"es-start -c" fails
Hi,
Suddendly I'm not able anymore to login to a SunMC Server 4.0 (Patch 127683-06) via "es-start -c ". I know that it has worked with this patch and there haven't been any other patch/package installations. sunmcweb and es-cli do work without problems.
sh-3.00# /opt/SUNWsymon/sbin/es-start -c
Copyright (c) 2007 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
sh-3.00#The script starts but exits after some seconds without errors. I can't see anything in the logs. Is there a way to debug this behaviour? Using a truss didn't show any negative side effects. Restarting the Server (Software and Zone) didn't help either.
While knowing C before getting into Objective-C would be a help, Objective-C is built on C, to learn enough C for it to be a help will take a fair amount of time, time better spent just getting into Objective-C and Xcode.
For programmers that do not know C I recommend the book Programming in Objective-C (6th Edition) by Stephen G. Kochan
The book assumes no prior C knowledge and starts out writing command line programs in order to avoid the UI which can be difficult to learn at first.. What C is absolutely needed is introduced when it is required.
The last third of the book introduces the Cocoa libraries and the UI.
good luck
Similar Messages
-
SEVERE ERROR: Starting system failed, rc=0
Hi Experts
I am having problem in SRM 2.0 to SRM 5.5(NW 7) Upgrade. I have problem in startup of Shadow Instance. Here is log description.
more DEVTRACE.LOG
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 01] Wed Jan 9 17:56:30 2008
[Thr 01] WLM Tag 'ED2/MSG' successfully set for this process
[Thr 01] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 324 (IBM RS/6000 with AIX)
relno 7000
patchlevel 0
patchno 110
intno 20050900
make: multithreaded, ASCII, 64 bit, optimized
pid 4722694
*[Thr 01] **LOG Q01=> MsSInit, MSStart (Msg Server 1 4722694) [msxxserv_mt. 1824
[Thr 01] SigISetDefaultAction : default handling for signal 20
[Thr 01] load acl file = /usr/sap/put/ED2/SYS/global/ms_acl_info
[Thr 01] MsGetOwnIpAddr: my host addresses are :
[Thr 01] 2 : [127.0.0.1] localhost (LOCALHOST)
[Thr 01] HTTP logging is switch off
*[Thr 01] **LOG Q0I=> NiIBindSocket: bind (67: Address already in use) [nixxi.cp
p 3174]
*[Thr 01] *** ERROR => NiIBindSocket: SiBind failed for hdl 1 / sock 8*
(SI_EPORT_INUSE/67; I4; ST; 0.0.0.0:8100) [nixxi.cpp 3174]
*[Thr 01] *** ERROR => MsHttpCommInit: Ni2Listen(8100) (rc=NIESERV_USED) [msxxhtt*
p_mt. 3444]
*[Thr 01] *** ERROR => MsHttpPortBind: MsHttpCommInit (port=8100) [msxxhttp_mt. 3*
847]
*[Thr 01] *** HTTP port 8100 state CLOSED ****
[Thr 01] MsHttpOwnDomain: own domain[1] = ent.agt.ab.ca
[Thr 01] ms/icf_info_server : deleted
*[Thr 01] *** I listen to port sapmsSHDED2 (3605) ****
[Thr 01] CUSTOMER KEY: >N1501146322<
more STARTSFI.LOG
1 ETQ201XEntering upgrade-phase "START_SHDI_FIRST" ("20080109175630")
2 ETQ366 Connect variables are set for shadow instance access
4 ETQ399 System-nr = '01', GwService = 'sapgw01'
4 ETQ399 Environment variables:
4 ETQ399 dbs_ora_schema=SAPED2
4 ETQ399 auth_shadow_upgrade=1
4 ETQ399 Set environment for shadow connect:
4 ETQ399 ENV: dbs_ora_schema=SAPED2
4 ETQ399 ENV: auth_shadow_upgrade=1
4 ETQ399 Set RFC variables for shadow connect:
4 ETQ399 System-nr = '01', GwService = 'sapgw01'
4 ETQ399 Set tool parameters for shadow connect:
4 ETQ380 computing toolpath for request "TP_SHADOW_CONNECT"
4 ETQ381 request "TP_SHADOW_CONNECT" means "tp needs to connect to shadow system
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
4 ETQ399 default TPPARAM: SHADOW.TPP
4 ETQ380 computing toolpath for request "TP_ALWAYS_NEW"
4 ETQ381 request "TP_ALWAYS_NEW" means "always tp from DIR_PUT/exe, for phase KX
_SWITCH"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
2 ETQ399 Starting shadow instance
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
2 ETQ353 Starting system
4 ETQ399 ext. env.: DIR_LIBRARY=/usr/sap/ED2/SYS/exe/run
4 ETQ399 ext. env.: LIBPATH=/usr/sap/ED2/SYS/exe/run:/usr/lib:/lib:/usr/sap/ED2/
SYS/exe/run
4 ETQ399 2008/01/09 17:56:30: put_execute: (startsap) forkpid:9027768
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
pgw01"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2EETQ399 Starting shadow instance failed
2EETQ399 Test RFC failed finally
2EETQ399 Dialogue: ERROR
2EETQ399 Starting system failed, rc=0
You help & time in this matter will be highly appreciated.
Thanks & Regards
JigneshHi Marcus
Thanks for quick response. I did same exercise earlier. Shadow Instance started without dispatcher.
iedm3330dd:ed2adm> ps -ef | grep ED2_DVEBMGS01
ed2adm 4817018 7942216 0 09:16:45 - 0:00 ms.sapED2_DVEBMGS01 pf=/usr/s
ap/put/ED2/SYS/profile/ED2_DVEBMGS01_iedm3330dd
ed2adm 4821170 7942216 0 09:16:45 - 0:00 co.sapED2_DVEBMGS01 -F pf=/us
r/sap/put/ED2/SYS/profile/ED2_DVEBMGS01_iedm3330dd
ed2adm 4849734 7942216 0 09:16:45 - 0:00 se.sapED2_DVEBMGS01 -F pf=/us
r/sap/put/ED2/SYS/profile/ED2_DVEBMGS01_iedm3330dd
ed2adm 4853912 8847520 0 10:01:29 pts/1 0:00 grep ED2_DVEBMGS01
Log file :
iedm3330dd:ed2adm> pwd
/usr/sap/put/ED2/DVEBMGS01/work
iedm3330dd:ed2adm> more dev_disp.new
trc file: "dev_disp.new", trc level: 1, release: "700"
sysno 01
sid ED2
systemid 324 (IBM RS/6000 with AIX)
relno 7000
patchlevel 0
patchno 111
intno 20050900
make: single threaded, ASCII, 64 bit, optimized
pid 4853984
Thu Jan 10 09:16:46 2008
kernel runs with dp version 229(ext=109) (@(#) DPLIB-INT-VERSION-229)
length of sys_adm_ext is 364 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 4853984) [dpxxdisp.c 1239]
shared lib "dw_xml.so" version 111 successfully loaded
shared lib "dw_xtc.so" version 111 successfully loaded
shared lib "dw_stl.so" version 111 successfully loaded
shared lib "dw_gui.so" version 111 successfully loaded
shared lib "dw_mdm.so" version 111 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
WARNING => DpNetCheck: NiServToNo(sapdp01) failed (rc=-3)
ERROR => DpNetCheck: NiServToNo(sapgw01) failed (rc=-3) [dpxxtool2.c 5223]
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust t
he DNS settings [dpxxtool2.c 5361]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >iedm3330dd_ED2_01 <
DpShMCreate: sizeof(wp_adm) 7488 (936)
DpShMCreate: sizeof(tm_adm) 4957464 (24664)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/548040/548048
DpShMCreate: sizeof(comm_adm) 548048 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1616)
DpShMCreate: sizeof(wall_adm) (22440/36712/56/104)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 7000000000a6000, size: 5603560)
DpShMCreate: allocated sys_adm at 7000000000a6000
DpShMCreate: allocated wp_adm at 7000000000a7ba0
DpShMCreate: allocated tm_adm_list at 7000000000a98e0
DpShMCreate: allocated tm_adm at 7000000000a9940
DpShMCreate: allocated wp_ca_adm at 700000000563e58
DpShMCreate: allocated appc_ca_adm at 7000000005684a8
DpShMCreate: allocated comm_adm at 700000000569c18
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 7000000005ef8e8
DpShMCreate: allocated gw_adm at 7000000005ef968
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 7000000005ef998
DpShMCreate: allocated wall_adm at 7000000005ef9a0
MBUF state OFF
DpCommInitTable: init table for 500 entries
ERROR => DpIPCInit2: NiServToNo failed (--3) [dpxxtool2.c 511]
DP_FATAL_ERROR => DpSapEnvInit: DpIPCInit2
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jan 10 09:16:56 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Thu Jan 10 16:16:56 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl Us
er Action Table
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
0 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
1 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
2 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
3 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
4 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
5 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
6 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
7 ? -1 Free no 0 0 0
Dispatcher Queue Statistics Thu Jan 10 16:16:56 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
ERROR => DpMQueueInfo: DpQueueInfo [dpxxtool.c 1870]
Dump of tm_adm structure: Thu Jan 10 16:16:56 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Thu Jan 10 16:16:56 2008
=============================
Slots: 300, Used: 0, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jan 10 09:17:01 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >iedm3330dd_ED2_01 < (normal)
DpJ2eeDisableRestart
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10960]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10960]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10960]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10960]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10960]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10960]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10960]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10960]
Stop work processes
Terminate gui connections
wait for end of work processes
not attached to the message server
cleanup EM
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
ShmCreate( 76, 0, 2, 0x110750af0 )
ShmKeyPermission( 76 ) = 0740 (octal)
cleanup event management
cleanup shared memory/semaphores
ShmCleanup SHM_SYS_ADM_KEY
ShmCleanup( 1 )
ShmCreate( 1, 0, 2, 0xfffffffffffedf0 )
ShmProtect( 1, 3 )
ShmCreate( 1, 0, 2, -> 0x7000000000a4000 )
ShmCleanup SHM_DP_ADM_KEY
ShmCleanup( 2 )
ShmCreate( 2, 0, 2, 0xfffffffffffedf0 )
ShmProtect( 2, 3 )
ShmCreate( 2, 0, 2, -> 0x7000000000a6000 )
ShmCleanup SHM_DP_CA_KEY
ShmCleanup( 3 )
ShmCreate( 3, 0, 2, 0xfffffffffffedf0 )
ShmProtect( 3, 3 )
ShmProtect: shmat key 3 prot 3/0 done
ShmCreate( 3, 0, 2, -> 0x700000030000000 )
ShmCleanup SHM_PF_KEY
ShmCleanup( 4 )
ShmCreate( 4, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 4 ) = 0740 (octal)
ShmCleanup SHM_PRES_BUF
ShmCleanup( 14 )
ShmCreate( 14, 0, 2, 0xfffffffffffedf0 )
ShmGet( 10, 14, 0, 2, 0xfffffffffffec78 )
ShmCleanup SHM_CALI_BUFFER
ShmCleanup( 11 )
ShmCreate( 11, 0, 2, 0xfffffffffffedf0 )
ShmGet( 10, 11, 0, 2, 0xfffffffffffec78 )
ShmCleanup SHM_DB_TBUFF
ShmCleanup( 19 )
ShmCreate( 19, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 19 ) = 0740 (octal)
ShmCleanup SHM_DB_TBUFF_P
ShmCleanup( 33 )
ShmCreate( 33, 0, 2, 0xfffffffffffedf0 )
ShmGet( 10, 33, 0, 2, 0xfffffffffffec78 )
ShmCleanup SHM_DB_STBUFF
ShmCleanup( 41 )
ShmCreate( 41, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 41 ) = 0740 (octal)
ShmCleanup SHM_DB_TTBUFF
ShmCleanup( 42 )
ShmCreate( 42, 0, 2, 0xfffffffffffedf0 )
ShmGet( 40, 42, 0, 2, 0xfffffffffffec78 )
Profile configuration error detected, use temporary corrected setup
Shared Pool 40: ipc/shm_psize_40 = 68000000 (too small)
Shared Pool 40: (smaller than default 112000000)
Shared Pool 40: (default size assumed 112000000)
ShmCreate( 40, 0, 2, 0xfffffffffffea98 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_FTBUFF
ShmCleanup( 43 )
ShmCreate( 43, 0, 2, 0xfffffffffffedf0 )
ShmGet( 40, 43, 0, 2, 0xfffffffffffec78 )
ShmCreate( 40, 0, 2, 0xfffffffffffea98 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_SNTBUFF
ShmCleanup( 45 )
ShmCreate( 45, 0, 2, 0xfffffffffffedf0 )
ShmGet( 40, 45, 0, 2, 0xfffffffffffec78 )
ShmCreate( 40, 0, 2, 0xfffffffffffea98 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_IRBUFF
ShmCleanup( 44 )
ShmCreate( 44, 0, 2, 0xfffffffffffedf0 )
ShmGet( 40, 44, 0, 2, 0xfffffffffffec78 )
ShmCreate( 40, 0, 2, 0xfffffffffffea98 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_OBJ_BUFFER
ShmCleanup( 54 )
ShmCreate( 54, 0, 2, 0xfffffffffffedf0 )
ShmGet( 10, 54, 0, 2, 0xfffffffffffec78 )
ShmCleanup SHM_DB_SYNC
ShmCleanup( 46 )
ShmCreate( 46, 0, 2, 0xfffffffffffedf0 )
ShmGet( 40, 46, 0, 2, 0xfffffffffffec78 )
ShmCreate( 40, 0, 2, 0xfffffffffffea98 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_CUA_BUFFER
ShmCleanup( 47 )
ShmCreate( 47, 0, 2, 0xfffffffffffedf0 )
ShmGet( 40, 47, 0, 2, 0xfffffffffffec78 )
ShmCreate( 40, 0, 2, 0xfffffffffffea98 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_OTR_BUFFER
ShmCleanup( 64 )
ShmCreate( 64, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 64 ) = 0740 (octal)
ShmCleanup SHM_DB_ESM_BUFFER
ShmCleanup( 65 )
ShmCreate( 65, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 65 ) = 0740 (octal)
ShmCleanup SHM_ROLL_AREA_KEY
ShmCleanup( 9 )
ShmCreate( 9, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 9 ) = 0740 (octal)
ShmCleanup SHM_PAGING_AREA_KEY
ShmCleanup( 8 )
ShmCreate( 8, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 8 ) = 0740 (octal)
ShmCleanup SHM_ROLL_ADM_KEY
ShmCleanup( 17 )
ShmCreate( 17, 0, 2, 0xfffffffffffedf0 )
ShmGet( 10, 17, 0, 2, 0xfffffffffffec78 )
ShmCleanup SHM_PAGING_ADM_KEY
ShmCleanup( 18 )
ShmCreate( 18, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 18 ) = 0740 (octal)
ShmCleanup SHM_PXA_KEY
ShmCleanup( 6 )
ShmCreate( 6, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 6 ) = 0740 (octal)
ShmCleanup SHM_ENQ_TABLE_KEY
ShmCleanup( 34 )
ShmCreate( 34, 0, 2, 0xfffffffffffedf0 )
ShmGet( 10, 34, 0, 2, 0xfffffffffffec78 )
ShmCleanup SHM_ENQID_KEY
ShmCleanup( 58 )
ShmCreate( 58, 0, 2, 0xfffffffffffedf0 )
ShmGet( 10, 58, 0, 2, 0xfffffffffffec78 )
ShmCleanup SHM_VB_ADM_KEY
ShmCleanup( 7 )
ShmCreate( 7, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 7 ) = 0740 (octal)
ShmCleanup SHM_DB_POOL
ShmCleanup( 40 )
ShmCreate( 40, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_ES2_ADM
ShmCleanup( 76 )
ShmCreate( 76, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 76 ) = 0740 (octal)
ShmCleanup SHM_EM_ADM
ShmCleanup( 51 )
ShmCreate( 51, 0, 2, 0xfffffffffffedf0 )
ShmGet( 10, 51, 0, 2, 0xfffffffffffec78 )
ShmCleanup SHM_EM2_ADM
ShmCleanup( 77 )
ShmCreate( 77, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 77 ) = 0740 (octal)
ShmCleanup SHM_EG2_ADM
ShmCleanup( 78 )
ShmCreate( 78, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 78 ) = 0740 (octal)
ShmCleanup SHM_MSBUF
ShmCleanup( 52 )
ShmCreate( 52, 0, 2, 0xfffffffffffedf0 )
ShmProtect( 52, 3 )
ShmCreate( 52, 0, 2, -> 0x700000000600000 )
ShmCleanup SHM_THRUN_ADM_KEY(th run adm)
ShmCleanup( 30 )
ShmCreate( 30, 0, 2, 0xfffffffffffedf0 )
ShmGet( 10, 30, 0, 2, 0xfffffffffffec78 )
ShmCleanup SHM_JAVA
ShmCleanup( 70 )
ShmCreate( 70, 0, 2, 0xfffffffffffedf0 )
ShmKeyPermission( 70 ) = 0740 (octal)
ShmCleanup SHM_PF_AS_KEY(Appl.Statistics)
ShmCleanup( 56 )
ShmCreate( 56, 0, 2, 0xfffffffffffedf0 )
ShmGet( 10, 56, 0, 2, 0xfffffffffffec78 )
ShmCleanup SHM_POOL_0
ShmCleanup( 10 )
ShmCreate( 10, 0, 2, 0xfffffffffffedf0 )
ShmProtect( 10, 3 )
ShmCreate( 10, 0, 2, -> 0x700000000000000 )
ShmCleanup SHM_PROFILE
ShmCleanup( 57 )
ShmCreate( 57, 0, 2, 0xfffffffffffedf0 )
ShmGet( 10, 57, 0, 2, 0xfffffffffffec78 )
ShmCreate( 10, 0, 2, 0xfffffffffffea98 )
ShmKeyPermission( 10 ) = 0740 (octal)
MiCleanup:
ShmCleanup( 62 )
ShmCreate( 62, 0, 2, 0xfffffffffffed60 )
ShmKeyPermission( 62 ) = 0740 (octal)
ERROR => ShmCleanup(62) failed 3 [mpixx.c 3239]
MpiCleanup() -> 1
removing Semaphore-Management
removing request queue
ShmCleanup( 31 )
ShmCreate( 31, 0, 2, 0xfffffffffffed70 )
ShmGet( 10, 31, 0, 2, 0xfffffffffffebf8 )
ShmCreate( 10, 0, 2, 0xfffffffffffea18 )
ShmKeyPermission( 10 ) = 0740 (octal)
ERROR => DpRqIQRemove: ShmDelete [dpxxqueu.c 431]
closing connect handles (dgm + tcp)
***LOG Q05=> DpHalt, DPStop ( 4853984) [dpxxdisp.c 10631]
shutdown completed - server stopped ***
I have already requested for port entry change in services file.
Jignesh -
Hi. I have a MacBook Pro with OS10.6.8 and cannot get internet pages to load on my WiFi network at home. My iMac, iPhone and iPad all work on this network. It is connected to the net as dropbox registers a connection and so does skype. I can connect to the WiFi in work and on other networks when travelling. However, some other networks are now starting to fail. Can anyone suggets how I can fix it, as the MBP appears to be fine, its updated with all the latest versions of software and the WiFi network is also fine....just not with my MBP??
Hi. I have a MacBook Pro with OS10.6.8 and cannot get internet pages to load on my WiFi network at home. My iMac, iPhone and iPad all work on this network. It is connected to the net as dropbox registers a connection and so does skype. I can connect to the WiFi in work and on other networks when travelling. However, some other networks are now starting to fail. Can anyone suggets how I can fix it, as the MBP appears to be fine, its updated with all the latest versions of software and the WiFi network is also fine....just not with my MBP??
-
Trying to use a new, larger external hard drive for my Time Machine backup. However, every time I start the backup, it gets started then fails. And, I can't delete the few files that did save on the external. Sort of a catch 22. Any ideas?
Is it a USB hard drive? USB hard drives have the problem of not giving full speed if they are hooked up on the same bus as keyboards and mice. Double check your profiler to make sure that is not a problem. If it is Firewire, make sure there aren't other firewire devices in use at the same time. I recommend not only keeping a Time Machine backup, but also a clone, and if you do use Time Machine, to make sure the Time Machine drive or partition is at least twice the size of the original drive.
-
I'm using Oracle Linux 6u6. While I'm installing openstack ( 2 node set up) using packstack, I'm getting this error:
Applying 10.245.33.37_cinder.pp
10.245.33.37_keystone.pp: [ ERROR ]
Applying Puppet manifests [ ERROR ]
ERROR : Error appeared during Puppet run: 10.245.33.37_keystone.pp
Error: Could not start Service[keystone]: Execution of '/sbin/service openstack-keystone start' returned 1: Starting keystone: [FAILED]
You will find full trace in log /var/tmp/packstack/20150327-100335-ltC8Ic/manifests/10.245.33.37_keystone.pp.log
Please check log file /var/tmp/packstack/20150327-100335-ltC8Ic/openstack-setup.log for more information
Additional information:
* A new answerfile was created in: /root/packstack-answers-20150327-100336.txt
* Time synchronization installation was skipped. Please note that unsynchronized time on server instances might be problem for some OpenStack components.
* Did not create a cinder volume group, one already existed
* File /root/keystonerc_admin has been created on OpenStack client host 10.245.33.37. To use the command line tools you need to source the file.
* To access the OpenStack Dashboard browse to http://10.245.33.37/dashboard .
Please, find your login credentials stored in the keystonerc_admin in your home directory.
Packages:
[root@slcai461 ~]# rpm -qa|grep keystone
python-keystoneclient-0.9.0-5.el6.noarch
python-keystone-2014.1.3-2.el6.noarch
openstack-keystone-2014.1.3-2.el6.noarch
[root@slcai461 ~]# rpm -qa|grep packstack
openstack-packstack-puppet-2014.1.1-0.12.dev1068.0.4.el6.noarch
openstack-packstack-2014.1.1-0.12.dev1068.0.4.el6.noarch
Log :
[root@slcai461 ~]# cat /var/tmp/packstack/20150327-100335-ltC8Ic/manifests/10.245.33.37_keystone.pp.log
Warning: Config file /etc/puppet/hiera.yaml not found, using Hiera defaults
Warning: Scope(Class[Keystone]): The sql_connection parameter is deprecated, use database_connection instead.
Warning: Scope(Class[Keystone]): token_format parameter is deprecated. Use token_provider instead.
Warning: Scope(Class[Keystone::Endpoint]): The public_address parameter is deprecated, use public_url instead.
Warning: Scope(Class[Keystone::Endpoint]): The internal_address parameter is deprecated, use internal_url instead.
Warning: Scope(Class[Keystone::Endpoint]): The admin_address parameter is deprecated, use admin_url instead.
Warning: Scope(Class[Nova::Keystone::Auth]): The cinder parameter is deprecated and has no effect.
Notice: Compiled catalog for slcai461.us.oracle.com in environment production in 1.60 seconds
Warning: The package type's allow_virtual parameter will be changing its default value from false to true in a future release. If you do not want to allow virtual packages, please explicitly set allow_virtual to false.
(at /usr/lib/ruby/site_ruby/1.8/puppet/type.rb:816:in `set_default')
Notice: /Stage[main]/Keystone/Keystone_config[DEFAULT/admin_token]/value: value changed '[old secret redacted]' to '[new secret redacted]'
Notice: /Stage[main]/Keystone/Keystone_config[database/connection]/value: value changed '[old secret redacted]' to '[new secret redacted]'
Notice: /Stage[main]/Keystone::Db::Sync/Exec[keystone-manage db_sync]: Triggered 'refresh' from 3 events
Notice: /Stage[main]/Keystone/Exec[keystone-manage pki_setup]: Triggered 'refresh' from 2 events
Error: Could not start Service[keystone]: Execution of '/sbin/service openstack-keystone start' returned 1: Starting keystone: [FAILED]
Wrapped exception:
Execution of '/sbin/service openstack-keystone start' returned 1: Starting keystone: [FAILED]
Error: /Stage[main]/Keystone::Service/Service[keystone]/ensure: change from stopped to running failed: Could not start Service[keystone]: Execution of '/sbin/service openstack-keystone start' returned 1: Starting keystone: [FAILED]
Notice: /Stage[main]/Keystone::Service/Service[keystone]: Triggered 'refresh' from 5 events
Notice: /Stage[main]/Neutron::Keystone::Auth/Keystone_service[neutron]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Neutron::Keystone::Auth/Keystone_service[neutron]: Skipping because of failed dependencies
Notice: /Stage[main]/Keystone::Roles::Admin/Keystone_tenant[admin]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Keystone::Roles::Admin/Keystone_tenant[admin]: Skipping because of failed dependencies
Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_service[nova_ec2]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_service[nova_ec2]: Skipping because of failed dependencies
Notice: /Stage[main]/Cinder::Keystone::Auth/Keystone_service[cinderv2]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Cinder::Keystone::Auth/Keystone_service[cinderv2]: Skipping because of failed dependencies
Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_service[novav3]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_service[novav3]: Skipping because of failed dependencies
Notice: /Stage[main]/Keystone::Roles::Admin/Keystone_tenant[services]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Keystone::Roles::Admin/Keystone_tenant[services]: Skipping because of failed dependencies
Notice: /Stage[main]/Neutron::Keystone::Auth/Keystone_user[neutron]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Neutron::Keystone::Auth/Keystone_user[neutron]: Skipping because of failed dependencies
Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_user[nova]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_user[nova]: Skipping because of failed dependencies
Notice: /Stage[main]/Glance::Keystone::Auth/Keystone_user[glance]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Glance::Keystone::Auth/Keystone_user[glance]: Skipping because of failed dependencies
Notice: /Stage[main]/Keystone::Roles::Admin/Keystone_role[admin]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Keystone::Roles::Admin/Keystone_role[admin]: Skipping because of failed dependencies
Notice: /Stage[main]/Glance::Keystone::Auth/Keystone_user_role[glance@services]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Glance::Keystone::Auth/Keystone_user_role[glance@services]: Skipping because of failed dependencies
Notice: /Stage[main]/Keystone::Endpoint/Keystone_service[keystone]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Keystone::Endpoint/Keystone_service[keystone]: Skipping because of failed dependencies
Error: Could not prefetch keystone_endpoint provider 'keystone': Execution of '/usr/bin/keystone --os-endpoint http://127.0.0.1:35357/v2.0/ endpoint-list' returned 1: An unexpected error prevented the server from fulfilling your request. (HTTP 500)
Notice: /Stage[main]/Keystone::Endpoint/Keystone_endpoint[RegionOne/keystone]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Keystone::Endpoint/Keystone_endpoint[RegionOne/keystone]: Skipping because of failed dependencies
Notice: /Stage[main]/Main/Keystone_service[cinder_v2]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Main/Keystone_service[cinder_v2]: Skipping because of failed dependencies
Notice: /Stage[main]/Main/Keystone_endpoint[RegionOne/cinder_v2]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Main/Keystone_endpoint[RegionOne/cinder_v2]: Skipping because of failed dependencies
Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_endpoint[RegionOne/novav3]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_endpoint[RegionOne/novav3]: Skipping because of failed dependencies
Notice: /Stage[main]/Cinder::Keystone::Auth/Keystone_service[cinder]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Cinder::Keystone::Auth/Keystone_service[cinder]: Skipping because of failed dependencies
Notice: /Stage[main]/Cinder::Keystone::Auth/Keystone_endpoint[RegionOne/cinder]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Cinder::Keystone::Auth/Keystone_endpoint[RegionOne/cinder]: Skipping because of failed dependencies
Notice: /Stage[main]/Glance::Keystone::Auth/Keystone_service[glance]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Glance::Keystone::Auth/Keystone_service[glance]: Skipping because of failed dependencies
Notice: /Stage[main]/Glance::Keystone::Auth/Keystone_endpoint[RegionOne/glance]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Glance::Keystone::Auth/Keystone_endpoint[RegionOne/glance]: Skipping because of failed dependencies
Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_user_role[nova@services]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_user_role[nova@services]: Skipping because of failed dependencies
Notice: /Stage[main]/Keystone::Roles::Admin/Keystone_user[admin]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Keystone::Roles::Admin/Keystone_user[admin]: Skipping because of failed dependencies
Notice: /Stage[main]/Keystone::Roles::Admin/Keystone_user_role[admin@admin]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Keystone::Roles::Admin/Keystone_user_role[admin@admin]: Skipping because of failed dependencies
Notice: /Stage[main]/Cinder::Keystone::Auth/Keystone_user[cinder]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Cinder::Keystone::Auth/Keystone_user[cinder]: Skipping because of failed dependencies
Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_endpoint[RegionOne/nova_ec2]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_endpoint[RegionOne/nova_ec2]: Skipping because of failed dependencies
Notice: /Stage[main]/Cinder::Keystone::Auth/Keystone_endpoint[RegionOne/cinderv2]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Cinder::Keystone::Auth/Keystone_endpoint[RegionOne/cinderv2]: Skipping because of failed dependencies
Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_service[nova]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_service[nova]: Skipping because of failed dependencies
Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_endpoint[RegionOne/nova]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_endpoint[RegionOne/nova]: Skipping because of failed dependencies
Notice: /Stage[main]/Neutron::Keystone::Auth/Keystone_user_role[neutron@services]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Neutron::Keystone::Auth/Keystone_user_role[neutron@services]: Skipping because of failed dependencies
Notice: /Stage[main]/Neutron::Keystone::Auth/Keystone_endpoint[RegionOne/neutron]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Neutron::Keystone::Auth/Keystone_endpoint[RegionOne/neutron]: Skipping because of failed dependencies
Notice: /Stage[main]/Cinder::Keystone::Auth/Keystone_user_role[cinder@services]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Cinder::Keystone::Auth/Keystone_user_role[cinder@services]: Skipping because of failed dependencies
Notice: Finished catalog run in 3.10 seconds
Please let me know how to fix this.This problem connected with proxy-setings.
As the first steps you should try:
1. export system env variable:
http_proxy=http://www-proxy.ru.oracle.com:80
https_proxy=https://www-proxy.ru.oracle.com:80
no_proxy=127.0.0.1,localhost
and you can also export
export OS_TENANT_NAME=admin
export OS_USERNAME=admin
export OS_PASSWORD=root
export OS_AUTH_URL=http://<conntroller_IP>:5000/v2.0/
2. and than restart mysqld, if it is running, stop iptables and repeat installation process from beginning with the currently generated answer file
if we are exporting variable OS_PASSWORD, its value should be the same as value for CONFIG_KEYSTONE_ADMIN_PW in the currently generated answer file.
This OS_PASSWORD will be written by packstack in the /root/keystonerc_admin file and will be used as admin's password for login to Openstack dashboard. -
I am unable to backup my iphone 5 iOS 6.0.1 (connected directly to laptop USB) with my itunes 11 for Win 7 64bits. The process starts and fails to complete giving the error: itunes could not complete backup of iphone because iphone disconnected.
I have restarted the PC, the iphone, changed the lightining cable and nothign resolves it: backup never completes.Hi, I disabled the antivirus and the firewall. Same result
I even deleted the backup folder inside C:\Users\...\Apple Computer\MobileSync\Backup to eliminate any corruption in the old backup files.
Nothing changed: Session either times out or i get the same error message: itunes could not back up iphone because iphone disconnected. It always happens during step 3 out of 4 which is "transfering purchased apps from iphone to PC" and comes after step 2 which is backup.
My iphone 5 is not jailbroken, and is a factory unlocked phone.
Any other suggestion?
Pls help -
Hello guys,
I have been setting a production system with bitronix transaction manager, SQL server 2008, XA transactions and jetty 6. In the beginning this software was configured to run with MySQL. But one of my customer decided to move everything to MSSQL server 2008.
In that moment I was trying to get this up and running for some weeks (The configuration was completely different) and finally I got it.
The configuration with MSSQL server was running perfectly during 1 month but then from one day to other the error message I will show now appeared and I do not how to solve it. I almost read all the hints from google about this exception but nothing helped
me out.
I hope you guys can help me to find a way to solve it.
- I tried different version of the jdbc driver 3.0 and 4.0.
- I tried to export exactly the database to my localserver and it's running perfectly with the same configuration.
The problem is that I cannot reproduce the error in other place that is not the customer and at the same time I have no access to their internal database server. They installed all the XA transaction stuff (dll in binn, enable XA, and grant the permissions
for SQLXAUser), I am quite sure because it was running for one month without any problem.
I asked to the customer if anything happenend on their server (microsoft updates, machines reboot, ...) but nothing of these happened.
Also I tried this link out but did not help me.
<a href="http://social.msdn.microsoft.com/Forums/sqlserver/en-US/15c1e6f5-ec1e-4376-8f45-25e61ffc1306/the-function-start-has-failed-no-transaction-cookie-was-returned?forum=sqldataaccess">http://social.msdn.microsoft.com/Forums/sqlserver/en-US/15c1e6f5-ec1e-4376-8f45-25e61ffc1306/the-function-start-has-failed-no-transaction-cookie-was-returned?forum=sqldataaccess</a>
The exception is the following:
[2014-05-15 14:06:08,842] INFO 3666[main] - org.mortbay.log.Slf4jLog.info(Slf4jLog.java:67) - Starting Bitronix Transaction Manager
[2014-05-15 14:06:08,951] INFO 3775[main] - org.mortbay.log.Slf4jLog.info(Slf4jLog.java:67) - Extract ./webapps/myscript-fpp-wrapper-server.war to D:\Temp\Jetty_0_0_0_0_8080_myscript.fpp.wrapper.server.war__myscript.form.wrapper.server__.bnwnn7\webapp
[2014-05-15 14:06:10,324] INFO 5148[main] - org.mortbay.log.Slf4jLog.info(Slf4jLog.java:67) - NO JSP Support for /myscript-form-wrapper-server, did not find org.apache.jasper.servlet.JspServlet
[2014-05-15 14:06:12,742] WARN 7566[main] - org.dozer.config.GlobalSettings.loadGlobalSettings(GlobalSettings.java:118) - Dozer configuration file not found: dozer.properties. Using defaults for all Dozer global properties.
[2014-05-15 14:06:13,288] WARN 8112[main] - org.hibernate.util.JDBCExceptionReporter.logExceptions(JDBCExceptionReporter.java:100) - SQL Error: 0, SQLState: null
[2014-05-15 14:06:13,288]ERROR 8112[main] - org.hibernate.util.JDBCExceptionReporter.logExceptions(JDBCExceptionReporter.java:101) - error enlisting a JdbcConnectionHandle of a JdbcPooledConnection from datasource fppDataSource in state ACCESSIBLE with
usage count 1 wrapping SQLServerXAConnection:1 on ProxyConnectionID:1
[2014-05-15 14:06:13,319]ERROR 8143[main] - org.springframework.web.context.ContextLoader.initWebApplicationContext(ContextLoader.java:220) - Context initialization failed
org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'moduleRegistration' defined in class path resource [com/visionobjects/myscript/fpp/wrapper/module-registration.xml]: Invocation of init method failed; nested exception is
org.hibernate.exception.GenericJDBCException: could not execute query
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1420)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:519)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:456)
at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:291)
at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222)
at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:288)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:190)
at org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(DefaultListableBeanFactory.java:580)
at org.springframework.context.support.AbstractApplicationContext.finishBeanFactoryInitialization(AbstractApplicationContext.java:895)
at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:425)
at org.springframework.web.context.ContextLoader.createWebApplicationContext(ContextLoader.java:276)
at org.springframework.web.context.ContextLoader.initWebApplicationContext(ContextLoader.java:197)
at org.springframework.web.context.ContextLoaderListener.contextInitialized(ContextLoaderListener.java:47)
at org.mortbay.jetty.handler.ContextHandler.startContext(ContextHandler.java:549)
at org.mortbay.jetty.servlet.Context.startContext(Context.java:136)
at org.mortbay.jetty.webapp.WebAppContext.startContext(WebAppContext.java:1282)
at org.mortbay.jetty.handler.ContextHandler.doStart(ContextHandler.java:518)
at org.mortbay.jetty.webapp.WebAppContext.doStart(WebAppContext.java:499)
at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:50)
at org.mortbay.jetty.handler.HandlerCollection.doStart(HandlerCollection.java:152)
at org.mortbay.jetty.handler.ContextHandlerCollection.doStart(ContextHandlerCollection.java:156)
at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:50)
at org.mortbay.jetty.handler.HandlerWrapper.doStart(HandlerWrapper.java:130)
at org.mortbay.jetty.Server.doStart(Server.java:224)
at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:50)
at org.mortbay.xml.XmlConfiguration.main(XmlConfiguration.java:985)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.mortbay.start.Main.invokeMain(Main.java:194)
at org.mortbay.start.Main.start(Main.java:534)
at org.mortbay.start.Main.start(Main.java:441)
at org.mortbay.start.Main.main(Main.java:119)
Caused by: org.hibernate.exception.GenericJDBCException: could not execute query
at org.hibernate.exception.SQLStateConverter.handledNonSpecificException(SQLStateConverter.java:126)
at org.hibernate.exception.SQLStateConverter.convert(SQLStateConverter.java:114)
at org.hibernate.exception.JDBCExceptionHelper.convert(JDBCExceptionHelper.java:66)
at org.hibernate.loader.Loader.doList(Loader.java:2235)
at org.hibernate.loader.Loader.listIgnoreQueryCache(Loader.java:2129)
at org.hibernate.loader.Loader.list(Loader.java:2124)
at org.hibernate.loader.criteria.CriteriaLoader.list(CriteriaLoader.java:118)
at org.hibernate.impl.SessionImpl.list(SessionImpl.java:1597)
at org.hibernate.impl.CriteriaImpl.list(CriteriaImpl.java:306)
at org.hibernate.impl.CriteriaImpl.uniqueResult(CriteriaImpl.java:328)
at com.visionobjects.myscript.fpp.form.dao.impl.ModuleInfoDaoImpl.getModuleInfo(ModuleInfoDaoImpl.java:57)
at com.visionobjects.myscript.fpp.ModuleRegistration$1.doInTransactionWithoutResult(ModuleRegistration.java:73)
at org.springframework.transaction.support.TransactionCallbackWithoutResult.doInTransaction(TransactionCallbackWithoutResult.java:33)
at org.springframework.transaction.support.TransactionTemplate.execute(TransactionTemplate.java:130)
at com.visionobjects.myscript.fpp.ModuleRegistration.init(ModuleRegistration.java:66)
at com.visionobjects.myscript.fpp.ModuleRegistration.start(ModuleRegistration.java:60)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.invokeCustomInitMethod(AbstractAutowireCapableBeanFactory.java:1544)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.invokeInitMethods(AbstractAutowireCapableBeanFactory.java:1485)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1417)
... 33 more
Caused by: java.sql.SQLException: error enlisting a JdbcConnectionHandle of a JdbcPooledConnection from datasource fppDataSource in state ACCESSIBLE with usage count 1 wrapping SQLServerXAConnection:1 on ProxyConnectionID:1
at bitronix.tm.resource.jdbc.JdbcConnectionHandle.enlistResource(JdbcConnectionHandle.java:86)
at bitronix.tm.resource.jdbc.JdbcConnectionHandle.prepareStatement(JdbcConnectionHandle.java:243)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at bitronix.tm.resource.jdbc.BaseProxyHandlerClass.invoke(BaseProxyHandlerClass.java:63)
at $Proxy29.prepareStatement(Unknown Source)
at org.hibernate.jdbc.AbstractBatcher.getPreparedStatement(AbstractBatcher.java:534)
at org.hibernate.jdbc.AbstractBatcher.getPreparedStatement(AbstractBatcher.java:452)
at org.hibernate.jdbc.AbstractBatcher.prepareQueryStatement(AbstractBatcher.java:161)
at org.hibernate.loader.Loader.prepareQueryStatement(Loader.java:1577)
at org.hibernate.loader.Loader.doQuery(Loader.java:696)
at org.hibernate.loader.Loader.doQueryAndInitializeNonLazyCollections(Loader.java:259)
at org.hibernate.loader.Loader.doList(Loader.java:2232)
... 52 more
Caused by: bitronix.tm.internal.BitronixSystemException: cannot enlist an XAResourceHolderState with uniqueName=fppDataSource XAResource= XAResourceID:1 with XID a Bitronix XID [6A657474792D6670702D73657276657200000145FFC68B9B00000000 : 6A657474792D6670702D73657276657200000145FFC68BCA00000002],
error=XAER_RMERR
at bitronix.tm.BitronixTransaction.enlistResource(BitronixTransaction.java:100)
at bitronix.tm.resource.common.TransactionContextHelper.enlistInCurrentTransaction(TransactionContextHelper.java:70)
at bitronix.tm.resource.jdbc.JdbcConnectionHandle.enlistResource(JdbcConnectionHandle.java:84)
... 66 more
<b>Caused by: javax.transaction.xa.XAException: com.microsoft.sqlserver.jdbc.SQLServerException: The function START: has failed. No transaction cookie was returned </b>
at com.microsoft.sqlserver.jdbc.SQLServerXAResource.DTC_XA_Interface(SQLServerXAResource.java:642)
at com.microsoft.sqlserver.jdbc.SQLServerXAResource.start(SQLServerXAResource.java:674)
at bitronix.tm.internal.XAResourceHolderState.start(XAResourceHolderState.java:211)
at bitronix.tm.internal.XAResourceManager.enlist(XAResourceManager.java:108)
at bitronix.tm.BitronixTransaction.enlistResource(BitronixTransaction.java:93)
... 68 more
I think the "bold" exception is the key.
Also the configuration file of my jetty server.
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE Configure PUBLIC "-//Mort Bay Consulting//DTD Configure//EN" "http://jetty.mortbay.org/configure.dtd">
<!-- developpment jetty configuration -->
<!-- launch with main class : org.mortbay.start.Main app arguments:
deploy-conf/jetty-conf/mysql/jetty-dev.xml vm arguments : -Xmx1024M -DSTOP.KEY=stop
-DSTOP.PORT=6669 to stop : - - stop -Xmx1024M -DSTOP.KEY=stop -DSTOP.PORT=6669 -->
<Configure id="Server" class="org.mortbay.jetty.Server">
<Array id="plusConfig" type="java.lang.String">
<Item>org.mortbay.jetty.webapp.WebInfConfiguration</Item>
<Item>org.mortbay.jetty.plus.webapp.EnvConfiguration</Item>
<Item>org.mortbay.jetty.plus.webapp.Configuration</Item>
<Item>org.mortbay.jetty.webapp.JettyWebXmlConfiguration</Item>
<Item>org.mortbay.jetty.webapp.TagLibConfiguration</Item>
</Array>
<Array id="serverClasses" type="java.lang.String">
</Array>
<Array id="systemClasses" type="java.lang.String">
</Array>
<!-- web apps -->
<Set name="handler">
<New id="handlerContext" class="org.mortbay.jetty.handler.ContextHandlerCollection">
<Set name="handlers">
<Array id="handlerArray" type="org.mortbay.jetty.webapp.WebAppContext">
<!-- wrapper server -->
<Item>
<New class="org.mortbay.jetty.webapp.WebAppContext">
<Arg>./webapps/myscript-fpp-wrapper-server.war</Arg>
<Arg>/myscript-form-wrapper-server</Arg>
<Set name="serverClasses">
<Ref id="serverClasses" />
</Set>
<Set name="ConfigurationClasses">
<Ref id="plusConfig" />
</Set>
</New>
</Item>
<!-- form server -->
<Item>
<New class="org.mortbay.jetty.webapp.WebAppContext">
<Arg>./webapps/myscript-fpp-form-server.war
</Arg>
<Arg>/myscript-form-server</Arg>
<Set name="serverClasses">
<Ref id="serverClasses" />
</Set>
<Set name="ConfigurationClasses">
<Ref id="plusConfig" />
</Set>
</New>
</Item>
<!-- hwr server -->
<Item>
<New class="org.mortbay.jetty.webapp.WebAppContext">
<Arg>./webapps/myscript-fpp-hwr-server.war</Arg>
<Arg>/myscript-form-hwr-server</Arg>
<Set name="serverClasses">
<Ref id="serverClasses" />
</Set>
<Set name="ConfigurationClasses">
<Ref id="plusConfig" />
</Set>
</New>
</Item>
</Array>
</Set>
</New>
</Set>
<Call name="addConnector">
<Arg>
<New class="org.mortbay.jetty.nio.SelectChannelConnector">
<Set name="port">8080</Set>
</New>
</Arg>
</Call>
<!-- Use the jdk 1.5 platformMBeanServer -->
<Call id="MBeanServer" class="java.lang.management.ManagementFactory"
name="getPlatformMBeanServer" />
<Get id="Container" name="container">
<Call name="addEventListener">
<Arg>
<New class="org.mortbay.management.MBeanContainer">
<Arg>
<Ref id="MBeanServer" />
</Arg>
<Call name="start" />
</New>
</Arg>
</Call>
</Get>
<!-- Setup the RMIRegistry on a specific port -->
<Call id="rmiRegistry" class="java.rmi.registry.LocateRegistry"
name="createRegistry">
<Arg type="int">2099</Arg>
</Call>
<!-- Setup the JMXConnectorServer on a specific rmi server port -->
<Call id="jmxConnectorServer" class="javax.management.remote.JMXConnectorServerFactory"
name="newJMXConnectorServer">
<Arg>
<New class="javax.management.remote.JMXServiceURL">
<Arg>service:jmx:rmi://localhost:2100/jndi/rmi://localhost:2099/jmxrmi
</Arg>
</New>
</Arg>
<Arg />
<Arg>
<Ref id="MBeanServer" />
</Arg>
<Call name="start" />
</Call>
<!--************************* -->
<!-- embbeded ActiveMQ Broker -->
<!--************************* -->
<New id="brokerService" class="org.apache.activemq.broker.BrokerService">
<Set name="brokerName">fppBrokerActiveMQ</Set>
<Set name="dataDirectoryFile"></Set>
<Call name="getSystemUsage">
<Call name="getMemoryUsage">
<Set name="limit">26428800</Set>
</Call>
<Call name="getStoreUsage">
<Set name="limit">204857600</Set>
</Call>
</Call>
<Call name="addConnector">
<Arg>nio://localhost:61615</Arg>
</Call>
<Call name="start"></Call>
</New>
<!-- ************************** -->
<!-- common fpp jndi resources -->
<!-- ************************** -->
<!-- ui debug properties -->
<New id="fpp.common-ui.velocityProperties" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/fpp.common-ui.velocityProperties</Arg>
<Arg>
<New class="java.util.Properties">
<Put name="spring.resource.loader.class">org.springframework.ui.velocity.SpringResourceLoader
</Put>
<Put name="spring.resource.loader.cache">false</Put>
<Put name="velocimacro.library.autoreload">true</Put>
</New>
</Arg>
</New>
<New id="fpp.wrapper-server.properties" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/fpp.wrapper-server.properties</Arg>
<Arg>
<New class="java.util.Properties">
<Put name="fpp.wrapper-server.instanceServiceWsdlLocation">http://localhost:8080/myscript-form-server/cxf/instance?wsdl
</Put>
<Put name="fpp.wrapper-server.formServiceWsdlLocation">http://localhost:8080/myscript-form-server/cxf/form?wsdl
</Put>
<Put name="fpp.wrapper-server.formDeprecatedServiceWsdlLocation">http://localhost:8080/myscript-form-server/cxf/formDeprecated?wsdl
</Put>
<Put name="fpp.wrapper-server.hwrResourceServiceWsdlLocation">http://localhost:8080/myscript-form-server/cxf/hwrResource?wsdl
</Put>
<Put name="fpp.wrapper-server.defaultEnvironmentName">default</Put>
<Put name="fpp.wrapper-server.defaultEnvironmentType">STANDARD</Put>
<Put name="fpp.wrapper-server.formdb.dialect">org.hibernate.dialect.SQLServerDialect</Put>
<Put name="fpp.wrapper-server.formdb.hibernate.show_sql">true</Put>
<Put name="fpp.wrapper-server.formdb.hibernate.transaction.factory_class">org.hibernate.transaction.JTATransactionFactory</Put>
<Put name="fpp.wrapper-server.formdb.hibernate.transaction.manager_lookup_class">org.hibernate.transaction.BTMTransactionManagerLookup</Put>
<Put name="fpp.wrapper-server.formdb.hibernate.cache.use_query_cache">false</Put>
<Put name="fpp.wrapper-server.formdb.hibernate.cache.use_second_level_cache">false</Put>
<Put name="fpp.wrapper-server.formdb.hibernate.cache.use_structured_cache">false</Put>
<Put name="fpp.wrapper-server.formdb.hibernate.cache.provider_class">org.hibernate.cache.NoCacheProvider</Put>
</New>
</Arg>
</New>
<!-- transaction manager - bitronix -->
<Call name="getConfiguration" class="bitronix.tm.TransactionManagerServices">
<Set name="serverId">jetty-fpp-server</Set>
<Set name="gracefulShutdownInterval">45</Set>
<Set name="logPart1Filename">btm/btm1.tlog</Set>
<Set name="logPart2Filename">btm/btm2.tlog</Set>
</Call>
<Set name="gracefulShutdown">60000</Set>
<Call name="addLifeCycle">
<Arg>
<New class="bitronix.tm.integration.jetty6.BTMLifeCycle" />
</Arg>
</Call>
<New class="org.mortbay.jetty.plus.naming.Transaction">
<Arg>
<Call name="getTransactionManager" class="bitronix.tm.TransactionManagerServices" />
</Arg>
</New>
<New class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>java:/TransactionManager</Arg>
<Arg>
<Call name="getTransactionManager" class="bitronix.tm.TransactionManagerServices" />
</Arg>
</New>
<New id="userTransactionManager" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>java:comp/TransactionManager</Arg>
<Arg>
<Call name="getTransactionManager" class="bitronix.tm.TransactionManagerServices" />
</Arg>
</New>
<New id="userTransactionManager" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>java:comp/UserTransaction</Arg>
<Arg>
<Call name="getTransactionManager" class="bitronix.tm.TransactionManagerServices" />
</Arg>
</New>
<!-- database data source -->
<New id="fppDataSource" class="bitronix.tm.resource.jdbc.PoolingDataSource">
<Set name="uniqueName">fppDataSource</Set>
<Set name="className">com.microsoft.sqlserver.jdbc.SQLServerXADataSource</Set>
<Set name="minPoolSize">0</Set>
<Set name="maxPoolSize">50</Set>
<Get name="driverProperties">
<Put name="serverName">DYHVDB01</Put>
<Put name="instanceName">ALPHA</Put>
<Put name="integratedSecurity">false</Put>
<Put name="databaseName">tdb_digipen_fpp</Put>
<Put name="user">manage_digipen</Put>
<Put name="password">5T1fte?</Put>
<!--Needed to test??<Put name="pinGlobalTxToPhysicalConnection">true</Put>-->
</Get>
<Call name="init" />
</New>
<!-- Jms connection factories -->
<New id="fppServerConnectionFactory" class="bitronix.tm.resource.jms.PoolingConnectionFactory">
<Set name="className">org.apache.activemq.ActiveMQXAConnectionFactory</Set>
<Set name="uniqueName">fppServerConnectionFactory</Set>
<Set name="minPoolSize">4</Set>
<Set name="maxPoolSize">40</Set>
<Set name="allowLocalTransactions">true</Set>
<Get name="driverProperties">
<Put name="brokerURL">nio://localhost:61615?jms.prefetchPolicy.all=50</Put>
<New class="org.apache.activemq.RedeliveryPolicy">
<Set name="maximumRedeliveries">-1</Set>
<Set name="backOffMultiplier">2</Set>
</New>
</Get>
<Call name="init" />
</New>
<!-- JMS Queues & topics -->
<New id="formNotifiationTopic" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>fpp/formNotifiationTopic</Arg>
<Arg>
<New class="org.apache.activemq.command.ActiveMQTopic">
<Arg>formNotifiationTopic</Arg>
</New>
</Arg>
</New>
<New id="fieldJmsQueue" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>fpp/fieldJmsQueue</Arg>
<Arg>
<New class="org.apache.activemq.command.ActiveMQQueue">
<Arg>fieldJmsQueue</Arg>
</New>
</Arg>
</New>
<New id="fieldNotifJmsQueue" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>fpp/fieldNotifJmsQueue</Arg>
<Arg>
<New class="org.apache.activemq.command.ActiveMQQueue">
<Arg>fieldNotifJmsQueue</Arg>
</New>
</Arg>
</New>
<New id="inkJmsQueue" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>fpp/inkJmsQueue</Arg>
<Arg>
<New class="org.apache.activemq.command.ActiveMQQueue">
<Arg>inkJmsQueue</Arg>
</New>
</Arg>
</New>
<!-- native library services -->
<New id="myscriptLicenseService" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/myscriptLicenseService</Arg>
<Arg>
<New
class="com.visionobjects.licensemanager.impl.MyscriptLicenseServiceImpl">
<Arg>localhost</Arg>
</New>
</Arg>
</New>
<!-- *********************** -->
<!-- form server properties -->
<!-- *********************** -->
<New id="fpp.form.properties" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/fpp.form.properties</Arg>
<Arg>
<New class="java.util.Properties">
<Put name="fpp.form.defaultEnvironmentName">default</Put>
<Put name="fpp.form.defaultEnvironmentType">STANDARD</Put>
<Put name="fpp.form.jbpm.job.nbexecutor">4</Put>
<Put name="fpp.form.jbpm.job.idleinterval">1000</Put>
<Put name="fpp.form.field.notif.nbconsumers">2</Put>
<Put name="fpp.form.ink.nbconsumers">2</Put>
<Put name="fpp.form.instance.instanceValidationMode">STANDARD</Put>
<Put name="fpp.form.formdb.dialect">org.hibernate.dialect.SQLServerDialect</Put>
<!--<Put name="fpp.form.formdb.hibernate.show_sql">true</Put>-->
<Put name="fpp.form.formdb.hibernate.show_sql">true</Put>
<Put name="fpp.form.formdb.hibernate.transaction.factory_class">org.hibernate.transaction.JTATransactionFactory</Put>
<Put name="fpp.form.formdb.hibernate.transaction.manager_lookup_class">org.hibernate.transaction.BTMTransactionManagerLookup
</Put>
<Put name="fpp.form.formdb.hibernate.cache.use_query_cache">false</Put>
<Put name="fpp.form.formdb.hibernate.cache.use_second_level_cache">false</Put>
<Put name="fpp.form.formdb.hibernate.cache.use_structured_cache">false</Put>
<Put name="fpp.form.formdb.hibernate.cache.provider_class">org.hibernate.cache.NoCacheProvider</Put>
<Put name="fpp.form.jbpmdb.dialect">org.hibernate.dialect.SQLServerDialect</Put>
<Put name="fpp.form.jbpmdb.hibernate.show_sql">true</Put>
<Put name="fpp.form.jbpmdb.hibernate.transaction.factory_class">org.hibernate.transaction.JTATransactionFactory</Put>
<Put name="fpp.form.jbpmdb.hibernate.transaction.manager_lookup_class">org.hibernate.transaction.BTMTransactionManagerLookup
</Put>
<Put name="fpp.form.jbpmdb.hibernate.cache.use_query_cache">false</Put>
<Put name="fpp.form.jbpmdb.hibernate.cache.use_second_level_cache">false</Put>
<Put name="fpp.form.jbpmdb.hibernate.cache.use_structured_cache">false</Put>
<Put name="fpp.form.jbpmdb.hibernate.cache.provider_class">org.hibernate.cache.NoCacheProvider</Put>
<Put name="fpp.form.scheduler.jobStore.driverDelegateClass">org.quartz.impl.jdbcjobstore.MSSQLDelegate</Put>
<Put name="fpp.form.scheduler.dataSource.driver">com.microsoft.sqlserver.jdbc.SQLServerDriver</Put>
<Put name="fpp.form.scheduler.dataSource.URL">jdbc:sqlserver://DYHVDB01\ALPHA;DatabaseName=tdb_digipen_fpp;integratedSecurity=false
</Put>
<Put name="fpp.form.scheduler.dataSource.user">manage_digipen</Put>
<Put name="fpp.form.scheduler.dataSource.password">5T1fte?</Put>
<!-- Cron Format A cron expression is a string comprised of 6 or 7 fields
separated by white space. Fields can contain any of the allowed values, along
with various combinations of the allowed special characters for that field.
The fields are as follows: Field Name Mandatory Allowed Values Allowed Special
Characters Seconds YES 0-59 , - * / Minutes YES 0-59 , - * / Hours YES 0-23
, - * / Day of month YES 1-31 , - * ? / L W Month YES 1-12 or JAN-DEC , -
* / Day of week YES 1-7 or SUN-SAT , - * ? / L # Year NO empty, 1970-2099
, - * / -->
<Put name="fpp.form.purge.moduleinfo.cron">0 0/1 * * * ?</Put>
<Put name="fpp.form.purge.instances.cron">0 0 * * * ?</Put>
<Put name="fpp.form.purge.instances.defaultcase">365</Put>
<Put name="fpp.form.purge.instances.case1">10</Put>
<Put name="fpp.form.purge.instances.case2">60</Put>
<Put name="fpp.form.purge.instances.case3">100</Put>
<Put name="fpp.form.purge.instances.case4">30</Put>
<Put name="fpp.form.purge.instances.case5">60</Put>
<Put name="fpp.form.export.cron">0 0 * * * ?</Put>
<Put name="fpp.form.export.exportpath">C:\FPP</Put>
<Put name="fpp.form.export.exportMode">REGULAR</Put>
<Put name="fpp.form.export.buildingType">INCREMENTAL</Put>
<Put name="fpp.form.export.addInformations">true</Put>
</New>
</Arg>
</New>
<New id="fppFormDbDataSource" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>jdbc/fppFormDbDataSource</Arg>
<Arg>
<Ref id="fppDataSource"></Ref>
</Arg>
</New>
<New id="fppJbpmDbDataSource" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>jdbc/fppJbpmDbDataSource</Arg>
<Arg>
<Ref id="fppDataSource" />
</Arg>
</New>
<New id="formJmsTopicConnectionFactory" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/formJmsTopicConnectionFactory</Arg>
<Arg>
<Ref id="fppServerConnectionFactory" />
</Arg>
</New>
<New id="fieldProducerJmsConnectionFactory" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/fieldProducerJmsConnectionFactory</Arg>
<Arg>
<Ref id="fppServerConnectionFactory" />
</Arg>
</New>
<New id="fieldNotifConsumerJmsConnectionFactory" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/fieldNotifConsumerJmsConnectionFactory</Arg>
<Arg>
<Ref id="fppServerConnectionFactory" />
</Arg>
</New>
<New id="inkConsumerJmsConnectionFactory" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/inkConsumerJmsConnectionFactory</Arg>
<Arg>
<Ref id="fppServerConnectionFactory" />
</Arg>
</New>
<!-- HWR SERVER -->
<New id="fpp.hwr-server.properties" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/fpp.hwr-server.properties</Arg>
<Arg>
<New class="java.util.Properties">
<Put name="fpp.hwr-server.formbroker.uri">failover:nio://localhost:61615</Put>
<Put name="fpp.hwr-server.fieldConsumers">4</Put>
<Put name="fpp.hwr-server.resourceManager.memoryUsageThreshold">262144000</Put>
<Put name="fpp.hwr-server.resourceManager.resourceCountThreshold">150</Put>
<Put name="fpp.hwr-server.resourceManager.idleTimeLimit">1800000</Put>
<Put name="fpp.hwr-server.resourceManager.timeToLive">3600000</Put>
<Put name="fpp.hwr-server.resourceManager.wakeUpInterval">100000</Put>
<Put name="fpp.hwr-server.formdb.dialect">org.hibernate.dialect.SQLServerDialect</Put>
<Put name="fpp.hwr-server.formdb.hibernate.show_sql">true</Put>
<Put name="fpp.hwr-server.formdb.hibernate.transaction.factory_class">org.hibernate.transaction.JTATransactionFactory</Put>
<Put
name="fpp.hwr-server.formdb.hibernate.transaction.manager_lookup_class">org.hibernate.transaction.BTMTransactionManagerLookup</Put>
<Put name="fpp.hwr-server.internal.dumpRecognition">false</Put>
</New>
</Arg>
</New>
<New id="myscriptHwrService" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/myscriptHwrService</Arg>
<Arg>
<New class="com.visionobjects.myscript.commons.hwr.engine.HwrEngineService">
<Set name="handwritingContextUserLimit">50</Set>
<Set name="resourceUserLimit">0</Set>
<Set name="otherObjectUserLimit">500</Set>
<Call name="doStart" />
</New>
</Arg>
</New>
<New id="fieldNotificationProducerJmsConnectionFactory" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/fieldNotificationProducerJmsConnectionFactory</Arg>
<Arg>
<Ref id="fppServerConnectionFactory" />
</Arg>
</New>
<New id="fieldConsumerJmsConnectionFactory" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/fieldConsumerJmsConnectionFactory</Arg>
<Arg>
<Ref id="fppServerConnectionFactory" />
</Arg>
</New>
<!-- wrapper -->
<New id="fppWrapperServerConnectionFactory" class="org.apache.activemq.ActiveMQConnectionFactory">
<Set name="brokerURL">nio://localhost:61615</Set>
<Set name="redeliveryPolicy">
<New class="org.apache.activemq.RedeliveryPolicy">
<Set name="maximumRedeliveries">-1</Set>
<Set name="backOffMultiplier">2</Set>
</New>
</Set>
</New>
<New id="formNotificationConsumerFactory" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/formNotificationConsumerFactory</Arg>
<Arg>
<Ref id="fppWrapperServerConnectionFactory" />
</Arg>
</New>
<New id="inkProducerJmsConnectionFactory" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/inkProducerJmsConnectionFactory</Arg>
<Arg>
<Ref id="fppWrapperServerConnectionFactory" />
</Arg>
</New>
<!-- JMX/SENSORS -->
<New id="inkJmsQueueUrl" class="java.lang.String">
<Arg>service:jmx:rmi://localhost:2100/jndi/rmi://localhost:2099/jmxrmi
</Arg>
</New>
<New id="inkJmsQueueObjectName" class="java.lang.String">
<Arg>org.apache.activemq:BrokerName=formserver.broker,Type=Queue,Destination=inkJmsQueue
</Arg>
</New>
<New id="fieldNotifJmsQueueUrl" class="java.lang.String">
<Arg>service:jmx:rmi://localhost:2100/jndi/rmi://localhost:2099/jmxrmi
</Arg>
</New>
<New id="fieldNotifJmsQueueObjectName" class="java.lang.String">
<Arg>org.apache.activemq:BrokerName=formserver.broker,Type=Queue,Destination=fieldNotifJmsQueue
</Arg>
</New>
<New id="fieldJmsQueueUrl" class="java.lang.String">
<Arg>service:jmx:rmi://localhost:2100/jndi/rmi://localhost:2099/jmxrmi
</Arg>
</New>
<New id="fieldJmsQueueObjectName" class="java.lang.String">
<Arg>org.apache.activemq:BrokerName=formserver.broker,Type=Queue,Destination=fieldJmsQueue
</Arg>
</New>
<New id="formNotifiationTopicUrl" class="java.lang.String">
<Arg>service:jmx:rmi://localhost:2100/jndi/rmi://localhost:2099/jmxrmi
</Arg>
</New>
<New id="formNotifiationTopicObjectName" class="java.lang.String">
<Arg>org.apache.activemq:BrokerName=formserver.broker,Type=Queue,Destination=formNotifiationTopic
</Arg>
</New>
<New id="server.list" class="java.util.HashMap">
<!-- InkJmsQueue -->
<Put name="WRP">
<New class="java.util.ArrayList">
<Call name="add">
<Arg>
<New class="java.lang.String">
<Arg>http://localhost:8081</Arg>
</New>
</Arg>
</Call>
<Call name="add">
<Arg>
<New class="java.lang.String">
<Arg>http://localhost:8084</Arg>
</New>
</Arg>
</Call>
</New>
</Put>
<Put name="FORM">
<New class="java.util.ArrayList">
<Call name="add">
<Arg>
<New class="java.lang.String">
<Arg>http://localhost:8080</Arg>
</New>
</Arg>
</Call>
<Call name="add">
<Arg>
<New class="java.lang.String">
<Arg>http://localhost:8084</Arg>
</New>
</Arg>
</Call>
</New>
</Put>
<Put name="HWR">
<New class="java.util.ArrayList">
<Call name="add">
<Arg>
<New class="java.lang.String">
<Arg>http://localhost:8083</Arg>
</New>
</Arg>
</Call>
<Call name="add">
<Arg>
<New class="java.lang.String">
<Arg>http://localhost:8084</Arg>
</New>
</Arg>
</Call>
</New>
</Put>
</New>
<New id="fpp.form.jmx.properties" class="java.util.HashMap">
<!-- InkJmsQueue -->
<Put name="inkJmsQueueSize">
<New class="java.util.HashMap">
<Put name="urlQueue">
<Ref id="inkJmsQueueUrl" />
</Put>
<Put name="objectName">
<Ref id="inkJmsQueueObjectName" />
</Put>
<Put name="attribute">QueueSize</Put>
</New>
</Put>
<Put name="inkJmsConsumerCount">
<New class="java.util.HashMap">
<Put name="urlQueue">
<Ref id="inkJmsQueueUrl" />
</Put>
<Put name="objectName">
<Ref id="inkJmsQueueObjectName" />
</Put>
<Put name="attribute">ConsumerCount</Put>
</New>
</Put>
<Put name="inkJmsDequeueCount">
<New class="java.util.HashMap">
<Put name="urlQueue">
<Ref id="inkJmsQueueUrl" />
</Put>
<Put name="objectName">
<Ref id="inkJmsQueueObjectName" />
</Put>
<Put name="attribute">DequeueCount</Put>
</New>
</Put>
<Put name="inkJmsAverageEnqueueTime">
<New class="java.util.HashMap">
<Put name="urlQueue">
<Ref id="inkJmsQueueUrl" />
</Put>
<Put name="objectName">
<Ref id="inkJmsQueueObjectName" />
</Put>
<Put name="attribute">AverageEnqueueTime</Put>
</New>
</Put>
<Put name="inkJmsMaxEnqueueTime">
<New class="java.util.HashMap">
<Put name="urlQueue">
<Ref id="inkJmsQueueUrl" />
</Put>
<Put name="objectName">
<Ref id="inkJmsQueueObjectName" />
</Put>
<Put name="attribute">MaxEnqueueTime</Put>
</New>
</Put>
<!--FieldNotifJmsQueue -->
<Put name="fieldNotifJmsQueueSize">
<New class="java.util.HashMap">
<Put name="urlQueue">
<Ref id="fieldNotifJmsQueueUrl" />
</Put>
<Put name="objectName">
<Ref id="fieldNotifJmsQueueObjectName" />
</Put>
<Put name="attribute">QueueSize</Put>
</New>
</Put>
<Put name="fieldNotifJmsConsumerCount">
<New class="java.util.HashMap">
<Put name="urlQueue">
<Ref id="fieldNotifJmsQueueUrl" />
</Put>
<Put name="objectName">
<Ref id="fieldNotifJmsQueueObjectName" />
</Put>
<Put name="attribute">ConsumerCount</Put>
</New>
</Put>
<Put name="fieldNotifJmsDequeueCount">
<New class="java.util.HashMap">
<Put name="urlQueue">
<Ref id="fieldNotifJmsQueueUrl" />
</Put>
<Put name="objectName">
<Ref id="fieldNotifJmsQueueObjectName" />
</Put>
<Put name="attribute">DequeueCount</Put>
</New>
</Put>
<Put name="fieldNotifJmsAverageEnqueueTime">
<New class="java.util.HashMap">
<Put name="urlQueue">
<Ref id="fieldNotifJmsQueueUrl" />
</Put>
<Put name="objectName">
<Ref id="fieldNotifJmsQueueObjectName" />
</Put>
<Put name="attribute">AverageEnqueueTime</Put>
</New>
</Put>
<Put name="fieldNotifJmsMaxEnqueueTime">
<New class="java.util.HashMap">
<Put name="urlQueue">
<Ref id="fieldNotifJmsQueueUrl" />
</Put>
<Put name="objectName">
<Ref id="fieldNotifJmsQueueObjectName" />
</Put>
<Put name="attribute">MaxEnqueueTime</Put>
</New>
</Put>
</New>
<New id="fpp.form.ui.parameters" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/fpp.form.ui.parameters</Arg>
<Arg>
<New
class="com.visionobjects.myscript.fpp.ui.parameters.impl.UIParametersServiceImpl">
<Set name="jmxProperties">
<Ref id="fpp.form.jmx.properties"></Ref>
</Set>
<Set name="serverList">
<Ref id="server.list"></Ref>
</Set>
</New>
</Arg>
</New>
</Configure>
Thanks so much in advance.
Hello guys,
I have been setting a production system with bitronix transaction manager, SQL server 2008, XA transactions and jetty 6. In the beginning this software was configured to run with MySQL. But one of my customer decided to move everything to MSSQL server 2008.
In that moment I was trying to get this up and running for some weeks (The configuration was completely different) and finally I got it.
The configuration with MSSQL server was running perfectly during 1 month but then from one day to other the error message I will show now appeared and I do not how to solve it. I almost read all the hints from google about this exception but nothing helped
me out.
I hope you guys can help me to find a way to solve it.
- I tried different version of the jdbc driver 3.0 and 4.0.
- I tried to export exactly the database to my localserver and it's running perfectly with the same configuration.
The problem is that I cannot reproduce the error in other place that is not the customer and at the same time I have no access to their internal database server. They installed all the XA transaction stuff (dll in binn, enable XA, and grant the permissions
for SQLXAUser), I am quite sure because it was running for one month without any problem.
I asked to the customer if anything happenend on their server (microsoft updates, machines reboot, ...) but nothing of these happened.
Also I tried this link out but did not help me.
<a href="http://social.msdn.microsoft.com/Forums/sqlserver/en-US/15c1e6f5-ec1e-4376-8f45-25e61ffc1306/the-function-start-has-failed-no-transaction-cookie-was-returned?forum=sqldataaccess">http://social.msdn.microsoft.com/Forums/sqlserver/en-US/15c1e6f5-ec1e-4376-8f45-25e61ffc1306/the-function-start-has-failed-no-transaction-cookie-was-returned?forum=sqldataaccess</a>
The exception is the following:
[2014-05-15 14:06:08,842] INFO 3666[main] - org.mortbay.log.Slf4jLog.info(Slf4jLog.java:67) - Starting Bitronix Transaction Manager
[2014-05-15 14:06:08,951] INFO 3775[main] - org.mortbay.log.Slf4jLog.info(Slf4jLog.java:67) - Extract ./webapps/myscript-fpp-wrapper-server.war to D:\Temp\Jetty_0_0_0_0_8080_myscript.fpp.wrapper.server.war__myscript.form.wrapper.server__.bnwnn7\webapp
[2014-05-15 14:06:10,324] INFO 5148[main] - org.mortbay.log.Slf4jLog.info(Slf4jLog.java:67) - NO JSP Support for /myscript-form-wrapper-server, did not find org.apache.jasper.servlet.JspServlet
[2014-05-15 14:06:12,742] WARN 7566[main] - org.dozer.config.GlobalSettings.loadGlobalSettings(GlobalSettings.java:118) - Dozer configuration file not found: dozer.properties. Using defaults for all Dozer global properties.
[2014-05-15 14:06:13,288] WARN 8112[main] - org.hibernate.util.JDBCExceptionReporter.logExceptions(JDBCExceptionReporter.java:100) - SQL Error: 0, SQLState: null
[2014-05-15 14:06:13,288]ERROR 8112[main] - org.hibernate.util.JDBCExceptionReporter.logExceptions(JDBCExceptionReporter.java:101) - error enlisting a JdbcConnectionHandle of a JdbcPooledConnection from datasource fppDataSource in state ACCESSIBLE with
usage count 1 wrapping SQLServerXAConnection:1 on ProxyConnectionID:1
[2014-05-15 14:06:13,319]ERROR 8143[main] - org.springframework.web.context.ContextLoader.initWebApplicationContext(ContextLoader.java:220) - Context initialization failed
org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'moduleRegistration' defined in class path resource [com/visionobjects/myscript/fpp/wrapper/module-registration.xml]: Invocation of init method failed; nested exception is
org.hibernate.exception.GenericJDBCException: could not execute query
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1420)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:519)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:456)
at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:291)
at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222)
at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:288)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:190)
at org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(DefaultListableBeanFactory.java:580)
at org.springframework.context.support.AbstractApplicationContext.finishBeanFactoryInitialization(AbstractApplicationContext.java:895)
at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:425)
at org.springframework.web.context.ContextLoader.createWebApplicationContext(ContextLoader.java:276)
at org.springframework.web.context.ContextLoader.initWebApplicationContext(ContextLoader.java:197)
at org.springframework.web.context.ContextLoaderListener.contextInitialized(ContextLoaderListener.java:47)
at org.mortbay.jetty.handler.ContextHandler.startContext(ContextHandler.java:549)
at org.mortbay.jetty.servlet.Context.startContext(Context.java:136)
at org.mortbay.jetty.webapp.WebAppContext.startContext(WebAppContext.java:1282)
at org.mortbay.jetty.handler.ContextHandler.doStart(ContextHandler.java:518)
at org.mortbay.jetty.webapp.WebAppContext.doStart(WebAppContext.java:499)
at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:50)
at org.mortbay.jetty.handler.HandlerCollection.doStart(HandlerCollection.java:152)
at org.mortbay.jetty.handler.ContextHandlerCollection.doStart(ContextHandlerCollection.java:156)
at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:50)
at org.mortbay.jetty.handler.HandlerWrapper.doStart(HandlerWrapper.java:130)
at org.mortbay.jetty.Server.doStart(Server.java:224)
at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:50)
at org.mortbay.xml.XmlConfiguration.main(XmlConfiguration.java:985)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.mortbay.start.Main.invokeMain(Main.java:194)
at org.mortbay.start.Main.start(Main.java:534)
at org.mortbay.start.Main.start(Main.java:441)
at org.mortbay.start.Main.main(Main.java:119)
Caused by: org.hibernate.exception.GenericJDBCException: could not execute query
at org.hibernate.exception.SQLStateConverter.handledNonSpecificException(SQLStateConverter.java:126)
at org.hibernate.exception.SQLStateConverter.convert(SQLStateConverter.java:114)
at org.hibernate.exception.JDBCExceptionHelper.convert(JDBCExceptionHelper.java:66)
at org.hibernate.loader.Loader.doList(Loader.java:2235)
at org.hibernate.loader.Loader.listIgnoreQueryCache(Loader.java:2129)
at org.hibernate.loader.Loader.list(Loader.java:2124)
at org.hibernate.loader.criteria.CriteriaLoader.list(CriteriaLoader.java:118)
at org.hibernate.impl.SessionImpl.list(SessionImpl.java:1597)
at org.hibernate.impl.CriteriaImpl.list(CriteriaImpl.java:306)
at org.hibernate.impl.CriteriaImpl.uniqueResult(CriteriaImpl.java:328)
at com.visionobjects.myscript.fpp.form.dao.impl.ModuleInfoDaoImpl.getModuleInfo(ModuleInfoDaoImpl.java:57)
at com.visionobjects.myscript.fpp.ModuleRegistration$1.doInTransactionWithoutResult(ModuleRegistration.java:73)
at org.springframework.transaction.support.TransactionCallbackWithoutResult.doInTransaction(TransactionCallbackWithoutResult.java:33)
at org.springframework.transaction.support.TransactionTemplate.execute(TransactionTemplate.java:130)
at com.visionobjects.myscript.fpp.ModuleRegistration.init(ModuleRegistration.java:66)
at com.visionobjects.myscript.fpp.ModuleRegistration.start(ModuleRegistration.java:60)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.invokeCustomInitMethod(AbstractAutowireCapableBeanFactory.java:1544)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.invokeInitMethods(AbstractAutowireCapableBeanFactory.java:1485)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1417)
... 33 more
Caused by: java.sql.SQLException: error enlisting a JdbcConnectionHandle of a JdbcPooledConnection from datasource fppDataSource in state ACCESSIBLE with usage count 1 wrapping SQLServerXAConnection:1 on ProxyConnectionID:1
at bitronix.tm.resource.jdbc.JdbcConnectionHandle.enlistResource(JdbcConnectionHandle.java:86)
at bitronix.tm.resource.jdbc.JdbcConnectionHandle.prepareStatement(JdbcConnectionHandle.java:243)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at bitronix.tm.resource.jdbc.BaseProxyHandlerClass.invoke(BaseProxyHandlerClass.java:63)
at $Proxy29.prepareStatement(Unknown Source)
at org.hibernate.jdbc.AbstractBatcher.getPreparedStatement(AbstractBatcher.java:534)
at org.hibernate.jdbc.AbstractBatcher.getPreparedStatement(AbstractBatcher.java:452)
at org.hibernate.jdbc.AbstractBatcher.prepareQueryStatement(AbstractBatcher.java:161)
at org.hibernate.loader.Loader.prepareQueryStatement(Loader.java:1577)
at org.hibernate.loader.Loader.doQuery(Loader.java:696)
at org.hibernate.loader.Loader.doQueryAndInitializeNonLazyCollections(Loader.java:259)
at org.hibernate.loader.Loader.doList(Loader.java:2232)
... 52 more
Caused by: bitronix.tm.internal.BitronixSystemException: cannot enlist an XAResourceHolderState with uniqueName=fppDataSource XAResource= XAResourceID:1 with XID a Bitronix XID [6A657474792D6670702D73657276657200000145FFC68B9B00000000 : 6A657474792D6670702D73657276657200000145FFC68BCA00000002],
error=XAER_RMERR
at bitronix.tm.BitronixTransaction.enlistResource(BitronixTransaction.java:100)
at bitronix.tm.resource.common.TransactionContextHelper.enlistInCurrentTransaction(TransactionContextHelper.java:70)
at bitronix.tm.resource.jdbc.JdbcConnectionHandle.enlistResource(JdbcConnectionHandle.java:84)
... 66 more
<b>Caused by: javax.transaction.xa.XAException: com.microsoft.sqlserver.jdbc.SQLServerException: The function START: has failed. No transaction cookie was returned </b>
at com.microsoft.sqlserver.jdbc.SQLServerXAResource.DTC_XA_Interface(SQLServerXAResource.java:642)
at com.microsoft.sqlserver.jdbc.SQLServerXAResource.start(SQLServerXAResource.java:674)
at bitronix.tm.internal.XAResourceHolderState.start(XAResourceHolderState.java:211)
at bitronix.tm.internal.XAResourceManager.enlist(XAResourceManager.java:108)
at bitronix.tm.BitronixTransaction.enlistResource(BitronixTransaction.java:93)
... 68 more
I think the "bold" exception is the key.
Also the configuration file of my jetty server.
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE Configure PUBLIC "-//Mort Bay Consulting//DTD Configure//EN" "http://jetty.mortbay.org/configure.dtd">
<!-- developpment jetty configuration -->
<!-- launch with main class : org.mortbay.start.Main app arguments:
deploy-conf/jetty-conf/mysql/jetty-dev.xml vm arguments : -Xmx1024M -DSTOP.KEY=stop
-DSTOP.PORT=6669 to stop : - - stop -Xmx1024M -DSTOP.KEY=stop -DSTOP.PORT=6669 -->
<Configure id="Server" class="org.mortbay.jetty.Server">
<Array id="plusConfig" type="java.lang.String">
<Item>org.mortbay.jetty.webapp.WebInfConfiguration</Item>
<Item>org.mortbay.jetty.plus.webapp.EnvConfiguration</Item>
<Item>org.mortbay.jetty.plus.webapp.Configuration</Item>
<Item>org.mortbay.jetty.webapp.JettyWebXmlConfiguration</Item>
<Item>org.mortbay.jetty.webapp.TagLibConfiguration</Item>
</Array>
<Array id="serverClasses" type="java.lang.String">
</Array>
<Array id="systemClasses" type="java.lang.String">
</Array>
<!-- web apps -->
<Set name="handler">
<New id="handlerContext" class="org.mortbay.jetty.handler.ContextHandlerCollection">
<Set name="handlers">
<Array id="handlerArray" type="org.mortbay.jetty.webapp.WebAppContext">
<!-- wrapper server -->
<Item>
<New class="org.mortbay.jetty.webapp.WebAppContext">
<Arg>./webapps/myscript-fpp-wrapper-server.war</Arg>
<Arg>/myscript-form-wrapper-server</Arg>
<Set name="serverClasses">
<Ref id="serverClasses" />
</Set>
<Set name="ConfigurationClasses">
<Ref id="plusConfig" />
</Set>
</New>
</Item>
<!-- form server -->
<Item>
<New class="org.mortbay.jetty.webapp.WebAppContext">
<Arg>./webapps/myscript-fpp-form-server.war
</Arg>
<Arg>/myscript-form-server</Arg>
<Set name="serverClasses">
<Ref id="serverClasses" />
</Set>
<Set name="ConfigurationClasses">
<Ref id="plusConfig" />
</Set>
</New>
</Item>
<!-- hwr server -->
<Item>
<New class="org.mortbay.jetty.webapp.WebAppContext">
<Arg>./webapps/myscript-fpp-hwr-server.war</Arg>
<Arg>/myscript-form-hwr-server</Arg>
<Set name="serverClasses">
<Ref id="serverClasses" />
</Set>
<Set name="ConfigurationClasses">
<Ref id="plusConfig" />
</Set>
</New>
</Item>
</Array>
</Set>
</New>
</Set>
<Call name="addConnector">
<Arg>
<New class="org.mortbay.jetty.nio.SelectChannelConnector">
<Set name="port">8080</Set>
</New>
</Arg>
</Call>
<!-- Use the jdk 1.5 platformMBeanServer -->
<Call id="MBeanServer" class="java.lang.management.ManagementFactory"
name="getPlatformMBeanServer" />
<Get id="Container" name="container">
<Call name="addEventListener">
<Arg>
<New class="org.mortbay.management.MBeanContainer">
<Arg>
<Ref id="MBeanServer" />
</Arg>
<Call name="start" />
</New>
</Arg>
</Call>
</Get>
<!-- Setup the RMIRegistry on a specific port -->
<Call id="rmiRegistry" class="java.rmi.registry.LocateRegistry"
name="createRegistry">
<Arg type="int">2099</Arg>
</Call>
<!-- Setup the JMXConnectorServer on a specific rmi server port -->
<Call id="jmxConnectorServer" class="javax.management.remote.JMXConnectorServerFactory"
name="newJMXConnectorServer">
<Arg>
<New class="javax.management.remote.JMXServiceURL">
<Arg>service:jmx:rmi://localhost:2100/jndi/rmi://localhost:2099/jmxrmi
</Arg>
</New>
</Arg>
<Arg />
<Arg>
<Ref id="MBeanServer" />
</Arg>
<Call name="start" />
</Call>
<!--************************* -->
<!-- embbeded ActiveMQ Broker -->
<!--************************* -->
<New id="brokerService" class="org.apache.activemq.broker.BrokerService">
<Set name="brokerName">fppBrokerActiveMQ</Set>
<Set name="dataDirectoryFile"></Set>
<Call name="getSystemUsage">
<Call name="getMemoryUsage">
<Set name="limit">26428800</Set>
</Call>
<Call name="getStoreUsage">
<Set name="limit">204857600</Set>
</Call>
</Call>
<Call name="addConnector">
<Arg>nio://localhost:61615</Arg>
</Call>
<Call name="start"></Call>
</New>
<!-- ************************** -->
<!-- common fpp jndi resources -->
<!-- ************************** -->
<!-- ui debug properties -->
<New id="fpp.common-ui.velocityProperties" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/fpp.common-ui.velocityProperties</Arg>
<Arg>
<New class="java.util.Properties">
<Put name="spring.resource.loader.class">org.springframework.ui.velocity.SpringResourceLoader
</Put>
<Put name="spring.resource.loader.cache">false</Put>
<Put name="velocimacro.library.autoreload">true</Put>
</New>
</Arg>
</New>
<New id="fpp.wrapper-server.properties" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/fpp.wrapper-server.properties</Arg>
<Arg>
<New class="java.util.Properties">
<Put name="fpp.wrapper-server.instanceServiceWsdlLocation">http://localhost:8080/myscript-form-server/cxf/instance?wsdl
</Put>
<Put name="fpp.wrapper-server.formServiceWsdlLocation">http://localhost:8080/myscript-form-server/cxf/form?wsdl
</Put>
<Put name="fpp.wrapper-server.formDeprecatedServiceWsdlLocation">http://localhost:8080/myscript-form-server/cxf/formDeprecated?wsdl
</Put>
<Put name="fpp.wrapper-server.hwrResourceServiceWsdlLocation">http://localhost:8080/myscript-form-server/cxf/hwrResource?wsdl
</Put>
<Put name="fpp.wrapper-server.defaultEnvironmentName">default</Put>
<Put name="fpp.wrapper-server.defaultEnvironmentType">STANDARD</Put>
<Put name="fpp.wrapper-server.formdb.dialect">org.hibernate.dialect.SQLServerDialect</Put>
<Put name="fpp.wrapper-server.formdb.hibernate.show_sql">true</Put>
<Put name="fpp.wrapper-server.formdb.hibernate.transaction.factory_class">org.hibernate.transaction.JTATransactionFactory</Put>
<Put name="fpp.wrapper-server.formdb.hibernate.transaction.manager_lookup_class">org.hibernate.transaction.BTMTransactionManagerLookup</Put>
<Put name="fpp.wrapper-server.formdb.hibernate.cache.use_query_cache">false</Put>
<Put name="fpp.wrapper-server.formdb.hibernate.cache.use_second_level_cache">false</Put>
<Put name="fpp.wrapper-server.formdb.hibernate.cache.use_structured_cache">false</Put>
<Put name="fpp.wrapper-server.formdb.hibernate.cache.provider_class">org.hibernate.cache.NoCacheProvider</Put>
</New>
</Arg>
</New>
<!-- transaction manager - bitronix -->
<Call name="getConfiguration" class="bitronix.tm.TransactionManagerServices">
<Set name="serverId">jetty-fpp-server</Set>
<Set name="gracefulShutdownInterval">45</Set>
<Set name="logPart1Filename">btm/btm1.tlog</Set>
<Set name="logPart2Filename">btm/btm2.tlog</Set>
</Call>
<Set name="gracefulShutdown">60000</Set>
<Call name="addLifeCycle">
<Arg>
<New class="bitronix.tm.integration.jetty6.BTMLifeCycle" />
</Arg>
</Call>
<New class="org.mortbay.jetty.plus.naming.Transaction">
<Arg>
<Call name="getTransactionManager" class="bitronix.tm.TransactionManagerServices" />
</Arg>
</New>
<New class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>java:/TransactionManager</Arg>
<Arg>
<Call name="getTransactionManager" class="bitronix.tm.TransactionManagerServices" />
</Arg>
</New>
<New id="userTransactionManager" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>java:comp/TransactionManager</Arg>
<Arg>
<Call name="getTransactionManager" class="bitronix.tm.TransactionManagerServices" />
</Arg>
</New>
<New id="userTransactionManager" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>java:comp/UserTransaction</Arg>
<Arg>
<Call name="getTransactionManager" class="bitronix.tm.TransactionManagerServices" />
</Arg>
</New>
<!-- database data source -->
<New id="fppDataSource" class="bitronix.tm.resource.jdbc.PoolingDataSource">
<Set name="uniqueName">fppDataSource</Set>
<Set name="className">com.microsoft.sqlserver.jdbc.SQLServerXADataSource</Set>
<Set name="minPoolSize">0</Set>
<Set name="maxPoolSize">50</Set>
<Get name="driverProperties">
<Put name="serverName">DYHVDB01</Put>
<Put name="instanceName">ALPHA</Put>
<Put name="integratedSecurity">false</Put>
<Put name="databaseName">tdb_digipen_fpp</Put>
<Put name="user">manage_digipen</Put>
<Put name="password">5T1fte?</Put>
<!--Needed to test??<Put name="pinGlobalTxToPhysicalConnection">true</Put>-->
</Get>
<Call name="init" />
</New>
<!-- Jms connection factories -->
<New id="fppServerConnectionFactory" class="bitronix.tm.resource.jms.PoolingConnectionFactory">
<Set name="className">org.apache.activemq.ActiveMQXAConnectionFactory</Set>
<Set name="uniqueName">fppServerConnectionFactory</Set>
<Set name="minPoolSize">4</Set>
<Set name="maxPoolSize">40</Set>
<Set name="allowLocalTransactions">true</Set>
<Get name="driverProperties">
<Put name="brokerURL">nio://localhost:61615?jms.prefetchPolicy.all=50</Put>
<New class="org.apache.activemq.RedeliveryPolicy">
<Set name="maximumRedeliveries">-1</Set>
<Set name="backOffMultiplier">2</Set>
</New>
</Get>
<Call name="init" />
</New>
<!-- JMS Queues & topics -->
<New id="formNotifiationTopic" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>fpp/formNotifiationTopic</Arg>
<Arg>
<New class="org.apache.activemq.command.ActiveMQTopic">
<Arg>formNotifiationTopic</Arg>
</New>
</Arg>
</New>
<New id="fieldJmsQueue" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>fpp/fieldJmsQueue</Arg>
<Arg>
<New class="org.apache.activemq.command.ActiveMQQueue">
<Arg>fieldJmsQueue</Arg>
</New>
</Arg>
</New>
<New id="fieldNotifJmsQueue" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>fpp/fieldNotifJmsQueue</Arg>
<Arg>
<New class="org.apache.activemq.command.ActiveMQQueue">
<Arg>fieldNotifJmsQueue</Arg>
</New>
</Arg>
</New>
<New id="inkJmsQueue" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>fpp/inkJmsQueue</Arg>
<Arg>
<New class="org.apache.activemq.command.ActiveMQQueue">
<Arg>inkJmsQueue</Arg>
</New>
</Arg>
</New>
<!-- native library services -->
<New id="myscriptLicenseService" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/myscriptLicenseService</Arg>
<Arg>
<New
class="com.visionobjects.licensemanager.impl.MyscriptLicenseServiceImpl">
<Arg>localhost</Arg>
</New>
</Arg>
</New>
<!-- *********************** -->
<!-- form server properties -->
<!-- *********************** -->
<New id="fpp.form.properties" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/fpp.form.properties</Arg>
<Arg>
<New class="java.util.Properties">
<Put name="fpp.form.defaultEnvironmentName">default</Put>
<Put name="fpp.form.defaultEnvironmentType">STANDARD</Put>
<Put name="fpp.form.jbpm.job.nbexecutor">4</Put>
<Put name="fpp.form.jbpm.job.idleinterval">1000</Put>
<Put name="fpp.form.field.notif.nbconsumers">2</Put>
<Put name="fpp.form.ink.nbconsumers">2</Put>
<Put name="fpp.form.instance.instanceValidationMode">STANDARD</Put>
<Put name="fpp.form.formdb.dialect">org.hibernate.dialect.SQLServerDialect</Put>
<!--<Put name="fpp.form.formdb.hibernate.show_sql">true</Put>-->
<Put name="fpp.form.formdb.hibernate.show_sql">true</Put>
<Put name="fpp.form.formdb.hibernate.transaction.factory_class">org.hibernate.transaction.JTATransactionFactory</Put>
<Put name="fpp.form.formdb.hibernate.transaction.manager_lookup_class">org.hibernate.transaction.BTMTransactionManagerLookup
</Put>
<Put name="fpp.form.formdb.hibernate.cache.use_query_cache">false</Put>
<Put name="fpp.form.formdb.hibernate.cache.use_second_level_cache">false</Put>
<Put name="fpp.form.formdb.hibernate.cache.use_structured_cache">false</Put>
<Put name="fpp.form.formdb.hibernate.cache.provider_class">org.hibernate.cache.NoCacheProvider</Put>
<Put name="fpp.form.jbpmdb.dialect">org.hibernate.dialect.SQLServerDialect</Put>
<Put name="fpp.form.jbpmdb.hibernate.show_sql">true</Put>
<Put name="fpp.form.jbpmdb.hibernate.transaction.factory_class">org.hibernate.transaction.JTATransactionFactory</Put>
<Put name="fpp.form.jbpmdb.hibernate.transaction.manager_lookup_class">org.hibernate.transaction.BTMTransactionManagerLookup
</Put>
<Put name="fpp.form.jbpmdb.hibernate.cache.use_query_cache">false</Put>
<Put name="fpp.form.jbpmdb.hibernate.cache.use_second_level_cache">false</Put>
<Put name="fpp.form.jbpmdb.hibernate.cache.use_structured_cache">false</Put>
<Put name="fpp.form.jbpmdb.hibernate.cache.provider_class">org.hibernate.cache.NoCacheProvider</Put>
<Put name="fpp.form.scheduler.jobStore.driverDelegateClass">org.quartz.impl.jdbcjobstore.MSSQLDelegate</Put>
<Put name="fpp.form.scheduler.dataSource.driver">com.microsoft.sqlserver.jdbc.SQLServerDriver</Put>
<Put name="fpp.form.scheduler.dataSource.URL">jdbc:sqlserver://DYHVDB01\ALPHA;DatabaseName=tdb_digipen_fpp;integratedSecurity=false
</Put>
<Put name="fpp.form.scheduler.dataSource.user">manage_digipen</Put>
<Put name="fpp.form.scheduler.dataSource.password">5T1fte?</Put>
<!-- Cron Format A cron expression is a string comprised of 6 or 7 fields
separated by white space. Fields can contain any of the allowed values, along
with various combinations of the allowed special characters for that field.
The fields are as follows: Field Name Mandatory Allowed Values Allowed Special
Characters Seconds YES 0-59 , - * / Minutes YES 0-59 , - * / Hours YES 0-23
, - * / Day of month YES 1-31 , - * ? / L W Month YES 1-12 or JAN-DEC , -
* / Day of week YES 1-7 or SUN-SAT , - * ? / L # Year NO empty, 1970-2099
, - * / -->
<Put name="fpp.form.purge.moduleinfo.cron">0 0/1 * * * ?</Put>
<Put name="fpp.form.purge.instances.cron">0 0 * * * ?</Put>
<Put name="fpp.form.purge.instances.defaultcase">365</Put>
<Put name="fpp.form.purge.instances.case1">10</Put>
<Put name="fpp.form.purge.instances.case2">60</Put>
<Put name="fpp.form.purge.instances.case3">100</Put>
<Put name="fpp.form.purge.instances.case4">30</Put>
<Put name="fpp.form.purge.instances.case5">60</Put>
<Put name="fpp.form.export.cron">0 0 * * * ?</Put>
<Put name="fpp.form.export.exportpath">C:\FPP</Put>
<Put name="fpp.form.export.exportMode">REGULAR</Put>
<Put name="fpp.form.export.buildingType">INCREMENTAL</Put>
<Put name="fpp.form.export.addInformations">true</Put>
</New>
</Arg>
</New>
<New id="fppFormDbDataSource" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>jdbc/fppFormDbDataSource</Arg>
<Arg>
<Ref id="fppDataSource"></Ref>
</Arg>
</New>
<New id="fppJbpmDbDataSource" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>jdbc/fppJbpmDbDataSource</Arg>
<Arg>
<Ref id="fppDataSource" />
</Arg>
</New>
<New id="formJmsTopicConnectionFactory" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/formJmsTopicConnectionFactory</Arg>
<Arg>
<Ref id="fppServerConnectionFactory" />
</Arg>
</New>
<New id="fieldProducerJmsConnectionFactory" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/fieldProducerJmsConnectionFactory</Arg>
<Arg>
<Ref id="fppServerConnectionFactory" />
</Arg>
</New>
<New id="fieldNotifConsumerJmsConnectionFactory" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/fieldNotifConsumerJmsConnectionFactory</Arg>
<Arg>
<Ref id="fppServerConnectionFactory" />
</Arg>
</New>
<New id="inkConsumerJmsConnectionFactory" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/inkConsumerJmsConnectionFactory</Arg>
<Arg>
<Ref id="fppServerConnectionFactory" />
</Arg>
</New>
<!-- HWR SERVER -->
<New id="fpp.hwr-server.properties" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/fpp.hwr-server.properties</Arg>
<Arg>
<New class="java.util.Properties">
<Put name="fpp.hwr-server.formbroker.uri">failover:nio://localhost:61615</Put>
<Put name="fpp.hwr-server.fieldConsumers">4</Put>
<Put name="fpp.hwr-server.resourceManager.memoryUsageThreshold">262144000</Put>
<Put name="fpp.hwr-server.resourceManager.resourceCountThreshold">150</Put>
<Put name="fpp.hwr-server.resourceManager.idleTimeLimit">1800000</Put>
<Put name="fpp.hwr-server.resourceManager.timeToLive">3600000</Put>
<Put name="fpp.hwr-server.resourceManager.wakeUpInterval">100000</Put>
<Put name="fpp.hwr-server.formdb.dialect">org.hibernate.dialect.SQLServerDialect</Put>
<Put name="fpp.hwr-server.formdb.hibernate.show_sql">true</Put>
<Put name="fpp.hwr-server.formdb.hibernate.transaction.factory_class">org.hibernate.transaction.JTATransactionFactory</Put>
<Put
name="fpp.hwr-server.formdb.hibernate.transaction.manager_lookup_class">org.hibernate.transaction.BTMTransactionManagerLookup</Put>
<Put name="fpp.hwr-server.internal.dumpRecognition">false</Put>
</New>
</Arg>
</New>
<New id="myscriptHwrService" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/myscriptHwrService</Arg>
<Arg>
<New class="com.visionobjects.myscript.commons.hwr.engine.HwrEngineService">
<Set name="handwritingContextUserLimit">50</Set>
<Set name="resourceUserLimit">0</Set>
<Set name="otherObjectUserLimit">500</Set>
<Call name="doStart" />
</New>
</Arg>
</New>
<New id="fieldNotificationProducerJmsConnectionFactory" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/fieldNotificationProducerJmsConnectionFactory</Arg>
<Arg>
<Ref id="fppServerConnectionFactory" />
</Arg>
</New>
<New id="fieldConsumerJmsConnectionFactory" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/fieldConsumerJmsConnectionFactory</Arg>
<Arg>
<Ref id="fppServerConnectionFactory" />
</Arg>
</New>
<!-- wrapper -->
<New id="fppWrapperServerConnectionFactory" class="org.apache.activemq.ActiveMQConnectionFactory">
<Set name="brokerURL">nio://localhost:61615</Set>
<Set name="redeliveryPolicy">
<New class="org.apache.activemq.RedeliveryPolicy">
<Set name="maximumRedeliveries">-1</Set>
<Set name="backOffMultiplier">2</Set>
</New>
</Set>
</New>
<New id="formNotificationConsumerFactory" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/formNotificationConsumerFactory</Arg>
<Arg>
<Ref id="fppWrapperServerConnectionFactory" />
</Arg>
</New>
<New id="inkProducerJmsConnectionFactory" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/inkProducerJmsConnectionFactory</Arg>
<Arg>
<Ref id="fppWrapperServerConnectionFactory" />
</Arg>
</New>
<!-- JMX/SENSORS -->
<New id="inkJmsQueueUrl" class="java.lang.String">
<Arg>service:jmx:rmi://localhost:2100/jndi/rmi://localhost:2099/jmxrmi
</Arg>
</New>
<New id="inkJmsQueueObjectName" class="java.lang.String">
<Arg>org.apache.activemq:BrokerName=formserver.broker,Type=Queue,Destination=inkJmsQueue
</Arg>
</New>
<New id="fieldNotifJmsQueueUrl" class="java.lang.String">
<Arg>service:jmx:rmi://localhost:2100/jndi/rmi://localhost:2099/jmxrmi
</Arg>
</New>
<New id="fieldNotifJmsQueueObjectName" class="java.lang.String">
<Arg>org.apache.activemq:BrokerName=formserver.broker,Type=Queue,Destination=fieldNotifJmsQueue
</Arg>
</New>
<New id="fieldJmsQueueUrl" class="java.lang.String">
<Arg>service:jmx:rmi://localhost:2100/jndi/rmi://localhost:2099/jmxrmi
</Arg>
</New>
<New id="fieldJmsQueueObjectName" class="java.lang.String">
<Arg>org.apache.activemq:BrokerName=formserver.broker,Type=Queue,Destination=fieldJmsQueue
</Arg>
</New>
<New id="formNotifiationTopicUrl" class="java.lang.String">
<Arg>service:jmx:rmi://localhost:2100/jndi/rmi://localhost:2099/jmxrmi
</Arg>
</New>
<New id="formNotifiationTopicObjectName" class="java.lang.String">
<Arg>org.apache.activemq:BrokerName=formserver.broker,Type=Queue,Destination=formNotifiationTopic
</Arg>
</New>
<New id="server.list" class="java.util.HashMap">
<!-- InkJmsQueue -->
<Put name="WRP">
<New class="java.util.ArrayList">
<Call name="add">
<Arg>
<New class="java.lang.String">
<Arg>http://localhost:8081</Arg>
</New>
</Arg>
</Call>
<Call name="add">
<Arg>
<New class="java.lang.String">
<Arg>http://localhost:8084</Arg>
</New>
</Arg>
</Call>
</New>
</Put>
<Put name="FORM">
<New class="java.util.ArrayList">
<Call name="add">
<Arg>
<New class="java.lang.String">
<Arg>http://localhost:8080</Arg>
</New>
</Arg>
</Call>
<Call name="add">
<Arg>
<New class="java.lang.String">
<Arg>http://localhost:8084</Arg>
</New>
</Arg>
</Call>
</New>
</Put>
<Put name="HWR">
<New class="java.util.ArrayList">
<Call name="add">
<Arg>
<New class="java.lang.String">
<Arg>http://localhost:8083</Arg>
</New>
</Arg>
</Call>
<Call name="add">
<Arg>
<New class="java.lang.String">
<Arg>http://localhost:8084</Arg>
</New>
</Arg>
</Call>
</New>
</Put>
</New>
<New id="fpp.form.jmx.properties" class="java.util.HashMap">
<!-- InkJmsQueue -->
<Put name="inkJmsQueueSize">
<New class="java.util.HashMap">
<Put name="urlQueue">
<Ref id="inkJmsQueueUrl" />
</Put>
<Put name="objectName">
<Ref id="inkJmsQueueObjectName" />
</Put>
<Put name="attribute">QueueSize</Put>
</New>
</Put>
<Put name="inkJmsConsumerCount">
<New class="java.util.HashMap">
<Put name="urlQueue">
<Ref id="inkJmsQueueUrl" />
</Put>
<Put name="objectName">
<Ref id="inkJmsQueueObjectName" />
</Put>
<Put name="attribute">ConsumerCount</Put>
</New>
</Put>
<Put name="inkJmsDequeueCount">
<New class="java.util.HashMap">
<Put name="urlQueue">
<Ref id="inkJmsQueueUrl" />
</Put>
<Put name="objectName">
<Ref id="inkJmsQueueObjectName" />
</Put>
<Put name="attribute">DequeueCount</Put>
</New>
</Put>
<Put name="inkJmsAverageEnqueueTime">
<New class="java.util.HashMap">
<Put name="urlQueue">
<Ref id="inkJmsQueueUrl" />
</Put>
<Put name="objectName">
<Ref id="inkJmsQueueObjectName" />
</Put>
<Put name="attribute">AverageEnqueueTime</Put>
</New>
</Put>
<Put name="inkJmsMaxEnqueueTime">
<New class="java.util.HashMap">
<Put name="urlQueue">
<Ref id="inkJmsQueueUrl" />
</Put>
<Put name="objectName">
<Ref id="inkJmsQueueObjectName" />
</Put>
<Put name="attribute">MaxEnqueueTime</Put>
</New>
</Put>
<!--FieldNotifJmsQueue -->
<Put name="fieldNotifJmsQueueSize">
<New class="java.util.HashMap">
<Put name="urlQueue">
<Ref id="fieldNotifJmsQueueUrl" />
</Put>
<Put name="objectName">
<Ref id="fieldNotifJmsQueueObjectName" />
</Put>
<Put name="attribute">QueueSize</Put>
</New>
</Put>
<Put name="fieldNotifJmsConsumerCount">
<New class="java.util.HashMap">
<Put name="urlQueue">
<Ref id="fieldNotifJmsQueueUrl" />
</Put>
<Put name="objectName">
<Ref id="fieldNotifJmsQueueObjectName" />
</Put>
<Put name="attribute">ConsumerCount</Put>
</New>
</Put>
<Put name="fieldNotifJmsDequeueCount">
<New class="java.util.HashMap">
<Put name="urlQueue">
<Ref id="fieldNotifJmsQueueUrl" />
</Put>
<Put name="objectName">
<Ref id="fieldNotifJmsQueueObjectName" />
</Put>
<Put name="attribute">DequeueCount</Put>
</New>
</Put>
<Put name="fieldNotifJmsAverageEnqueueTime">
<New class="java.util.HashMap">
<Put name="urlQueue">
<Ref id="fieldNotifJmsQueueUrl" />
</Put>
<Put name="objectName">
<Ref id="fieldNotifJmsQueueObjectName" />
</Put>
<Put name="attribute">AverageEnqueueTime</Put>
</New>
</Put>
<Put name="fieldNotifJmsMaxEnqueueTime">
<New class="java.util.HashMap">
<Put name="urlQueue">
<Ref id="fieldNotifJmsQueueUrl" />
</Put>
<Put name="objectName">
<Ref id="fieldNotifJmsQueueObjectName" />
</Put>
<Put name="attribute">MaxEnqueueTime</Put>
</New>
</Put>
</New>
<New id="fpp.form.ui.parameters" class="org.mortbay.jetty.plus.naming.Resource">
<Arg>
<Ref id="Server" />
</Arg>
<Arg>fpp/fpp.form.ui.parameters</Arg>
<Arg>
<New
class="com.visionobjects.myscript.fpp.ui.parameters.impl.UIParametersServiceImpl">
<Set name="jmxProperties">
<Ref id="fpp.form.jmx.properties"></Ref>
</Set>
<Set name="serverList">
<Ref id="server.list"></Ref>
</Set>
</New>
</Arg>
</New>
</Configure>
Thanks so much in advance.
-
Error in /tmp/applianceagent/scripts/Database.sh: Start database failed with exit code 2
Hello
I have set up the Demo appliance landscape for the openSAP course "Introduction to SAP Fiori UX", on AWS.
The frontend machine is OK, but the configuration and startup of the server machine has failed for some reason. When logging in with ssh to the server, this message is presented:
The Appliance Agent detected an error and terminated.
When asked, please provide the file /tmp/applianceagent_20141002-145658.tar.bz2.
Note that a restrictive iptables based firewall is still active.
I have attached the file (had to add .txt to the name to circumvent file type restrictions).
I noticed that the appliancedeploy.log ended with these lines:
Start database Execute /usr/sap/hostctrl/exe/sapcontrol -nr 02 -function StartWait 3600 20
02.10.2014 13:56:58
Start
OK
02.10.2014 14:56:58
StartWait
FAIL: Timeout
error in /tmp/applianceagent/scripts/Database.sh: Start database failed with exit code 2
Notice the 1 hour jump in time, and then the timeout error message.
Do any of you have any idea what could be causing this, and how to fix it?
Please let me know if you need any further information.
Best regards,
BoHi Hannes.
Trying to create and activate a new instance (version 5 of the Fiori appliance), I first got this message in the CAL instance overview list:
Instance Operation Failed
Operation Start failed on step Start start VAs with message: Start failed for VM SAP Server due to Amazon Web Services issue : AMAZON : The snapshot 'snap-c779ff64' does not exist.
Then I terminated the instance and tried over again. And this time the deployment worked - I have a running server, which responds to the SAP GUI, and shows the Fiori web page.
Thanks a lot for your quick help.
Best regards,
Bo -
I bought in december of 2008 a 2.4ghz macbook pro and I think the gpu is starting to fail. Can I still be covered for a change because of the faulty nvidia gpu?
If your computer qualifies - MacBook Pro: Distorted video or no video issues
If it does, call Apple Customer Relations or print out a copy of the article and bring it in to the repair shop. -
Issue while running page OC4J start up failed.
Hi,
I am working on two instances one is Local and another is in abroad.
Now when I am running simple Hello World Page by giving Local Instance connections The page is loading quickly and running fine.
Now when I am running the same Hello World Page by giving Abroad Instance connections The page load is taking almost 9-10 mins and running fine.
In the above cases what might be the issue with Abroad Instances for loading page.
1) Is it the Network Issue?
2) Is it the OC4J Issue?
Can anyone breif this senario and how to over come this issue.
And one more Issue is
Took the remote desktop of the Abroad Machine Installed JDeveloper in it and while running the Hello World page the Message OC4J start up failed is getting popedup in the Message.
In which cases we will get OC4J start up failed error.
Thanks,
Krishna
Edited by: user1000 on Feb 7, 2011 5:29 AMI am working on two instances one is Local and another is in abroad.What is your application release?
In the above cases what might be the issue with Abroad Instances for loading page.
1) Is it the Network Issue?Could be one or more.
Can you reproduce the issue with other Self-Service pages? Any performance issues with forms?
2) Is it the OC4J Issue?What about local users who access the same page from the same network, do they encounter the same performance issues?
Can anyone breif this senario and how to over come this issue.Before investigating the performance issues with the instance/server (which are discussed many times in the forum, so just search old threads for performance tuning and you will get many hits), I would suggest you answer the above two questions to determine whether this is a network issue or an instance/server issue.
And one more Issue is
Took the remote desktop of the Abroad Machine Installed JDeveloper in it and while running the Hello World page the Message OC4J start up failed is getting popedup in the Message.
In which cases we will get OC4J start up failed error.What is the error?
Thanks,
Hussein -
I have a 6 week old 4s running 5.1.1. Started recieving "failed sim" message yesterday. this leaves me with no cell service. Shutting down and turning back own seems to alleviate problem temporarily. It has happened three times now. Help.
Sounds like you have a battry issue but don't want to believe it.
If a car was running fine on one tank of gas, then you filled it up with another tank of gas and it began to run funny, one might suspect that tank of gas. But let's just say coincidence blew a valve-- would you think the new tank of gas was the culprit?
BUT WAIT!! It just might have been! The gas could have been of higher octane and put more more strain on the valves; you know, like going from 87 octane (OS6) to 93 octane (OS7) and showing you the engine was on the edge of compromise.
Sometimes you have to go with common sense. If everything else is ruled out, it must be the battery. And if it runs fine one moment in OS6 but immediately ***** in OS7, I'd believe my battery was suspect-- though comfy-- in OS6 but the OS7 showed its true power.
Moreover, if you had the answer-- or didn't want to believe someone's more competent advice-- why did you even call? You've already shown that you don't know much when you asked if you could go backwards after setting up the new OS as a new phone.
Additonally, if you're such the know-it-all, but yourself the $29 battery and put it in yourself. It's a piece of cake.
<Edited By Host> -
N8: Phone Start-up failed. Contact your retailer!!...
Hello Nokia,
I just woke up to find this error on my N8 and now i can't turn on the phone bacuase after the Nokia Logo then this message comes "Phone Start-up failed. Contact your retailer". What should i do to get it back cos i can't do anything now since all my information is on my phone.
I wanted to even connect it to the computer and use it as a USB drive to get some of my info but the msg still appears.
Pls help
Kind regardsIf your not getting to the homescreens then it's likely you have a very diferent issue to the one described in the post linked,
If you get to the homescreens then it's likely either the nokia sign in thing or just too much starting at once that's hitting you,try putting the phone into offline mode before it comes up and letting it complete its boot,
otherwise if it is happening at the nokia logo screen, then it sounds like something has gone badly wrong,
if you are running anna then you may need to perform a multi fingered reset which will erase the data stored on the phone and restore it to an out of box state, before recovering from a back up that you have made previously,
If that deosn't work then a trip to a nokia care point is your only course of action -
XL Reporter Start Up Failed - "Report Initialize" Description (667)
Hi experts,
I use SAP B1 2007 PL34. I'm trying to execute an XL reporter report and I got this message
"An Error Occurred During The Process "Report Initialize". Description(667) metainfo.XML not Found! (Please contact the administrator to fix the repository connection) XL reporter Start Up failed"
Afterwards the report open but had just the headers. I already searched through the forums but I only saw Description (666) errors, How can I resolve this ?
Any help will be greatly appreciated.Hi,
In order to resolve the reported issue, please try the following solution:
1. Please make sure that (a)Microsoft® .NET Framework 1.1 and (b) Microsoft® MDAC 2.7 or higher is installed in the machine, where you are running XL reporter if you have both .Net 1.1 and .Net 2.0 is installed then please refer to note no. 898635.
2. Once the error message popped up, please kill all processes of SBO and XLR, then restart. Try to see if the message still exists.
3. Goto Excel and check if the Macro Settings is correct as per note 853821.
4. Check the authorization of the folder C:Program FilesSAPSAP Business OneAddOnsXLRXLReporter to see if users have right to edit document in that folder.
5. If still you have the same issue, could you please copy a healthy Metainfo.xml from your workstation where the XL reporter is working fine to the workstation where you are facing the issue. After modifying the Database info in the Metainfo.xml file, execute XLR again.
Note: The Metainfo.xml file should be available in the following location :
C:Program FilesSAPSAP Business OneAddOnsXLRXLReporter.
hope it helps,
Regards,
Ladislav
SAP Business One Forum Team -
Hi There,
I'm getting the errors below and but I have not got any BSOD.
The errors I'm getting in eventviewer are Pku2ulog failed to start 0xC--35, Negolog failed to start, IDListenLog failed to start, P2PLog failed to start and HomegroupLog failed to start, all with the same failure code 0xC-- 35.
This is what the logs files says about each error.
Pku2ulog:
Unknown( 10): GUID=c36a26fb-03a9-d591-3984-dc17e4a48527 (No Format Information found).
p2plog:
Unknown( 89): GUID=fc9d5ca5-e6c8-627c-be74-e6e0a98bbf57 (No Format Information found).
negolog:
Unknown( 37): GUID=2553184f-6f2a-3198-ddb7-93ab1ad2d125 (No Format Information found).
idlistenlog:
Unknown( 10): GUID=418a567f-b393-1423-26aa-123149ef8882 (No Format Information found).
homegrouplog:
Unknown( 12): GUID=96f7a94a-4343-6ede-ff2b-dd1dafeed500 (No Format Information found).
However, the 'Unknown(xx)' number changes times to times.
Could you help me please?
Thank you very much for your attention.
Best Regards.Hi,
If you have Home group set up, please go to Control Panel – Network and Sharing Center. Choose homegroup and sharing options and click “Leave the homegroup”.
Juke Chou
TechNet Community Support -
Nokia C7 Phone Start-Up Failed
A good friend of mine has a Nokia C7. He and I both used to use SPB Mobile Shell, but I no longer do. However, my friend is still using the SPB software.
Sometimes when my friend turns on his phone, the usual Nokia information appears, then the "loading" message that SPB is being loaded, and then he gets a message:
Phone Start-Up Failed.
Contact the retailer
From searching the forums, I'm pretty sure this is a Nokia message, and not something from SPB.
People suggested removing the memory card, but this phone doesn't have a memory card.
Other people suggest a "three-finger reset".
I have just asked my friend to remove the battery for a few minutes, then re-start the phone. I don't know yet if this will help.
My next option would be to remove the SPB software, but from what I'm reading, this is not likely to be the problem - and my friend still relies on the SPB Mobile Shell for daily use.
My last option is the three-finger reset. What they suggested was "Hold Menu Key,Volume Down Key,Camera Key and press the switch on button (power button) and when your phone vibrates release the switch on button (power button) and keep holding the Menu Key,Volume Down Key,Camera Key and wait for a while and your phone will be as good as new". If I do the three-finger reset, is this going to remove all the data on his phone, so I need to set everything up for him again?My C-7 has the same problem. I'm not surprised since thousands of this handset (along with the N8) are also affected.
This is a design-defect problem that NOKIA recognizes but refuses to address properly By purchasing this handset we have all thrown our money to the winds. We are not alone; Considering NOKIA's current stock price nose-dive, the company's shareholders are in the same boat.
This is an absolute travesty. Were it not for NOKIA's "killer application" (its off-line turn-by-turn mapping program, of course), I would have jumped ship long ago. Although I feel very sorry for myself for having bought such a problematic device, I feel much worse for the employees of NOKIA (at least for those who still remain employed after the recent mass purgings in a desperate attempt by the C-levels to keep the company afloat). Surely they must also be able to see the writing on the wall indicating that their time is nearly up The company will go under.
Horrible product quality, arrogant refusal to properly address the defects, oblivious attention to the market and an unfathomable and highly misguided sell-out to Microsoft has turned this once great company into a puddle of mush, slowly seeping into the cracks of the floor over which Samsung and Apple now gleefully dance.
Shame, Nokia. Shame.
* By the way: If you want to breath life back into your C-7 or N-8, charge the beast and then place it into the freezer for a few minutes. Since the root problem is due to overheaded boards, this action will quite surprisingly, cool the unit back down to whence it will once again start. -
Start VM failed: Domain CCCCCCCC already exists with ID NNN
Hi,
I try to start an Oracle VM (currently stopped), the job related to the start action fails and the VM is not started.
The job log is:
Message: OVMAPI_6000E Internal Error: OVMAPI_5001E Job: 1427440127270/Start Vm: ora-aa-u004/Start Vm: ora-aa-u004, failed. Job Failure Event: 1427440128820/Server Async Command Failed/OVMEVT_00C014D_001 Async command failed on server: ovms-aa-us001.mgmt.mydom.com. Object: ora-aa-u004, PID: 32049, Server error: Command: ['xm', 'create', '/OVS/Repositories/0004fb0000030000b3397000b8916714/VirtualMachines/0004fb0000060000b17c866636533d63/vm.cfg'] failed (1): stderr: Error: Domain '0004fb0000060000b17c866636533d63' already exists with ID '199' stdout: Using config file "/OVS/Repositories/0004fb0000030000b3397000b8916714/VirtualMachines/0004fb0000060000b17c866636533d63/vm.cfg". , on server: ovms-aa-us001.mgmt.mydom.com, associated with object: 0004fb0000060000b17c866636533d63 [Fri Mar 27 08:08:48 CET 2015] [Fri Mar 27 08:08:59 CET 2015]
Previously I tried to migrate it to another Server of the same pool, the migration Job was successful, the VM resulted running, but actually it was cycling rebooting itself every minutes, after a few steps of the booting process. So I killed it (stopped it) and migrate it back (while in a stopping state) to the original server. When I start it on the original Server, I get the error above.
Please note that "xm list" on the Server doesn't show that this VM 0004fb0000060000b17c866636533d63 is running, nor that any VM with ID 199 is running.
Any suggestion? Thanks
OscarI don't think that advsiing to change the UUID inside the vm.cfg file is too beneficial. It might solve the immediate problem, but it won't make the "ghost" dom go away, which will need a OVMS boot to get rid off.
Further more it seems like Oracle has fixed this issue and will likely roll the patch out in an upcoming update to xen. Users who have OVM under CSI can request a patch mentioning this BUG: 20687187
I just received that patch and I will try that out tonight.
Cheers,
budy
Maybe you are looking for
-
10.6.8. Firefox is my default browser (up to date). I check Add-ons Manager and get a notidfication that Mozilla has determined tha the plug-in (7.6.6) is vunerable and should be updated. I go to the link and get this message: QuickTime Plugin 7.7.0
-
hi! its my first day using my iphone4, and i have a little problem, please help me. i ve written some events in my calendar, and they have been deleted, just after i stepped to another month.so for example i wrote an event to dec 24th, and it stayed
-
SOAP (Receiver): error occured: Connection refused:
Hi experts, I have a RFC -> XI -> SOAP scenario and while testing the same it gets cancelled with the following errors: SOAP: error occured: com.sap.aii.af.ra.ms.api.RecoverableException: Connection refused: connect: java.net.ConnectException: Connec
-
BI 7.0- Filled Cube- Change Attribute as NAVIGATIONAL and for BEX
Hi, We are on BI 7.0. I have the following task: Making an Attribute NAVIGATIONAL and making it available in the BEX for a Filled LIVE Cube. Questions: 1. Is it done through Remodelling or is it just change the attribute to NAV and add the Attribute
-
Memory full: Close some applications
Hi there I own a 701 running Belle Feature Pack 1, updated 4 months ago. The update gave me a nicer battery life, though I have a strange application with the name 'aknspasrv' that is constantly running in the background . I got to know about this fr