Errors defining the destination for SQLAssembler inside data-management-config.xml

Hello,
I am following the LCDS ES sample at
http://localhost:8700/samples/#sqlassembler
for defining a destination inside data-management-config.xml,
there you can define SQL
statements that can be referred to from MXML
I am having the following error:
'Error in SQL for 'fill' in destination 'sql-product'.
Matching pair of # tokens not found'
And the statement it is referring to, from within the
data-management-config.xml file is:
<name>getAllForServer</name>
<sql>SELECT * FROM MYTABLE
WHERE SERVER_ID = #SERVER_ID#
</sql>
I do not understand the # syntax, and how can it be used
universally? for example, setting the value of LIMIT, or variables
in WHERE statements

Thanks a bunch, that was it. Any ideas where I can find DTSs
or Schemas for the FDS config files?
-Robert

Similar Messages

DTD for data-management-config.xml

Is the data-management-config.xml file structure somewhere
explained? I wonder why isn't this file (as well as all the other
FDS config files) validated against a DTD or XML schema?
I'm trying to configure multiple parameters for a destination
server method, without success so far. The following attempts have
all failed
<server>
<fill-method>
<name>getFolderContent</name>
<params>java.lang.String;boolean</params>
</fill-method>
</server>
<server>
<fill-method>
<name>getFolderContent</name>
<params>java.lang.String, boolean</params>
</fill-method>
</server>
<server>
<fill-method>
<name>getFolderContent</name>
<params>java.lang.String</params>
<params>boolean</params>
</fill-method>
</server>
I want to pass in a Java String and a boolean (the
primitive). What's the correct syntax? Thank you.

Thanks a bunch, that was it. Any ideas where I can find DTSs
or Schemas for the FDS config files?
-Robert

Data-management-config.xml issue

My question is if i can have multiple
data-management-config.xml files? for a better administration i am
separating it into multiple files but when trying to access a
destination it fails so i assume this is not possible, is that
right?

Ok imagine i have 30 destinations in one
data-management-config.xml, that's a lot of destinations, so when i
want to modify something in that file i need to look all over it to
find what i want, so instead of that it would be nice to being able
to have 3 data-management-config.xml files, with 10 destinations on
each, that way it would be easier to manage and update them.
This is requirement of the QA department, they don't want to
review a gigantic data-management-config.xml, they would prefer to
manage 3 or 4 files instead of one.
So the question is: IS this possible? or do i necessarily
need to use one and just one data-management-config.xml?

Help define the requirements for an Oracle Spatial management tool

Hi,
We are developing a tool that, we hope, will be indispensable for all Oracle Spatial and Locator dbas/users. We've released version 1.0, but we need your help to define the requirements for the next version.
What features would you like to have in a management tool for your spatial databases?
The features we've got so far:
1. Viewing of vector data in a map + attributes
2. Loading from shapefiles
3. Exporting to shapefiles
4. Validating metadata, indexes and spatial data.
We are adding editing of vectors in the next version - basic stuff for add, update and delete.
But there must be a lot more. What do you find difficult to do in Oracle Spatial/Locator? What would you like in a tool such as this?
Any feedback either to myself or the forum is much appreciated.
cheers,
Andrew
[email protected]
PS If you like to have a look at what we have done so far, go to http://www.geometryit.com/products/spatialConsole.php

Andrew knows what I have asked for but for others to think about and to start
the ball rolling, here's what they are:
1. Ability to enter own SQL commands but with PARAMETERS for attributes
and shapes as in the following examples:
SELECT ...
FROM my_spatial_table a
WHERE a.ATTRIBUTE = :attr
AND MDSYS.SDO_RELATE(a.shape,:polygon,'mask=anyinteract') = 'TRUE'
When executed the attribute value is asked for via a input box (data type?)
and the user is asked to define the SDO_GEOMETRY for the :polgygon parameter via mouse clicks on the screen.
Similarly, this would work for INSERT, UPDATE and DELETE...
INSERT INTO my_spatial_table (shape) values(:polygon)
The data type of an attribute parameter could be determined in two ways:
a) By querying the Oracle catalog;
b) By using a "PARAMETERS" command before the query as follows
PARAMETERS name type [(size)] [, name type [(size)] ...]
The PARAMETERS declaration has these parts:
name     The name of the parameter.
type     The type of the parameter.
size     The size of the parameter in characters or bytes.
2. When executing an SQL SELECT statement I would like the tool
to suggest the HINTS that are needed to improve performance.
3. Following on from 2, I would like to Tick an option that would return the
EXPLAIN PLAN that the query optimizer used when executing my query.
4. The tool has to support ALL Oracle's spatial vector data types.
5. It would be nice to be able to work with GeoRasters. Since Spatial Console
imports/exports shapefiles why not the same for rasters. However, the problem
with supporting foreign data formats is WHERE DO YOU STOP!!!!!
6. You could allow for the styling of the Spatial Console to be stored in the MapViewer catalogs or use the MapViewer catalogs when styling an Sdo_Geometry if it exists (I note that your tool extracts the SDO_METADATA
why not the MapViewer metadata as well)?
regards
S.

Link To Download the documentation for Oracle Master Data Management

Hi,
I require to make a hierarchy for Processes in Master Data management.
Where do you suggest will I get the user guides for all the Softwares in MDM.?
Thanks,
Aeron

Looks like product related question - not a question about the download service which is the topic of this forum.
MDM suite has a range of products so you need to be more specific when looking.
You might want to post in a relevant forum category, if one exists for your specific product, such as:
https://forums.oracle.com/forums/category.jspa?categoryID=157
Please do not hijack someone's thread ({thread:id=2354806}) - instead start a new one
Likely place to look for download (which should include documentation) in this case is edelivery.oracle.com.
Some docs are also available from:
http://docs.oracle.com/cd/E18727_01/nav/scm.htm
Edit:
some additions to docs and other thread
Edited by: orafad on Mar 21, 2012 11:30 AM
Edited by: orafad on Mar 21, 2012 11:32 AM
Edited by: orafad on Mar 21, 2012 11:34 AM

HT1766 I have made the C drive on my computer very small, with the intention that all data would be stored on the D partition. Can I change the destination for my iPad backup to the D drive?

I have made the C drive on my computer very small and try to put all the data on the D partition. Can I change the destination for my iPad backup to the D drive?

See if this post from turingtest2 helps : https://discussions.apple.com/message/24351688
If not then you might be better off asking in the iTunes For Windows forum, you may be more likely to get better help there.

What is the need for setting property data inside the JMSMesage

Hi
Could anybody please let me know
*What is the need for setting property data inside the JMSMesage??
For example i have a seen a similar example as shown ??
I have seen a
Message.setStringProperty("Sport","Basketball");
and also please tell me how can the MDB recievies this property data ??
Thanks in advance .

raviprivate wrote:
Could anybody please let me know
*What is the need for setting property data inside the JMSMesage??
For example i have a seen a similar example as shown ??
I have seen a
Message.setStringProperty("Sport","Basketball"); Look at the detail JMS documentation on [Message Properties|http://java.sun.com/j2ee/sdk_1.3/techdocs/api/javax/jms/Message.html] .
>
and also please tell me how can the MDB recievies this property data ?? MDB onMessage method argument is the Message object and if you look at the documentation, Message interface has getter methods to retrieve the properties.

Message 'Please check the destinations for parallel MRP'.

Hi,
While I was running MD01, I encountered the following message 'Please check the destinations for parallel MRP'.
Please advise.
Thank you in advance.

Hi,
In MD01 initial screen indiacate parallel processing indicator.
In SPRO> PRODUCTION > MRP >MASTER DATA > Define parallel processing in MRP. In that give your server name.
Regards,
Dharma

Error in the configuration for sap logon tickets

Hi Forum,
I use Tcode crmd_order_bp to see the BP cockpit and the error message displays as
<b>Error in the configuration for SAP logon tickets</b>
But if I click "Yes", system displays cockpit.
How can I avoid this error.
Thanks in advance
Regards
Shridhar

You will still need to configure SSO (either by logon ticket or username/password). The data source access is done using the username/password configured in the UM Config dialog box.
I can see where you're coming from with your thinking, however logon-ticket-based SSO is probably the best approach.
Cheers,
Darren.

Error in the instructions for performing a silent install

There's an error in the instructions for performing a silent install of Photoshop Elements:
http://helpx.adobe.com/photoshop-elements/kb/silent-install-instructions-photoshop-element s-1.html
In step 9, the instructions say to use the following command line:
start /wait "path to Setup.exe" /UL%LangCode% /V“SERIALNUMBER=%AOO volume license serial number%"
The correct command line, however, is this:
start /wait "path to Setup.exe" /UL%LangCode% /V"SERIALNUMBER=%AOO volume license serial number%"
See the difference? Look closely at the character after the /V. In the instructions on the website, they put in a "curly quote" character. This obviously needs to be a straight quote.
Interestingly enough, the erroneous command line from the web site will actually work just fine as posted if all you are passing in the /V is the serial number. If, however, you wanted to add a "NODESKTOPICON=1" to disable the creation of a desktop shortcut, for example:
start /wait "path to Setup.exe" /UL%LangCode% /V“SERIALNUMBER=%AOO volume license serial number% NODESKTOPICON=1"
then it fails to run silently.
I post this in the hopes that Adobe will fix the typo in their instructions and save other admins the hours of grief I've been put through today trying to get this working.

Check the response file where you define the SGA memory size for the new database.
You can also choose not to create the database at the installation and do it afterwards, making a specific response file for it. (I'd recommend specially this option. like that you can separate possible installation errors with the ones on the DB creation process).
Good luck.
Regards,
Enric Moya

Cannot open aperture-There was an error opening the database for the library "/Volumes/TKR HITACHI /HI12.aplibrary".

When I try to open Aperture 3- I get this message : There was an error opening the database for the library...(name of library).
The last time I tried to open the library I got a window requesting a conflict in library data. It ask if I wanted to resolve it. So I pushed the repair button.
Thanks in advance for your help !!

William,
Thanks so much for your reply.
When first hooked up I reformatted the external as Mac OS Extended Journaled within Disk Utility.
I am not sure what HFS+ means. Can you help me there ?
Tom Rodgers

Oracle Error occured, while checking for Already Committed data

Hi,
In my 1 day old workspace I see more than 3000 errors logged in the owb_error_log_table with text as shown below , can someone from Oracle please advise what the problem seems to be ?
Oracle Error occured, while checking for Already Committed data : 76291.DBObject.TABLE_1.2.en_GB
Oracle Error occured, while checking for Already Committed data : 76291.DBObject.TABLE_1.1.en_GB
Oracle Error occured, while checking for Already Committed data : 42483.PlatformConfiguration.ORACLE.1.en_GB
Oracle Error occured, while checking for Already Committed data : 42483.PlatformConfiguration.ORACLE.2.en_GB
There are many more examples of other errors as well. Google returns nothing for these error....am I the first one to face these errors. We are using 11gRelease2 on RHEL.
They all have a error text of ORA-01403: no data found
tks in advance.

I haven't been able to pin it down to a specific action that causes these errors. I have been having various other problems when importing tables ...the screen just freezes and nothing happens. When I queried this table from sql developer to check if I can spot anything and I found these errors.
The screen freezes when I add a new oracle location - the test works fine - but when I click OK to the add oracle location screen it just freezes and nothing happens.

HT1218 I am receiving the following error on my time machine, does anyone know what it means? Error message = The backup disk image "/Volumes/Data/Richard's MacBook Pro.sparsebundle" is already in use.

I am receiving the following error on my time machine, does anyone know what it means? Error message = The backup disk image “/Volumes/Data/Richard’s MacBook Pro.sparsebundle” is already in use.

Please look over the right of this page under the heading of More Like This for multiple answers and solutions for this bug.

How to define the texts for UI element Dropdownlistbykey?

Hi everyone,
I don't know how to define the texts for Dropdownlistbykey. It seems that Dropdownlistbykey has an attribute "selected key", but where can I bind the texts I want to display when user clicks the downwards
arrow?
Thanks in advance.

hi,
you can use this code :
method WDDOINIT .
DATA : node_info TYPE REF TO if_wd_context_node_info,
         value1 TYPE wdy_key_value,
         set TYPE wdy_key_value_table,
         k1 type string value 'M',
         v1 type string value 'MAGO',
         k2 type string value 'S',
         v2 type string value 'Saurav'.
value1-key = k1.
value1-value = v1.
APPEND value1 to set.
value1-key = k2.
value1-value = v2.
   APPEND value1 to set.
node_info = wd_context->get_node_info( ).
node_info = node_info->get_child_node('FOR_DROP').
node_info->set_attribute_value_set( name = 'DROP_KEY'   value_set = set ).
I hope it helps.
Thanx.

TS2518 Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library it says There was an error opening the database for the

Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library it says There was an error opening the database for the library. I have tried every thing. I updated the other libr but now it will not open the main to update. What do I do?

Try starting Aperture with the command and option keys held down. You'll get 3 options.
Try each, starting at the top, in order, checking after each to see if it fixes the issue.

Errors defining the destination for SQLAssembler inside data-management-config.xml

Similar Messages

Maybe you are looking for