ESS/MSS sso configure between java and abap instance

Dear Gurus,
I want to configure sso between java and abap instance for ESS/MSS. I couldnt find any guide for it, could you please help me gurus ?
Other question is, is there any specific role for ESS/MSS users in JAVA instance. I want to create users and assign this role to them.
Best Regards

Hi Kemal,
Hope you are doing good.
There should be a / in the ITS path before SAP.
Basically the entry that you have mentioned here should be accessible via browser as well. For eg in your case:
http://<its hist name>/sap/bc/gui/sap/its/webgui should be accessible over browser.
I also think you have put in a extra space in "w ebgui". It should be "webgui".
If the connector settings are working, then we can be sure that system connection is fine. You do not need to configure ITS settings.
Also for SSO, refer the SAP note:1083421 and configure the SS0 settings again.
Please run the SSO2 wizard and then make the automatic connection to
the abap server. This will solve any inconsistencies on the server
due to manual interventions.
Most likely reason for the error is that certificates were loaded
manually rather than using SSO wizard.
More help:
<http://wiki.sdn.sap.com/wiki/display/EP/Troubleshooting+SSO+between+AS-ABAP+and+AS-JAVA>
The SSO enabling parameters should be set on the R/3 server.
SSO Logon Ticket-> login/accept_sso2_ticket and login/create_sso2_ticket
More info:
<http://help.sap.com/saphelp_nw04/Helpdata/EN/22/41c43ac23cef2fe10000000a114084/frameset.htm>
Thank you and have a nice day :).
Kind Regards,
Hemanth
SAP AGS

Similar Messages

Error while creating connection between Java and ABAP

Experts
I am getting the following error message when I am trying to test the connection between JAVA and ABAP systems.
1. The system ID is valid
2. The system was retrieved.
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (s09f71v06.svr.bankone.net:8100)
5. The host name s09f71v06.svr.bankone.net was resolved successfully.
6. The server s09f71v06.svr.bankone.net *could not be pinged* successfully.
I have JAVA and ABAP on the same system. I am trying to establish a connection. I have checked all the settings and they looks fine. I have also pinged from other system to this server and the Ping works fine.
Please do let m eknow where do I need to check for the errros or logs for the above error message.
Appreciate your quick help.
Mahesh

Check the relevant services are test are active on the Backend system through SICF trransaction.
Also make sure that default icm services are running.See note 517484.
More important the connector test in the portal system should work properly,recheck the WAS path etc are correct.
Regards
Ajay

Communicate link between Java and ABAP Stack for https

I have configured https in both the java and abap stacks (we have a double stack configuration). Due to our future configuration I have changed the hostnames to fully qualified hostnames per SAP instructions.
The question I have is does anyone know what RFC destinations or JCo settings I need to change to make https complete?
I have the problem where when I fire off the Integration Builder from within the ABAP stack (SXMB_IFR) I get a straight hostname (no domain name). Where is this configured? Any help is appreciated..

Check the exchange profile (Administratio tab in /rep/start/index.jsp page; you will have to enter it manually since it is throwing error from SXMB_IFR).
Regards,
Henrique.

JCo connection between java and ABAP

Hi,
Any pointers for some good material on establishing JCo connection between ABAP and Java to execute ABAP FMs.
Thanks and Regards
Arpita Saxena

Please find following link for your reference.
[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/85a483cb-0d01-0010-2990-c5168f01ce8a?quicklink=index&overridelayout=true]

SAProuter for Jco between Java and ABAP stack

When configuring Jco at Java only, there is an option to use SAProuter.
This is not for SMP download or OSS support.
So is there any document for this kind of SAProuter usage?
Thanks!

I don't quite understand why you need SAProuter between 2 SAP instances, which means they locate in 2 different network segments and cannot communicate each other directly. But let's assume this scenario:
1. ECC in network A, IP 10.10.10.1;
2. Portal in network B, IP 192.168.1.1;
3. SAProuter has 2 adapters, IP 10.10.10.2 and 192.168.1.2.
Make sure all message server and dispatch info are maintained correctly in service file (or corresponding file on other platform) on all 3 hosts, and then when you configure Portal Jco connection routestring you need is /H/<SAProuter IP>/S/3299 to enable them communicate each other. Usually this is for security purpose of potential network attack to SAP hosts from user IP, for instance:
4. All public users in network C, IP 172...*, then you need a SAProuter which has 3 adapters.
Regards,
Effan

ESS/MSS in ECC 6.0 are Abap or Java WebDynpro ?

Hi ,
We are on ECC5.0 and have ESS/MSS on Java WebDynpro . For ECC6.0 are ESS/MSS in ECC 6.0 are Abap or Java WebDynpro compoment ?
Any watch out when updrading from ECC5.0 to ECC6.0 ?
Thank you .

in ECC 6.0, ESS/MSS are WebDynpro Java calling ABAP backend function modules. However, be careful, there is a switch that enables SOME ESS services as ABAP WebDynpro (Especially in the Travel management area). Unless you use that switch all services are WebDynpro Java.
when upgrading from ECC5.0 to ECC 6.0 you need to test again all ESS/MSS services. In ECC5.0, services are written as Portal iViews, so customizations you made to ESS in ECC5.0 may be lost.
let me know if you still have questions.
Tiberiu

Users mapping between EP and ABAP system

Hello
I'd like to ask for some guidance in my quest
Current situation looks like this:
I've configured UME in AS Java to work with LDAP as read only data source. Then I've configured SPNego to run SSO - It works, users from MS AD can log into portal.
Now I have application in WD which authorizes via EP/AD - works fine.
And next step is users mapping between AD and ABAP backend (serving some BAPI's for WD app)
I've found a bunch of help pages starting from
http://help.sap.com/saphelp_nwce711/helpdata/en/0b/d82c4142aef623e10000000a155106/frameset.htm
But somehow it's quite complicated to achieve this mapping. I've tried to set RFC destinations logon type to user mapping but without succes.
Can anyone point me to some more clear example or give path to configure this scenario? Is there a way of configuring this with NWA or some XML file editing is required?
Any help will be appreciated.
BTW: whole environment is in version 7.11
Best regards
Maciej

There is no equivalent to SPNEGO on the ABAP side.
If your goal is to propagate the user, then possible options are:
-> Wait for SAML 2.0 or invest now in a SAML 1.0 provider.
-> Use the same kerberos ticket for the EP as what your ABAP system will accept: route = SNC and 3rd party libraries.
-> Issue SAP logon tickets for the ABAP system from the EP, and use these in your WDA.
Another option is to expose the service with saved logon data in the ICF. If the service is just a wrapper for the BAPI, then you can also consider using trusted RFC between the service and the backend, but this might not be acceptable for your service.
I have only done experimental stuff with this and some of the above is not released yet. Also consider the consequences, even if it "does work"...
Cheers,
Julius

Netweaver Data base instances for Java and ABAP

Hello Experts,
Please help me to understand how the two technology stacks of SAP WAS (Java and ABAP) are configured to use underline data base in Netweaver.
Is it manadatory to have two separate data base schemas, one for ABAP applications and other for Java applications in the Netweaver?
If yes..the any idea about what are those schema differences??
- Rajan

Hello Krishna,
Thanks for the reply.
Is there any way I can access these shemas? Are they the same by structure or there are major differences?
My requirement is to build a common schema out of these two and have the data from these two schemas to be consolidated in the new schema.
Any help will be greatly appreciated.
- Rajan

Could you send me the ESS MSS Business Packag installation guide and confi

Could you send me the ESS MSS Business Packag installation guide and configuration steps . I wanted to learn ESS and MSS configuration steps
Regards
Jagan

Answer in Short = Yes I can.
Bu the study material is voluminous and cannot be attached so SAP has created a website with all the material in it here is the address: http://help.sap.com
You should find the site very very informative. Good Luck.
cheers

Java and abap stack connection

Hello,
how to check connection b/w Java and ABAP stack.
I am getting below error :
SAP:Code area="MAPPING">JCO_SYSTEM_FAILURE</SAP:Code>
<SAP:P1>connection to partner 'localhost:0' broken / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 t</SAP:P1>
We did some upgrades of kernel and jvm and started getting this error.
Please suggest

Hi,
Check this threads
JCO_SYSTEM_FAILURE
JCO_SYSTEM_FAILURE
JCO_SYSTEM_FAILURE . Pls help
Regards
Ramesh

CRC failed in Java and ABAP Trial Version on Linux - VMware Edition part02

I download SAP NetWeaver 70 - Java and ABAP VMware Trial and I couldn't install it because part02 rar file has reported a checksum error.
- SAP NetWeaver 70 - Java and ABAP VMware Trial.part02.rar: CRC failed in SLES10SP1_Test_Drive(2)-s003.vmdk. The file is corrupt
Also, I think file SLES10SP1_Test_Drive.vmdk is missing from the archive files.
Could you please, confirm that the archives in the sdn downloads are correct!

I also have the same problem, CRC error:
X:SAPSAP NetWeaver 70 - Java and ABAP VMware Trial.part02.rar: CRC hiba a SLES10SP1_Test_Drive(2)-s003.vmdk-ban. A fájl sérült

Why can't I use WebCT chat with my computer? I get the 'spiral of death' every time I try to type in my chat. I have a feeling it has to do with compatibility issues between Java and Tiger.

Why can't I use WebCT chat with my computer? I get the 'spiral of death' every time I try to type in my chat. I have a feeling it has to do with compatibility issues between Java and Tiger.

Hi Elizabeth,
Do your Mac meet any of these requirements?
http://www.wvnet.edu/services/webct/requirements.html
From this it appears to be PC only!???
http://sourceforge.net/projects/awebctcclient/files/Pancake%20%28it%20own%20proj ect%20now%29/Pancake%20Console%20V1.0.0/PancakeConsole-1.0.0-src.zip/download
Can you provide any more info on which bersion or file you have?
Can you tell us why you need this for your use?

Corrupt ? : Java and ABAP Trial Version on Linux - VMware Edition

Has anyone been successfull in downloading / running the brand new testdrive "Netweaver 7.0 - Java and ABAP Trial Version on Linux - VMware Edition" ?
I tried downloading it twice, but it appears the second file (part2.rar) is corrupt.
unpacking gives a CRC error on file 'SLES10SP1_Test_Drive(2)-s003.vmdk.
Thanks & Best regards,
Jeroen Engelen
SAP Netweaver Technology consultant

Hello all,
You have to follow instruction on this side>
http://www.novell.com/documentation/sles10/esd/ii_sap_testdrive_sles10sp1_vmware1.html
YOu need to download
part1 > which is soft from NOvell called
SAP Test Drive "SLES10SP1VSAP.rar"
Maybe this link help you "http://download.novell.com/index.jsp?product_id=&search=Search&families=2658&version=8161&date_range=&keywords=&sort_by=&x=14&y=7
After donwload from sdn part two
SAP NetWeaver 7.0 - Java and ABAP Trial Version on Linux - VMware Edition
from sdn Downloads.
YOu need to use VMWARE soft to start up SLES 10 (part1) and after that use SLES to start up SAP.
But here I have problem I can not login to SLES as I don't know passwrod, I was trying to found it at novell web site or SAP without any sucess.
So at this point I am stuck
Here is the same qeustion from Jim Jiang and me
what is user name and password for SLES10 SP1 SAP Version
Hope this give you overview what needs to be done, to start up Trial SAP version
Peter Nechala

SMSY for ERP JAVA and ABAP Stack

Hi Folks - I have installed SAP ERP 6.0 EHP5 in one database called T12. Now there is a need for a Java stack and I have installed the Java stack in another database called J12.
I was able to define the ABAP stack on system landscape and MOPZ is working fine. However, I am not sure how I should go about the Java (J12) instance definidstion on SMSY.
I am using Somlam 7.1 on Oracle Linux system.
ABAP stack is on ERL 6.0 EHP5 and Java stack is Netweaver 7.0 EHP2.
J12 and T12 systems are connected via JCO.
SLD has been defined for both stacks and they are using the local SLD for the SolMan.
Your help is much appriciated.

Sunny - I checked the SLD and It is working fine. There were couple of issues that I fixed. Since I defined the Java system manually I delete it. Hopefully SLD will populate the definition.
In same note, Would it be possible that installing ERP java and ABAP stack on different hosts (stand alone) is causing this issue, especially they are using different Sid's?
I was reading SAP Note 1344564, It states
III.Some Main Instances include other Main Instances (E.g., in SAP
ERP 6.0, Main Instance SAP NW - Enterprise Portal includes SAP NW -
EP Core.). If the including Main Instance is installed, it's not
necessary to mark the included Main Instance(s) for relevance.
Is this mean in SMSY I do not have to define any product for the Java engine? When installing the Java, I had to create the product manually to be able to generate the installation key.
Your input is appreciated.
Edited by: kourosh Ghouchkhani on Nov 22, 2011 1:20 AM

JAVA and ABAP stack support pakages

Hi,
I am new on installation of solution manager server.
I just install solution manager server EHP1 on windows 2003. Now I want to patch my server.
I have abap and java stack on my server. Can I use jspm to upload my new patches for both Java and ABAP stack or I should use SPAM for abap stack and jspm for java.
Thanks Reza

Hello Reza,
Just to clarify, Best practise is to update your kernel to the latest before you start patching in your system.
So download SAPEXE.SAR (Database independent kernel package), SAPEXEDB (Database dependent kernel package) and IGSEXE.SAR (IGS Package) from the SMP. kernel is dependent on your operating system and database and therefore make sure you download the right package otherwise you'll end up in messing up the system.
follow SAPnote # 19466 for help.
Once you are done with the kernel update then patch you Abap stack by SPAM and JAva stack by JSPM.
I hope that makes things clear.
Best Regards
NIraj

ESS/MSS sso configure between java and abap instance

Similar Messages

Maybe you are looking for