ESS BP-50.4 Benefit Enrollment - Dependant Selections

Hi - I have installed the ESS BP 50.4 and for benefit enrollment all of the screens that all you to select eligible dependants - the check box shows at the top of the screen when the dependant name shows in a table at the bottom of the screen....how/where do I correct this?
Thanks - Janet

Did you ever resolve this issue? I am experiencing the same issue.

Similar Messages

ESS Benefit Enrollment Critical Error

We are getting a Crtical Error when we try to save ESS Benefit Enrollment in ESS Portal
The error says:
Field Symbol has not yet been assigned, error key: RFC_ERROR_SYSTEM_FAILURE.
Please advice

Amr,
It could possibly be related to your patch level. Check this [thread|"Field symbol has not yet been assigned" Error on Family data iview; out.
Good Luck!
Sandeep Tudumu

Who will do benefit enrollment? third party or In sap itself? who is the third party vendor?

who will do benefit enrollment? third party or In sap itself? who is the third party vendor?

Hi Rakesh,
Who should handle benefit enrollement depends on client requirement.
In SAP Benefit Administration module we do have enrollment function.
Here is the document
http://help.sap.com/saphelp_46c/helpdata/en/7e/8a5f51545711d1891c0000e8322f96/content.htm
Client may chose to only store benefit related information and take help of other third party vendor and use interfaces to communicate it to SAP for payroll and master data maintenance.
Aon Hewitt is one of the well known vendors. Might be more not sure of all names.
Hope it answers your question.
Regards,
Jignya

Benefit enrollment confirmation form

Hello Expert,
Would you please tell how to check which benefit enrollment confirmation form is called from the ESS side. We see the differences in the result when called from SAP and when called from ESS.
Also could the ESS transaction be called from SAP side. If so how and whats the transaction.
Thank you very much.
saplover

Hi.
How solve this issue=
Kind regards

Problem while creating row with dependent select one choice in adf table

Iam having independent and dependent select one choice in a ROW in adf af:table
unable to insert more than one row with dependent select one choice using create insert in adf table.
Able to add more rows in UI af:table but ,ignoring previous rows (select one choice values) and only latest current row values is getting inserted to the database.
Following is the code used to create row and for pointing to the current row
public void addRowOnSecSettings(){
SecurityGroupSettingsVOImpl SecGroupSetVO =(SecurityGroupSettingsVOImpl) this.getSecurityGroupSettingsVO1();
try{
int rowCount = SecGroupSetVO.getRowCount();
SecurityGroupSettingsVORowImpl SecGroupSetRow =
(SecurityGroupSettingsVORowImpl)SecGroupSetVO.createRow();
SecGroupSetRow.setNewRowState(Row.STATUS_INITIALIZED);
SecGroupSetVO.insertRowAtRangeIndex(rowCount, SecGroupSetRow);
SecGroupSetVO.setCurrentRowAtRangeIndex(rowCount);
SecGroupSetVO.setCurrentRow(SecGroupSetRow);
} catch (Exception e) {
e.printStackTrace();
Regards,
Bhagavan

as it is dependent select one choice ,have already put auto submit="true".but no chance ,
if i add two rows vo rowiterator showing count 2 but only current row select onechoice values are getting where as previous row select one choice values are null.

Benefit Enrollment Callable Object

Hi Experts,
I am trying to implement Benefits Enrollment through GP process under "My First Days". I have copied the SAP delivered action for benefit enrollment as per note 968360.
The action has Input parameters:
Enrollment Reason: HIREE (Bold E as per note)
Service ID: EMPLOYEE_BENEFITPAY_GENERIC_ENROLLMENT05HIRE (HIRE is the adjustment reason).
I also have a callable object:
Object Definition:
Web Dynpro Application: BenefitsApplication
Package: com.sap.xss.hr.ben
Development Component: com.sap.pcuigp.xssfpm.wd.FPMComponent.
Parameters:
Enrollment Reason: HIREE (Bold E as per note)
Service ID: EMPLOYEE_BENEFITPAY_GENERIC_ENROLLMENT05HIRE (HIRE is the adjustment reason).
For some reason, the above configuration is working on portal. It is throwing an error:
No correct adjustment reason specified
How to get rid of the error. It is very clear that adjustment reason should be passed from GP Design time. But I can not figure out what is missing.

few questions
when you add the service that you have mentioned in the service area for an employee I want you to answer following
1. check the IT 378 entry and reply with how many reasons are configured for current period
2. in portal for the same employee how many services are seen
3. What is the link that you click and you get message "no enrollment reasons found"
I had a similar issue and this was because we enable a wrong service.
The correct service if enabled will show all the reasons configured for current period in infotype 378.

Benefit Enrollment Form Text

Can anyone direct me on how to change the text the Benefit Enrollment form?

Hi Ken,
You would have to copy the standard form HR_BEN_ENRO from 000 client to your customizing client and change description as desired. Iu2019d consult with the relevant resource on this.
Donnie

Benefit - Enrollment to delete a benefit plan

Hi,
The requirement is to delete a benefit plan (e.g. DENT) from enrollment screen (HRBEN0001):
a) Is to delete a benefit plan via "Define Benefit Programs" the best way?
a) Currently, there are employees already enrolled with benefit plan DENT and have payroll run with it. Is there any impact that need to be considered?
Thanks
Nikki
Edited by: Nikki_99 on Aug 5, 2010 2:39 PM

I think the requirement probably is to exclude this plan from showing up in 'HRBEN0001' for specific benefit adjustment reasons.
If this is the case, you can remove this through V_74HB_A (for health plan as it's Dental plan). Note, this only exclude the plan from showing up in benefit enrollment; it doesn't prevent user from actually adding this in IT0168 through PA30.
You really don't want to physically remove an existing benefit plan that's either currently or previously used as this would cause inconsistency.
Rgds.

Dependent Select

Hi
I am trying to get a dependent select where the default
values are from a database. I can get it to create a list of
records in the first drop down which when selected changes the
values in the second drop down. This is then posted to a database
which all works fine.
However, when I view the page again, I need the dropdowns to
show the values posted to the database for that record.
Any help would be gratefully accepted.

"DaveZH" <[email protected]> wrote in
message
news:gneqd0$m8v$[email protected]..
> I am trying to get a dependent select where the default
values are from a
> database. I can get it to create a list of records in
the first drop down
> which when selected changes the values in the second
drop down. This is
> then
> posted to a database which all works fine.
>
> However, when I view the page again, I need the
dropdowns to show the
> values
> posted to the database for that record.
>
> Any help would be gratefully accepted.
I wrote a dedicated widget for that. You can find it here:
http://www.massimocorner.com/libraries/spry/linkedselect/
You can use the "tmt:defaultselected" attribute for that.
Hope it may help
Massimo Foti, web-programmer for hire
Tools for ColdFusion, JavaScript and Dreamweaver:
http://www.massimocorner.com

Loading multiple dependent select lists

What is the best way to load select lists that are dependent on the previous one?
ex.
Select School
based on school you select the subjects
select subject
based on subject you select the courses,
etc
I'm trying to stay away from as much javascript as possible.
thanks for the help!
Michael

You can use javascript, or resubmit the page and laod the dependant select list based on what was selected.

Embarrassing questions.. :/ Dependent Select Lists

One more embarrassing question to feature my narrow knowledge.
I want to create dependent select lists. Have tried following the procedure as in help:
You can have one LOV drive another LOV by: 
<ul>
<li type="disc">
Creating a basic form. 
</li>
<li type="disc">
Defining two lists of values. Note that the driving LOV must submit the page after a value is chosen. 
</li>
<li type="disc">
Defining a branch that branches back to the current page. 
</li>
</ul>
Consider the following example. The first LOV enables the user to pick a state. 
<pre xml:space="preserve">SELECT state_name d, state_id v FROM states </pre>
The second LOV selects the country name and country ID based on the state selected in the first LOV. 
<pre xml:space="preserve">SELECT county_name d, county_id v FROM counties WHERE state_id = :Px_STATE_ID </pre>
I try to follow the procedure and I get nothing in list two.
I am trying to make it this way that if a country selected in 1st list then only regions to that country get listed in 2nd select list.
Can someone "spell" this out for me? With an example? I had previously asked similar question here and never figured out solution out of it, so I am embarrasingly asking once more...
Hrefna the persistent

Hi Earl,
Can you please help me out? Hope so.
I then created a page with a text field called
P1_EMPNO.You're not using select list items on the page? That's what this thread is about - although the specifics can be adapted to other page item types.
I added onblur="get_AJAX_SELECT_XML(this,'P1_ENAME')"
in the Form Element Attributes.
My question is, how do I create P1_ENAME? Is it a
LOV, text, etc.Don't know. What are you trying to accomplish? I thought you wanted one select list item to help you narrow down the number of items in a second select list - but it sounds like you've got something else going on. Please explain exactly what your UI requirements are.
Earl

How to create dependent Select Lists?

Hi,
Found in the documentation that to create dependent select list we have to do these 3 things:
1. In the parent select list, choose the option "select list with submit".
2. Defining a branch that branches back to the current page.
3. In the child select list sql, use the value of the parent (eg. :P6_PARENT_SELECT_VALUE).
When I change the value of parent select list the page is getting submitted and its going to the parent page. I've a branch that goes to the parent page but how to create a branch that comes back to the same page and then use it in parent select list?
Thanks,
Hozy

Hi Hozy,
1. Make the branch conditional...
2. Create a new branch while will run when you make a selection in parent select list.
Also check this site to create dependent select list without sumbitting the page....
http://www.dba-oracle.com/t_html_db_apex_ajax_application_express.htm
Regards,
Shijesh

ESS Benefit Enrollment - No correct adjustment reasons specified

We are in ECC 60. When testing ESS benefit open enrollment (under Content Admin - Portal Content - Content Provided by SAP - End user content - ESS - Iviews - Benefit and Payment - then either test on 'Enrollment' or 'Flex Bens Enrollment)', we keep getting error 'No Correct adjustment reasons specified' .
I already configured 'Benefit Area Admin Paramenter' to have open enrollment period to be active for month of April (for testing), and also assigned proper role in 'URL of PCD Page' for resource key 'EMPLOYEE_GENERICENROLLMENT_SERVICE05', and yet still get the error message. Searching SDN for this issue, I see that some people also had similar issues before, but there doesn't seem to be a concrete / clear solution. Appreciate if someone can shed some light on what I'm still mising .
Thanks.

Hi Ted,
Not sure if this would help.
You can try the below thread..... It also has reference to an OSS Note.
[Adjustment Reason;
Good Luck !!!
Kumarpal Jain.

Steps to configure benefit enrollment ess?

Hi experts,
I am a student and i am new in sap hcm employee self service.
May i know if any expert has any steps to configure and link benefit in sap to sap enterprise portal using ess?
For examples, i do not know how it link to sap enterprise portal using ?
Thanks.
Cheers,
xy

Dear,
First of all please make sure your adjustment reason has been configured correctly in the IMG, specificcaly the following node
Administration ->Flexible administration -> Define Administrative
parameters.
As well as IMG->Personal Management->Employee Self Service->Service Specific
Settings->Benefits and Payments->Benefits->Set Up ESS Parameters. Please make sure that the validity dates are correct. and finally
Benefits -> Flexible Administration ->Define Adjustment permissions
If your configuration is correct please have a look at the following
1. Please maintain a value for "URL of PCD Page" in the resource table V_T7XSSSERRES for key EMPOYEE_GENERICENROLLMENT_SERVICE05.
2. Another reason for the page not being displayed could be due to authorizations. See that the user has authorization to view this page.
Best Regards,
Deepak..

Benefit Enrollment (HRBEN0001) Showing Annual instead of PayPeriod Costs

HCM: In the Benefits Enrollment screen, when selecting a particular benefit plan, the Employee and Employer costs for that plan are supposed to display the cost amount defined in the cost rule for that plan and adjusted to the employee's pay period. For most of our plans, this is indeed what is happening. However, for our salaried US employees, it is displaying the annual cost of the plans instead of the pay period cost. This does not occur for our hourly-paid US employees nor does it occur for our salaried or hourly-paid Canadian employees. If we go into PA30 to adjust the benefit plan, we can change the period from annual to bi-weekly and save it but when we return to that plan, it has again reverted to annual. It occurs only for Insurance plans and not for Health, Savings, or any other plans. As well, it does not occur for all the Insurance plans but only for some of them. (We are running ECC 6 with support pack 18.) Any ideas/suggestions on how to correct this?
Edited by: Ken Rodych on Sep 8, 2010 9:55 PM

The problem appears to be the deduction model (thanks Sarah). I have to do more testing to confirm this and will let you know whether it resolves it. (I will also award the'Forum Points' at that time, depending on the results of my testing.)
Edited by: Ken Rodych on Sep 9, 2010 4:34 PM

ESS BP-50.4 Benefit Enrollment - Dependant Selections

Similar Messages

Maybe you are looking for