ESS WebDynpro Appilication with Repetitive structure

I am trying to develop an ESS Webdynpro application for Infotype P0585 (Section 80) P0591 (Nominee Details), both these infotypes have repetitive structure.
There is no screen structure or RFC's(For Read, Modify, Edit Operations) for these Infotypes.
We are using ECC 5.0 (Software Component: EA-HR(SAP R/3 Enterprise HR Extension) Support Package Level : 09 )
I understand that customising for repeat Structure can be done by making an entry in the tables T588AUTO_MAP, T588AUTO_TABLE     (Mapping for Conversion of Repeat Structure/Tables), but both these tables do not permit entry.
Any guidelines in developing Webdynpro application for services that use infotypes that have repetitive structure and implementing conversion class for the above infotype.

Hi Sarath ,
I am also working on Infotypes P0585/6 .
There are some modifications to be done in the Output Table Conversion Method inside the CL_HRPA_UI_CONVERT class for IT0585/6. The screen structure's was not getting copied properly and the Object Key of the Line-Records were lost inside this method somewhere. These changes are been rectified now and will be working by the end of the week.
As for the Entry in the T588AUTO_TABLE , it has been done  for P0585/6 .
Regards
Aditya Todi

Similar Messages

  • Repetitive Structure in Webdynpro

    Hi All,
    I am developing a Webdynpro for Java application for Investment Declaration which has repetitive structure,
    How can I use floor plan manager to develop this application, Is there any standard webdynpro application having repetitive structure in ESS.
    Regards
    Sarath

    Hi Nitin,
    Repetitive Structure are used FREQUENTLYi n HR .
    These are
    infotype 0005
                0008
                0025
                0027
    Hope it will help u...........!!!

  • ERROR In ESS WebDynpro with ERP2004  IDES System

    Hi,
    I have installed ERP2004 ECC 5.0 IDES version now i want to use ESS Application on Portal
    i Deployed the JAVA Components for ESS on the WAS 6.40 J2EE Server the componets are succesfully deployed.
    i also cofigure the SLD and JCO destination for ESS which is according to SAP Help.
    now my problem was when i test any of the ESS Webdynpro application using
    http://<host>:<Port>/webdynpro/welcome
    and login into webdynpro content administrator and expanding sap.com
    while running any of the ESS application from deployed content it's gives following common error for all application, no application is works
    error:---
    An error has occurred:
    "Failed to process the request."
    Please contact your system administrator.
    Web Dynpro runtime:
    Vendor: SAP, Build ID: 6.4009.00.0000.20041104173322.0000 (release=630_REL, buildtime=2004-11-18:22:17:10[UTC], changelist=298578, host=PWDFM027)
    Web Dynpro code generators of DC sap.com/essaraddr:
    SapDictionaryGenerationCore: 6.4009.00.0000.20040910101802.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:24:41[UTC], changelist=280522, <b>host=PWDFM026.wdf.sap.corp</b>)
    SapMetamodelWebDynpro: 6.4009.00.0000.20040910102423.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:28:58[UTC], changelist=280539, <b>host=PWDFM026.wdf.sap.corp</b>)
    SapMetamodelCore: 6.4009.00.0000.20040730142052.0000 (release=630_VAL_REL, buildtime=2004-09-29:21:18:03[UTC],
    Error stacktrace:
    com.sap.tc.webdynpro.services.exceptions.WDTypeNotFoundException: type com.sap.pcuigp.xssfpm.wd.model.types.Ext_Service could not be loaded: com.sap.dictionary.runtime.DdException:
         at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker.getSimpleType(DataTypeBroker.java:242)
         at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker.getDataType(DataTypeBroker.java:205)
         at com.sap.tc.webdynpro.progmodel.context.AttributeInfo.init(AttributeInfo.java:471)
         at com.sap.tc.webdynpro.progmodel.context.NodeInfo.initAttributes(NodeInfo.java:771)
         at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:756)
    Caused by: com.sap.dictionary.runtime.DdException:
         at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker$1.fillSldConnection(DataTypeBroker.java:89)
         at com.sap.dictionary.runtime.ProviderFactory.internalResolveLogicalNameToJCODestination(ProviderFactory.java:408)
         at com.sap.dictionary.runtime.ProviderFactory.resolveLogicalNameToJCODestination(ProviderFactory.java:354)
         at com.sap.dictionary.runtime.ProviderFactory.internalGetProvider
    look at the webdynpro application host type it's shows
    PWDFM026.wdf.sap.corp
    i think this host  are taken from R3 Side since the ERP2004 is IDES version, but my host was different
    if there is problem with host how can i changed this host setting
    if enything else i mising than plese help me to solve this
    regards,
    kaushal

    Hi,
    Go to technical landscapes and create a technical landscape for your ECC backend system.
    This should solve the problem.
    Regards
    Bharathwaj.

  • XML import for repetition, is repitition with this structure possible

    If it is possible, what does the XML and or template structure have to look like, in order to support repeating sections of
    1. Chapter name (as a text)
    2. Table
    1. Chapter name
    2. Table
    1. Chapter name
    2. Table
    and so on...
    Everything should be inside a text frame, in order to let the paragraph style of "Chapter name" always begin a new page. The text container is mapped to the xml element called "grp" in the example below.
    I've imported in numerous ways with varying degrees of correctness, so if there is anyone that knows what I mean and how to tackle the problem, I would be very glad. I can work around the XML and the document in almost any way...
    I only get it to work if there are sufficient number of chapternames and tables put out on the body page from start. I would like InDesign to create copies of the "template"...
    But having just one "template" out on the body page, I get a result like this in the structure (and just the first one is mapped to the body page template, as you can see – the rest of them being empty unmapped XML brackets):
    Thanks,
    Andreas

    I made a layout on the first body page, and then I imported into that.
    Err, you mean a text frame, not a layout, right? OK, I haven't played with it that way, I'll take a look at it tomorrow (might be a while) -- if no one else ha solved it first.
    (The tables are not visible in the structure, howcome?)
    I believe that once a table is converted from an XML table into an InDesign table, it is no longer visible as a distinct XML object, just like two letters in a word are not visible in the structure. (I could be wrong on this).
    Yes, I used CALS tables. Why? Because it was the default. I made a layout like you described and exported it to XML, cleaned up the XML,
    and reimported it for my test. CALS was the default checkbox, so I went with it. I don't think it has naything to do with the structure question.
    I didn't use cals tables in my own XML file, but ordinary ones, mapped by column.
    Aren't those more annoying to use?
    Anyhow:
    ... but the repetition doing it my way does not work – as it does in your sample (and for me too, trying it), dragging the structure out onto the page.
    So, is dragging it a good solution for you? Is your problem solved? Or does that not meet your needs?

  • Ess webdynpro java iview personalization problem

    Hi,
    we have a problem with the personalization dialog of the ESS-WebDynpro JAVA Applications (f.e. CATS, WhoISWho, Adress...) which the end user gets with Ctrl-Right mouseclick.
    Our portal and HCM Backend use language "DE" (Germany). The personalization dialog ist shown always in english. Is ist possible to change the language of the personalization dialog ?
    Regards

    HI,
    If you set the language as DE for the User performing the Personalisation and if you get all the portal standard menu in DE,  then it should show the personalisation  Dialog in DE.
    I had the same issue for Korean Language and i Did the personalisation successfully (text chage for Korean)
    so i think it should work for you case also.
    Regards
    Rajendra

  • Multiple Data entry profiles in ESS -Webdynpro?

    Hi All,
    We have an issue here with the data entry profile.
    The current system(ITS with 4.6c) has multiple data entry profile, from which the employee can select the profile according to the personel area,  he is in. ( Employee can have multiple data entry profiles ) .
    But in new frontend Portal, we dont have such option in EP 7 how can we achieve this in ESS- Webdynpro applications.
    Need your valuable inputs on this.
    Regards,
    NR

    Hi,
    The newer version does not allow you to enter multiple ESS Profile. You will have to define one profile for the CVR parameter. If you think you the ESS User needs multiple profiles, its better to revisit those profiles and change them so that each user gets one profile that fits his time entry.
    If you search in this forum, I think one earlier post had a good informative discussion about the same.
    Thanks,
    Ravi

  • ESS~ WebDynpro ~ZERO object reference not possible

    Hello,
    this is about ESS (Mexican) -> IT 021
    I ESS Prtaol I am getting the follwing error.
    Root Cause
    The initial exception that caused the request to fail, was:
       com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Access with ZERO object reference not possible., error key: RFC_ERROR_SYSTEM_FAILURE
        at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:102)
        at com.sap.xss.per.fc.persinfo.FcPersInfo.onCleanup(FcPersInfo.java:499)
        at com.sap.xss.per.fc.persinfo.wdp.InternalFcPersInfo.onCleanup(InternalFcPersInfo.java:536)
        at com.sap.xss.per.fc.persinfo.FcPersInfoInterface.onCleanup(FcPersInfoInterface.java:247)
        at com.sap.xss.per.fc.persinfo.wdp.InternalFcPersInfoInterface.onCleanup(InternalFcPersInfoInterface.java:249)
        ... 38 more
    Inputs to solve this are welcome
    ~Thanks

    Hi ,
    Are you editing ESS WebDynpro applications ? If its a error in the standard component its a product issue and u can raise a OSS message.
    But I doubt , you have edited the same.
    In that case , can u post the code in FcPersonalInfo s interface controller 's onCleanUp function.
    Regards
    Bharathwaj

  • Report on BEx query with 2 structures (one in rows and one in columns)

    Hi, experts! I have to make Crystall report on BEx query with 2 structures, one in columns (with KF's), and one in rows. Is it possible to create such report? Because when I create such report, I cant see fields in structures, only characteristics fields.
    Ok, I found samr problem in another thread. Sorry.
    Edited by: Mikhail Sychev on Dec 5, 2009 9:53 PM

    Hey Flora,
    Happy to hear that its working now.
    Answering your question, again its upto the connection and report format you are using. Based on your question i hope you your report output should be like this.
    You cannot map to two labels for the series, again this report format is possible only in cross tab through Webi. I would suggest you to concatenate the material and month in a dimension in webi like below.
    I have done the concatenation in excel level, i would suggest you to do that in webi. Try to reduce the formula as much in excel.
    or
    If you are using Query browser connection, then i would suggest you to create a separate report which will display the actual vs plan material wise, here you need to pass the material as a prompt.
    Hope this helps in clear, please revert me for any clarification.

  • Report Designer with two Structure in Column

    Hi Experts,
      Is not possible a Report Designer use a query with 2 structure in column ?
      If  i need use two structure in the column, exist a workaround for this case ?
    Tks and best regads ...
    Alex

    Unfortunately not.
    You may try to work around to have set of virtual chars and key figures; but resposne time will not be encouraging.
    Ravi Thotahdri

  • Error  - Material cost estimate with quantity structure

    Hello Gurus!
    Can anyone please help with the following problem:
    I’m trying to do the material cost estimate with quantity structure, but the system is throwing back the message  " There is no exchange rate for exchange rate type P on 1.01.2008: CHF -> EUR". 
    This happens because I have a subcontratation in my routing in CHF, and in transaction OB08, and I don’t had defined that rate (type P CHF –EUR).
    I need to know if there is any solution to the system assumes other Type of Exchange Rate (the last real exchange rate that I have introduced in my system, not the planned!)
    Points will be assigned to the suitable answer.
    Thanks in advance.
    Mary Jane

    Hi Sridhar
    Thanks for your reply.
    In OKEQ for the version 0, I have the rate type M.
    I don't understand why the system throwing back the message  " There is no exchange rate for exchange rate type P on 1.01.2008: CHF -> EUR".!
    Do you know why?
    Thanks and regards
    Mary Jane

  • Material cost estimate with quantity structure (tcode: CK11N)

    Hey dear friends.
    I donu2019t know in which forum I should put my question above.
    In fact, Iu2019m new to SAP PM module.
    Iu2019m trying to create material cost estimate with quantity structure (tcode: CK11N) for a material u201CXu201D.
    This material is manufactured.
    While running the transaction CK11N, I got an error message.
    After analyzing this error message, Iu2019ve realised that somebody had assigned wrong activity types to cost centers which are linked to this material in tcode: CR03, tab: costing.
    So Iu2019ve changed and assigned the right activity types.
    Then, Iu2019ve tried to run the tcode CK11N again. But the system still brings the wrong activity types and seems to ignore the ones that Iu2019ve assignedu2026
    It seems like the old activity types still linked to the cost centers somewhere else than in tcode CR03u2026
    Any idea about what am I mising ?
    Thank's in advance.
    Bahia.

    Dear Bahia,
    If its rate routing means,i guess you must be working in REM scenario.
    So goto CA22,delete the existing operation and then assign the same work center in a new
    operation,check what activity types is it proposing in the rate routing,if its reflecting correctly means
    save the datas.
    Also goto KKF6N--->click the change mode icon and then calculator button to create a preliminary cost
    estimate and then save the datas.
    One of our forum friend has asked you to check the production order read PP master data once
    again,but understand there is no production order concept in REM scenario,only planned orders.
    Then come back with your queries.
    Regards
    Mangalraj.S
    Edited by: Mangalraj.S on Jun 17, 2009 12:05 PM

  • Material Cost Estimate with Quantity Structure (How to download)

    Is there a standard report or feature available in SAP to download the material cost estimate with quantity structure?
    Currently we have to print screen and it is very tedious and can't do analysis with those screenshots.
    Please advice.

    Hi,
    There is a standard report you can use - S_P99_41000111 - Analyze/Compare Material Cost Estimates .
    With this report, you can report the standard cost estimates for a range of materials.
    Good Luck!!!  Assign points if this was a useful input to you.
    Thanks and Regards,
    Bhuvaneswari.S

  • Material cost estimate with Quantiy structure

    Hello All,
    Can anyone please help in the following problem. When we do material cost estimate with quantiy structure, system is throwing message as "source of supply cannot be determined".
    Maximum points will be assigned to the suitable answer.
    Thanks in advance.
    Srinivas

    Hi, Srini,
    Please check in material master data whether this material is in-house produced or externally procured, which can be found in MRP view.
    Please also check your costing variant and valuation variant for material cost estination, I think possibly you chose stratey L FROM Purchasing Info Record. If not, ignor it.
    If it's externally procured, SAP logic is that firstly it will check the source list, then determine the quota arrangement and find proper vendor for the selected material. The error message is possibly caused by missing vendor or wrong quota reason. So please follow the SAP logic to check data one by one.
    Please check the following link on vendor determination in online help document.
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/7e/cb938143a311d189ee0000e81ddfac/frameset.htm
    Please specify if you also used mixed costing for material.
    Good luck!

  • Material cost estimate and mateiral cost estimate with quantity structure

    Hi sap guys,
    What is the difference between material cost estimate and material cost estimate with quantity structure

    Hi
    Both are in one way the same.
    Material cost estimate can be calculated as
    1. Material with quantity structure
    2. Material without quantity structure
    You can get more insight into it at the following link
    http://help.sap.com/saphelp_47x200/helpdata/en/7e/cb938143a311d189ee0000e81ddfac/frameset.htm
    Regards,
    Suraj

  • I need help with event structure. I am trying to feed the index of the array, the index can vary from 0 to 7. Based on the logic ouput of a comparison, the index buffer should increment ?

    I need help with event structure.
    I am trying to feed the index of the array, the index number can vary from 0 to 7.
    Based on the logic ouput of a comparison, the index buffer should increment
    or decrement every time the output of comparsion changes(event change). I guess I need to use event structure?
    (My event code doesn't execute when there is an  event at its input /comparator changes its boolean state.
    Anyone coded on similar lines? Any ideas appreciated.
    Thanks in advance!

    You don't need an Event Structure, a simple State Machine would be more appropriate.
    There are many examples of State Machines within this forum.
    RayR

Maybe you are looking for