Errors Batch Captures!! Tips for setting up Batch list corre

I have set up a Batch List, and I keep getting an error after I have imported the Batch capture list, when I go to Batch Capture I keep getting an error about Timecode? I am also wondering when doing a Batch List is ok to begin with 00:00:00:00 timcode as a media begin? As batch capture truly saves a lot time, I sincerely appreciate your time in courtesy in replying to my post.
Sebastian

I avoid this problem by shooting the first 30 seconds of each tape to throw away. That way, my starting code for any new tape is always at least 00:00:30;00. I started doing this back with FCP 3 (and now have FCP 5). So, I don't know if this is still an issue with the newer version. I do know, however, that working with timecodes below 30 seconds was a pain. Before I learned this trick, I would be able batch capture all of my other clips. Then, the first clip on each tape I would use Capture Now (which seemed to be less finicky with the low time codes).
I hope this helps.

Similar Messages

  • Tips For Setting Up a Mac For a Senior Citizen?

    I have given my 84 year old Mom my old iBook to use & I was just curious if anyone had any tips for making things easier for her. I enlarged the size of the cursor & made the text somewhat larger. She's basically just using it for Mail, but I would LOVE to get her internet savvy as well. I also just ordered some over-size stickers for the keyboard which should help. Anything else that anyone can think of...? She only visits once a year & I need to cram as much knowledge into her as I can in a week.

    You're on the ball and doing just fine for her. Keep the dock relatively large and get rid of some of the apps there that might confuse her. Launch Safari and make sure the text in the web pages are large enough. What type of internet connection does she have? If it's broadband and not dial up she can keep the iBook running 24/7. She doesn't have to quit mail so she'll get your email all the time. And, maybe keep her away from eBay.

  • Need guidance for setting up distribution list

    I have OD setup, I have Mailing Lists setup for groups such as IT, Marketing, etc.
    The only thing I have not quite figured out is setting up distribution lists for outside senders that can be distributed to LDAP users in OD. I have been searching the forums and have found bits and pieces of data, but cannot yet locate any guidance for getting this setup.
    I thought that this would be handled in the /etc/aliases file, but it appears that this only applies to local users.
    If someone could point me in the right direction, I would be grateful.

    I understand that more than 15,000 photos in a catalogue will degrade Lightroom's  performance
    100% incorrect false misleading don't listen to this nonsense, people in this and other forums have over 1/4 million photos in a single catalog
    I am concerned that several catalogues will be confusing about which catalogue a specific image is in.
    Very smart!
    What guidance can someone suggest for creating and organizing multiple catalogues?
    Use a single catalog, and move towards keyword/caption/metadata organizing rather than folder-based organizing (as much as can practically be done given the time constraints in your life)

  • When creating a resume and not using the provided templates... How do you set the page up to all you to utilize left and right flush margins at the on the same line?  Any other tips for setting up the document for a resume would be appreciated!  Thanks...

    For an example......
    SUMMARY
    ksdlkasjdflksdmflkagflkaglaksdfmlksadmflaksmdflaskdmflaksfgalkfdgndflkngladfknga lmfv,amsdglkaglkajglkjalkgfmlmv.zmxcv.mldkglksdgjlskdfjglskdfglkdsfgmlsdkfmg
    PROFESSIONAL EXPERIENCE
    Comapny                                                                                                                                                                                                                 Location
    Title                                                                                                                                                                                                                            Date
    This side left flush                                                                                                                                                                              This side right flush
    Also, as another option how would I set up a template save it to use for motifying my resume according to the specific job inwhich I am applying?
    Thanks!

    That is poor type layout.
    European languages read left to right, a ragged left edge is the worst possible layout for listed data.
    The only circumstance you should use the left/right alignment is in header/footers for running heads and page numbers wheer they are widely separated and therefore easy to scan as individual short snipetts of text.
    Peter

  • Request Tips for Setting up Test Modules (HRMS, AR, AP) in R12

    Hi
    I am fairly new to Oracle Financials and recently installed R12 on my linux box for trying and testing. My question may sound silly to many but please bear with me. After Installation I could login with SYSADMIN account and I can see Oracle E Business Suite, Oracle Applications Home Page.
    On the lefthand side I can see the following options.
    Application Developer
    Application Diagnostics
    Auditing Manager
    CRM HTML Administration
    CRM HTML Developer
    Integrated SOA Gateway
    Preferences SSWA
    System Administration
    System Administrator
    User Management
    Workflow Administrator Web Applications
    Workflow User Web Applications
    Now my question is how can I goto the screens of HRMS or Account Receivables etc from where I can customize the module. For example, if I want to define the chart of accounts, form where shall I start since the options listed above dont mention anything related to Accounts or HR or Inventory etc.
    Any help will be appreciated.
    Please note that I chose almost all the options during the installation time therefore I am 100% sure that these modules must have been installed.
    Thank you all in advance.

    On the lefthand side I can see the following options.
    Application Developer
    Application Diagnostics
    Auditing Manager
    CRM HTML Administration
    CRM HTML Developer
    Integrated SOA Gateway
    Preferences SSWA
    System Administration
    System Administrator
    User Management
    Workflow Administrator Web Applications
    Workflow User Web Applications
    Now my question is how can I goto the screens of HRMS or Account Receivables etc from where I can customize the module. For example, if I want to define the chart of accounts, form where shall I start since the options listed above dont mention anything related to Accounts or HR or Inventory etc.Click on those responsibilities to see their screens. If you do not have the responsibility added to your account, go to (System Administrator responsibility > Security > Define), query your username, and add the responsibility.
    Any help will be appreciated.
    Please note that I chose almost all the options during the installation time therefore I am 100% sure that these modules must have been installed.
    Thank you all in advance.You can find EBS R12 docs at http://docs.oracle.com/cd/E18727_01/index.htm
    Thanks,
    Hussein

  • Tips for DPS publishing for display on ipad & widescreen TVs

    Im looking into the use of ipad as a presentation controller, for connection to an HD TV (using HDMI?, apple TV? ideas?) for display.
    At the moment Ive designed folios horizontal at 768x1024 for ipad screen but should I instead be designing them at 1080 tall since the TV display for my audience is the priority?
    If I do that what happens to the ipad screen during display? does it cut off the edges? or squeeze to fit? or does it display at all?
    Ideally I would like the TV screen to display my folio full screen (without any black bars) but still be able to control, swipe and control interactivity from the ipad.
    Anyone have experience and tips for setting this up?
    thanks

    This question is related to AirPlay, not dps.
    When you mirror your iPad to an apple tv the output is always the same in 4:3 aspect ratio. This is for anything: the home screen, the web, games, magazines. Only videos might play in full screen on the apple tv.
    —Johannes

  • "No recipients are set in [Recipient List]" -- Can't print to pdf!

    Since I upgraded to 10.5.7 a few weeks ago, I can't print to pdf. It seems that the upgrade might not be compatible with the workflows. I generated a new workflow as plug in, same error message:
    "No recipients are set in [Recipient List]"
    I am at a loss. Any help welcome.
    Charles

    The problem seems to be with the 10.5.7 update. I couldn't get my MF4150 to work without that error msg. When I looked at the info on my driver (system preferences/print&fax/options&supplies/driver) it appeared I was using the fax driver all of a sudden, but with the option to switch drivers greyed out.
    I then reset the printer system (right click the printer) then reinstalled the drivers, still no luck. So finally, I removed both drivers (select "-" underneath the printer list) and then added a driver manually (select "+") and selected canon mf4100 series (as opposed to canon mf4100 series (fax)) and waited a minute or so for the computer to find the driver. When it found it, the option "print using" defaulted to "fax," so I instead picked "UFR II printer," clicked add, made it my default, and it worked fine. (I later also added the fax driver, not sure why i need it but what the heck). Hope this helps.

  • Batch create multiple pdf's while using epilogue.ps for setting initial view and opening bookmarks

    Hi,
    I'm trying to batch create multiple pdf's from word files, and use the epilogue.ps file for setting the initial view and opening the bookmarks panel, but i keep getting no satisfying result.. i'm probably missing something fundamental.
    I've read some forum posts and adobe help posts explaining this, so i'm pretty sure this would be possible?
    Reference:
    http://help.adobe.com/en_US/acrobat/X/pro/using/WS58a04a822e3e50102bd615109794195ff-7f0f.w .html  see advanced panel options
    http://help.adobe.com/en_US/acrobat/using/WS58a04a822e3e50102bd615109794195ff-7f14.w.html
    System: Windows 7
    Acrobat: Acrobat X professional
    i've searched for and found a way to overwite the epilogue.ps file and have inserted the following:
    %  Insert your custom PostScript here...
    [ /PageMode /UseThumbs
    /Page 1 /View [/Fit ]
    /DOCVIEW pdfmark
    After that i checked my Adobe Acrobat preferences, and in the categorie 'Convert to Pdf' i selected 'Microsoft office word' in the select area 'Converting to pdf'.
    Clicked 'Edit settings' to allow creating a joboptions file (field: 'adobe pdf settings') which has the option 'Use epiloque.ps and prologue.ps' checked in the advanced section.
    So now i thought i would have everyting setup to create my pdf's, however, my view isn't changed to fit, nor are there any bookmarks or in this case thumbs (i used /useThumbs) visible.
    Did i miss something obvious? Is there a better way to test this? Any help would be appreciated!

    i like it about that ok in how to open my site

  • Error reading batch list

    This used to be easy as far as I can remember last year imports. Now I cannot import a batch list and FCP 6.0.4 gives me the error message "One or more items on the header line do not match valid Browser column headers." The list is a tab-delimited simple text file with just four headers - Name, Media Start, Media End and Reel. They are exactly the same headers that are minimally necessary for successful batch list imports as described on page 311 of the user manual; no misspellings.
    Does anybody have an idea?

    Hi
    I've received two responses to this problem on the Creative Cow. These suggestions didn’t work for me, but they did help me find a workaround.
    In summary:
    tab delimited text files do not work for my set up
    cleaner text files do
    I think one issue here may be that I don’t have Microsoft Office. I use iWork, which I like a lot for all the classic Apple reasons. As I suspect the number of iWork-FCP users in the world will grow, I’ve uploaded another zip file which contains batch lists that work, batch lists that don't work, a summary of what I think are the reasons, plus two Automator workflows:
    http://homepage.mac.com/aldopalumbo/BatchListImportTest/FileSharing75.html
    best

  • Tips for blue screen (BSOD) errors with Windows Vista and Intel Turbo Memory on X61/X61s

    Important note: The symptoms and solutions described below address only a small subset of the possible causes for blue screen errors, aka BSOD.
    This information can help address blue screen errors specifically
    related to Turbo Memory, but may not solve errors related to other
    issues. Please read through the instructions completely, make sure they
    apply to your system, and after attempting the solutions please post
    back with your feedback for the community.
    Some users may experience random blue screen errors with ThinkPad
    systems running Windows Vista with Intel Turbo Memory hardware. These
    blue screens may occur during normal usage on the system or they may
    occur when booting into Windows Vista. Blue screens related to the
    Intel Turbo Memory hardware may reference a stop code of 8086 with
    memory address locations of {0, 0, 0, 0}.
    There are two main steps that you can take to help resolve blue screen issues related to Intel Turbo Memory.
    Step 1: Update Intel Turbo Memory Driver
    If the driver version is before version 1.0.1.1004-7.0.3.1001, please
    update to this version.
    To determine what version of the Intel Turbo Memory driver is installed:
    1.    Click Start, then click Control Panel.
    2.    Click System and Maintenance.
    3.    Click System.
    4.    Click Device Manager.
    5.    Expand the Storage controllers category.
    6.    Double-click Intel Flash Cache Logic Chip.
    7.    Click the Driver tab. Then you will see the driver version (for example, 1.0.1.1004).
    The new driver and installation instructions can be found here.
    Note: The Intel Matrix Storage Driver is updated with this package.
    Step 2: BIOS version
    If your BIOS version is older than those listed below, please update to the version listed.
    How to check your BIOS version:
    Turn off the system.
    Turn on the system.
    While the To interrupt normal startup, press the blue ThinkVantage button message is displayed at the lower-left area of the screen, press the F1 key.
    The
    BIOS Setup Utility menu will be displayed. If you have set a supervisor
    password, the BIOS Setup Utility menu appears after you enter the
    password.
    Check BIOS Version and Embedded Controller Version.
    Turn off the system.
    System BIOS versions:
    ThinkPad X61 or X61s - BIOS version 1.06 (7NET25WW)
    Please
    remember that these updates do not solve every possible system blue
    screen, but they do resolve several problems related to the Intel Turbo
    Memory driver.
    Tim Supples
    Lenovo Social Media
    Got a question? Don't PM me, post it on the forum!
    Lenovo Blogs
    X60 Tablet SXGA+ primary, Z61p fully loaded workhorse

    Dear Tim,
    First off, many thanks for the tips for resolving BSOD with Vista + Turbo Memory on X61.  I've been suffering from this BSOD for countless times since I bought in my X61 7673-CW9 in April 2008.
    Even prior to having the pleasure to visit this wonderful forum, I followed both steps as indicated, and updated my Intel Turbo Memory driver to 1.5.0.1013 and my BIOS to 7NETB4WW (2.14).  However, the BSOD recurrs.
    For the past two months, I've recovered my system to factory default settings using Rescue and Recovery for over twenty times, each time with the latest Intel Turbo Memory driver and BIOS.  Notwithstanding that, BSOD recurrs.
    During these painful experiences, I tried two options: 1) making my X61 up-to-date by using System Update and Windows Update (including Vista SP1 or excluding Vista SP1); 2) keeping my X61 the status as factory default (i.e. without updating through either System Update or Windows Update (the automatic/scheduled update function of both is turned off)).  In either case, BSOD recurrs.
    I'm 100% positive that the BSOD does not arise from any hardware or software/firmware I install.  I never install any hardware (e.g. RAM).  And, it is not caused by any software/firmware I install: the clear and unequivocal evidence is that at one time,I encountered BSOD while having restored back to factory setting and booting for the first time.
    I live in Taiwan, and I seldom heard this BSOD here.  All of my friends (as most of Taiwan residents) using X61 operate in Traditional Chinese environment, whereas I operate in English environment.  In Taiwan, when booting for the first time after purchase/recovery, the Windows Vista Business system provides for lanuage choice (Traditional Chinese or English), and, once chosen, the language cannot be altered later on (unless, of course, the system is restored back to factory default settings).
    My system specs are the same as the day I purchased it and are listed below (as I'm not sure if my machine type X61 7673-CW9 is applicable outside Taiwan):
    Processor: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.4GHz
    Memory: 1.00 G.B.
    System: Windows Vista Business (32-bit)
    Hard Drive: 160 G.B. @ 7,200 r.p.m.
    And, of course, with Intel Turbo Memory 1 G.B.
    I contacted the Lenovo support staff here in Taiwan for countless times, but they seem to be clueless.  I learned that some friends at this forum downgraded their OS back to Windows XP, but I chose not to.  The reason is simple: my purchase price for X61 7673-CW9 includes the Intel Turbo Memory, which cannot function under Windows XP (at least so far).
    Therefore, I just wish to share my experience here and perhaps I can get some advice from you and other friends here.  Any advice will be tremendously and enormously appreciated.
    Kevin Chen @ Taiwan

  • Batch List: How to capture clips inc info, from disk instead of tape

    We have a client's edit log on Excel, including reel no, in/out, scene, description, log note etc. Usually we import this batch list to FCP, then batch capture from DVCAM tapes, so all clips have all their info - great.
    In this case, the material is already digitised and the client has logged from DVDs burned with timecode from the digitised material being placed in FCP sequencecs with timecode generator filter.
    Is there a way to 'batch capture' clips from the digitised material, so that we keep all the client logging info, as we would if we were capturing from tape?

    Shane has got it right - we want to automatically build a sequence using that batch list. Or somehow have FCP make new clips or subclips from already captured footage... so if your verdict is right Shane, looks like we may have to go the manual route...
    although - just occurred to me - for each clip, I could go to the digitised source sequence, duplicate it, open copy in timeline, enter clip's in and out tc in the viewer - and that will give me a copy of each clip as a sequence - rename that sequence as per the clip, and we're done.
    But it's still of course more laborious than batch capture from tape; this is a concern going forward as we are switching to XDCAM EX, so of course the route to enable this client-edit-logging ( http://www.creationvideo.co.uk/info/timecode/ ) that we've always offered clients is no longer valid as the material is already online....
    Any suggestions still welcome!

  • Can't import an Avid batch list, keep getting "heading error:

    I'm trying to import a text file batch list into FCP HD from an Avid. I have the top line of the file with the headings NAME, DURATION, MEDIA START, MEDIA END, TAPE, and each subsequent line has the info deliniated with tabs. I thought this was the right way to do this. Anyone have any tips for importing this file?

    got a feeling your headings are wrong ... change "Tape" to "Reel" and drop "Duration"
    I would go with:
    Name Reel Media Start Media End
    cheers
    Andy
    Message was edited by: Andy Mees

  • Batch List Invalid Headings Error

    It was brought to my attention that manually created Batch List files will sometimes generate an error about "invalid headings". In these cases, the error was misleading. After some experimentation, it seems that files that use ASCII 10 as a line terminator (rather than 13) will generate this error.
    I would consider this a bug, but to anyone else experiencing the problem, I've created an AppleScript to "convert" the text, available here:
    http://www.surrealroad.com/research/archives/2008/final-cut-pro-batch-list-speci fication/

    thanks for sharing Jack

  • Error message "Data cannot be maintained for set type COMM_PR_PUR_1

    Hi
    While replicating the material master through R3AS I am getting an error for which the details to be checked in SMW01. In SMW01 when I selected the record for error details I am getting above error message.  How to resolve ? Pls guide me stepwise. For your information I has cleared SMQ1 in R3 & SMQ2 in SRM
    For curioisity next I selected all such error logs & deleted. It gave me one warning (some inconstinecies error) which I ignored. After that I checked SMQ1 of R3 & SMQ2 of SRM. No log
    But I observed a strange thing. Whatever material codes I am creating it is going straightway to SRM without running R3AS transaction. I checked R3AM1, selected the row and cancelled. But still going without any interferrance. Why ? How shall I stop this.
    Thanks

    Hello,
    >
    BNR wrote:
    > Hi
    > While replicating the material master through R3AS I am getting an error for which the details to be checked in SMW01. In SMW01 when I selected the record for error details I am getting above error message.  How to resolve ? Pls guide me stepwise. For your information I has cleared SMQ1 in R3 & SMQ2 in SRM
    >(...)
    Have a look at OSS note 1049693 - Data cannot be maintained for set type COMM_PR_PUR_1.
    Regards.
    Laurent.

  • Batch Listing Metadata for Offline Files

    Hello all -
    I'm using Premiere CC 2014 on OSX. I'm trying to do a batch list export of the metadata for a few dozen offline clips in my project.
    Here are the details:
    I need the filenames and video ins and outs (NOT the media start and end) for all of my media files to put in a spreadsheet for archival purposes. I don't actually have access to the media itself - just to the project file.
    When I do a batch export by highlighting all of the files and going to File>Export>Batch List, the only three columns that export are the filename and the media start and end. I'm hoping to get an export with all of the columns of metadata so that I can narrow it down to just the data I need. Basically, this is the info that I want to be able to put in a spreadsheet:
    And this is what I'm getting when I do the batch list export:
    Does anyone know if this is possible?
    Thanks!

    Welcome to Apple Discussions:
    You might consider
    mdls
    in a terminal.
    If this is a server-specific issue, you might post in the server forum here:
    http://discussions.apple.com/category.jspa?categoryID=236

Maybe you are looking for