ESB/DB adapter and use of sequence,,,

I've tried to implement a DB adapter - for inserting data into one table with a PK.
In addition, I've created a sequence (start with 1).
I've checked use native sequecing, preallocation set to 1, attached the rigth sequence to the right table/pk.
Now, I keep getting the error "preallocarion size doesn't match..." - except if i change the start with clause to 51 - then it works!
What's my problem??
regards, Henrik

I've tried to implement a DB adapter - for inserting data into one table with a PK.
In addition, I've created a sequence (start with 1).
I've checked use native sequecing, preallocation set to 1, attached the rigth sequence to the right table/pk.
Now, I keep getting the error "preallocarion size doesn't match..." - except if i change the start with clause to 51 - then it works!
What's my problem??
regards, Henrik

Similar Messages

  • Dynamic attachment name with receiver mail adapter and use mail package

    We need to send mapped XML payload as attachment (with dynamic name) to a recepient (recepient email id is part of input xml payload, but not part of the mapped XML payload).
    I could probably do this using the adapter module (as per the following link),
    http://wiki.sdn.sap.com/wiki/display/XI/Adapter%20Module%20PI%207.0%20Set%20Attachment%20Name?bc=true
    I would like to explore if this would be feasible using Mail package and XI payload.I already have a Java mapping that is converting the input XML to required Output format. If I am using Mail package (XI Payload), how do I go about sending this Output XML from java mapping as attachment to email id available in the input payload?

    Hi,
    1) XML payload as attachment (with dynamic name)
    2) recipient (recipient email id is part of input xml payload, but not part of the mapped XML payload)
    These two is possible by using Mail Package. You have a standard xsd for mail package which you can download from the SAP Note 748024.
    The xml created in you java mapping which will be your attachment should be put into the <content> tag of the mail package xml structure. and the file name can be set in the <Content_Type> tag.
    <?xml version="1.0"; encoding="UTF-8"?>
    <p2:Mail xmlns:p2="http://sap.com/xi/XI/Mail/30">
    <Subject>My Invoice</Subject>
    <From>from email address<;/From>
    <To>to email address</To>
    <Content_Type>text/plain;name="MyFile.csv";</Content_Type>  --> file name here
    <Content>123;A49;aaa</Content>   -> attachment xml here
    </p2:Mail>
    And you have to select MailPackage in the receiver mail adapter.
    Regards,
    Aravind

  • ESB DB adapter and error logging

    Hi !
    I need a DB adapter in ESB to read records from a table and do a logical delete (update a status column) .
    I can get it to work om my laptop, but not in our dev machines.
    I noticed that if I change the the 'mcf-properties' in the wsdl-file for the READ function like this
    mcf.DriverClassName="oracle.jdbc.OracleDriver" mcf.PlatformClassName="oracle.toplink.platform.database.oracle.Oracle10Platform"
    mcf.ConnectionString="jdbc:oracle:thin:@localhost:1521:ORCLAAAAAA"
    mcf.UserName="soatest" mcf.Password="A932C53E63FFDE3D4A8267B2FCE4A0044C1B70BFD42DD194"
    so that is wrong I never get any error in any log-file I found.
    This makes is very tiresome to debug.
    Is there a log where I can find an error message ?
    If not , what should I do ?

    Hello Everyone,
    I am stuck with the ESB's "logging" behavior. Due to some problems we had increased the Logging level to FINEST for some and as a result there were too many messages - mainly "Traces" -generated in /../oc4j/log.xml Now the problem is that i am seeing that ESB maintains only 10 to 12 log files.
    My query is does it archives the older log files somewhere- if yes then which location?
    -Or does it simply overwrites the files (that doesnt seems likely)?
    For example: While searching the OC4J Diagnostic Logs from Enterprise Manager Console it is showing that there are 10 selected log files.
    But where are the older log files. We need those badly as there are some issues we are trying to fix hinged on the Error Messages.
    Thanks
    --debashis                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Can i turn off integrated video adapter and use only discret video card?

    pavilion g6 2284sr. I have not menu in BIOS to do this. I have not menu in Catalyst control center to activate discret card for all processes. i have not any rules for do anything with this problem. Pls can you give me bios programm version that wiil give me rules. I don't know is my discret card all right. Please do not describe me how i must to assign programms for each graphic adapter.
    And where i can read information about all components of hardware for this notebook.

    For each clip you can go to the audio portion of inspector and uncheck/disable the tracks you don't desire. That would take longer than Tom's method, but I think the audio won't show up as a blank later on.

  • Creating/Testing and Using Agents for ODI Sequence

    Hi
    can you/anyone please tell/guide me how to Create a agent and use ODI sequence when i am doing File-to-File Mapping?
    I created an ODI sequence and an agent too. but i am unable to use this sequence coz it gives error like Connection fail for agent.
    and more over when I am testing my agent for connection my Application hangs and I have no choice but to close it forcefully and re-start.
    I am giving host as my target server IP and Port as my target's port (Same as defined in DataServer' URL).
    Please Advise/Help/Suggest.

    Hi
    can you/anyone please tell/guide me how to Create a agent and use ODI sequence when i am doing File-to-File Mapping?
    I created an ODI sequence and an agent too. but i am unable to use this sequence coz it gives error like Connection fail for agent.
    and more over when I am testing my agent for connection my Application hangs and I have no choice but to close it forcefully and re-start.
    I am giving host as my target server IP and Port as my target's port (Same as defined in DataServer' URL).
    Please Advise/Help/Suggest.

  • Outbound HTTP adapter and URL parameters

    Hi all
    I'm having some trouble with a XI scenario I'm supposed to implement.
    I should get invoices from a vendors webserver using a url with parameters (ex. http://myvendor.com/getinvoice.jsp?invoiceid=12345) and send it as INVOICE IDoc to the R/3.
    I thought that would be an easy one using the Plain HTTP-Adapter but I can't figure out how to build the URL. Is there a way to do that, or do I need to implement my own adapter??
    Thanks in advance
    Stefan

    Hi experts ,
    I have this scenario from Legacy to XI to external app server.I have a test jsp to execute that functionality .Its a jsp which has 1 textarea named "test" and when I click on the submit buton I get a response back.This way I am able to test this independently.Now from XI when I am executing my scenario I am getting status code '1250' and message as ' http request(test) is null'.Now in the scenario in http adapter I just provide the target host : ip of server ,
    service number : port no ,
    path: the container or the request handler. But this scenario fails and gives me the above erroneous response.Now Basically I am not able to get how to send the value to the textarea "test"? please provide help as soon as possible.Do we have to put the name of the jsp in the "path" in http adapter and use prolog as test= or should it be &test= .I tried this but it doesnt work.So please provide help on this as soon as possible or please suggest a solution at [email protected]
    Thanx in advance,
    Akshata

  • How to operate multiple querys using DB Adapter and 'Execute Custom SQL'

    I have a requirment that I need to create database adapter in your BPEL process with 'Execute Custom SQL' to operate multiple query in DB in one atomic
    here are the details:
    inbound request:
    <ns1:Query_bpelProcessRequest>
    <ns1:input>
    <ns1:ItemDetail>
    <ns1:ItemID>1123DDDS</ns1:ItemID>
    </ns1:ItemDetail>
    <ns1:ItemDetail>
    <ns1:ItemID>1126EWWA</ns1:ItemID>
    </ns1:ItemDetail>
    <ns1:ItemDetail>
    <ns1:ItemID>11208FSAA</ns1:ItemID>
    </ns1:ItemDetail>
    </ns1:input>
    </ns1:Query_bpelProcessRequest>
    I use for-each fuction in XSLT to mapping the all ItemID value:
    <xsl:template match="/">
    <xsl:for-each select="/tns:Query_bpelProcessRequest/tns:input/tns:ItemDetail">
    <ns1:QueryFromDB_Input>
    <ns1:ItemID>
    <xsl:value-of select="tns:ItemID"/>
    </ns1:ItemID>
    </ns1:QueryFromDB_Input>
    </xsl:for-each>
    </xsl:template>
    and in DB Adapter I use the 'Execute Custom SQL' to query the CONTENT value according the ItemID value:
    select distinct CONTENT from agile.item where ITEM_NUMBER=’<ItemID>’
    However, in the result, It only query the first item value for <ns1:ItemID>1123DDDS</ns1:ItemID>
    <<QueryFromDB_InputVariable><part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="QueryFromDB_Input_msg">
    <QueryFromDB_Input xmlns:ns1="http://xmlns.oracle.com/pcbpel/adapter/db/QueryFromDB" xmlns="http://xmlns.oracle.com/pcbpel/adapter/db/QueryFromDB">
    <ns1:ItemID>1123DDDS</ns1:ItemID>
    </QueryFromDB_Input>
    </part></QueryFromDB_InputVariable>
    <QueryFromDB_OutputVariable><part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="QueryFromDB_OutputCollection">
    <QueryFromDB_OutputCollection xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://xmlns.oracle.com/pcbpel/adapter/db/QueryFromDB">
    <QueryFromDB_Output>
    <ITEM_NUMBER>1123DDDS</ITEM_NUMBER>
    <CONTENT >SJIFESSFFJ</CONTENT >
    </QueryFromDB_Output>
    </QueryFromDB_OutputCollection>
    </part></QueryFromDB_OutputVariable>
    the other two querys are not operated.
    what can I do to operate multiple querys??
    Thanks

    Hi Rod,
    I are using while loop and assign array inputvalue to the inputvarable of DBadapter now, but actually it doesn't work.
    Throw expection
    <selectionFailure xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/"><part name="summary"><summary>XPath query string returns multiple nodes.
    According to BPEL4WS spec 1.1 section 14.3, The assign activity part and query /client:ItemsQuery_bpelProcessRequest/client:input/client:inputDetail/client:ProductID["ItemIndex"] should not return multipe nodes.
    Please check the BPEL source at line number "89" and verify the part and xpath query /client:ItemsQuery_bpelProcessRequest/client:input/client:inputDetail/client:ProductID["ItemIndex"].
    Possible reasons behind this problems are: some xml elements has maxOccurs > 1 or the xml data is invalid according to XML Schema.
    To verify whether XML data received by a process is valid, user can turn on validateXML switch at the domain administration page.
    </summary>
    </part></selectionFailure>
    my inbound XSD:
    <element name="ItemsQuery_bpelProcessRequest">
    <complexType>
    <sequence>
    <element name="input" type="tns:inputType"/>
    </sequence>
    </complexType>
    </element>
    <complexType name="inputType">
    <sequence>
    <element name="inputDetail" minOccurs="0" maxOccurs="unbounded">
    <complexType>
    <sequence>
    <element name="ProductID" type="string" minOccurs="0"/>
    </sequence>
    </complexType>
    </element>
    </sequence>
    </complexType>
    <element name="ItemsQuery_bpelProcessResponse">
    <complexType>
    <sequence>
    <element name="result" type="tns:outputType"/>
    </sequence>
    </complexType>
    </element>
    <complexType name="outputType">
    <sequence>
    <element name="ItemOutput" minOccurs="0" maxOccurs="unbounded">
    <complexType>
    <sequence>
    <element name="item_id" type="string" minOccurs="0"/>
    </sequence>
    </complexType>
    </element>
    </sequence>
    </complexType>
    DB Adapter XSD:
    <xs:schema targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/db/QueryItem" xmlns="http://xmlns.oracle.com/pcbpel/adapter/db/QueryItem" elementFormDefault="qualified" attributeFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">
    <xs:element name="QueryItem_Input" type="QueryItem_Input"/>
    <xs:complexType name="QueryFrom_Input">
    <xs:sequence>
    <xs:element name="ProductID" type="xs:string" nillable="true"/>
    </xs:sequence>
    </xs:complexType>
    <xs:element name="QueryItem_OutputCollection" type="QueryItem_OutputCollection"/>
    <xs:complexType name="QueryItem_OutputCollection">
    <xs:sequence>
    <xs:element name="QueryItem_Output" type="QueryItem_Output" minOccurs="0" maxOccurs="unbounded"/>
    </xs:sequence>
    </xs:complexType>
    <xs:complexType name="QueryItem_Output">
    <xs:sequence>
    <xs:element name="item_id" type="xs:string" nillable="true"/>
    </xs:sequence>
    </xs:complexType>
    </xs:schema>
    the bpel assign:
    <assign name="Initial_Index">
    <copy>
    <from expression="0"/>
    <to variable="ItemIndex"/>
    </copy>
    </assign>
    <while name="While_1"
    condition="bpws:getVariableData('ItemIndex')&lt;ora:countNodes('inputVariable','payload','/client:ItemsQuery_bpelProcessRequest/client:input/client:inputDetail/client:ProductID)">
    <sequence name="Sequence_1">
    <assign name="Assign_QueryInput">
    <copy>
    <from variable="inputVariable" part="payload"
    query='/client:ItemsQuery_bpelProcessRequest/client:input/client:inputDetail/client:ProductID{bpws:getVariableData('ItemIndex')}'/>
    <to variable="QueryItem_InputVariable"
    part="QueryItem_nput_msg"
    query="/ns2:QueryItem_Input/ns2:ProductID"/>
    </copy>
    </assign>
    <invoke name="Invoke_QueryDB" partnerLink="QueryItem"
    portType="ns1:QueryItem_ptt"
    operation="QueryItem_PSFT"
    inputVariable="QueryItem_InputVariable"
    outputVariable="QueryItem_OutputVariable"/>
    <assign name="Assign_Output">
    <copy>
    <from variable="QueryItem_OutputVariable"
    part="QueryItem_OutputCollection"
    query="/ns2:QueryItem_OutputCollection/ns2:QueryItem_Output/ns2:item_id"/>
    <to variable="outputVariable" part="payload"
    query='/client:ItemsQuery_bpelProcessResponse/client:result/client:ItemOutput/client:item_id{bpws:getVariableData('ItemIndex')}'/>
    </copy>
    <copy>
    <from expression="bpws:getVariableData('ItemIndex')+1"/>
    <to variable="ItemIndex"/>
    </copy>
    </assign>
    </sequence>
    </while>
    I use {} instead of  []  for array,  because [] seams not reveal in this message board
    seems I can't assign array values to the DB inputvalue, Are there any solutions for this ?
    I still haven't found any way for operating multiple querys using DB Adapter.
    Thanks
    Edited by: user1065212 on 07-Jan-2010 19:39
    Edited by: user1065212 on 07-Jan-2010 19:41
    Edited by: user1065212 on 07-Jan-2010 19:44
    Edited by: user1065212 on 07-Jan-2010 19:45

  • Process multi-record & multi-record-format files using ESB & File Adapter

    I am looking to process/parse an in-bound file with the following make-up and to load into a database table using the File Adapter, ESB and DB Adapter.
    File Make-Up:
    - each line in the file is a record
    - each record is made up of 12 fields
    - there are multiple record types denoted by the first field in the line
    - record types may or may not have common fields
    - where there are common fields, the field may be in different columns
    - each record is to be inserted into a database table
    Sample File:
    3,,"03-0243-0188132-00",.20,26,075,"","000000006026","","","22/04/08",03 1303
    3,,"03-0243-0188132-00",20.00,26,075,"","","","","22/04/08",03 0579
    5,,"03-0243-0188132-00",99.60,,,"OPENING BALA",,,"ACME GROUP","22/04/08",
    6,,"03-0243-0188132-00",99.60,,,"CLOSING BALA",,,"ACME GROUP","22/04/08",
    8,,"03-0243-0188132-00",-346119.05,16,000,"DEBITS",,,,"22/04/08",
    8,,"03-0243-0188132-00",346119.05,349,050,"CREDITS",,,,"22/04/08",
    9,,"03-0243-0188132-00",-346119.05,16,000,"DEBITS",,,,"22/04/08",
    9,,"03-0243-0188132-00",346119.05,349,050,"CREDITS",,,,"22/04/08",
    Record Types and corresponding format:
    3, Corp ID, A/C Number, Trans Amt, Serial Number, Trans Code, Particulars, Analysis Code, Reference, Other Party Name, Transaction Date, Originating Bank
    5, Corp ID, A/C Number, Opening Balance, Serial Number, Trans Code, Particulars, Analysis Code, Reference, Other Party Name, Transaction Date, Originating Bank
    6, Corp ID, A/C Number, Closing Balance, Serial Number, Trans Code, Particulars, Analysis Code, Reference, Other Party Name, Transaction Date, Originating Bank
    8, Corp ID, A/C Number, Amount, Number, 000, “DEBITS”, Analysis Code, Reference, Other Party Name, Transaction Date, Originating Bank
    8, Corp ID, A/C Number, Amount, Number, 050, “CREDITS”, Analysis Code, Reference, Other Party Name, Transaction Date, Originating Bank
    9, Corp ID, A/C Number, Amount, Number, 000, “DEBITS”, Analysis Code, Reference, Other Party Name, Transaction Date, Originating Bank
    9, Corp ID, A/C Number, Amount, Number, 050, “CREDITS”, Analysis Code, Reference, Other Party Name, Transaction Date, Originating Bank
    Please note that record types 8 and 9 have 2 fixed fields.
    I have tried playing around with the File Adapter and the ESB but not having much luck. Can someone provide any suggestions on how I can handle this?

    James,
    Thanks for your prompt response. I have come across your post previously.
    Please excuse my in-experience (very new to SOA and Oracle SOA Suite) but i have not understood how your post regarding the manual creation of an XSD will assist with my problem. Could you possibly further elaborate on the overall approach i should be taking?
    Regards,
    Simon

  • Sending plain request to web service using receiver sender adapter and PI and expecting as attachment as response

    Hi
    In my scenario,we are sending plain request to web service using receiver sender adapter and PI will receive response as excel attachment. What are standard module required to achieve this and sequence? or checking Keep attachment box will help us to achieve this? 
    is it possible to receive excel sheet as attachment from receiver soap adapter ?
    Thanks in Advance

    Hi,
    This issue might be due to the invalid .pem certificate file.
    Make sure to include the beginning and end tags on each certificate.                   
    The result should look like this:                
    -----BEGIN CERTIFICATE-----
    (Your Primary SSL certificate: your_domain_name.crt)
    -----END CERTIFICATE-----
    -----BEGIN CERTIFICATE-----
    (Your Intermediate certificate: DigiCertCA.crt)
    -----END CERTIFICATE-----
    For more detailed information, you could refer to:
    https://www.digicert.com/ssl-support/pem-ssl-creation.htm
    Regards

  • How to generate .pdx file using File Adapter and FTP Adapter

    Hi,
    is it possible to genearate .pdx file using oracle ESB Adapters(File Adapter and FTP adapter).
    Can you anyone guide me.
    Thanks,
    Raj.

    hi,
    regarding report, there is a dedicated report forum. you should post there.
    but answer for your question is form is nothing to do with the pdf generation. you can call the report from the as usual.
    In the report you should set the properties like
    destype to 'file'
    desname to 'path with file name'
    desformat to 'pdf'

  • LogicalDeletePollingStrategy adapter running multiple updates and using CPU

    We have multiple SOA processes that poll tables in a database with a Logical delete polling strategy. After polling the table the db adapter does an update to flag the record as read.
    We have a production database and test database for the source system, and production and test SOA 11.1.1.4 systems. After cloning our production database to our test database, I will see the update statement for the adapter running multiple times in the test database. However, their are no records in the table that meet the criteria for the polling.
    The polling frequency is every 10 minutes, and if the update statement did anything it would take less than 1 second. However I will see 5-10 copies of the update statement running and using resources.
    Has anyone seen a db apapter do this?

    maybe unit of order and unit of work can help you on that, though i haven't any experience on both topics :
    http://download.oracle.com/docs/cd/E12840_01/wls/docs103/jms/uow.html
    http://download.oracle.com/docs/cd/E12840_01/wls/docs103/jms/uoo.html
    or the mediator supports some sort of sequencer, see : http://www.xenta.nl/blog/2010/05/14/oracle-soa-suite-11g-resequence-messages-in-mediator/

  • Esb parallel processing problems with jms adapter and bpel

    Hi,
    I have esb project which dequeues from a jms adapter and then the esb router calls a bpel process. This bpel process takes about 10 seconds. The first step this bpel does is to return true ( to the client) to the esb router so the ESB thinks he is ready. This does not work.
    Now if I use in the esb router asyn routing rule to the bpel ws then the esb dequeus all the messages from the queue. All the esb entries are green. But the esb starts one for one the bpel process and then updates the esb entry with a new start time ( very strange) .
    If I use a sync routing rule then it dequeues and call the bpel process one for one.
    How I can parallel proces the jms messages ,because I have 2 quad cores cpu's . Async routing rules looks like the solution.
    How can the esb detects the bpel is still running even with the first action in bpel is to return true. I expected when the esb retrieves true from the bpel ws it ends the current esb entry and goes on with the next. So the total esb time takes a few seconds and not so long as the last the bpel proces finishes.
    And why is he updating the starting time.
    Thanks Edwin
    Message was edited by:
    biemond

    I have esb project which dequeues from a jms adapter
    and then the esb router calls a bpel process. This
    bpel process takes about 10 seconds. The first step
    this bpel does is to return true ( to the client) to
    the esb router so the ESB thinks he is ready. This
    does not work. I am not sure if it can ever work, if you reply and then still proceed with your BPEL process.
    Here is something I would like to suggest:
    Can you try ESB -- (sync) --> BPEL, where BPEL process itself is Async. In that case, esb will consume all the messages very fast and BPEL will get that message and put in Delivery Queue and reply back to ESB. Now BPEL will process them simultaniously based Receiver/Worker threads defined in your env.
    HTH,
    Chintan

  • Null/Empty Strings use in ESB Database Adapter

    Hi
    I'm trying to use a database adapter to execute an update on a table with a composite primary key; one of the primary key columns sometimes contains an empty string, however whenever I try to call the adapter, it always converts this to a null value. Is there an easy way to force the adapter to use an empty string instead of a null?
    Thanks.

    the idea here is to execute the dbms statement, or the setpolicycontext statement in a db session, and being able to execute the next sql statement in the same db session.
    This is possible with consecutive database adapters sharing the same db session.
    and two db adapters sharing the same db session is possible, if you make sure that the bpel is participating in the db transaction which can be made possible via xa db connections.
    Hope this helps,
    Write back in case you need more info.

  • I have a targus 4.0 bluetooth usb adapter and so i can pair my iphone 4s and ipad air wirelessly, it seems to pair ok but when i try to connect i get a error message or not compatible. can some one tell me if it i can use this

    i have a targus 4.0 bluetooth usb adapter and so i can pair my iphone 4s and ipad air wirelessly, it seems to pair ok but when i try to connect i get a error message or not compatible. can some one tell me if it i can use this bluetooth with my devices, thanks

    sos1der wrote:
    pairing the apple equipment is not a big deal just wanted to add songs from itunes wirelessly.
    You can only add songs to your iOS device from iTunes via Wi-Fi sync or via your cable, not Bluetooth.
    sos1der wrote:
    but i tried paring my LG bluetooth so i can listen to music on my computer wirelessly buy it gives me the same error message
    That's an entirely different issue, unrelated to your iOS devices.

  • I've just hooked my 20" iMac up to my Toshiba 37" HDTV using a mini dvi-HDMI adapter, and works well, EXCEPT for the green tinge (or hue) that is showing up on my TV. Any suggestions or ideas?

    I've just hooked my 20" iMac display up to my Toshiba 37" HDTV using a mini dvi-HDMI adapter, and everything works well, EXCEPT for the green tinge (or hue) that is showing up. Everything else looks pretty good though..... The color that is on my iMac is still good, Its just green on the TV.
    Anyone have suggestions or ideas?

    Try opening the Display System Preferences, then click on the Color options in the Display preferences window that appeared on the Toshiba display. Click on the Calibrate button and follow the instructions for creating a custom ColorSync profile that will hopefully solve the green tinge issue. The Apple Display Calibrator Assistant software that launches when you click on the calibrate button will walk you through the process.Assuming that the green tinge is minor and that you don't have a more serious cable or hardware issue, I am hopeful the results will be worth it.

Maybe you are looking for