3\11\3\0\10\11\1\0\3\11\4\0\5\10\3\0\3\10"+
"\1\0\4\10\11\0\1\10\17\0\11\10\21\0\3\10\1\0\10\11"+
"\1\0\3\11\1\0\27\11\1\0\12\11\1\0\5\11\4\0\7\10"+
"\1\0\3\10\1\0\4\10\7\0\2\10\11\0\2\11\4\0\12\10"+
"\22\0\2\10\1\0\10\11\1\0\3\11\1\0\27\11\1\0\12\11"+
"\1\0\5\11\4\0\7\10\1\0\3\10\1\0\4\10\7\0\2\10"+
"\7\0\1\11\1\0\2\11\4\0\12\10\22\0\2\10\1\0\10\11"+
"\1\0\3\11\1\0\27\11\1\0\20\11\4\0\6\10\2\0\3\10"+
"\1\0\4\10\11\0\1\10\10\0\2\11\4\0\12\10\22\0\2\10"+
"\1\0\22\11\3\0\30\11\1\0\11\11\1\0\1\11\2\0\7\11"+
"\3\0\1\10\4\0\6\10\1\0\1\10\1\0\10\10\22\0\2\10"+
"\15\0\60\11\1\10\2\11\7\10\4\0\10\11\10\10\1\0\12\10"+
"\47\0\2\11\1\0\1\11\2\0\2\11\1\0\1\11\2\0\1\11"+
"\6\0\4\11\1\0\7\11\1\0\3\11\1\0\1\11\1\0\1\11"+
"\2\0\2\11\1\0\4\11\1\10\2\11\6\10\1\0\2\10\1\11"+
"\2\0\5\11\1\0\1\11\1\0\6\10\2\0\12\10\2\0\2\11"+
"\42\0\1\11\27\0\2\10\6\0\12\10\13\0\1\10\1\0\1\10"+
"\1\0\1\10\4\0\2\10\10\11\1\0\42\11\6\0\24\10\1\0"+
"\2\10\4\11\4\0\10\10\1\0\44\10\11\0\1\10\71\0\42\11"+
"\1\0\5\11\1\0\2\11\1\0\7\10\3\0\4\10\6\0\12\10"+
"\6\0\6\11\4\10\106\0\46\11\12\0\47\11\11\0\132\11\5\0"+
"\104\11\5\0\122\11\6\0\7\11\1\0\77\11\1\0\1\11\1\0"+
"\4\11\2\0\7\11\1\0\1\11\1\0\4\11\2\0\47\11\1\0"+
"\1\11\1\0\4\11\2\0\37\11\1\0\1\11\1\0\4\11\2\0"+
"\7\11\1\0\1\11\1\0\4\11\2\0\7\11\1\0\7\11\1\0"+
"\27\11\1\0\37\11\1\0\1\11\1\0\4\11\2\0\7\11\1\0"+
"\47\11\1\0\23\11\16\0\11\10\56\0\125\11\14\0\u026c\11\2\0"+
"\10\11\12\0\32\11\5\0\113\11\225\0\64\11\40\10\7\0\1\11"+
"\4\0\12\10\41\0\4\10\1\0\12\10\6\0\130\11\10\0\51\11"+
"\1\10\u0556\0\234\11\4\0\132\11\6\0\26\11\2\0\6\11\2\0"+
"\46\11\2\0\6\11\2\0\10\11\1\0\1\11\1\0\1\11\1\0"+
"\1\11\1\0\37\11\2\0\65\11\1\0\7\11\1\0\1\11\3\0"+
"\3\11\1\0\7\11\3\0\4\11\2\0\6\11\4\0\15\11\5\0"+
"\3\11\1\0\7\11\17\0\4\10\32\0\5\10\20\0\2\11\51\0"+
"\6\10\17\0\1\11\40\0\20\11\40\0\15\10\4\0\1\10\40\0"+
"\1\11\4\0\1\11\2\0\12\11\1\0\1\11\3\0\5\11\6\0"+
"\1\11\1\0\1\11\1\0\1\11\1\0\4\11\1\0\3\11\1\0"+
"\7\11\46\0\44\11\u0e81\0\3\11\31\0\11\11\6\10\1\0\5\11"+
"\2\0\3\11\6\0\124\11\4\0\2\10\2\0\2\11\2\0\136\11"+
"\6\0\50\11\4\0\136\11\21\0\30\11\u0248\0\u19b6\11\112\0\u51a6\11"+
"\132\0\u048d\11\u0773\0\u2ba4\11\u215c\0\u012e\11\322\0\7\11\14\0\5\11"+
"\5\0\1\11\1\10\12\11\1\0\15\11\1\0\5\11\1\0\1\11"+
"\1\0\2\11\1\0\2\11\1\0\154\11\41\0\u016b\11\22\0\100\11"+
"\2\0\66\11\50\0\14\11\44\0\4\10\17\0\2\11\30\0\3\11"+
"\31\0\1\11\6\0\3\11\1\0\1\11\1\0\207\11\2\0\1\10"+
"\4\0\1\11\13\0\12\10\7\0\32\11\4\0\1\11\1\0\32\11"+
"\12\0\132\11\3\0\6\11\2\0\6\11\2\0\6\11\2\0\3\11"+
"\3\0\2\11\3\0\2\11\22\0\3\10\4\0";
* Translates characters to character classes
final private static char [] yycmap = yy_unpack_cmap(yycmap_packed);
* Translates a state to a row index in the transition table
final private static int yy_rowMap [] = {
0, 42, 84, 126, 168, 126, 210, 126, 252, 294,
336, 378, 126, 126, 420, 462, 504, 126, 126, 126,
126, 126, 126, 126, 126, 126, 126, 546, 126, 588,
126, 630, 672, 714, 756, 126, 126, 798, 840, 882,
126, 924, 966, 1008, 1050, 336, 1092, 1134, 1176, 1218,
126, 126, 126, 126, 126, 126, 126, 126, 126, 126,
126, 126, 126, 126, 1260, 1302, 1344, 1386, 1428, 1470,
1512, 1554, 126, 1596, 1638, 1680, 1722, 126, 126, 126,
126, 126, 126, 126, 1764, 294, 1806, 294, 294
* The packed transition table of the DFA
final private static String yy_packed =
"\1\4\1\5\2\6\1\7\1\10\1\11\1\12\1\4"+
"\1\12\1\13\1\14\1\4\1\15\1\16\1\4\1\17"+
"\3\12\1\20\3\12\1\21\1\22\1\23\1\24\1\25"+
"\1\26\1\27\1\30\1\31\1\32\1\33\1\34\1\35"+
"\1\36\1\37\1\40\1\41\1\12\1\42\1\43\1\44"+
"\12\42\1\45\1\42\1\46\32\42\1\47\1\50\1\51"+
"\13\47\1\4\1\52\32\47\54\0\1\6\53\0\1\53"+
"\1\54\52\0\1\12\1\55\4\12\4\0\11\12\20\0"+
"\1\12\6\0\6\12\4\0\11\12\20\0\1\12\12\0"+
"\2\56\1\57\47\0\2\14\1\57\43\0\6\12\4\0"+
"\1\12\1\60\7\12\20\0\1\12\6\0\6\12\4\0"+
"\5\12\1\61\3\12\20\0\1\12\6\0\6\12\4\0"+
"\2\12\1\62\6\12\20\0\1\12\43\0\1\63\54\0"+
"\1\64\51\0\1\65\51\0\1\66\3\0\1\42\2\0"+
"\12\42\1\0\1\42\1\0\32\42\2\0\1\44\47\0"+
"\2\67\1\0\12\67\1\70\1\71\1\72\1\73\1\74"+
"\2\67\1\75\3\67\1\76\20\67\1\77\15\0\1\100"+
"\36\0\1\51\47\0\2\67\1\0\12\67\1\101\1\102"+
"\1\103\1\104\1\105\2\67\1\106\3\67\1\104\20\67"+
"\1\107\1\53\1\110\1\111\47\53\52\112\6\0\6\55"+
"\4\0\11\55\20\0\1\55\12\0\2\57\44\0\6\12"+
"\4\0\2\12\1\113\6\12\20\0\1\12\6\0\6\12"+
"\4\0\6\12\1\114\2\12\20\0\1\12\6\0\6\12"+
"\4\0\6\12\1\115\2\12\20\0\1\12\15\0\1\116"+
"\51\0\1\117\51\0\1\120\51\0\1\121\51\0\1\122"+
"\51\0\1\123\51\0\1\124\36\0\1\111\47\0\5\112"+
"\1\125\44\112\6\0\6\12\4\0\3\12\1\126\5\12"+
"\20\0\1\12\6\0\6\12\4\0\7\12\1\127\1\12"+
"\20\0\1\12\6\0\6\12\4\0\6\12\1\130\2\12"+
"\20\0\1\12\4\112\1\111\1\125\44\112\6\0\6\12"+
"\4\0\3\12\1\131\5\12\20\0\1\12";
* The transition table of the DFA
final private static int yytrans [] = yy_unpack(yy_packed);
/* error codes */
final private static int YY_UNKNOWN_ERROR = 0;
final private static int YY_ILLEGAL_STATE = 1;
final private static int YY_NO_MATCH = 2;
final private static int YY_PUSHBACK_2BIG = 3;
/* error messages for the codes above */
final private static String YY_ERROR_MSG[] = {
"Unkown internal scanner error",
"Internal error: unknown state",
"Error: could not match input",
"Error: pushback value was too large"
* YY_ATTRIBUTE[aState] contains the attributes of state <code>aState</code>
private final static byte YY_ATTRIBUTE[] = {
0, 0, 0, 9, 1, 9, 1, 9, 1, 1, 1, 1, 9, 9, 1, 1,
1, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 1, 9, 1, 9, 1,
1, 1, 1, 9, 9, 1, 1, 1, 9, 1, 0, 0, 1, 0, 1, 1,
1, 1, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9,
1, 1, 1, 1, 1, 1, 1, 1, 9, 0, 1, 1, 1, 9, 9, 9,
9, 9, 9, 9, 0, 1, 1, 1, 1
/** the input device */
private java.io.Reader yy_reader;
/** the current state of the DFA */
private int yy_state;
/** the current lexical state */
private int yy_lexical_state = YYINITIAL;
/** this buffer contains the current text to be matched and is
the source of the yytext() string */
private char yy_buffer[] = new char[16384];
/** the textposition at the last accepting state */
private int yy_markedPos;
/** the textposition at the last state to be included in yytext */
private int yy_pushbackPos;
/** the current text position in the buffer */
private int yy_currentPos;
/** startRead marks the beginning of the yytext() string in the buffer */
private int yy_startRead;
/** endRead marks the last character in the buffer, that has been read
from input */
private int yy_endRead;
/** number of newlines encountered up to the start of the matched text */
private int yyline;
/** the number of characters up to the start of the matched text */
private int yychar;
* the number of characters from the last newline up to the start of the
* matched text
private int yycolumn;
* yy_atBOL == true <=> the scanner is currently at the beginning of a line
private boolean yy_atBOL;
/** yy_atEOF == true <=> the scanner has returned a value for EOF */
private boolean yy_atEOF;
/** denotes if the user-EOF-code has already been executed */
private boolean yy_eof_done;
/* user code: */
StringBuffer string = new StringBuffer();
private InContestoParser mContesto = null;
private Symbol symbol(int type) {
return new JavaSymbol(type, yyline+1, yycolumn+1);
private Symbol symbol(int type, Object value) {
return new JavaSymbol(type, yyline+1, yycolumn+1, value);
private Symbol axSymbol(Object value) {
int tipo = 0;
CercaValore cercaVal = new CercaValoreComm(value.toString(),mContesto);
Ritorno rito = cercaVal.cercaValore();
int tipoSym = rito.getTipo();
if (tipoSym == Domini.tipoDatoNumerico) {
     tipo = AxSym.VAR_N;
else if (tipoSym == Domini.tipoDatoAlfanumerico) {
tipo = AxSym.VAR_A;
else if (tipoSym == Domini.tipoDatoBooleano) {
     tipo = AxSym.VAR_B;
JavaSymbol myJ = new JavaSymbol(tipo, yyline+1, yycolumn+1, value);
return myJ;
private Symbol axMetodo(Object value) {
int tipo = 0;
CercaValore cercaVal = new CercaValoreComm(value.toString(),mContesto);
Ritorno rito = cercaVal.cercaValore();
int tipoSym = rito.getTipo();
if (tipoSym == Domini.tipoDatoNumerico) {
     tipo = AxSym.MET_N;
else if (tipoSym == Domini.tipoDatoAlfanumerico) {
tipo = AxSym.MET_A;
else if (tipoSym == Domini.tipoDatoBooleano) {
     tipo = AxSym.MET_B;
JavaSymbol myJ = new JavaSymbol(tipo, yyline+1, yycolumn+1, value);
return myJ;
* Set the reader and reset variables
public void setReader(java.io.Reader in) {
this.yy_lexical_state = YYINITIAL;
this.yy_atEOF = false;
this.yy_atBOL = false;
this.yy_eof_done = false;
this.yy_state = 0;
this.yy_pushbackPos = 0;
this.yy_markedPos = 0;
this.yy_currentPos = 0;
this.yy_startRead = 0;
this.yy_endRead = 0;
this.yyline = 0;
this.yychar = 0;
this.yycolumn = 0;
this.yy_reader = in;
public void setContesto(InContestoParser xpContesto) {
mContesto = xpContesto;
public InContestoParser getContesto() {
return mContesto;
* Creates a new scanner.
* There is also java.io.Reader version of this constructor.
* @param in the java.io.Inputstream to read input from.
public AxScanner() throws java.io.IOException { this(System.in); }
* Creates a new scanner
* There is also a java.io.InputStream version of this constructor.
* @param in the java.io.Reader to read input from.
AxScanner(java.io.Reader in) {
this.yy_reader = in;
* Creates a new scanner.
* There is also java.io.Reader version of this constructor.
* @param in the java.io.Inputstream to read input from.
AxScanner(java.io.InputStream in) {
this(new java.io.InputStreamReader(in));
* Unpacks the compressed DFA transition table.
* @param packed the packed transition table
* @return the unpacked transition table
private static int [] yy_unpack(String packed) {
int [] trans = new int[1848];
int i = 0; /* index in packed string */
int j = 0; /* index in unpacked array */
while (i < 492) {
int count = packed.charAt(i++);
int value = packed.charAt(i++);
value--;
do trans[j++] = value; while (--count > 0);
return trans;
* Unpacks the compressed character translation table.
* @param packed the packed character translation table
* @return the unpacked character translation table
private static char [] yy_unpack_cmap(String packed) {
char [] map = new char[0x10000];
int i = 0; /* index in packed string */
int j = 0; /* index in unpacked array */
while (i < 1614) {
int count = packed.charAt(i++);
char value = packed.charAt(i++);
do map[j++] = value; while (--count > 0);
return map;
* Gets the next input character.
* @return the next character of the input stream, EOF if the
* end of the stream is reached.
* @exception IOException if any I/O-Error occurs
private int yy_advance() throws java.io.IOException {
/* standard case */
if (yy_currentPos < yy_endRead) return yy_buffer[yy_currentPos++];
/* if the eof is reached, we don't need to work hard */
if (yy_atEOF) return YYEOF;
/* otherwise: need to refill the buffer */
/* first: make room (if you can) */
if (yy_startRead > 0) {
System.arraycopy(yy_buffer, yy_startRead,
yy_buffer, 0,
yy_endRead-yy_startRead);
/* translate stored positions */
yy_endRead-= yy_startRead;
yy_currentPos-= yy_startRead;
yy_markedPos-= yy_startRead;
yy_pushbackPos-= yy_startRead;
yy_startRead = 0;
/* is the buffer big enough? */
if (yy_currentPos >= yy_buffer.length) {
/* if not: blow it up */
char newBuffer[] = new char[yy_currentPos*2];
System.arraycopy(yy_buffer, 0, newBuffer, 0, yy_buffer.length);
yy_buffer = newBuffer;
/* finally: fill the buffer with new input */
int numRead = yy_reader.read(yy_buffer, yy_endRead,
yy_buffer.length-yy_endRead);
if ( numRead == -1 ) return YYEOF;
yy_endRead+= numRead;
return yy_buffer[yy_currentPos++];
* Closes the input stream.
final public void yyclose() throws java.io.IOException {
yy_atEOF = true; /* indicate end of file */
yy_endRead = yy_startRead; /* invalidate buffer */
yy_reader.close();
* Returns the current lexical state.
final public int yystate() {
return yy_lexical_state;
* Enters a new lexical state
* @param newState the new lexical state
final public void yybegin(int newState) {
yy_lexical_state = newState;
* Returns the text matched by the current regular expression.
final public String yytext() {
return new String( yy_buffer, yy_startRead, yy_markedPos-yy_startRead );
* Returns the length of the matched text region.
final public int yylength() {
return yy_markedPos-yy_startRead;
* Reports an error that occured while scanning.
* @param errorCode the code of the errormessage to display
private void yy_ScanError(int errorCode) {
try {
System.out.println(YY_ERROR_MSG[errorCode]);
catch (ArrayIndexOutOfBoundsException e) {
System.out.println(YY_ERROR_MSG[YY_UNKNOWN_ERROR]);
System.exit(1);
* Pushes the specified amount of characters back into the input stream.
* They will be read again by then next call of the scanning method
* @param number the number of characters to be read again.
* This number must not be greater than yylength()!
private void yypushback(int number) {
if ( number > yylength() )
yy_ScanError(YY_PUSHBACK_2BIG);
yy_markedPos -= number;
* Contains user EOF-code, which will be executed exactly once,
* when the end of file is reached
private void yy_do_eof() throws java.io.IOException {
if (!yy_eof_done) {
yy_eof_done = true;
yyclose();
* Resumes scanning until the next regular expression is matched,
* the end of input is encountered or an I/O-Error occurs.
* @return the next token
* @exception IOException if any I/O-Error occurs
public java_cup.runtime.Symbol next_token() throws java.io.IOException {
int yy_input;
int yy_action;
while (true) {
boolean yy_counted = false;
for (yy_currentPos = yy_startRead; yy_currentPos < yy_markedPos;
yy_currentPos++) {
switch (yy_buffer[yy_currentPos]) {
case '\r':
yyline++;
yycolumn = 0;
yy_counted = true;
break;
case '\n':
if (yy_counted)
yy_counted = false;
else {
yyline++;
yycolumn = 0;
break;
default:
yy_counted = false;
yycolumn++;
if (yy_counted) {
if ( yy_advance() == '\n' ) yyline--;
if ( !yy_atEOF ) yy_currentPos--;
yy_action = -1;
yy_currentPos = yy_startRead = yy_markedPos;
yy_state = yy_lexical_state;
yy_forAction: {
while (true) {
yy_input = yy_advance();
if ( yy_input == YYEOF ) break yy_forAction;
int yy_next = yytrans[ yy_rowMap[yy_state] + yycmap[yy_input] ];
if (yy_next == -1) break yy_forAction;
yy_state = yy_next;
int yy_attributes = YY_ATTRIBUTE[yy_state];
if ( (yy_attributes & 1) > 0 ) {
yy_action = yy_state;
yy_markedPos = yy_currentPos;
if ( (yy_attributes & 8) > 0 ) break yy_forAction;
switch (yy_action) {
case 83:
{ yybegin(YYINITIAL); return symbol(AxSym.CHARACTER_LITERAL, new Character('\b')); }
case 90: break;
case 82:
{ yybegin(YYINITIAL); return symbol(AxSym.CHARACTER_LITERAL, new Character('\f')); }
case 91: break;
case 81:
{ yybegin(YYINITIAL); return symbol(AxSym.CHARACTER_LITERAL, new Character('\r')); }
case 92: break;
case 80:
{ yybegin(YYINITIAL); return symbol(AxSym.CHARACTER_LITERAL, new Character('\t')); }
case 93: break;
case 78:
{ yybegin(YYINITIAL); return symbol(AxSym.CHARACTER_LITERAL, new Character('\"')); }
case 94: break;
case 77:
{ yybegin(YYINITIAL); return symbol(AxSym.CHARACTER_LITERAL, new Character('\'')); }
case 95: break;
case 88:
{ return symbol(AxSym.BOOLEAN_LITERAL, new Boolean(false)); }
case 96: break;
case 87:
{ return symbol(AxSym.NULL_LITERAL); }
case 97: break;
case 85:
{ return symbol(AxSym.BOOLEAN_LITERAL, new Boolean(true)); }
case 98: break;
case 79:
{ yybegin(YYINITIAL); return symbol(AxSym.CHARACTER_LITERAL, new Character('\\')); }
case 99: break;
case 71:
case 72:
{ /* ignore */ }
case 100: break;
case 63:
{ yybegin(YYINITIAL); return symbol(AxSym.CHARACTER_LITERAL, new Character(yytext().charAt(0))); }
case 101: break;
case 62:
{ string.append( '\b' ); }
case 102: break;
case 61:
{ string.append( '\n' ); }
case 103: break;
case 60:
{ string.append( '\f' ); }
case 104: break;
case 59:
{ string.append( '\r' ); }
case 105: break;
case 58:
{ string.append( '\t' ); }
case 106: break;
case 57:
{ string.append( '\\' ); }
case 107: break;
case 56:
{ string.append( '\"' ); }
case 108: break;
case 55:
{ string.append( '\'' ); }
case 109: break;
case 25:
{ return symbol(AxSym.PLUS); }
case 110: break;
case 24:
{ return symbol(AxSym.COMMA); }
case 111: break;
case 23:
{ return symbol(AxSym.SEMI); }
case 112: break;
case 22:
{ return symbol(AxSym.RQUADRA); }
case 113: break;
case 21:
{ return symbol(AxSym.LQUADRA); }
case 114: break;
case 20:
{ return symbol(AxSym.RGRAFFA); }
case 115: break;
case 19:
{ return symbol(AxSym.LGRAFFA); }
case 116: break;
case 18:
{ return symbol(AxSym.RPAREN); }
case 117: break;
case 17:
{ return symbol(AxSym.LPAREN); }
case 118: break;
case 3:
case 37:
case 38:
case 41:
{ throw new RuntimeException("Illegal character \""+yytext()+"\" at line "+yyline+", column "+yycolumn); }
case 119: break;
case 4:
case 5:
{ /*return symbol(AxSym.INVIO);*/ /* ignore */ }
case 120: break;
case 6:
{ return symbol(AxSym.DIVIDE); }
case 121: break;
case 7:
{ return symbol(AxSym.TIMES); }
case 122: break;
case 8:
case 9:
case 14:
case 15:
case 16:
case 47:
case 48:
case 49:
case 74:
case 75:
case 76:
case 86:
{ return axSymbol(yytext()); }
case 123: break;
case 10:
case 11:
{ return symbol(AxSym.INTEGER_LITERAL, new Integer(yytext())); }
case 124: break;
case 12:
{ yybegin(STRING); string.setLength(0); }
case 125: break;
case 13:
{ yybegin(CHARLITERAL); }
case 126: break;
case 26:
{ return symbol(AxSym.MINUS); }
case 127: break;
case 27:
{ return symbol(AxSym.ORB); }
case 128: break;
case 28:
{ return symbol(AxSym.ANDB); }
case 129: break;
case 29:
{ return symbol(AxSym.GT); }
case 130: break;
case 30:
{ return symbol(AxSym.EQ); }
case 131: break;
case 31:
{ return symbol(AxSym.LT); }
case 132: break;
case 32:
{ return symbol(AxSym.NEG); }
case 133: break;
case 33:
{ string.append( yytext() ); }
case 134: break;
case 34:
case 35:
{ throw new RuntimeException("Unterminated string at end of line"); }
case 135: break;
case 36:
{ yybegin(YYINITIAL); return symbol(AxSym.STRING_LITERAL, string.toString()); }
case 136: break;
case 39:
case 40:
{ throw new RuntimeException("Unterminated character literal at end of line"); }
case 137: break;
case 44:
{ return axMetodo(yytext()); }
case 138: break;
case 46:
{ return symbol(AxSym.FLOATING_POINT_LITERAL, new Float(yytext())); }
case 139: break;
case 50:
{ return symbol(AxSym.DUEP); }
case 140: break;
case 51:
{ return symbol(AxSym.GE); }
case 141: break;
case 52:
{ return symbol(AxSym.LE); }
case 142: break;
case 53:
{ return symbol(AxSym.NE); }
case 143: break;
case 54:
case 64:
case 65:
case 66:
case 67:
case 68:
case 69:
case 70:
{ throw new RuntimeException("Illegal escape sequence \""+yytext()+"\""); }
case 144: break;
default:
if (yy_input == YYEOF && yy_startRead == yy_currentPos) {
yy_atEOF = true;
yy_do_eof();
{     return new java_cup.runtime.Symbol(AxSym.EOF);
else {
yy_ScanError(YY_NO_MATCH);
}

I setted use Javac checkbox and it worked ???
Could someone explain me what happened ?
The problem seems to be in the very long privated final string I defined, making it shorther the problem is solved again .
Tks
Tullio

Can't figure out why FPGA code won't compile, says files are missing

Hey guys, I get the following error, sorry for the big vomit of error code. As near as I can tell from reading that, it thinks a number of the files it requires to run some of the subvi's I'm calling are missing. I don't understand how to fix this when these are LabView native files, for example, the high-throughput rectangular to polar converter?
Help much appreciated.
Error code follows:
Error 7 occurred at Open VI Reference in nirviOpenVIRefByNameOrPath.vi->niFpgaRemapObjsAndListIfUnderXNode.vi->niFpgaRemapObjsHandleXNodeSubErrors.vi->nirviMassageErrorList.vi->nirviParseAndMassageErrors.vi->nirviReloadErrorList.vi->nirviGenerateErrors.vi
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
=========================
NI-488: Nonexistent GPIB interface.
VI Path:
All text parsed:
<CodeGenErr>
<ErrorCode>-61160</ErrorCode>
<DynamicText><TreeLineInfo><LineInfo><DiagramObject><VIPath>C:\NIFPGA2009\clntTmp\FPGAImagi~2C_FPGATarg~A7_2Tap8bit~6A_nagEfsCz~08\MungedForFPGA\NI.Munge.2 Tap 8 bit RT Image Processing Initial.vi_FPGACompileCopy00000001.vi</VIPath>
<UID>5485</UID>
<ObjectName>High Throughput Rectangular To Polar</ObjectName>
</DiagramObject>
</LineInfo>
</TreeLineInfo>
</DynamicText>
</CodeGenErr>
<CodeGenErr>
<ErrorCode>-61101</ErrorCode>
<DynamicText><TreeLineInfo><TreeInfo><TreeID>1</TreeID>
</TreeInfo>
<LineInfo><DiagramObject><VIPath>C:\NIFPGA2009\clntTmp\FPGAImagi~2C_FPGATarg~A7_2Tap8bit~6A_nagEfsCz~08\MungedForFPGA\NI.Munge.2 Tap 8 bit RT Image Processing Initial.vi_FPGACompileCopy00000001.vi</VIPath>
<UID>5036</UID>
<ObjectName>SubVI: 'Butterworth Filter'</ObjectName>
</DiagramObject>
</LineInfo>
</TreeLineInfo>
</DynamicText>
</CodeGenErr>
<CodeGenErr>
<ErrorCode>-61101</ErrorCode>
<DynamicText><TreeLineInfo><TreeInfo><TreeID>1</TreeID>
</TreeInfo>
<LineInfo><DiagramObject><VIPath>C:\Program Files\National Instruments\LabVIEW 2009\vi.lib\rvi\Analysis\utilities\niFPGA I32xI32 Dot Product - 3 elements I64.vi</VIPath>
<UID>63</UID>
<ObjectName>Timed Loop</ObjectName>
</DiagramObject>
</LineInfo>
</TreeLineInfo>
</DynamicText>
</CodeGenErr>
<CodeGenErr>
<ErrorCode>-61101</ErrorCode>
<DynamicText><TreeLineInfo><TreeInfo><TreeID>1</TreeID>
</TreeInfo>
<LineInfo><DiagramObject><VIPath>C:\NIFPGA2009\clntTmp\FPGAImagi~2C_FPGATarg~A7_2Tap8bit~6A_nagEfsCz~08\MungedForFPGA\NI.Munge.2 Tap 8 bit RT Image Processing Initial.vi_FPGACompileCopy00000001.vi</VIPath>
<UID>5036</UID>
<ObjectName>SubVI: 'Butterworth Filter'</ObjectName>
</DiagramObject>
</LineInfo>
</TreeLineInfo>
</DynamicText>
</CodeGenErr>
<CodeGenErr>
<ErrorCode>-61101</ErrorCode>
<DynamicText><TreeLineInfo><TreeInfo><TreeID>1</TreeID>
</TreeInfo>
<LineInfo><DiagramObject><VIPath>C:\NIFPGA2009\clntTmp\FPGAImagi~2C_FPGATarg~A7_2Tap8bit~6A_nagEfsCz~08\MungedForFPGA\NI.Munge.2 Tap 8 bit RT Image Processing Initial.vi_FPGACompileCopy00000001.vi</VIPath>
<UID>5036</UID>
<ObjectName>SubVI: 'Butterworth Filter'</ObjectName>
</DiagramObject>
</LineInfo>
</TreeLineInfo>
</DynamicText>
</CodeGenErr>

GotRobotFriends,
Hello! First of all, can I get the following information from you?
1.) LabVIEW and LabVIEW FPGA Versions
2.) FPGA Target you are trying to compile code for.
Typically errors 61101 and 61160 are thrown when a Single Cycle Timed Loop (SCTL) has elements within it that won't allow it to finish it's execution in 1 clock cycle.
Looking through the error codes below, do you have any of the following items in a Single Cycle Timed Loop?
High Throughput Rectangular To Polar
Butterworth Filter
Also, are you using xnodes? Problems have been seen when items that would normally return an error when placed in a SCTL do not return errors if they are used with xnodes.
Ben Sisney
FlexRIO V&V Engineer
National Instruments

Error code 1054: compiling error on examples with the 5640R

Hi,
I'm trying to use the 5640R to analyze the I and Q outputs of a set of downconversion mixers. I found that I might be able to slightly modify some of the examples that came with driver 1.3. However, when I tried to compile the FPGA part of the "ni5640R Analog Input and Output" example (before I made any modifications), I get a Code Generation Error 1054 (Cut and pasted below)
Error 1054 occurred at nirviUIDToObject.vi
Possible reason(s):
Error getting object reference for UID.
All text parsed:
<CodeGenErr>
<ErrorCode>1</ErrorCode>
<DynamicText>Internal software error occurred getting module generator VI Paths (2)</DynamicText>
</CodeGenErr>
<CodeGenErr>
<ErrorCode>7</ErrorCode>
<DynamicText>Error calling module generator VI: NULL</DynamicText>
</CodeGenErr>
<CodeGenErr>
<ErrorCode>1</ErrorCode>
<DynamicText>Internal software error occurred getting module generator VI Paths (2)</DynamicText>
</CodeGenErr>
<CodeGenErr>
<ErrorCode>7</ErrorCode>
<DynamicText>Error calling module generator VI: NULL</DynamicText>
</CodeGenErr>
<CodeGenErr>
<ErrorCode>1</ErrorCode>
<DynamicText>Internal software error occurred getting module generator VI Paths (2)</DynamicText>
</CodeGenErr>
The code goes on for pages and pages. When I use the pre-compiled "NI5640R Analog Input and Output (FPGA)" module that came with the driver, I seem to have no problems. Could anybody please shed some light on the issue?
Thank.
Richard Tseng

Hi, I just wanted to report that I seem to have solved the problem. The issue was that while Labview was recently updated to version 8.6.1, the Labview FPGA module stayed at version 8.6. I found information leading to the solution through these two posts:
http://forums.ni.com/ni/board/message?board.id=170&thread.id=423223
http://digital.ni.com/public.nsf/allkb/A711119FE89E39E78625754E00075E92
Richard Tseng

VISA Errorcode -1073807202

I am trying out the Evaluation of LabView 7.
I want to use the hp34970a-example. But when I am compiling I get the VISA Errorcode -1073807202.
"VI_ERROR_LIBRARY_NFOUND A code library required by VISA could not be located or loaded."
But is it because I only have the 30 days evaluation ?
How can I fix the problem and communicate with the hp34970a ?
Looking foreward hearing from you.

Make sure that NI-VISA or the NI-VISA Run-Time Engine is installed on the computer. This error suggests that NI-VISA is not installed, or there is a problem with the installation. To remedy this, uninstall any existing versions of NI-VISA on the machine. Then, either reinstall the same version of NI-VISA, or upgrade to the latest version of NI-VISA.

Error in compiling Photoshop CC 2014 sample project

Hi,
I am trying to compile SDK sample project "outbound". but it is showing errors, as "Parse Issue: Unknown type name 'DialogPtr' " in DialogUtilities.h .
DialogUtilities.h file is in "Adobe Photoshop CC 2014:photoshopsdk:pluginsdk:samplecode:common:includes".
even if I add this path in project settings it still shows the errors.
how can I make this work?
I am using Photoshop CC 2014 and Xcode version is 4.6.3 (4H1503)
If you have any idea regarding project settings then please let me know.
Thanks and regards,
Priyanka.

Are you using the CC 2014 release of the SDK?
The DialogUtilities.h for mac do not work. They are the old Carbon API's. See the Dissolve example for an Objective-C UI.
I would comment out the DialogUtilities.h include and other associated headers for Carbon UI. Some Carbon calls still work that are unrelated to UI.

Compilations: Can you show just one album cover with mixes/compiations?

Using the current iTunes (11.01) is a misery. I have numerous mix discs and compilations, and for each title eg Royksopp's BACK TO MINE mix, there are about 15 tiles of the album, one for each song. In extreme cases, there may be over 100. Since I have God knows how many songs, easily in the tens of thousands, this is an extremely inefficient way to display my collection.
Is there any way to display albums with just the one album cover and title showing each time? THis is ridiculous.
Thanks in advance.

Wow!
Is that really so?
I'm not questioning your answer. Just want to make sure before I say OK and let it be. I had heard that iTunes/iPod forces you to do things their way, this is an example, I guess!
Thanks for the input.
I guess I'll just have to leave it be!
Is iTunes the only way to deal with iPod? Are there any other programs?
Bob

Error in executing a process for compilation for jsp

We have an iView which has jsp pages in it. We deployed the par & try toaccess the iview & we get an exception. The issue is that the iview has a jsp page. At the run time, this jsp is converted into a .java file
without problem. But EP engine is having issues compiling this java fileinto .class file.
On the other hand this same iview works just fine on our windows installation. Only Solaris EP install is having problems. The version onwindows as well as on Solaris is EP6 SP9.
Here is the exact version on the solaris EP:
sap.com/SAP-JEECOR 6.40 SP9 (1000.6.40.9.0.20041119045253) 20041122132733
sap.com/SAP-JEE 6.40 SP9 (1000.6.40.9.0.20041119045409) 20041122132741
When I copy the .class file from windows to unix machine, the iView works fine. Here is the exception I am getting:
>>> JSPCompiler >>> error
[email protected]a188b
[EXCEPTION]
com.sapportals.portal.prt.servlets_jsp.server.compiler.CompilingException:
Error in executing a process for compilation
at
com.sapportals.portal.prt.servlets_jsp.server.compiler.impl.J2eeCompiler_6_30.launchCompilerProcess(J2eeCompiler_6_30.java:574)
at
com.sapportals.portal.prt.servlets_jsp.server.compiler.impl.J2eeCompiler_6_30.compileExternal(J2eeCompiler_6_30.java:370)
at
com.sapportals.portal.prt.servlets_jsp.server.compiler.impl.J2eeCompiler_6_30.compile(J2eeCompiler_6_30.java:672)
at
com.sapportals.portal.prt.servlets_jsp.server.jsp.JSPParser.parse(JSPParser.java:2143)
at
com.sapportals.portal.prt.servlets_jsp.server.jsp.JSPCompiler.compile(JSPCompiler.java:76)
at
com.sapportals.portal.prt.servlets_jsp.server.jsp.JSPCompiler.run(JSPCompiler.java:122)
at
com.sapportals.portal.prt.core.broker.JSPComponentItem.compileJSP(JSPComponentItem.java:279)
at
com.sapportals.portal.prt.core.broker.JSPComponentItem.getComponentInstance(JSPComponentItem.java:129)
at
com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.service(PortalComponentItemFacade.java:355)
at
com.sapportals.portal.prt.core.broker.PortalComponentItem.service(PortalComponentItem.java:934)
at
com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:435)
at
com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:527)
at
com.sapportals.portal.prt.component.AbstractComponentResponse.include(AbstractComponentResponse.java:89)
at
com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:232)
at com.sapportals.portal.htmlb.page.JSPDynPage.doOutput(JSPDynPage.java:76)
at
com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:129)
at
com.sapportals.portal.htmlb.page.PageProcessorComponent.doContent(PageProcessorComponent.java:134)
at
com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at
com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at
com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at
com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at
com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at
com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:646)
at
com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at
com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at
com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at
com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at
com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:232)
at
com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)
at java.security.AccessController.doPrivileged(Native Method)
at
com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at
com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:153)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at
com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:385)
at
com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:263)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:340)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:318)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:821)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:239)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at
com.sap.engine.services.httpserver.server.Processor.request(Processor.java:147)
at
com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
at
com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at
com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
I am having the same issue with another iview which has jsp page in it.
The web dynpro iview works fine.

Hi, seems like there's some typo in your jsp. Check the .java file listed with a java editor (like eclipse or devstudio.). Maybe you'll find the typo this way faster.
Most often, a multiline page import hampers jsp compilation,
e.g.
<%@page import="java.util.List,
java.util.Map"%>
needs to be
<%@page import="java.util.List,java.util.Map"%>
Regards,
Armin

Error in executing a process for compilation

Hi:
Our portal version is 6.0.2.28.0 (SAPJ2EE PL29)
we have the following problem:
1.- the developer upload a component in portal, but when he tries to run it, the following error appears:
Mar 28, 2005 4:22:06 PM # Client_Thread_8 Fatal >>> JSPCompiler >>> ERROR in Compiling :JSPFileInfo :4782283
JSP File : /usr/sap/J2EE_DP3/j2ee/j2ee_00/cluster/server/services/servlet_jsp/work/jspTemp/irj/root/WEB-INF/portal/portalapps/PRUEBA
_PCCLibragestMostrarPlantillas/pagelet/MostrarPlantillas.jsp
Class Name: sapportalsjspMostrarPlantillas
Java File : /usr/sap/J2EE_DP3/j2ee/j2ee_00/cluster/server/services/servlet_jsp/work/jspTemp/irj/root/WEB-INF/portal/portalapps/PRUEB
A_PCCLibragestMostrarPlantillas/work/pagelet/_sapportalsjsp_MostrarPlantillas.java
Package Name : pagelet
Class File : /usr/sap/J2EE_DP3/j2ee/j2ee_00/cluster/server/services/servlet_jsp/work/jspTemp/irj/root/WEB-INF/portal/portalapps/PRUE
BA_PCCLibragestMostrarPlantillas/work/pagelet/_sapportalsjsp_MostrarPlantillas.class
Is out dated : false
com.sapportals.portal.prt.servlets_jsp.server.compiler.CompilingException: Error in executing a process for compilation
2.- If I stop/start SAPJ2EE the component, which was uploaded before,can be run without problem, but if you upload it again,when you try to run it again, the compilation error appears
Any suggestion???
Thanks

Hi:
the problem was not resolved deleting/uploading the components, the problem was resolved increasing the memory in the host and tuning the JVM memory parameters.
In our host the memory was reduced and this was the origin of the problem
Thanks

Error in executing a process for Flex compilation ....exceeds 32K...

Hi,
deployin my model i get the following error-message.
"Error in executing a process for Flex compilation, Error: Branch between 64935 and 97770 around line 0 exceeds 32K span. If possible, please refactor this component.
Error: Branch between 64935 and 97770 around line 0 exceeds 32K span."
Do i delete a sort-element from my model it is deployed very well. So what does this message exactly mean and how can I locate where the error occurs and how can i fix that problem because i need this sort-element to be in my model.
Thanks for your help!
Tobias

Hi Tobias,
You are receiving this error due to a current limitation in the Flex server. How you can fix this is to split the iView you are currently working on into two iViews, and embed one within the other. This will decrease the size of the current iView you are receiving the error for and eliminate this problem.
Hope this helps
Cheers,
Scott

Compilation error while calling static method from another class

Hi,
I am new to Java Programming. I have written two class files Dummy1 and Dummy2.java in the same package Test.
In Dummy1.java I have declared a static final variable and a static method as you can see it below.
package Test;
import java.io.*;
public class Dummy1
public static final int var1= 10;
public static int varDisp(int var2)
return(var1+var2);
This is program is compiling fine.
I have called the static method varDisp from the class Dummy2 and it is as follows
package Test;
import java.io.*;
public class Dummy2
public int var3=15;
public int test=0;
test+=Dummy1.varDisp(var3);
and when i compile Dummy2.java, there is a compilation error <identifier > expected.
Please help me in this program.

public class Dummy2
public int var3=15;
public int test=0;
test+=Dummy1.varDisp(var3);
}test+=Dummy1.varDisplay(var3);
must be in a method, it cannot just be out somewhere in the class!

Error while compiling forms10g in Unix with webutil features.

Hi,
I developed a form called test.fmb and attached webutil.pll. change all text_io to client_text_io.
Copied the file to unix and tried to compile, it says
CLIENT_TEXT_IO.FILE_TYPE must be declared.
(Please note that webutil.pll has been compiled and .plx file is generated).
Please help.
Thanks.

Our Forms_90 Path is
FORMS90_PATH=/AppsTop/FRMTOP/app/9.0.4/forms90:/AppsTop/FRMTOP/app/9.0.4/pi:/AppsTop/FRMTOP/app/9.0.4/webutil:/AppsTop/FRMTOP/app/9.0.4/webutil/forms
I just copied webutil.pll from
:/AppsTop/FRMTOP/app/9.0.4/webutil/forms/webutil.pll to
my local directory C:\webutil.pll
I attached the C:\webutil.pll under Attached Libraries in test.fmb in my own PC.
Please advice.
Thanks,
Mano.

Grouping compilations no longer works after adding artwork..!

Until yesterday I had never bothered with adding artwork to my itunes library as I had a gen 3 iPod that would not show it anyway. I have a new ipod so last night I decided to add artwork, this I did by getting what I could from Gracenote, the rest I have been dragging from images on Amazon and other sites. Ever since doing this the Group Compilations option no longer works, despite having this checkbox ticked in preferences and making sure that the yes box for part of a compilation is ticked for these albums. In addition, every song in a compilation album is displayed individually in the Cover Flow view option.
Is this a peculiarity of 7.2 or is there a way I can get this to work again? I am sure it is something to do with having added artwork as it was working fine before.
The help menu in itunes seems to have stopped working too now, which doesn't help...obviously!

Until yesterday I had never bothered with adding artwork to my itunes library as I had a gen 3 iPod that would not show it anyway. I have a new ipod so last night I decided to add artwork, this I did by getting what I could from Gracenote, the rest I have been dragging from images on Amazon and other sites. Ever since doing this the Group Compilations option no longer works, despite having this checkbox ticked in preferences and making sure that the yes box for part of a compilation is ticked for these albums. In addition, every song in a compilation album is displayed individually in the Cover Flow view option.
Is this a peculiarity of 7.2 or is there a way I can get this to work again? I am sure it is something to do with having added artwork as it was working fine before.
The help menu in itunes seems to have stopped working too now, which doesn't help...obviously!

Compiling Apache 1.3.9 & PHP 3.0.12 to use Oracle 8.1.5 on SuSe 6.2

Hi!
I am trying to compile the above packets but am running into massive problems.
PHP3 compiles well, if i try to use the "normal" static module for Apache, but the Apache configure script says that it needs an ANSI C compiler and stops.
I am using GCC 2.7.2.3 with the bugfixes from SuSe.
Since that did not work I tried the configuration as a Dynamic Module. The Apache "Readme.config" explains two ways to do so, but the first has the same problem with GCC and the second (via APXS) compiles Apache without problems, but PHP3 wont compile since it does not find a library. The exact error is: "/usr/i486-linux/bin/ld: cannot open -lclntsh: No such file or directory"
I found a libclntsh.so.8.0 in the oracle/lib directory, but since i fumbled around with this library (i tried ln -s libclntsh.so.8.0 libclntsh.so) sqlplus says libclntsh.so.8.0: cannot find file data: no such file or directory (even now that the link is deleted again).
And PHP still wont compile. Any ideas would be welcome.
P.S.: Is it normal that Oracle has to be told NOT to create a database during install, TO create a database???
We worked for 3 days on the Oracle installation and that was the only way to install Oracle without errors.
thx
Uwe Schurig

Lee Bennett (guest) wrote:
:Hi
:I have successfully installed Oracle 8.1.5 Enterprise edition
on
:Suse 6.2 and applied the 8.1.5.0.1 patch set,
NO!
SuSe 6.2 have a patch file for Oracle made from their developers.
Never use Oracle 8.1.5.0.1 patch file that doesn't work because
us bugged.
Use SuSe 6.2 Oracle patch set.
(don't remember the web page where you can download it but a
search with word "oracle" from SuSe homepage will lead you to
it)
-Stefano
null

Errorcode 6 compiling

Similar Messages

Maybe you are looking for