Errors: error in transportprofil (param missing,unknown)
Hi,
when i typed stms_import i got the error message
tp_reported_error
and in description showing
Transport control program tp ended with error code 0208
Errors: error in transportprofil (param missing,unknown)
error in
eoutsource\sapmnt\trans\bin\tp_domain_nsp
please help me solve this problem.
Dear,
i to i have faced the same problem for this you have to upgrade your TP,
R3TRANS, DBSL PATCH.
Get the latest one for ur dependent kernel version depends on your database and kernel version very important
from Service Market place..
Warm Regards.
Mohammed Hassan Naveed
Associate SAP Basis Consultant
Mumbai
Similar Messages
-
ERROR OGG-00868 Error code 1291, error message: ORA-01291: missing logfile
OGG Version 12.1.2.1.0 OGGCORE_12.1.2.1.
DB : 11.2.0.4.3
I am getting below error.
2014-12-31 09:53:09 ERROR OGG-00868 Error code 1291, error message: ORA-01291: missing logfile
(Missing Log File <unknown>. Read Position SCN: 2585.802983323 (11103293443483)).
Our solution uses ADG and OGG
We have source and target where ADG was setup . We later broke ADG setup and made Oracle DB's in source and target into standalone.
As part of our solution during our deployment window ,we would break ADG i.e we would make both the source and target as independent DB’s with PRIMARY Read /Write mode.
-Take Guaranteed restore point on Source DB so that we can flash back at later stage(so of now we have not executed flash back command)
-Once ADG config is disabled we will start the OGG extract which is already configured before =We are at this stage where we are hit with errors and extract is not starting .Hi ,
The error shows it is waiting for the Logfile. The Integrated extract mainly needs of the availability of two things.
1. Archivelogs.
2. Trail Files.
Both should be retained to the needed / required level.
Please execute the below query and check the status of the Extract / Capture process.
The below query displays the information of each capture process in a database.,
COLUMN CAPTURE_NAME HEADING 'Capture|Name' FORMAT A7
COLUMN PROCESS_NAME HEADING 'Capture|Process|Number' FORMAT A7
COLUMN SID HEADING 'Session|ID' FORMAT 9999
COLUMN SERIAL# HEADING 'Session|Serial|Number' FORMAT 9999
COLUMN STATE HEADING 'State' FORMAT A20
COLUMN TOTAL_MESSAGES_CAPTURED HEADING 'Redo|Entries|Evaluated|In Detail' FORMAT 9999999
COLUMN TOTAL_MESSAGES_ENQUEUED HEADING 'Total|LCRs|Enqueued' FORMAT 9999999999
SELECT c.CAPTURE_NAME,
SUBSTR(s.PROGRAM,INSTR(s.PROGRAM,'(')+1,4) PROCESS_NAME,
c.SID,
c.SERIAL#,
c.STATE,
c.TOTAL_MESSAGES_CAPTURED,
c.TOTAL_MESSAGES_ENQUEUED
FROM V$STREAMS_CAPTURE c, V$SESSION s
WHERE c.SID = s.SID AND
c.SERIAL# = s.SERIAL#;
Also run this query to check, if the capture is waiting for which logfile.,
COLUMN CONSUMER_NAME HEADING 'Capture|Process|Name' FORMAT A15
COLUMN SOURCE_DATABASE HEADING 'Source|Database' FORMAT A10
COLUMN SEQUENCE# HEADING 'Sequence|Number' FORMAT 99999
COLUMN NAME HEADING 'Required|Archived Redo Log|File Name' FORMAT A40
SELECT r.CONSUMER_NAME,
r.SOURCE_DATABASE,
r.SEQUENCE#,
r.NAME
FROM DBA_REGISTERED_ARCHIVED_LOG r, DBA_CAPTURE c
WHERE r.CONSUMER_NAME = c.CAPTURE_NAME AND
r.NEXT_SCN >= c.REQUIRED_CHECKPOINT_SCN;
The above query clearly shows for which logfile the Extract / Capture process is waiting. Check if that logfile is available in your system.
Regards,
Veera -
When I open iTunes I get an error message "MSVCR80.DLL missing". I downloaded this .dll and installed in C:\Windows|System32. I then scanned my computer to fix registry errors.I uninstalled iTunes and reinstalled and got the following error message "Apple Mobile Device failed to start".
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
Crystal Report: ERROR - Some parameters are missing values
mine report it possesses a single parameter ....
this is the example of like tries of to change the value set up in the report...
ERROR: Some parameters are missing values
thanks help...
EXAMPLE:
<%@ page import="com.crystaldecisions.report.web.viewer.*"%>
<%@ page import="com.crystaldecisions.report.htmlrender.*"%>
<%@ page import="com.crystaldecisions.reports.reportengineinterface.*"%>
<%@ page import="com.crystaldecisions.sdk.occa.report.reportsource.*"%>
<%@ page import="com.crystaldecisions.sdk.occa.report.data.*"%>
<%@ page import="com.crystaldecisions.common.keycode.*"%>
<%@ page import="java.util.*"%>
<%
try {
IReportSourceFactory2 rptSrcFactory = new JPEReportSourceFactory();
String report = "report/ReportParametro1.rpt";
IReportSource reportSource = (IReportSource) rptSrcFactory.createReportSource(report,
request.getLocale());
Fields fields = new Fields();
ParameterField pfield1 = new ParameterField();
Values vals1 = new Values();
ParameterFieldDiscreteValue pfieldDV1 = new ParameterFieldDiscreteValue();
pfield1.setName("CICCIA");
pfieldDV1.setValue("SELECT descrizione, validoDa, validoA FROM tariffari");
pfieldDV1.setDescription("Query Dinamica....");
vals1.add(pfieldDV1);
pfield1.setCurrentValues(vals1);
fields.add(pfield1);
CrystalReportViewer viewer = new CrystalReportViewer();
viewer.setReportSource(reportSource);
// layout
viewer.setOwnPage(true);
viewer.setBestFitPage(true);
viewer.setHasLogo(false);
viewer.setHasRefreshButton(true);
// group navigation
viewer.setHasToggleGroupTreeButton(false);
viewer.setDisplayGroupTree(false);
// page navigation:
viewer.setHasGotoPageButton(false);
// print/export
viewer.setHasExportButton(true);
//viewer.setPrintMode(CrPrintMode.PDF);
viewer.setPrintMode(CrPrintMode.ACTIVEX);
viewer.setIgnoreViewStateOnLoad(true);
viewer.setParameterFields(fields);
viewer.setEnableParameterPrompt(false);
viewer.refresh();
viewer.processHttpRequest(request, response, getServletConfig().getServletContext(),
out);
viewer.dispose();
}catch(Exception e){
out.println("Errore " + e.getMessage());
%>
I am facing the same problem. After selecting an export option (PDF/RTF), the same error message is coming up.
Also, what needs to be done for displaying export option of EXCEL?
Thanks,
Farzal -
Hi All,
I am getting error "Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 500"
in one of my Test Environment when trying to run the SSRS 2012 report from report manager.
Any clue why it is happening.
Thanks Shiven:) If Answer is Helpful, Please VoteHi All,
Upon investigation found that there was no space (0 Byte is available) in E drive where underlying SQL DB is residing.
Once I cleared the space, report started working and above error was not displaying.
Thanks Shiven:) If Answer is Helpful, Please Vote -
Error OTF end command // missing in OTF dat
Hi
I am converting a smartform of a PO into a PDF. when i am using the option of pint immediately in message option of PO. I am getting this error OTF end command // missing in OTF dat . when i am using option 3 which in not print immediately. i am able to convert it into pdf file and save in my local folder. please advice.when you click the message button while creating a PO. it will take to next page where you add your output type that is output, partner etc.. after you add and click on further data button there you will have option for dispatching here when you add slect option 4 whihc is print immediately. then i am getting the error. if i am using the other options i am able to down load into pdf but not able to see print preview. please advice
-
Error:G/L account missing when saving Sales order
Hi Guys,
I will appreciate your input on this.
Whenever I try to save a Standard order for a particular material I get the error"G/L account missing. I have checked all the Account assigment settings and they are correct.
I faced this issue while creating an order for downpayments.This error occurs when we use the material of the kind "make to order".
RegardsHi Pvarinder,
First please check the customer account assignment group at your sales order header level and material account assignment group at your item level.
If they are ok then go to Environment->Analysis->Account determination
As you said the entries are ok in VKOA, so my guess is I think you have some condition type which is not getting the right G/L account.
Please check and revert with your findings.
Regards,
MT -
Error Caller 70" is missing while loading master data
Hi All,
I am facing a Problem while loading master data getting error like "Error Caller 70" is missing" ,there are 4 data packages and in that except one all other with status green .1 data pakage is showing with red color, its update till only PSA .
Please help me out to solving this issue .
Thanks in Advance
SandhyaHi,
check the below links
caller 70
Re: Caller 70 error
caller 70
Hope this helps -
Can someone please offer some suggestions why I am getting an error message that says "an unknown error has occured" when I try to download or update my apps in the app store?
Thanks!
disregard! i noticed someone else's post about signing out of the app store and signing in again and it worked.....Hi ...
Try here > Mac App Store: "An unknown error occurred (100)" when purchasing
If that doesn't help, drag the App Store icon straight up off your Dock so it goes, "poof".
Now drag the App Store icon from your Applications folder to the Dock. Try updating your apps. -
When starting InDesignCS2 received new error message -- InDesign is missing required system fonts or
We are not able to start Indesign CS2 without getting the error message: <<InDesign is missing required system fonts or CMap files. Please reinstall InDesign.>> This is on WinXP.<br /><br />Recently I installed Creative Suite CS4. It took almost a day to install. The installation kept on stopping. Each time we were able to install one more program. After checking all of the programs we discovered that Firefox would not start due to a possible font error. After reading many posts I decided to uninstall a lot of fonts since I did not know which one was the culprit. <br /><br />However now I am missing a font (at least I hope that this is caused by a missing font and not anything else) that should be there and I don't know which one it should be. I did uninstall a <lot> of fonts and don't remember which ones.<br /><br />WE did uninstall all CS2 programs and then reinstalled only the necessary three. However that did not make any difference.<br /><br />Any ideas and suggestions would be welcome<br />Thanks<br />Pia Pehtla
A forum search for "missing required fonts" brings up this thread which should solve your problem:
http://www.adobeforums.com/webx?128@@.3bbdb0a7
Peter -
I'm trying to download the new version of itunes. durig the install i get a message that I need to verify that I have sufficient privilege. Then I get a message of a Windows error 126 and a missing file MSVCR 80.dll. I've tried everything on the support site and nothing works.
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
I installed iTunes update on my pc running windows vista and now it will not open. Error message MSVCR80.dll missing???
First try updating to iTunes 11.1.5.5, using an installer downloaded from the Apple website:
http://www.apple.com/itunes/download/
If you still get the errors after that, try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
after getting the latest update I recieve an error about MSVCR80.dll Missing, has anyone found the solution as uninstalling and then installing doesnt seem to work
Doublechecking. Have you tried the following user tip?
Troubleshooting issues with iTunes for Windows updates -
Convert Pricing Error : Mandatory condition PR00 missing as a red error
HI GURUS,
May I know if I can make the error "Pricing error : Mandatory condition PR00 missing" as a no-go red error? We would not want to be able to save the sales order, then create the outbound delivery and only to reverse them after not being able to post the outbound delivery. Making it a no-go error will help us save time and effort if we commit mistakes in the sales order encoding.
Thanks a lot for your prompt reply.
Regrds,
FrancesHi
Rahul
The error is becose of two reason
1. Check have u entered plant or not? If yes then
2. Mintain PR00 condition thr. Tcode VK11 and do the update pricing.
This two are the possibilities please check and try.
Hope this will help you.
Thx. -
Dear experts,
can anybody give me a hint about the error mentioned above?
I found the SAP Note 1049778 but this is not applicable. Yes, we do have this error in some workprocess trace-files and it seems to be produced during printing SAPScript. But it has nothing to do with special print options. I'm now looking for other ideas about the real cause of error.
Regards,
Hans-MartinWell, here are the relevant lines of the trace dev_w1 of the related work process:
S
S Tue Aug 12 09:46:26 2008
S *** ERROR => C call error 084(SPOC): area POSSUTIL unknown [rspoabap.c 639]
S
S Tue Aug 12 09:46:27 2008
S *** ERROR => C call error 084(SPOC): area POSSUTIL unknown [rspoabap.c 639]
S
S Tue Aug 12 09:46:33 2008
S *** ERROR => C call error 084(SPOC): area POSSUTIL unknown [rspoabap.c 639]
S
S Tue Aug 12 09:46:37 2008
S *** ERROR => C call error 084(SPOC): area POSSUTIL unknown [rspoabap.c 639]
S
S Tue Aug 12 09:46:39 2008
S *** ERROR => C call error 084(SPOC): area POSSUTIL unknown [rspoabap.c 639]
S
S Tue Aug 12 09:46:44 2008
S *** ERROR => C call error 084(SPOC): area POSSUTIL unknown [rspoabap.c 639]
S
S Tue Aug 12 09:46:57 2008
S *** ERROR => C call error 084(SPOC): area POSSUTIL unknown [rspoabap.c 639]
S
S Tue Aug 12 09:46:58 2008
S *** ERROR => C call error 084(SPOC): area POSSUTIL unknown [rspoabap.c 639]
S *** ERROR => C call error 084(SPOC): area POSSUTIL unknown [rspoabap.c 639]
S
S Tue Aug 12 09:47:00 2008
S *** ERROR => C call error 084(SPOC): area POSSUTIL unknown [rspoabap.c 639]
Hope this helps.
Regards The specified item was not found.
Maybe you are looking for
-
How to delete from Nokia C5-03?
How to do delete music and other unnessary things from Nokia C5-03? I have not found delete or remove area. Help me.
-
Why does opening iTunes cause my screen resolution to change automatically?
Recently opening iTunes started automatically changing my screen resolution. When I close iTunes the screen resolution reverts back to normal. Does anyone now why this is happening or how I can make it stop? I am also unable to view my music libra
-
Is there more than one "Previous recipients" file?
Ancient addresses long deleted from my address book continue to populate emails. I have done the Window --> Previous recipients thing. (I really have!) The ancient addresses are not there to delete! I'm wondering if there is more than one "Previous r
-
Can I use my iPhone to make new playlists, take songs off my iphone, add songs on my iphone, using just the iphone with the new IOS5? or it that part of photography still managed by a physical cord connection with syncing and checking which photos I
-
Creation of new Archive Object
HI All, I am currently having a requirement, where I need to create a new archive object a copy of MM_EBAN, can anybody let me know, how to copy this... If any body has worked priorly will help me a lot... Thanks in advance... Regards, Brij