Errors exist in required project(s)

I have not found anything as yet about this error. Does
anyone else get this?
I have built a few projects that have worked then for some
reason this error pops up as soon as I try to run an application
that had been working.
I am just getting started and this error message doesn't tell
me much about where to start looking for the problem.

Look at any projects your main project is referencing via
Project, properties, BuildPath.
The Problems pane does not show you any more detail?
Tracy

Similar Messages

  • Error MSB4057: The target "PlatformPrepareForBuild" does not exist in the project._

    Hi to all,
    I tried to compile my .sln with VS2010 but I had this error.
    error MSB4057: The target "PlatformPrepareForBuild" does not exist in the project.
    It occurs only compiling with win32 configuration but not with x64 one.
    Ideas?
    Thank you in advanced

    In which version of Visual Studio did you create this solution? And What type of the project in this solution? And could you please post the proj file here?
    If this solution is created in VS2012 or VS2013, please make sure the original solution is not corrupt, it can be opened and built successfully in the corresponding Visual Studio. For probable compatibility issues, you could check the documents here:
    Visual Studio 2012 Compatibility
    Visual Studio 2013 Compatibility
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Target 'install' does not exist in this project ",this is the error i get..

    i get this error when i try to install ,with the command : ant install,
    a webservice on tomcat, and when i type
    ant install it gives me this error:
    " Target 'install' does not exist in this project "
    i have a file in the same directory with the build.xml named install.xml
    and when i type ant build there is no error but by tiping ant install the error above occurs!

    ant install will execute the target install. As you did not define the build file, the standard one is taken: build.xml.
    These options could be of interest for you:
      -buildfile <file>      use given buildfile
        -file    <file>              ''
        -f       <file>              ''

  • URGENT...CO11N ERROR - No Pegged requirements exist

    Hi Guys,
    How can i troubleshoot this error "NO PEGGED REQUIREMENTS EXIST" during confirmation of production order.  We cannot final confirm an order due to this error.
    Immediate feedbacks are really appreciated.
    Thank you.
    Regards,
    Ching

    Hi Amit,
    Reservation is not deleted.
    The scenario is that I cannot final confirm an order when delivered qty is less than order qty due to scrap. Also, i cannot cancel a process in a production order with scrap qty. I encounter same error "no pegged requirements exist".
    Where else can i explore to get rid of the error?
    Please help.
    Thanks and best regards.

  • Error target 'sda.icssb2b' does not exist in this project

    Hello sir,
    I want to build ear(Application Archive) by buildtool and ant-current-bin for Modified
    SAP Internet Sales Web Applications but i have war file and sda file ,i build form ISA_BuildTool_10 guidline document , build failed because Target 'sda.icssb2b' does not exist in this project.
    I think 'sda.icssb2b' was generated by earbuilder.xml
    please help me
    thanks you
    Soothiluck Y.

    You gave a default target in the build.xml, and then didn't define the target.
    This is an Ant question. You're better off asking Ant questions on an Ant forum.

  • Hi, After I try to load either an existing or new project in Adobe Premier Elements 9 I just get a blank grey screen with none of the timeline, etc. boxes on view. This has suddenly happened, one day OK next not! At the top of the screen I get the normal

    Hi, After I try to load either an existing or new project in Adobe Premier Elements 9 I just get a blank grey screen with none of the timeline, etc. boxes on view. This has suddenly happened, one day OK next not! At the top of the screen I get the normal Pre icon, File, Edit, Clip, etc.
    I am planning on purchasing Premier Elements 13, would it be better if I bought a new program rather than download an upgrade, just in case the upgrade doesn't load properly due to the error with my existing program?
    If I the deleted Premier Elements 9 on my PC would I lose all my existing videos that were produced using Premier Elements 9 or would they be saved so that they can still be worked on in Premier Elements 13?
    Does Premier Elements 13 work with Windows 7?
    Thanks
    Terry

    Premiere Elements 13 absolutely works with Windows 7!
    In fact, I'd highly recommend you download the free trial and give it a test run.
    Meantime, go to Windows Update and make sure you have all of the latest Windows updates, including those that don't install automatically. Then go to the nVidia or ATI site and ensure you have the latest driver for your graphics card, and go to Apple.com and ensure you have the latest version of Quicktime, per the program's requirements.

  • Quicktime error (this application requires an Extra (Quicktime 3)

    I have just updated to the recent version of Director and am in the process of updating my previous files for teaching. Everthing seemed to work in the update process and I published a new Projector for my Mac running latest version of Snow Leopard. However, although the tutorial I created runs correctly when I run it direcly from Director's main program, when I run it from the projector I created I get this error:
    Director Player error
    This application requires an Extra (Quicktime 3) that either does not exist or failed to initialize properly. Please make sure
    the appropriate extras are in the Extras folder(s).
    Before I updated I didn't have an Extras folder. Can someone please advise, simply.
    Mickey

    Quicktime 3 is pretty ancient, and Director 11 does not use it.  You can probably get away with simply removing the xtra reference in Modify, Movie, Xtras....  Find the Quicktime 3 xtra and remove it.  Director 11 comes with Quicktime 6 asset which is probably going to be added to your project automatically, so that should be all you need to do.  If your code does something that is specific to Quicktime 3, then you may need to make adjustments to your code.  You also may need to remove and re-import the quictime videos if they fail to play.

  • Error while opening the projects in cProjects

    Hi,
        I am encountering a problem while opening the already created projects in cProjects. The error type is
    The following error text was processed in the system DVR : Type conflict when calling a function module.
    The error occurred on the application server and in the work process 0 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Method: IF_DPR_OBL_PROXY~LOAD_OBJECT_LINKS of program CL_DPR_OLR3_EASYDMS===========CP
    Method: IF_CGPL_ASSIGNMENT_PERSISTENCY~FETCH of program CL_DPR_OBL_PERSISTENCY========CP
    Method: LOAD of program CL_CGPL_ASSIGNMENTS===========CP
    Method: LOAD of program CL_CGPL_PROJECTS==============CP
    Method: LOAD of program CL_CGPL_ENTITIES==============CP
    Method: LOAD_PROJECTS of program CL_DPR_APPL_OBJECT_MANAGER====CP
    Method: LOAD_OBJECTS_OF_OBJECT_TYPE of program CL_DPR_BAPI_SERVICES==========CP
    I request you all to help me out solve this issue if you know.
    Regards
    Nachimuthu Ramesh

    Hi Vivek,
       Thanks for responding to my question. I made changes as per your suggestion and now I am not getting the error message whatever I forwarded. But I am getting another error message 'You require authorization to display Project`. Pls help me out to solve this issue.
                   Thanking you
    Regards,
    N.Ramesh

  • Error while deploying the project to ESB and deleting the services in ESB

    Hi,
    I am tiring to deploy a project to ESB, but I am getting this exception.
    error code: 0 : 10
    summary: An unhandled exception has been thrown in the ESB system. The exception reported is: "javax.transaction.RollbackException: Timed out
    at com.evermind.server.ApplicationServerTransaction.checkForRollbackOnlyWhileInCommit(ApplicationServerTransaction.java:582)
    at com.evermind.server.ApplicationServerTransaction.doCommit(ApplicationServerTransaction.java:244)
    at com.evermind.server.ApplicationServerTransaction.commit(ApplicationServerTransaction.java:130)
    at com.evermind.server.ApplicationServerTransactionManager.commit(ApplicationServerTransactionManager.java:433)
    at oracle.tip.esb.console.XMLConsoleManagerImpl.commit(Unknown Source)
    at oracle.tip.esb.configuration.deployment.JDevDeploymentManager.deploy(Unknown Source)
    at oracle.tip.esb.configuration.deployment.DeploymentServlet.doPost(Unknown Source)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
    at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
    at java.security.AccessController.doPrivileged(Native Method)
    at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
    at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
    at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
    at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
    at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
    at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
    at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:216)
    at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
    at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
    at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
    at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
    at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
    at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
    at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
    at java.lang.Thread.run(Thread.java:595)
    Fix: -
    In the earlier thread
    Error while deploying the project to ESB
    I was told to do some corrections. I did that and also I have bounced the OPMN. It worked for me.
    But again I am getting the same error, and I did this for the second time. But it didn’t work now.
    And I also have one more problem. I am not able to delete the existing services in the ESB console. When I try to delete the services I am getting the same error.
    I even checked the LOGS. The last three error payloads I see are
    <MESSAGE>
    <HEADER>
    <TSTZ_ORIGINATING>2007-04-03T13:15:30.846-04:00</TSTZ_ORIGINATING>
    <COMPONENT_ID>tip</COMPONENT_ID>
    <MSG_TYPE TYPE="WARNING"></MSG_TYPE>
    <MSG_LEVEL>1</MSG_LEVEL>
    <HOST_ID>usmlrh37.arrow.com</HOST_ID>
    <HOST_NWADDR>192.168.226.25</HOST_NWADDR>
    <MODULE_ID>esb.server.service.impl.inadapter</MODULE_ID>
    <THREAD_ID>26</THREAD_ID>
    <USER_ID>soauser</USER_ID>
    </HEADER>
    <CORRELATION_DATA>
    <EXEC_CONTEXT_ID><UNIQUE_ID>192.168.226.25:62472:1175620406177:7</UNIQUE_ID><SEQ>0</SEQ></EXEC_CONTEXT_ID>
    </CORRELATION_DATA>
    <PAYLOAD>
    <MSG_TEXT>JCA: ORABPEL-11207
    IO Failure in translator.
    IO failure because the Inbound XSD translator failed to DOM Parse InputStream .
    Check the error stack and fix the cause of the error. Contact oracle support if error is not fixable.
    </MSG_TEXT>
    <SUPPL_DETAIL><![CDATA[ORABPEL-11207
    IO Failure in translator.
    IO failure because the Inbound XSD translator failed to DOM Parse InputStream .
    Check the error stack and fix the cause of the error. Contact oracle support if error is not fixable.
         at oracle.tip.pc.services.translation.xlators.xsd.XSDTranslator.translateFromNative(XSDTranslator.java:136)
         at oracle.tip.adapter.mq.inbound.MessageProcessor.translateMessage(MessageProcessor.java:377)
         at oracle.tip.adapter.mq.inbound.MessageProcessor.processMessage(MessageProcessor.java:217)
         at oracle.tip.adapter.mq.inbound.MessageProcessor.run(MessageProcessor.java:165)
         at oracle.j2ee.connector.work.WorkWrapper.runTargetWork(WorkWrapper.java:242)
         at oracle.j2ee.connector.work.WorkWrapper.doWork(WorkWrapper.java:215)
         at oracle.j2ee.connector.work.WorkWrapper.run(WorkWrapper.java:190)
         at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:814)
         at java.lang.Thread.run(Thread.java:595)
    Caused by: java.io.UTFDataFormatException: Invalid UTF8 encoding.
         at oracle.xml.parser.v2.XMLUTF8Reader.checkUTF8Byte(XMLUTF8Reader.java:160)
         at oracle.xml.parser.v2.XMLUTF8Reader.readUTF8Char(XMLUTF8Reader.java:187)
         at oracle.xml.parser.v2.XMLUTF8Reader.fillBuffer(XMLUTF8Reader.java:120)
         at oracle.xml.parser.v2.XMLByteReader.saveBuffer(XMLByteReader.java:450)
         at oracle.xml.parser.v2.XMLReader.fillBuffer(XMLReader.java:2488)
         at oracle.xml.parser.v2.XMLReader.tryRead(XMLReader.java:1089)
         at oracle.xml.parser.v2.XMLReader.scanXMLDecl(XMLReader.java:3047)
         at oracle.xml.parser.v2.XMLReader.pushXMLReader(XMLReader.java:521)
         at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:287)
         at oracle.tip.pc.services.translation.xlators.xsd.XSDTranslator.translateFromNative(XSDTranslator.java:134)
         ... 8 more
    ]]></SUPPL_DETAIL>
    </PAYLOAD>
    </MESSAGE>
    <MESSAGE>
    <HEADER>
    <TSTZ_ORIGINATING>2007-04-03T13:15:30.850-04:00</TSTZ_ORIGINATING>
    <COMPONENT_ID>tip</COMPONENT_ID>
    <MSG_TYPE TYPE="ERROR"></MSG_TYPE>
    <MSG_LEVEL>1</MSG_LEVEL>
    <HOST_ID>usmlrh37.arrow.com</HOST_ID>
    <HOST_NWADDR>192.168.226.25</HOST_NWADDR>
    <MODULE_ID>esb.monitor.manager</MODULE_ID>
    <THREAD_ID>29</THREAD_ID>
    <USER_ID>soauser</USER_ID>
    </HEADER>
    <CORRELATION_DATA>
    <EXEC_CONTEXT_ID><UNIQUE_ID>192.168.226.25:62472:1175620406325:10</UNIQUE_ID><SEQ>87</SEQ></EXEC_CONTEXT_ID>
    </CORRELATION_DATA>
    <PAYLOAD>
    <MSG_TEXT>Activity monitor manager received an unexpected exception while processing the activity messages. Due to the error "ORA-01653: unable to extend table ORAESB.ESB_FAULTED_INSTANCE by 8 in tablespace USERS
    ", the activity message could not be stored.
    </MSG_TEXT>
    <SUPPL_DETAIL><![CDATA[oracle.tip.esb.monitor.MonitorException: Due to the error "ORA-01653: unable to extend table ORAESB.ESB_FAULTED_INSTANCE by 8 in tablespace USERS
    ", the activity message could not be stored.
         at oracle.tip.esb.monitor.manager.database.AbstractFaultPersister.persist(Unknown Source)
         at oracle.tip.esb.monitor.manager.database.DBActivityMessageStore.persistMessage(Unknown Source)
         at oracle.tip.esb.monitor.manager.database.DBActivityMessageStore.store(Unknown Source)
         at oracle.tip.esb.monitor.manager.ActivityMessageManager.handleMessage(Unknown Source)
         at oracle.tip.esb.server.dispatch.agent.ESBWork.process(Unknown Source)
         at oracle.tip.esb.server.dispatch.agent.ESBWork.run(Unknown Source)
         at oracle.j2ee.connector.work.WorkWrapper.runTargetWork(WorkWrapper.java:242)
         at oracle.j2ee.connector.work.WorkWrapper.doWork(WorkWrapper.java:215)
         at oracle.j2ee.connector.work.WorkWrapper.run(WorkWrapper.java:190)
         at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:814)
         at java.lang.Thread.run(Thread.java:595)
    Caused by: java.sql.SQLException: ORA-01653: unable to extend table ORAESB.ESB_FAULTED_INSTANCE by 8 in tablespace USERS
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:138)
         at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
         at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
         at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:639)
         at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:185)
         at oracle.jdbc.driver.T4CPreparedStatement.execute_for_rows(T4CPreparedStatement.java:633)
         at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1161)
         at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3001)
         at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3074)
         at oracle.oc4j.sql.proxy.PreparedStatementBCELProxy.executeUpdate(PreparedStatementBCELProxy.java:37)
         at oracle.tip.esb.monitor.manager.database.oracle.OracleFaultPersister.persist(Unknown Source)
         ... 11 more
    ]]></SUPPL_DETAIL>
    </PAYLOAD>
    </MESSAGE>
    <MESSAGE>
    <HEADER>
    <TSTZ_ORIGINATING>2007-04-03T13:15:30.853-04:00</TSTZ_ORIGINATING>
    <COMPONENT_ID>tip</COMPONENT_ID>
    <MSG_TYPE TYPE="ERROR"></MSG_TYPE>
    <MSG_LEVEL>1</MSG_LEVEL>
    <HOST_ID>usmlrh37.arrow.com</HOST_ID>
    <HOST_NWADDR>192.168.226.25</HOST_NWADDR>
    <MODULE_ID>esb.server.dispatch.agent</MODULE_ID>
    <THREAD_ID>29</THREAD_ID>
    <USER_ID>soauser</USER_ID>
    </HEADER>
    <CORRELATION_DATA>
    <EXEC_CONTEXT_ID><UNIQUE_ID>192.168.226.25:62472:1175620406325:10</UNIQUE_ID><SEQ>87</SEQ></EXEC_CONTEXT_ID>
    </CORRELATION_DATA>
    <PAYLOAD>
    <MSG_TEXT>Failed to process deferred message</MSG_TEXT>
    <SUPPL_DETAIL>oracle.tip.esb.server.common.exceptions.BusinessEventRejectionException: Error occured while handling monitor message dequeued from monitor topic. Message text is "<activityMessages><activityMessage order='0' type='2'><flowId>ECA97010E20611DBBFEBA191573C68FA</flowId><subFlowId>1175620530577</subFlowId><source>379D02F0DD5F11DBBF92D52E11DE817E</source><sourceQName>Demo_Inbound_Queue_to_DB.Demo_Inbound_Queue_to_DB_From_Queue</sourceQName><timestamp>1175620530577</timestamp><operationGUID>379E8990DD5F11DBBF92D52E11DE817E</operationGUID><operationQName>Demo_Inbound_Queue_to_DB.Demo_Inbound_Queue_to_DB_From_Queue_RS.Dequeue</operationQName><errorMessage><![CDATA[java.util.MissingResourceException
    java.util.MissingResourceException
    java.util.MissingResourceException
    ]]></errorMessage><exception><![CDATA[ORABPEL-13004
    java.util.MissingResourceException
    java.util.MissingResourceException
    java.util.MissingResourceException
         at oracle.tip.adapter.mq.inbound.MessageProcessor.translateMessage(MessageProcessor.java:388)
         at oracle.tip.adapter.mq.inbound.MessageProcessor.processMessage(MessageProcessor.java:217)
         at oracle.tip.adapter.mq.inbound.MessageProcessor.run(MessageProcessor.java:165)
         at oracle.j2ee.connector.work.WorkWrapper.runTargetWork(WorkWrapper.java:242)
         at oracle.j2ee.connector.work.WorkWrapper.doWork(WorkWrapper.java:215)
         at oracle.j2ee.connector.work.WorkWrapper.run(WorkWrapper.java:190)
         at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:814)
         at java.lang.Thread.run(Thread.java:595)
    ]]></exception><inPayload><![CDATA[ediExtract850Header           4085537732     8670SSD23962-29     008675989102007032220070322
    [b]Can any one please help me.
    Thanks
    Rao.

    Hi Bastiaan,
    Thanks for the reply. I have asked my DBA analyst to work on this. He has increased the table space. Now if I try to deploy the projects to ESB the following error is show.
    Error 1:
    error code: 1000 : 5
    summary: /rh37/u01/app/soa/10.1.3.1/SOA/integration/esb/oraesb/deploy/OAGISApp_OAGIS.zip (Read-only file system)
    Fix: Contact Oracle Support
    Error 2:
    Entity Deployment Failed
    error code: 0 : 10
    summary: An unhandled exception has been thrown in the ESB system. The exception reported is:
    "oracle.tip.esb.infra.exception.ESBRuntimeException: An unhandled exception has been thrown in the ESB system. The exception
    reported is: "java.lang.NullPointerException
         at oracle.tip.esb.console.CacheManager.updateService(Unknown Source)
         at oracle.tip.esb.console.CacheManager.replaceEntity(Unknown Source)
         at oracle.tip.esb.console.XMLConsoleManagerImpl.updateServiceInRepository(Unknown Source)
         at oracle.tip.esb.console.XMLConsoleManagerImpl.updateServiceFromElement(Unknown Source)
         at oracle.tip.esb.configuration.deployment.JDevDeploymentManager.createEntity(Unknown Source)
         at oracle.tip.esb.configuration.deployment.JDevDeploymentManager.createServices(Unknown Source)
         at oracle.tip.esb.configuration.deployment.JDevDeploymentManager.deploy(Unknown Source)
         at oracle.tip.esb.configuration.deployment.DeploymentServlet.doPost(Unknown Source)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
         at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
         at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
         at java.security.AccessController.doPrivileged(Native Method)
         at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
         at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
         at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
         at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:216)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
         at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
         at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
         at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
         at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
         at java.lang.Thread.run(Thread.java:595)
         at oracle.tip.esb.console.XMLConsoleManagerImpl.updateServiceInRepository(Unknown Source)
         at oracle.tip.esb.console.XMLConsoleManagerImpl.updateServiceFromElement(Unknown Source)
         at oracle.tip.esb.configuration.deployment.JDevDeploymentManager.createEntity(Unknown Source)
         at oracle.tip.esb.configuration.deployment.JDevDeploymentManager.createServices(Unknown Source)
         at oracle.tip.esb.configuration.deployment.JDevDeploymentManager.deploy(Unknown Source)
         at oracle.tip.esb.configuration.deployment.DeploymentServlet.doPost(Unknown Source)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
         at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
         at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
         at java.security.AccessController.doPrivileged(Native Method)
         at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
         at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
         at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
         at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:216)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
         at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
         at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
         at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
         at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
         at java.lang.Thread.run(Thread.java:595)
    Caused by: java.lang.NullPointerException
         at oracle.tip.esb.console.CacheManager.updateService(Unknown Source)
         at oracle.tip.esb.console.CacheManager.replaceEntity(Unknown Source)
         ... 26 more
    Fix: -
    I tried to stop and start the OPMN. It didn't work. Can you please help me.
    Thanks
    Rao.
    Message was edited by:
    user552961

  • Library project errors and imports of projects using them

    So this is something that I have put up with in FB for a long time now, but I decided to try doing some research today to see if there is a workaround as it is very annoying. Unfortunately I couldn't find anything.
    I attempted to file a bug/feature request, but it turns out that for some unknown reason FB is the only Adobe application that gives a link to another url (http://bugs.adobe.com/flex/) and, today at least, the link is dead so I have to post here instead.
    The problem is with library projects (which I love by the way). I use them a great deal and for more than just creating standalone APIs. As do many others, I like to have the core of many of my cross-platform projects in a library so that I can create other ‘harness’ projects for different runtimes and use the same bulk code. This way I can just write code in each master project that is particular to that runtime be it air or web or whatever - this is a great bit of functionality that I would really miss were it not there.
    As a result of this workflow however, I am often working in the library project directly in order to update all versions of a project. The problem arises when there is an error in the library project. When this happens, all the projects reading from the library lose all linkages to the swc and as a result the problem tab fills up with hundreds of problems that don’t exist, because as far as those projects are now concerned the swc no longer exists.
    Now I understand why this happens but surely FB could be made to understand what is going on and override (what I assume is) the compiler’s behaviour, and just not display these errors.
    This whole thing is exacerbated by (and may not even be that big a problem where it not for) the fact that I am forced to turn off 'build automatically' due to the 4.7 crash bug that has been reported here numerous times. Because of this I tend to write large chunks of code between each compile so I don't instantly know what has broken.
    Please save the feature that I enjoy so much by either getting FB to deal with the situation better or by fixing the crash bug so I can use ‘build automatically’ again… or god forbid… fix both!! I can dream. J
    If anyone has any good tips regarding this please let me know.
    Many thanks,
    James

    Can I then delete the project from the hard drive (as it's now in the library?) or will that delete the whole thing forever?
    That depends on how you did import the projects.  If your images are referenced they might still be stored in the previous projects, but if your library is managed, then it will be save to delete the projects you already imported.

  • File 'Form1.resx' already exists in the project

    Dear Everyone, 
    Could you help me to solve the File 'Form1.resx' already exists in the project. when I put my form under a sub folder?
    I tried to copy the 'Form1.resx' from project base folder to the sub folder, the Visual studio 2010 C++ complied but the software hang at: 
    this->Icon = (cli::safe_cast<System::Drawing::Icon^  >(resources->GetObject(L"$this.Icon")));
    I am using Visual studio C++ 2010.
    Here is an explanation from someone with the same issue:
    "if you create a new Windows Form in a C++/CLI application and choose to save the .h and .cpp files in a location other than the project folder - for example a sub folder below the sub folder - the form gets created ok, but when you try to change
    anything on it you get an error message saying:
    "Could not find the file: <path_to_project_folder>\<subfolder>\<form_name>.resx"
    If you try to save the changes you get another error message saying:
    "File <path_to_project_folder>\<form_name>.resx' already exists in the project."
    followed by another error message:
    "Error HRESULT E_FAIL has been returned from a call to a COM component."
    Regardless of where you save the .h file, Visual studio creates the .resx file in the project folder and then looks for it in the same folder as the .h file, and can't find it!"

    Hi Shu Hu,
    I followed you suggestion and the issue was still there. I got the software crashed at:
    this->Icon = (cli::safe_cast<System::Drawing::Icon^  >(resources->GetObject(L"$this.Icon")));
    Here are my steps:
    1. Create a subdirectory
    2. Add new form under new sub-directory
    3. Change form icon from "Properties" tab
    4. ignore error
    5. copy the *.resx from the root of the project to sub-directory
    6. close and reopen the project
    7. remove *.resx from project Solution
    8. Add *.resx under sub-directory to Header Files
    9. Add some code to call the form.
    10. Build & run
    I saw this issue reported at least since VS C++ 2005 and it seemed there is no fix.
    I tried these steps to reproduce this issue. But my project works well on my side. According to your application hang at : "this->Icon = (cli::safe_cast<System::Drawing::Icon^  >(resources->GetObject(L"$this.Icon")));"
    I guess you may forget one step, could you try open the .resx file and click add resource -> add existing file. I guess your icon file didn't embed in resx file.
    How to report this issue to Microsoft development team so they can fix it?
    I cannot reproduce this issue. If you have a sample to reproduce this issue, you could submit this issue to
    microsoft connect. I am also glad to test your sample on my side, and you could share it on a public Onedrive folder with me.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Target 'install' does not exist in this project (TOmcat)

    i get this error when i try to install a webservice on tomcat, and when i type
    ant install it gives me this error:
    " Target 'install' does not exist in this project "
    i have a file in the same directory with the build.xml named install.xml
    and when i type ant build there is no error but by tiping ant install the error above occurs!
    Message was edited by:
    TheBeginner_77

    ant install will execute the target install. As you did not define the build file, the standard one is taken: build.xml.
    These options could be of interest for you:
      -buildfile <file>      use given buildfile
        -file    <file>              ''
        -f       <file>              ''

  • Default Target Main Build does not exist in this project

    I am learning ant with eclipse and wanted to use ant build.xml to compile and run my class. I was getting the following error when i just tried to use ant.
    Default Target Main Build does not exist in this project
    package src;
    public class Ch05_02 {
        public static void main(String[] args) {
            System.out.println("This code was built using Ant.");
    <?xml version="1.0" encoding = "UTF-8"?>
    <project name="Ch05_02" default="Main Build" basedir=".">
    </project>Ref: http://www.javabeginner.com/Ch05_02.zip
    Edited by: hemanthjava on Oct 28, 2007 5:43 AM

    You gave a default target in the build.xml, and then didn't define the target.
    This is an Ant question. You're better off asking Ant questions on an Ant forum.

  • Rhsnippet.apj Error with RoboHTML 11 Project on Network

    I have an RH 11 project on a network drive. The project has 485 snippets. When adding or modifying snippets I get the following error:
    An error occurred while trying to read data from <n:\roboHelp Projects\\rhsnippet.apj <1>.
    When I open the rhsnippet.apj file, the file is truncated like this:
    <file>
                <name>mysnippet.hts</name>
                <comments></comments
    It seems that RoboHelp cannot complete writing to the APJ file.
    After closing and reopening the project, I then get a message saying the cpd is corrupt. After deleting the cpd and reopening the project, I still get a message saying the project is corrupt.
    The only way I have found to fix the project is to move the project back to a local drive, delete the cpd, delete the rhsnippet.apj file and re-import all the snippets.
    I have seen a similar issue which was resolved by moving to another network drive. I moved my project to another network drive but the issue still occurred.
    rhsnippet.apj Error with RoboHTML 10 Project on Network
    My experience with R10 R11 projects on a network drive has been problematic, despite Adobes assertion that R11 and R10 projects now work on network drives. For example, Adobe support confirmed that RoboHelp does not support projects on a network drive that uses DFS (Distributed File System). I have found that large projects seem to be problematic on network drives.
    I suspect that part of this issue is the large amount of snippets I have, as other projects on the network drive don't appear to have this issue as they do not contain a large amount of snippets.
    If anybody else has experienced a similar issue with projects on a network drive related to snippets I'd be grateful for some advice.

    Thanks for the advice Peter, but deleting the CPD does not fix the issue. I have 500 snippets because I have 500 fields (and growing all the time) to document that can appear in multiple reports and also require that each field is documented separately. So although I seem to be pushing the envelope with the amount of snippets, I am grateful for the existence of snippets because trying to document this without snippets would be a nightmare!
    One thing that annoys me is that you cannot apply a style sheet to multiple snippets at the same time. At least I have not found a way. Is there a way of doing this – short of editing the HTML for each snippet individually? I will add this to a feature request for RoboHelp as well as log a bug report with Adobe.

  • Error exists when Admin2 loads same file in BW but loads ok for Admin1. Why

    Hi,
    Why does this error exists when Admin2 loads same file but loads ok for Admin1?
    A u201CCalendaru201D column in a flat file has value 200810  i.e. October of 2008.
    BW Admin 1:
    When Admin1 loads this file, it comes out ok as Calendar Year/Month as 200810 in PSA and the load completes without any error.
    BW Admin 2:
    Now, for the same file, when Admin 2 loads (on his laptop), the load fails and gets the message that, "....  00810 is not plausible..."
    Somehow, it drops the initial 2 from 200810 during the load for Admin 2.
    The suspicion was that Admin 1 had as Default in SU3,
    Date format:  YYYY/MM/DD.
    Admin 2 therefore switched his to the same Date format:  YYYY/MM/DD.
    Yet, the described load problem still exists.
    Any suggestions?
    Thanks

    Hi,
    Yes, it is the same infopackage for the same cube, Admin 1 used to do this load, and is now moving on to a different project, so the only difference is that Admin 2 is now doing the same job from his workstation but everything on the Data Flow is the same.
    In fact, Admin 2 went to Admin 1, after forwarding the .csv file and on Admin 2's workstation, the same file was tested by Admin 2, using the same infopackage, and it loaded without the above problem for Admin 2.
    Thanks

Maybe you are looking for

  • How do you delete an app from your iPhone? Deleting it from iTunes is not working.

    Deleting the app from iTunes when my iPhone is hooked up the my MacBook isn't working. How do I get rid of apps I don't like?

  • Can not update tiger and safari does not start

    Hi everybody, I have actually two but probably interrelated problems: First, safari does not start and second, I can not update tiger. It all started a few days ago on my MacBook (Intel). Somehow, Safari produced an error (I only guess that it was Sa

  • Firefox 6 bug stalls on many sites

    For some reason or another Firefox 6 while it looks great is actually acting very buggy. I use a hotmail account and it constant stalls there and on other sites forcing me to have to constantly refresh the screen in order to get it to open to the nex

  • Can't connect to sql server 2008

    Hi. I have 2 databases running, oracle 10g express and sql server 2008 express. I can connect with sql developer to the oracle database, but cant establish a connection to the sql server database. Using the Microsoft SQL Server Management Studio i ca

  • Handling Transaction in Webdynpro problem?

    hi All of you; I am getting very peculiar problem :The problem is that data that i am inserting into R/3 using BAPI is committing without any call of Commit Bapi.The function Module of that BAPI also donot have commit method.Then also data is inserti