Steps to configure benefit enrollment ess?

Hi experts,
I am a student and i am new in sap hcm employee self service.
May i know if any expert has any steps to configure and link benefit in sap to sap enterprise portal using ess?
For examples, i do not know how it link to sap enterprise portal using ?
Thanks.
Cheers,
xy

Dear,
First of all please make sure your adjustment reason has been configured correctly in the IMG, specificcaly the following node
Administration ->Flexible administration -> Define Administrative
parameters.
As well as IMG->Personal Management->Employee Self Service->Service Specific
Settings->Benefits and Payments->Benefits->Set Up ESS Parameters. Please make sure that the validity dates are correct. and finally
Benefits -> Flexible Administration ->Define Adjustment permissions
If your configuration is correct please have a look at the following
1. Please maintain a value for "URL of PCD Page" in the resource table V_T7XSSSERRES for key EMPOYEE_GENERICENROLLMENT_SERVICE05.
2. Another reason for the page not being displayed could be due to authorizations. See that the user has authorization to view this page.
Best Regards,
Deepak..

Similar Messages

ESS Benefit Enrollment - No correct adjustment reasons specified

We are in ECC 60. When testing ESS benefit open enrollment (under Content Admin - Portal Content - Content Provided by SAP - End user content - ESS - Iviews - Benefit and Payment - then either test on 'Enrollment' or 'Flex Bens Enrollment)', we keep getting error 'No Correct adjustment reasons specified' .
I already configured 'Benefit Area Admin Paramenter' to have open enrollment period to be active for month of April (for testing), and also assigned proper role in 'URL of PCD Page' for resource key 'EMPLOYEE_GENERICENROLLMENT_SERVICE05', and yet still get the error message. Searching SDN for this issue, I see that some people also had similar issues before, but there doesn't seem to be a concrete / clear solution. Appreciate if someone can shed some light on what I'm still mising .
Thanks.

Hi Ted,
Not sure if this would help.
You can try the below thread..... It also has reference to an OSS Note.
[Adjustment Reason;
Good Luck !!!
Kumarpal Jain.

ESS BP-50.4 Benefit Enrollment - Dependant Selections

Hi - I have installed the ESS BP 50.4 and for benefit enrollment all of the screens that all you to select eligible dependants - the check box shows at the top of the screen when the dependant name shows in a table at the bottom of the screen....how/where do I correct this?
Thanks - Janet

Did you ever resolve this issue? I am experiencing the same issue.

ESS Benefit Enrollment Critical Error

We are getting a Crtical Error when we try to save ESS Benefit Enrollment in ESS Portal
The error says:
Field Symbol has not yet been assigned, error key: RFC_ERROR_SYSTEM_FAILURE.
Please advice

Amr,
It could possibly be related to your patch level. Check this [thread|"Field symbol has not yet been assigned" Error on Family data iview; out.
Good Luck!
Sandeep Tudumu

Steps to configure R/3 system to Portal implementation

Hi
Please provide steps to configure R/3 system to Portal implementation
when i m opening standard iview in ESS in portal i m getting following runtime error.
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to resolve JCO destination name 'SAP_R3_SelfServiceGenerics_MetaData' in the SLD. No such JCO destination is defined in the SLD.
Please help
Thanks

Hello Bhupinder Singh,
To use ESS/MSS services in Portal follow the following Steps
Maintaining jCo Connections
Use
jCo connections are used in iViews to connect directly to a backend. They are delivered with the portal content and must be activated (configured to access a specific system).
jCo connections have two parts: one with <jCo name>, and the other with suffix <jCo Name>_MetaData. The first one transfers user-specific data within the scenario; the other transfers only the needed metadata. For the jCo with name <jCo name>, SAP Logon Ticket is recommended as an authentication method. For the metadata connection, a user ID and password is needed. A system user created before is sufficient.
Procedure
Within this guide we generically describe the step-by-step procedure for an example connection set. Perform all steps for the following jCos:
u2022     SAP_R3_Financials / SAP_R3_Financials_Metadata
u2022     SAP_R3_HumanResources / SAP_R3_HumanResources_MetaData
u2022     SAP_R3_SelfServiceGenerics / SAP_R3_SelfServiceGenerics_MetaData
u2022     SAP_R3_Travel / SAP_R3_Travel_MetaData
u2022     SAP_R3_SelfServiceGenerics_MetaDataFIN
1.     Open the Web Dynpro Tool Applications overview page of your SAP NetWeaver Application Server Java: (http://<host>.<domain>:<port>/webdynpro/welcome)
2.     Select the Content Administrator link (or use a direct link, such as http://<host>.<domain>:<port>/webdynpro/dispatcher/sap.com/tcwdtools/Explorer) and logon with j2ee administrator rights
3.     Choose the Maintain JCo Destinations button.
4.     The available jCos are displayed with a red light, indicating that they are not yet maintained.
5.     In the JCo Destination Details iView, choose the Create button for the jCo you want to create.
6.     In Guided Procedure Section 1: General Data, make the following entries:
Field name     User action and values     Note
Name     <jCo_Name> or <jCo_name>_Metadata     Do not change the client number (for example, 100)
Maximal Pool Size     <keep default value>
Maximum connections     <keep default value>
Connection Timeout (msec.)     <keep default value>
Maximum Waiting Time (msec.)     <keep default value>
7.     Choose Next.
8.     In J2EE Cluster, make the following entries:
Field name     User action and values     Note
Use Local J2EE engine <SID> on <host>     Selected     Keep default values
9.     Choose Next.
10.     In Connection Type u2013 Data Type, make the following entries:
Field name     User action and values     Note
Data Type     Dictionary Meta Data     Dictionary Meta Data selected for <jCo_name>_MetaData; Application Data selected for <jCo_name> maintenance
Destination Type     Load-balanced Connection (recommended)     For Dictionary Meta Data Connection, the value cannot be changed
11.     Choose Next.
12.     In Msg. Server Connection, make the following entries:
Field name     User action and values     Note
Message Server     <select message server for your SAP ERP HR system>     The values are taken from the technical system list of the SLD
Logon Group     <select logon group for your SAP ERP HR system>     The values are taken from the technical system list of the SLD
13.     Choose Next.
14.     In Security u2013 User Authentication, make the following entries:
Field name     User action and values     Note
Used Method     <if using <jCo_name>, select Ticket>
<if using <jCo_name>_Metadata, value cannot be changed>
Name     <enter connection user name>     For example, rfcsysuser
Password/Confirm Password     <enter a password>
Language     English
SNC Mode     Off     For more information on SNC Mode, see the SAP NetWeaver 7.0 Help.
15.     Choose Next.
16.     In the Summary step, verify your settings, then choose Finish. The system displays a positive status message.
17.     In the JCo Destination Details iView, choose the Test link. The system displays a positive status message.
If the test fails, try to ping the ABAP system using the URL link. Check your settings, especially SLD, and certificate upload.
Let me know weather your problem solved or not.
Please reward points if helpful
Please close the thread if problem solved
Thankyou,
Regards
Vijai

I am getting "The contents cannot be displayed in a frame" error when tried to acces an external URL configured through launchpad(ESS). How to rectify it?

Hi Guys,
We have configured ESS role through launchpad. For viewing payslips we are using an external URL configured through launchpad.
But when we try to access the configured link in ESS role, it displays "The contents cannot be displayed in a frame" .
Should I need to change some parameters/settings in Launchpad so that I could overcome this issue.
Guidance required,
Regards,
Ajeeth Kumar S

Hi Shankar Reddy Chamala,
Thanks for the alternate solution.
But the solution you have provided also ended up with the same error
"The content cannot be displayed in a frame" error.
Some additional information so that you could help me out,
The following is the test report .
HTTP/1.1 200 OK
Server: TIN-AppServer
Strict-Transport-Security: max-age=15552000
Cache-Control: no-cache, no-store, must-revalidate
Pragma: no-cache
Expires: Thu, 01 Jan 1970 00:00:00 GMT
x-frame-options: DENY
Content-Type: text/html; charset=UTF-8
Content-Encoding: gzip
Content-Length: 2421
Date: Thu, 15 May 2014 14:23:14 GMT
Connection: keep-alive
Vary: Accept-Encoding
The tester has mentioned the yellow highlighted property may be a cause for this issue.
I googled that the highlighted property is set by the website owners for security reasons.
Shankar I have another doubt..
Is it feasible to create an HTML document to open the external link and link the HTML document to the iview and then configure the custom iview with launchpad.?
-->If yes can you please elaborate the steps for it.
Thanks and Regards,
Ajeeth Kumar S

Benefit Enrollment Callable Object

Hi Experts,
I am trying to implement Benefits Enrollment through GP process under "My First Days". I have copied the SAP delivered action for benefit enrollment as per note 968360.
The action has Input parameters:
Enrollment Reason: HIREE (Bold E as per note)
Service ID: EMPLOYEE_BENEFITPAY_GENERIC_ENROLLMENT05HIRE (HIRE is the adjustment reason).
I also have a callable object:
Object Definition:
Web Dynpro Application: BenefitsApplication
Package: com.sap.xss.hr.ben
Development Component: com.sap.pcuigp.xssfpm.wd.FPMComponent.
Parameters:
Enrollment Reason: HIREE (Bold E as per note)
Service ID: EMPLOYEE_BENEFITPAY_GENERIC_ENROLLMENT05HIRE (HIRE is the adjustment reason).
For some reason, the above configuration is working on portal. It is throwing an error:
No correct adjustment reason specified
How to get rid of the error. It is very clear that adjustment reason should be passed from GP Design time. But I can not figure out what is missing.

few questions
when you add the service that you have mentioned in the service area for an employee I want you to answer following
1. check the IT 378 entry and reply with how many reasons are configured for current period
2. in portal for the same employee how many services are seen
3. What is the link that you click and you get message "no enrollment reasons found"
I had a similar issue and this was because we enable a wrong service.
The correct service if enabled will show all the reasons configured for current period in infotype 378.

Benefit enrollment confirmation form

Hello Expert,
Would you please tell how to check which benefit enrollment confirmation form is called from the ESS side. We see the differences in the result when called from SAP and when called from ESS.
Also could the ESS transaction be called from SAP side. If so how and whats the transaction.
Thank you very much.
saplover

Hi.
How solve this issue=
Kind regards

Configuring UWL for ESS

Hi All,
How to configure UWL for ESS & MSS Business Package in Portal
Thanks & Regards
Kirubakaran D.

The configuration of the UWL isn't so much for ESS and/or MSS as it is for just your portal users in general. The configuration of the UWL is actually done in the portal itself under the System Administration role. I suggest starting there and reading all the information. Also, the help.sap.com documentation on the UWL generally will step you through it all. Even in the MSS help documentation, there is a basic section on setting up "bare bones" UWL config. Have a go at that first.

Step by step on how to enroll in a certification test

Hello, With the Cloud for Customer certification coming soon, I'm looking for a step by step on how to enroll in a certification test. Is there a blog published here with that information? I'd like to link to it if possible, but I couldn't find it.
Thanks
ginger

Suggest that you start by configuring hte AirPort Express to "join" the wireless network that is being provided by the Netgear router.
In order to do this, you must provide the AirPort Express with the exact information that it needs to be able to join the network. This includes:
Name of the wireless network
Exact type of wireless security that the router is using
Password for the wireless network
I'm sure that you know the name of the wireless network and the password, but do you know the exact type of wireless security setting that the Netgear router is using? You may need to get into the configuration pages for this information.
Hopefully, it will be WPA2 Personal, or WPA/WPA2 Personal, which the AirPort Express can match. If you see something like WPA-PSK-TKIP or WPA-PSK-AES, then things get more complicated, likely requiring some trail and error.
Once you have the wireless security settings in hand, you are ready to follow Apple's step by step setup for the AirPort Express using the AirPort Utility application on your Mac.
When you have the Express configured, you will already know how to setup the TC, since it will be configured exactly the same way with the same information.
This assumes that you want the TC to connect using wireless only.
It would be much easier to setup the TC to connect to the Netgear router using an Ethernet cable. You will be able to backup to the TC using the Netgear wireless network. Can you consider that option?

Steps to configure Information Rights Management in SharePoint 2013 On-Premise

Hi,
What are the steps to configure Information Rights Managment [IRM] on SharePoint 2013 On-Premise.
Regards,

2. PHases
1. you will have to configure a IRM server
2. You will have to integrate IRM iwth sp server.
Below article should explain all
http://msmvps.com/blogs/ivansanders/archive/2012/06/08/check-out-the-weather-forecast-for-teched-2012.aspx

Steps to configure Planning Overview iView in MSS.

Need help with steps to configure/implement Planning Overview iView in MSS. I have done necessary configs in Define Attributes for planning overview in Customizing for ECM in R/3.
I have worked in ECM ECC 6.0 with employee based approval processes and now working on enh package4.
Thanks
Prav

Hi Vivek,
Thanks for taking time and answering. So, how do I integrate the Org Chart iVIew with these Position Profile and Organizational Unit Profiles pages? We do not need all the iViews that come with these pages. We only need the following
Position Profile
- Employee Group/Subgroup
- Holders
-Organizational Unit Profiles
-Organizational Unit Search
-Position Holders
Thanks
Preet

Steps to configure Toplink 11g(11.1.1.0.1) on OC4J 10.

Please inform detailed steps to configure Toplink 11g(11.1.1.0.1) on OC4J 10.1.3.4

Prashant,
     Hi, Also, Try one of the following 2 configuration options for eclipselink.jar on OC4J
http://wiki.eclipse.org/EclipseLink/Examples/JPA/OC4J_Web_Tutorial#Option_1:_Add_an_eclipselink_shared-library_to_OC4J_-_recommended
http://wiki.eclipse.org/EclipseLink/Examples/JPA/OC4J_Web_Tutorial#Option_2:_Add_a_versioned_new_EclipseLink_shared-library_module_-similarto_option_1
     The applib option is not recommended without some javax and jdbc reconfiguration and associated classloader positioning.
http://wiki.eclipse.org/EclipseLink/Examples/JPA/OC4J_Web_Tutorial#Option_3:_eclipselink.jar_in_applib_-notrecommended
     You may refer to the following post for more details.
Re: How to verify OC4J uses Oracle Toplink 10.x and not Toplink Essentials
     thank you
     /michael
http://www.eclipselink.org

Steps to Configure Speed Dial

Hello,
Need steps to configure speed dial.
Thanks
Abhishek

Hello,
Go to the phone / UDP configuration page and check the Phone Button Template and check whether you have enough lines available to configure as speed dials. If not create a new Phone button template with sufficient speed dial lines and assosiate the newlt created Phone Button Template to your phone / UDP configuration page. Clikc the link Add/Update Speed Dials on the same page and update the speed dial with the requested entries with the Label asthe Speed dial Label and the Number as the number where the speed dial shld reach.
The UDP profiles has to log out and login back for the changes to take effect.
Hope this helps..
Please let me know whether this was infromative or not.
Thanks

Steps to configure XML Gateway in Oracle

Steps to configure XML Gateway in Oracle

Hello,
This is not relevant to Integration - B2B as you might want to post this query in Ebusiness suite forum.
Rgds,Ramesh

Steps to configure benefit enrollment ess?

Similar Messages

Maybe you are looking for