Error:G/L account missing when saving Sales order

Hi Guys,
I will appreciate your input on this.
Whenever I try to save a Standard order for a particular material I get the error"G/L account missing. I have checked all the Account assigment settings and they are correct.
I faced this issue while creating an order for downpayments.This error occurs when we use the material of the kind "make to order".
Regards

Hi Pvarinder,
First please check the customer account assignment group at your sales order header level and material account assignment group at your item level.
If they are ok then go to Environment->Analysis->Account determination
As you said the entries are ok in VKOA, so my guess is I think you have some condition type which is not getting the right G/L account.
Please check and revert with your findings.
Regards,
MT

Similar Messages

  • I need a Badi that is triggered when saving Sales order in both Va01 and Va

    Hi
    I need a Badi that is triggered when saving Sales order in both Va01 and Va02
    I tried with the following BADI's
    BADI : BADI_SD_SALES
    Implementation : /BEV1/SR_SALES_ORD_1
    Method SAVE_DOCUMENT
    Now when i want to put my peice of code in this (SAVE_DOCUMENT) method.
    It is asking for Access key. Which i do not have.
    Should i create a implementation and then create a method and then put my code there?
    Anybody plz help.

    You will probably not find a BADI to suit your needs.  However if you look at include program MV45AFZZ you should find two subroutines:  USEREXIT_SAVE_DOCUMENT_PREPARE and USEREXIT_SAVE_DOCUMENT.  You can put the code you need directly into these subroutines.  If these have not been changed yet on your system, you will need an access key to make these changes.
    Please read the documentation in the header of the subroutines for furtner information on when they are called.
    Best Regards,
    Chris H.

  • Partner Function "Vendor" missing when the sales order is replicated to ECC

    Hi Gurus,
    We are facing a problem on replication of functions partners between
    sales order of CRM and ECC.
    We have downloaded vendors (partners of table LFA1) from ECC to CRM
    following note 883162 and this replication was ok!
    We have mapped all partner functions from ECC to CRM and from  CRM to
    ECC for distribution of partners between systems.
    We must include a vendor using partner function '0000092 - Carrier' on
    our sales order, which is transferred to ECC. However, when the sales
    order is transfered to ECC, the vendor (which was included on CRM) is
    missing.
    When the sales order is created on ECC and the partner (type carrier)
    is included in,  the order arrives on CRM missing only the partner
    number, because the partner function is there.
    How to fix this problem?
    Best Regards,
    Nivea Faria

    Hi,
    See this Note : 975195
    Hope this helps.
    Best Regards
    Shiven

  • Direct production order when saving sales order.

    Hi,
    How to create a production order from sales order.ie. When a sales order is saved production order automatically created.
    Thaks and regards
    Harish

    Hi
    For the product that you need to have the production order once the sales order is saved
    Maintain the planning strategy     82     Assembly processing w. production orders  in material master / mrp 3 view
    So once the sales order is created, system automatically do the bom explotion and availability check, routing in background and create the Prodcution order.
    so in Md04, you can see the production order for you sales order qty.

  • When saving sales order Error determining local currency: ER type 'M' date

    Hi experts
    we have created new sales area for intercompany billing process. we are doing testing for this.
    Update was terminated    
    after saviing sales order express document update was terminated received from author
    sales order Error Info...   M2 802: Error determining local currency: ER type 'M' date 02.08.2011.
    i need your input
    thanks

    Dear Manoj Verma,
    Check the pricing date of the sales order.
    Check the valid from date for the currency types/exchange rate type M in OB08
    Now check whether the pricing date in sales order is before the valid from date in OB08.
    If so , make the valid from date in OB08  as the pricing date in sales order in OB08 and then save.
    Thanks & Regards,
    Hegal K Charles

  • Update  Customer's Credit Exposure amount when saving sales order

    Hi All,
    My requirement is to update the Credit Exposure amount(KNKK-SKFOR) of the Payer based on the open items for the payer when saving a sales order.
    I checked the UserExit USER_CREDIT_CHECK2 however this is not working when I am trying to update the KNKK-SKFOR value in this userexit.
    Please help.
    Thanks.

    Dear Debashish
    As per my understanding, this is because the credit limit check is always applicable at 2 levels only i.e. Sales Order and Delivery.
    u r talking about Open Billing Doc and Open Items, but this is also covered within Open Sales Orders and Deliveries, isn't it?
    Hope this will help u.

  • User exit not active when saving sales orders

    while creating a sales order (VA01)   i need  to update  the  storage location  based on  division . for this the badis  and user exits  are not triggering   while creating a sales order for the above requirement
    any solution........
    <removed by moderator>
    thanks in advance..
    <Subject edited. Please read the [Rules of Engagement|https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]>
    Edited by: Mike Pokraka on Aug 7, 2008 8:38 AM

    JVP,
    MV45AFZZ this is the include which is trigger while creating SO.
    use  FORM USEREXIT_FIELD_MODIFICATION   to write code.
    your code look like if sy-tcode = 'VA01'.
    update field.
    endif.
    Amit.

  • Run Time Error on Saving Sales Order

    Hello,
    We are facing problem when saving sales order. When order is created and save button is pressed, it saves sales order and gives Order  Number. But while saving the order during update it gives dump due to Data duplication in VBFA while inserting data to VBFA table
    Looking at ST22 log this error is in form VBFA_BEARBEATEN
    Kindly guide.
    Thanx in advance.
    Regards

    Check the Sales Order Number Range.
    It seems either the Number Range is exhausted (completed) or a document with same number is already created in system in past...
    Hope this helps,
    Thanks,
    Jignesh Mehta

  • GL Account Missing While Saving The  Sales document

    Dear Frends
    While POstin the sales document,i am getting error like Gl account missing.This is related to Service Contracts.even i have checked the account determination in VKOA(FI-SD)..
    Kindly give me the solution
    Regards
    Sap Guru
    kischowdary

    Hi,
    Even though the determination is maintained in VKOA check in the determnation analysis if all the keys on which the you have maintained the determination;are recognised by the system.
    If any one particular field is missing then the GL account will not be determined.
    Reward points if useful
    Regards,
    Amrish Purohit

  • Error while saving sales order

    Hi I am encountering below error message while saving sales order:
    Warehouse
    Specify export data in material master
    Then I go to material master to check foreign trade export tab, and I had maintained commodity code export group, country of origin and region of origin, what did I miss? Help.

    Hi,
    Check whether you have activated legal control data for the Sales Order type configuration in Foreign Trade.
    If the Order type is activated then the following error message can pop up unless you maintain in material master.
    See whether export legal control data is activated or not for the order type.
    In IMG Sales and Distribution>Foreign trade>Legal control section
    Regards,
    Saju.S

  • Error message when updating Sales Orders

    Hi Experts
    Following an issue over the weekend when I was forced to perform a  hard reset we are now experiencing error message when trying to update some sales orders. 
    This entry already exists in the following tables " ADO1 (ODBC - 2035) [Message 131 - 183]
    it is not happening on all orders - i think only ones which were on the system prior to the reset.
    We also use webtools and the B1SyncService seems to be causing the SAP B1 system to become unusable - following each attempt to sync there is an error in the event log:
    Event Type:     Error
    Event Source:     B1SynchService
    Event Category:     None
    Event ID:     0
    Date:          29/06/2009
    Time:          13:42:38
    User:          N/A
    Computer:     SQL01
    Description:
    A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.)
       at netpoint.api.data.DataFunctions.ExecuteScalar(String SQL, String connectionstring)
       at NetPoint.SynchSBO.SBOObjects.SBOUtility.SetCompany(Company TheCompany, SecurityTicket securityTicket)
       at NetPoint.SynchSBO.Synch.SetCompany()
       at NetPoint.SynchSBO.Synch..ctor(SecurityTicket ticket)
       at NetPoint.SynchSBO.Synch..ctor(SecurityTicket ticket, Int32 pricinginterval)
       at NetPoint.SynchService.NPSynchService.Synch(String profile, Mutex mutex)
       at NetPoint.SynchService.NPSynchService.Main(String[] args)
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    For now I have had to stop the SyncService to prevent B1 from becoming unusable (users are unable to start any AR module), but even after I have stopped the syncservice I still have the error when updating sales orders.
    Regards
    Jon

    Dear Johnny,
    the error reported sounds like a DB Corruption. I would advise you to log a message to SAP Support including all the details in order to obtain the error message. It is also a good idea and it will speed up the process if you include some print screens showing exactly the error message.
    Hope my reply helps you to solve the issue.
    Regards,
    Wesley Honorato

  • Trigger an Idoc when a sale order is been opened in VA02 & saved

    Hi Experts
         I have a requirement to trigger an Idoc when a sale order is been opened in VA02 transaction and saved.
    Now that I have attained the same through Message Control Settings and Nace out put type settings with Multiple Issuing.
    Here in the Idoc will be triggered when the user makes any changes in the order based on the NAST table entry.
    Now my requirement is that the Idoc has to be processed even if there is no changes made to the document when the user opens the sale order and clicks save.
    This is the process been carried out to re-process the Idoc.
    Now that the Idoc is triggered using the path ---> menu - extras -output - header- edit & save.
    Now that the user need to process the Idoc by just opening the order  in VA02 and  click save.
    How can this be attained ? is there any configuration for it ?
    Or is it possible to handle the same in any of the user exit ?
    the problem is the user exit save gets triggered only when there is any change in the document else it throws a msg " No changes made"

    Hi Niraj
       Thanks for your Response.
    Now that the output control works fine when there is any change made to the document.
    Now that i need to configure such a way that the output control triggers even if there is no change to the document and save   button is clicked.
    Can U please elaborate how do i make settings in VOFM-> Output Control ?
    Thanks
    Sathish

  • RE; when a sales order is posted error in Md04

    When a sales order posted for 10 nos, the order shown in stock requirement list it is exhibiting the order for 120.Basically it is the integration problem despite that sd people claim it is the setting problem of pp or mm consultant. Can anybody clear my problem.
    Edited by: Vachanala Rajasekhar on Dec 27, 2007 3:28 AM

    If possible; kindly change the order qty to either 9 or 11 and then check the order qty proposed by the system.
    Is this appearing for any particular material or a common error??
    If for any particular material, u need to check the material master but first do some change in order qty and then see the behaviour
    Please revert with your findings
    Rgds

  • Getting error when creat sales order and Stock Posting

    Hi
    I have created enterprise structure, xd01, mm01, ovkk but I count't post stock.
    When create sales order getting error is that
    1.This material is not defined for sales area 1000, 10, 00.
    And if i use this T.Code MB1C,
    2. Parameters for plant 1000 not maintained in Inventory Mgt.,
    *3. Unit *** is not created in language EN.*
    Thanks in advance

    Dear selvi sankaran
    1)  Compare the sales organization, distribution channel and division of customer and material.  In your case, either of that should have been created differently.  Maintain the same sales area and retry
    2)  Go to omi8 and maintain the required parameters to your plant
    3)  Go to Material Master, select "Additional data" and click on "Descriptions".  There maintain "EN" under language.
    thanks
    G. Lakshmipathi

  • Has anyone had a opf parse error with container.xml missing, when it is actually present plz ?

    Has anyone had a opf parse error with container.xml missing, when it is actually present plz ?

    Has anyone had a opf parse error with container.xml missing, when it is actually present plz ?

Maybe you are looking for

  • Is there a SEQUENCE object, like in Oracle?

    I want to create a table and I have 2 fields, user name and user e-mail. The user e-mail would be the key, but, for performance issues, I think it's advisable to create a 3rd field, simply to assign an ID to each row - a numerical field. So as to eve

  • Import finished with few errors...Help understanding it!

    Hi all, Yesterday, I finished to do an import in oracle. I used the impdp command and got few errors after the import was done. Here are some bits from my log. It was very long but I shortened it with the most common errors. I would appreciate your h

  • Creating a ztable

    hey guys i m creating a ztable, like mandt with data element mandt and zno with matnr and zprice as netpr. when i saved it, it takes netpr with data type CURR. and then when i exe it, it tells me tht i need to specify the reference field and table in

  • Create application under the new copied web dynpro object?

    Hi experts, Once I copied an entire web dynpro object, it doesn't allow me to create an application on the new one with the error message "there is no interface views under the component". But I see that there is a interface view named by the ancien

  • To Create a Classification View by using  Bapi

    Dear All, I want to create Classification view in Material Master using Bapi. I am using the bapi called  BAPI_OBJCL_CREATE. In that I am getting the valid output. But the problem is, the view is not created in the material master for the particular