Target 'install' does not exist in this project ",this is the error i get..

i get this error when i try to install ,with the command : ant install,
a webservice on tomcat, and when i type
ant install it gives me this error:
" Target 'install' does not exist in this project "
i have a file in the same directory with the build.xml named install.xml
and when i type ant build there is no error but by tiping ant install the error above occurs!

ant install will execute the target install. As you did not define the build file, the standard one is taken: build.xml.
These options could be of interest for you:
-buildfile <file>      use given buildfile
    -file    <file>              ''
    -f       <file>              ''

Similar Messages

Target 'install' does not exist in this project (TOmcat)

i get this error when i try to install a webservice on tomcat, and when i type
ant install it gives me this error:
" Target 'install' does not exist in this project "
i have a file in the same directory with the build.xml named install.xml
and when i type ant build there is no error but by tiping ant install the error above occurs!
Message was edited by:
TheBeginner_77

ant install will execute the target install. As you did not define the build file, the standard one is taken: build.xml.
These options could be of interest for you:
-buildfile <file>      use given buildfile
    -file    <file>              ''
    -f       <file>              ''

Error MSB4057: The target "PlatformPrepareForBuild" does not exist in the project._

Hi to all,
I tried to compile my .sln with VS2010 but I had this error.
error MSB4057: The target "PlatformPrepareForBuild" does not exist in the project.
It occurs only compiling with win32 configuration but not with x64 one.
Ideas?
Thank you in advanced

In which version of Visual Studio did you create this solution? And What type of the project in this solution? And could you please post the proj file here?
If this solution is created in VS2012 or VS2013, please make sure the original solution is not corrupt, it can be opened and built successfully in the corresponding Visual Studio. For probable compatibility issues, you could check the documents here:
Visual Studio 2012 Compatibility
Visual Studio 2013 Compatibility
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Ora-12545 connect failed because target host does not exist(plsql develper)

Hi,
I am using Oracle 10g version, and i am using plsql developer.
I am able to connect Oracle through sql*plus, But i am not able to connect Oracle through plsql developer from past few days, it is giving me error like:
ora-12545 connect failed because target host does not exist
I have not done any changes in setting though i am getting this problem, earlier i was able to work with plsql developer very good.
I am sending the TNS file for your reference.
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = vnod-PC)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
Please help me in this.
Thanks,
Vinod

910575 wrote:
Hi,
I am using Oracle 10g version, and i am using plsql developer.There are numerous products with similar names.
Which vendor provides your software & which version of the software do you have?
Is the Oracle database server system installed on the same system as your client software?
post results from following SQL
SELECT * FROM V$VERSION;
Handle:     910575
Email:     [email protected]
Status Level:     Newbie
Registered:     Jan 26, 2012
Total Posts:     42
Total Questions:     20 (18 unresolved)
Why so many unanswered questions?
Edited by: sb92075 on May 18, 2012 9:30 PM

Why do I get the error "The target GatherAllFilesToPublish does not exist"?

I have recently installed the new Azure development tools for Visual Studio 2010 service pack 1. Every time that I try to publish an existing website (using file system deployment) I get the following error:
The target "GatherAllFilesToPublish" does not exist in the project.
Can anyone tell me what I am missing?
Thanks

Followed the suggestion from Yuri without success,
then I found the tag at end of config file as shown bellow to
<TargetName="MvcBuildViews"AfterTargets="AfterBuild"Condition="'$(MvcBuildViews)'=='true'">
and I changed to
<TargetName="GatherAllFilesToPublish"AfterTargets="AfterBuild"Condition="'$(MvcBuildViews)'=='true'">
so, it started deploying to file system as before I install the Azure SDK 2.2.
Bjunio

The target "GetTargetPath" does not exist

Hi the following error occurs when i build a solution containing my VSPackage project and a windowsApplication.
Error 1 The target "GetTargetPath" does not exist in the project. MyLibrary18.mlproj WindowsApplication1
Please help
Thanks
kajal

Hi,
I solved it myself.
in the custom project file the following line is required to compile the project and have referenced too as a project reference:-
<Import Project="$(MSBuildBinPath)\Microsoft.Common.targets" />
Thanks
Kajal

30:6519:Target application does not exist.

Hello,
I want to delete an existing application, but I'm getting the following error "Target application does not exist" and I can't delete neither deploy.
Do you know what I can do to resolve this issue?
Regards,
Rodrigo

Hello Tod,
I'm talking about EPMA, version 11.1.1.3.
I can see the application in EAS and in the Planning Database.
In the log I'm get the following errors:
java.util.MissingResourceException: Can't find bundle for base name HspImgs, locale pt_PT
java.util.MissingResourceException: Can't find bundle for base name HspCustomImgs, locale pt_PT
java.lang.Exception: APP_NONE_SELECTED
     at HspLogOn.Handle(Unknown Source)
     at HspLogOn.doPost(Unknown Source)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
As aditional information this happened after I migrate the application artifcats.
Your help is much appreciated. I don't know what to do.
Regards,
Rodrigo

[SOLVED] ABS - nasm - install file (nasm.install) does not exist

I was attempting to build the nasm package and I encountered the following error:
==> ERROR: install file (nasm.install) does not exist.
When reviewing the PKGBUILD file there was a line in the header:
install=nasm.install
ArchWiki (PKGBUILD) explains the install directive
The name of the .install script to be included in the package. pacman has the ability to store and execute a package-specific script when it installs, removes or upgrades a package. The script contains the following functions which run at different times
I removed the install= line and everything appeared to work. My question is... does anyone know if the install script it was expecting to find did anything special that is going to cause me grief going forward?
Thx
Last edited by dwardca (2013-07-06 04:43:41)

I figured out what I did wrong. I copied only the PKGBUILD file out of /var/abs/extra/nasm folder .. the nasm.install was still in the folder.
Explains why I couldn't find the answer on Google.
Last edited by dwardca (2013-07-06 04:44:13)

HT201363 i have forgotten the security code and an e-mail is being sent to an e-mail account which does not exist. How do i change the e-mail details

We have forgotten the security code question and each time I request a reset it is being sent to an e-mail addres which does not exist. How can I change the e-mail address to my current e-mail address. We have put money onto an ITunes account which is asking for this security question. This has never happened before. Any assistance would be appreciated. thank you

Hello, covey98.
Thank you for visiting Apple Support Communities.
I would recommend reaching out to us via the link below to assist you with this issue.
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Cheers,
Jason H.

How to update zero to a column value when record does not exist in table but should display the column value when it exists in table?

Hello Everyone,
How to update zero to a column value when record does not exist in table but should display the column value when it exists in table
Regards
Regards Gautam S

As per my understanding...
You Would like to see this
Code:
SELECT COALESCE(Salary,0) from Employee;
Regards
Shivaprasad S
Please mark as answer if helpful
Shiv

I have an ExportPDF subscription under an old account for which the email does not exist anymore and I have forgotten the password. Therefore I cannot reset the password. I hav created a new Adobe account so how do I get the subscription for ExportPDF m

I have an ExportPDF subscription under an old account for which the email does not exist anymore and I have forgotten the password. Therefore I cannot reset the password. I have created a new Adobe account so how do I get the subscription for ExportPDF moved to the new account?

Hi lgmmo,
I think your best best to get this resolved is to contact Adobe Customer Care. Here's the contact info: Contact Customer Care.
A quick Chat session should get you fixed up.
Please let us know if you have additional questions.
Best,
Sara

(-42110) is the error I get when trying to play films on iTunes - any help on this ?, (-42110) is the error I get when trying to play films on iTunes - any help on this ?

(-42110) is the error I get when trying to play films on iTunes - any help on this ?, (-42110) is the error I get when trying to play films on iTunes - any help on this ?

Hello AndyDryva
If you have the latest version of iTunes and the error code is still happening, then the next thing is to remove the SC Info folder on your computer. Check out the article below on how to do that.
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
Regards,
-Norm G.

Firefox/3.6.10 shows message whenever I click on an icon needing Internet access, saying 'Firefox couldn't install this item because "install rdf" (provided by the item) is not well-formed or does not exist' and advising me to contact the author - ???

Whenever access to the Internet is needed, clicking on any icon or link (including the Firefox icon) results in a delay of around 20 secs., followed by the appearance of the error message, headed "Malformed File". The message reads 'Firefox couldn't install this item because "install rdf" (provided by the item) is not well-formed or does not exist. Please contact the author about this problem.'
Clicking OK or closing the box leads to a further delay of about 20 secs. after which the required action takes place! Of course, it could be said that it's really only a delay, so I should just get used to it, but it's still a malfunction, it's a pain in the neck or another region, and I really would like to cure it. Any suggestions - please????

https://support.mozilla.com/en-US/questions/756907

File Adapter: Target directory does not exist

Hi All,
Using RFC to File Scenario.
While processing in File adapter, i get following error for the target directory.
Delivering the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Target directory '
*********************\Out' does not exist and cannot be created.
Although I am able to use the same target directory on my local machine.

I think FTP user didnt have suffiecinet otherrization to create directory in FTP, check once again Directory format entered is correct.
if you have phycial access to FTP then create one folder and enter the same in File channel and push one message and let us know the result.
Regards,
Raj

Target currency does not exist (although fix target currency used)

Hello!
we are using BW 7.3 and I have a problem with currency translation in bex query designer.
I have currency conversion type in RSCUR called EUR_PC:
It has fix target currency "EUR", exchange rate type "P" and time reference is based on an InfoObject.
It has already been used in some query and worked fine for years.
Two weeks ago I created a new query and i wanted to use this currency type. But when i click on the key figure >> Conversions Tab >> select the Conversion Type EUR_PC >> then it shows only crosses in the target currency field.
Could anybody help me, please? I have no idea what's wrong here....
Thanks and regards,
Katharina

Hi,
i tried to use the precalculated value, but that doesn't help.
Then I have no currency conversion, instead original currency is used.
So thank you for your answer, but that does not solve my problem.
Any other ideas?
Following error comes up, when i want to save the query:
regards,
Katharina

Target 'install' does not exist in this project ",this is the error i get..

Similar Messages

Maybe you are looking for