Errors in phase MAIN_SHDIMP/SHADOW_IMPORT_INC for upgrade ERP 6.0 EHP4
Hello,
I am executing the upgrade to ERP 6.0 EHP4-Stack4 and in the phase MAIN_SHDIMP/SHADOW_IMPORT_INC, i have the follow error:
"SHADOW IMPORT ERRORS and RETURN CODE in SAPK-40001INCPRXRPM.FSD
2EETW165 Function "/RPM/RELATION_MODIFY (/RPM/CONFIG|15)" does not fit into the existing function group "(/RPM/RELATION_DATA|02)".
Long text:
Cause
A function module with LIMU FUNC ... was transported in the transport
request.
An import is only possible if this function module belongs to the same
function group in the target system and
has the same internal number as in the source system.
These conditions were not observed in the target system.
This problem can occur,
if an entry LIMU FUNC ... is included in a transport request manually
in the object list editor,
or if a function module is deleted, and then created again under the
same name in another function group, and deletion and creation are
recorded in the same change request.
System Response
The function module was not imported.
What to do
You can remove the error by making another transport from the source
system. Transport the affected function groups once more in their
entirety. To do this, use the transport object R3TR FUGR ... .
You can avoid the second type of error (deletion and creation in
another function group) as follows:
In the ABAP Workbench use the function <LS>Reassign</>, or record the
deletion and the new creation in separate change requests.
Release the change request with the deletion before you release the
change request with the new creation.
1 ETP111 exit code : "8"
I don't found the function module or function group in the system, this system is the development instance.
Regards, Alberto.
Hi,
I have checked the link before to open my question, but I can't or don't follow the instructions:
1. Ensure Namespace /RPM is modifiable in SE06
2. Call transaction SE37
3.Enter /RPM/RELATION_MODIFY
4.Select Function module-> Other functions-> Rename
5.Rename it to /RPM/RELATION_MODIFY_OLD
6.Release the request if one was created in the process
7.Restart the phase
The Function Module and the Function Group does not exist in our system. And when I can to create the Function Gorup, I have the follow error in the SE80: "Namespace /RMP/ does not exist", and when I try to create the namespace /RPM/ I don't have the "repair license".
I'm using the EHPI Upgrade tools for the EHP4.
Regards, Alberto
Similar Messages
-
Hello!
We are busy upgrading from ERP 2004 to ECC 604 SR1.
Error:
Checks after phase MAIN_SHDIMP/SHADOW_IMPORT_INC were negative!
Last error code set: Unresolved requests in buffer TST Check logfiles
'SHDALLIMP.ELG' and '/binaries/sap/TST/upg/abap/log/SAPup.ECO'
tp and r3trance updated to new versions.
Error in file SHDALLIMP.ELG
SHADOW IMPORT ERRORS and RETURN CODE in SAPK-60403INCCEE.TST
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2EETW000 key field /ATL/AT086-MANDT contained the value '205': key field /ATL/AT086-MANDT missing, key is truncated.
2EETW000 key field /ATL/AT086-MANDT contained the value '205': key field /ATL/AT086-MANDT missing, key is truncated.
2EETW000 key field /ATL/AT086-MANDT contained the value '205': key field /ATL/AT086-MANDT missing, key is truncated.
2EETW000 key field /ATL/AT086-MANDT contained the value '205': key field /ATL/AT086-MANDT missing, key is truncated.
1 ETP111 exit code : "8"
Error in file SAPK-60403INCCEE.TST
3 ETW674Xstart import of "R3TRTABU/ATL/AT086" ...
2EETW000 key field /ATL/AT086-MANDT contained the value '205': key field /ATL/AT086-MANDT missing, key is truncated.
4 ETW000 0 entries from /ATL/AT086 (%) deleted.
2EETW000 key field /ATL/AT086-MANDT contained the value '205': key field /ATL/AT086-MANDT missing, key is truncated.
4 ETW000 0 entries from /ATL/AT086 (%) deleted.
4 ETW000 "E071~"-LOCKFLAGs 000002 - 000136 updated ('3', 135 entries).
4 ETW000 date&time: 16.05.2011 - 17:08:33
3 ETW676 end import of "R3TRTABU/ATL/AT086" (warnings).
4 ETW000 "E071~"-LOCKFLAGs 002009 - 002009 updated ('1', 1 entries).
4 ETW690 COMMIT "17460" "35048"
Error in file SAPup.ECO
Phase SHADOW_IMPORT_INC:
BLOCKED SIGNALS: ''
SAPup> Starting subprocess 13063 at 20110516170633
ENV: DIR_LIBRARY=/binaries/sap/TST/upg/abap/exenew
ENV: JAVA_HOME=/usr/j2se
ENV: LD_LIBRARY_PATH=/binaries/sap/TST/upg/abap/exenew:/binaries/sap/TST/upg/jvm/jre/lib/sparcv9/server:/binaries/sap/TST/upg/jvm/jre/lib/sparcv9:/binaries/sap/TST/upg/jvm/jre/../lib/sparcv9:/etc/emc/rsa/cst/lib:/usr/sap/TST/SYS/exe/run
ENV: NLS_LANG=AMERICAN_AMERICA.UTF8
ENV: ORACLE_BASE=/oracle
ENV: ORACLE_HOME=/oracle/TST/102_64
ENV: ORACLE_PSRV=TST
ENV: ORACLE_SID=TST
ENV: ORA_NLS33=/oracle/client/92x_64/ocommon/nls/admin/data
ENV: PATH=/binaries/sap/TST/upg/abap/exenew:/oracle/TST/102_64/bin:.:/home/tstadm:/usr/sap/TST/SYS/exe/run:/usr/bin:/opt/EMCpower/bin:/etc/emc/bin:/etc:/usr/ccs/bin:/usr/ucb
ENV: SAPSYSTEMNAME=TST
ENV: auth_shadow_upgrade=0
ENV: dbms_type=ORA
ENV: dbs_ora_schema=SAPR3Q
ENV: dbs_ora_tnsname=TST
EXECUTING /binaries/sap/TST/upg/abap/exenew/tp (/binaries/sap/TST/upg/abap/exenew/tp) pf=/binaries/sap/TST/upg/abap/bin/SHDALLIMP.TPP put TST
This is /binaries/sap/TST/upg/abap/exenew/tp version 376.01.25 (release 701, unicode enabled)
ERROR: stopping on error 8 during SHADOW IMPORT
Warning: Parameter INTERRUPT is no longer used.
Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
Warning: Parameter WITH_TACOB is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
Warning: Parameter INTERRUPT is no longer used.
Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
Warning: Parameter WITH_TACOB is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
Warning: Parameter DBCONFPATH is no longer used.
stopping on error 8 during SHADOW IMPORT
tp returncode summary:
TOOLS: Highest return code of single steps was: 8
SWARNS: Highest tp internal severe warning was: 0151
tp finished with return code: 151
meaning:
Some warning regarding buffer entries
Process with ID 13063 terminated with status 151
Any idea for helpme,
thanks in advise.
Roman.Hi,
Check SAP Note 1293059 - C-CEE 110_604: Add-On Support Packages. Your problem is documented in this note.
Thanks
Sunny -
Error in phase: DISASSEMBLE Reason for error: PATCH_FILE_READ_ERROR
Hello All
I am applying support Package: SAPKB70009 on SAP ECC 6.0 for component SAP_BASIS with release 700.
I am getting following error
The import was stopped, since an error occurred during the phase
DISASSEMBLE, which the Support Package Manager is unable to resolve
without your input.
After you have corrected the cause of the error, continue with the
import by choosing Support Package -> Import queue from the initial
screen of the Support Package Manager.
The following details help you to analyze the problem:
- Error in phase: DISASSEMBLE
- Reason for error: PATCH_FILE_READ_ERROR
- Return code: 12
- Error message: OCS Package: SAPKB70009
Guys can you please shed some light on how to solve this issue.Hi,
There might be 2 reaons for the error.
1) corrupted files in EPS/in or improper CAR of the files.
2) the file permissions in EPS/in check whether the files are having proper permssions like 775 with owner <SID>adm
-Srini -
SAP Notes for installing ERP 6.0 EHP4 on NW 7.01 on IBM i 7.1
Hello members
The last time I install SAP on IBM i was about 3 years ago with ECC 6 on NW 7.00 on IBM i V5R4. Now, I have to install ERP 6.0 EHP4 on NW 7.01 on IBM i 7.1 for my new customer (only the ABAP ERP components - not CRM, SCM, SRM or Java stack). I try to first gather all important SAP notes that would be useful for me in doing the installation. By far, I identify note 1234455 (NetWeaver 7.0 EHP1/Business Suite 7 - IBM i) and 1432783 (Known Issued with IBM i 7.1). Is there any other notes I should be aware of for a successful installation?
I also need to identify the list of installation DVD that I need for this installation but, so far, I can identify DVD 51038620 (Install Master) and 51036902 (Install Export). I know I need more DVD than these two but I could not find any SAP notes that list all the DVD number I need.
Any suggestion would be very much appreciated?
Thanks.Hello Satid,
nice to hear from you )
As you already pointed out, it is always useful, to read and apply the notes ...
What is special here ?
- Installation runs similar to your ecc6 stuff from 3 years ago - we typically replace the kernel of the kernel CD with a new patch level on the CD already.
- the big point is, that the system does NOT have EHP4 installed when you are done with SAPinst ;-(
you do have NW 7.01 and ERP6.00 => you have to start SAPEHPI immediately after that for all the components, that you require on EHP4. This is 95% of an complete upgrade => the installation is 2 . 3 times the effort of what wou would expect ...
If you do have questions, don't hesitate and contact us.
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.com http://www.4soi.de http://www.easymarketplace.de -
Error while running EHPI Tool for upgrading EHP2 ON Netweaver as abap
Hello Guys,
Hope you guys are rocking...
we are in the process of upgrading the SAP Netweaver version from SAP NETWEAVER 7.0 to EHP2 Through EHPI Tool in the preparation phase we are facinga issue....
ERROR: The new SAP tools in /usr/sap/EHPI/abap/exe cannot connect to your database.
Possible reasons are:
- Environment variables are not properly set for the version of the
database client which is used by the new tools.
- Required database libraries are not accessible or cannot be found neither
through a compiled-in path nor through explicit search via the
shared library path.
- Auxiliary files such as language files etc. are not compatible with
this version of the database client.
Please check database / OS specific notes referenced in the manual for more help.
The log file /usr/sap/EHPI/abap/log/DBCONNCHK.LOG contains more
details about the failure.
done latest kernel upgrade in sys /exe/run and ehpi/abap/exe
and tested connection from EHPI/abap/exe r3trans -d success.
please do needful.
Regards,
SyedDear Syed,
Regarding the issue faced by you please make sure you download and replace the the latest patch of
tp, R3trans and Database Library (dbsl library) of target release(720) to the /usr/sap/EHPI/abap/exe and /exenew
directories and then restart the EHPI tool (repeat the phase).
Also check if the file dboraslib.sl was existing in the new patches and folders which are replaced.
Look into Note 830578 - Oracle database 10g: Unix environment variable
to check the environment variable are set properly or not.
This should resolve your issue.
Best Regards,
Abhishek -
HCM errors in phase Identify Objects for Transfer and Start Data Selection.
Hello Colleagues ,
Background: We are using TDMS HCM PA PD Expert package to transfer all of the HCM data
We are using TDMS 4.0 SP 5. We are trying to do the Configuraition in Identify Objects for Transfer and Start Data Selection.. In this phase, we are encountering the issue of 'choose to confirm to trigger data selection'. The only option in this activit is'confirm batch' and 'confirm online'. Even if we press the button, we are still encountering issues. What selections then or values can we use?Thank you. Kindly see screen shot
Regards,
MeinardHello Meinard,
There could be two issues:
First check if you have assigned the target ranges for the dialog user which you are using to select data from sender system. You need to maintain target ranges in activity 'Define target ranges for users' which you can find under activity "Configuration and Utilities in Control system".
Secondly, there could be authorizaton issues for the sender system user. Check for any authorization issue in SU53 in sender system for the user which you used to logon to sender system.
Thanks
Anita -
Technical Usage for SAP ERP 6.0 EhP4
Hello gurus,
I am planning to upgrde my system EC2 which is an SAP ERP 6.0 on an Oracle10g database with OS Windows Server 2003.
But I dont know which technical usage to choose.
Using the url http://<hostname>:5<instance number>00/utl/UsageTypesInfo, the following are my system's usage types:
SAP ERP 2005/SR2 XSS XSS Self Services
SAP ERP 2005/SR2 LSOCP LSOCP Learning Solution Content Player
SAP ERP 2005/SR2 BD BD Biller Direct
SAP ERP 2005/SR2 XECO XECO Extended E-Selling Components
SAP ERP 2005/SR2 ECC ECC Central Component
SAP ERP 2005/SR2 BP-ERP BP ERP Business Packages (Portal Content)
SAP NetWeaver 2004s/SR2 PI PI Process Integration
SAP NetWeaver 2004s/SR2 BI BI Java BI Java
SAP NetWeaver 2004s/SR2 AS AS Java Application Server Java
SAP NetWeaver 2004s/SR2 EPC EP Core Enterprise Portal Core Components
SAP NetWeaver 2004s/SR2 EP EP Enterprise Portal
SAP NetWeaver 2004s/SR2 AAS AS ABAP Application Server ABAP
There seems to be no direct equivalent of these usage types in the technical usages I see on MOPZ.
Please advise.
Thanks, Cha ChaHello,
You may check the attachments in note 1165438 for business function -> technical usage equivalence.
as for usage types, you seem to have listed product instances instead. Perhaps you can also have a look at the product instances -> technical usages equivalences in the attachments to note 1165438
Anyway, the technical usagesI can see right away are:
- SAP Learning Sol-Frontend CP
- XSS Self Services
- SAP FSCM - Biller Direct
- Central applications
- SAP XECO
Netweaver 7 app server ABAP, Netweaver PI, and Enterprise Portal product instances don't have any additional technical usages assigned.
I suggest also the service http://service.sap.com/bfp for a free service that will help you to select technical usages in your EHP4 install.
Best regards,
Miguel Ariñ -
EHP4 Installation: MAIN_SHDIMP/SHADOW_IMPORT_INC
Hello all.
We are installing EHP4 on a SAP ERP 6.0 using EHPI and got the following error on the MAIN_SHDIMP/SHADOW_IMPORT_INC phase:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SHADOW IMPORT ERRORS and RETURN CODE in SAPKE60416.ERP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2EETW165 Function "HR_PL_D_DE_HRPAYDE_ST (31DE|76)" does not fit into the existing function group "(3101|58)".
In other threads I have read that we have to check if this package is in the same request order as another version of the same package. If so, we can choose in SPAM: Extras -> Ignore test import errors
Our Shadow instance is now stopped by the installation (grey, with a forbidden sign on it).
Should we start Shadow instance for doing this checkings on it?
Thank you ver much !
Emilio LeiteI know it's a bit late but i had the same problem and i got the following response from SAP
- Goto SE37, rename HR_PL_D_DE_HRPAYDE_ST to HR_PL_D_DE_HRPAYDE_ST_OLD
- Release the request created in this process
- Import the SPAM queue
- Check if HR_PL_D_DE_HRPAYDE_ST exists again and if so then delete the
HR_PL_D_DE_HRPAYDE_ST_OLD
Similarly proceed for other errors.
I hope this will help someone.
Greetings
Marco -
SAINT error in phase DISASSEMBLE
Hi,
I am performing Delta-upgrade of component ST-SER from 700_2007_1 to 700_2008_1 via SAINT on our Solution Manager 4.0 system. (Windows server 2003 / MS SQL)
The SAR archive (KITLONB.SAR) is of 141 MB.
while trying to uncar i get following message:
SAPCAR: processing archive D:\SPS17\ST-SER_2008\Inst\KITLONB.SAR (version 2.01)
x EPS/in/CSR0120031469_0029513.ATT
x EPS/in/CSR0120031469_0029513.PAT
SAPCAR: error reading from D:\SPS17\ST-SER_2008\Inst\KITLONB.SAR
But the EPS files have been loaded in the system & visible in the queue as well.
The import fails in phase DISASSEMBLE with following error:
Error in phase - DISASSEMBLE
Reason for error - PATCH_FILE_READ_ERROR
Return code - 12
Error message - OCS Package : SAPKITLONB
File has Full Control given to groups Administrator, SAP_LocalAdmin and SYSTEM.
What could be the reason?Check your SAPCAR executable.
File hasn't been uncared properly. You may uncar on your desktop and then transfer to server.
Other option is to load from SAINT tool > Load > Package from Application Server > Give location and it will uncar at right place.
Thanks,
Digesh
Edited by: digeshjoshi on Aug 14, 2009 5:01 PM -
Error while running the SPAM for VIRSA Patch
Hi,
We are performing a patching over a ECC system for stack 10.
kernel : 701 - 150 level.
Initial stack :- EHP4 FOR SAP ERP 6.0/NW701 -->04
Target Stack :- EHP4 FOR SAP ERP 6.0/NW701 -->10
The import was stopped, since an error occurred during the phase DDIC_ACTIVATION,
- Error in phase: DDIC_ACTIVATION
- Reason for error: TP_STEP_FAILURE
- Return code: 0008
- Error message: OCS Package SAPK-40405INEAIPPE, tp step "A", return code 0008 an also in patch of versa.
So we have found 2 relevant sap notes 1557909 & 1315662 but unable to find the root cause.
We tried to remove table index TI, but still can't activate this table or import the patch)
Regards,is jsObj returing null?
-
Error in phase: ADD_TO_BUFFER in SPAM during import of SAPKB70017 and 18
Hello
What is problem in this case? During import of SAPKB70017 and SAPKB70018 I get following error(there is no SLOG file in /usr/sap/trans/log):
The import was stopped, since an error occurred during the phase
ADD_TO_BUFFER, which the Support Package Manager is unable to resolve
without your input.
After you have corrected the cause of the error, continue with the
import by choosing Support Package -> Import queue from the initial
screen of the Support Package Manager.
The following details help you to analyze the problem:
- Error in phase: ADD_TO_BUFFER
- Reason for error:
- Return code: 0211
- Error message:
Notes on phase ADD_TO_BUFFER
In this phase the queue is placed in the transport buffer of your
system. This phases can terminate due to the following reasons:
o TP_INTERFACE_FAILURE: The tp interface could not be called. There is
an RFC error.
o CANNOT_ADD_PATCH_TO_BUFFER: A Support Package could not be included
in the transport buffer. The program tp is trying to open a file in
the file system. For more information, refer to the SLOG log file in
the directory /usr/sap/trans/log.
A prerequisite of the Support Package Manager is that the Change and
Transport System (CTS) is configured correctly. For more detailed
information, read the online documentation available from Help -> SAP
Library -> mySAP Technology Components -> SAP Web Application Server ->
Change and Transport System .
A list of the most important SAP Notes for Online Correction Support
(OCS) is available in SAP Note 97620, which is updated regularly.Hi Jan,
First, check whether your STMS is configured properly. Next check the transport directory and the transport tool from within STMS (system -> check in menu options).
If these 2 are ok, then you might check from within the OS layer by manually adding to buffer (tp add to buffer <Request No> <SID>).
Also, I am assuming you are doing this from client 000 with a non-standard user having proper authorizations.
I believe this to be an issue of permissions at the OS layer.
Regards
Siva -
Error in phase XPRA_EXECUTION while updating the SAP_BASIS patch !4
Hi ,
I am trying to update the sap_basis patch from level 13 to 14 . While updating I am getting
Error in phase: XPRA_EXECUTION
Reason for error: TP_STEP_FAILURE
Return code: 0012
Error message: OCS Package SAPKB70014, tp step R, return code
0012
In ST22 It says Syntax error in program "CL_CLS_ATTR_VALUE_ASSIGNMENT==CP
any help would be appreciated..
Regards,
PradeepThis is what I get in the import log
The Syntax Error is given below
Execution of programs after import (XPRA)
Transport request : SAPKB70014
System : DEV
tp path : tp
Version and release: 372.04.59 700
Program terminated (job: RDDEXECL, no.: 17163300)
See job log
Execution of programs after import (XPRA)
End date and time : 20090518171648
Ended with return code: ===> 12 <===
untime Errors SYNTAX_ERROR
Date and Time 18.05.2009 17:16:34
Short text
Syntax error in program "CL_CLS_ATTR_VALUE_ASSIGNMENT==CP ".
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLCLS_AFTER_IMPORT" had to be terminated because it
has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"CL_CLS_ATTR_VALUE_ASSIGNMENT==CP " in include
"CL_CLS_ATTR_VALUE_ASSIGNMENT==CM00D " in
line 1:
"Method "GET_DETAILS_OF_ASSIGNMENT" does not exist. The following simil"
"arly-named methods do exist: "GET_DESCRIPTION_OF_ASSIGNMENT", "GET_PAC"
"KAGES_OF_ASSIGNMENTS" and "GET_CLIENT_ASSIGNMENTS"."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "SAPLCLS_AFTER_IMPORT" had to be terminated because it
has
come across a statement that unfortunately cannot be executed.
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "CL_CLS_ATTR_VALUE_ASSIGNMENT==CP
You can also perform the syntax check from the ABAP Editor.
If the problem persists, proceed as follows:
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
The following syntax error was found in the program
CL_CLS_ATTR_VALUE_ASSIGNMENT==CP :
"Method "GET_DETAILS_OF_ASSIGNMENT" does not exist. The following simil"
"arly-named methods do exist: "GET_DESCRIPTION_OF_ASSIGNMENT", "GET_PAC"
"KAGES_OF_ASSIGNMENTS" and "GET_CLIENT_ASSIGNMENTS"."
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error. -
The error in phase 'DDIC_ACTIVATION'
when i import SAPKB73102-SAPKB73113 without the error:
The import was stopped ,since an error occurred during the phase DDIC_ACTIVATION.which the support package manager is unable to reslove without your input.
after you hace corrected the cause of the error,continue with the iport by choosing support package -> import queue from the initial screen of support package manager
the following details help you to analyze the problem"
-error in phase:ddic_activation
-rease for error:tp_interface_failure
-return code
-error message
import logs of the queue
who can help me
helphi
first in the tablle PAT02 is nothing
and I was import SAP_BASIS(SAPKB73102-SAPKB73113) base sap netweaver 731 sp1 oracle 11.2 and ocs is SAPKD73150
During importing the patches TOTAL :12
SAPKB73102
SAPKB73103
SAPKB73104
SAPKB73105
SAPKB73106
SAPKB73107
SAPKB73108
SAPKB73109
SAPKB73110
SAPKB73111
SAPKB73112
SAPKB73113
and in trs spau .
than i execute it ,Also nothing:
No table entries found for specified key -
SPAM version 36 is struck in import_proper phase of Prologue for crm rel700
Hi Gurus,
While updating the spam version to 36 in crm 700, its throughing the below message. I checked tp tool, consistency check, everything seems fine.
any idea what may casue this problem, as my spam is struck in import_proper phase of Prologue
The installation was stopped, since an error occurred during the phase
IMPORT_PROPER, which the Add-On Installation Tool is unable to resolve
without your input.
After you have corrected the cause of the error, continue with the
import by choosing Continue in the queue display.
The following details help you to analyze the problem:
- Error in phase: IMPORT_PROPER
- Reason for error: TP_STEP_FAILURE
- Return code: 0008
- Error message: OCS Package ALL, tp step "6", return code 0008
Notes on phase IMPORT_PROPER
to be continuedIn this phase the system imports the Repository objects and the table
entries. The following are reasons why this phase may fail:
o TP_INTERFACE_FAILURE: The tp interface could not be called.
o TP_FAILURE: The tp program could not be executed. For more
information on this, see the SLOG or ALOG log file.
o TP_STEP_FAILURE: A tp step could not be executed. To find the cause
of the error, see the appropriate log, such as the import log.
If a tp step 6, N, or S is specified in the termination message, it
is a step that is independent of the transport request. You can vie
these logs in the log overview by choosing Import Steps Not Specifi
to Transport Request.
Alternatively, see the logs in the following files in the log
subdirectory of your transport directory (usually /usr/sap/trans/log):
- tp step 6: P<YY><MM><DD>.<SID>
- tp step N: N<YY><MM><DD>.<SID>
- tp step S: DS<YY><MM><DD>.<SID>
To display these files, use the report RSPUTPRT or transaction AL11.
The Add-On Installation Tool requires that the Change and Transport
System (CTS) be configured correctly. For more detailed information,
read the online documentation available from Help -> SAP Library ->
mySAP Technology Components -> SAP Web Application Server -> BC Change
and Transport System .
A list of the most important SAP Notes for Online Correction Support
(OCS) is available in SAP Note 97620, which is updated regularly.
Regards - Munish -
Error in phase: XPRA_EXECUTION
I am in the process of applying the latest HR support packages
and have an error in error in SAPKE60438.
error log**************************************************************************************
The following details help you to analyze the problem:
- Error in phase: XPRA_EXECUTION
- Reason for error: TP_STEP_FAILURE
- Return code: 0008
- Error message: OCS Package SAPKE60438, tp step "R", return code 0008
detailed log*********************************************************************************
BC Set HRLOCUN_T512T_S: The BC Set is not assigned to a switch
BC Set HRLOCUN_T512T_S: Procedure ended with errors
Does anyone have any suggestions of what to try next? Your input would be appreciated.
Thanks,
Inho.
Edited by: In-Ho Jun on Dec 11, 2011 12:10 PMHi All,
I understand that the solution is already described above, but just for the information
purpose ,
This is a known issue and the Note 1667851 is already released for this issue.
1667851 - XPRA_EXECUTION error with SAPKE60438 support package
I hope this information helps to all who visit the thread.
Regards,
Gaurav
Maybe you are looking for
-
Collection query for computers with windows management framework 3.0
Hi, collection query for computers with windows management framework 3.0, but I cant found a way. I cant see that it is in the inventory data for SMS_G_System_ADD_REMOVE_PROGRAMS_64.DisplayName. So any way to get computers with windows management fra
-
ITunes not showing app updates from iPhone
I did some searches and found some people that have had similar, but not exactly the same problem. My iPhone 3GS shows that I have four apps that need updating. I don't like to use my data plan for updates if I don't have to, so I prefer to update vi
-
Material conversion into APO Material?
hi experts, the characteristic for material in the BW system (0MATERIAL) is 18 characters long, and in SCM (9AMATNR u2013 here ZAMATNR) it is 40 characters long. In order to compensate for this difference, you need in the transformation from BW to SC
-
I need to write a simple XML/SVG code editor for my application. I basically want to display the contents of an XML DOM so that if the user changes the text in the editor the DOM will be updated to reflect this. What would be the best way to do this?
-
There is an intermittent buzzing on the right side of my macbook pro keyboard (near the right speaker grill). As far as I can tell it is independant of the display, cpu usage or temperature. I think it's a problem with the case because it goes away i